Search Results

Search found 8219 results on 329 pages for 'less'.

Page 209/329 | < Previous Page | 205 206 207 208 209 210 211 212 213 214 215 216  | Next Page >

  • Outlying DBAs

    - by steveh99999
    Read an interesting book recently, ‘Outliers – the story of success’ by Malcolm Gladwell. There’s a good synopsis of the book here on wikipedia. I don’t want to write in detailed review of the book, but it’s well worth a read. There were a couple of sections which I thought were possibly relevant to IT professionals and DBAs in particular. Firstly, ‘the 10,000 hour rule’, in this section Gladwell asserts that to be a real ‘elite performer’ takes 10,000 hours of practice. ‘Practice isn’t the thing you do once you’re good, it’s the thing you do that makes you good’.  He gives many interesting examples – the Beatles, Bill Gates etc – but I was wondering could this be applied to DBAs ? If it takes 10,000 hours to be a really elite DBA – how long does that really take ? 8 hours a day makes 1250 days. If we assume that most DBAs work around 230 days a year – then it takes around 5 and a half years to become an elite DBA.   But how much time per day does a DBA spend actually doing DBA work ? Certainly it’s my experience that the more experienced I get as a DBA, the less time I seem to spend actually doing DBA work – ie meetings, change-control meetings, project planning, liasing with other teams, appraisals etc.  Is it more accurate to assume that a DBA spends half their time actually doing ‘real’ DBA work – or is that just my bad luck ?   So, in reality, I’d argue it can take at least 5 1/2 and more likely closer to 10 years to become an elite DBA. Why do I keep receiving CVs for senior DBAs with 2-4 years actual DBA experience ? In the second section I found particularly interesting, Gladwell writes about analysis of plane crashes and the importance of in-cockpit communications. He describes a couple of crashes involving Korean Airlines – where co-pilots were often deferrential to pilots, and unwilling to openly criticise their more senior colleagues or point out errors when things were going badly wrong… There’s a better summary of Gladwell’s concepts on mitigation  here – but to apply this to a DBA role… If you are a DBA and you do not agree with  a decision of one of your superiors, then it’s your duty as a DBA to say what you think is wrong, before it’s too late…  Obviously there’s a fine line between constructive criticism and moaning, but a good senior DBA or manager should be able to take well-researched criticism\debate from a more junior DBA.   Is this really possible ?

    Read the article

  • Walmart's Mobile Self-Checkout

    - by David Dorf
    Reuters recently reported that Walmart was testing an iPhone-based self-checkout at a store near its headquarters.  Consumers scan items as they're placed in the physical basket, then the virtual basket is transferred to an existing self-checkout station where payment is tendered.  A very solid solution, but not exactly original. Before we go further, let's look at the possible cost savings for Walmart.  According to the article: Pushing more shoppers to scan their own items and make payments without the help of a cashier could save Wal-Mart millions of dollars, Chief Financial Officer Charles Holley said on March 7. The company spends about $12 million in cashier wages every second at its Walmart U.S. stores. Um, yeah. Using back-of-the-napkin math, I calculated Walmart's cashiers are making $157k per hour.  A more accurate statement would be saving $12M per year for each second saved on the average transaction time.  So if this self-checkout approach saves 2 seconds per transaction on average, Walmart would save $24M per year on labor.  Maybe.  Sometimes that savings will be used to do other tasks in the store, so it may not directly translate to less employees. When I saw this approach demonstrated in Sweden, there were a few differences, which may or may not be in Walmart's plans.  First, the consumers were identified based on their loyalty card.  In order to offset the inevitable shrink, retailers need to save on labor but also increase basket size, typically via in-aisle promotions.  As they scan items, retailers should target promos, and that's easier to do if you know some shopping history.  Last I checked, Walmart had no loyalty program. Second, at the self-checkout station consumers were randomly selected for an audit in which they must re-scan all the items just like you do at a typical self-checkout.  If you were found to be stealing, your ability to use the system can be revoked.  That's a tough one in the US, especially when the system goes wrong, either by mistake or by lying.  At least in my view, the Swedes are bit more trustworthy than the people of Walmart. So while I think the idea of mobile self-checkout has merit, perhaps its not right for Walmart.

    Read the article

  • Is there an API for determining congressional districts?

    - by ardavis
    I'm looking to determine the congressional district based on an address my user is providing. This will avoid having the user to look it up themselves. Does an API of this sort exist? Note Through my attempts to find one, I've only come across these: http://www.govtrack.us/developers/api (not sure how to submit an an address or zip code however) The following resources are available in the API ...Bills and resolutions in the U.S. Congress since 1973 (the 93rd Congress). ...A (bill, person) pair indicating cosponsorship, with join and withdrawn dates. ...Members of Congress and U.S. Presidents since the founding of the nation. ...Terms held in office by Members of Congress and U.S. Presidents. Each term corresponds with an election, meaning each term in the House covers two years (one 'Congress'), as President four years, and in the Senate six years (three 'Congresses'). ...Roll call votes in the U.S. Congress since 1789. How people voted is accessed through the Vote_voter API. ...How people voted on roll call votes in the U.S. Congress since 1789. See the Vote API. Filter on the vote field to get the results of a particular vote... http://www.opencongress.org/api (seems to be a way to find congress information, but not districts) This API provides programmers with structured access to all the data on OpenCongress, everything from official bill info to news and blog coverage to user-generated votes on bills and much more... This API defaults to returning XML. All queries can also return JSON... https://groups.google.com/forum/?fromgroups=#!topic/opendems-discuss/CeKyi_aANaE (similar question, no resolution) I've been looking over Open Dems, and seeing what's exposed at this point and what isn't. I work with Democrats Abroad, and am interested in using stuff from the lab for their sites. I quickly looked over the Precinct API, which does both more and less than what I'd need. An ideal resource would be any way of translating addresses into CD at the very least (getting state district data would be good as well), since that would make it easier for DA's membership to make a difference in races like last month's NY26 race... Update I'm looking at the source for the govtrack.us website and the 'doGeoCode' function may be useful. view-source:http://www.govtrack.us/congress/members If no one has any suggestions, I will try to go off of what they are doing.

    Read the article

  • Facebook Game database design

    - by facebook-100000781341887
    Hi, I'm currently develop a facebook mafia like PHP game(of course, a light weight version), here is a simplify database(MySQL) of the game id-a <int3> <for index> uid <chr15> <facebook uid> HP <int3> <health point> exp <int3> <experience> money <int3> <money> list_inventory <chr5> <the inventory user hold...some special here, talk next> ... and 20 other fields just like reputation, num of combat... *the number next to the type is the size(byte) of the type For the list_inventory, there have 40 inventorys in my game, (actually, I have 5 these kind of list in my database), and each user can only contain 1 qty of each inventory, therefore, I assign 5 char for this field and each bit of char as 1 item(5 char * 8 bit = 40 slot), and I will do some manipulation by PHP to extract the data from this 5 byte. OK, I was thinking on this, if this game contains 100,000 user, and only 10% are active, therefore, if use my method, for the space use, 5 byte * 100,000 = 500 KB if I use another method, create a table user_hold_inventory, if the user have the inventory, then insert a record into this table, so, for 10,000 active user, I assume they got all item, but for other, I assume they got no item, here is the fields of the new table id-b <int3> <for index> id-a <int3> <id of the user table> inv_no <int1> <inventory that user hold> for the space use, ([id] (3+3) byte + [inv_no] 1 byte ) * [active user] 10,000 * [all inventory] * 40 = 2.8 MB seems method 2 have use more space, but it consume less CPU power. Please comment these 2 method or please correct me if there have another better method rather than what I think. Another question is, my database contain 26 fields, but I counted 5 of them are not change frquently, should I need to separate it on the other table or not? So many words, thanks for reading :)

    Read the article

  • Cheating on Technical Debt

    - by Tony Davis
    One bad practice guaranteed to cause dismay amongst your colleagues is passing on technical debt without full disclosure. There could only be two reasons for this. Either the developer or DBA didn’t know the difference between good and bad practices, or concealed the debt. Neither reflects well on their professional competence. Technical debt, or code debt, is a convenient term to cover all the compromises between the ideal solution and the actual solution, reflecting the reality of the pressures of commercial coding. The one time you’re guaranteed to hear one developer, or DBA, pass judgment on another is when he or she inherits their project, and is surprised by the amount of technical debt left lying around in the form of inelegant architecture, incomplete tests, confusing interface design, no documentation, and so on. It is often expedient for a Project Manager to ignore the build-up of technical debt, the cut corners, not-quite-finished features and rushed designs that mean progress is satisfyingly rapid in the short term. It’s far less satisfying for the poor person who inherits the code. Nothing sends a colder chill down the spine than the dawning realization that you’ve inherited a system crippled with performance and functional issues that will take months of pain to fix before you can even begin to make progress on any of the planned new features. It’s often hard to justify this ‘debt paying’ time to the project owners and managers. It just looks as if you are making no progress, in marked contrast to your predecessor. There can be many good reasons for allowing technical debt to build up, at least in the short term. Often, rapid prototyping is essential, there is a temporary shortfall in test resources, or the domain knowledge is incomplete. It may be necessary to hit a specific deadline with a prototype, or proof-of-concept, to explore a possible market opportunity, with planned iterations and refactoring to follow later. However, it is a crime for a developer to build up technical debt without making this clear to the project participants. He or she needs to record it explicitly. A design compromise made in to order to hit a deadline, be it an outright hack, or a decision made without time for rigorous investigation and testing, needs to be documented with the same rigor that one tracks a bug. What’s the best way to do this? Ideally, we’d have some kind of objective assessment of the level of technical debt in a software project, although that smacks of Science Fiction even as I write it. I’d be interested of hear of any methods you’ve used, but I’m sure most teams have to rely simply on the integrity of their colleagues and the clear perceptions of the project manager… Cheers, Tony.

    Read the article

  • Visual studio Real Dark mode (2010,2012,2013)

    - by Anirudha
    Originally posted on: http://geekswithblogs.net/anirugu/archive/2013/11/02/visual-studio-real-dark-mode-201020122013.aspxWhen Visual studio 2010 released back in 3 year ago I soon show a demo to some people that how Dark mode of Visual studio will be great idea. Soon we got some theme plugin  which make us able to modify the look of visual studio.   http://studiostyl.es/ already provide lots of wonderful color scheme that make you able to modify the theme. These themes are also work in webmatrix 2.  Webmatrix 2 have a plugin for themes that is made by Yishai Galatzer that is awesome for webmatrix 2.   In Visual studio 2012 we got a native dark mode. This means we can configure it without any plugin or requirement of anything. In this post I have a demo to show you how to use Dark mode that is part of Windows 7 (and windows 8 too).   Few months ago I show a problem that webmatrix 2 run slow. it’s run better in windows 7 dark mode. Windows 7 dark mode simply refer to right click > personalize > High contrast theme in bottom of windows. This setting make thing a little bit faster.   When you have set this you have seen that Visual studio doesn’t react good anymore because it’s color scheme is broken now. What you need now is import any theme from http://studiostyl.es/ When you import this this will look good as this.   This is the demo look of Windows 7 phone Express 2010. It will react same for future version as 2012, 2013. Now see your VS react look dark. Everything is dark now. Your Firefox and IE will not run totally in blackish mode but you can use chrome. Chrome have less effect of dark. Now if you benchmark it then you will feel that everything that take a long time in loading now run fast.   Note :- This is experiments. Remember to have settings backup before apply new theme. All thing I do is make my VS run faster. If you have any trouble or idea please comment it.   Thanks for read my post

    Read the article

  • ArchBeat Link-o-Rama for 2012-08-29

    - by Bob Rhubart
    ORCLville: OOW 2012 - Crystal BallOracle ACE Director Floyd Teter cooks up some tongue-in-cheek predictions for news and announcements that might come out of Oracle OpenWorld 2012. What's your prediction? Oracle Optimized Solutions at Oracle OpenWorld 2012 | Oracle Hardware Hardware matters, too! The people behind the Oracle Hardware blog have put together a list of Oracle Openworld 2012 sessions focused Oracle Optimized Solutions, "designed, pre-tested, tuned and fully documented architectures for optimal performance and availability." Just plug the session ID numbers into Schedule Builder and you're good to go. AIX Checklist for stable OBIEE deployment | Dick Dunbar "OBIEE is a complicated system with many moving parts and connection points," according to Oracle Business Inteligence escalation engineer Dick Dunbar. "The purpose of this article is to provide a checklist to discuss OBIEE deployment with your systems administrators." Demo for OPN: Coherence Management with EM Cloud Control 12c Oracle Partner Network members can check out a new Coherence Management demo that showcases some of the key capabilities of Management Pack for Oracle Coherence and JVM Diagnostics. "The demo flow showcases the key enhancements made in Enterprise Manager 12c release which includes new customizable performance summary, cache data management and configuration management," according to the WebLogic Partner Community EMEA blog. The Pragmatic Architect: To Boldly Go Where No One Has Gone Before | Frank Buschmann "Many architects have technical knowledge that's both impressive and sound, which is indeed an inevitable basis for design success," says Frank Buschmann. "Yet, a lot of software projects fail or suffer due to severe challenges in their architecture. The key to mastery is how architects approach design, what they value, and where they focus their attention and work." As retail dies, whom will be the winners? | Peter Evans-Greenwood "The problem for many retailers is that how consumers shop has changed but the the retailers haven't adapted, " says Peter Evans-Greenwood. "Their sole virtue was to be the last step in a supply chain delivering somebody else's products to the consumer. However, being the last step in the supply chain is no longer a virtue when consumers skip across channels and can reach around the globe, no longer dependant on or limited to what they can find locally." Thought for the Day "Brains require stimulation. If you're locked into a pattern of work, work, and more work, your brain soon habituates - the same way that it lets you stop hearing a clock ticking. So, if you want to be more effective at work, you must, paradoxically, be less single-minded in your devotion to work. Anything you do—anything—that stimulates new segments of your brain will make you a more effective programmer or analyst. I promise, with a money-back guarantee." — Gerald M. Weinberg Source: SoftwareQuotes.com

    Read the article

  • As a tooling/automation developer, can I be making better use of OOP?

    - by Tom Pickles
    My time as a developer (~8 yrs) has been spent creating tooling/automation of one sort or another. The tools I develop usually interface with one or more API's. These API's could be win32, WMI, VMWare, a help-desk application, LDAP, you get the picture. The apps I develop could be just to pull back data and store/report. It could be to provision groups of VM's to create live like mock environments, update a trouble ticket etc. I've been developing in .Net and I'm currently reading into design patterns and trying to think about how I can improve my skills to make better use of and increase my understanding of OOP. For example, I've never used an interface of my own making in anger (which is probably not a good thing), because I honestly cannot identify where using one would benefit later on when modifying my code. My classes are usually very specific and I don't create similar classes with similar properties/methods which could use a common interface (like perhaps a car dealership or shop application might). I generally use an n-tier approach to my apps, having a presentation layer, a business logic/manager layer which interfaces with layer(s) that make calls to the API's I'm working with. My business entities are always just method-less container objects, which I populate with data and pass back and forth between my API interfacing layer using static methods to proxy/validate between the front and the back end. My code by nature of my work, has few common components, at least from what I can see. So I'm struggling to see how I can better make use of OOP design and perhaps reusable patterns. Am I right to be concerned that I could be being smarter about how I work, or is what I'm doing now right for my line of work? Or, am I missing something fundamental in OOP? EDIT: Here is some basic code to show how my mgr and api facing layers work. I use static classes as they do not persist any data, only facilitate moving it between layers. public static class MgrClass { public static bool PowerOnVM(string VMName) { // Perform logic to validate or apply biz logic // call APIClass to do the work return APIClass.PowerOnVM(VMName); } } public static class APIClass { public static bool PowerOnVM(string VMName) { // Calls to 3rd party API to power on a virtual machine // returns true or false if was successful for example } }

    Read the article

  • It is CX a new concept?

    - by Isabel F. Peñuelas
    The Marketing Industry and the Web Industry are talking about CX since some time. However it is only very recently that the concept has reached some common meaning accepted by the analysts’ and the IT community. The new CX model depends on two previous facts: the expansion of the social media, and the impact of the new advanced features of mobile devices regarding brand-customer interaction. CXsers vs UXers First there is some need of disambiguity between User Experience and Customer Experience. User Experience -UX, is a much well established concept related with the design of user interactions for particular devices. UX people are interested on multiple touch points of digital interfaces while CX people are interested on all kind of interfaces including physical ones. UX is an evolution of Web Usability, while CX is a marketing concept. UX is an instrument of User Experience. CX in fact is all about Connections and Interactions. Connections Dan Draper, the creative director Mad Men, understands very well that to market effectively means to connect with people, and the best way to connect to people is to use the connections people have with other people: understanding Social Media connections and taking the customer pulse of customers on those medias, and are strong facilitators of CX strategies.  Interactions We can very simply define CX as the relationship that a customer establishes with a brand through multiple touch points (interactions, channels) through the entire life cycle of his relationship- direct or indirect with the brand. Interactions can be grouped on Customer Journeys through multiple touch points defined as the path a customer follows to achieve a goal. Processes A customer journey today usually starts at the moment he surfs the Web, then he takes a purchase decision; purchases the product;  request a particular service and finally recommends or do not recommends the product.  Customer Journeys are processes, and to analyze customer journeys there exists today a broad offering of modern Customer Journey tools very similar actually to the use cases or UML activity diagrams for IT systems design. As a summary CX is nothing more and nothing less than applying process analysis methods for better understanding how to create value through customer interactions across the multiple user´s touch points with the brand.

    Read the article

  • The Case of the Missing Date/Time Stamp: Reporting Services 2008 R2 Snapshots

    - by smisner
    This week I stumbled upon an undocumented “feature” in SQL Server 2008 R2 Reporting Services as I was preparing a demonstration on how to set up and use report snapshots. If you’re familiar with the main changes in this latest release of Reporting Services, you probably already know that Report Manager got a facelift this time around. Although this facelift was generally a good thing, one of the casualties – in my opinion – is the loss of the snapshot label that served two purposes… First, it flagged the report as a snapshot. Second, it let you know when that snapshot was created. As part of my standard operating procedure when demonstrating report snapshots, I point out this label, so I was rather taken aback when I didn’t see it in the demonstration I was preparing. It sort of upset my routine, and I’m rather partial to my routines. I thought perhaps I wasn’t looking in the right place and changed Report Manager from Tile View to Detail View, but no – that label was still missing. In the grand scheme of life, it’s not an earth-shattering change, but you’ll have to look at the Modified Date in Details View to know when the snapshot was run. Or hope that the report developer included a textbox to show the execution time in the report. (Hint: this is a good time to add this to your list of report development best practices, whether a report gets set up as a report snapshot or not!) A snapshot from the past In case you don’t remember how a snapshot appeared in Report Manager back in the old days (of SQL Server 2008 and earlier), here’s an image I snagged from my Reporting Services 2008 Step by Step manuscript: A snapshot in the present A report server running in SharePoint integrated mode had no such label. There you had to rely on the Report Modified date-time stamp to know the snapshot execution time. So I guess all platforms are now consistent. Here’s a screenshot of Report Manager in the 2008 R2 version. One of these is a snapshot and the rest execute on demand. Can you tell which is the snapshot? Consider descriptions as an alternative So my report snapshot demonstration has one less step, and I’ll need to edit the Denali version of the Step by Step book. Things are simpler this way, but I sure wish we had an easier way to identify the execution methods of the reports. Consider using the description field to alert users that the report is a snapshot. It might save you a few questions about why the data isn’t up-to-date if the users know that something changed in the source of the report. Notice that the full description doesn’t display in Tile View, so keep it short and sweet or instruct users to open Details View to see the entire description.

    Read the article

  • Remove Clutter from the Opera Speed Dial Page

    - by Asian Angel
    Do you want to clean up the Speed Dial page in Opera so that only the thumbnails are visible? Today we show you a couple of tweaks that will make it happen. Speed Dial Page The search bar and text at the bottom take up room and add clutter to the look and feel of Opera’s Speed Dial page. Changing the Settings Two small tweaks to the config settings will clean it all up. To get started type opera:config into the address bar and press enter. Type “speed” into the quick find bar and look for the Speed Dial State entry. Change the 1 to 2 and click save. You will see the following message concerning the changes…click OK. Next type “search” into the quick find bar and look for the Speed Dial Search Type entry. Remove all of the text in the blank and click save. Once again you will see a message about the latest change that you have made. At this point you may need to restart Opera for both changes to take full effect. There will be a noticeable difference in how the Speed Dial page looks afterwards and is much cleaner without the Search bar and text field. You will also still be able to access the right click context menu just like before. Conclusion If you have been looking to get a cleaner and less cluttered Speed Dial page in Opera, then these two little hacks will get the job done! Similar Articles Productive Geek Tips Set the Speed Dial as the Opera Startup PageReplace Google Chrome’s New Tab Page with Speed DialSpeed up Windows Vista Start Menu Search By Limiting ResultsBlank New Tab Quick-Fix for Google ChromeMonitor and Control Memory Usage in Google Chrome TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Backup Outlook 2010 Daily Motivator (Firefox) FetchMp3 Can Download Videos & Convert Them to Mp3 Use Flixtime To Create Video Slideshows Creating a Password Reset Disk in Windows Bypass Waiting Time On Customer Service Calls With Lucyphone

    Read the article

  • 3 Reasons You Need To Know Something About Every Technology

    - by Tim Murphy
    I make my living as a consultant and a general technologist.  I credit my success to the fact that I have never been afraid to pick up any product, language or platform needed to get the job done.  While Microsoft technologies I my mainstay, I have done work on mainframe and UNIX platforms and have worked with a wide variety of database engines.  Each one has it’s use and most times it is less expensive to find a way to communicate with an existing system than to replace it. So what are the main benefits of expending the effort to learn a new technology? New ways to solve problems Accelerate development Advise clients and get new business opportunities By new technology I mean ones that you haven’t had experience with before.  They don’t have to be the the one that just came out yesterday.  As they say, those who do not learn from history are bound to repeat it.  If you can learn something from an older technology it can be just as valuable as the shiny new one.  Either way, when you add another tool to your kit you get a new view on each problem you face.  This makes it easier to create a sound solution. The next thing you can learn from working with different products and techniques is how to more efficiently develop solve problems.  Many times if you are working with a new language you will find that there are specific design patterns that are used with it in normal use.  These can usually be applied with most languages.  You just needed to be exposed to them. The last point is about helping your clients and helping yourself.  If you can get in on technologies early you will have advantage over your competition in the market.  You will also be able to honestly advise you client on why they should or should not go with a new product.  Being able to compare products and their features is always an ability that stake holders appreciate. You don’t need to learn every detail of a product.  Learn enough to function and get an idea of how to use the technology.  Keep eating those technology Wheaties and you will be ready to go the distance in any project. del.icio.us Tags: Technology,technologists,technology generalist,Software Architecture

    Read the article

  • How to determine the source of a request in a distributed service system?

    - by Kabumbus
    Map/Reduce is a great concept for sorting large quantities of data at once. What to do if you have small parts of data and you need to reduce it all the time? Simple example - choosing a service for request. Imagine we have 10 services. Each provides services host with sets of request headers and post/get arguments. Each service declares it has 30 unique keys - 10 per set. service A: name id ... Now imagine we have a distributed services host. We have 200 machines with 10 services on each. Each service has 30 unique keys in there sets. but now to find to which service to map the incoming request we make our services post unique values that map to that sets. We can have up to or more than 10 000 such values sets on each machine per each service. service A machine 1 name = Sam id = 13245 ... service A machine 1 name = Ben id = 33232 ... ... service A machine 100 name = Ron id = 777888 ... So we get 200 * 10 * 30 * 30 * 10 000 == 18 000 000 000 and we get 500 requests per second on our gateway each containing 45 items 15 of which are just noise. And our task is to find a service for request (at least a machine it is running on). On all machines all over cluster for same services we have same rules. We can first select to which service came our request via rules filter 10 * 30. and we will have 200 * 30 * 10 000 == 60 000 000. So... 60 mil is definitely a problem... I hope to get on idea of mapping 30 * 10 000 onto some artificial neural network alike Perceptron that outputs 1 if 30 words (some hashes from words) from the request are correct or if less than Perceptron should return 0. And I’ll send each such Perceptron for each service from each machine to gateway. So I would have a map Perceptron <-> machine for each service. Can any one tall me if my Perceptron idea is at least “sane”? Or normal people do it some other way? Or if there are better ANNs for such purposes?

    Read the article

  • Using HBase or Cassandra for a token server

    - by crippy
    I've been trying to figure out how to use HBase/Cassandra for a token system we're re-implementing. I can probably squeeze quite a lot more from MySQL, but it just seems it has come to clinging on to the wrong tool for the task just because we know it well. Eventually will hit a wall (like happened to us in other areas). Naturally I started looking into possible NoSQL solutions. The prominent ones (at least in terms of buzz) are HBase and Cassandra. The story is more or less like this: A user can send a gift other users. Each gift has a list of recipients or is public in which case limited by number or expiration date For each gift sent we generate some token that uniquely identifies that gift. For each gift we track the list of potential recipients and their current status relating to that gift (accepted, declinded etc). A user can request to see all his currently pending gifts A can request a list of users he has sent a gift to today (used to limit number of gifts sent) Required the ability to "dump" or "ignore" expired gifts (x day old gifts are considered expired) There are some other requirements but I believe the above covers the essentials. How would I go and model that using HBase or Cassandra? Well, the wall was performance. A few 10s of millions of records per day over 2 tables kept for 2 weeks (wish I could have kept it for more but there was no way). The response times kept getting slower and slower until eventually we had to start cutting down number of days we kept data. Caching helps here but it's not an ideal solution since a big part of the ops are updates. Also, as I hinted in my original post. We use MySQL extensively. We know exactly what it can and can't do both in naive implementations followed by native partitioning and finally by horizontally sharding our dataset on the application level to reside on multiple DB nodes. It can be done, but that's not really what I'm trying to get from this. I asked a very specific question about designing a solution using a NoSQL solution since it's very hard to find examples for designs out there. Brainlag, not trying to come off as rude. I actually appreciate it a lot that you are the only one who even bothered to respond. but I see it over and over again. People ask questions and others assume they have no idea what they're talking about and give an irrelevant answer. Ignore RDBMS please. The question is about nosql.

    Read the article

  • Can a 10-bit monitor connection preserve all tones in 8-bit sRGB gradients on a wide-gamut monitor?

    - by hjb981
    This question is about color management and the use of a higher color depth, 10 bits per channel (30 bits in total, resulting in 1.07 billion colors, or 1024 shades of gray, sometimes referred to as "deep color") compared to the standard of 8 bits per channel (24 bits in total, 16.7 million colors, 256 shades of gray, sometimes referred to as "true color"). Do not confuse with "32 bit color", which usually refers to standard 8 bit color with an extra channel ("alpha channel") for transparency (used to achieve effects like semi-transparent windows etc). The following can be assumed to be in place: 1: A wide-gamut monitor that supports 10-bit input. Further, it can be assumed that the monitor has been calibrated to its native gamut and that an ICC color profile has been created. 2: A graphics card that supports 10-bit output (and is connected to the monitor via DisplayPort). 3: Drivers for the graphics card that support 10-bit output. If applications that support 10-bit output and color profiles would be used, I would expect them to display images that were saved using different color spaces correctly. For example, both an sRGB and an adobeRGB image should be displayed correctly. If an sRGB image was saved using 8 bits per channel (almost always the case), then the 10-bit signal path would ensure that no tonal gradients were lost in the conversion from the sRGB of the image to the native color space of the monitor. For example: If the image contains a pixel that is pure red in 8 bits (255,0,0), the corresponding value in 10 bits would be (1023,0,0). However, since the monitor has a larger color space than sRGB, sending the signal (1023,0,0) to the monitor would result in a red that was too saturated. Therefore, according to the ICC color profile, the signal would be transformed into a different value with less red saturation, for example (987,0,0). Since there are still plenty of levels left between 0 and 987, all 256 values (0-255) for red in the sRGB color space of the file could be uniquely mapped to color-corrected 10-bit values in the monitor's native color space. However, if the conversion was done in 8 bits, (255,0,0) would be translated to (246,0,0), and there would now only be 247 available levels for the red channel instead of 256, degrading the displayed image quality. My question is: how does this work on Ubuntu? Let's say that I use Firefox (which is color-aware and uses ICC color profiles). Would I get 10-bit processing, thus preserving all levels of an 8-bit picture? What is the situation like for other applications, especially photo applications like Shotwell, Rawtherapee, Darktable, RawStudio, Photivo etc? Does Ubuntu differ from other operating systems (Linux and others) on this point?

    Read the article

  • Multiple country-specific domains or one global domain [closed]

    - by CJM
    Possible Duplicate: How should I structure my urls for both SEO and localization? My company currently has its main (English) site on a .com domain with a .co.uk alias. In addition, we have separate sites for certain other countries - these are also hosted in the UK but are distinct sites with a country-specific domain names (.de, .fr, .se, .es), and the sites have differing amounts of distinct but overlapping content, For example, the .es site is entirely in Spanish and has a page for every section of the UK site but little else. Whereas the .de site has much more content (but still less than the UK site), in German, and geared towards our business focus in that country. The main point is that the content in the additional sites is a subset of the UK, is translated into the local language, and although sometimes is simply only a translated version of UK content, it is usually 'tweaked' for the local market, and in certain areas, contains unique content. The other sites get a fraction of the traffic of the UK site. This is perfectly understandable since the biggest chunk of work comes from the UK, and we've been established here for over 30 years. However, we are wanting to build up our overseas business and part of that is building up our websites to support this. The Question: I posed a suggestion to the business that we might consider consolidating all our websites onto the .com domain but with /en/de/fr/se/etc sections, as plenty of other companies seem to do. The theory was that the non-english sites would benefit from the greater reputation of the parent .com domain, and that all the content would be mutually supporting - my fear is that the child domains on their own are too small to compete on their own compared to competitors who are established in these countries. Speaking to an SEO consultant from my hosting company, he feels that this move would have some benefit (for the reasons mentioned), but they would likely be significantly outweighed by the loss of the benefits of localised domains. Specifically, he said that since the Panda update, and particularly the two sets of changes this year, that we would lose more than we would gain. Having done some Panda research since, I've had my eyes opened on many issues, but curiously I haven't come across much that mentions localised domain names, though I do question whether Google would see it as duplicated content. It's not that I disagree with the consultant, I just want to know more before I make recommendations to my company. What is the prevailing opinion in this case? Would I gain anything from consolidating country-specific content onto one domain? Would Google see this as duplicate content? Would there be an even greater penalty from the loss of country-specific domains? And is there anything else I can do to help support the smaller, country-specific domains?

    Read the article

  • At $20/month Windows Azure host my website with 99.97% uptime

    - by Gopinath
    Couple of years ago a reliable and decent performing Windows hosting was not affordable to many enthusiastic developers who want to try a startup idea or build a hobby site. I tried to start an ASP.NET website few years ago to provide services like – Mobile Tracing, Vehicle Tracing. But due to high cost of Windows hosting I developed those services using PHP (not an easy task for .NET developer) and hosted on them Linux servers.  But with recent evolution of Windows Azure, hosting ASP.NET websites on highly reliable servers is affordable. Today anyone can host a high responsive and available ASP.NET website for just $20/month using Windows Azure. My website coziie.com is running on Windows Azure and serves close to quarter millions visitors a month with 99.97% of uptime and most of the page load times are less than 3 seconds. All I spend to run this website is just around $20, if you translate it to India rupees its roughly Rs.1000. The web sever of coziie.com is powered by a single Extra Small Web role instance and the backend is powered by a SQL Azure instance. Azure is quite impressive to provide 99.97% of uptime. Response times during peak are around 3 seconds and on nomarl loads it is around 1.5 seconds. Here is the report of uptime provided by Royal Pingdom over last one year For just $20/month Windows Azure takes care of the following apart from hosting Patches up Windows OS to the latest version Upgrades ASP.NET to the latest version – coziie.com is running on ASP.NET MVC 3 and soon I’ll upgrade it to ASP.NET MVC 4 Hosts data on latest and best version Sql Server database SQL Azure maintains 3 copies of database and automatically recovers in case of server failures and disasters. I never worry about database backups/restore. Provides staging environment for deploying applications for testing purpose and move them to production – I upgrade  twice a month on average With Windows Azure I no longer focus on server maintenance or data backups. They are taken up by Microsoft team and I just focus on building my website. Wish there is a low cost Linux version of Windows Azure so that I can stop worrying about server maintenance of this blog!! If you are looking for a Windows hosting, look no further than Windows Azure. If you find $20/month is a bit expensive to start with you may explore Azure Website (sort of shared hosted environment) which is free to start with and as your traffic grows you can move to paid hosting.

    Read the article

  • Stuff I learned at Innovate 2011

    - by David Dorf
    After returning from the NRF Innovate 2011 conference, I picked up few nuggets I thought I'd share here.  These thoughts are a bit random, but I hope they're useful nonetheless.Kevin Kelly opened the conference with six verbs that represent the future.  They were Screening, Interacting, Sharing, Accessing, Flowing, and Generating.  It struck me that these are all ways in which we merge the digital and physical worlds.  The internet of things continues to gain momentum.Some buzzwords:  deal economy, subscription commerce, discovery (instead of search), curationThat last one, curation, came up over and over.  Retailers, especially those in fashion, are finding value in helping their customers organize and present their own collections.  Social media has made sharing such collections easy, and mobile lets them take those ideas into the stores.  Mannequins are becoming less relevant.I heard from both HauteLook and Gilt Groupe (flash sale retailers) that a large percentage of their visits come from mobile devices, and most of those are iOS devices.  I find it interesting that even though Android has passed iPhone in units shipped (and will eventually pass iOS as a whole), its still the Apple crowd that leads the way.RadioShack mentioned their Holiday Heroes campaigned was very successful.  They asked their Foursquare users to check-in at a gym, coffee shop, and transportation hub as part of being a hero.  For this feat, customers were awarded a special badge that was worth 20% off at their next store visit. They claim a 3.5x increase in ticket size vs. regular check-in customers, and a 5x increase vs those that don't check-in at all.I also learned of RadioShack's #28 campaign, which is apparently one of the largest Twitter trends ever.  Their partnership with LIVESTRONG has gotten them followers, impressions, and credit for supporting the fight against cancer.The guys at Invodo showed the importance of video to e-commerce.  They gave compelling examples of how video can show customers the value of products better than just words.The highlight of the show was Guy Kawasaki's talk on innovation, which was not only informative but also peppered with humor and personality.  Back in the early days of the internet boom, Guy turned down the CEO position at Yahoo! because the commute was too long.  By his calculation, that was a $2B mistake.There are other good accounts of the conference at the NRF Blog.

    Read the article

  • Is it evil to model JSON responses to classes when they are mostly smilar?

    - by Aybe
    Here's the problem : While implementing a C# wrapper for an online API (Discogs) I've been faced to a dilemma : quite often the responses returned have mostly similar members and while modeling these responses to classes, some questions surfaces on which way to go would be the best. Example : Querying for a 'release' or a 'master' will return an object that contains an array of 'artist', however these 'artists' do not exactly have the same members. Currently I decided to represent these 'artists' as a single 'Artist' class, against having respective 'ReleaseArtist' and 'MasterArtist' classes which soon becomes very confusing even though another problem arises : when a category (master or release) does not return these members, they will be null. Though it might sound confusing as well I find it less confusing than the former situation as I've tackled the problem by simply not showing null members when visualizing these objects. Is this the right approach to follow ? An example of these differences : public class Artist { public List<Alias> Aliases { get; set; } public string DataQuality { get; set; } public List<Image> Images { get; set; } public string Name { get; set; } public List<string> NameVariations { get; set; } public string Profile { get; set; } public string Realname { get; set; } public string ReleasesUrl { get; set; } public string ResourceUrl { get; set; } public string Uri { get; set; } public List<string> Urls { get; set; } } public class ReleaseArtist { public string Join { get; set; } public string Name { get; set; } public string Anv { get; set; } public string Tracks { get; set; } public string Role { get; set; } public string ResourceUrl { get; set; } public int Id { get; set; } }

    Read the article

  • Unable to ping inside or outside network with default gateway 0.0.0.0

    - by agentroadkill
    I've been around here before and I could usually piece together everything to more or less get myself up and running, but this time I'm truly stumped. I'm trying to connect my new 14.04 install to a network, and I'm forced to be behind my college's router. Now I've tested the vary cable that is right now plugged into my Ubuntu box on a Windows, Mac OS X, and even my friend's Ubuntu 14.04 box, and they all connect no problem. I've been trying to track this down for about two days, but every time I get close to it, the bug jumps to some other piece of my connection. Anyway, as it sits ifconfig -a gives: eth2 Lninkencap:Ethernet HWaddr:00:1f:bc:08:31:1d inet addr:10.32.51.51 Bcast:10.32.51.155 Mask: 255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 RX bytes:0 TX bytes:0 as well as the local loopback, but I'm assuming that is not an issue here. sudo dhclient -v eth2 returns: Listening on LPF/<hardware address of my integrated NIC, above> Sending on <same> Sending on Socket/fallback DHCPREQUEST of 10.32.51.51 on eth2 to 255.255.255.255 port 67 (xid=0x6f4a66ba) <two more lines of same> DHCPDISCOVER on eth2 to 255.255.255.255 port 67 interval 3 (xid=0x156f9fb4) <many more of above with varying intervals> No DHCPOFFERS received. Trying recorded lease 10.32.51.51 RTNETLINK answers: File exists bound: renewal in <large number> seconds If I then try ping 8.8.8.8, I get: connect: Network is unreachable /etc/resolv.conf only contains the two lines telling you not to edit it, while /etc/network/interfaces only has the loopback interface block in it. I've tried commenting out the "option rfc3442" line in /etc/dhcp/dhclient.conf which seemed to fix this issue for many people, as well as adding the line send vendor-class-indentifier "MSFT5.0" to dhclient.conf as well to tell the router I'm a windows box, in case they don't like Linux. Finally, route -n reveals: Destination Gateway Genmask Flags Metric Ref Use Iface 10.32.51.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2 I would like to apologize in advance for the doubtless butchered text alignment, but I'm obviously typing this all by hand, reading from the terminal as I type commands. I'm hoping this is an interesting problem, and not something I blithely stumbled past in my (apparent) over-confidence. TIA! Quick addendum before posting: The activity light on the ethernet port are lit and one blinks during boot, but they rarely (and seemingly randomly) do so afterwards (both are dark) even while running dhclient in the foreground. When I had the Ubuntu box tethered to my MacBook earlier, I got what looked like a normal power/uplink blinking pattern, but was unable to ping one from the other.

    Read the article

  • The Minimalist Approach to Content Governance - Create Phase

    - by Kellsey Ruppel
     Originally posted by John Brunswick. In this installment of our Minimalist Approach to Content Governance we finally get to the fun part of the content creation process! Once the content requester has addressed the items outlined in the Request Phase it is time to setup and begin the production of content.   For this to be done correctly it is important the the content be assigned appropriate workflow and security information. As in our prior phase, let's take a look at what can be done to streamline this process - as contributors are focused on getting information to their end users as quickly as possible. This often means that details around how to ensure that the materials are properly managed can be overlooked, but fortunately there are some techniques that leverage our content management system's native capabilities to automatically take care of some of the details. 1. Determine Access Why - Even if content is not something that needs to restricted due to security reasons, it is helpful to apply access rights so that the content ends up being visible only to users that it relates to. This will greatly improve user experience. For instance, if your team is working on a group project many of your fellow company employees do not need to see the content that is being worked on for that project. How - Make use of native content features that allow propagation of security and meta data from parent folders within your content system that have been setup for your particular effort. This makes it painless to enforce security, as well as meta data policies for even the most unorganized users. The default settings at a parent level can be set once the content creation request has been accepted and a location in the content management system is assigned for your specific project. Impact - Users can find information will less effort, as they will only be exposed to what they need for their work and can leverage advanced search features to take advantage of meta data assigned to content. The combination of default security and meta data will also help in running reports against the content in the Manage and Retire stages that we will discuss in the next 2 posts. 2. Assign Workflow (optional depending on nature of content) Why - Every case for workflow is going to be a bit different, but it generally involves ensuring that content conforms to management, legal and or editorial requirements. How - Oracle's Universal Content Management offers two ways of helping to workflow content without much effort. Workflow can be applied to content based on Criteria acting on meta data or explicitly assigned to content with a Basic workflow. Impact - Any content that needs additional attention before release is addressed, allowing users to comment and version until a suitable result is reached. By using inheritance from parent folders within the content management system content can automatically be given the right security, meta data and workflow information for a particular project's content. This relieves the burden of doing this for every piece of content from management teams and content contributors. We will cover more about the management phase within the content lifecycle in our next installment.

    Read the article

  • Addressing threats introduced by the BYOD trend

    - by kyap
    With the growth of the mobile technology segment, enterprises are facing a new type of threats introduced by the BYOD (Bring Your Own Device) trend, where employees use their own devices (laptops, tablets or smartphones) not necessarily secured to access corporate network and information.In the past - actually even right now, enterprises used to provide laptops to their employees for their daily work, with specific operating systems including anti-virus and desktop management tools, in order to make sure that the pools of laptop allocated are spyware or trojan-horse free to access the internal network and sensitive information. But the BYOD reality is breaking this paradigm and open new security breaches for enterprises as most of the username/password based systems, especially the internal web applications, can be accessed by less or none protected device.To address this reality we can adopt 3 approaches:1. Coué's approach: Close your eyes and assume that your employees are mature enough to know what he/she should or should not do.2. Consensus approach: Provide a list of restricted and 'certified' devices to the internal network. 3. Military approach: Access internal systems with certified laptop ONLYIf you choose option 1: Thanks for visiting my blog and I hope you find the others entries more useful :)If you choose option 2: The proliferation of new hardware and software updates every quarter makes this approach very costly and difficult to maintain.If you choose option 3: You need to find a way to allow the access into your sensitive application from the corporate authorized machines only, managed by the IT administrators... but how? The challenge with option 3 is to find out how end-users can restrict access to certain sensitive applications only from authorized machines, or from another angle end-users can not access the sensitive applications if they are not using the authorized machine... So what if we find a way to store the applications credential secretly from the end-users, and then automatically submit them when the end-users access the application? With this model, end-users do not know the username/password to access the applications so even if the end-users use their own devices they will not able to login. Also, there's no need to reconfigure existing applications to adapt to the new authenticate scheme given that we are still leverage the same username/password authenticate model at the application level. To adopt this model, you can leverage Oracle Enterprise Single Sign On. In short, Oracle ESSO is a desktop based solution, capable to store credentials of Web and Native based applications. At the application startup and if it is configured as an esso-enabled application - check out my previous post on how to make Skype essso-enabled, Oracle ESSO takes over automatically the sign-in sequence with the store credential on behalf of the end-users. Combined with Oracle ESSO Provisioning Gateway, the credentials can be 'pushed' in advance from an actual provisioning server, like Oracle Identity Manager or Tivoli Identity Manager, so the end-users can login into sensitive application without even knowing the actual username and password, so they can not login with other machines rather than those secured by Oracle ESSO.Below is a graphical illustration of this approach:With this model, not only you can protect the access to sensitive applications only from authorized machine, you can also implement much stronger Password Policies in terms of Password Complexity as well as Password Reset Frequency but end-users will not need to remember the passwords anymore.If you are interested, do not hesitate to check out the Oracle Enterprise Single Sign-on products from OTN !

    Read the article

  • Dealing with coworkers when developing, need advice [closed]

    - by Yippie-Kai-Yay
    I developed our current project architecture and started developing it on my own (reaching something like, revision 40). We're developing a simple subway routing framework and my design seemed to be done extremely well - several main models, corresponding views, main logic and data structures were modeled "as they should be" and fully separated from rendering, algorithmic part was also implemented apart from the main models and had a minor number of intersection points. I would call that design scalable, customizable, easy-to-implement, interacting mostly based on the "black box interaction" and, well, very nice. Now, what was done: I started some implementations of the corresponding interfaces, ported some convenient libraries and wrote implementation stubs for some application parts. I had the document describing coding style and examples of that coding style usage (my own written code). I forced the usage of more or less modern C++ development techniques, including no-delete code (wrapped via smart pointers) and etc. I documented the purpose of concrete interface implementations and how they should be used. Unit tests (mostly, integration tests, because there wasn't a lot of "actual" code) and a set of mocks for all the core abstractions. I was absent for 12 days. What do we have now (the project was developed by 4 other members of the team): 3 different coding styles all over the project (I guess, two of them agreed to use the same style :), same applies to the naming of our abstractions (e.g CommonPathData.h, SubwaySchemeStructures.h), which are basically headers declaring some data structures. Absolute lack of documentation for the recently implemented parts. What I could recently call a single-purpose-abstraction now handles at least 2 different types of events, has tight coupling with other parts and so on. Half of the used interfaces now contain member variables (sic!). Raw pointer usage almost everywhere. Unit tests disabled, because "(Rev.57) They are unnecessary for this project". ... (that's probably not everything). Commit history shows that my design was interpreted as an overkill and people started combining it with personal bicycles and reimplemented wheels and then had problems integrating code chunks. Now - the project still does only a small amount of what it has to do, we have severe integration problems, I assume some memory leaks. Is there anything possible to do in this case? I do realize that all my efforts didn't have any benefit, but the deadline is pretty soon and we have to do something. Did someone have a similar situation? Basically I thought that a good (well, I did everything that I could) start for the project would probably lead to something nice, however, I understand that I'm wrong. Any advice would be appreciated, sorry for my bad english.

    Read the article

  • Microsoft Azure News: Capturing VM Images

    - by Herve Roggero
    Originally posted on: http://geekswithblogs.net/hroggero/archive/2014/05/21/microsoft-azure-news-capturing-vm-images.aspxIf you have a Virtual Machine (VM) in Microsoft Azure that has a specific configuration, it used to be difficult to clone that VM. You had to sysprep the VM, and clone the data disks. This was slow, prone to errors, and stopped you from being productive. No more! A new option, called Capture, allows you to easily select a VM, running or not. The capture will copy the OS disk and data disks and create a new image out of it automatically for you. This means you can now easily clone an entire VM without affecting productivity.  To capture a VM, simply browse to your Virtual Machines in the Microsoft Azure management website, select the VM you want to clone, and click on the Capture button at the bottom. A window will come up asking to name your image. It took less than 1 minute for me to build a clone of my server. And because it is stored as an image, I can easily create a new VM with it. So that’s what I did… And that took about 5 minutes total.  That’s amazing…  To create a new VM from your image, click on the NEW icon (bottom left), select Compute/Virtual Machine/From Gallery, and select My Images from the left menu when selecting an Image. You will find your newly created image. Because this is a clone, you will not be prompted for a new login; the user id/password is the same. About Herve Roggero Herve Roggero, Microsoft Azure MVP, @hroggero, is the founder of Blue Syntax Consulting (http://www.bluesyntaxconsulting.com). Herve's experience includes software development, architecture, database administration and senior management with both global corporations and startup companies. Herve holds multiple certifications, including an MCDBA, MCSE, MCSD. He also holds a Master's degree in Business Administration from Indiana University. Herve is the co-author of "PRO SQL Azure" and “PRO SQL Server 2012 Practices” from Apress, a PluralSight author, and runs the Azure Florida Association.

    Read the article

  • Speaker Notes...

    - by wulfers
    At a .Net User Group meeting this week, I experienced two poorly prepared speakers floundering through presentations….  As a Lead Technologist at the company I work for, I have experience training technical staff and also giving presentations at code camps.  Here are a few guidelines for aspiring speakers you might find helpful…   1.       Do not stand in front of your audience and read your slides.  This is  offensive to your audience and not what they came for...  Your slides are there to reinforce the information you are presenting and to give the audience a little clarification on some terms you may use and as a visual aid for some complicated issues. 2.       Have someone review your presentation (slides, notes, …) who speaks the language you will be presenting in fluently.  Also record at least ten minutes of your presentation and have that same person review that.  One of the speakers this week used the word “Basically” fifty times in less than thirty minutes…  I started to flinch every time he used the term. 3.       Be Prepared  -  before the presentation begins.  Don’t make any last minute changes to your presentation or demo code the night before.  Don’t patch your laptop or demo servers the night before.  If possible create a virtual image that you only use for presentations and use that (refreshed before every presentation). 4.       Know the level of expertise of your audience.  Speaking above or below their abilities will make or break your presentation. 5.       Deliver what you promise. The presentation this week was supposed to be on BDD (Behavior Driven Develpment).  The presenter completely ran off track and 90% of the discussion was how his team mistakenly used TDD (Test Driven Development), and was unhappy with the results.  Based on his loss of focus we only heard a rushed 10 minute presentation on DBB which was a disservice to the audience. 6.       Practice your presentation with your own small team before you try this on a room full of people you don’t know.  A side benefit of doing this with your own team is that you can get candid feedback from your team and also get kudos for training your own team.  I find I can also turn my presentations into technical white papers and get a third benefit from the work I’ve put into a presentation. 7.       Sharpen your own saw.  Pick a topic that is fairly current.  Something you would like to learn about and would benefit your current career path. 8.       Have fun doing it.

    Read the article

< Previous Page | 205 206 207 208 209 210 211 212 213 214 215 216  | Next Page >