Search Results

Search found 7756 results on 311 pages for 'hardware acceleration'.

Page 208/311 | < Previous Page | 204 205 206 207 208 209 210 211 212 213 214 215  | Next Page >

• Can I get redundancy with a JBOD storage subsystem

  - by Dat Chu

  I have a Promise Technology J610S. This is a JBOD subsystem. Is it possible for me to buy a SAS hardware RAID controller and provide some type of redundancy for these drives? I am unsure whether I will use Linux or Windows yet so an answer with enumeration for both would be highly appreciated. One solution that I thought of was: if my J610s can export each drive as a target, my server will simply see 16 drives. The RAID controller can then perform the RAID5/RAID6 if I want.

  Read the article

• Need help upgrading MacBookPro3,1 RAM to 4GB.

  - by Fantomas

  My questions are: 1) Where to buy it and what to buy? I have heard that this RAM is generic enough and it does not have to come from Apple. 2) Can I reuse my existing stick(s)? Would I have a single 2GB module, or 2 x 1GB modules? 3) If I have 2GB already, is it a good idea to have one old stick and one new one? Which one is better placed at the top and which one at the bottom? Let me know what questions you have. My computer's info: Hardware Overview: Model Name: MacBook Pro Model Identifier: MacBookPro3,1 Processor Name: Intel Core 2 Duo Processor Speed: 2.4 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache: 4 MB Memory: 2 GB Bus Speed: 800 MHz Boot ROM Version: MBP31.0070.B07 SMC Version (system): 1.16f11

  Read the article

• Windows 8 will only recognize the Blu-Ray drive, if the Windows 8 disc is present at boot time

  - by aceinthehole

  If I have the install disc in the Blu-Ray ROM drive at boot time and subsequently remove the disc and replace it with Blu-Ray media, everything functions as I’d expect. However, if I have no media present, or another disc in the drive at boot time, then Windows 8 does not seem to recognize that the Blu-Ray player is even present in the computer. It is not present in My Computer, the Device Manager does not show the player, and scanning for new hardware yields nothing. It seems that the driver is installed and working as expected, but what is it about having the Windows 8 install disc in the drive or not that would cause this kind of behavior?

  Read the article

• X200 Tablet notebook won't start after BIOS Update

  - by THEn

  I have LENOVO X200 Tablet and I ran the BIOS Update and the computer won't start after the BIOS update. When I ran the BIOS update utility it ran everything fine and asked to restart the computer but it wont start screen is blank. I unplugged the power and took of the battery and put them back and still not starting. Now it has [Power On] indicator light on and screen is not starting. I tried pressing F1 button while trying to start the computer but it doesn't do react to anything. Please help how I can start my Tablet. The update utility is http://support.lenovo.com/en_US/downloads/detail.page?LegacyDocID=MIGR-70651 Does any body know if X200 have any kind of hardware switch to reset the BIOS or any thing? What would be the best way to fix my BIOS? Thank you.

  Read the article

• Is it possible to have a portable plotter that can print QR codes on burlap?

  - by Brian Ballsun-Stanton

  This is a hardware question. Is there a class of plotters that are portable and accept sharpies? The use case: I have a burlap sack. It will be taking very specific potsherds from an archaeological dig. It needs an indelible QR code (or bar code) printed on the burlap. (Stickers have far far too short a lifetime). It was my thought that a plotter that uses sharpies and that works in the field would be the optimal solution for this problem. Is a portable plotter the right solution? If so, who makes them? If not, what is a better solution?

  Read the article

• Taking over and Moving a PHP site

  - by KCavon

  I have a internal use PHP site at my new position. It only runs a few days a year off site so we keep it on laptops. The hardware it has been on, a 8 year IBM Thinkpad running Fedora, is dying. I have new Lenovo Thinkpad's running latest and greatest Ubuntu. I have copied the contents of var to a shared drive, renamed the old www folder in var on the new machine and copied over the old www folder. I can get to the login page and into the site, but when I look something up it returns Cannot Open. I know I cannot get to the MySQL in the new machine because users and passwords dont match. The version of the PHP from the old machine is before the setup script was included. I know very little about PHP. I am looking for input on the proper way to link the old PHP files to my mysql instance. Any help, much appreciated.

  Read the article

• Client side certificates in client browsers with unix server for management

  - by user146253

  We are currently running Unix dedicated servers for everything (Web cluster, database, FTP, batch, ...) except for a Microsoft Active Directory Certificate Services. The sole purpose of this Windows box is to provide client side certificates to our clients browsers. All our clients are required to install a client side certificate on order for them to be able to access our website. Is there an alternative in the Unix space? The purpose is to make sure only the approved hardware of an approved client can access our website. I'm open for any solution that provides me with this level of security. We are however talking about thousands of certified computers just so you can factor that in in a proposed solution. Optionally we would also like to be able to revoke access. With Regards.

  Read the article

• How to troubleshoot memory card read?

  - by shinjin

  The built in memory card reader in my laptop mounts SD cards as read-only only. This happens both in Windows 7 and Ubuntu. Most of the time. Ever now an then it works. After a some non-deterministic combination of uninstalling/reinstalling/disabling/enabling of the driver with the mandatory reboots the card reader works for a while. Is there any sane way to troubleshoot if it's an actual hardware problem, or just a matter of drivers? I've tested it with several SD cards, that work just fine in other devices. System: Acer Aspire 8951G, Windows 7-64bit

  Read the article

• Cannot connect to IIS 7 from localhost

  - by Wout

  I cannot connect to the local IIS 7 using "http://localhost" in IE. "http://127.0.0.1" doesn't work either. The strange thing is that if I add a binding on e.g. port 81, then I can reach "http://localhost:81". Also turning off the firewall on the local machine doesn't help. The site is reachable from the internet. The local requests don't seem to hit IIS (no entries in the IIS log files). IIS is hosted on Windows Server 2008 R2 from behind a hardware firewall device. Note that I'm a programmer, not a network administrator, so I'm having a hard time trouble shooting this.

  Read the article

• Slow write speeds on new Gigabit home file server

  - by Ryan Holder

  So I finally got all my parts delivered to setup a home file/backup server this week. It's currently running Ubuntu Server and I'm using Samba to share files on my network. The server currently has a 2TB WD Green drive in it connected to a Asus M5A78L-M This is then connected via CAT6a to my new Gigabit switch (TP-Link TL-SG1005D). My home desktop is then also connected to this switch and again also through CAT6a cable. Currently when transfering files I will get a perfect 100MB/s read from the server to my Windows machine. When copying from my Windows machine to the server I get around 30/38MB/s. I know this drive is capable is faster speeds so would anybody have an idea of where the bottleneck is? Any help would be greatly appreciated :) EDIT: I have found ftp's write speed is much closer to what my Samba read speed is so I'm going to give it a guess that is a software problem rather than hardware

  Read the article

• Windows DFS Limitations

  - by Phil

  So far I have seen an article on performance and scalability mainly focusing on how long it takes to add new links. But is there any information about limitations regarding number of files, number of folders, total size, etc? Right now I have a single file server with millions of JPGs (approx 45 TB worth) that are shared on the network through several standard file shares. I plan to create a DFS namespace and replicate all these images to another server for high availability purposes. Will I encounter extra problems with DFS that I'm otherwise not experiencing with plain-jane file shares? Is there a more recommended way to replicate these millions of files and make them available on the network? EDIT: I would experiment on my own and write a blog post about it, but I don't have the hardware for the second server yet. I'd like to collect information before buying 45 TB of hard drive space...

  Read the article

• Is HDCP working for ATI/AMD cards on windows 8?

  - by Joel Barsotti

  I have an AMD 6950 and am running windows 8 RTM. I've tried the Catalyst 12.8 drivers and the 12.9 beta drivers. With either drive HDCP seems to be non operational. I've got two dell monitors, one a u2410 and the other a 2408wfp. Both were previously identified as supporting HDCP in windows 7 with the same hardware. I've tested the monitors individual on both DVI and display port, and neither one works. I'm using cyberlinks BD-Advisor to test. My end goal is getting the DirecTv2PC app working again, which is by cyberlink for DirecTV, and requires HDCP. Currently it shuts off when you start playing a recording.

  Read the article

• NVIDIA Driver Crashing on Custom-Built Windows 7 PC

  - by srunni

  I've got a custom-built PC with these specs: Fractal Design Define R3 ASUS P8Z77-V motherboard Intel Core i7-2700k with Thermalright HR-02 Macho Cooler NVIDIA GeForce GTX 560 with Arctic Cooling Accelero Twin Turbo II Cooler Crucial M4 128 GB SSD 1 TB Hitachi HDD G.SKILL Ares Series 2x8 GB RAM (x2) SeaSonic 520W PSU Windows 7 Ultimate SP1 (x64) NVIDIA driver version 301.42 Upon building the PC, I overclocked the CPU (but never the GPU), and there were no problems for 1-2 months. Then I started getting crashes with this error when doing anything that's computationally or graphically intensive: I un-overclocked the CPU, but that hasn't fixed anything. This is what the inside of my case looks like: I'd appreciate any guidance on resolving this problem. I did get some of the thermal paste on the graphics card when installing the aftermarket cooler, but there were no issues for a month or two. Update I did a clean install and the issue persisted - looks like it's a hardware issue. I will try removing/cleaning/reseating all the parts.

  Read the article

• OpenVZ multiple networks on CTs

  - by user6733

  I have Hardware Node (HN) which has 2 physical interfaces (eth0, eth1). I'm playing with OpenVZ and want to let my containers (CTs) have access to both of those interfaces. I'm using basic configuration - venet. CTs are fine to access eth0 (public interface). But I can't get CTs to get access to eth1 (private network). I tried: # on HN vzctl set 101 --ipadd 192.168.1.101 --save vzctl enter 101 ping 192.168.1.2 # no response here ifconfig # on CT returns lo (127.0.0.1), venet0 (127.0.0.1), venet0:0 (95.168.xxx.xxx), venet0:1 (192.168.1.101) I believe that the main problem is that all packets flows through eth0 on HN (figured out using tcpdump). So the problem might be in routes on HN. Or is my logic here all wrong? I just need access to both interfaces (networks) on HN from CTs. Nothing complicated.

  Read the article

• win2003 server problem

  - by Tavo

  I used to have a server with win2000 OS. Yesteday I updated it to win2003 server R2 service pack 2. My problem now is that in a particular moment nobody can access the server. All of the shared resource of the server are unavailable. The only solution is to restart the server although the server is running fine. I don't think that is a connection problem of the LAN, because with the win2000 this problem didn't happend. The PC is connected to the same switch and the PC have the same exact hardware.

  Read the article

• How to clean this Dell Precision M6400

  - by Daniel Pratt

  I have (well, ok, my employer has and I use) a Dell Precision M6400 notebook. It's a decent piece of hardware, but I have at least one major gripe: It's a dust and...uh...crumb (I repent! I repent!) magnet! And I cannot seem to exorcise the dust/crumbs from it! There is a strip of metal above the keyboard that is punched full of tiny holes. Well, maybe it's better to describe them as 'pits'. If a sufficiently small particle finds its way into one of those pits, there is only about a 50% that I will manage to get it out. Consequently, there is now a chorus of tiny little particles silently chiding me about eating cookies a cracker whilst I browse the intarwebs. Does anyone have any suggestions about how I could remove these particles from this machine...while still preserving the function of the machine?

  Read the article

• Running multipul lines through a server.

  - by Kevin Roberson

  I am looking to buy numbers in bulk on DIDx.net. After I purchase the numbers in a particular area code, I want to forward those numbers to other numbers that are outside of that area code. This way it will be seen as a local call versus long distance. I have the customers but I don't have the system I need. I have read about Asterisk, VOIP, SIP, and BYOH. But I have no clue what will be the best system for me. Does anyone have any idea what my next step should be when it comes to hardware and software? Or what type of operating system I should use? I basically want to set up a system like GoogleVoice & Phonebooth.

  Read the article

• Canon HV20 recognized, but no drivers in Windows 7 x64

  - by Tuminoid

  My Canon HV20 camcorder is properly recognized when connected via Firewire to Windows 7 x64, but no drivers are installed for it. Windows or I cannot locate any drivers for it as, but it should be working off-the-shelf. I googled a lot, and found instructions to set IEEE 1394 host to legacy mode via Device Manager, but Windows doesn't offer me the legacy option at all. If I check the properties of Canon&HV20 device in Other devices section it says The drivers for this device are not installed. (Code 28) There is no driver selected for the device information set or element. It used to work just fine on my previous installation of Vista x64 and same hardware :/

  Read the article

• Start Menu freezes when highlighting 'All Programs'

  - by gergesi

  Hey all, A friends machine is lagging for about 30 seconds when they highlight 'All Programs'. A gray box popus up where the program menu would be, but it doesnt populate for nearly 30 seconds. This seems to happen if he hasn't open the start menu for a bit.. but if he get's it working once, doing it immediatly afterwards will usually not have the same lag. Assuming computer hardware isn't an issue, any ideas what the problem may be? Sidenote: He mentioned making desktop shortcuts is taking long as well, does that give any clues?

  Read the article

• PC Speaker sounds when machine locks up.

  - by d.c

  What would cause my PC speaker to sound a low frequency continuous tone as my system locks up? Generally what will happen is I'll notice the application I'm using will stop responding but explorer will be partially responsive, then after a few more actions explorer stops responding, and the last click will cause the pc speaker to emit a low constant tone as the machine locks up completely. The only resolve at that point is to restart. Its not a thermal issue, I'm reading the cpu, and hdd temps with software and hardware monitors. AV and malware scans come up clean. I've swapped out my ram, reseated all my components. Used sfc with no results. chkdisk locks up at 3% and defragmenting does the same, but I can read the drive without trouble (I know this as I've done av/malware scans and I also backed everything up since this started happening) I'm mostly just interested to learn, if anyone knows, why the pc speaker would sound during the lock up. windows xp sp2

  Read the article

• Web/Cloud Based OS with Torrent Features and Free Storage?

  - by Kristina E

  Hi, I want a web-based OS with a torrent client and I want to link it to one of the many free cloud storage solutions. I think it would be really cool to be able to check and download torrents anywhere and not use my hardware or connection until I want to transfer the files down to my actual desktop (like burning a Linux ISO or to convert the file to a IFO format). Anywyas, I created accounts at 4Shared, EyeOS, GlideOS, ADrive and iCloud and am having no luck. There is an eyeTorrent app but I can't seem to get it configured and I can't log into my cloud storage from the cloud OS. Has anyone been able to pull this off and if so would you please explain how? Thanks, Kristina

  Read the article

• How do you keep up with Nagios/Capistrano configs when using EC2?

  - by imaginative

  I use Amazon EC2 for my mobile app. Depending on load of the application at a given time, I might spawn new instances and then take them down when load is lower to save costs. How does one keep up with Nagios configurations for such a dynamic environment? When one deals with managed hardware, configuration files are predictable. In this case Nagios, Capistrano and a bunch of other configuration files would need to be added. Capistrano needs to know where to deploy a new build to for an app server. Nagios needs to know to remove an existing instance or add a new instance for monitoring. Nagios also needs to know if a node was intentionally taken down or if the host is down due to error. How is this done with the wonderful world of VPS/dynamic instances?

  Read the article

• Proper way to partition filesystem with Xen

  - by luckytaxi

  I'm coming from a vmware environment, wanting to play with Xen. I have a server with 2 x 500G SATA drives (no hardware RAID available, have to use software-based RAID1). My partitions are all RAID1 except for swap. I left a little over 400G for my VMs and I would like to use LVM for the disk images. For domU's swap, should I allocate that from the 400G or should that be coming from dom0's partition? I asked because I've seen numerous config options that shows either or.

  Read the article

• Duplicate name exists solution

  - by user978733

  I have about 70 pc's with exactly same hardware. I decided to automate turning on and off. I took 1 PC. Here is what I've done: Changed bios configuration so that now pc's waking when I turn on AC switch Installed Windows XP and configured so that I can turn off remotelly, changed workgroup name to "WG1", and pc name to "ExamPC" Then created acronis backup image of this pc I installed this image in several PC's and tried to test All worked well till windows opened. The problem is, all tested PC's started Windows nearly at the same time, and all of them popped up error Duplicate name exist. I can't figure out any solution. Any suggestions?

  Read the article

• Make laptop boot to external monitor

  - by Ozzy

  Hi all. Heres my setup: Dell 1737 2x Dell U2311H The laptop lid is always closed and is wall mounted behind the monitors. Every time i boot the laptop, i have to open the lid a little until it goes to the win 7 logon screen. Once there, i close the lid and both monitors get detected and the laptop screen switches off. As the laptop is wall mounted how ever, its really tedious to keep opening and closing the lid. Is there any way i can make it default to the external monitors permanently? Any suggestions are welcome, even hardware mods. Im willing to rip apart the laptop to install a switch or something if needs be lol

  Read the article

< Previous Page | 204 205 206 207 208 209 210 211 212 213 214 215  | Next Page >