Search Results

Search found 19975 results on 799 pages for 'disk queue length'.

Page 206/799 | < Previous Page | 202 203 204 205 206 207 208 209 210 211 212 213  | Next Page >

• Remote install of Ubuntu Server

  - by David Walker

  Hi all, I have a machine located 500 miles away that's running Ubuntu 8.04. I figure it's just about time that I upgrade to the latest LTS. However, there's a software raid (md_raid) in there, and I'm afraid that just a dist-upgrade when I switch over the sources.list will end with catastrophic failure. Like a panic on boot that the raid'd disk can't be read, or something else. First, hoping that's not the case, however, if it ends up happening I'm wondering if there's a means of having someone drop in a Ubuntu 10.04 server install disk, and flip on ssh, and some means for me to hop on and re-run the installer remotely. Is this feasible? If so, what would one need to do aside run apt-get install ssh on the target machine? I do have friends who can be in front of the target machine to initiate the process, just not execute it out.

  Read the article

• grub2 loopback booting ubuntu server iso

  - by Thermionix

  I've got usb-keys setup to multi-boot different linux images using grub2 loopback. The standard ubuntu release isos boot fine, however when attempting to use the server iso it will fail to install saying 'unable to detect cd-media for installation'. the grub.cfg entry; menuentry "ubuntu-12.04-server-amd64" { set isofile="/boot/ubuntu-12.04-server-amd64.iso" loopback loop $isofile linux (loop)/install/vmlinuz file=$isofile/preseed/ubuntu-server.seed ro noprompt noeject -- initrd (loop)/install/initrd.gz } I've attempted to add the following parameters as the fromiso works for debian images on the key iso-scan/filename=/boot/ubuntu-12.04-server-amd64.iso iso-scan/filename=/dev/disk/by-uuid/2859-44B7/boot/ubuntu-12.04-server-amd64.iso fromiso=/dev/disk/by-uuid/2859-44B7/boot/ubuntu-12.04-server-amd64.iso

  Read the article

• How to restore Windows 7 MBR without a CD

  - by Brandon Bertelsen

  I have been playing with Ubuntu for a few weeks now, and I'd like to revert my computer back to it's original - factory - defaults. On the computer I have a recovery partition (it's a netbook). I went through the process of recovery and everything seemed fine. However, when I restart the computer I'm presented with grub rescue > Now, my understanding is that when I installed Ubuntu "side by side" it replaced the MBR or something like it, with GRUB. I've read on a slew of forums, that I need to use a Windows Recovery Disk. Here are my issues: a) I don't have a recovery disk, I have a recovery partition - it's a netbook. b) I don't have an external cd drive. What I do have is a USB key that has about 1gb of space on it. Thanks in advance.

  Read the article

• Beat detection and FFT

  - by Quincy

  So I am working on a platformer game which includes music with beat detection. I am currently using a simple if the energy that is stored in the history buffer is smaller then the current energy there is a beat. The problem with this is that ofcourse if you use songs like rock songs where you have a pretty steady amplitude this isn't going to work. So I looked further and found algorithms splitting the sound into multiple bands using FFT. I then found this : http://en.literateprograms.org/Cooley-Tukey_FFT_algorithm_(C) The only problem I'm having is that I am quite new to audio and I have no idea how to use that to split the signal up into multiple signals. So my question is : How do you use a FFT to split a signal into multiple bands ? Also for the guys interested, this is my algorithm in c# : // C = threshold, N = size of history buffer / 1024 public void PlaceBeatMarkers(float C, int N) { List<float> instantEnergyList = new List<float>(); short[] samples = soundData.Samples; float timePerSample = 1 / (float)soundData.SampleRate; int sampleIndex = 0; int nextSamples = 1024; // Calculate instant energy for every 1024 samples. while (sampleIndex + nextSamples < samples.Length) { float instantEnergy = 0; for (int i = 0; i < nextSamples; i++) { instantEnergy += Math.Abs((float)samples[sampleIndex + i]); } instantEnergy /= nextSamples; instantEnergyList.Add(instantEnergy); if(sampleIndex + nextSamples >= samples.Length) nextSamples = samples.Length - sampleIndex - 1; sampleIndex += nextSamples; } int index = N; int numInBuffer = index; float historyBuffer = 0; //Fill the history buffer with n * instant energy for (int i = 0; i < index; i++) { historyBuffer += instantEnergyList[i]; } // If instantEnergy / samples in buffer < instantEnergy for the next sample then add beatmarker. while (index + 1 < instantEnergyList.Count) { if(instantEnergyList[index + 1] > (historyBuffer / numInBuffer) * C) beatMarkers.Add((index + 1) * 1024 * timePerSample); historyBuffer -= instantEnergyList[index - numInBuffer]; historyBuffer += instantEnergyList[index + 1]; index++; } }

  Read the article

• Sony VAIO is booting directly into Windows without showing grub

  - by Rohan Dhruva

  I bought a new Sony Vaio S series laptop. It uses Insyde H2O BIOS EFI, and trying to install Linux on it is driving me crazy. root@kubuntu:~# parted /dev/sda print Model: ATA Hitachi HTS72756 (scsi) Disk /dev/sda: 640GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 274MB 273MB fat32 EFI system partition hidden 2 274MB 20.8GB 20.6GB ntfs Basic data partition hidden, diag 3 20.8GB 21.1GB 273MB fat32 EFI system partition boot 4 21.1GB 21.3GB 134MB Microsoft reserved partition msftres 5 21.3GB 342GB 320GB ntfs Basic data partition 6 342GB 358GB 16.1GB ext4 Basic data partition 7 358GB 374GB 16.1GB ntfs Basic data partition 8 374GB 640GB 266GB ntfs Basic data partition What is surprising is that there are 2 EFI system partitions on the disk. The sda2 partition is a 20gb recovery partition which loads windows with a basic recovery interface. This is accessible by pressing the "ASSIST" button as opposed to the normal power button. I presume that the sda1 EFI System Partition (ESP) loads into this recovery. The sda3 ESP has more fleshed out entries for Microsoft Windows, which actually goes into Windows 7 (as confirmed by bcdedit.exe on Windows). Ubuntu is installed on sda6, and while installation I chose sda3 as my boot partition. The installer correctly created a sda3/EFI/ubuntu/grubx64.efi application. The real problem: for the life of me, I can't set it to be the default! I tried creating a sda3/startup.nsh which called grubx64.efi, but it didn't help -- on rebooting, the system still boots into windows. I tried using efibootmgr, and that shows as it it worked: root@kubuntu:~# efibootmgr BootCurrent: 0000 BootOrder: 0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager root@kubuntu:~# efibootmgr --create --gpt --disk /dev/sda --part 3 --write-signature --label "GRUB2" --loader "\\EFI\\ubuntu\\grubx64.efi" BootCurrent: 0000 BootOrder: 0002,0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager Boot0002* GRUB2 root@kubuntu:~# efibootmgr BootCurrent: 0000 BootOrder: 0002,0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager Boot0002* GRUB2 However, on rebooting, as you guessed, the machine rebooted directly back into Windows. The only things I can think of are: The sda1 partition is somehow being used Overwrite /EFI/Boot/bootx64.efi and /EFI/Microsoft/Boot/bootmgfw.efi with grubx64.efi [but this seems really radical]. Can anyone please help me out? Thanks -- any help is greatly appreciated, as this issue is driving me crazy!

  Read the article

• USB3 boot device disappears post-grub

  - by JoBu1324

  I have an installation of Ubuntu 12.10 on a USB3 device, and it occasionally disappears during boot, dropping me into busybox. This is what I've been able to figure out so far: During a single boot, the following happened: At the grub2 menu, I typed c and dropped to the grub> prompt I typed ls -l and got a list of all the devices, including partitions and UUIDs - the USB3 partitions were available I escaped back to the boot select menu, selected the default item (ubuntu) and hit enter The screen went black for a second before turning into the purple Ubuntu boot screen with the dots (which usually indicates that the boot will fail. When all is well I don't get the black screen) The boot dropped into BusyBox v1.19.3 with the message `ALERT! /dev/disk/by-uuid/[uuid] does not exist blkid displays all of the partitions except those of the USB3 device, as does ls /dev/disk/by-uuid or any of the alternatives.

  Read the article

• How to list missing partitions?

  - by celebrimbor

  I have installed Ubuntu on one of my partition and Crunchbang on the other partition. As I wanted to make some continuous space, I moved Crunchbang partition and then checked fdisk output which looks like this Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc7996dfa Device Boot Start End Blocks Id System /dev/sda1 * 63 80324 40131 de Dell Utility /dev/sda4 81918 625139711 312528897 f W95 Ext'd (LBA) /dev/sda5 81920 211816447 105867264 83 Linux /dev/sda6 299100160 341043199 20971520 83 Linux /dev/sda7 341045248 625139711 142047232 7 HPFS/NTFS/exFAT I cannot see sda2 and sda3 partition. How to find them?

  Read the article

• ntfsresize volume and size information

  - by antonio

  I am going to resize my sda2 NTFS partition. When gathering info with ntfsresize, I get: ntfsresize --info /dev/sda2 ntfsresize v2013.1.13 (libntfs-3g) Device name : /dev/sda2 NTFS volume version: 3.1 Cluster size : 4096 bytes Current volume size: 21999993344 bytes (22000 MB) Current device size: 23622320128 bytes (23623 MB) Checking filesystem consistency ... Accounting clusters ... Space in use : 10673 MB (48.5%) Collecting resizing constraints ... You might resize at 10672590848 bytes or 10673 MB (freeing 11327 MB). Please make a test run using both the -n and -s options before real resizing! Can you tell me what is the difference between volume and device size? As for device size, 23622320128 bytes / 1000^2 = 23622.3 MB. Why is 23623 MB reported instead of 23622? Note that parted confirms this value: parted /dev/sda2 unit MB p Model: Unknown (unknown) Disk /dev/sda2: 23622MB Sector size (logical/physical): 512B/512B Partition Table: loop Disk Flags: Number Start End Size File system Flags 1 0.00MB 23622MB 23622MB ntfs

  Read the article

• Arrive steering behavior

  - by dbostream

  I bought a book called Programming game AI by example and I am trying to implement the arrive steering behavior. The problem I am having is that my objects oscillate around the target position; after oscillating less and less for awhile they finally come to a stop at the target position. Does anyone have any idea why this oscillating behavior occur? Since the examples accompanying the book are written in C++ I had to rewrite the code into C#. Below is the relevant parts of the steering behavior: private enum Deceleration { Fast = 1, Normal = 2, Slow = 3 } public MovingEntity Entity { get; private set; } public Vector2 SteeringForce { get; private set; } public Vector2 Target { get; set; } public Vector2 Calculate() { SteeringForce.Zero(); SteeringForce = SumForces(); SteeringForce.Truncate(Entity.MaxForce); return SteeringForce; } private Vector2 SumForces() { Vector2 force = new Vector2(); if (Activated(BehaviorTypes.Arrive)) { force += Arrive(Target, Deceleration.Slow); if (!AccumulateForce(force)) return SteeringForce; } return SteeringForce; } private Vector2 Arrive(Vector2 target, Deceleration deceleration) { Vector2 toTarget = target - Entity.Position; double distance = toTarget.Length(); if (distance > 0) { //because Deceleration is enumerated as an int, this value is required //to provide fine tweaking of the deceleration.. double decelerationTweaker = 0.3; double speed = distance / ((double)deceleration * decelerationTweaker); speed = Math.Min(speed, Entity.MaxSpeed); Vector2 desiredVelocity = toTarget * speed / distance; return desiredVelocity - Entity.Velocity; } return new Vector2(); } private bool AccumulateForce(Vector2 forceToAdd) { double magnitudeRemaining = Entity.MaxForce - SteeringForce.Length(); if (magnitudeRemaining <= 0) return false; double magnitudeToAdd = forceToAdd.Length(); if (magnitudeToAdd > magnitudeRemaining) magnitudeToAdd = magnitudeRemaining; SteeringForce += Vector2.NormalizeRet(forceToAdd) * magnitudeToAdd; return true; } This is the update method of my objects: public void Update(double deltaTime) { Vector2 steeringForce = Steering.Calculate(); Vector2 acceleration = steeringForce / Mass; Velocity = Velocity + acceleration * deltaTime; Velocity.Truncate(MaxSpeed); Position = Position + Velocity * deltaTime; } If you want to see the problem with your own eyes you can download a minimal example here. Thanks in advance.

  Read the article

• Ubuntu 12.04 Boot Error

  - by Aman

  My Laptop was working just fine a day back but it started show the following error on booting: error: couldn't read file So, I googled about it and used a Live-CD to use Boot-Repair as told here: "can't read file" error after installation causes system to not boot I was given this link: http://paste.ubuntu.com/1441528/ if there are issues still. I also tried to do it again by a Boot-Repair-Disk this time and now I am getting the following error: error: couldn't read file error: you need to load the kernel first The boot-repair-disk gave me this link: http://paste2.org/p/2609703 if there are further issues.

  Read the article

• Got back Hibernation option, but cannot resume from Hibernate

  - by harisibrahimkv

  In my Ubuntu 12.04, the hibernation option was working well and fine. However, I installed Debian on another partition recently and when I again tried to boot to Ubuntu, I got a message on the boot splash screen saying : The disk drive for / is not ready yet or not present. Continue to wait; or press s to skip mounting or M for manual recovery. After logging into Ubuntu, I find that my hibernation option has gone missing. Is there anyway to recover the hibernation option? EDIT: I solved the disk drive problem and I got the hibernation option back. When I did "sudo pm-hibernate", my system went to hibernation. However, when powering on again, it booted up normally and thus there was no effect of hibernation. How can this be rectified? EDIT1: System - Lenovo ideapad s10-2. EDIT2: /etc/fstab

  Read the article

• problem in array of shooter sprites which contain different colour bubbles

  - by prakash s

  everyone i am developing bubble shooter game in cocos2d I have placed shooter array which contain different color bubbles like this 00000000 it is 8 bubbles array if i tap the screen, first bubbles should move for shooting the target .png .And if i again tap the screen again 2nd position bubble should move for shooting the target.png bubbles,how it will possible for me because i have already created the array of target which contain different color bubbles, here i write the code : - (void)ccTouchesEnded:(NSSet *)touches withEvent:(UIEvent *)event { // Choose one of the touches to work with UITouch *touch = [touches anyObject]; CGPoint location = [touch locationInView:[touch view]]; location = [[CCDirector sharedDirector] convertToGL:location]; // Set up initial location of projectile CGSize winSize = [[CCDirector sharedDirector] winSize]; NSMutableArray * movableSprites = [[NSMutableArray alloc] init]; NSArray *images = [NSArray arrayWithObjects:@"1.png", @"2.png", @"3.png", @"4.png",@"5.png",@"6.png",@"7.png", @"8.png", nil]; for(int i = 0; i < images.count; ++i) { int index = (arc4random() % 8)+1; NSString *image = [NSString stringWithFormat:@"%d.png", index]; CCSprite*projectile = [CCSprite spriteWithFile:image]; //CCSprite *projectile = [CCSprite spriteWithFile:@"3.png" rect:CGRectMake(0, 0,256,256)]; [self addChild:projectile]; [movableSprites addObject:projectile]; float offsetFraction = ((float)(i+1))/(images.count+1); //projectile.position = ccp(20, winSize.height/2); //projectile.position = ccp(18,0 ); //projectile.position = ccp(350*offsetFraction, 20.0f); projectile.position = ccp(10/offsetFraction, 20.0f); // projectile.position = ccp(projectile.position.x,projectile.position.y); // Determine offset of location to projectile int offX = location.x - projectile.position.x; int offY = location.y - projectile.position.y; // Bail out if we are shooting down or backwards if (offX <= 0) return; // Ok to add now - we've double checked position //[self addChild:projectile]; // Determine where we wish to shoot the projectile to int realX = winSize.width + (projectile.contentSize.width/2); float ratio = (float) offY / (float) offX; int realY = (realX * ratio) + projectile.position.y; CGPoint realDest = ccp(realX, realY); // Determine the length of how far we're shooting int offRealX = realX - projectile.position.x; int offRealY = realY - projectile.position.y; float length = sqrtf((offRealX*offRealX)+(offRealY*offRealY)); float velocity = 480/1; // 480pixels/1sec float realMoveDuration = length/velocity; // Move projectile to actual endpoint [projectile runAction:[CCSequence actions: [CCMoveTo actionWithDuration:realMoveDuration position:realDest], [CCCallFuncN actionWithTarget:self selector:@selector(spriteMoveFinished:)], nil]]; // Add to projectiles array projectile.tag = 1; [_projectiles addObject:projectile]; } }

  Read the article

• GPT Not mounting using "normal" GPT mounting techniques 12.04

  - by Roy Markham

  I've got two 2TB drivess: one MBR and the other GPT. sudo blckid /dev/sdb1 returns a blank. gdisk shows: Partition table scan: MBR: protective BSD: not present APM: not present GPT: present Found valid GPT with protective MBR; using GPT. Warning! Secondary partition table overlaps the last partition by 1970 blocks! You will need to delete this partition or resize it in another utility. Disk /dev/sdb: 3907027055 sectors, 1.8 TiB Logical sector size: 512 bytes Disk identifier (GUID): 38A1113D-B5E9-4B69-ABFF-ACB27AFB3DDD Partition table holds up to 128 entries First usable sector is 34, last usable sector is 3907027021 Partitions will be aligned on 8-sector boundaries Total free space is 2014 sectors (1007.0 KiB) Number Start (sector) End (sector) Size Code Name 1 34 262177 128.0 MiB 0C01 Microsoft reserved part 2 264192 3907028991 1.8 TiB 0700 Basic data partition mounting via fstab or -t gives same error when using NTFS or NTFS-3g "NTFS signature is missing" GParted says one partition is overwriting another, yet windows shows no errors at all. The drive is also mounted easily via MacOs (triple boot)

  Read the article

• Join Us for the Next Quarterly Customer Update Webcast

  - by michelle.huff

  Join us for the next Oracle Content Management Quarterly Customer Update Webcast scheduled for this coming January 19 & 20, 2010. In this webcast we'll bring you up to speed on the latest updates and changes made available these past few months. Additionally, we'll cover the new features and certifications in the latest ODC & ODDC 10.1.3.5.1 release, as well as the upcoming Enterprise Content Management Suite 11gR1 PS3 (patch set 3) release. Register Today! Americas / EMEA time zones: Customer Update January 19, 2010 9:00am US PT / 12:00pm US ET / 17:00 London Length: 1 hour *Please use your corporate email address to register. Asia-Pacific time zones: Customer Update (Repeat Webcast) January 20, 2010 1:00pm Sydney AET, 10:00am Singapore (Jan 19, 2010 @ 6:00pm US PT) Length: 1 hour *Please use your corporate email address to register Missed Previous Customer Quarterly Updates? Get caught up on Oracle & ECM news. View a recording or the presentation from previous Webcasts held since June 2008 (available from My Oracle Support).

  Read the article

• monitor screen dead.....not even shows bios screen

  - by megatronous

  Re: /host/ubuntu/disks/root.disk does not exist :( ALERT! /host/ubuntu/disks/root.siak does not exist. Dropping to a shell! BusyBox v1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell (ash) (initramfs) alll thought the above problem was solved my issue now is..when i booted my pc again after this solving this to solve the above problem i had pressed e in the grub menu then corrected the partition then after starting i did sudo grub-update then i made some automatic update updates then in next reboot......my screen had gone blank .... and i am not even able to see bios screen....in the start ...the monitior just stays blank..................i have even tried disconnectiong my hard disk but still not able to get the display......solution required ....urgently.....

  Read the article

• Symlink are using both locations?

  - by Tiago Rossi

  Ive made a research and didnt found any answers, so I decided to ask here. To make you know, the /dev/sda2 disk of my WHM/Cpanel webserver got 100% full. The /var/ folder are the /dev/sda2 and I've found the reason of that isse are the /var/lib/mysql folder. To fix it I need to move the /var/lib/mysql folder from /dev/sda2 to /home/ where I have a lot of space in disk. Then I used the command lines: service mysql stop cp -r -p /var/lib/mysql/ /home/databasesmysql/ mv /var/lib/mysql /var/lib/mysql.backup/ ln -s /home/databasesmysql/ /var/lib/mysql service mysql start Ok, now to check if its running at the new location I just renamed the /var/lib/mysql to /var/lib/mysql.backup and MySQL stopped working. Also when I rename the /home/databasesmysql/ folder MySQL also stop to work. I dont know whats happening, the symlink are using both locations? Thanks very much.

  Read the article

• Autodetect/mount SDCards and run script for them on Linux

  - by Brendan

  Hey Everyone, I'm currently running SME Server, and need to have a script run upon the attachment of SD Cards to my server. The script itself works fine (it copies the contents of the cards), but the automounting and execution of the script is where I'm having issues. The I have a USB hub consisting of 10 USB ports; that shows up as: [root@server ~]# lsusb Bus 004 Device 002: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 055: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 051: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 050: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 001: ID 0000:0000 (The hub is the TERMINUS TECHNOLOGY INC entries) As I cannot plug SD Cards directly into the server; I use a USB to SD card attachement (10 of them) plugged into the hub to read the cards. Upon pluggig the 10 attachments (without cards) into the hub; lsusb yields the following: [root@server ~]# lsusb Bus 004 Device 002: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 073: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 072: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 071: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 070: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 069: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 068: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 067: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 066: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 065: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 064: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 055: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 051: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 050: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 001: ID 0000:0000 As you can see, the readers are the "Gensys Logic, Inc" entries. Plugging in an SD card to a reader doesn't affect lsusb (it reads exactly as above), however my system recognises the cards fine; as indicated by dmesg: Attached scsi generic sg11 at scsi54, channel 0, id 0, lun 0, type 0 USB Mass Storage device found at 73 SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through sdd: sdd1 SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through sdd: sdd1 SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through sdd: sdd1 If I manually mount sdd1 (mount /dev/sdd1 /somedirectory/) this works fine. What I'm really after is a solution that automounts each of the cards as they are inputted into the reader; and executes a script for them (this will involve copying their contents to another directory). My problem is that I don't know how to do this; I don't think udev will work as the USB devices don't change; if I could somehow get udev working with /dev/disk/by-path/ however I think this is doable (it seems to keep constant entries). ls /dev/disk returns: pci-0000:00:1d.7-usb-0:4.1.1.1:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.1.2:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.1.3:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.1.4:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.2:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.3:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.4:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.2:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.3:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.4:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.4:1.0-scsi-0:0:0:0-part1 pci-0000:0b:01.0-scsi-0:0:1:0 pci-0000:0b:01.0-scsi-0:0:1:0-part1 pci-0000:0b:01.0-scsi-0:0:1:0-part2 From above, we can see I have only one card plugged into the reader (pci-0000:00:1d.7-usb-0:4.4:1.0-scsi-0:0:0:0-part1). Going mount /dev/disk/by-path/pci-0000\:00\:1d.7-usb-0\:4.4\:1.0-scsi-0\:0\:0\:0-part1 Works and places the card under /media/usbdisk/, however: mount /dev/disk/by-path/pci-0000\:00\:1d.7-usb-0\:4.4\:1.0-scsi-0\:0\:0\:0-part1 slot1/ doesn't work, and returns "mount: can't get address for /dev/disk/by-path/pci-0000" Any ideas and solutions would be great, I've seen the knowledge of a lot of the guys on here before so I'm hopeful someone can help me out. Thanks

  Read the article

• Unable to install Ubuntu 12.10 on windows 8 machine/ error no5

  - by JOBIN VARGHESE

  installing crashes at halfway of 'copying files' showing an i\o device error error no5; there was problem in beginning of installation too, ubuntu was not detecting the installed windows 8. my system is a dell inspiron 5520 laptop ,with 1 tb WDC hard disk in GPT ,with EFI . my current partition is like 102 mb EFI SYSTEM partition 200 gb Windows 8 ntfs 22 gb root Ext4 8 gb swap 20 db home Ext4 680 gb ntfs Drive for storing all my files. i tried both dvd disc and usb drive, both resulted in same error. inbuild dell hardware diagnosis utility showed both hard disk and dvd drive as healthy what may be the reason and how can i install ubuntu along side my windows 8?

  Read the article

• How to fix 'grub error file not found' when installing 12.04?

  - by Tomasz Grabowski

  i'm trying to install Ubuntu. I don't know if it is important, but i'm trying to install it on external HDD. In the end i have external bootable HDD which only displays: error: file not found grub recovery> From the beginning: I've downloaded ubuntu-12.04-desktop-i386.iso I've used LiLi USB Creator (LinuxLive) to create bootable pendrive from that image I've bootet from it, it works I've clicked "Try ubuntu", it works too. I've used GParted to look over drivers (disks) My primary embedded disk is seen as /dev/sda My attached external disk as /dev/sdb My PenDrive as /dev/sdc I've created partitions on /dev/sdb Fist partition for system (over 200GiB) Second was there already (it's xsf, and i don't want to touch it :P) Third is extended partition, with 1 locital partiton (10GiB) for swap I've started installation i've choose "somethin else" in ... i belive secound screeb then is selected /dev/sdb as boot disk for first partiton of /dev/sdb i set i want ext3 file system, i've check "formattin" checkbox, and mount path set to "/" firs logical partiton set as swap partition After installation finished, i restarted my computer. When i boot from my primary disc it's work ok, my previous operating system - vista - works ok. When i set my BIOS to boot from my external disc, i only get that message: error: file not found grub recovery> I've try to reinstall it, but didn't help... In desperation, i've try to read a bit about that "grub recovery" command-line and experiment a bit... I'm not sure if this has had any point, or if it give you some information (notice, that i don't know what i'm doing :P ) when i've type command: insmod (hd1,1)/boot/grub/linux.mod i've get message: unknown filesystem the same with: insmod (hd1,msdos1)/boot/grub/linux.mod the same with: insmod ext3 but i get no message after command: insmod ext2 ... notice that i really don't know what this command exactly do, but than i thought that maybe if i reinstall ubuntu with ext2 filesystem, it will work. I've done that, but symptoms are the same. I've go back to that Live version of ubuntu, filesystem and basics directories seems to be present on /dev/sdb1 ... i'm completely unfamiliar with GRUB. I'm also don't know which wersion of GRUB it is, i hope there is only one version on ubuntu-12.04-desktop-i386.iso Any help? Thax

  Read the article

• Impossible to install Ubuntu 10.10 dual boot with Windows 7 on new Acer desktop computer

  - by Don Myers

  My brother has a brand new Acer Desktop with Windows 7. I have done many installs (40+) of Ubuntu starting with 8.10, and have never run into this. I've spent three hours trying to do a dual boot install of 10.10. When you get to the place where you normally would choose to install as a dual boot or overwrite the existing information on the hard drive, that block is just blank. Nothing. No choices even to do a manual partition setup. If you try to go on you get the message "No root file system is defined. Please correct this from the partitioning menu." but there is nothing in the partitioning menu. I tried a good 10.04 disc also. Same thing happens with it. I ran a gparted live cd, and it shows the hard drive as sda with 3 partitions on the original. sda1 is a small partition called PQService. sda2 is another small partition called System Reserved, and GParted says it is the boot partition. sda3 is the main partation with the operating system (Windows 7) and all of the empty space. There is a little unallocated space at the very beginning and very end of the hard drive. If I go to places in the Live CD, it shows a 640 gb hard disk called Acer, but it also shows a 640 gb hard disk called system reserved. They are the same disk. There is just one hard drive. If you click properties in the System Reserved 640 gb, it shows all information as unknown. I had to change the boot order in the bios in order to run the live cd. The hard drive instead of being listed as such is listed as Raid:Raid Ready. Something the way this computer is set up is preventing Ubuntu from being able to identify the hard drive partitions at all to do an install, even if you were not doing a dual boot and just wanted to overwrite Windows. Is this a bug that needs reported? This is a major problem for me and my brother, but also for Ubuntu if new users want to Ubuntu and find they cannot install it.

  Read the article

• KVM Virtual guest Paused on Reboot

  - by David Hamilton

  I'm running REHL 6 and just installed a Ubuntu Server Guest via KVM set to start at boot. This works correctly and the guest loads, but it loads "paused" and requires that I manually un-pause it. Can someone give me a hint as to how I can I get the Guest OS to actually become active on boot? Here is the libvert dump as requested...Also tried libvert auto-start --- no effect. <domain type='kvm' id='1'> <name>MailServer</name> <uuid>a61dae75-1f5c-d536-718f-3c615d9b4868</uuid> <memory>4194304</memory> <currentMemory>4194304</currentMemory> <vcpu>4</vcpu> <os> <type arch='x86_64' machine='rhel6.0.0'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/libexec/qemu-kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='none'/> <source file='/home/MailServer/MailServer-1.img'/> <target dev='hda' bus='ide'/> <alias name='ide0-0-0'/> <address type='drive' controller='0' bus='0' unit='0'/> </disk> <disk type='block' device='cdrom'> <driver name='qemu' type='raw'/> <target dev='hdc' bus='ide'/> <readonly/> <alias name='ide0-1-0'/> <address type='drive' controller='0' bus='1' unit='0'/> </disk> <controller type='ide' index='0'> <alias name='ide0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <interface type='bridge'> <mac address='52:54:00:cd:f9:9f'/> <source bridge='br0'/> <target dev='vnet0'/> <model type='virtio'/> <alias name='net0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <source path='/dev/pts/1'/> <target port='0'/> <alias name='serial0'/> </serial> <console type='pty' tty='/dev/pts/1'> <source path='/dev/pts/1'/> <target port='0'/> <alias name='serial0'/> </console> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='5900' autoport='yes'/> <sound model='ac97'> <alias name='sound0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </sound> <video> <model type='cirrus' vram='9216' heads='1'/> <alias name='video0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <alias name='balloon0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </memballoon> </devices> <seclabel type='dynamic' model='selinux'> <label>system_u:system_r:svirt_t:s0:c211,c271</label> <imagelabel>system_u:object_r:svirt_image_t:s0:c211,c271</imagelabel> </seclabel></domain>

  Read the article

• Grub messed up on dual boot machine - can't boot live usb

  - by Sam

  I have a laptop on which I had Win 7 and Ubuntu 12.04 installed. The hdd has two partitions (one primary and one extended). Grub wasn't loaing initially so I ran the boot disk repair tool which seemed to sort it out. However, I mistakenly removed python (long story) from the Ubuntu OS and this obviously messed up Ubuntu a lot. So I decided to reintsall both Win7 and Ubuntu 12.04 in an attempt to get things back fresh. Win 7 went fine, but now when I try and use the Live USB to install Ubuntu I get: error: no such device: grub rescue I guess grub is still there despite the Win 7 reinstall and it can't find the partition for Ubuntu (which I deleted prior to the fresh install). I have tried fixmbr in windows console and the boot-repair-disk utility, but no joy. I cannot boot the live usb so no access to linux. A real mess. Any suggestions from the community?

  Read the article

• Join Us for the Next Quarterly Customer Update Webcast

  - by michelle.huff

  Join us for the next Oracle Content Management Quarterly Customer Update Webcast scheduled for this coming June 30 / July 1 2010. Don't miss this chance to get an overview on the latest updates to Oracle Content Management. We'll be covering the latest ECM Suite 11g release - highlighting the Universal Content Management (UCM) and Universal Records Management releases. Register Today! Americas / EMEA time zones: Customer Update June 30, 2010 9:00am US PDT / 12:00pm US EDT / 16:00 GMT Length: 1 hour *Please use your corporate email address to register. Asia-Pacific time zones: Customer Update (Repeat Webcast) July 1, 2010 12:00pm Sydney AEST, 10:00am Singapore (June 30, 2010 @ 7:00pm US PDT) Length: 1 hour *Please use your corporate email address to register Please Note: If you have attended previous Quarterly Customer Update Webcasts, we are now using a new web conference system, WebEx, to host the meeting. Missed Previous Customer Quarterly Updates? Get caught up on Oracle & ECM news. View a recording or the presentation from previous Webcasts held since June 2008 (available from My Oracle Support).

  Read the article

• Windows 7 can't boot with Ubuntu on different hard drive

  - by dellphi

  I use a dual boot with two hard disks and two OS is Ubuntu 10.04 and Windows 7. Windows 7 installed on the first disk, first partition. Grub is installed on a second hard disk MBR, and Ubuntu installed on an extended partition on a second hard drive. When I select Windows 7 on the Grub menu, the HDD lamp lights up briefly and then black screen on the monitor, with the status of the keyboard is still functioning. Until now (with the default boot from first HDD), I have to press F12 to get into the Grub to run Linux on a second HDD. output of fdisk -l grub.cfg. I want to retain Grub to remain on the second HDD, and Windows 7 could choose from the menu provided by Grub. But I do not get how, I hope anyone can help.

  Read the article

• Can't see my partitions after grub recovery

  - by dimbo

  I stupidly inserted the windows CD into my dual boot Ubuntu 11.10 / windows xp system. I just wanted to see if I could install windows on my external usb HD, but didn't actually go ahead with the install. It seems like the windows CD messed up my MBR and I had to use boot-repair and the ubuntu 11.10 live CD to gain access to ubuntu again. It seems to boot up a little differently (slower) but works. However, I now cant see any of my partitions in nautilus (there are 3). When I open gparted, it just shows my whole hard drive as unallocated (I know it has a windows partition that works and my ubuntu partition that I am using now). If I insert a usb pen, it is also not visible in nautilus but in gparted shows up as a FAT32 partition (which is correct although I cannot access it). sudo fdisk -l gives the following : demian@dimbo-TP:~$ sudo fdisk -l [sudo] password for demian: omitting empty partition (5) Disk /dev/sda: 320.1 GB, 320072933376 bytes 240 heads, 63 sectors/track, 41345 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x877b877b Device Boot Start End Blocks Id System /dev/sda1 * 63 63842309 31921123+ 7 HPFS/NTFS/exFAT /dev/sda2 63844350 133484084 34819867+ 5 Extended /dev/sda3 127636488 133484084 2923798+ 82 Linux swap / Solaris /dev/sda4 133484085 625137344 245826630 83 Linux /dev/sda5 63844352 123445247 29800448 83 Linux /dev/sda6 123447296 127635455 2094080 82 Linux swap / Solaris Disk /dev/sdb: 8100 MB, 8100249600 bytes 12 heads, 40 sectors/track, 32960 cylinders, total 15820800 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdb1 * 5992 15820799 7907404 c W95 FAT32 (LBA) Here is my grub.conf file. Like I said before, I had to use the 'boot-repair' utility with the live cd to get grub working again. I think that this utility maybe created a new grub for me because the startup is definitely not the same. The screen goes blank for a while, and then the ubuntu loading dots come up for a brief moment (instead of during the whole startup process) before the dektop is displayed. Anyway : # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=10 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.0.0-12-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a linux /boot/vmlinuz-3.0.0-12-generic root=UUID=5349ff67-b7b7-489f-a881-ae49c1dcd84a ro quiet splash vt.handoff=7 initrd /boot/initrd.img-3.0.0-12-generic } menuentry 'Ubuntu, with Linux 3.0.0-12-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a echo 'Loading Linux 3.0.0-12-generic ...' linux /boot/vmlinuz-3.0.0-12-generic root=UUID=5349ff67-b7b7-489f-a881-ae49c1dcd84a ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.0.0-12-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Microsoft Windows XP Professional (on /dev/sda1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 72A89361A89322A1 drivemap -s (hd0) ${root} chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### How can I get things back to normal. Thanks, Demian.

  Read the article

< Previous Page | 202 203 204 205 206 207 208 209 210 211 212 213  | Next Page >