Search Results

Search found 20388 results on 816 pages for 'nvidia current'.

Page 208/816 | < Previous Page | 204 205 206 207 208 209 210 211 212 213 214 215  | Next Page >

• How can I stop Ubuntu from playing audio from 2 interfaces at the same time?

  - by Solignis

  Hi there, I just loaded Ubuntu 10.10 Maverick on my home machine. The machine is running a Core2Duo E6750 on an MSI motherboard with an Nvidia GTX260-OC Graphics card. The problem I am having as stated in the title is for some reason Ubuntu is playing audio through my headphone coming out from the computer and it is also playing the audio at the exact same time through the HDMI connection coming out of the graphics card, it has a plug to allow this. What is going on, I have never seen this before. Most importantly of all can it be fixed so that I can sepertate the 2 interfaces, the one is a standard PC audio IO and the HDMI one is connected through the mobo's internal SPDIF. More information can be provided if required.

  Read the article

• Sync desktop Mac environment to laptop

  - by Andrew Vit

  I spend the majority of my time working at my desktop Mac, which I have configured for my web development environment. My spouse has a MacBook for casual use, and I occasionally steal it back when I need to work off-site, or when travelling. The question is how to best synchronize the two so I can switch between them more readily. I've solved a few obvious things by using online services: Email is hosted on IMAP. Working files are in Dropbox. Source code is managed in git. However, the following are things I always miss when jumping on the laptop: Installed Applications (current versions) Installed libraries & utilities (/usr/local) Apache VirtualHosts & other configurations (/etc) Disk image files for VMs My current method is to connect the MacBook via Firewire target mode and rsync the /Users/me home directory, and then cherry-pick the other items I need from Applications, /etc and /usr/local. The problem with this method is that it can be very time consuming due to things like my virtual machine image files, cached emails, etc. How can I make this faster & easier? Can you recommend a solution for configuration management (so I can repeatably install & configure the same software on both), or synchronization (so I can bring the MacBook up to date nightly, over our home network)?

  Read the article

• Monit unable to start sidekiq on Opsworks server

  - by webdevtom

  I have used AWS Opsworks to create some servers. I have Sidekiq running as part of my Rails application. When I deploy Sidekiq restarts nicely. I am configuring Monit to watch the pid and start and stop Sidekiq if there are any issues. However when Monit trys to start Sidekiq I see that the wrong Ruby looks to be used. Oct 17 13:52:43 daitengu sidekiq: /usr/local/lib/ruby/gems/1.9.1/gems/bundler-1.3.4/lib/bundler/definition.rb:361:in `validate_ruby!': Your Ruby version is 1.8.7, but your Gemfile specified 1.9.3 (Bundler::RubyVersionMismatch) Oct 17 13:52:43 daitengu sidekiq: from /usr/local/lib/ruby/gems/1.9.1/gems/bundler-1.3.4/lib/bundler.rb:116:in `setup' Oct 17 13:52:43 daitengu sidekiq: from /usr/local/lib/ruby/gems/1.9.1/gems/bundler-1.3.4/lib/bundler/setup.rb:17 When I run the command from the cli Sidekiq launches correctly. $> cd /srv/www/myapp/current && RAILS_ENV=production nohup /usr/local/bin/bundle exec sidekiq -C config/sidekiq.yml >> /srv/www/myapp/shared/log/sidekiq.log 2>&1 & $> ps -aef |grep sidekiq root 1236 1235 8 20:54 pts/0 00:00:50 sidekiq 2.11.0 myapp [0 of 25 busy] My sidekiq.monitrc file check process unicorn with pidfile /srv/www/myapp/shared/pids/unicorn.pid start program = "/bin/bash -c 'cd /srv/www/myapp/current && /usr/local/bin/bundle exec unicorn_rails --env production --daemonize -c /srv/www/myapp/shared/config/unicorn.conf'" stop program = "/bin/bash -c 'kill -QUIT `cat /srv/www/myapp/shared/pids/unicorn.pid`'"

  Read the article

• How to set up IP forwarding on Nexenta (Solaris)?

  - by Gleb

  I am trying to set up IP forwarding on my Nexenta box: root@hdd:~# uname -a SunOS hdd 5.11 NexentaOS_134f i86pc i386 i86pc Solaris The box has 2 network interfaces: root@hdd:~# ifconfig -a lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 e1000g1: flags=1001100843<UP,BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4,FIXEDMTU> mtu 1500 index 2 inet 192.168.12.2 netmask ffffff00 broadcast 192.168.12.255 ether 68:5:ca:9:51:b8 myri10ge0: flags=1100843<UP,BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4> mtu 9000 index 3 inet 10.10.10.10 netmask ffffff00 broadcast 10.10.10.255 ether 0:60:dd:47:87:2 lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252 index 1 inet6 ::1/128 192.168.12.0 is my normal LAN with 192.168.12.1 being the firewall/gateway 10.10.10.0 is a separate LAN for iSCSI (with no internet access) I want to set up IP forwarding so that a computer on 10.10.10.0 will be able to access the internet by using 10.10.10.10 as a gateway (I don't need any port forwarding) I have turned on IP forwarding: root@hdd:~# routeadm Configuration Current Current Option Configuration System State --------------------------------------------------------------- IPv4 routing disabled disabled IPv6 routing disabled disabled IPv4 forwarding enabled enabled IPv6 forwarding disabled disabled Routing services "route:default ripng:default" Routing daemons: STATE FMRI disabled svc:/network/routing/rdisc:default disabled svc:/network/routing/route:default disabled svc:/network/routing/legacy-routing:ipv4 disabled svc:/network/routing/legacy-routing:ipv6 disabled svc:/network/routing/ripng:default online svc:/network/routing/ndp:default But when I dry to start ipnat, I get an error: root@hdd:~# ipnat -CF -f /etc/ipf/ipnat.conf ioctl(SIOCGNATS): I/O error Here is the config: root@hdd:~# cat /etc/ipf/ipnat.conf #!/sbin/ipnat -f - # map e1000g1 10.10.10.10/24 -> 192.168.12.2/32 So the question is how to fix this.. Thanks in advance!

  Read the article

• Mac Mini server (10.6) behind router with FQDN hostname

  - by thechriskelley

  I have a Mac Mini running Mac OS 10.6.6 Server that will be part of a local network, and a static IP from my ISP. I'd like to set up DNS for the Mini with a FQDN as the hostname (example.com) properly. The Mini is behind a router (Apple Airport Extreme) and is given a private, static IP address. I can't assign it the public static IP directly because it's behind a router with DHCP/NAT for other machines on the local net. My end goal here is for services to resolve to the server properly from outside and inside the local network to users via example.com (and subdomains like mail.example.com, www.example.com), which will point to the public static IP assigned to the router. Will DNS work/resolve properly (for mail services and other subdomains) if it has a private ip address, but the necessary services are forwarded properly through NAT? I'm open to any (hopefully better) suggestions, as my current setup doesn't seem like it's the best way. Currently, more hardware or another public static IP is not possible. With the current setup, it seems as though one static IP is not necessary anyway. Thanks in advance for any insight.

  Read the article

• Apache2 MPM-prefork MPM-worker multiple instances on same Ubuntu host machine possible?

  - by user60985

  I have a live Apache2/MPM-Worker instance running Django. I want to also run an Apache2/MPM-prefork instance to run some Drupal6 applications on the same host machine and utilize a vast selection of PHP modules that run on the prefork model. I plan to use my MPM-worker instance to reverse proxy to the Apache2-prefork instance for URLS starting with myhost.com/drupal6/. It seems theoretically doable/configurable by having the second Apache2-prefork instance configured to listen on an internal port, say 127.0.0.1:8080 and having my current Apache2-worker configured to proxy pass and reverse pass to it for the 'drupal6' URLs. However, how do I compile or install the apache2-prefork version so it has a different executable name than /usr/sbin/apache2, for example /usr/sbin/apache2p, and so apache2ctl has a different name, say apache2pctl, and that apache2pctl invokes the /usr/sbin/apache2p instead of /usr/sbin/apache2... and so on down the line (eg /etc/apache2p) so I can start and restart my two instances independently? As I understand it, no one executable of 'apache2' can be compiled with both the MPM-prefork and MPM-worker modules, so it seems I need two separate versions of the apache2 MPM flavors. But then I need to invoke and control them by separate names, I assume. I looked at the configuration options for apache2 and I am a bit queasy about compiling a second apache2 version with prefork because I am not sure I can set all the options so that none of my current apache2 files is overwritten. Is there a way? Is there a standard solution to separately installing and controlling prefork and worker apache2 executables on the same machine without them stepping on each other during installation or operation?

  Read the article

• How can I switch between the HDMI and DVI outputs of my graphics card?

  - by Owen Melbourne

  I've got an Nvidia GTX 560ti card which currently I've got my 2 monitors hooked up to using the 2 DVI ports. However its got a mini-HDMI port which I've plugged a HDMI cable in (with mini adapter) and lead it into my TV which is across the room. I'm hoping to be able to toggle between the HDMI output and the DVI outputs, however I'm not sure how I'd go about this, Could somebody please point me in the right direction, I'm not really worried about having all 3 on at the same time so that isn't a problem, but if its possible then I'll do that.

  Read the article

• Apache 2.4 Prefork vs. PHP-FPM Event shows sig decrease in requests per second

  - by Mark

  On my Apache 2.4.2 server with a standard mod_php Prefork setup these are my server-status results Current Time: Wednesday, 24-Oct-2012 19:36:24 CDT Restart Time: Wednesday, 24-Oct-2012 01:27:30 CDT Parent Server Config. Generation: 1 Parent Server MPM Generation: 0 Server uptime: 18 hours 8 minutes 54 seconds Total accesses: 14304233 - Total Traffic: 342.3 GB CPU Usage: u12584.6 s721.93 cu.66 cs3.43 - 20.4% CPU load 219 requests/sec - 5.4 MB/second - 25.1 kB/request 507 requests currently being processed, 355 idle workers ______KKKKR_K______W_KKC___CKK_K_K_W__CC_KKK_KK._K_K_KK._KKKK_K_ K_____KK_KKKK_K_KK__K___KK_K___K_____CKKK_WK_K_____KCKK__K___K_K K_CK_K_K_____K__KKKK_K__K___K_KK_K_K_KKKCK____________KK_CK__KKK __C_KKKKKKK___CK___C_KKK_K__C__K_CK____KKK__K__K__K_K__KK_CK_K__ _KKKKK_K_W__KK______K___K__W___C_K__K____KKKKKKKK.KKKKKKKCK_K___ _C_KK_K_WK__K_KK__K__RK_KK___K____K_KK_K_K___RKC_KKKK___KKKC_K_W _C_KK_KK__W____KC__KKK__KKK___K___KKK_KK_K_KKW__K_KR_KK_KK__KKK_ R__KKK__KKKKKK__K_KKKKK_K__K_K___KKW_________KK_K___KKK___KK.K_C KKKKKKW_____K__K_KKC_KCKK_K_KK_K__KK__K___K__KK_KK__________KK__ __K___KK_K__K_C_KK_K___KK__KK__K__KCK_K__KK_________K_K_KK__.K__ K_CKK.CCRW__KKKKKKKKKKKC__W____K___KWK_KK_KKC______.K_K_KK_KKKC_ __KKK_W_KCKKK_K_K____CCCK__KC_KKKK_K____K_CK_K____K__K____KKK_KK KK___K_K_K__KW__KCKKKK____WKWK__K_KKRKK__C_K_KK_KK_K__KKCC_K__C_ KK_K___K_KK______K_____CKK_K_______KK_CKCK__KKKKK____K__K..K____ __KKWK_KW__KKK__K_KKK___K_KK_KKK__KK___KK___KK_KK___KK____KKWKKC KK_KKKK_................................` When I switch to a PHP-FPM setup with the Event MPM with no other variables changes, my requests/sec plummet and overall apache response is garbage. Current Time: Wednesday, 24-Oct-2012 19:51:21 CDT Restart Time: Wednesday, 24-Oct-2012 19:48:03 CDT Parent Server Config. Generation: 1 Parent Server MPM Generation: 0 Server uptime: 3 minutes 18 seconds Total accesses: 18720 - Total Traffic: 307.1 MB CPU Usage: u16.57 s4.74 cu0 cs0 - 10.8% CPU load 94.5 requests/sec - 1.6 MB/second - 16.8 kB/request 15 requests currently being processed, 49 idle workers PID Connections Threads Async connections total accepting busy idle writing keep-alive closing 11701 114 no 10 22 0 66 38 11702 134 no 5 27 0 81 48 Sum 248 15 49 0 147 86 __R_R__W___RRW________RR__R___W_W_______W_____W_____________R_R_ Is there any obvious reason anyone could think of why this would be the case. I can provide any other additional stats or server setup info to help out. Ive tried tweaking everything up and down and nothing really helps get the PHP-FPM setup anywhere near a baseic prefork/mod-php setup. Thanks!

  Read the article

• Lighttpd - byte range request doesn't work. can't stream mp4

  - by w-01

  Am attempting to use the lastest flowplayer. (if it could work it would be pretty awesome btw) http://flowplayer.org One of the cool things about it is it uses the new HTML5 video element and supports random seeking/playback. In order to do this, you need a byte range request capable server on the backend. Luckily I'm using Lighttpd 1.5.0 on the backend. Unfortunately the current behavior is that when I do a random seek, the video simply restarts itself from the beginning. the docs say: "For HTML5 video you don't have to do any client side configuration. If your server supports byte range requests then seeking should work on the fly. Most servers including Apache, Nginx and Lighttpd support this." On my page, using chrome web developer tools, i can see when the video is requested, the server response headers indicate it is able to acce[t byte ranges. Accept-Ranges:bytes when I do random seek in the player, I can see that that byte ranges are request appropriately in the request header: Range: bytes=5668-10785 I can also verify the moov atom is at the front of the video file. My question here is if there is something else on the lighttpd side i'm missing in order to enable byte-range requests? The reason i ask is because the current behavior suggests that the lighttpd simply doesn't understand the byte range request and is just reserving the video from the beginning. Update it's clearer to put this here. As per RJS' suggestion I ran a curl command. in the response it looks like lighttpd is working as expected. Content-Range: bytes 1602355-18844965/18844966 Content-Length: 17242611

  Read the article

• Skype Connect as SIP/Trunk for Asterisk

  - by Kaurin

  First off: I'm not sure if this should be on superuser or here. I have recently built a few Asterisk boxes with OpenVOX FXO/FXS ports little or no trouble. My current project is building an Asterisk box with SIP trunks. My current employer insisted on getting Skype Business/Skype connect for that purpose. After reviewing the Skype Connect plan, I agreed, because I thought it is going to be straightforward: Purchase G729 licences and setup SIP trunk/trunks. Boy was i wrong :) Here is the setup: The setup is for calling US numbers only via skype (we got skype US minute bundles in skype connect) AsteriskNOW - Asterisk 1.4 + asterisk-gui Trunks: SIP Trunk configured with Skype Connect - shows as registered Users: 2 test extensions. Both work fine when calling each other, voicemail etc works fine too The asterisk box is behind a Mikrotik router which i configured to forward all relevant ports: 5060-5090 UDP, 10000-20000 UDP. When trying out an extension outside of my LAN, it worked. I could make calls to the other extension. Outgoing rule: _NXXXXXXXXX Strip:0 Prepend:+1 Use skype trunk Inbound rule: Trunk: Skype Pattern: s Destination: Extension1 (6210) Here is the output of asterisk CLI (-rvvvvv) with outgoing calls: http://pastebin.com/eWVpL72e you can see the circuit-busy response when using trunk1 (skype) When calling my Skype Connect number from the outside, I get nothing in the logs. Can anyone with Skype Connect / Asterisk experience help out? :)

  Read the article

• How can I use the Homebrew Python with Homebrew MacVim on Mountain Lion?

  - by Stephen Jennings

  I originally asked and answered this question: How can I use the Homebrew Python version with Homebrew MacVim? These instructions worked on Snow Leopard using Xcode 4.0.1 and associated developer tools. However, they no longer seem to work on Mountain Lion with Xcode 4.4.1. My goal is to leave the system's version of Python completely untouched, and to only install PyPI packages into Homebrew's site-packages directory. I want to use the vim_bridge package in MacVim, so I need to compile MacVim against the Homebrew version of Python. I've edited the MacVim formula to add these to the arguments: --enable-pythoninterp=dynamic --with-python-config-dir=/usr/local/Cellar/python/2.7.3/Frameworks/Python.framework/Versions/Current/lib/python2.7/config Then I install with the command: brew install macvim --override-system-vim --custom-icons --with-cscope --with-lua However, it still seems to be somehow using Python 2.7.2 from the system. This seems strange to me because it also seems to be using the correct executable. :python print(sys.version) 2.7.2 (default, Jun 20 2012, 16:23:33) [GCC 4.2.1 Compatible Apple Clang 4.0 (tags/Apple/clang-418.0.60)] :python print(sys.executable) /usr/local/bin/python $ /usr/local/bin/python --version Python 2.7.3 $ /usr/local/bin/python -c "import sys; print(sys.version)" 2.7.3 (default, Aug 12 2012, 21:17:22) [GCC 4.2.1 Compatible Apple Clang 4.0 ((tags/Apple/clang-421.0.60))] $ readlink /usr/local/lib/python2.7/config /usr/local/Cellar/python/2.7.3/Frameworks/Python.framework/Versions/Current/lib/python2.7/config I've removed everything in /usr/local and reinstalled Homebrew by running these commands: $ ruby <(curl -fsSkL raw.github.com/mxcl/homebrew/go) $ brew install git mercurial python ruby $ brew install macvim (nope, still broken) $ brew remove macvim $ ln -s /usr/local/Cellar/python/..../python2.7/config /usr/local/lib/python2.7/config $ brew install macvim

  Read the article

• btrfs: can i create a btrfs file system with data as jbod and metadata mirrored

  - by Yogi

  I am trying to build a home server that will be my NAS/Media server as well a the XBMC front end. I am planning on using Ubuntu with btrfs for the NAS part of it. The current setup consists of 1TB hdd for the OS etc and two 2TB hdd's for data. I plan to have the 2TB hdd's used as JBOD btrfs system in which i can add hdd's as needed later, basically growing the filesystem online. They way I had setup the file system for testing was while installing the OS just have one of the HDD's connected and have btrfs on it mounted as /data. Later on add another hdd to this file system. When the second disk was added btrfs made as RAID 0, with metadata being RAID 1. However, this presents a problem: even if one of the disk fails I loose all my data (mostly media). Also most of the time the server will be running without doing any disk access, i.e. the HDD's can be spun down, when a access request comes in this with the current RAID 0 setup both disks will spin up. in case I manage a JBOD only the disk that has the file needs to be spun up. This should hopefully reduce the MTBF for each disk. So, is there a way in which I can have btrfs setup such that metadata is mirrored but data stays in a JBOD formation? Another question I have is this, I understand that a full drive failure in JBOD will lose data on the drive, but having metadeta mirrored across all drives, will this help the filesytem correct errors that migh creep in (ex bit rot?) and is btrfs capable of doing this.

  Read the article

• PSU requirement question for my PC setup.

  - by user69474

  I understand that sometimes there may be a situation where the PSU is way more than required but in this case of mine, I'm not too sure. Sometimes when I play games, my computer will crash and restarts itself, 10 mins into the game. Once I received a message that says something like the power is overheating or something like that. Ok, so I have a 500W PSU. I have: 1x Internal DVD writer 1x SATA 250GB HD 1x Nvidia 8500 GT 2GB RAM. As I'm planning to get an additional 250GB SATA HD, I wonder if I need to increase my PSU as well -- in full knowledge of the previous crashes experienced before. Should I upgrade my PSU to 650W perhaps, or is that excessive?

  Read the article

• Using NginX and Apache alongside for both static and dynamic files

  - by faridv

  Background: I've searched a lot and found these useful threads about using of Apache or NginX for static or dynamic files. But they are old (mostly about 1 or 2 years ago) and I think both webservers, specifically Nginx has had important changes in performance and usage. So I think take another look on these issue cannot be that bad. Nginx (for static files) and Apache (for dynamic content)? nginx better than apache for dynamic content? [closed] Apache or NGINX for PHP? Nginx as reverse proxy to Apache with only dynamic content? My question: I have a PHP web application with lots of dynamic files and lots of static contents (videos, images etc.) and it's currently running on a CentOS 6 server and Apache 2.2 since 2 months ago. In past few days, number of our site visitors have gained so fast and I just thought if this number continues to increase with current ratio, we need to change many things (web server, application, etc.) to prevent failures. Because of hardware limitations that we are facing, I thought that it's best for us to start with web server. Should I start with something else? Should I try to increase performance of my PHP application and forget about web server for now? (even if gonna take a long time!) Because of huge usage of .htaccess files (for redirection, rewrites, etc.), I think it's gonna be painful to migrate to NginX as default web server or maybe only for dynamic files. Does this mean that I can't even use Nginx as reverse proxy? I'm not sure latest stable version of NginX and PHP-FPM have a better performance over my current Apache and my limitations (too many things) won't let me to give it a try. Which one is doing better currently? What will I lose by migrating to Nginx? To make it short, what should I do?

  Read the article

• How to watch 3D on Acer "3D Ready" projector?

  - by glenneroo

  We have here a Acer P1200 DLP projector which is "3D Ready" (using the BrilliantColor™ DarkChip™ 3) and documentation was not included in the packaging. We don't have a Blu-ray player and have no intention of purchasing one in the near future so I'm looking for a way to view encoded or streamed content. My question is: How is it possible to watch 3D content? What extra hardware/software will I need? EDIT: Found this information in the user manual: DLP 3D function: Choose while using DLP 3D glasses, quad buffer (NVIDIA/ATI…) graphic card and HQFS format file or DVD with corresponding SW player. 3D Sync L/R: If you see a discrete or overlapping image while wearing DLP 3D glasses, you may need to execute "Invert" to get best match of left/ right image sequence to get the correct image (for DLP 3D). ...but I'm still at a loss. What is a quad buffer graphics card?

  Read the article

• Why does 1080p through a VGA cable fit my HDTV but is oversized when through an HDMI cable?

  - by GraemeF

  I have put together a new PC with a XFX GeForce GTX 260 graphics card and have it connected to my HDTV. First, I used an old VGA cable with a DVI to VGA adapter and plugged it in to my HDTV's VGA port. Running at 1920x1080 it fit the screen perfectly. Now, to avoid running another cable across the room, I have connected it with a DVI to HDMI cable to my TV's HDMI port, and the desktop at 1920x1080 is cropped by the edge of the screen. I have "fixed" the cropping by using NVIDIA's "Adjust desktop size and position" tool, which created a screen resolution of 1814x1022 to fit the screen, but this is no longer the TV's native resolution and confuses some software (e.g. WoW). Why does VGA work as expected, but HDMI is scaled up? Can it be avoided?

  Read the article

• Purge print driver cache on windows 7 with powershell script

  - by Doltknuckle

  [Background] We have been having trouble with our network clients suddenly being unable to print. They get an odd error with a hex code. We determined that something in the driver was messed up and we could resolve the issue by clearing the driver cache and reinstalling the driver. This happens to random computers every so often. We're assuming this is a bug with the latest Dell 2330dn driver since that is the only model that has this problem. [Problem] What we are looking to do is write a Powershell script that would clear the driver cache and redownload the driver. I see a ton of scripts out there to manage queues, servers, and ports, but nothing for local driver cache management. [Current Workaround] Since we have to do this manually, I'll write out the steps so you know what we want this script to replicate. Disable print spooler Restart machine Delete contents of: C:\windows\system32\spool\drivers\w32x86 Enable print spooler and start service. Delete the network printer object and re-add network printer off of server. [Request] I'm good enough with powershell to translate the above workaround into a pair of scripts. I'd like to find a more elegant solution then my current workaround. Any suggestions?

  Read the article

• See former key sequences in vim

  - by Vasiliy Sharapov

  Sometimes I share screen shots and clips of vim usage with others. It would be nice to expand on the part of the status bar highlighted in this picture: I would like some way to make previous key sequences visible as well, such as: y2w jj f[ p 2d - You can see the key sequences leading up to the current one. I'll elaborate on my wish list at the bottom. Is something like this is available as a plugin or vim script? The sheer number of scripts available on vim online makes this hard to find by keyword. Some features I would hope for (but seem improbable): Delimit key sequences with a non-keyboard character instead of space, and a different one for the current command, so y2w jj f[ p 2d might become y2w¦jj¦f[¦p » 2d Replace keys that have a letter alternative with the alternative, such as the right arrow key - ^[[C with the equivalent l. Edit: To clarify, the right arrow key is a valid key in vim, but has no character to represent it, the l key preforms the same function and could/should substitute it. Have previous keystrokes run all the way to the beginning of the line (instead of just one or two), and just have vim's command prompt overwrite it when necessary. Replace some keystrokes with a more elegant alternative, for example hhhhh with 5h or more impressively d2f) with d% (in the appropriate situation).

  Read the article

• Switch Windows 8 from a hybrid MBR/GPT => GPT only on Macbook Pro Retina

  - by Sid

  I used DiskUtility+Bootcamp Wizard to setup my hard drive for Windows 8 (final MSDN). Somewhere in that process, the Apple tools turned my GPT disk into a hybrid MBR/GPT. All my 4 primary MBR partitions are used up, so when I try turning on Bitlocker in Windows 8, it complains about not finding a System drive. I know on Windows 8 the Bitlocker setup tries to create the 200(?)MB system partition if it's missing. However with all 4 partitions filled I suspect it can't create system drive = it can't find it = throws back an error like "BitLocker Setup could not find a target system drive. You may need to manually prepare your drive for BitLocker". I've already tried disabling hibernation, swap file etc. Now I'm thinking that if I were to get rid of the MBR scheme altogether, perhaps I can be alright within the GPT world without MBR's 4 primary partitions limit. So, how can I get rid of the MBR tables on the hybrid scheme in a manner that still leaves Mac OS and Windows 8 in working conditions? Details: Hardware is the MacbookPro Retina. Primary MBR partitions are consumed as follows: EFI partition HFS+ partition (=encrypted, therefore ="Apple_CoreStorage") HFS+ partition (Recovery partition, contains unencrypted Mac bootloader) NTFS partition (Windows8 all-in-one partition) diskutil list output sid-mbpr:~ sid$ diskutil list /dev/disk0 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *251.0 GB disk0 1: EFI 209.7 MB disk0s1 2: Apple_CoreStorage 160.0 GB disk0s2 3: Apple_Boot Recovery HD 650.0 MB disk0s3 4: Microsoft Basic Data Win8 90.1 GB disk0s4 GPT vs MBR addresses sid-mbpr:~ sid$ sudo gptsync /dev/rdisk0 Password: Current GPT partition table: # Start LBA End LBA Type 1 40 409639 EFI System (FAT) 2 409640 312909639 Unknown 3 312909640 314179175 Mac OS X Boot 4 314179584 490233855 Basic Data Current MBR partition table: # A Start LBA End LBA Type 1 1 409639 ee EFI Protective 2 409640 312909639 ac Apple RAID 3 312909640 314179175 ab Mac OS X Boot 4 * 314179584 490233855 07 NTFS/HPFS Status: GPT partition of type 'Unknown' found, will not touch this disk.** **: Ignore this message, the gptsync tool is old and doesn't understand the UUID for "Apple_CoreStorage" / FileVault2 partitions. Since LBA addresses are alright, safe to ignore this message.

  Read the article

• Windows 7 Not Starting and System Repair Not Loading

  - by Mark

  I have a Dell Inspiron 1545 running Windows 7 When turning on my PC I keep receiving a black screen with the option to use System Repair or Start Normally. Both options lead me to the System Repair background except no matter how long I wait the system restore options never show up. Choosing F8 and running all of the options including safe mode encounters the same result above. I tried to to use 2 system recovery disks 32x and 64x I downloaded and both lead to similiar results. When I choose System Repair running from the disk the System Repair Question asking to select a language pops ups but after this no matter how long I wait no other options appear. Next after restarting and selecting F8 (after hitting f12 and running from CD) I choose 'Run From Safe Mode with Command Prompt' I am able to run all of the options from System Restore with differing results: Startup Repair: Choosing this ends up in system repair indefinitely (left running 12 hrs) System Restore: Does Nothing. PC thinks for a second and then stops. When selecting ShutDown I see an error message stating there are no restore points. System Image Recovery: Service Cannot be started in Safe Mode Windows Memory Diagnostic: Runs test but then leads to system repair background which never loads system repair Command Prompt: chkdsk /r -Cannot Lock Current Drive...write protected. chkdsk /f -Cannot Lock Current Drive...write protected. bootcfg - Cannot open Boot.Ini file bootcfg - Ran all 3 (rebuildBcd, FixMbr and Fixboot) but PC still goes to System Repair background with no repair options popping up upon restart (without recovery CD). I'm on the verge of purchasing a boot utility disk for $50 unless there is anything else short of "take it to a computer shop" that somebody can suggest I try.

  Read the article

• Windows 7 using exactly HALF the installed memory

  - by Nathan Ridley

  I've taken this directly from system information: Installed Physical Memory (RAM) 4.00 GB Total Physical Memory 2.00 GB Available Physical Memory 434 MB Total Virtual Memory 5.10 GB Available Virtual Memory 1.19 GB Page File Space 3.11 GB Also the BIOS reports a full 4GB available. Note the 4gb installed, yet 2gb total. I understand that on a 32 bit operating system, you'll never get the full 4gb of ram, however typically you'll get in the range of 2.5-3.2gb of ram. I have only 2gb available! My swap file goes nuts when I do anything! Note that I have dual SLI nvidia video cards, each with 512mb of on board ram, though I have the SLI feature turned off. Anybody know why Windows might claim that I have exactly 2gb of ram total? Note: previously asked on SuperUser, but closed as "belongs on superuser" before this site opened: http://serverfault.com/questions/39603/windows-7-using-exactly-half-the-installed-memory (I still need an answer!)

  Read the article

• Load Testing a Security/Gateway Appliance

  - by Joel Coel

  In a couple weeks I will load testing a security/gateway appliance. We're a small residential college, and that "residential" means the traffic moving through the appliance is a bit like the Wild West. We have everything from Facebook to World of Warcraft, BitTorrent to Netflix, or Halo to YouTube... basically anything you might find in the home of a high-school or college aged person. Somewhere in there some real academic work gets done as well. We rely on our current appliance for traffic shaping, antivirus, malware filtering, intrusion detection on our servers, logging and abuse reporting, and even some content filtering. All this puts a decent load when we have students around, and I'm concerned about the ability of the new candidate to keep up. On paper it should handle things, but I'm worried. Prior experience is that vendors greatly over-report what an appliance can handle. The product also includes a licensed session limit, and I'm also worried that just a few misbehaving students could unwittingly bring us to that limit and cause service disruptions. I need to know this will work for our campus in order to commit to it. Going a performance level higher in that product takes the pricing way out of line with what we expect and have done in the past. What I need is a good way to load test this guy. My problem is that our current level of summer traffic is less than one percent of what it will be when students come back just six weeks from now. Any ideas on how to really stress this thing and see what it can do, in a way that will give me some clear ideas o. How that will scale for our campus? For the curious, I'm looking at a Watchguard 515, but it could be anything. If I were evaluating a competitor, I'd ask the same question.

  Read the article

• Linux Flash Player with 2 Monitors: always full-screen on primary monitor

  - by CarlF

  My setup at home uses a laptop, with a larger external monitor in addition to the built-in LCD panel, which is primary. I can see the larger monitor from the rest of the room and use it as my TV, for playing DVDs and various types of web video. However, it isn't ideal for Flash video. For instance, if I watch a video from Hulu or any other Flash-based site, I can expand it to full-screen mode. However, no matter which monitor the browser window is on, the full-screen mode is always on the laptop LCD panel, which is both too small and not visible from most of the room. Does anyone know of a way to force the Flash video to play full-screen on the monitor I select instead of the primary? My video chipset is NVidia, using kernel 2.6.31 (Ubuntu). Thanks.

  Read the article

• How this could happen to my ftp server?

  - by srisar

  hi, again me, i just dont get why i m getting this message, when i try to connect my ftp server thorugh my wan address (112.135.26.115) its saying me, 530 user access denied but when i give the same data to http://ftptest.net the result is as follows... Status: Resolving address of 112.135.26.115 Status: Connecting to 112.135.26.115 Status: Connected, waiting for welcome message Reply: 220-FileZilla Server version 0.9.34 beta Reply: 220-written by Tim Kosse ([email protected]) Reply: 220 Please visit http://sourceforge.net/projects/filezilla/ Status: CLNT http://ftptest.net on behalf of 112.135.26.115 Reply: 200 Don't care Status: USER saravana Reply: 331 Password required for saravana Status: PASS ********* Reply: 230 Logged on Status: SYST Reply: 215 UNIX emulated by FileZilla Status: FEAT Reply: 211-Features: Reply: MDTM Reply: REST STREAM Reply: SIZE Reply: MLST type*;size*;modify*; Reply: MLSD Reply: AUTH SSL Reply: AUTH TLS Reply: UTF8 Reply: CLNT Reply: MFMT Reply: 211 End Status: PWD Reply: 257 "/" is current directory. Status: Current path is / Status: TYPE I Reply: 200 Type set to I Status: PASV Reply: 227 Entering Passive Mode (112,135,26,115,43,9) Status: MLSD Reply: 150 Connection accepted Listing: type=dir;modify=20100322113235; it_is_working!_Andrejs_Cainikovs_from_serverfault.com Listing: type=file;modify=20100322110559;size=5; New Text Document.txt Reply: 226 Transfer OK Status: Success can anyone say why this happens to me? please im trying the whole day!!

  Read the article

• Leightweight Linux distro to install on my old PC

  - by Juri

  Hi, I have an old PC at home which is mainly used by my Mom or my brother just to browse the web and maybe open some PDFs / docs. Till now I had Win2000 installed, but it performs very poorly. So I thought about installing Linux on it. Could someone give me some suggestions for a leightweight Linux distribution which works well?? Is standard Ubuntu too heavy?? PC details CPU: Athlon AMD ~1211 MHz RAM: 1GB Grafics Card: NVidia GeForce FX 5200 (not so relevant,but still) Thx for your suggestions.

  Read the article

< Previous Page | 204 205 206 207 208 209 210 211 212 213 214 215  | Next Page >