Search Results

Search found 8646 results on 346 pages for 'echo flow'.

Page 208/346 | < Previous Page | 204 205 206 207 208 209 210 211 212 213 214 215  | Next Page >

  • Replace an IP address with it's whois using bash

    - by user2099762
    I have a traffic log similar to this "page visited" for xxx.xxx.xxx.xxx at 2013-10-30 and I would like to replace the ip address with the result of it's whois lookup. I can export the ip addresses to a separate file and then do a whois on each line, but im struggling to combine them all together. Ideally i'd like to replace the ip address in the same string and print the new string to a new file. So it would look like "page visited" for example.com at 2013-10-30 Can anyone help Here's what I have so far grep -o '[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}' clean_cites.txt > iplist.txt for i in `cat iplist.txt` do OUTPUT=$(geoiplookup -f /usr/share/GeoIP/GeoIPOrg.dat $i) echo $i,$OUTPUT >> visited.txt done Like I said,this produces a separate file with a list of ip addresses and their relevant hostnames, so I either need to search for the ip address in file and and replace it with the text in file b (which will give the ip address and hostname) or replace the ip address in place. Thanks

    Read the article

  • Piping stream into tar on FreeBSD

    - by Casey Jordan
    I am trying to pipe a tar/gzip archive into tar to decompress it. The script I have is part of a self extracting installer, where my archive is appended to the script. This works fine on linux, and the script looks like this: export TMPDIR=`mktemp -d /tmp/selfextract.XXXXXX` echo "TEMP: $TMPDIR" ARCHIVE=`awk '/^__ARCHIVE_BELOW__/ {print NR + 1; exit 0; }' $0` tail -n+$ARCHIVE $0 | tar xz -C $TMPDIR exit 0 __ARCHIVE_BELOW__ The tar archive as a string is after the ARCHIVE_BELOW but I omitted it from here since it's huge. However, when I do this on FreeBSD I get the following error: tar: Failed to open '/dev/sa0' I read that this is because free BSD expects to read from that device by default and you can tell it to read from stdin by passing -f - like so: tail -n+$ARCHIVE $0 | tar zxf - -C $TMPDIR However, when I do this I just get the error: tar: Damaged tar archive tar: Retrying... Can anyone point out what I am doing wrong here? I need to do it this way (Via piping) for efficiency reasons. Thanks

    Read the article

  • Weird bug in 'tar' not including files named .__init__.py

    - by Sridhar Ratnakumar
    Does anyone know why tar is not including files named .__init__.py (note the dot)? $ mkdir /tmp/work && cd /tmp/work $ mkdir foo $ touch foo/.__init__.py $ touch foo/.namespace__init__.py $ tar czf foo.tar.gz foo $ mkdir e && mv foo.tar.gz e/ && cd e/ $ tar zxf foo.tar.gz $ ls -al foo/ total 0 drwxr-xr-x 2 sridharr wheel 102 14 Mar 17:16 . drwxr-xr-x 3 sridharr wheel 136 14 Mar 17:17 .. -rw-r--r-- 1 sridharr wheel 0 14 Mar 17:16 .namespace__init__.py $ $ echo ".__init__.py file is missing. WTF? This is OSX 10.6"

    Read the article

  • Simple XML variable returns "0"

    - by Warren Haskins
    Ok, so im working with tumblr's API and im using SimpleXMLElement with php and ive run into a problem. Basically, when I call on a variable it just prints a zero. for instance : <?php echo $data->posts->post[0]->photo-url[5]; ?> This just breaks the page, and when I leave out the [5] it just prints zero I want to echo the photo-url with the number [5] but I cant get my head around this and its killing me. I just dont understand why it wont work. Heres a sample of the simpleXMLElement print-out : SimpleXMLElement Object ( [@attributes] = Array ( [version] = 1.0 ) [posts] => SimpleXMLElement Object ( [@attributes] => Array ( [type] => photo ) [post] => Array ( [0] => SimpleXMLElement Object ( [@attributes] => Array ( [id] => 574166180 [url] => http://young-n-reckless.tumblr.com/post/574166180 [url-with-slug] => http://young-n-reckless.tumblr.com/post/574166180 [type] => photo [date-gmt] => 2010-05-05 19:52:46 GMT [date] => Wed, 05 May 2010 15:52:46 [unix-timestamp] => 1273089166 [format] => html [reblog-key] => vc9EfT7d [slug] => [tumblelog] => young-n-reckless [bookmarklet] => true ) [tumblelog] => SimpleXMLElement Object ( [@attributes] => Array ( [title] => Young & Reckless [name] => young-n-reckless [url] => http://young-n-reckless.tumblr.com/ [timezone] => US/Eastern [avatar-url-16] => http://24.media.tumblr.com/avatar_424f776dd55c_16.png [avatar-url-24] => http://24.media.tumblr.com/avatar_424f776dd55c_24.png [avatar-url-30] => http://24.media.tumblr.com/avatar_424f776dd55c_30.png [avatar-url-40] => http://25.media.tumblr.com/avatar_424f776dd55c_40.png [avatar-url-48] => http://24.media.tumblr.com/avatar_424f776dd55c_48.png [avatar-url-64] => http://26.media.tumblr.com/avatar_424f776dd55c_64.png [avatar-url-96] => http://25.media.tumblr.com/avatar_424f776dd55c_96.png [avatar-url-128] => http://24.media.tumblr.com/avatar_424f776dd55c_128.png [avatar-url-512] => http://29.media.tumblr.com/avatar_424f776dd55c_512.png ) ) [photo-link-url] => http://www.flickr.com/photos/katiemabey/3429588812/ [photo-url] => Array ( [0] => http://30.media.tumblr.com/tumblr_l1w1qd7Zcg1qatgoto1_500.jpg [1] => http://30.media.tumblr.com/tumblr_l1w1qd7Zcg1qatgoto1_500.jpg [2] => http://25.media.tumblr.com/tumblr_l1w1qd7Zcg1qatgoto1_400.jpg [3] => http://28.media.tumblr.com/tumblr_l1w1qd7Zcg1qatgoto1_250.jpg [4] => http://30.media.tumblr.com/tumblr_l1w1qd7Zcg1qatgoto1_100.jpg [5] => http://30.media.tumblr.com/tumblr_l1w1qd7Zcg1qatgoto1_75sq.jpg ) ) Any help would be greatly appreciated, and thanks in advance. Warren

    Read the article

  • Best code structure for arcade games

    - by user280454
    Hi, I've developed a few arcade games so far and have the following structure in almost all of them: I have 1 file which contains a class called kernel with the following functions: init() welcome_screen() menu_screen() help_Screen() play_game() end_screen() And another file, called Game, which basically calls all these functions and controls the flow of the game. Also, I have classes for different characters, whenever required. Is this a good code structure, or should I try having different files(classes) for different functions like welcome screen, playing, help screen, etc? As in, instead of including all the code for these things in 1 file, should I be having different classes for each one of them? The only problem I think it might cause is that I would need certain variables like score, characters, etc which are common to all of them, that's why I have all these functions in a Kernel class so that all these functions can use these variables.

    Read the article

  • Sending mail via php in EC2

    - by william007
    I have used the following code for sending mail using php using amazon ec2, but I only see 'aatest' as the result, and doesn't get any incoming email. Btw, I have already included ses.php, and have validated the email [email protected], and double confirm that accesskey, and accesskey are the correct one. Can anyone suggest way for debugging it? require_once('ses.php'); $con=new SimpleEmailService('accesskey','accesskey'); print_r('aa'.$con->listVerifiedEmailAddresses()); $m = new SimpleEmailServiceMessage(); $m->addTo('[email protected]'); $m->setFrom('[email protected]'); $m->setSubject('Hello, world!'); $m->setMessageFromString('This is the message body.'); print_r($con->sendEmail($m)); echo 'test';

    Read the article

  • Using pg_connect() with wamp server and postgresql

    - by northlandiguana
    Help! I am trying to connect to a Postgres database and can't get the server to connect. When I execute this php script: $conn = pg_connect("dbname=wikimap user=postgres password=postgis host=localhost port=54321"; if (!$conn) { echo "Not connected : " . pg_error(); exit; } I get this error: <b>Fatal error</b>: Call to undefined function pg_connect() in <b>C:\wamp\www\wikimap\php\pgis.php</b> on line <b>33</b><br /> I have made sure the php_pgsql and php_pdo_pgsql extensions are enabled in the wamp menu and php.ini, and I've read through other topics in this forum and others about connecting wamp to postgres, messing with the httpd.config file and php.ini file and copying libpq.dll between bins, all to no avail. I've been working on this for hours and can't figure out how to get pg_connect to work. Any ideas???

    Read the article

  • How to use HTML markup tags inside Bash script

    - by CONtext
    I have crontab and a simple bash script that sends me emails every often containing PHP, NGINX, MYSQL errors from their log files. This is a simplified example. #/home/user/status.sh [email protected] PHP_ERROR=`tail -5 /var/log/php-fpm/error.log` NGINX_ERROR=`tail -5 /var/log/nginx/error.log` MYSQL_ERROR=`tail /var/log/mysqld.log` DISK_SPACE=`df -h` echo " Today's, server report:: ================================== DISK_SPACE: $DISK_SPACE --------------------------------- MEMORY_USAGE: $MEMORY_USAGE ----------------------------------- NGINX ERROR: $NGINX_ERROR ----------------------------------- PHP ERRORS: $PHP_ERROR ------------------------------------ MYSQL_ERRORS: $MYSQL_ERROR ------------------------------------- " | mail -s "Server reports" $EMAIL I know this is a very basic usage, but as you can see, I am trying to separate the errors, but not of the html tags including \n are working. So, my question is, is it possible to use HTML tags to format the text, if not .. then what are the alternatives.

    Read the article

  • c# ASP HttpResponse with redirect causes HTTP 302

    - by acnse
    Hi, I have a flow of web pages A and B. On the web page A, I do a "Response.Redirect("B.aspx"); The page B needs a client certificate. When the redirect is done I see a popup asking for a client certificate. I select the correct certificate, which is retrieved from a smart card, and then I insert the pin. Right after, I see a page saying that the connection was lost, and I receive an HTTP 302. I never reach the page B.aspx. I tried to add the following line "Response.RedirectLocation = "B.aspx"; but with no success too. Any hints? Thanks

    Read the article

  • TFS Integration with Rational ClearQuest and Requirement Manager

    - by Kangkan
    I am working on an integration approach for integrating Rationa (IBM Jazz) Requirement Manager (RM) and Clear Quest (CQ) with TFS. As the teams are moving from ClearCase to TFS, what we are looking at is still being able to manage the requirements in RM and manage testing using CQ. The flow will be something like: Requirements are planned and detailed in RM Create work items in TFS connected to the Requirements in RM Create design and code using VS2010 and managing the version control in TFS Creating test plans and test cases in CQ (connected to requirements in RM) Run test against builds in TFS Publish test results in CQ against builds in TFS Run reports in RM, CQ and TFS that links up the items across the platforms. I have started looking at TFS Integration platform. But shall like to have your guidance for an early resolution and better solution approach.

    Read the article

  • Calling SSIS from BizTalk Orchestration

    - by aceinthehole
    I have a scenario were I need to move a vast amount of data, and I need to use BizTalk to control the flow and contain the business logic. The problem is that BizTalk will not be able to handle the amount of data that needs to be moved. We have decided to a BizTalk Orchestration to kick off an SSIS package that does the actual heavy lifting. However, there is a caveat in that we have to be able to pass information into SSIS such as file location and info about how to split certain data up. My question is, what is the best way to call into SSIS from an Orchestration given those parameters? Should I build a webservice around it? Is there an adapter or stored procedure that I can call? Or is there a way to call it directly from the Orchestration?

    Read the article

  • Fix a tomcat6 error message "/bin/bash already running" when starting tomcat?

    - by Andrew Austin
    I have a Ubuntu 10.04 machine that has tomcat6 on it. When I start tomcat6 with /etc/init.d/tomcat6 start I get * Starting Tomcat servlet engine tomcat6 /bin/bash already running. and the server fails to start. Unfortunately, there is nothing in /var/log/tomcat/catalina.out to help debug the issue. With some cleverly placed echo statements it seems to be the line from /etc/init.d/tomcat6: start-stop-daemon --start -u "$TOMCAT6_USER" -g "$TOMCAT6_GROUP" \ -c "$TOMCAT6_USER" -d "$CATALINA_TMPDIR" \ -x /bin/bash -- -c "$AUTHBIND_COMMAND $TOMCAT_SH" The only thing I've changed in this script is TOMCAT6_USER=root. In servers.xml, the only thing I've changed is <Connector port="80" protocol="HTTP/1.1" from port 8080. I have tried reinstalling the package by first removing everything sudo apt-get --purge remove tomacat6 and then sudo apt-get install tomcat6 but this has not solved the issue. I have also restarted the server multiple times in hopes of some magic. Everything was working until I restarted my server. Any ideas?

    Read the article

  • Fix a tomcat6 error message "/bin/bash already running" when starting tomcat?

    - by Andrew Austin
    I have a Ubuntu 10.04 machine that has tomcat6 on it. When I start tomcat6 with /etc/init.d/tomcat6 start I get * Starting Tomcat servlet engine tomcat6 /bin/bash already running. and the server fails to start. Unfortunately, there is nothing in /var/log/tomcat/catalina.out to help debug the issue. With some cleverly placed echo statements it seems to be the line from /etc/init.d/tomcat6: start-stop-daemon --start -u "$TOMCAT6_USER" -g "$TOMCAT6_GROUP" \ -c "$TOMCAT6_USER" -d "$CATALINA_TMPDIR" \ -x /bin/bash -- -c "$AUTHBIND_COMMAND $TOMCAT_SH" The only thing I've changed in this script is TOMCAT6_USER=root. In servers.xml, the only thing I've changed is <Connector port="80" protocol="HTTP/1.1" from port 8080. I have tried reinstalling the package by first removing everything sudo apt-get --purge remove tomacat6 and then sudo apt-get install tomcat6 but this has not solved the issue. I have also restarted the server multiple times in hopes of some magic. Everything was working until I restarted my server. Any ideas?

    Read the article

  • Implementing dry-run in bash scripts

    - by Andrei Serdeliuc
    How would one implement a dry-run option in a bash script? I can think of either wrapping every single command in an if and echoing out the command instead of running it if the script is running with dry-run. Another way would be to define a function and then passing each command call through that function. Something like: function _run () { if [[ "$DRY_RUN" ]]; then echo $@ else $@ fi } `_run mv /tmp/file /tmp/file2` `DRY_RUN=true _run mv /tmp/file /tmp/file2` Is this just wrong and there is a much better way of doing it?

    Read the article

  • MonoDevelop/GTK OS X Usability Issues?

    - by Tylo
    Does anyone else have infuriating usability issues while trying to work with MonoDevelop in OS X Snow Leopard? The ones that interrupt my flow the most are associated with button clicks not responding until I move the window around a little bit. Afterwards, I can get maybe one or two button presses in before I have to repeat moving the window around. I've heard this is a GTK problem that has nothing to do with MonoDevelop in the past and would like to know if anyone else experiences this or has found a way to fix it?

    Read the article

  • Run a batch file silently, executed at remote desktop login

    - by ILMV
    In our office we are using Linux thin client machines, they work very well except the lack of IE, which is a pain because the corporations we deal with are too stupid to update their web apps (no flame wars please). To solve this problem we have machine in our computer room which users remote desktop into to access internet explorer, this is achieved by running a batch script which opens IE and when it closes logs them off, this setup works well for us. Even though I have @echo off and the cmd window isn't displaying anything, I would really like that batch file to be executed silently, so the cmd window doesn't appear at all. Is this possible? The Ubuntu terminal server client has an option to launch a file / app at login, is there a command I can use to run this batch silently. I have tried these: C:\my_batch.bat /NOCONSOLE C:\my_batch.bat /NOWINDOW C:\my_batch.bat /B C:\my_batch.bat /Q ...with no success, perhaps it's the way I am doing it? Cheers :-) Edit The remote desktop platform is a Windows XP machine, nothing entirely special but not a Windows Server setup.

    Read the article

  • Text orientation

    - by Psytronic
    Hi Guys I know you can do this to get vertical text in a tab header: <Window x:Class="Abodemploy.Window1" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="Window1" Height="300" Width="300" <Grid <TabControl Margin="0" Name="tabControl1" FlowDirection="LeftToRight" TabStripPlacement="Left" <TabItem <TabItem.Header <StackPanel Orientation="Horizontal" <TextBlockHomes</TextBlock </StackPanel </TabItem.Header <TabItem.LayoutTransform <TransformGroup <RotateTransform Angle="90" / </TransformGroup </TabItem.LayoutTransform <Grid / </TabItem </TabControl </Grid </Window However the text letters are sideways. What I'd like (if possible) is for the letter orientation to be correct (ie upwards), but the text flow downwards, is this possible, or am I just dreaming the impossible dream? Thanks Psy

    Read the article

  • VIM zsh, bash and colors in command line on Ubuntu

    - by Jacek Wysocki
    I have problem with VIM command line when calling system commands. e.g. !ls, all command output colors aren't parsed by VIM. My system is Ubuntu 12.04 LTS with VIM 7.3.429 from Ubuntu repositories. Is there any workaround for this problem? EDIT: My vimrc file :!echo $TERM in VIM returns : dumb EDIT2: I found a simple workaround but it's not perfect if [ "$VIM" ] && [ "$TERM" = "dumb" ] then # For gvim's monochromatic :shell PS1='\n\u@\h \w\n\$ ' unalias ls unalias grep fi (It's working on bash)

    Read the article

  • There are another way to load MSHTML documents without use Application.ProcessMessages?

    - by douglaslise
    There are another way to load MSHTML documents without use Application.ProcessMessages? To load a document into a IHTMLDocument I need to do this: while Doc.readyState <> 'complete' do Application.ProcessMessages; I want not to process all the message queue during the loading, because I would be changing my application flow, in other words, some messages that should be processed after the loading to be completed can be processed earlier, even before the loading end. There is a special message code that the IHTMLDocument expect to advance in the loading process? Or there is another way to load? Thanks.

    Read the article

  • php cookie not working

    - by Jacksta
    I am trying to use a cookie with authentication. This page works once entering user and pass <? if ((!$_POST[username]) || (!$_POST[password])) { header("Location: show_login.html"); exit; } $db_name = "testDB"; $table_name = "auth_users"; $connection = @mysql_connect("localhost", "user", "pass") or die(mysql_error()); $db = @mysql_select_db($db_name, $connection) or die(mysql_error()); $sql = "SELECT * FROM $table_name WHERE username ='$_POST[username]' AND password = password('$_POST[password]')"; $result = @mysql_query($sql, $connection) or die(mysql_error()); $num = mysql_num_rows($result); if ($num != 0) { $cookie_name = "auth"; $cookie_value = "ok"; $cookie_expire = "0"; $cookie_domain = "domain.com.au"; setcookie($cookie_name, $cookis_value, $cookie_expire, "/", $cookie_domain, 0); $display_block = " <p><strong>Secret Menu:</strong></p> <ul> <li><a href=\"secretA.php\">secret page A</a> <li><a href=\"secretB.php\">secret page B</a> </ul>"; } else { header("Location: show_login.html"); exit; } ?> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <title>Secret Area</title> </head> <body> <? echo "$display_block"; ?> </body> </html> WHen clicking on either secretA.php or secretB.php I am redirected to log in again, it should work. here is the code. secretB.php <?php if ($_COOKIE[auth] == "ok") { $msg = "<p>Welcome to secret page B, authorised user! </P>"; } else { header( "Location: /show_login.html"); exit; } ?> <HTML> <HEAD> <title>Secret Page B:</title> </HEAD> <BODY> <? echo "$msg"; ?> </BODY> </HTML>

    Read the article

  • Event bubbling with img tags?

    - by Kenny Bones
    I did some googling and figured I'm probably experiencing so called "event bubbling" that I've never heard of but are not surprised by it's existance. I want it to fire only once and I'm wondering how to fix this. Basically, I have this small code snippet: $('.bggallery_images').click(function () { alert('test'); }); This is supposed to fire once from a php snippet that basically adds an image of each image from a specific folder. It then outputs an echo string where each image has the class of "bggallery_images". PHP snippet looks like this: <?php $dirname = "img"; $images = scandir($dirname); $ignore = Array(".", ".."); foreach($images as $file) { if(!in_array($file, $ignore)) { echo "<img class=\"bggallery_images\" src=\"$dirname/$file\" />"; }; } ?> This all generates the html markup that looks like this for each image: <img src="img/WhitePattern6.gif" class="bggallery_images"> What is happening here? Here's the rendered output from FireBug: <div id="gallery_lightbox" style="height: 215px; z-index: 4; display: block;"> <div id="close"></div> <h2><cufon class="cufon cufon-canvas" alt="Velg " style="width: 39px; height: 20px;"><canvas width="49" height="23" style="width: 49px; height: 23px; top: -4px; left: 0px;"></canvas><cufontext>Velg </cufontext></cufon><cufon class="cufon cufon-canvas" alt="bakgrunnsbilde" style="width: 123px; height: 20px;"><canvas width="129" height="23" style="width: 129px; height: 23px; top: -4px; left: 0px;"></canvas><cufontext>bakgrunnsbilde</cufontext></cufon></h2> <div class="bggallery_images">testererererer</div> <img src="img/Bakgrunner/4462-v4.jpg" class="bggallery_images"><img src="img/Bakgrunner/5922.gif" class="bggallery_images"><img src="img/Bakgrunner/BluePattern.gif" class="bggallery_images"><img src="img/Bakgrunner/Brown1.gif" class="bggallery_images"><img src="img/Bakgrunner/Brown2Pattern.jpg" class="bggallery_images"><img src="img/Bakgrunner/BrownPattern.jpg" class="bggallery_images"><img src="img/Bakgrunner/Brownn.gif" class="bggallery_images"><img src="img/Bakgrunner/GrayPattern.gif" class="bggallery_images"><img src="img/Bakgrunner/GreenPattern3.gif" class="bggallery_images"><img src="img/Bakgrunner/OrangePattern.gif" class="bggallery_images"><img src="img/Bakgrunner/PurplePattern.gif" class="bggallery_images"><img src="img/Bakgrunner/PurplePattern2.gif" class="bggallery_images"><img src="img/Bakgrunner/RedPattern3.gif" class="bggallery_images"><img src="img/Bakgrunner/RedPattern4.gif" class="bggallery_images"><img src="img/Bakgrunner/RedPattern5.gif" class="bggallery_images"><img src="img/Bakgrunner/Tiled_Wallpaper__Green_Texture_by_knitetgantt.png" class="bggallery_images"><img src="img/Bakgrunner/WhitePattern4.gif" class="bggallery_images"><img src="img/Bakgrunner/WhitePattern5.gif" class="bggallery_images"><img src="img/Bakgrunner/WhitePattern6.gif" class="bggallery_images"><img src="img/Bakgrunner/WhitePattern7.gif" class="bggallery_images"><img src="img/Bakgrunner/WhitePurple.jpg" class="bggallery_images"><img src="img/Bakgrunner/YellowPattern.gif" class="bggallery_images"><img src="img/Bakgrunner/vintage-wallpaper.jpg" class="bggallery_images"> </div>

    Read the article

  • can you help me with 8068 project for Delphi .net please

    - by Lex Dean
    To find an Assembly programmer is very hard to help me I'm a established Delphi programmer that has an old copy of Delphi that is not .net And I have a *.dll that I'm converting into Delphi code for .net I'm on a big learning curve hear as i know little of .net yet. I've just got a computer with .net today!!!!!! I've run the *.dll through a dissembler and started putting jump links in as writing in Delphi assembly you do not do any addressing, just reference links. The file has fixed string structures (i think C++) ASCII & ANSI strings 1/ I do not know how to identify how the code references these structures 2/ and I do not know were the functions begin and what shape they look like The code is free for any one to look at their is not many functions in it. but I have to email it as stack over flow will not allow me to display it. Can you tech me or can you refer me to a friend you may know please to tech me lexdeanair at hotmail.com Best regards, Lex Dean from New Zealand I do not wish to pester any one

    Read the article

  • Fastest sort of fixed length 6 int array

    - by kriss
    Answering to another StackOverflow question (this one) I stumbled upon an interresting sub-problem. What is the fastest way to sort an array of 6 ints ? As the question is very low level (will be executed by a GPU): we can't assume libraries are available (and the call itself has it's cost), only plain C to avoid emptying instruction pipeline (that has a very high cost) we should probably minimize branches, jumps, and every other kind of control flow breaking (like those hidden behind sequence points in && or ||). room is constrained and minimizing registers and memory use is an issue, ideally in place sort is probably best. Really this question is a kind of Golf where the goal is not to minimize source length but execution speed. I call it 'Zening` code as used in the title of the book Zen of Code optimization by Michael Abrash and it's sequels.

    Read the article

  • How to execute a shell script on startup?

    - by vijay.shad
    I have create a script to start a server(my first question). Now I want it to run on the system boot and start the defined server. What should I do to get this done? My findings tell me put this file in /etc/init.d location and it will execute when the system will boot. But I am not able to understand how the first argument on the startup will be start? Is this predefined somewhere to use start as $1? If I want to have a case startall that will start all the servers in the script, then what are the options I can manage. My Script is like this: #!/bin/bash case "$1" in start) start ;; stop) stop ;; restart) $0 stop $0 start ;; *) echo "usage: $0 (start|stop|restart)" ;; esac

    Read the article

  • What happens after a packet is captured?

    - by Rayne
    Hi all, I've been reading about what happens after packets are captured by NICs, and the more I read, the more I'm confused. Firstly, I've read that traditionally, after a packet is captured by the NIC, it gets copied to a block of memory in the kernel space, then to the user space for whatever application that then works on the packet data. Then I read about DMA, where the NIC directly copies the packet into memory, bypassing the CPU. So is the NIC - kernel memory - User space memory flow still valid? Also, do most NIC (e.g. Myricom) use DMA to improve packet capture rates? Secondly, does RSS (Receive Side Scaling) work similarly in both Windows and Linux systems? I can only find detailed explanations on how RSS works in MSDN articles, where they talk about how RSS (and MSI-X) works on Windows Server 2008. But the same concept of RSS and MSI-X should still apply for linux systems, right? Thank you. Regards, Rayne

    Read the article

< Previous Page | 204 205 206 207 208 209 210 211 212 213 214 215  | Next Page >