Search Results

Search found 17625 results on 705 pages for 'techno log'.

Page 207/705 | < Previous Page | 203 204 205 206 207 208 209 210 211 212 213 214  | Next Page >

• How do I align my partition table properly?

  - by Jorge Castro

  I am in the process of building my first RAID5 array. I've used mdadm to create the following set up: root@bondigas:~# mdadm --detail /dev/md1 /dev/md1: Version : 00.90 Creation Time : Wed Oct 20 20:00:41 2010 Raid Level : raid5 Array Size : 5860543488 (5589.05 GiB 6001.20 GB) Used Dev Size : 1953514496 (1863.02 GiB 2000.40 GB) Raid Devices : 4 Total Devices : 4 Preferred Minor : 1 Persistence : Superblock is persistent Update Time : Wed Oct 20 20:13:48 2010 State : clean, degraded, recovering Active Devices : 3 Working Devices : 4 Failed Devices : 0 Spare Devices : 1 Layout : left-symmetric Chunk Size : 64K Rebuild Status : 1% complete UUID : f6dc829e:aa29b476:edd1ef19:85032322 (local to host bondigas) Events : 0.12 Number Major Minor RaidDevice State 0 8 16 0 active sync /dev/sdb 1 8 32 1 active sync /dev/sdc 2 8 48 2 active sync /dev/sdd 4 8 64 3 spare rebuilding /dev/sde While that's going I decided to format the beast with the following command: root@bondigas:~# mkfs.ext4 /dev/md1p1 mke2fs 1.41.11 (14-Mar-2010) /dev/md1p1 alignment is offset by 63488 bytes. This may result in very poor performance, (re)-partitioning suggested. Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=16 blocks, Stripe width=48 blocks 97853440 inodes, 391394047 blocks 19569702 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=0 11945 block groups 32768 blocks per group, 32768 fragments per group 8192 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968, 102400000, 214990848 Writing inode tables: ^C 27/11945 root@bondigas:~# ^C I am unsure what to do about "/dev/md1p1 alignment is offset by 63488 bytes." and how to properly partition the disks to match so I can format it properly.

  Read the article

• keyboard mappings are totally screwed after updating to kde4

  - by zeonglow

  I recently upgraded from KDE 3.5 to KDE 4, and I have been having weird issues with my keyboard. In one of the virtual consoles e.g. when I press ctrl + alt 1 , I can type perfectly, but in KDE, several of the number keys don't work, the left and right arrows don't work either. When I press the right arrow key in xev I get this: KeyRelease event, serial 34, synthetic NO, window 0x3600001, root 0x6f, subw 0x0, time 903459, (111,55), root:(115,836), state 0x10, keycode 114 (keysym 0x1008ff11, XF86AudioLowerVolume), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False When I press the '3' key it toggles my Bookmarks toolbar in Firefox, in xev I get this: KeyPress event, serial 34, synthetic NO, window 0x3600001, root 0x6f, subw 0x0, time 999968, (94,115), root:(98,896), state 0x10, keycode 12 (keysym 0x1008ff30, XF86Favorites), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyRelease event, serial 34, synthetic NO, window 0x3600001, root 0x6f, subw 0x0, time 1000032, (94,115), root:(98,896), state 0x10, keycode 12 (keysym 0x1008ff30, XF86Favorites), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False As this is deeper down, changing the type of keyboard in the KDE meun's has no effect. I'm slowly beginning to wade through the mountains of documentation about the X keyboard model, but there has to be a better way. Does anyone no what it is? Edit: 1234567890 ! after deleting the entire .kde folder. but only until I change the Keyboard settings from the "system settings" applet, then its hosed full time. Regardless of what I set the settings too. (restore to default settings doesn't) 2nd Edit: I'm using Gentoo AMD64, I was upgrading from KDE 3.5 KDE 4.2. I think I had manual settings before, although I didn't change anything. I was originally running KDE without HAL until that stop working a year or so ago. The only customisation I made was to set the multimedia keys to control Amarok. 3rd Edit $ grep xkb /var/log/Xorg.0.log (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" Xorg.0.log has this to say: (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. (WW) Disabling Mouse1 (WW) Disabling Keyboard1 My Xorg.conf has this in it. Identifier "Keyboard1" Driver "kbd" Option "AutoRepeat" "500 30" # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "gb"

  Read the article

• Bad certificate error with RabbitMQ using SSL

  - by David Tinker

  I am trying to get RabbitMQ working with SSL on a couple of Gentoo servers. I get the following error in /var/log/rabbitmq/rabbit@...log when I try to connect to the management console using https: SSL: certify: ssl_connection.erl:1641:Fatal error: bad certificate I followed the instructions here: http://www.rabbitmq.com/ssl.html The annoying thing is that I have 2 cloned servers and it is working on one and not the other. As far as I can tell the machines are configured identically. I wrote a script to generate the certs etc. and have run it on both. I am not using client certificates. Anyone know how I can figure out whats wrong with my certificate(s)? I am using Erlang 15.2, RabbitMQ 2.7.9, OpenSSL 0.9.8k.

  Read the article

• Hanging page loads every n loads

  - by Christian

  Hi Guys I recently moved my site to a new server (Apache 2, PHP5, MySQL5). The site is an Invision based forum. Every few posts / topics it just hangs. The data has been written because if you stop and reload, the post / thread is there. I thought it was a write issue initially, but nope. So, the data is written but the page load never completes. It doesn't leave the page where the data has been input. Whats the best way to trouble shoot this issue? The only thing I have done recently is reduce my MySQL timeouts, but I can't see that being an issue as the values are still big enough and there are no mentions of timeouts in the MySQL log. (For the record there is nothing in PHP's error log either) Thanks in advance!

  Read the article

• Website requests not reaching IIS?

  - by pete the pagan-gerbil

  To start off with a confession, I am not a server admin - just a developer tasked with getting to the root of a problem. Please be gentle! I have an intranet ASP.NET website running in IIS on a virtual machine. The website is not accessed very often (the last IIS log file was modified nearly six months ago). Both the IP address and Host header value are now failing to return the website, and the IIS log still doesn't show any more recent activity. The virtual machine was moved to a different physical location a few months ago, and the IP address for it has changed. Could this be what has broken access to the site? What else should I be checking to solve this? I don't have totally unrestricted access to the building's network settings, structures, etc. I would be grateful for any advice, even if I can't use it myself it'll improve my knowledge of what's going on behind the scenes!

  Read the article

• Cannot exit X server, restart, shutdown or drop to tty when VGA monitor active

  - by terdon

  I have a strange problem. If I connect an external VGA monitor to my laptop, exiting the X environment in any way crashes the computer. For example, say I am working with my two monitors (the laptop's and one connected to my VGA port) active. Hitting Ctrl+Alt+F Key should take me down to a tty. What actually happens is that the VGA screen goes blank, as you would expect, but the laptop screen, although still on, shows nothing. I know the screen is on because it is slightly more illuminated than when it is off. When in this state, I can do nothing to regain access to the machine. I have tried: Ctrl+F Key (and even Ctrl+Alt+F Key, just in case) combinations and none seem to have any effect. Ctrl+Alt+Del : Nothing Magic SysRq key: Nothing Blindly typing my username and password and trying to reboot/shutdown or restart GDM or MDM: Nothing The only thing that works is a hard reset. The exact same behavior occurs when kiling the X server through Ctrl+Alt+Backspace, rebooting or shutdown. There is no difference if I reboot/shutdown/log out using the WM's graphical menu or if I use the shutdown or rebootcommands. It is also not WM-dependent. I have the same problem using Cinnamon, Gnome 3, MATE and xfce4. It is, however, VGA dependent. I have tried connecting another VGA monitor and have the same problem. I do not, however, have this problem if a screen is connected to the DisplayPort. It is, therefore, a VGA specific issue. To make things even stranger, this only occurs when both screens are active. If either the laptop screen or the VGA monitor is inactive the problem goes away. Finally, this problem arose when I installed the latest Linux Mint Debian (LMDE). It did not occur with the previous release of LMDE. I am not sure what has changed since I used the same kernel version in both releases (I had upgraded the kernel while on the previous release) and, I think, the same nvidia drivers. Oh, and yes, I have updated the nvidia driver. Hardware: Dell M4500 laptop CPU: Intel Core i7 RAM: 8GB Graphics: nVidia GT216 [Quadro FX 880M] Software: LMDE, kernel 3.2.0-2-amd64 Xorg: 1.11.4 nVidia kernel: 295.20-1+3.2.9-1 Possibly relevant files: /var/log/Xorg.0.log ~/.xsession-errors Does anyone have any ideas how to fix this? Thanks in advance for any help.

  Read the article

• DSL connection not working in 10.04

  - by Mussnoon

  I use a wired PPPoE connection to connect to the Internet. What I need to do on Windows to connect to it is put in static IP address, gateway, subnet mask and DNS servers for my LAN card. Next I have to create a dialer for a PPPoE connection, put in my user name, the service name and the password, and "dial" this connection. And it works fine. On Ubuntu 10.04, however, I have tried setting things up in a similar fashion - put in all static addresses for the "automatic" wired connection, then put in user name, service name, password for a "DSL" connection. It worked for a while, then stopped. I have tried putting in all the details within the DSL configuration dialog, same thing happened - it worked for a while, then stopped. I have tried deleting the ethernet connection and only keeping the DSL one with all the numbers put in place, same thing happened - it worked for a while, then stopped. Each of the times, when it connected, it connected randomly, after trying a few times, and either stopped working within a few minutes, or after I had rebooted. I have deleted and remade the connection dozens of times - even with different names, but nothing seems to be working. I have also tried pppoeconf from the terminal, didn't work. I have checked /var/log/kern.log, but nothing changes in the file when I try to connect. I have also checked /sbin/route, but gedit can't even open it (says it can't figure the character encoding...). The "connection established" notification pops up from the top right corner, the same way as when the computer is actually connected to a network. Can anyone figure what's wrong and how it can be solved?

  Read the article

• Http 400 'Bad Request' and win32status 1450 when larger messages are sended to a WCF service

  - by Tim Mahy

  we sometimes receive Http 400 bad request resultcodes when posting a large file (10mb) to a WCF service hosted in IIS 6. We can reproduce this using SOAP UI and it seems that it is unpredictable when this happens. In our WCF log the call is not received, so we believe that the request does not reach the ASP.NET nor WCF runtime. This happens on multiple websites on the same machine each having their own application pool. All IIS settings are default, only in ASP.NET and WCF we allow bigger readerQuota's etc.... The win32status that is logged in the IIS log is 1450 which we think means "error no system resources". So now the question: a) how can we solve this b) (when a is not applicable :) ) which performance counters or logs are usefull to learn more about this problem? greetings, Tim

  Read the article

• How do you author HDR content?

  - by Nathan Reed

  How do you make it easy for your artists to author content for an HDR renderer? What kinds of tools should you provide, and what workflows need to change, in going from LDR to HDR? Note that I'm not asking about the technical aspects of implementing an HDR renderer, but about best practices for creating materials and lighting in HDR. I've googled around a bit, but there doesn't seem to be much about this topic on the web. Can anyone point me to some good resources on this, or share their own experiences? Some specific points: Lighting - how can lighting artists pick HDR light colors? Do they have a standard LDR color picker and then a multiplier? Is the multiplier in gamma or linear space? Maybe instead of a multiplier it's a log-luminance? Or a physical brightness level, like the number of lumens? How will they know what multiplier/luminance/brightness is "correct" for a given light? Materials - how can texture artists make emissive color maps, such as neon signs, TV screens, skyboxes, etc? Can you paint one as a regular LDR (8-bit-per-channel) image and apply a multiplier (or log-luminance, etc.)? Are there cases where it's necessary to actually paint HDR images? If so, how do you go about this in Photoshop (or other software)?

  Read the article

• Management Reporter Installation – Lessons Learned Part II - Dynamics GP

  - by Ryan McBee

  After feeling pretty good about my deployment skills of Management Reporter for Dynamics GP a few weeks ago, I ran into two additional lessons learned that I wanted to share. First, on another new deployment, I got the error shown below which says “An error occurred while creating the database.  View the installation log for additional information.”  This problem initially pointed me to KB 2406948 which did not provide resolution. After several hours of troubleshooting, I found there is an issue if the defaults database locations in SQL Server are set to the root of a drive. You will want to set the default to something like the following to get it installed; C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA.  My default database locations for the data and log files were indeed sitting on the H:\ and I:\ drives. To change this property in your SQL Server Instance you need to open SQL Server Management Studio, right click on the server, and choose properties and then database settings. When I initially got the error, I briefly considered creating the ManagementReporter database by hand, but experience tells me that would have created more headaches down the road. The second problem I ran into with this particular deployment of Management Reporter happened when I started the FRx conversion utility.  The errors reads “The ‘Microsoft.ACE.OLEDB.12.0’ provider is not registered on the local machine. I had a suspicion that this error was related to the fact FRx uses outdated technology and I happened to be on a new install of Server 2008 R2.  A knowledge base search quickly pointed me to KB 2102486. The resolution for this Management Reporter issue was to install the Microsoft Access Database Engine Redistributable, by following the site below. http://www.microsoft.com/downloads/details.aspx?familyid=C06B8369-60DD-4B64-A44B-84B371EDE16D&displaylang=en

  Read the article

• Why does bash invocation differ on AIX when using telnet vs ssh

  - by Philbert

  I am using an AIX 5.3 server with a .bashrc file set up to echo "Executing bashrc." When I log in to the server using ssh and run: bash -c ls I get: Executing bashrc . .. etc.... However, when I log in with telnet as the same user and run the same command I get: . .. etc.... Clearly in the telnet case, the .bashrc was not invoked. As near as I can tell this is the correct behaviour given that the shell is non-interactive in both cases (it is invoked with -c). However, the ssh case seems to be invoking the shell as interactive. It does not appear to be invoking the .profile, so it is not creating a login shell. I cannot see anything obviously different between the environments in the two cases. What could be causing the difference in bash behaviour?

  Read the article

• How can I move along an angled collision at a constant speed?

  - by Raven Dreamer

  I have, for all intents and purposes, a Triangle class that objects in my scene can collide with (In actuality, the right side of a parallelogram). My collision detection and resolution code works fine for the purposes of preventing a gameobject from entering into the space of the Triangle, instead directing the movement along the edge. The trouble is, the maximum speed along the x and y axis is not equivalent in my game, and moving along the Y axis (up or down) should take twice as long as an equivalent distance along the X axis (left or right). Unfortunately, these speeds apply to the collision resolution too, and movement along the blue path above progresses twice as fast. What can I do in my collision resolution to make sure that the speedlimit for Y axis movement is obeyed in the latter case? Collision Resolution for this case below (vecInput and velocity are the position and velocity vectors of the game object): // y = mx+c lowY = 2*vecInput.x + parag.rightYIntercept ; ... else { // y = mx+c // vecInput.y = 2(x) + RightYIntercept // (vecInput.y - RightYIntercept) / 2 = x; //if velocity.Y (positive) greater than velocity.X (negative) //pushing from bottom, so push right. if(velocity.y > -1*velocity.x) { vecInput = new Vector2((vecInput.y - parag.rightYIntercept)/2, vecInput.y); Debug.Log("adjusted rightwards"); } else { vecInput = new Vector2( vecInput.x, lowY); Debug.Log("adjusted downwards"); } }

  Read the article

• Silverlight Cream for June 22, 2011 -- #1111

  - by Dave Campbell

  In this Issue: Kunal Chowdhury, Beth Massi, Mike Taulty, Xpert360, and Erno de Weerd. Above the Fold: Silverlight: "Silverlight, HTML and the WebBrowser Control for Offline Apps" Mike Taulty WP7: "Windows Phone 7 (Mango) Tutorial - 18 - Know about various Phone Tasks" Kunal Chowdhury LightSwitch: "How to Create a Simple Audit Trail (Change Log) in LightSwitch" Beth Massi From SilverlightCream.com: Windows Phone 7 (Mango) Tutorial - 18 - Know about various Phone Tasks Kunal Chowdhury has number 18 in his Mango series up and is discussing WP7.1 Microsoft.Phone.Tasks namespace classes How to Create a Simple Audit Trail (Change Log) in LightSwitch Beth Massi's latest is a demo of building an audit trail to track changes to records in LightSwitch Silverlight, HTML and the WebBrowser Control for Offline Apps Mike Taulty takes a good hard look at the WebBrowser control ... and all the permutations and gyrations. If you're using or going to use this control, you definitely want to read this article. PivotViewer Shorts Part 5: Invert Facet Category Selections Xpert360 has his 5th tutorial up on PivotViewer, covering the topic of inverting the facet category's selections... per reader request. Windows Phone 7: Drawing graphics for your application with Inkscape – Part III: Backgrounds Erno de Weerd has his 3rd tutorial in his series using Inkscape to draw graphics for your WP7 app... this one is on Background images, and staying within in the Marketplace guidelines of course Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Multiple CAS servers with Microsoft Exchange and selective authorization

  - by John Wilcox

  I have a Microsoft Exchange 2010 organization within one Microsoft Windows domain and I have users accessing it through OWA. For simplicity lets say I currently have one CAS server (CAS 1) which is accessible only through a VPN connection. Lets call the users connecting to the first CAS group a. For some users though, I need to install another CAS server (CAS 2) so that they can connect without using a VPN connection. Lets call those users group b. What I need to achieve is that group a can only log in to CAS 1 and group b can only log in to CAS 2. Now I know that one can disable/enable OWA per user but in my case that is not enough because OWA must be enabled for both groups.

  Read the article

• How do i disable intel graphics in a hybrid graphics setup?

  - by Eshwar

  Hi, I have a Dell Vostro 3700 version A10. The relevant bits from lspci -v | grep VGA are: 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) and 01:00.0 VGA compatible controller: nVidia Corporation GT216 [GeForce GT 330M] (rev a2) so as you can see this is one of those hybrid graphics laptops. Now, I have no interest in any kind of switching. I would like to completely disable the Intel Graphics thats on the processor. I checked in the xorg.log file and it shows that the intel card is in use. from lsmod i see it uses the i915 module. I tried blacklisting that module in /etc/modprobe.d/blacklist.conf but that didn't really work because i still couldn't use the nvidia card for display. I wish there was a BIOS option to disable, but there isn't. Some people have also suggested changing the SATA mode to compatibility, but that does not work either in this case as the intel vga controller still shows up in lspci I tried setting the busid manually in the /etc/X11/xorg.conf file but it still didn't work. It gave me an error that said something along the lines of screen not detected. any bits of xorg.log that you'd like me to attach? So what I am looking for is some solution that allows me to completely disable the use of the intel vga controller. if it was blocked somehow it'd be nice. as if it were not present. Any suggestions? I am desperate here actually. Because I cannot use the HDMI port right now on my laptop for that reason. My guess is this applies to desktops that also have Core i5 processors with onchip graphics as well as dedicated graphics cards. How would they go about solving the problem?

  Read the article

• How to find out why Apache crashes

  - by sanders

  How can I find out why my Apache webserver crashes? Sorry about my first post. Here is what I am doing: I am running xampp on windows xp. I was working on this tutorial and when i got to page 13 of the pdf version it crashed. I cant see anything weird in my error.log nor in my access log. When i go to my localhost on my machine it straight away crashes. Any Idea's? This is what windows adds to the fault report: AppName: apache.exe AppVer: 2.2.11.0 ModName: php_pdo_mysql.dll ModVer: 5.2.8.8 Offset: 0000250a

  Read the article

• Xubuntu 12.04 : Random boot to black screen

  - by Thibaud Ruelle

  My xubuntu 12.04 has worked flawlessly since install in September. However, lately I randomly have the following boot issue : The computer boots to grub, and after choosing xubuntu either boots normally or boots to a black screen. Here are some observations I have made : The black screen seems to happen randomly. The black screen does not seem to happen in safe mode (- nomodeset in grub). The black screen does not allow me to ctrl + alt + F1-6 into a terminal. The black screen allows me to use SysRq keys (Alt + SysRq + K does not work though). The black screen often happens on first boot in several hours and the computer usually boots normally after a RSEINUB. When the computer boots I get "SP5100 TCO timer: mmio address 0xfec000f0 already in use" at startup and "Could not write bytes: broken pipe" at shutdown. However research on these errors did not yield answers to my particular issue. Comparing Xorg.0.log (successful boot) and Xorg.0.log.old (black screen), and reading the answers to similar problem, it seems that I might have a X driver issue. However the system worked flawlessly since lately. Additional info on my system : ACER AO722 C62kk Operating system : 3.2.0-31-generic ubuntu Edit : I made a fresh install of Xubuntu 12.04 x64, the issue is still there ... (I have a separate /home so config. files were not erased). Edit 2 : I followed troubleshooting blank screen, so my new observations are without quiet and splash in grub : When the system boots normally, the screen goes black after grub then lights up and displays text information then goes to login screen. (After that the desktop starting time vary substantially, which is new and may be a separate issue ?). When the boot fails, after grub the screen goes black, lights up, goes black, lights up again and most times goes black again. At this point it responds to Alt+SysReq K by lighting up but no more, and has to be rebooted through Alt+SysReq+ RSEINUB. Thank you for your time and attention in advance ! Thibaud Ruelle

  Read the article

• Server Problems

  - by nardone25

  Hello everyone in serverfault. I am having a big issue right now and I hope you guys can help. Well I got a call at 7:15am today stating that person can't log in. Then my cell phone start to ring like crazy. So when I got in the server room my ac wasn't working. It was 100 dgrees Luckly I have two UPS that will shutdown my lefthands and servers when it get 95. I am running two left-hand sans, I have two servers machines running VMware ESX. Here is my problem, I booted the server back up when the room was at 68 and only administrator and two IT techs can log on to any desktop. I do get an permissions error from who every logs on. What should I do?

  Read the article

• unexpected EOF and end of document

  - by WASasquatch

  I have been fiddling with this code for a few days. Mind you I am a beginner. I just want to get my script to be able to download a remote file, and scan MineCraft plugins. I got the scan plugins to work, but I'm having two other issues. One, I can't get the mc_addplugin to work correctly, and I get a Unexpected EOF and unexpected end of document when running any other command besides mc_scanplugins or mc_start bash: -c: line 0: unexpected EOF while looking for matching `"' bash: -c: line 1: syntax error: unexpected end of file Help would be so much appreciated! Thanks in advance. #!/bin/bash # /etc/init.d/craftbukkit # version 0.9.1 2012-07-06 (YYYY-MM-DD) ### BEGIN INIT INFO # Provides: craftbukkit # Required-Start: $local_fs $remote_fs # Required-Stop: $local_fs $remote_fs # Should-Start: $network # Should-Stop: $network # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: Starts craftbukkit server # Description: Starts and controls the craftbukkit server ### END INIT INFO # SETTINGS SERVICE='craftbukkit-1.2.5-R1.0.jar' OPTIONS='nogui' USERNAME='smith' # LIST ALL THE WORLDS IN YOUR CRAFTBUKKIT SERVER FOLDER WORLDS[1]='world' WORLDS[2]='world_nether' WORLDS[3]='world_the_end' WORLDS[4]='flat_world' MCPATH='/var/www/servers/Foundation' PLUGINSPATH='/var/www/servers/Foundation/plugins' TEMPPLUGINS='/var/www/servers/Foundationplugins/temp_plugins' BACKUPPATH='/var/www/servers/Foundation/backup' CPU_COUNT=2 INVOCATION="java -Xmx2024M -Xms2024M -XX:+UseConcMarkSweepGC -XX:+CMSIncrementalPacing -XX:ParallelGCThreads=$CPU_COUNT -XX:+AggressiveOpts -jar $SERVICE $OPTIONS" ME=`whoami` as_user() { if [ $ME == $USERNAME ] ; then bash -c "$1" else su - $USERNAME -c "$1" fi } mc_start() { if pgrep -u $USERNAME -f $SERVICE > /dev/null then echo "$SERVICE is already running!" else echo "Starting $SERVICE..." cd $MCPATH as_user "cd $MCPATH && screen -dmS craftbukkit $INVOCATION" sleep 7 if pgrep -u $USERNAME -f $SERVICE > /dev/null then echo "$SERVICE is now running." else echo "Error! Could not start $SERVICE!" fi fi } mc_saveoff() { if pgrep -u $USERNAME -f $SERVICE > /dev/null then echo "$SERVICE is running... suspending saves" as_user "screen -p 0 -S craftbukkit -X eval 'stuff \"say The server is preforming a backup. Server going to read-only mode. Do not build...\"\015'" as_user "screen -p 0 -S craftbukkit -X eval 'stuff \"save-off\"\015'" as_user "screen -p 0 -S craftbukkit -X eval 'stuff \"save-all\"\015'" sync sleep 10 else echo "$SERVICE is not running. Not suspending saves." fi } mc_save() { if pgrep -u $USERNAME -f $SERVICE > /dev/null then echo "$SERVICE is running... Saving worlds..." as_user "screen -p 0 -S craftbukkit -X eval 'stuff \"save-all\"\015'" sync sleep 10 echo "Save complete!" else echo "$SERVICE is not running. Cannot save!" fi } mc_saveon() { if pgrep -u $USERNAME -f $SERVICE > /dev/null then echo "$SERVICE is running... re-enabling saves" as_user "screen -p 0 -S craftbukkit -X eval 'stuff \"save-on\"\015'" as_user "screen -p 0 -S craftbukkit -X eval 'stuff \"say Server backup has completed. Server going to read-write mode. You can now continue building...\"\015'" else echo "$SERVICE is not running. Not resuming saves." fi } mc_stop() { if pgrep -u $USERNAME -f $SERVICE > /dev/null then echo "Stopping $SERVICE" as_user "screen -p 0 -S craftbukkit -X eval 'stuff \"say $SERVERNAME is shutting down in 30 seconds! Please stop what you are doing. Check back later, we'll be back!\"\015'" as_user "screen -p 0 -S craftbukkit -X eval 'stuff \"save-all\"\015'" sleep 30 as_user "screen -p 0 -S craftbukkit -X eval 'stuff \"stop\"\015'" sleep 7 else echo "$SERVICE was not running." fi if pgrep -u $USERNAME -f $SERVICE > /dev/null then echo "Error! $SERVICE could not be stopped." else echo "$SERVICE is stopped." fi } mc_update() { if pgrep -u $USERNAME -f $SERVICE > /dev/null then echo "$SERVICE is running! Will not start update." else MC_SERVER_URL=http://dl.bukkit.org/latest-rb/craftbukkit.jar as_user "cd $MCPATH && wget -q -O $MCPATH/craftbukkit_server.jar.update $MC_SERVER_URL" if [ -f $MCPATH/craftbukkit_server.jar.update ] then if `diff $MCPATH/$SERVICE $MCPATH/craftbukkit_server.jar.update >/dev/null` then echo "You are already running the latest version of $SERVICE. Update anyway? [Y/n]" select yn in "Yes" "No"; do case $yn in Yes ) as_user "mv $MCPATH/$SERVICE $MCPATH/${SERVICE}_old.jar" as_user "mv $MCPATH/craftbukkit_server.jar.update $MCPATH/$SERVICE" echo "$SERVICE updated successfully!"; break;; No ) echo "The update was not installed! Removing temporary files and exiting..." as_user "rm $MCPATH/craftbukkit_server.jar.update" exit;; esac done else as_user "mv $MCPATH/$SERVICE $MCPATH/${SERVICE}_old.jar" as_user "mv $MCPATH/craftbukkit_server.jar.update $MCPATH/$SERVICE" echo "$SERVICE updated successfully!" fi else echo "$SERVICE update could not be downloaded." fi fi } mc_addplugin() { if pgrep -u $USERNAME -f $SERVICE > /dev/null then echo "$SERVICE is running! Please stop the service before adding a plugin." else echo "Paste the URL to the .JAR Plugin..." read JARURL JARNAME=$(basename "$JARURL") if [ -d "$TEMPPLUGINS" ] then as_user "cd $PLUGINSPATH && wget -r -A.jar $JARURL -o temp_plugins/$JARNAME" else as_user "cd $PLUGINSPATH && mkdir $TEMPPLUGINS && wget -r -A.jar $JARURL -o temp_plugins/$JARNAME" fi if [ -f "$TMPDIR/$JARNAME" ] then if [ -f "$PLUGINSPATH/$JARNAME" ] then if `diff $PLUGINSPATH/$JARNAME $TMPDIR/$JARNAME >/dev/null` then echo "You are already running the latest version of $JARNAME." else NOW=`date "+%Y-%m-%d_%Hh%M"` echo "Are you sure you want to overwrite this plugin? [Y/n]" echo "Note: Your old plugin will be moved to the "$TEMPPLUGINS" folder with todays date." select yn in "Yes" "No"; do case $yn in Yes ) as_user "mv $PLUGINSPATH/$JARNAME $TEMPPLUGINS/${JARNAME}_${NOW} && mv $TEMPPLUGINS/$JARNAME $PLUGINSPATH/$JARNAME"; break;; No ) echo "The plugin has not been installed! Removing temporary plugin and exiting..." as_user "rm $TEMPPLUGINS/$JARNAME"; exit;; esac done echo "Would you like to start the $SERVICE now? [Y/n]" select yn in "Yes" "No"; do case $yn in Yes ) mc_start; break;; No ) "$SERVICE not running! To start the service run: /etc/init.d/craftbukkit start"; exit;; esac done fi else echo "Are you sure you want to add this new plugin? [Y/n]" select yn in "Yes" "No"; do case $yn in Yes ) as_user "mv $PLUGINSPATH/$JARNAME $TEMPPLUGINS/${JARNAME}_${NOW} && mv $TEMPPLUGINS/$JARNAME $PLUGINSPATH/$JARNAME"; break;; No ) echo "The plugin has not been installed! Removing temporary plugin and exiting..." as_user "rm $TEMPPLUGINS/$JARNAME"; exit;; esac done echo "Would you like to start the $SERVICE now? [Y/n]?" select yn in "Yes" "No"; do case $yn in Yes ) mc_start; break;; No ) "$SERVICE not running! To start the service run: /etc/init.d/craftbukkit start"; exit;; esac done fi else echo "Failed to download the plugin from the URL you specified!" exit; fi fi } mc_scanplugins() { if [ "$(ls -A $PLUGINSPATH)" ] then shopt -s nullglob PLUGINS=($PLUGINSPATH/*.jar) i=1 for f in "${PLUGINS[@]}" do echo "${i}: $f" PLUGIN[$i]=$f i=$(( $i + 1 )) done echo "Enter the ID of a plugin you want removed, or any other key to cancel." read INPUT if [ ! -z "${INPUT##*[!0-9]*}" ] then if [ -f "${PLUGIN[INPUT]}" ] then echo "Removing plugin..." JAR=$(basename ${PLUGIN[INPUT]}) JARNAME=${JAR%.jar} as_user "rm -f ${PLUGIN[INPUT]}" sleep 2 as_user "cd $PLUGINSPATH && rm -rf ./${JARNAME}" if [ -f "${PLUGINSPATH}/${JARNAME}" ] then echo "Plugin folder could not be removed..." fi echo "Plugin removed." else echo "${PLUGIN[INPUT]}" echo "Invalid plugin! Does not exist! Canceling..." exit; fi else echo "Canceling..." exit; fi else echo "You have no plugins installed." exit; fi } mc_backup() { mc_saveoff for i in "${WORLDS[@]}"; do NOW=`date "+%Y-%m-%d_%Hh%M"` BACKUP_FILE="$BACKUPPATH/${i}_${NOW}.tar" echo "Backing up world: $i..." #as_user "cd $MCPATH && cp -r $i $BACKUPPATH/${i}_`date "+%Y.%m.%d_%H.%M""` as_user "tar -C \"$MCPATH\" -cf \"$BACKUP_FILE\" $i" done echo "Backing up $SERVICE" as_user "tar -C \"$MCPATH\" -rf \"$BACKUP_FILE\" $SERVICE" #as_user "cp \"$MCPATH/$SERVICE\" \"$BACKUPPATH/craftbukkit_server_${NOW}.jar\"" mc_saveon echo "Compressing backup..." as_user "tar -cvzf $BACKUPPATH/server_backup_${NOW}.tar.gz $MCPATH" echo "Backup has completed successfully." } mc_command() { command="$1"; if pgrep -u $USERNAME -f $SERVICE > /dev/null then pre_log_len=`wc -l "$MCPATH/server.log" | awk '{print $1}'` echo "$SERVICE is running... executing command" as_user "screen -p 0 -S craftbukkit -X eval 'stuff \"$command\"\015'" sleep .1 # assumes that the command will run and print to the log file in less than .1 seconds # print output tail -n $[`wc -l "$MCPATH/server.log" | awk '{print $1}'`-$pre_log_len] "$MCPATH/server.log" fi } #Start-Stop here case "$1" in start) mc_start ;; stop) mc_stop ;; restart) mc_stop mc_start ;; save) mc_save ;; update) mc_stop mc_backup mc_update mc_start ;; scanplugins) mc_scanplugins ;; addplugin) mc_addplugin ;; backup) mc_backup ;; status) if pgrep -u $USERNAME -f $SERVICE > /dev/null then echo "$SERVICE is running." else echo "$SERVICE is not running." fi ;; command) if [ $# -gt 1 ]; then shift mc_command "$*" else echo "Must specify server command (try 'help'?)" fi ;; *) echo "Usage: $0 {start|stop|update|backup|status|restart|command \"server command\"}" exit 1 ;; esac exit 0

  Read the article

• The MAPI call 'OpenMsgStore' failed: The MAPI provider failed Exchange 2003

  - by realitnzsam

  Hi guys, Recently we moved our Exchange 2003 (SP2) database from one drive to another. Now every other day or so we get errors coming up in the event log: Event Type: Error Event Source: MSExchangeSA Event Category: MAPI Session Event ID: 9175 Date: 10/03/2010 Time: 8:06:15 a.m. User: N/A Computer: SERVER Description: The MAPI call 'OpenMsgStore' failed with the following error: The attempt to log on to the Microsoft Exchange Server computer has failed. The MAPI provider failed. Microsoft Exchange Server Information Store ID no: 8004011d-0512-00000000 For more information, click http://www.microsoft.com/contentredirect.asp. Restarting the Exchange Information Store fixes this instantly, but until we do it Outlook won't connect to Exchange and Blackberry emails aren't pushing out.

  Read the article

• Gnome trash on cifs mount random behaviour

  - by BobPenguin

  Hello everyone, I'm seeing some weird behaviour in Ubuntu 10.04. I have a cifs mount that's mounted by fstab as follows: //192.168.1.1/share /media/storage cifs_netdev,username=guest,password="",uid=1000,guid=100,file_mode=0777,dir_mode=0777 0 0 I can mount the share using: sudo mount -a my user can then access it, create and delete files. The deleted files appear in the gnome trash applet. A folder /media/storage/.Trash-1000 is created automatically. When I log out, restart the machine and log in, the cifs share is mounted but the trash applet is empty. If I unmount the share with sudo umount /media/share then remount with sudo mount -a the trash applet displays the contents of the .trash-1000 folder! It gets stranger...sometimes after umount then mount -a the trash is STILL empty, but another round of umount then mount -a fixes it. It seems like the trash applet is "forgetting" to scan the /media/storage mount point and is not always finding the .trash-1000 folder at that mount point. Even when the trash applet is not displaying any trash from /media/storage/.trash-1000 I can still delete things from the /media/storage and they're moved to the .trash-1000 folder. So I conclude there's a bug in the trash applet...anyone know how to fix it?

  Read the article

• Useless Plesk Error?

  - by Josh Pennington

  I am trying to determine why Plesk on my server won't start and I have no idea where to even start (since my hosting company appears to not want to help me out). Anyways, the error in my Plesk error_log is as follows: 2010-12-25 21:30:28: (log.c.75) server started 2010-12-25 21:30:28: (network.c.336) SSL: error:00000000:lib(0):func(0):reason(0) 2010-12-25 21:30:28: (log.c.75) server started 2010-12-25 21:30:28: (network.c.336) SSL: error:00000000:lib(0):func(0):reason(0) It leads me to believe its a problem with the SSL on the server but I am not sure what to make of the error. Can someone lead me in the right direction? Thanks Josh Pennington

  Read the article

• How do I fix my installation of ATI Catalyst Video Drivers in 12.04 LTS?

  - by Boris

  My graphic card is a Mobility Radeon HD 4200 Series. I tried these 2 answers from What is the correct way to install ATI Catalyst Video Drivers in 12.04 LTS? But unfortunately, it does not work for me: When running the amd script, I get this error message: $ sudo sh ./amd-driver-installer-12-4-x86.x86_64.run ... DKMS part of installation failed. Please refer to /usr/share/ati/fglrx-install.log for details When checking this log file, I get: Uninstalling any previously installed drivers. Creating symlink /var/lib/dkms/fglrx/8.961/source -> /usr/src/fglrx-8.961 DKMS: add completed. Kernel preparation unnecessary for this kernel. Skipping... Building module: cleaning build area.... cd /var/lib/dkms/fglrx/8.961/build; sh make.sh --nohints --uname_r=3.2.0-24-generic-pae --norootcheck......(bad exit status: 1) [Error] Kernel Module : Failed to build fglrx-8.961 with DKMS [Error] Kernel Module : Removing fglrx-8.961 from DKMS Deleting module version: 8.961 completely from the DKMS tree. Done. [Reboot] Kernel Module : update-initramfs When checking with fglrxinfo, I get: $ fglrxinfo X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 138 (ATIFGLEXTENSION) Minor opcode of failed request: 66 () Serial number of failed request: 13 Current serial number in output stream: 13

  Read the article

• Bootstrapping in CloudFormation with Autoscale

  - by PapelPincel

  My CloudFormation template creates an autoscale group and bootstrap it with utility script /opt/aws/bin/cfn-init. When I remove the bootstrap part out of my template the, autoscale get created without any problem, but I add it the CloudFormation Stack fails and add line in /var/log/cloud-init.log : Error: AutoScalingGroupName does not specify any metadata The line above appens right after the following command : /opt/aws/bin/cfn-init --verbose --configsets orderedConfig --region us-east-1 --stack AS15 --resource AutoScalingGroupName --access-key XXXXXXXXXXXXX --secret-key XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Digging a little bit deeper, in cfn-init I added the following lines the point where it exit: from pprint import pprint pprint(vars(detail)) and I get the following trace when running the previous cfn-init command : {'_description': None, '_lastUpdated': datetime.datetime(2012, 7, 12, 14, 52, 42), '_logicalResourceId': u'AutoScalingGroupName', '_metadata': None, '_physicalResourceId': u'AS15-AutoScalingGroupName-HNPOXXXXXXXX', '_resourceStatus': u'CREATE_COMPLETE', '_resourceStatusReason': None, '_resourceType': u'AWS::AutoScaling::AutoScalingGroup', '_stackId': u'arn:aws:cloudformation:us-east-1:XXXXXXXXXXXXX:stack/AS15/XXXXXXXX-cc30-11e1-XXXXXX-XXXXXXXXXX', '_stackName': u'AS15'} As you can see, the metadata field is empty and that's the reason why it fails to create the stack. Is there any known side effects for cfn-init when used with autoscale ?

  Read the article

• Why might apache2 use 100% of CPU at startup?

  - by QuantumMechanic

  This is apache 2.2.14 on SLES9. Out of nowhere (i.e. it had been working fine for ages) I am seeing apache2 suddenly start using 100% of the CPU at startup, and never completing startup. Nothing is getting written to /var/log/error_log (when it did back when things were OK). ps only shows the main httpd process and not any of the spawned threads. When things were OK, it would show the spawned threads. So it appears httpd is going into some sort of infinite loop right at startup and isn't even completing startup. It's not an issue of being overloaded by connections -- this happens even when nothing is trying to contact it. The config files haven't changed (or at least they haven't changed in a way that changed their last-modified time). I've tried added -e debug -E /var/log/apache2/startup_info to the command line, but nothing is put in the file. Any ideas what could be happening?

  Read the article

< Previous Page | 203 204 205 206 207 208 209 210 211 212 213 214  | Next Page >