Search Results

Search found 23762 results on 951 pages for 'network speed'.

Page 207/951 | < Previous Page | 203 204 205 206 207 208 209 210 211 212 213 214  | Next Page >

  • The Great Divorce

    - by BlackRabbitCoder
    I have a confession to make: I've been in an abusive relationship for more than 17 years now.  Yes, I am not ashamed to admit it, but I'm finally doing something about it. I met her in college, she was new and sexy and amazingly fast -- and I'd never met anything like her before.  Her style and her power captivated me and I couldn't wait to learn more about her.  I took a chance on her, and though I learned a lot from her -- and will always be grateful for my time with her -- I think it's time to move on. Her name was C++, and she so outshone my previous love, C, that any thoughts of going back evaporated in the heat of this new romance.  She promised me she'd be gentle and not hurt me the way C did.  She promised me she'd clean-up after herself better than C did.  She promised me she'd be less enigmatic and easier to keep happy than C was.  But I was deceived.  Oh sure, as far as truth goes, it wasn't a complete lie.  To some extent she was more fun, more powerful, safer, and easier to maintain.  But it just wasn't good enough -- or at least it's not good enough now. I loved C++, some part of me still does, it's my first-love of programming languages and I recognize its raw power, its blazing speed, and its improvements over its predecessor.  But with today's hardware, at speeds we could only dream to conceive of twenty years ago, that need for speed -- at the cost of all else -- has died, and that has left my feelings for C++ moribund. If I ever need to write an operating system or a device driver, then I might need that speed.  But 99% of the time I don't.  I'm a business-type programmer and chances are 90% of you are too, and even the ones who need speed at all costs may be surprised by how much you sacrifice for that.   That's not to say that I don't want my software to perform, and it's not to say that in the business world we don't care about speed or that our job is somehow less difficult or technical.  There's many times we write programs to handle millions of real-time updates or handle thousands of financial transactions or tracking trading algorithms where every second counts.  But if I choose to write my code in C++ purely for speed chances are I'll never notice the speed increase -- and equally true chances are it will be far more prone to crash and far less easy to maintain.  Nearly without fail, it's the macro-optimizations you need, not the micro-optimizations.  If I choose to write a O(n2) algorithm when I could have used a O(n) algorithm -- that can kill me.  If I choose to go to the database to load a piece of unchanging data every time instead of caching it on first load -- that too can kill me.  And if I cross the network multiple times for pieces of data instead of getting it all at once -- yes that can also kill me.  But choosing an overly powerful and dangerous mid-level language to squeeze out every last drop of performance will realistically not make stock orders process any faster, and more likely than not open up the system to more risk of crashes and resource leaks. And that's when my love for C++ began to die.  When I noticed that I didn't need that speed anymore.  That that speed was really kind of a lie.  Sure, I can be super efficient and pack bits in a byte instead of using separate boolean values.  Sure, I can use an unsigned char instead of an int.  But in the grand scheme of things it doesn't matter as much as you think it does.  The key is maintainability, and that's where C++ failed me.  I like to tell the other developers I work with that there's two levels of correctness in coding: Is it immediately correct? Will it stay correct? That is, you can hack together any piece of code and make it correct to satisfy a task at hand, but if a new developer can't come in tomorrow and make a fairly significant change to it without jeopardizing that correctness, it won't stay correct. Some people laugh at me when I say I now prefer maintainability over speed.  But that is exactly the point.  If you focus solely on speed you tend to produce code that is much harder to maintain over the long hall, and that's a load of technical debt most shops can't afford to carry and end up completely scrapping code before it's time.  When good code is written well for maintainability, though, it can be correct both now and in the future. And you know the best part is?  My new love is nearly as fast as C++, and in some cases even faster -- and better than that, I know C# will treat me right.  Her creators have poured hundreds of thousands of hours of time into making her the sexy beast she is today.  They made her easy to understand and not an enigmatic mess.  They made her consistent and not moody and amorphous.  And they made her perform as fast as I care to go by optimizing her both at compile time and a run-time. Her code is so elegant and easy on the eyes that I'm not worried where she will run to or what she'll pull behind my back.  She is powerful enough to handle all my tasks, fast enough to execute them with blazing speed, maintainable enough so that I can rely on even fairly new peers to modify my work, and rich enough to allow me to satisfy any need.  C# doesn't ask me to clean up her messes!  She cleans up after herself and she tries to make my life easier for me by taking on most of those optimization tasks C++ asked me to take upon myself.  Now, there are many of you who would say that I am the cause of my own grief, that it was my fault C++ didn't behave because I didn't pay enough attention to her.  That I alone caused the pain she inflicted on me.  And to some extent, you have a point.  But she was so high maintenance, requiring me to know every twist and turn of her vast and unrestrained power that any wrong term or bout of forgetfulness was met with painful reminders that she wasn't going to watch my back when I made a mistake.  But C#, she loves me when I'm good, and she loves me when I'm bad, and together we make beautiful code that is both fast and safe. So that's why I'm leaving C++ behind.  She says she's changing for me, but I have no interest in what C++0x may bring.  Oh, I'll still keep in touch, and maybe I'll see her now and again when she brings her problems to my door and asks for some attention -- for I always have a soft spot for her, you see.  But she's out of my house now.  I have three kids and a dog and a cat, and all require me to clean up after them, why should I have to clean up after my programming language as well?

    Read the article

  • I need to move an entity to the mouse location after i rightclick

    - by I.Hristov
    Well I've read the related questions-answers but still cant find a way to move my champion to the mouse position after a right-button mouse-click. I use this code at the top: float speed = (float)1/3; And this is in my void Update: //check if right mouse button is clicked if (mouse.RightButton == ButtonState.Released && previousButtonState == ButtonState.Pressed) { // gets the position of the mouse in mousePosition mousePosition = new Vector2(mouse.X, mouse.Y); //gets the current position of champion (the drawRectangle) currentChampionPosition = new Vector2(drawRectangle.X, drawRectangle.Y); // move champion to mouse position: //handles the case when the mouse position is really close to current position if (Math.Abs(currentChampionPosition.X - mousePosition.X) <= speed && Math.Abs(currentChampionPosition.Y - mousePosition.Y) <= speed) { drawRectangle.X = (int)mousePosition.X; drawRectangle.Y = (int)mousePosition.Y; } else if (currentChampionPosition != mousePosition) { drawRectangle.X += (int)((mousePosition.X - currentChampionPosition.X) * speed); drawRectangle.Y += (int)((mousePosition.Y - currentChampionPosition.Y) * speed); } } previousButtonState = mouse.RightButton; What that code does at the moment is on a click it brings the sprite 1/3 of the distance to the mouse but only once. How do I make it move consistently all the time? It seems I am not updating the sprite at all. EDIT I added the Vector2 as Nick said and with speed changed to 50 it should be OK. I tried it with if ButtonState.Pressed and it works while pressing the button. Thanks. However I wanted it to start moving when single mouse clicked. It should be moving until reaches the mousePosition. The Edit of Nick's post says to create another Vector2, But I already have the one called mousePosition. Not sure how to use another one. //gets a Vector2 direction to move *by Nick Wilson Vector2 direction = mousePosition - currentChampionPosition; //make the direction vector a unit vector direction.Normalize(); //multiply with speed (number of pixels) direction *= speed; // move champion to mouse position if (currentChampionPosition != mousePosition) { drawRectangle.X += (int)(direction.X); drawRectangle.Y += (int)(direction.Y); } } previousButtonState = mouse.RightButton;

    Read the article

  • Java 2D Tile Collision

    - by opiop65
    I have been working on a way to do collision detection forever, and just can't figure it out. Here's my simple 2D array: for (int x = 0; x < 16; x++) { for (int y = 0; y < 16; y++) { map[x][y] = AIR; if(map[x][y] == AIR) { air.draw(x * tilesize, y * tilesize); } } } for (int x = 0; x < 16; x++) { for (int y = 6; y < 16; y++) { map[x][y] = GRASS; if(map[x][y] == GRASS) { grass.draw(x * tilesize, y * tilesize); } } } for (int x = 0; x < 16; x++) { for (int y = 8; y < 16; y++) { map[x][y] = STONE; if(map[x][y] == STONE) { stone.draw(x * tilesize, y * tilesize); } } } I want to do it with rectangles, and using the intersect() method, but how would I go about adding rectangles to all the tiles? Edit: My player moves like this: if(input.isKeyDown(Input.KEY_W)) { shiftY -= delta * speed; idY = (int) shiftY; if(shift == true) { shiftY -= delta * runspeed; } if(isColliding == true) { shiftY += delta * speed; } } if(input.isKeyDown(Input.KEY_S)) { shiftY += delta * speed; idY = (int) shiftY; if(shift == true) { shiftY += delta * runspeed; } if(isColliding == true) { shiftY -= delta * speed; } } if (input.isKeyDown(Input.KEY_A)) { steve = left; shiftX -= delta * speed; idX = (int) shiftX; if(shift == true) { shiftX -= delta * runspeed; } if(isColliding == true) { shiftX += delta * speed; } } if (input.isKeyDown(Input.KEY_D)) { steve = right; shiftX += delta * speed; idX = (int) shiftX; if(shift == true) { shiftX += delta * runspeed; } if(isColliding == true) { shiftX -= delta * speed; } } (I have tried my own collision code, but its horrible. Doesn't work in the slightest)

    Read the article

  • Why does Ubuntu really slow down the rest of my home network?

    - by tympaniplayer
    I have a ubuntu Dekstop and a Windows 7 Desktop. The windows 7 is connected via wireless adapter and the ubuntu dekstop is connected via ethernet. The wireless adapter is capable of 300Mbps link speed. When my ubuntu is connected to the interet, the network becomes very very slow. I have a 15 Mbps cable broadband connection. I have had many devices connected at one with no problem, yet this one connection seems to be wreaking havoc.

    Read the article

  • Windows XP ad-hoc networking

    - by Abhinav
    I have been using a Windows XP ad-hoc wireless network to connect my Macbook to the internet. Everything was working fine until after a restart of the XP machine, the network stopped appearing in the "Choose a wireless network" screen. It does not show up as an available network on the Macbook as well. But when I try to create a new network it shows me the network name. Creating a new network does not work either.

    Read the article

  • How to get higher download rate than upload rate

    - by user23950
    i'm using bandwidthplace.com to measure my internet speed. And here it is: Download Speed: 422 kbps (52.8 KB/sec transfer rate) Upload Speed: 202 kbps (25.3 KB/sec transfer rate) Can you please explain to me how did they get the 52.8 transfer rate. And how do I get to lower the upload speed in order for me to get higher download speed.

    Read the article

  • How to configure multiple iSCSI Portal Groups on a EqualLogic PS6100?

    - by kce
    I am working on a migration from a VMware vSphere environment to a Hyper-V Cluster utilizing Windows Server 2012 R2. The setup is pretty small, an EqualLogic PS6100e and two Dell PowerConnect 5424 switches and handful of R710s and R620s. The SAN was configured as a non-RFC1918 network that is not assigned to our organization and since I am working on building a new virtualization environment I figured that this would be an appropriate time to do a subnet migration. I configured a separate VLAN and subnet on the switches and the two previously unused NICs on the PS6100's controllers. At this time I only have a single Hyper-V host cabled in but I can successfully ping the PS6100 from the host. From the PS6100 I can ping each of the four NICs that currently on the storage network. I cannot connect the Microsoft iSCSI Initiator to the Target. I have successfully added the Target Portals (the IP addresses of PS6100 NICs) and the Targets are discovered but listed as inactive. If I try to Connect to them I get the following error, "Log onto Target - Connection Failed" and ISCSIPrt 1 and 70 events are recorded in the Event Log. I have verified that access control to the volume is not the problem by temporarily disabling it. I suspect the problem is with the Portal Group IP address which is still listed as Group Address of old subnet (I know, I know I might be committing the sin of the X/Y problem but everything else looks good): RFC3720 has this to say about Network Portal and Portal Groups: Network Portal: The Network Portal is a component of a Network Entity that has a TCP/IP network address and that may be used by an iSCSI Node within that Network Entity for the connection(s) within one of its iSCSI sessions. A Network Portal in an initiator is identified by its IP address. A Network Portal in a target is identified by its IP address and its listening TCP port. Portal Groups: iSCSI supports multiple connections within the same session; some implementations will have the ability to combine connections in a session across multiple Network Portals. A Portal Group defines a set of Network Portals within an iSCSI Network Entity that collectively supports the capability of coordinating a session with connections spanning these portals. Not all Network Portals within a Portal Group need participate in every session connected through that Portal Group. One or more Portal Groups may provide access to an iSCSI Node. Each Network Portal, as utilized by a given iSCSI Node, belongs to exactly one portal group within that node. The EqualLogic Group Manager documentation has this to say about the Group IP Address: You use the group IP address as the iSCSI discovery address when connecting initiators to iSCSI targets in the group. If you modify the group IP address, you might need to change your initiator configuration to use the new discovery address Changing the group IP address disconnects any iSCSI connections to the group and any administrators logged in to the group through the group IP address. Which sounds equivalent to me (I am following up with support to confirm). I think a reasonable explanation at this point is that the Initiator can't complete the connection to the Target because the Group IP Address / Network Portal is on a different subnet. I really want to avoid a cutover and would prefer to run both subnets side-by-side until I can install and configure each Hyper-V host. Question/s: Is my assessment at all reasonable? Is it possible to configure multiple Group IP Addresses on the EqualLogic PS6100? I don't want to just change it as it will disconnect the remaining ESXi hosts. Am I just Doing It Wrong(TM)?

    Read the article

  • How do I speed up load times on roaming profiles with Active Directory?

    - by user65712
    I've done some reading and apparently the main obstacle to fast remote profile syncing is that Samba takes a long time to transfer lots of little files like cookies. After reading Roaming Profiles: Best Practices , I plan to use Folder Redirection, but I want my users to be able to login as rapidly as possible, even if it means that their data is still coming in when they reach their desktop. Is there a way to do this with GPO or a third party add-on that can load user profile data faster/speed up the login process for users?

    Read the article

  • Is minimum latency fixed by the speed of light?

    - by JavaRocky
    Suppose i had a fiber optic link from one side of the planet to the other side of the planet. Is it safe to say, that with current technology, the latency of communication can never be reduced? Understand that a fiber optic cable is not a perfect medium thus data only travels close to the speed of light. Also lets consider that i will not be drilling a hole thru the center of the earth and it is just running along the ocean.

    Read the article

  • Is there anyway way to speed up Exchange 2007's Load Generator tool?

    - by JohnM
    I'm running Load Generator to test our new deployment before going live and the initialization process has been running for two days and is only at 25% for ~58000 user test. Does anyone know of a way to speed up this process? Surely it shouldn't take this long. Currently, I've got it running with one master and two remote servers and they aren't peaking out on CPU or Network utilization. Any help you could provide would be greatly appreciated.

    Read the article

  • Do I need a Gigabit router with a 24Mbps down and 7Mbps upload speed cable modem?

    - by djangofan
    Do I need a Gigabit port capable wireless router with a 24Mbps down and 7Mbps upload speed cable modem? Does anyone know how to calculate this? FYI, I wont be using the wireless connection from my main computer system. My computer will connect via a hard wire into the router (of the wireless variety), which in turn is connected to the cable modem. My research suggests that the 100 Mbps port can easily handle it. Is that true?

    Read the article

  • Output the number of cores and speed of a server?

    - by Sam
    I have access to another college's standalone server and am running several experiments on it. However, I don't know how many cores or the speed of the cores in the machine. Is there a way to get that information through the command line? Right now I'm accessing it through SSH.

    Read the article

  • Can I combine two LANs into one to get double speed?

    - by Salaam
    Hey guys, I have 2 LANs in my own PC & 2 Routers (TP-Link WR941N each) with 2 internet accounts (512Kbps each) connected to the same ISP signal & company using NanoStation 5 from ubnt. As you know the connections work separately by default! (I use Windows 7 64bit) Can I merge them to get double speed (download/upload simultaneously) using regedit or special software or any other method? I'd be much appreciated if u could help me doing that Best Regards, Salaam

    Read the article

  • Does just-ping determine a website's accessibility and/or speed?

    - by Yves
    While looking for a webhost I wanted one that had good connectivity around the world, and ran their (shared hosting) test IPs on just-ping.com. This is a part of a sample result: München, Germany: Packets lost (10%) 24.8 24.9 25.1 178.xx.xx.xxx Cologne, Germany: Okay 5.6 5.7 5.8 178.xx.xx.xxx New York, U.S.A.: Packets lost (30%) 80.3 80.4 80.7 178.xx.xx.xxx Stockholm, Sweden: Packets lost (100%) 178.xx.xx.xxx Santa Clara, U.S.A.: Packets lost (30%) 158.1 158.4 158.7 178.xx.xx.xxx Vancouver, Canada: Packets lost (70%) 189.4 189.5 189.5 178.xx.xx.xxx London, United Kingdom: Packets lost (100%) Am I correct in thinking that hosts with several "Packets lost" messages from different locations have less stable or slower connections than hosts with all "Okays"?

    Read the article

  • Difference in Ubuntu One sync-speed between Natty and other versions?

    - by bisi
    I was wondering if anyone had had the chance to compare performance between Ubuntu One upload speeds on Natty Narwhal and any other version of Ubuntu? Also, any difference on how well it connects? [don't shoot me for asking ;)] I am hesitant about upgrading on my regular workstation, but if it improves my user-experience with U1, I might be willing to risk it... Thanks for all informed opinions :) bisi

    Read the article

  • Order Unlocked iPhone 4S From Apple Online Store. $649, No Contract, Any Network.

    - by Gopinath
    Apple opened the flood gates of iPhone 4S! Now you can buy the unlocked iPhone 4S directly from Apple instead of buying them from grey market. The Apple US Online store has started accepting order for unlocked iPhone 4S and at the moment the expected shipping time is around 1 to 2 weeks. Price of the phones starts from $649 for 16GB and goes up to $849 for 64GB version. These unlocked phones are free from monthly contracts, works on any GSM network around the globe. Sorry CDMA networks, unlocked iPhone 4S is not yet ready for you! Its a good move from Apple. This helps people from staying away from multi-year contracts and also visitors returning from USA now can buy an original unlocked iPhone to use in their home countries. Buy iPhone 4S from Apple Online Store This article titled,Order Unlocked iPhone 4S From Apple Online Store. $649, No Contract, Any Network., was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

    Read the article

  • How often is software speed evident in the eyes of customers?

    - by rwong
    In theory, customers should be able to feel the software performance improvements from first-hand experience. In practice, sometimes the improvements are not noticible enough, such that in order to monetize from the improvements, it is necessary to use quotable performance figures in marketing in order to attract customers. We already know the difference between perceived performance (GUI latency, etc) and server-side performance (machines, networks, infrastructure, etc). How often is it that programmers need to go the extra length to "write up" performance analyses for which the audience is not fellow programmers, but managers and customers?

    Read the article

  • How to protect a peer-to-peer network from inappropriate content?

    - by Mike
    I’m developing a simple peer-to-peer app in .Net which should enable users to share specific content (text and picture files). As I've learned with my last question, inappropriate content can “relatively” easily be identified / controlled in a centralized environment. But what about a peer-to-peer network, what are the best methods to protect a decentralized system from unwanted (illegal) content? At the moment I only see the following two methods: A protocol (a set of rules) defines what kind of data (e.g. only .txt and jpg-files, not bigger than 20KB etc.) can be shared over the p2p-network and all clients (peers) must implement this protocol. If a peer doesn’t, it gets blocked by other peers. Pro: easy to implement. Con: It’s not possible to define the perfect protocol (I think eMail-Spam filters have the same problem) Some kind of rating/reputation system must be implemented (similar to stackoverflow), so “bad guys” and inappropriate content can be identified / blocked by other users. Pro: Would be very accurate. Con: Would be slow and in my view technically very hard to implement. Are there other/better solutions? Any answer or comment is highly appreciated.

    Read the article

  • Is this an apt-get issue or network issue?

    - by zharvey
    I just installed my first Ubuntu server (12.04) instance and immediately am noticing a few things: Running apt-get install or update fails (see below) Running ifconfig produces peculiar IP addresses starting with 10.x.x.x and my router does not see the server at all in its "Attached Devices" page (its a consumer grade Netgear) When I run apt-get I get 50+ of the following errors: Failed to fetch <some-http-url. Temporary failure resolving <blah.ubuntu.com I read up on this error for 12.04, and found some similar posts on this forum and on serverfault that recommended going into /etc/resolv.conf and adding an entry: nameserver 8.8.8.8 To my surprise, I found that /etc/resolve.conf was a symlink pointing to somewhere else and I had to delete it first, then create a new one with the entry indicated above. I restarted the server and tried running apt-get again: same results. How do I start diagnosing the problem (I'm a relatively new Linux/Ubuntu user)? Additional details that may help: This is actually a virtual machine running as a VirtualBox guest OS The physical host that is running this VM is my laptop which has a wireless connection; I'm wondering if (somehow) the laptop is getting the network wirelessly, but perhaps either the VBox VM and/or the Ubuntu server OS isn't configured for wireless and so nothing is "getting through"? Thanks in advance for any pointers! Edit: Here is a snapshot of my VM's Network settings (only Adapter 1 has any information populating its fields, so I assume my VM has only 1 adapter): Here is the output when I run ifconfig from the terminal: And here is the output when I run route from the terminal: Running ping google.com:

    Read the article

  • Which language and platform features really boosted your coding speed?

    - by Serge
    The question is about delivering working code faster without any regard for design, quality, maintainability, etc. Here is the list of things that help me to write and read code faster: Language: static typing, support for object-oriented and functional programming styles, embedded documentation, short compile-debug-fix cycle or REPL, automatic memory management Platform: "batteries" included (text, regex, IO, threading, networking), thriving community, tons of open-source libs Tools: IDE, visual debugger, code-completion, code navigation, refactoring

    Read the article

< Previous Page | 203 204 205 206 207 208 209 210 211 212 213 214  | Next Page >