reference types - Page 209

SQL SERVER – Fix : Error : 3117 : The log or differential backup cannot be restored because no files

- by pinaldave

I received the following email from one of my readers. Dear Pinal, I am new to SQL Server and our regular DBA is on vacation. Our production database had some problem and I have just restored full database backup to production server. When I try to apply log back I am getting following error. I am sure, this is valid log backup file. Screenshot is attached. [Few other details regarding server/ip address removed] Msg 3117, Level 16, State 1, Line 1 The log or differential backup cannot be restored because no files are ready to roll forward. Msg 3013, Level 16, State 1, Line 1 RESTORE LOG is terminating abnormally. Screenshot attached. [Removed as it contained live IP address] Please help immediately. Well I have answered this question in my earlier post, 2 years ago, over here SQL SERVER – Fix : Error : Msg 3117, Level 16, State 4 The log or differential backup cannot be restored because no files are ready to rollforward. However, I will try to explain it a little more this time. For SQL Server database to be used it should in online state. There are multiple states of SQL Server Database. ONLINE (Available – online for data) OFFLINE RESTORING RECOVERING RECOVERY PENDING SUSPECT EMERGENCY (Limited Availability) If the database is online, it means it is active and in operational mode. It will not make sense to apply further log from backup if the operations have continued on this database. The common practice during the backup restore process is to specify the keyword RECOVERY when the database is restored. When RECOVERY keyword is specified, the SQL Server brings back the database online and will not accept any further log backups. However, if you want to restore more than one backup files, i.e. after restoring the full back up if you want to apply further differential or log backup you cannot do that when database is online and already active. You need to have your database in the state where it can further accept the backup data and not the online data request. If the SQL Server is online and also accepts database backup file, then there can be data inconsistency. This is the reason that when there are more than one database backup files to be restored, one has to restore the database with NO RECOVERY keyword in the RESTORE operation. I suggest you all to read one more post written by me earlier. In this post, I explained the time line with image and graphic SQL SERVER – Backup Timeline and Understanding of Database Restore Process in Full Recovery Model. Sample Code for reference: RESTORE DATABASE AdventureWorks FROM DISK = 'C:\AdventureWorksFull.bak' WITH NORECOVERY; RESTORE DATABASE AdventureWorks FROM DISK = 'C:\AdventureWorksDiff.bak' WITH RECOVERY; In this post, I am not trying to cover complete backup and recovery. I am just attempting to address one type of error and its resolution. Please test these scenarios on the development server. Playing with live database backup and recovery is always very crucial and needs to be properly planned. Leave a comment here if you need help with this subject. Similar Post: SQL SERVER – Restore Sequence and Understanding NORECOVERY and RECOVERY Note: We will cover Standby Server maintenance and Recovery in another blog post and it is intentionally, not covered this post. Reference : Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, Readers Question, SQL, SQL Authority, SQL Backup and Restore, SQL Error Messages, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

Read the article

Interview questions about ASP.NET Web services.

- by Jalpesh P. Vadgama

I have seen there are lots of myth’s about asp.net web services in fresher level asp.net developers. So I decided to write a blog post about asp.net web services interview questions. Because I think this is the best way to reach fresher asp.net developers. Followings are few questions about asp.net web services. 1) What is asp.net web services? Ans: Web services are used to support http requests that formatted using xml,http and SOAP syntax. They interact with through standards xml messages through Soap. They are used to support interoperability. It has .asmx extension and .NET framework contains http handlers for web services to support http requested directly. 2) What kind of data can be returned web services web methods? Ans: It supports all the primitive data types and custom data types that can be encoded and serialized by xml. You can find more information about that from the following link. http://msdn.microsoft.com/en-us/library/bb552900.aspx 3) Is web services are only written in asp.net? Ans: No, It can be written by Java and PHP languages also. 4) Explain web method attributes in web services Ans: Web method attributes are added to a public class method to indicate that this method is exposed as a part of XML web services. You can have multiple web methods in a class. But it should be having public attributes as it will be exposed as xml web service part. You can find more information about web method attributes from following link. http://msdn.microsoft.com/en-us/library/byxd99hx(v=vs.71).aspx 5) What is SOA? Ans: SOA stands for “Services Oriented Architecture”. It is kind of service oriented architecture used to support different kind of computing platforms and applications. Web services in asp.net are one of the technologies that supports that kind of architecture. You can call asp.net web services from any computing platforms and applications. 6) What is SOAP,WDSL and UDDI? Ans: SOAP stands “Simple Object Access protocol”. Web services will be interact with SOAP messages written in XML. SOAP is sometimes referred as “data wrapper” or “data envelope”.Its contains different xml tag that creates a whole SOAP message. WSDL stand for “Web services Description Language”. It is an xml document which is written according to standard specified by W3c. It is a kind of manual or document that describes how we can use and consume web service. Web services development software processes the WSDL document and generates SOAP messages that are needed for specific web service. UDDI stand for “Universal Discovery, Description and Integration”. Its is used for web services registries. You can find addresses of web services from UDDI.

Read the article

How To Apply Online For New Passport Or Renewal Of Your Passport [Indian Websites]

- by Gopinath

Are you bored wasting time and energy in standing lengthy queues at Passport offices in India to apply a new passport or renew it? Indian Government Passport Office has an online portal that lets you apply for new passport or renew your expiring passport by filling details online. By filling the details online you can complete half of the required formalities sitting at home and the rest of tasks like submitting required proofs, paying money etc at your regional passport office. Saves lot of time. Advantages of Applying For Passport Online Ask anyone who already obtained a passport by visiting the passport office, they will narrate stories of spending long time in queues. In certain office, the length of queues may require you to stand 3 to 4 hours. And sometimes by the time your turn comes, the officers may break for lunch, coffee or the day if your time is very bad. The main advantage of applying for passport using this online portal is – we can skip the process of standing in long queues to obtain tokens for submitting tokens and also we get a pre booked appointment with passport issuing officer for submitting the proofs and paying fees. When you submit the application online, an appointment will be booked automatically for submitting the required documents and fees so that you can just walk-in to passport office 15 minutes ahead of your appointment. List Of Passport Offices Accepting Online Application Forms I know that you are excited and all set to apply online, but hold on. The online Passport application submission is supported in 37 regional passport offices across India as I write this post. If you are residing in any of these cities, then only you can apply online – Ahemdabad, Amritsar, Bareilly, Bhopal, Bhubneswar, Chennai, Cochin, Coimbatore, Dehradun, Delhi, Ghaziabad, Guwahati, Hyderabad, Jaipur, Jalandhar, Jammu, Kolkata, Kozhikode, Lucknow, Madurai, Malappuram, Mumbai, Nagpur, Panaji, Patna, Pune, Raipur, Ranchi, Shimla, Srinagar, Surat, Thane, Trichy, Trivandrum, Visakhapatnam. Others should approach the passport office directly. Government is trying to expand this to other locations, so please check if place accepting online registration by visiting registration page(link given below). Types Of Applications Accepted Online The online system accepts following types of passport applications Fresh Passport / Renewal New Passport in lieu of Damaged/Lost Passport Passport for Children up to 15 Years of Age Re-issue of Passport / Additional Booklet Indian Govt. Passport Office Website And Online Application URL To apply for passport online visit the url https://passport.gov.in/pms/Information.jsp using Internet Explorer browser. This site may not work on your Firefox, Chrome or other browsers as the site request users to use Internet Explorer. Here are few other links that will help you get more details on passport application Govt. Of India Passport Office Website Passport Application Fee Structure Information Passport Application Filling Guidelines Passport Application Check List URL For NRIs To Apply Online If you are an NRI then the above links and the list of supported Passport offices are not for you. NRIs should use the URL http://passport.gov.in/nri/OnlineRegistration.jsp for applying passport related services online. For more details you can visit special NRI section on Passport website. CC Image credit: LucasTheExperience This article titled,How To Apply Online For New Passport Or Renewal Of Your Passport [Indian Websites], was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

Read the article

Distinctly LINQ – Getting a Distinct List of Objects

- by David Totzke

Let’s say that you have a list of objects that contains duplicate items and you want to extract a subset of distinct items. This is pretty straight forward in the trivial case where the duplicate objects are considered the same such as in the following example: List<int> ages = new List<int> { 21, 46, 46, 55, 17, 21, 55, 55 }; IEnumerable<int> distinctAges = ages.Distinct(); Console.WriteLine("Distinct ages:"); foreach (int age in distinctAges) { Console.WriteLine(age); } /* This code produces the following output: Distinct ages: 21 46 55 17 */ What if you are working with reference types instead? Imagine a list of search results where items in the results, while unique in and of themselves, also point to a parent. We’d like to be able to select a bunch of items in the list but then see only a distinct list of parents. Distinct isn’t going to help us much on its own as all of the items are distinct already. Perhaps we can create a class with just the information we are interested in like the Id and Name of the parents. public class SelectedItem { public int ItemID { get; set; } public string DisplayName { get; set; } } We can then use LINQ to populate a list containing objects with just the information we are interested in and then get rid of the duplicates. IEnumerable<SelectedItem> list = (from item in ResultView.SelectedRows.OfType<Contract.ReceiptSelectResults>() select new SelectedItem { ItemID = item.ParentId, DisplayName = item.ParentName }) .Distinct(); Most of you will have guessed that this didn’t work. Even though some of our objects are now duplicates, because we are working with reference types, it doesn’t matter that their properties are the same, they’re still considered unique. What we need is a way to define equality for the Distinct() extension method. IEqualityComparer<T> Looking at the Distinct method we see that there is an overload that accepts an IEqualityComparer<T>. We can simply create a class that implements this interface and that allows us to define equality for our SelectedItem class. public class SelectedItemComparer : IEqualityComparer<SelectedItem> { public new bool Equals(SelectedItem abc, SelectedItem def) { return abc.ItemID == def.ItemID && abc.DisplayName == def.DisplayName; } public int GetHashCode(SelectedItem obj) { string code = obj.DisplayName + obj.ItemID.ToString(); return code.GetHashCode(); } } In the Equals method we simply do whatever comparisons are necessary to determine equality and then return true or false. Take note of the implementation of the GetHashCode method. GetHashCode must return the same value for two different objects if our Equals method says they are equal. Get this wrong and your comparer won’t work . Even though the Equals method returns true, mismatched hash codes will cause the comparison to fail. For our example, we simply build a string from the properties of the object and then call GetHashCode() on that. Now all we have to do is pass an instance of our IEqualitlyComarer<T> to Distinct and all will be well: IEnumerable<SelectedItem> list = (from item in ResultView.SelectedRows.OfType<Contract.ReceiptSelectResults>() select new SelectedItem { ItemID = item.dahfkp, DisplayName = item.document_code }) .Distinct(new SelectedItemComparer()); Enjoy. Dave Just because I can… Technorati Tags: LINQ,C#

Read the article

Ubuntu 12.04 patched b43 driver compilation error

- by Zed

I tried this How do I install this patched b43 driver? guide to install patched b43 driver on Ubuntu 12.04 with 3.2.0-31-generic kernel but I can't pass compilation phase.Here is what I did: wget http://www.orbit-lab.org/kernel/compat-wireless-3-stable/v3.1/compat-wireless-3.1.1-1.tar.bz2 cd compat-wireless-3.1.1-1/ scripts/driver-select b43 make make -C /lib/modules/3.2.0-31-generic/build M=/home/marco/compat-wireless-3.1.1-1 modules make[1]: Entering directory `/usr/src/linux-headers-3.2.0-31-generic' CC [M] /home/marco/compat-wireless-3.1.1-1/compat/main.o In file included from /home/marco/compat-wireless-3.1.1-1/include/linux/compat-2.6.29.h:5:0, from /home/marco/compat-wireless-3.1.1-1/include/linux/compat-2.6.h:24, from <command-line>:0: include/linux/netdevice.h:1153:5: warning: "IS_ENABLED" is not defined [-Wundef] include/linux/netdevice.h:1153:15: error: missing binary operator before token "(" include/linux/netdevice.h: In function ‘netdev_uses_dsa_tags’: include/linux/netdevice.h:1421:9: error: ‘struct net_device’ has no member named ‘dsa_ptr’ include/linux/netdevice.h:1422:31: error: ‘struct net_device’ has no member named ‘dsa_ptr’ include/linux/netdevice.h: In function ‘netdev_uses_trailer_tags’: include/linux/netdevice.h:1431:9: error: ‘struct net_device’ has no member named ‘dsa_ptr’ include/linux/netdevice.h:1432:35: error: ‘struct net_device’ has no member named ‘dsa_ptr’ make[3]: *** [/home/marco/compat-wireless-3.1.1-1/compat/main.o] Error 1 make[2]: *** [/home/marco/compat-wireless-3.1.1-1/compat] Error 2 make[1]: *** [_module_/home/marco/compat-wireless-3.1.1-1] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-3.2.0-31-generic' make: *** [modules] Error 2 To fix that error I added #include <linux/kconfig.h> to /usr/src/linux-headers-3.2.0-31-generic/include/linux/netdevice.h but now I'm getting something else make make -C /lib/modules/3.2.0-31-generic/build M=/home/marco/compat-wireless-3.1.1-1 modules make[1]: Entering directory `/usr/src/linux-headers-3.2.0-31-generic' CC [M] /home/marco/compat-wireless-3.1.1-1/compat/main.o LD [M] /home/marco/compat-wireless-3.1.1-1/compat/compat.o CC [M] /home/marco/compat-wireless-3.1.1-1/drivers/bcma/main.o In file included from /home/marco/compat-wireless-3.1.1-1/include/linux/bcma/bcma.h:9:0, from /home/marco/compat-wireless-3.1.1-1/drivers/bcma/bcma_private.h:8, from /home/marco/compat-wireless-3.1.1-1/drivers/bcma/main.c:8: /home/marco/compat-wireless-3.1.1-1/include/linux/ssb/ssb.h: In function ‘ssb_driver_register’: /home/marco/compat-wireless-3.1.1-1/include/linux/ssb/ssb.h:236:36: error: ‘THIS_MODULE’ undeclared (first use in this function) /home/marco/compat-wireless-3.1.1-1/include/linux/ssb/ssb.h:236:36: note: each undeclared identifier is reported only once for each function it appears in In file included from /home/marco/compat-wireless-3.1.1-1/drivers/bcma/bcma_private.h:8:0, from /home/marco/compat-wireless-3.1.1-1/drivers/bcma/main.c:8: /home/marco/compat-wireless-3.1.1-1/include/linux/bcma/bcma.h: In function ‘bcma_driver_register’: /home/marco/compat-wireless-3.1.1-1/include/linux/bcma/bcma.h:170:37: error: ‘THIS_MODULE’ undeclared (first use in this function) /home/marco/compat-wireless-3.1.1-1/drivers/bcma/main.c: At top level: /home/marco/compat-wireless-3.1.1-1/drivers/bcma/main.c:12:20: error: expected declaration specifiers or ‘...’ before string constant /home/marco/compat-wireless-3.1.1-1/drivers/bcma/main.c:13:16: error: expected declaration specifiers or ‘...’ before string constant /home/marco/compat-wireless-3.1.1-1/drivers/bcma/main.c:182:1: warning: data definition has no type or storage class [enabled by default] /home/marco/compat-wireless-3.1.1-1/drivers/bcma/main.c:182:1: warning: type defaults to ‘int’ in declaration of ‘EXPORT_SYMBOL_GPL’ [-Wimplicit-int] /home/marco/compat-wireless-3.1.1-1/drivers/bcma/main.c:182:1: warning: parameter names (without types) in function declaration [enabled by default] /home/marco/compat-wireless-3.1.1-1/drivers/bcma/main.c:188:1: warning: data definition has no type or storage class [enabled by default] /home/marco/compat-wireless-3.1.1-1/drivers/bcma/main.c:188:1: warning: type defaults to ‘int’ in declaration of ‘EXPORT_SYMBOL_GPL’ [-Wimplicit-int] /home/marco/compat-wireless-3.1.1-1/drivers/bcma/main.c:188:1: warning: parameter names (without types) in function declaration [enabled by default] make[3]: *** [/home/marco/compat-wireless-3.1.1-1/drivers/bcma/main.o] Error 1 make[2]: *** [/home/marco/compat-wireless-3.1.1-1/drivers/bcma] Error 2 make[1]: *** [_module_/home/marco/compat-wireless-3.1.1-1] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-3.2.0-31-generic' make: *** [modules] Error 2 Any suggestion what to try next?

Read the article

WIF, ADFS 2 and WCF–Part 4: Service Client (using Service Metadata)

- by Your DisplayName here!

See parts 1, 2 and 3 first. In this part we will finally build a client for our federated service. There are basically two ways to accomplish this. You can use the WCF built-in tooling to generate client and configuration via the service metadata (aka ‘Add Service Reference’). This requires no WIF on the client side. Another approach would be to use WIF’s WSTrustChannelFactory to manually talk to the ADFS 2 WS-Trust endpoints. This option gives you more flexibility, but is slightly more code to write. You also need WIF on the client which implies that you need to run on a WIF supported operating system – this rules out e.g. Windows XP clients. We’ll start with the metadata way. You simply create a new client project (e.g. a console app) – call ‘Add Service Reference’ and point the dialog to your service endpoint. What will happen then is, that VS will contact your service and read its metadata. Inside there is also a link to the metadata endpoint of ADFS 2. This one will be contacted next to find out which WS-Trust endpoints are available. The end result will be a client side proxy and a configuration file. Let’s first write some code to call the service and then have a closer look at the config file. var proxy = new ServiceClient(); proxy.GetClaims().ForEach(c => Console.WriteLine("{0}\n {1}\n {2} ({3})\n", c.ClaimType, c.Value, c.Issuer, c.OriginalIssuer)); That’s all. The magic is happening in the configuration file. When you in inspect app.config, you can see the following general configuration hierarchy: <client /> element with service endpoint information federation binding and configuration containing ADFS 2 endpoint 1 (with binding and configuration) ADFS 2 endpoint n (with binding and configuration) (where ADFS 2 endpoint 1…n are the endpoints I talked about in part 1) You will see a number of <issuer /> elements in the binding configuration where simply the first endpoint from the ADFS 2 metadata becomes the default endpoint and all other endpoints and their configuration are commented out. You now need to find the endpoint you want to use (based on trust version, credential type and security mode) and replace that with the default endpoint. That’s it. When you call the WCF proxy, it will inspect configuration, then first contact the selected ADFS 2 endpoint to request a token. This token will then be used to authenticate against the service. In the next post I will show you the more manual approach using the WIF APIs.

Read the article

Exploring packages in code

In my previous post Searching for tasks with code you can see how to explore the control flow side of packages, drilling down through containers, task, and event handlers, but it didn’t cover the data flow. I recently saw a post on the MSDN forum asking how to edit an existing package programmatically, and the sticking point was how to find the the data flow and the components inside. This post builds on some of the previous code and shows how you can explore all objects inside a package. I took the sample Task Search application I’d written previously, and came up with a totally pointless little console application that just walks through the package and writes out the basic type and name of every object it finds, starting with the package itself e.g. Package – MyPackage . The sample package we used last time showed nested objects as well an event handler; a OnPreExecute event tucked away on the task SQL In FEL. The output of this sample tool would look like this: PackageObjects v1.0.0.0 (1.0.0.26627) Copyright (C) 2009 Konesans Ltd Processing File - Z:\Users\Darren Green\Documents\Visual Studio 2005\Projects\SSISTestProject\EventsAndContainersWithExe cSQLForSearch.dtsx Package - EventsAndContainersWithExecSQLForSearch For Loop - FOR Counter Loop Task - SQL In Counter Loop Sequence Container - SEQ For Each Loop Wrapper For Each Loop - FEL Simple Loop Task - SQL In FEL Task - SQL On Pre Execute for FEL SQL Task Sequence Container - SEQ Top Level Sequence Container - SEQ Nested Lvl 1 Sequence Container - SEQ Nested Lvl 2 Task - SQL In Nested Lvl 2 Task - SQL In Nested Lvl 1 #1 Task - SQL In Nested Lvl 1 #2 Connection Manager – LocalHost The code is very similar to what we had previously, but there are a couple of extra bits to deal with connections and to look more closely at a task and see if it is a Data Flow task. For connections your just examine the package's Connections collection as shown in the abridged snippets below. First you can see the call to the ProcessConnections method, followed by the method itself. // Load the package file Application application = new Application(); using (Package package = application.LoadPackage(filename, null)) { // Write out the package name Console.WriteLine("Package - {0}", package.Name); ... More ... // Look and the connections ProcessConnections(package.Connections); } private static void ProcessConnections(Connections connections) { foreach (ConnectionManager connectionManager in connections) { Console.WriteLine("Connection Manager - {0}", connectionManager.Name); } } What we didn’t see in the sample output above was anything to do with the Data Flow, but rest assured the code now handles it too. The following snippet shows how each task is examined to see if it is a Data Flow task, and if so we can then loop through all of the components inside the data flow. private static void ProcessTaskHost(TaskHost taskHost) { if (taskHost == null) { return; } Console.WriteLine("Task - {0}", taskHost.Name); // Check if the task is a Data Flow task MainPipe pipeline = taskHost.InnerObject as MainPipe; if (pipeline != null) { ProcessPipeline(pipeline); } } private static void ProcessPipeline(MainPipe pipeline) { foreach (IDTSComponentMetaData90 componentMetadata in pipeline.ComponentMetaDataCollection) { Console.WriteLine("Pipeline Component - {0}", componentMetadata.Name); // If you wish to make changes to the component then you should really use the managed wrapper. // CManagedComponentWrapper wrapper = componentMetadata.Instantiate(); // wrapper.SetComponentProperty("PropertyName", "Value"); } } Hopefully you can see how we get a reference to the Data Flow task, and then use the ComponentMetaDataCollection to find out what components we have inside the pipeline. If you wanted to know more about the component you could look at the ObjectType or ComponentClassID properties. After that it gets a bit harder and you should get a reference to the wrapper object as the comment suggest and start using the properties, just like you would in the create packages samples, see our Code Development category for some for these examples. Download Sample code project PackageObjects.zip (5KB)

Read the article

Principles of Big Data By Jules J Berman, O’Reilly Media Book Review

- by Compudicted

Originally posted on: http://geekswithblogs.net/Compudicted/archive/2013/11/04/principles-of-big-data-by-jules-j-berman-orsquoreilly-media.aspx A fantastic book! Must be part, if not yet, of the fundamentals of the Big Data as a field of science. Highly recommend to those who are into the Big Data practice. Yet, I confess this book is one of my best reads this year and for a number of reasons: The book is full of wisdom, intimate insight, historical facts and real life examples to how Big Data projects get conceived, operate and sadly, yes, sometimes die. But not only that, the book is most importantly is filled with valuable advice, accurate and even overwhelming amount of reference (from the positive side), and the author does not event stop there: there are numerous technical excerpts, links and examples allowing to quickly accomplish many daunting tasks or make you aware of what one needs to perform as a data practitioner (excuse my use of the word practitioner, I just did not find a better substitute to it to trying to reference all who face Big Data). Be aware that Jules Berman’s background is in medicine, naturally, this book discusses this subject a lot as it is very dear to the author’s heart I believe, this does not make this book any less significant however, quite the opposite, I trust if there is an area in science or practice where the biggest benefits can be ripped from Big Data projects it is indeed the medical science, let’s make Cancer history! On a personal note, for me as a database, BI professional it has helped to understand better the motives behind Big Data initiatives, their underwater rivers and high altitude winds that divert or propel them forward. Additionally, I was impressed by the depth and number of mining algorithms covered in it. I must tell this made me very curious and tempting to find out more about these indispensable attributes of Big Data so sure I will be trying stretching my wallet to acquire several books that go more in depth on several most popular of them. My favorite parts of the book, well, all of them actually, but especially chapter 9: Analysis, it is just very close to my heart. But the real reason is it let me see what I do with data from a different angle. And then the next - “Special Considerations”, they are just two logical parts. The writing language is of this book is very acceptable for all levels, I had no technical problem reading it in ebook format on my 8” tablet or a large screen monitor. If I would be asked to say at least something negative I have to state I had a feeling initially that the book’s first part reads like an academic material relaxing the reader as the book progresses forward. I admit I am impressed with Jules’ abilities to use several programming languages and OSS tools, bravo! And I agree, it is not too, too hard to grasp at least the principals of a modern programming language, which seems becomes a defacto knowledge standard item for any modern human being. So grab a copy of this book, read it end to end and make yourself shielded from making mistakes at any stage of your Big Data initiative, by the way this book also helps build better future Big Data projects. Disclaimer: I received a free electronic copy of this book as part of the O'Reilly Blogger Program.

Read the article

Creating typed WSDL’s for generic WCF services of the ESB Toolkit

- by charlie.mott

source: http://geekswithblogs.net/charliemott Question How do you make it easy for client systems to consume the generic WCF services exposed by the ESB Toolkit using messages that conform to agreed schemas\contracts? Usually the developer of a system consuming a web service adds a service reference using a WSDL. However, the WSDL’s for the generic services exposed by the ESB Toolkit do not make it easy to develop clients that conform to agreed schemas\contracts. Recommendation Take a copy of the generic WSDL’s and modify it to use the proper contracts. This is very easy. It will work with the generic on ramps so long as the <part>?</part> wrapping is removed from the WCF adapter configuration in the BizTalk receive locations. Attempting to create a WSDL where the input and output messages are sent/returned with a <part> wrapper is a nightmare. I have not managed it. Consequences I can only see the following consequences of removing the <part> wrapper: ESB Test Client – I needed to modify the out-of-the-box ESB Test Client source code to make it send non-wrapped messages. Flat file formatted messages – the endpoint will no longer support flat file message formats. However, even if you needed to support this integration pattern through WCF, you would most-likely want to create a separate receive location anyway with its’ own independently configured XML disassembler pipeline component. Instructions These steps show how to implement a request-response implementation of this. WCF Receive Locations In BizTalk, for the WCF receive location for the ESB on-ramp, set the adapter Message settings\bindings to “UseBodyPath”: Inbound BizTalk message body = Body Outbound WCF message body = Body Create a WSDL’s for each supported integration use-case Save a copy of the WSDL for the WCF generic receive location above that you intend the client system to use. Give it a name that mirrors the interface agreement (e.g. Esb_SuppliersSearchCommand_wsHttpBinding.wsdl). Add any xsd schemas files imported below to this same folder. Edit the WSDL to import schemas For example, this: <xsd:schema targetNamespace=http://microsoft.practices.esb/Imports /> … would become something like: <xsd:schema targetNamespace="http://microsoft.practices.esb/Imports"> <xsd:import schemaLocation="SupplierSearchCommand_V1.xsd" namespace="http://schemas.acme.co.uk/suppliersearchcommand/1.0"/> <xsd:import schemaLocation="SuppliersDocument_V1.xsd" namespace="http://schemas.acme.co.uk/suppliersdocument/1.0"/> <xsd:import schemaLocation="Types\Supplier_V1.xsd" namespace="http://schemas.acme.co.uk/types/supplier/1.0"/> <xsd:import schemaLocation="GovTalk\bs7666-v2-0.xsd" namespace="http://www.govtalk.gov.uk/people/bs7666"/> <xsd:import schemaLocation="GovTalk\CommonSimpleTypes-v1-3.xsd" namespace="http://www.govtalk.gov.uk/core"/> <xsd:import schemaLocation="GovTalk\AddressTypes-v2-0.xsd" namespace="http://www.govtalk.gov.uk/people/AddressAndPersonalDetails"/> </xsd:schema> Modify the Input and Output message For example, this: <wsdl:message name="ProcessRequestResponse_SubmitRequestResponse_InputMessage"> <wsdl:part name="part" type="xsd:anyType"/> </wsdl:message> <wsdl:message name="ProcessRequestResponse_SubmitRequestResponse_OutputMessage"> <wsdl:part name="part" type="xsd:anyType"/> </wsdl:message> … would become something like: <wsdl:message name="ProcessRequestResponse_SubmitRequestResponse_InputMessage"> <wsdl:part name="part" element="ssc:SupplierSearchEvent" xmlns:ssc="http://schemas.acme.co.uk/suppliersearchcommand/1.0" /> </wsdl:message> <wsdl:message name="ProcessRequestResponse_SubmitRequestResponse_OutputMessage"> <wsdl:part name="part" element="sd:SuppliersDocument" xmlns:sd="http://schemas.acme.co.uk/suppliersdocument/1.0"/> </wsdl:message> This WSDL can now be added as a service reference in client solutions.

Read the article

Throttling in OSB

- by Knut Vatsendvik

Technorati Tags: soa,integration,osb,throttling,overload protection A common problem with integration is the risk of overloading a particular web service. When the capacity of a web service is reached and it continues to accept connections, it will most likely start to deteriorate. Fortunately there are 2 techniques, with Oracle Service Bus, that you can apply for protecting this from happening. You can either limit the concurrent number of requests for a Business Service (outbound requests) or you can limit the number of threads processing the requests for a Proxy Service (inbound requests). Limiting the Concurrent Number of Requests Limiting the concurrent requests for a Business Service cannot be set at design time so you have to use the built-in Oracle Service Bus Administration Console to do it (/sbconsole). Follow these steps to enable it: In Change Center, click Create to start a new Session Select Project Explorer, and navigate to the Business Service you want to limit Select the Operational Settings tab of the View a Business Service page In this tab, under Throttling, select the Enable check box. By enabling throttling you Specify a value for Maximum Concurrency Specify a positive integer value for Throttling Queue to backlog messages that has exceeded the message concurrency limit Specify the maximum time in milliseconds for Message Expiration a message can spend in Throttling Queue Click Update Click Active in Change Center to active the new settings If you re-publish the service, it will not overwrite the settings. Only if the resource is renamed or moved, it will. Please note that a throttling queue is an in-memory queue. Messages that are placed in this queue are not recoverable when a server fails or when you restart a server. Limiting the Number of Threads A better approach, in my opinion, is to limit the number of threads that can work with request. Follow these steps to do it: Open the WebLogic Server Console (/console) In Change Center, click Create to start a new Session In the left pane expand Environment and select Work Managers In the Global Work Managers page, click New Click the Work Manager radio button, then click Next Enter a Name for the new Work Manager, and click Next In the Available Targets list, select server instances or clusters on which you will deploy applications that reference the Work Manager Click Finish. The new Work Manager now appears in the Global Work Managers page. Select the new Work Manager Right next to the Maximum Threads Constraint drop-down box, click New Click the Maximum Threads Constraint radio button, then click Next Enter a Name and a thread Count to be the maximum size to allocate for requests. Click Next In the Available Targets list, select server instances or clusters on which you will deploy applications that reference the Work Manager Click Finish Click Save Click Active in Change Center to active your changes. A restart may be necessary. Puh! Almost there. Start a new session. Go to the Service Bus Console (/sbconsole) and find your consuming Proxy Service. Click the Edit button of the Transport Configuration tab. Click Next Set the Dispatch Policy to the new Work Manager Click Last Click Save Click Active in Change Center to active your changes.

Read the article

Software development stack 2012

A couple of months ago, I posted on Google+ about my evaluation period for a new software development stack in general. "Analysing existing 'jungle' of multiple applications and tools in various languages for clarification and future design decisions. Great fun and lots of headaches... #DevelopersLife" Surprisingly, there was response... ;-) - And this series of articles is initiated by this post. Thanks Olaf. The past few years... Well, after all my first choice of software development in the past was Microsoft Visual FoxPro 6.0 - 9.0 in combination with Microsoft SQL Server 2000 - 2008 and Crystal Reports 9.x - XI. Honestly, it is my main working environment due to exisiting maintenance and support plans with my customers, but also for new project requests. And... hands on, it is still my first choice for data manipulation and migration options. But the earth is spinning, and as a software craftsman one has to be flexible with the choice of tools. In parallel to my knowledge and expertise in the above mentioned tools, I already started very early to get my hands dirty with the Microsoft .NET Framework. If I remember correctly, I started back in 2002/2003 with the first version ever. But this was more out of curiousity. During the years this kind of development got more serious and demanding, and I focused myself on interop and integrational libraries and applications. Mainly, to expose exisitng features of the .NET Framework to Visual FoxPro - I even had a session about that at the German Developer's Conference in Frankfurt. Observation of recent developments With the recent hype on Javascript and HTML5, especially for Windows 8 and Windows Phone 8 development, I had several 'Deja vu' events... Back in early 2006 (roughly) I had a conversation on the future of Web and Desktop development with my former colleagues Golo Roden and Thomas Wilting about the underestimation of Javascript and its root as a prototype-based, dynamic, full-featured programming language. During this talk with them I took the Mozilla applications, namely Firefox and Thunderbird, as a reference which are mainly based on XML, CSS, Javascript and images - besides the core rendering engine. And that it is very simple to write your own extensions for the Gecko rendering engine. Looking at the Windows Vista Sidebar widgets, just underlines this kind of usage. So, yes the 'Modern UI' of Windows 8 based on HTML5, CSS3 and Javascript didn't come as any surprise to me. Just allow me to ask why did it take so long for Microsoft to come up with this step? A new set of tools Ok, coming from web development in HTML 4, CSS and Javascript prior to Visual FoxPro, I am partly going back to that combination of technologies. What is the other part of the software development stack here at IOS Indian Ocean Software Ltd? Frankly, it is easy and straight forward to describe: Microsoft Visual FoxPro 9.0 SP 2 - still going strong! Visual Studio 2012 (C# on latest .NET Framework) MonoDevelop Telerik DevCraft Suite WPF ASP.NET MVC Windows 8 Kendo UI OpenAccess ORM Reporting JustCode CODE Framework by EPS Software MonoTouch and Mono for Android Subversion and additional tools for the daily routine: Notepad++, JustCode, SQL Compare, DiffMerge, VMware, etc. Following the principles of Clean Code Developer and the Agile Manifesto Actually, nothing special about this combination but rather a solid fundament to work with and create line of business applications for customers.Honestly, I am really interested in your choice of 'weapons' for software development, and hopefully there might be some nice conversations in the comment section. Over the next coming days/weeks I'm going to describe a little bit more in detail about the reasons for my decision. Articles will be added bit by bit here as reference, too. Please bear with me... Regards, JoKi

Read the article

What's new in ASP.Net 4.5 and VS 2012 - part 2

- by nikolaosk

This is the second post in a series of posts titled "What's new in ASP.Net 4.5 and VS 2012".You can have a look at the first post in this series, here. Please find all my posts regarding VS 2012, here. In this post I will be looking into the various new features available in ASP.Net 4.5 and VS 2012.I will be looking into the enhancements in the HTML Editor,CSS Editor and Javascript Editor.In order to follow along this post you must have Visual Studio 2012 and .Net Framework 4.5 installed in your machine.Download and install VS 2012 using this link.My machine runs on Windows 8 and Visual Studio 2012 works just fine.I will work fine in Windows 7 as well so do not worry if you do not have the latest Microsoft operating system.1) Launch VS 2012 and create a new Web Forms application by going to File - >New Web Site - > ASP.Net Web Forms Site.2) Choose an appropriate name for your web site.3) I would like to point out the new enhancements in the CSS editor in VS 2012. In the Solution Explorer in the Content folder and open the Site.cssThen when I try to change the background-color property of the html element, I get a brand new handy color-picker. Have a look at the picture below Please note that the color-picker shows all the colors that have been used in this website. Then you can expand the color-picker by clicking on the arrows. Opacity is also supported. Have a look at the picture below4) There are also mobile styles in the Site.css .These are based on media queries.Please have a look at another post of mine on CSS3 media queries. Have a look at the picture below In this case when the maximum width of the screen is less than 850px there will be a new layout that will be dictated by these new rules. Also CSS snippets are supported. Have a look at the picture below I am writing a new CSS rule for an image element. I write the property transform and hit tab and then I have cross-browser CSS handling all of the major vendors.Then I simply add the value rotate and it is applied to all the cross browser options.Have a look at the picture below. I am sure you realise how productive you can become with all these CSS snippets. 5) Now let's have a look at the new HTML editor enhancements in VS 2012You can drag and drop a GridView web server control from the Toolbox in the Site.master file.You will see a smart tag (that was only available in the Design View) that you can expand and add fields, format the web server control.Have a look at the picture below 6) We also have available code snippets. I type <video and then press tab twice.By doing that I have the rest of the HTML 5 markup completed.Have a look at the picture below 7) I have new support for the input tag including all the HTML 5 types and all the new accessibility features.Have a look at the picture below 8) Another interesting feature is the new Intellisense capabilities. When I change the DocType to 4.01 and the type <audio>,<video> HTML 5 tags, Intellisense does not recognise them and add squiggly lines.Have a look at the picture below All these features support ASP.Net Web forms, ASP.Net MVC applications and Web Pages. 9) Finally I would like to show you the enhanced support that we have for Javascript in VS 2012. I have full Intellisense support and code snippets support.I create a sample javascript file. I type If and press tab. I type while and press tab.I type for and press tab.In all three cases code snippet support kicks in and completes the code stack. Have a look at the picture below We also have full Intellisense support.Have a look at the picture below I am creating a simple function and then type some sort of XML like comments for the input parameters. Have a look at the picture below. Then when I call this function, Intellisense has picked up the XML comments and shows the variables data types.Have a look at the picture below Hope it helps!!!

Read the article

Do NOT Change "Copy Local” project references to false, unless understand subsequences.

- by Michael Freidgeim

To optimize performance of visual studio build I've found multiple recommendations to change CopyLocal property for dependent dlls to false,e.g. From http://stackoverflow.com/questions/690033/best-practices-for-large-solutions-in-visual-studio-2008 CopyLocal? For sure turn this offhttp://stackoverflow.com/questions/280751/what-is-the-best-practice-for-copy-local-and-with-project-referencesAlways set the Copy Local property to false and enforce this via a custom msbuild stephttp://codebetter.com/patricksmacchia/2007/06/20/benefit-from-the-c-and-vb-net-compilers-perf/BenefitBenefitMy advice is to always set ‘Copy Local’ to falseSome time ago we've tried to change the setting to false, and found that it causes problem for deployment of top-level projects.Recently I've followed the suggestion and changed the settings for middle-level projects. It didn't cause immediate issues, but I was warned by Readify Consultant Colin Savage about possible errors during deploymentsI haven't undone the changes immediately and we found a few issues during testing.There are many scenarios, when you need to have Copy Local’ left to True.The concerns are highlighted in some stack overflow answers, but they have small number of votes.Top-level projects: set copy local = true.First of all, it doesn't work correctly for top-level projects, i.e. executables or web sites.As pointed in the answer http://stackoverflow.com/a/6529461/52277for all the references in the one at the top set copy local = true.Alternatively you have to change output directory as it's described in http://www.simple-talk.com/dotnet/.net-framework/partitioning-your-code-base-through-.net-assemblies-and-visual-studio-projects/If you set ‘ Copy Local = false’, VS will, unless you tell it otherwise, place each assembly alone in its own .\bin\Debugdirectory. Because of this, you will need to configure VS to place assemblies together in the same directory. To do so, for each VS project, go to VS > Project Properties > Build tab > Output path, and set the Ouput path to ..\bin\Debugfor debug configuration, and ..\bin\Release for release configuration.Second-level dependencies: set copy local = true.Another example when copylocal =false fails on run-time, is when top level assembly doesn't directly referenced one of indirect dependencies.E..g. Top-level assembly A has reference to assembly B with copylocal =true, but assembly B has reference to assembly C with copylocal =false. Most likely assembly C will be missing on runtime and will cause errors E.g. http://stackoverflow.com/questions/602765/when-should-copy-local-be-set-to-true-and-when-should-it-not?lq=1Copy local is important for deployment scenarios and tools. As a general rule you should use CopyLocal=True and http://stackoverflow.com/questions/602765/when-should-copy-local-be-set-to-true-and-when-should-it-not?lq=1 Unfortunately there are some quirks and CopyLocal won't necessary work as expected for assembly references in secondary assemblies structured as shown below.MainApp.exe MyLibrary.dll ThirdPartyLibrary.dll (if in the GAC CopyLocal won't copy to MainApp bin folder)This makes xcopy deployments difficult . .Reflection called DLLs dependencies: set copy local = true.E.g user can see error "ISystem.Reflection.ReflectionTypeLoadException: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information."The fix for the issue is recommended in http://stackoverflow.com/a/6200173/52277"I solved this issue by setting the Copy Local attribute of my project's references to true."In general, the problems with investigation of deployment issues may overweight the benefits of reduced build time. Setting the Copy Local to false without considering deployment issues is not a good idea.

Read the article

Time to stop using “Execute Package Task”– a way to execute package in SSIS catalog taking advantage of the new project deployment model ,and the logging and reporting feature

- by Kevin Shyr

I set out to find a way to dynamically call package in SSIS 2012. The following are 2 excellent blogs I found; I used them heavily. The code below has some addition to parameter types and message types, but was made essentially derived entirely from the blogs. http://sqlblog.com/blogs/jamie_thomson/archive/2011/07/16/ssis-logging-in-denali.aspx http://www.ssistalk.com/2012/07/24/quick-tip-run-ssis-2012-packages-synchronously-and-other-execution-options/ The code: Every package will be called by a PackageController package. The packageController is initialized with some information on which package to run and what information to pass in. The following is the stored procedure called from the “Execute SQL Task”. Here is the highlight of the stored procedure It takes in packageName, project name, and folder name (folder in SSIS project deployment to SSIS catalog) The stored procedure sets the package variables of the upcoming package execution Execute package in SSIS Catalog Get the status of the execution. Also, if exists, get the error message’s message_id and store them in the management database. Return value to “Execute SQL Task” to manage failure properly CREATE PROCEDURE [AUDIT].[LaunchPackageExecutionInSSISCatalog] @PackageName NVARCHAR(255) , @ProjectFolder NVARCHAR(255) , @ProjectName NVARCHAR(255) , @AuditKey INT , @DisableNotification BIT , @PackageExecutionLogID INT AS BEGIN TRY DECLARE @execution_id BIGINT = 0; -- Create a package execution EXEC [SSISDB].[catalog].[create_execution] @package_name=@PackageName, @execution_id=@execution_id OUTPUT, @folder_name=@ProjectFolder, @project_name=@ProjectName, @use32bitruntime=False; UPDATE [AUDIT].[PackageInstanceExecutionLog] WITH(ROWLOCK) SET [SSISCatalogExecutionID] = @execution_id WHERE [PackageInstanceExecutionLogID] = @PackageExecutionLogID -- this is to set the execution synchronized so that I can check the result in the end EXEC [SSISDB].[catalog].[set_execution_parameter_value] @execution_id, @object_type=50, @parameter_name=N'SYNCHRONIZED', @parameter_value=1; -- true /******************************************************** ******************************************************** Section: setting parameters Source table: SSISDB.internal.object_parameters object_type list: 20: project level variables 30: package level variables 50: execution parameter ******************************************************** ********************************************************/ EXEC [SSISDB].[catalog].[set_execution_parameter_value] @execution_id, @object_type=30, @parameter_name=N'FromParent_AuditKey', @parameter_value=@AuditKey; -- true EXEC [SSISDB].[catalog].[set_execution_parameter_value] @execution_id, @object_type=30, @parameter_name=N'FromParent_DisableNotification', @parameter_value=@DisableNotification; -- true EXEC [SSISDB].[catalog].[set_execution_parameter_value] @execution_id, @object_type=30, @parameter_name=N'FromParent_PackageInstanceExecutionID', @parameter_value=@PackageExecutionLogID; -- true /******************************************************** ******************************************************** Section: setting variables END ******************************************************** ********************************************************/ /* This section is carried over from example code I don't see a reason to change them yet */ -- Set our package parameters EXEC [SSISDB].[catalog].[set_execution_parameter_value] @execution_id, @object_type=50, @parameter_name=N'DUMP_ON_EVENT', @parameter_value=1; -- true EXEC [SSISDB].[catalog].[set_execution_parameter_value] @execution_id, @object_type=50, @parameter_name=N'DUMP_EVENT_CODE', @parameter_value=N'0x80040E4D;0x80004005'; EXEC [SSISDB].[catalog].[set_execution_parameter_value] @execution_id, @object_type=50, @parameter_name=N'LOGGING_LEVEL', @parameter_value= 1; -- Basic EXEC [SSISDB].[catalog].[set_execution_parameter_value] @execution_id, @object_type=50, @parameter_name=N'DUMP_ON_ERROR', @parameter_value=1; -- true /******************************************************** ******************************************************** Section: EXECUTING ******************************************************** ********************************************************/ EXEC [SSISDB].[catalog].[start_execution] @execution_id; /******************************************************** ******************************************************** Section: EXECUTING END ******************************************************** ********************************************************/ /******************************************************** ******************************************************** Section: checking execution result Source table: [SSISDB].[catalog].[executions] status: 1: created 2: running 3: cancelled 4: failed 5: pending 6: ended unexpectedly 7: succeeded 8: stopping 9: completed ******************************************************** ********************************************************/ if EXISTS(SELECT TOP 1 1 FROM [SSISDB].[catalog].[executions] WITH(NOLOCK) WHERE [execution_id] = @execution_id AND [status] NOT IN (2, 7, 9)) BEGIN /******************************************************** ******************************************************** Section: logging error messages Source table: [SSISDB].[internal].[operation_messages] message type: 10: OnPreValidate 20: OnPostValidate 30: OnPreExecute 40: OnPostExecute 60: OnProgress 70: OnInformation 90: Diagnostic 110: OnWarning 120: OnError 130: Failure 140: DiagnosticEx 200: Custom events 400: OnPipeline message source type: 10: Messages logged by the entry APIs (e.g. T-SQL, CLR Stored procedures) 20: Messages logged by the external process used to run package (ISServerExec) 30: Messages logged by the package-level objects 40: Messages logged by tasks in the control flow 50: Messages logged by containers (For, ForEach, Sequence) in the control flow 60: Messages logged by the Data Flow Task ******************************************************** ********************************************************/ INSERT INTO AUDIT.PackageInstanceExecutionOperationErrorLink SELECT @PackageExecutionLogID ,[operation_message_id] FROM [SSISDB].[internal].[operation_messages] WITH(NOLOCK) WHERE operation_id = @execution_id AND message_type IN (120, 130) EXEC [AUDIT].[FailPackageInstanceExecution] @PackageExecutionLogID, 'SSISDB Internal operation_messages found' GOTO ReturnTrueAsErrorFlag /******************************************************** ******************************************************** Section: checking messages END ******************************************************** ********************************************************/ /* This part is not really working, so now using rowcount to pass status --DECLARE @PackageErrorMessage NVARCHAR(4000) --SET @PackageErrorMessage = @PackageName + 'failed with executionID: ' + CONVERT(VARCHAR(20), @execution_id) --RAISERROR (@PackageErrorMessage -- Message text. -- , 18 -- Severity, -- , 1 -- State, -- , N'check table AUDIT.PackageInstanceExecutionErrorMessages' -- First argument. -- ); */ END ELSE BEGIN GOTO ReturnFalseAsErrorFlagToSignalSuccess END /******************************************************** ******************************************************** Section: checking execution result END ******************************************************** ********************************************************/ END TRY BEGIN CATCH DECLARE @SSISCatalogCallError NVARCHAR(MAX) SELECT @SSISCatalogCallError = ERROR_MESSAGE() EXEC [AUDIT].[FailPackageInstanceExecution] @PackageExecutionLogID, @SSISCatalogCallError GOTO ReturnTrueAsErrorFlag END CATCH; /******************************************************** ******************************************************** Section: end result ******************************************************** ********************************************************/ ReturnTrueAsErrorFlag: SELECT CONVERT(BIT, 1) AS PackageExecutionErrorExists ReturnFalseAsErrorFlagToSignalSuccess: SELECT CONVERT(BIT, 0) AS PackageExecutionErrorExists GO

Read the article

Welcome to the SOA & E2.0 Partner Community Forum

- by Jürgen Kress

With more than 200 registrations the SOA & E2.0 Partner Community Forum is a huge success! Conference program Is available online: http://tinyurl.com/soaforumagenda Agenda Tuesday March 15th 2011 12:15 Welcome & Introduction – Hans Blaas & Jürgen Kress, Oracle 12:30 Oracle Middleware Strategy and Information on Application Grid and Exalogic - Andrew Sutherland, Oracle 13:15 Managing Online Customer, Partner and Employee Engagement Oracle E2.0 Solutions - Andrew Gilboy, Oracle 14:00 Coffee Break 14:30 Partner SOA/ BPM Reference Case – Leon Smiers, Capgemini 15:15 Partner WebCenter/ UCM Reference Case – Vikram Setia, Infomentum 16.00 Break 16.30 SOA and BPM 11gR1 PS3 Update – David Shaffer 17:00 Why specialization is important for Partners – Nick Kritikos, Hans Blaas & Jürgen Kress 17:45 Social Event Wednesday March 16th 2011 09.00 Welcome & Introduction Day II 09.15 Breakout sessions Round 1 SOA Suite 11g PS3 & OSB Importance of ADF & Jdeveloper SOA Security IDM WebCenter PS3, Whats New E2.0 Sales Plays 10.30 Break 10.45 Breakout sessions Round 2 WebCenter PS3, Whats New Applications Management Enterprise Manager and Amberpoint ADF/WebCenter 11g integration with BPM Suite 11g Importance of ADF & Jdeveloper JCAPS & OC4J migration opportunities for service business 12.00 Lunch 13.00 Breakout sessions Round 3 BPM 11g, Whats New Universal Content Management! 11g SOA Security IDM E2.0 Surrounding Products: ATG, Documaker, Primavera Middleware Industry Value Propositions & Sales Plays 14.30 Break 14.45 Fusion Applications, Rajan Krishnan, Oracle 15.30 SOA & E2.0 Summary & Closing, Hans Blaas & Jürgen Kress, Oracle 15.45 Finish & Departure 16:00 Bus departure Capgemini Nederland BV Papendorpseweg 100 3500 GN Utrecht The Netherlands Tel: +31 30 689 00 00 For a detailed routedescription by car or public transport please visit: http://www.nl.capgemini.com/pdf/Papendorp_UK.pdf Hotel In case you have not booked your hotel yet, please make your own hotel reservation. You can book your hotel room at the 'Hotel Vianen' at a special rate, by using the Oracle booking code: DDG VIA-GF41422. One night package € 110,- for a single room, including breakfast. Kindly secure your hotel room as soon as possible. The number of rooms is limited! Hotel Vianen Prins Bernhardstraat 75 4132 XE Vianen [email protected] The Netherlands [email protected] Arrival on 14th of March and staying at Hotel Vianen. On 15th of March we have arranged a transfer from Hotel Vianen to the Capgemini Offices. The bus is parked in front of the hotel and will leave at 10.15AM (UTC/GMT+1). Logistics Pass with barcode At your arrival you will receive a pass with a barcode. This pass will give you access to the conference building and the different floors within the building. Please make sure to hand in your pass at the registration desk at the end of the day. Arrival by plane Transfer from Schiphol Airport to Capgemini on 15th of March will be arranged by Oracle. A hostess will be welcoming you at the Meeting Point at Schiphol Airport (this is a red and white large cubicle situated next to Delifrance) The buses will depart from Schiphol Airport at 09.00AM, 09.45AM and 10.30AM (UTC/GMT+1). For future SOA Partner Community Forums become a member for registration please visit www.oracle.com/goto/emea/soa (OPN account required) Blog Twitter LinkedIn Mix Forum Wiki Website Technorati Tags: SOA Partner Community Forum,Community,SOA Partner Community,Utrecht 03.2011,OPN,Oracle,Jürgen Kress

Read the article

Launch Webcast Q&A: Oracle WebCenter Suite 11g - The Platform for the Modern User Experience

- by howard.beader(at)oracle.com

Did you have a chance to watch the Oracle WebCenter Suite 11g Launch Webcast yet? Andy MacMillan presented some great information on the webcast and answered quite a few of your questions in the Q&A session as well. For your reading pleasure we have captured a number of the questions and answers and they are summarized below: Question: Can you tell me what should our Portal strategy be for integrating and extending our Oracle enterprise applications? Answer: We recommend that you look at this in two steps, the first would be to ensure that you have a good understanding of our common user experience architecture. Internally our product teams at Oracle are already investing in this quite heavily today for Fusion Applications and this is driving natural convergence from a UX strategy standpoint. The second step would be to look at how best to componentize the back office applications so that the business users across your organization can take advantage of these -- don't make it just about putting a new skin on top of what you already have from an application standpoint, instead look at how best to embed the social computing capabilities as part of the solution for your business users. Question: We are currently using the BEA WebLogic Portal now, should we stay on WLP or should we be looking at moving to WebCenter or when should we move to WebCenter? Answer: Our strategy has been called "Continue & Converge", this theme means that you can continue to use WebLogic or Plumtree portals until your organization is ready to move to WebCenter and in the mean time you can continue to deploy what you need to in your organization of WLP or WCI Portals with the full support of Oracle. In addition WebCenter Services can be leveraged for social computing to complement what you are already doing today and enable your organization to take advantage of some of the latest and greatest social computing capabilities. We have migration scripts and conversion capabilities available as well as programs where Oracle can help you evaluate your options to decide how best to move forward. WebCenter provides the best of the best capabilities and will enable you to take advantage of new capabilities that may not exist in your current portal today. In the end though it's up to you as a customer as to when you want to make the transition to Oracle WebCenter Suite. Question: Can you tell me how is Oracle leveraging WebCenter internally and for its Application and Middleware product UX strategies? Answer: Internally, Oracle is leveraging WebCenter for our employees and thus far we are seeing significant updates with our users taking advantage of the business activity streams, team spaces and collaboration capabilities. From a product strategy standpoint, our product teams are taking advantage of the common user experience architecture and leveraging WebCenter to provide social and collaborative capabilities to the Oracle Applications and providing new types of composite applications with what is coming with Fusion Applications. WebCenter also provides a common user experience across all the products in the Oracle Fusion Middleware family as well. Question: Our organization is currently using SharePoint, but we are also an Oracle Applications customer, how should we be thinking about WebCenter as we move forward? Answer: Great question. Typically, we are seeing organizations using SharePoint for its core use cases of small team collaboration and file server replacement. WebCenter can connect to SharePoint as a content source to feed into WebCenter quite easily and it leverages the robust Oracle ECM product under WebCenter as well. In addition, SharePoint team sites can be connected to WebCenter utilizing our SharePoint connector. With Oracle WebCenter though, we are really targeting business users and enterprise applications, thus affecting positive change on the processes that drive the business to improve productivity across your organization. Question: Are organizations today using WebCenter as a Web platform for externally facing public websites? Answer: Yes, we are seeing a convergence around web content management and portal types of websites with customers converting them from just broadcasting content to making it a much richer personalized experience and also exposing back-office applications as well. Web Content Management capabilities are already embedded in WebCenter so that organizations can take advantage now of the benefits a personalized web experience provides for your customers. This is simply a short summary of a few of the questions addressed on the webcast, please tune in now to learn more about Oracle WebCenter, the user experience platform for the enterprise and the web! The Oracle WebCenter Suite 11g Launch Webcast can be found here

Read the article

How SQL Server 2014 impacts Red Gate’s SQL Compare

- by Michelle Taylor

SQL Compare 10.7 successfully connects to SQL Server 2014, but it doesn’t yet cover the SQL Server 2014 features which would require us to make major changes to SQL Compare to support. In this post I’m going to talk about the SQL Server 2014 features we’ve already begun supporting, and which ones we’re working on for the next release of SQL Compare (v11). From SQL Compare’s perspective, the new memory-optimized table functionality (some might know it as ‘Hekaton’) has been the most important change. It can’t be described as its own object type, but the new functionality is split across two existing object types (three if you count indexes), as it also comes with native stored procedures and inline indexes. Along with connectivity support, the SQL Compare team has already implemented the first part of the puzzle – inline specification of indexes. These are essential for memory-optimized tables because it’s not possible to alter the memory optimized table’s structure, and so indexes can’t be added after the fact without dropping the table. Books Online shows this in more detail in the table_index and column_index clauses of http://msdn.microsoft.com/en-us/library/ms174979(v=sql.120).aspx. SQL Compare 10.7 currently supports reading the new inline index specification from script folders and source control repositories, and will write out inline indexes where it’s necessary to do so (i.e. in UDDTs or when attempting to write projects compatible with the SSDT database project format). However, memory-optimized tables themselves are not yet supported in 10.7. The team is actively working on making them available in the v11 release with full support later in the year, and in a beta version before that. Fortunately, SQL Compare already has some ways of handling tables that have to be dropped and created rather than altered, which are being adapted to handle this new kind of table. Because it’s one of the largest new database engine features, there’s an equally large Books Online section on memory-optimized tables, but for us the most important parts of the documentation are the normal table features that are changed or unsupported and the new syntax found in the T-SQL reference pages. We are treating SQL Compare’s support of Natively Compiled Stored Procedures as a separate unit of work, which will be available in a subsequent beta and also feed into the v11 release. This new type of stored procedure is designed to work with memory-optimized tables to maintain the performance improvements gained by them – but you can still also access memory-optimized tables from normal stored procedures and ad-hoc queries. To us, they’re essentially a limited-syntax stored procedure with a few extra options in the create statement, embodied in the updated CREATE PROCEDURE documentation and with the detailed limitations. They should be easier to handle than memory-optimized tables simply because the handling of stored procedures is less sensitive to dropping the object than the handling of tables. However, both share an incompatibility with DDL triggers and Event Notifications which mean we’ll need to temporarily disable these during the specific deployment operations that involve them – don’t worry, we’ll supply a warning if this is the case so that you can check your auditing arrangements can handle the situation. There are also a handful of other improvements in SQL Server 2014 which affect SQL Compare and SQL Data Compare that are not connected to memory optimized tables. The largest of these are the improvements to columnstore indexes, with the capability to create clustered columnstore indexes and update columnstore tables through them – for more detail, take a look at the new syntax reference. There’s also a new index option for better compression of columnstores (COLUMNSTORE_ARCHIVE) and a new statistics option for incremental per-partition statistics, plus the 90 compatibility level is being retired. We’re planning to finish up these small clean-up features last, and be ready to release SQL Compare 11 with full SQL 2014 support early in Q3 this year. For a more thorough overview of what’s new in SQL Server 2014, Books Online’s What’s New section is a good place to start (although almost all the changes in this version are in the Database Engine).

Read the article

OWB 11gR2 - Find and Search Metadata in Designer

- by David Allan

Here are some tools and techniques for finding objects, specifically in the design repository. There are ways of navigating and collating objects that are useful for day to day development and build-time usage - this includes features out of the box and utilities constructed on top. There are a variety of techniques to navigate and find objects in the repository, the first 3 are out of the box, the 4th is an expert utility. Navigating by the tree, grouping by project and module - ok if you are aware of the exact module/folder that objects reside in. The structure panel is a useful way of finding parts of an object, especially when large rather than using the canvas. In large scale projects it helps to have accelerators (either find or collections below). Advanced find to search by name - 11gR2 included a find capability specifically for large scale projects. There were improvements in both the tree search and the object editors (including highlighting in mapping for example). So you can now do regular expression based search and quickly navigate to objects within a repository. Collections - logically organize your objects into virtual folders by shortcutting the actual objects. This is useful for a range of things since all the OWB services operate on collections too (export/import, validation, deployment). See the post here for new collection functionality in 11gR2. Reports for searching by type, updated on, updated by etc. Useful for activities such as periodic incremental actions (deploy all mappings changed in the past week). The report style view is useful since I can quickly see who changed what and when. You can see all the audit details for objects within each objects property inspector, but its useful to just get all objects changed today or example, all objects changed since my last build etc. This utility combines both UI extensions via experts and the public views on the repository. In the figure to the right you see the contextual option 'Object Search' which invokes the utility, you can see I have quite a number of modules within my project. Figure out all the potential objects which have been changed is not simple. The utility is an expert which provides this kind of search capability. The utility provides a report of the objects in the design repository which satisfy some filter criteria. The type of criteria includes; objects updated in the last n days optionally filter the objects updated by user filter the user by project and by type (table/mappings etc.) The search dialog appears with these options, you can multi-select the object types, so for example you can select TABLE and MAPPING. Its also possible to search across projects if need be. If you have multiple users using the repository you can define the OWB user name in the 'Updated by' property to restrict the report to just that user also. Finally there is a search name that will be used for some of the options such as building a collection - this name is used for the collection to be built. In the example I have done, I've just searched my project for all process flows and mappings that users have updated in the last 7 days. The results of the query are returned in a table containing the object names, types, full path and audit details. The columns are sort-able, you can sort the results by name, type, path etc. One of the cool things here, is that you can then perform operations on these objects - such as edit them, export single selection or entire results to MDL, create a collection from the results (now you have a saved set of references in the repository, you could do deploy/export etc.), create a deployment script from the results...or even add in your own ideas! You see from this that you can do bulk operations on sets of objects based on search results. So for example selecting the 'Build Collection' option creates a collection with all of the objects from my search, you can subsequently deploy/generate/maintain this collection of objects. Under the hood of the expert if just basic OMB commands from the product and the use of the public views on the design repository. You can see how easy it is to build up macro-like capabilities that will help you do day-to-day as well as build like tasks on sets of objects.

Read the article

OSI Model

- by kaleidoscope

The Open System Interconnection Reference Model (OSI Reference Model or OSI Model) is an abstract description for layered communications and computer network protocol design. In its most basic form, it divides network architecture into seven layers which, from top to bottom, are the Application, Presentation, Session, Transport, Network, Data Link, and Physical Layers. It is therefore often referred to as the OSI Seven Layer Model. A layer is a collection of conceptually similar functions that provide services to the layer above it and receives service from the layer below it. Description of OSI layers: Layer 1: Physical Layer · Defines the electrical and physical specifications for devices. In particular, it defines the relationship between a device and a physical medium. · Establishment and termination of a connection to a communications medium. · Participation in the process whereby the communication resources are effectively shared among multiple users. · Modulation or conversion between the representation of digital data in user equipment and the corresponding signals transmitted over a communications channel. Layer 2: Data Link Layer · Provides the functional and procedural means to transfer data between network entities. · Detect and possibly correct errors that may occur in the Physical Layer. The error check is performed using Frame Check Sequence (FCS). · Addresses is then sought to see if it needs to process the rest of the frame itself or whether to pass it on to another host. · The Layer is divided into two sub layers: The Media Access Control (MAC) layer and the Logical Link Control (LLC) layer. · MAC sub layer controls how a computer on the network gains access to the data and permission to transmit it. · LLC layer controls frame synchronization, flow control and error checking. Layer 3: Network Layer · Provides the functional and procedural means of transferring variable length data sequences from a source to a destination via one or more networks. · Performs network routing functions, and might also perform fragmentation and reassembly, and report delivery errors. · Network Layer Routers operate at this layer—sending data throughout the extended network and making the Internet possible. Layer 4: Transport Layer · Provides transparent transfer of data between end users, providing reliable data transfer services to the upper layers. · Controls the reliability of a given link through flow control, segmentation/de-segmentation, and error control. · Transport Layer can keep track of the segments and retransmit those that fail. Layer 5: Session Layer · Controls the dialogues (connections) between computers. · Establishes, manages and terminates the connections between the local and remote application. · Provides for full-duplex, half-duplex, or simplex operation, and establishes checkpointing, adjournment, termination, and restart procedures. · Implemented explicitly in application environments that use remote procedure calls. Layer 6: Presentation Layer · Establishes a context between Application Layer entities, in which the higher-layer entities can use different syntax and semantics, as long as the presentation service understands both and the mapping between them. The presentation service data units are then encapsulated into Session Protocol data units, and moved down the stack. · Provides independence from differences in data representation (e.g., encryption) by translating from application to network format, and vice versa. The presentation layer works to transform data into the form that the application layer can accept. This layer formats and encrypts data to be sent across a network, providing freedom from compatibility problems. It is sometimes called the syntax layer. Layer 7: Application Layer · This layer interacts with software applications that implement a communicating component. · Identifies communication partners, determines resource availability, and synchronizes communication. o When identifying communication partners, the application layer determines the identity and availability of communication partners for an application with data to transmit. o When determining resource availability, the application layer must decide whether sufficient network or the requested communication exists. o In synchronizing communication, all communication between applications requires cooperation that is managed by the application layer. Technorati Tags: Kunal,OSI,Networking

Read the article

The Evolution Of C#

- by Paulo Morgado

The first release of C# (C# 1.0) was all about building a new language for managed code that appealed, mostly, to C++ and Java programmers. The second release (C# 2.0) was mostly about adding what wasn’t time to built into the 1.0 release. The main feature for this release was Generics. The third release (C# 3.0) was all about reducing the impedance mismatch between general purpose programming languages and databases. To achieve this goal, several functional programming features were added to the language and LINQ was born. Going forward, new trends are showing up in the industry and modern programming languages need to be more: Declarative With imperative languages, although having the eye on the what, programs need to focus on the how. This leads to over specification of the solution to the problem in hand, making next to impossible to the execution engine to be smart about the execution of the program and optimize it to run it more efficiently (given the hardware available, for example). Declarative languages, on the other hand, focus only on the what and leave the how to the execution engine. LINQ made C# more declarative by using higher level constructs like orderby and group by that give the execution engine a much better chance of optimizing the execution (by parallelizing it, for example). Concurrent Concurrency is hard and needs to be thought about and it’s very hard to shoehorn it into a programming language. Parallel.For (from the parallel extensions) looks like a parallel for because enough expressiveness has been built into C# 3.0 to allow this without having to commit to specific language syntax. Dynamic There was been lots of debate on which ones are the better programming languages: static or dynamic. The fact is that both have good qualities and users of both types of languages want to have it all. All these trends require a paradigm switch. C# is, in many ways, already a multi-paradigm language. It’s still very object oriented (class oriented as some might say) but it can be argued that C# 3.0 has become a functional programming language because it has all the cornerstones of what a functional programming language needs. Moving forward, will have even more. Besides the influence of these trends, there was a decision of co-evolution of the C# and Visual Basic programming languages. Since its inception, there was been some effort to position C# and Visual Basic against each other and to try to explain what should be done with each language or what kind of programmers use one or the other. Each language should be chosen based on the past experience and familiarity of the developer/team/project/company and not by particular features. In the past, every time a feature was added to one language, the users of the other wanted that feature too. Going forward, when a feature is added to one language, the other will work hard to add the same feature. This doesn’t mean that XML literals will be added to C# (because almost the same can be achieved with LINQ To XML), but Visual Basic will have auto-implemented properties. Most of these features require or are built on top of features of the .NET Framework and, the focus for C# 4.0 was on dynamic programming. Not just dynamic types but being able to talk with anything that isn’t a .NET class. Also introduced in C# 4.0 is co-variance and contra-variance for generic interfaces and delegates. Stay tuned for more on the new C# 4.0 features.

Read the article

Asynchrony in C# 5: Dataflow Async Logger Sample

- by javarg

Check out this (very simple) code examples for TPL Dataflow. Suppose you are developing an Async Logger to register application events to different sinks or log writers. The logger architecture would be as follow: Note how blocks can be composed to achieved desired behavior. The BufferBlock<T> is the pool of log entries to be process whereas linked ActionBlock<TInput> represent the log writers or sinks. The previous composition would allows only one ActionBlock to consume entries at a time. Implementation code would be something similar to (add reference to System.Threading.Tasks.Dataflow.dll in %User Documents%\Microsoft Visual Studio Async CTP\Documentation): TPL Dataflow Logger var bufferBlock = new BufferBlock<Tuple<LogLevel, string>>(); ActionBlock<Tuple<LogLevel, string>> infoLogger = new ActionBlock<Tuple<LogLevel, string>>( e => Console.WriteLine("Info: {0}", e.Item2)); ActionBlock<Tuple<LogLevel, string>> errorLogger = new ActionBlock<Tuple<LogLevel, string>>( e => Console.WriteLine("Error: {0}", e.Item2)); bufferBlock.LinkTo(infoLogger, e => (e.Item1 & LogLevel.Info) != LogLevel.None); bufferBlock.LinkTo(errorLogger, e => (e.Item1 & LogLevel.Error) != LogLevel.None); bufferBlock.Post(new Tuple<LogLevel, string>(LogLevel.Info, "info message")); bufferBlock.Post(new Tuple<LogLevel, string>(LogLevel.Error, "error message")); Note the filter applied to each link (in this case, the Logging Level selects the writer used). We can specify message filters using Predicate functions on each link. Now, the previous sample is useless for a Logger since Logging Level is not exclusive (thus, several writers could be used to process a single message). Let´s use a Broadcast<T> buffer instead of a BufferBlock<T>. Broadcast Logger var bufferBlock = new BroadcastBlock<Tuple<LogLevel, string>>( e => new Tuple<LogLevel, string>(e.Item1, e.Item2)); ActionBlock<Tuple<LogLevel, string>> infoLogger = new ActionBlock<Tuple<LogLevel, string>>( e => Console.WriteLine("Info: {0}", e.Item2)); ActionBlock<Tuple<LogLevel, string>> errorLogger = new ActionBlock<Tuple<LogLevel, string>>( e => Console.WriteLine("Error: {0}", e.Item2)); ActionBlock<Tuple<LogLevel, string>> allLogger = new ActionBlock<Tuple<LogLevel, string>>( e => Console.WriteLine("All: {0}", e.Item2)); bufferBlock.LinkTo(infoLogger, e => (e.Item1 & LogLevel.Info) != LogLevel.None); bufferBlock.LinkTo(errorLogger, e => (e.Item1 & LogLevel.Error) != LogLevel.None); bufferBlock.LinkTo(allLogger, e => (e.Item1 & LogLevel.All) != LogLevel.None); bufferBlock.Post(new Tuple<LogLevel, string>(LogLevel.Info, "info message")); bufferBlock.Post(new Tuple<LogLevel, string>(LogLevel.Error, "error message")); As this block copies the message to all its outputs, we need to define the copy function in the block constructor. In this case we create a new Tuple, but you can always use the Identity function if passing the same reference to every output. Try both scenarios and compare the results.

Read the article

WEB203 – Jump into Silverlight!… and Become Effective Immediately with Tim Huckaby, Fou

- by Robert Burger

Getting ready for the good stuff. Definitely wish there were more Silverlight and WCF RIA sessions, but this is a start. Was lucky to get a coveted power-enabled seat. Luckily, due to my trustily slow Verizon data card, I can get these notes out amidst a total Internet outage here. This is the second breakout session of the day, and is by far standing-room only. I stepped out before the session started to get a cool Diet COKE and wouldn’t have gotten back in if I didn’t already have a seat. Tim says this is an intro session and that he’s been begging for intro sessions at TechEd for years and that by looking at this audience, he thinks the demand is there. Admittedly, I didn’t know this was an intro session, or I might have gone elsewhere. But, it was the very first Silverlight session, so I had to be here. Tim says he will be providing a very good comprehensive reference application at the end of the presentation. He has just demoed it, and it is a full CRUD-based Sales Manager application based on… AdventureWorks! Session Agenda What it is / How to get started Declarative Programming Layout and Controls, Events and Commands Working with Data Adding Style to Your Application Silverlight… “WPF Light” Why is the download 4.2MB? Because the direct competitor is a 4.2MB download. There is no technical reason it is not the entire framework. It is purely to “be competitive”. Getting Started Get all of the following downloads from www.silverlight.net/getstarted Install VS2010 or Visual Web Developer Express 2010 Install Silverlight 4 Tools for VS2010 Install Expression Blend 4 Install the Silverlight 4 Toolkit Reference Application Features Uses MVVM pattern – a way to move data access code that would normally be inline within the UI and placing it in nice data access libraries Images loaded dynamically from the database, converting GIF to PNG because Silverlight does not support GIF. LINQ to SQL is the data access model WCF is the data provider and is using binary message encoding Declarative Programming XAML replaces code for UI representation Attributes control Layout and Style Event handlers wired-up in XAML Declarative Data Binding Layout Overview Content rendering flows inside of parent Fixed positioning (Canvas) is seldom used Panels are used to house content Margins and Padding over fixed size Panels StackPanel – Arranges child elements into a single line oriented horizontally or vertically Grid – A flexible grid are that consists of rows and columns Canvas – An are where positions are specifically fixed WrapPanel (in Toolkit) – Positions child elements in sequential position left to right and top to bottom. DockPanel (in Toolkit) – Positions child controls within a dockable area Positioning Horizontal and Vertical Alignment Margin – Separates an element from neighboring elements Padding – Enlarges the effective size of an element by a thickness Controls Overview Not all controls created equal Silverlight, as a subset of WPF, so many WPF controls do not exist in the core Siverlight release Silverlight Toolkit continues to add controls, but are released in different quality bands Plenty of good 3rd party controls to fill the gaps Windows Phone 7 is to have 95% of controls available in Silverlight Core and Toolkit. Events and Commands Standard .NET Events Routed Events Commands – based on the ICommand interface – logical action that can be invoked in several ways Adding Style to Your Application Resource Dictionaries – Contains a hash table of key/value pairs. Silverlight can only use Static Resources whereas WPF can also use Dynamic Resources Visual State Manager Silverlight 4 supports Implicit styles ResourceDictionary.MergedDictionaries combines many different file-based resources Downloads

Read the article

Browser History ASP.Net AJAX: Microsoft.Web.Preview

- by Narendra Tiwari

I remember in 2006 we were working on a portal for our client Venetian, Las Vegas and the portal is full of AJAX features. One of my friend facing a challange to retain browser history with all AJAX operation. In terms of user experience it is an important aspect which could not be avoided in that scenario. Well that time we have made some workarounds to achieve the same but that may not be the perfect solution. Ok.. Now with Microsoft AJAX there are a lot of such features can be achieved with optimum efficiency. Microsoft AJAX has grown its features over the past few years. Microsoft.Web.Preview.dll is an addon in conjunction with ASP.Net AJAX. It contains a control named "History" for that purpose. Source code:- http://download.microsoft.com/download/8/3/1/831ffcd7-c571-4075-b8fa-6ff678794f60/CS-ASP-ASPBrowserHistoryinAJAX_cs.zip Below is a small sample to demonstrate the control. 1/ Get dll from the above source code bin, and add reference to your web application. 2/ Rightclick on toolbox panel and Choose Item, browse assembly. now you will be able to see History control. 3/ Add below section group in web.config under <configSections> <sectionGroup name="microsoft.web.preview" type="Microsoft.Web.Preview.Configuration.PreviewSectionGroup, Microsoft.Web.Preview"> <section name="search" type="Microsoft.Web.Preview.Configuration.SearchSection, Microsoft.Web.Preview" requirePermission="false" allowDefinition="MachineToApplication"/> <section name="searchSiteMap" type="Microsoft.Web.Preview.Configuration.SearchSiteMapSection, Microsoft.Web.Preview" requirePermission="false" allowDefinition="MachineToApplication"/> <section name="diagnostics" type="Microsoft.Web.Preview.Configuration.DiagnosticsSection, Microsoft.Web.Preview" requirePermission="false" allowDefinition="MachineToApplication"/> </sectionGroup> 4/ Now create a simple webpage a textbox (txt1), button (btn1) in an updatePanel with History control (History1). We will fill in text box and post the fom by clicking button a few times then verify if the browse history is retained. Remember button and textbox must be inside UpdatePanel and History control outside the UpdatePanel. <%@Page Language="C#" AutoEventWireup="true" CodeFile="History.aspx.cs" Inherits="History" %> <%@ Register Assembly="Microsoft.Web.Preview" Namespace="Microsoft.Web.Preview.UI.Controls" TagPrefix="cc1" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" > <head runat="server"> <title>Untitled Page</title> </head> <body> <form id="form1" runat="server"> <asp:ScriptManager ID="ScriptManager1" runat="server" EnablePartialRendering="true"></asp:ScriptManager> <div> <cc1:History ID="History1" runat="server" OnNavigate="History1_Navigate"> </cc1:History> <asp:UpdatePanel ID="up1" runat="server"> <ContentTemplate> <asp:TextBox ID="txt1" runat="server"></asp:TextBox><br /> <asp:Button ID="btn1" runat="server" Text="Test" OnClick="btn1_Click" /> </ContentTemplate> <Triggers> <asp:AsyncPostBackTrigger ControlID="History1" /> </Triggers> </asp:UpdatePanel> </div> </form> </body> </html> 5/ Below code to add the textbox value in history everytime we post back using btn1 click. protected void btn1_Click(object sender, EventArgs e) { History1.AddHistoryPoint("txtState",txt1.Text); } 6/ and finally Navigate event of History control protected void History1_Navigate(object sender, Microsoft.Web.Preview.UI.Controls.HistoryEventArgs args) { string strState = string.Empty; if (args.State.ContainsKey("txtState")) { strState = (string)args.State["txtState"]; } txt1.Text = strState; } Now all set to go :) Reference: http://www.dotnetglobe.com/2008/08/using-asp.html

Read the article

Anatomy of a serialization killer

- by Brian Donahue

As I had mentioned last month, I have been working on a project to create an easy-to-use managed debugger. It's still an internal tool that we use at Red Gate as part of product support to analyze application errors on customer's computers, and as such, should be easy to use and not require installation. Since the project has got rather large and important, I had decided to use SmartAssembly to protect all of my hard work. This was trivial for the most part, but the loading and saving of results was broken by SA after using the obfuscation, rendering the loading and saving of XML results basically useless, although the merging and error reporting was an absolute godsend and definitely worth the price of admission. (Well, I get my Red Gate licenses for free, but you know what I mean!)My initial reaction was to simply exclude the serializable results class and all of its' members from obfuscation, and that was just dandy, but a few weeks on I decided to look into exactly why serialization had broken and change the code to work with SA so I could write any new code to be compatible with SmartAssembly and save me some additional testing and changes to the SA project.In simple terms, SA does all that it can to prevent serialization problems, for instance, it will not obfuscate public members of a DLL and it will exclude any types with the Serializable attribute from obfuscation. This prevents public members and properties from being made private and having the name changed. If the serialization is done inside the executable, however, public members have the access changed to private and are renamed. That was my first problem, because my types were in the executable assembly and implemented ISerializable, but did not have the Serializable attribute set on them!public class RedFlagResults : ISerializable { }The second problem caused by the pruning feature. Although RedFlagResults had public members, they were not truly properties, and used the GetObjectData() method of ISerializable to serialize the members. For that reason, SA could not exclude these members from pruning and further broke the serialization. public class RedFlagResults : ISerializable { public List<RedFlag.Exception> Exceptions; #region ISerializable Members public void GetObjectData(SerializationInfo info, StreamingContext context) { info.AddValue("Exceptions", Exceptions); } #endregionSo to fix this, it was necessary to make Exceptions a proper property by implementing get and set on it. Also, I added the Serializable attribute so that I don't have to exclude the class from obfuscation in the SA project any more. The DoNotPrune attribute means I do not need to exclude the class from pruning.[Serializable, SmartAssembly.Attributes.DoNotPrune] public class RedFlagResults { public List<RedFlag.Exception> Exceptions {get;set;} }Similarly, the Exception class gets the Serializable and DoNotPrune attributes applied so all of its' properties are excluded from obfuscation.Now my project has some protection from prying eyes by scrambling up the code so it's harder to reverse-engineer, without breaking anything. SmartAssembly has also provided the benefit of merging so that the end-user doesn't need to extract all of the DLL files needed by RedFlag into a directory, and can be run directly from the .zip archive. When an error occurs (hey, I'm only human!), an exception report can be sent to me so I can see what went wrong without having to, er, debug the debugger.

Read the article

MySQL for Excel 1.3.0 Beta has been released

- by Javier Treviño

The MySQL Windows Experience Team is proud to announce the release of MySQL for Excel version 1.3.0. This is a beta release for 1.3.x. MySQL for Excel is an application plug-in enabling data analysts to very easily access and manipulate MySQL data within Microsoft Excel. It enables you to directly work with a MySQL database from within Microsoft Excel so you can easily do tasks such as: Importing MySQL data into Excel Exporting Excel data directly into MySQL to a new or existing table Editing MySQL data directly within Excel As this is a beta version the MySQL for Excel product can be downloaded only by using the product standalone installer at this link http://dev.mysql.com/downloads/windows/excel/ Your feedback on this beta version is very well appreciated, you can raise bugs on the MySQL bugs page or give us your comments on the MySQL for Excel forum. Changes in MySQL for Excel 1.3.0 (2014-06-06, Beta) This section documents all changes and bug fixes applied to MySQL for Excel since the release of 1.2.1. Several new features were added, for more information see What Is New In MySQL for Excel (http://dev.mysql.com/doc/refman/5.6/en/mysql-for-excel-what-is-new.html). Known limitations: Upgrading from versions MySQL for Excel 1.2.0 and lower is not possible due to a bug fixed in MySQL for Excel 1.2.1. In that scenario, the old version (MySQL for Excel 1.2.0 or lower) must be uninstalled first. Upgrading from version 1.2.1 works correctly. <CTRL> + <A> cannot be used to select all database objects. Either <SHIFT> + <Arrow Key> or <CTRL> + click must be used instead. PivotTables are normally placed to the right (skipping one column) of the imported data, they will not be created if there is another existing Excel object at that position. Functionality Added or Changed Imported data can now be refreshed by using the native Refresh feature. Fields in the imported data sheet are then updated against the live MySQL database using the saved connection ID. Functionality was added to import data directly into PivotTables, which can be created from any Import operation. Multiple objects (tables and views) can now be imported into Excel, when before only one object could be selected. Relational information is also utilized when importing multiple objects. All options now have descriptive tooltips. Hovering over an option/preference displays helpful information about its use. A new Export Data, Advanced Options option was added that shows all available data types in the Data Type combo box, instead of only showing a subset of the most popular data types. The option dialogs now include a Refresh to Defaults button that resets the dialog's options to their defaults values. Each option dialog is set individually. A new Add Summary Fields for Numeric Columns option was added to the Import Data dialog that automatically adds summary fields for numeric data after the last row of the imported data. The specific summary function is selectable from many options, such as "Total" and "Average." A new collation option was added for the schema and table creation wizards. The default schema collation is "Server Default", and the default table collation is "Schema Default". Collation options may be selected from a drop-down list of all available collations. Quick links: MySQL for Excel documentation: http://dev.mysql.com/doc/en/mysql-for-excel.html. MySQL on Windows blog: http://blogs.oracle.com/MySQLOnWindows. MySQL for Excel forum: http://forums.mysql.com/list.php?172. MySQL YouTube channel: http://www.youtube.com/user/MySQLChannel. Enjoy and thanks for the support!

Search Results

Search found 18985 results on 760 pages for 'reference types'.

Page 209/760 | < Previous Page | 205 206 207 208 209 210 211 212 213 214 215 216 | Next Page >

- by pinaldave

- by Jalpesh P. Vadgama

- by Gopinath

- by David Totzke

- by Zed

- by Your DisplayName here!

- by Compudicted

- by charlie.mott

- by Knut Vatsendvik

- by nikolaosk

- by Michael Freidgeim

- by Kevin Shyr

- by Jürgen Kress

- by howard.beader(at)oracle.com

- by Michelle Taylor

- by David Allan

- by kaleidoscope

- by Paulo Morgado

- by javarg

- by Robert Burger

- by Narendra Tiwari

- by Brian Donahue

- by Javier Treviño

< Previous Page | 205 206 207 208 209 210 211 212 213 214 215 216 | Next Page >