Search Results

Search found 18773 results on 751 pages for 'router configuration'.

Page 209/751 | < Previous Page | 205 206 207 208 209 210 211 212 213 214 215 216  | Next Page >

• Windows 7 wifi reports "no network access" and "no internet access" but connects in fedora

  - by rick2047

  I am running windows 7 home basic (64bit) on a Acer 5742G laptop with Atheos wifi adapter in it. Yesterday, I hiberneted my computer as I always do and up untill then the wifi was working fine. When I booted my computer up again today I started having a strange problem: It detects my wifi but after connecting to it, it keeps on oscillating between states of no network access and no internet access. I can't connect to anything (the internet or my router). I tried to reset my internet protocol stack using this fixit file. I also tried to uninstall and reinstall my network driver. Neither helped. I am using the same laptop's fedora installation right now and the wifi is working perfectly fine. Please help. Edit To add additional details, I have Microsoft Security essentials as my antivirus software and I haven't messed with the firewall or the router configurations.

  Read the article

• Configuring Nagios BGP plugin on Ubuntu

  - by user141610

  I am trying to configure nagios check_bgp_neighbors plug-in on Ubuntu and followed README file of check_bgp_neighbors plug-in. I have made following changes: define command{ command_name check_bgp_all command_line $USER1$/check_bgp_neighbors -H $HOSTADDRESS$ -C $USER3$ -n $ARG1$ -n $ARG2$ } to define command{ command_name check_bgp_all command_line /usr/local/nagios/libexec/check_bgp_neighbors.sh -H xx.xx.xx.49 -C xx.xx.xx.50 And define service{ use server-service hostgroup_name svc-bgp1 service_description BGP Check 1 check_command check_bgp_all!10.0.0.1!172.16.0.2 } to define service{ use generic-service hostgroup_name svc-bgp1 service_description BGP Check 1 check_command check_bgp_all!xx.xx.xx.50 } xx.xx.xx.49 is the IP of the host router and xx.xx.xx.50 is the IP of eBGP neighbour. After that it shows critical status. I know my command is not correct but cannot detect the problem. I learned that in this plug-in user-name and password of the host router are required but don't know how and where to provide it. Nagios log does not show any error message. Status information: Failed: status:0 prefixes:0 sent:0 received:0

  Read the article

• How to connect two subnet with Windows Server?

  - by 9dan

  Hello, I have some work to do in a small office. This office has two separate Internet connections. One is a kind of DSL line and connected through the Internet sharing router (DHCP). One is a leased line with public IP adresses (No DHCP). This leased line provide only 30 IP addresses and the gateway is provided by the ISP. Some workers use private IP provided by the router, some workers use manually setup public IP. There is a Windows 2008 R2 server with two NICs, connected to each lines. I want to connect/merge(?)/bridge(?) two subnet with this server so that users from the different subnet can access each other. How can I accomplish this? Something like, add gateway function to this server and public IP users change the gateway to point this server.. It it possible ? Sorry for my rambling. Thanks in advance.

  Read the article

• Java XHTML Doclet: fatal exception

  - by Cheeso

  Has anyone used XHTML Doclet, and can you provide some hints as to how to get it to work successfully? I run it like this: \sunjdk\bin\javadoc -doclet net.sourceforge.xhtmldoclet.Doclet -docletpath c:\sw\java\XHTML_Doclet_0.4.jar -d <output> [class files here] (all on one line) When I run it I get this: javadoc: error - In doclet class net.sourceforge.xhtmldoclet.Doclet, method validOptions has thrown an exception java.lang.reflect.InvocationTargetException java.lang.Error: Fatal: Resource (net.sourceforge.xhtmldoclet.resources.doclet) for javadoc doclets is missing. at com.sun.tools.doclets.internal.toolkit.util.MessageRetriever.getText(MessageRetriever.java:110) at com.sun.tools.doclets.internal.toolkit.util.MessageRetriever.getText(MessageRetriever.java:92) at com.sun.tools.doclets.internal.toolkit.util.MessageRetriever.getText(MessageRetriever.java:81) at com.sun.tools.doclets.internal.toolkit.Configuration.getText(Configuration.java:634) at com.sun.tools.doclets.internal.toolkit.Configuration.generalValidOptions(Configuration.java:515) at net.sourceforge.xhtmldoclet.Config.validOptions(Unknown Source) at net.sourceforge.xhtmldoclet.Doclet.validOptions(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.sun.tools.javadoc.DocletInvoker.invoke(DocletInvoker.java:269) at com.sun.tools.javadoc.DocletInvoker.validOptions(DocletInvoker.java:198) at com.sun.tools.javadoc.Start.parseAndExecute(Start.java:317) at com.sun.tools.javadoc.Start.begin(Start.java:128) at com.sun.tools.javadoc.Main.execute(Main.java:41) at com.sun.tools.javadoc.Main.main(Main.java:31) 1 error It seems like it ought to just work. What am I doing wrong?

  Read the article

• C++ syntax issue

  - by Doug

  It's late and I can't figure out what is wrong with my syntax. I have asked other people and they can't find the syntax error either so I came here on a friend's advice. template <typename TT> bool PuzzleSolver<TT>::solve ( const Clock &pz ) { possibConfigs_.push( pz.getInitial() ); vector< Configuration<TT> > next_; //error is on next line map< Configuration<TT> ,Configuration<TT> >::iterator found; while ( !possibConfigs_.empty() && possibConfigs_.front() != pz.getGoal() ) { Configuration<TT> cfg = possibConfigs_.front(); possibConfigs_.pop(); next_ = pz.getNext( cfg ); for ( int i = 0; i < next_.size(); i++ ) { found = seenConfigs_.find( next_[i] ); if ( found != seenConfigs_.end() ) { possibConfigs_.push( next_[i] ); seenConfigs_.insert( make_pair( next_[i], cfg ) ); } } } } What is wrong? Thanks for any help.

  Read the article

• What is a 'firewall sniffer'?

  - by Craig Johnston

  What is a 'firewall sniffer'? How do they compromise the security of: Windows firewall Router firewall NAT firewall

  Read the article

• What are the advantages of OSPF vs nexthop self with iBGP?

  - by Matt Hamilton

  Assuming I have a fairly small network internally, but I have 4 routers each connected out to a different network. The routers are all sat next to each other connected via a switch. Each router uses BGP to speak to the outside networks. There is an iBGP mesh for each router to exchange the routes internally it knows about from each external network. The usual setup is to use OSPF to distribute the connected routes, as the routes via iBGP will still have the next hop set to their original value. What is the advantage of using OSPF in this scenario versus simply using 'set nexthop self' on the routes?

  Read the article

• Apple Airport Extreme Wireless Card M8881 Connectivity Issue

  - by Carlosfocker

  I bought a Apple Airport Extreme Wireless Card M8881 with the antenna for my old Power Mac G5 1.6 Ghz. The computer is running OS X 10.4. The card works and I can connect to my dlink 802.11g wireless router using WPA2/AES encryption. The problem is that the connection has intermittent connectivity issues. When the issue occurs the signal bars for the connection drop to one or two bars and the performance of the connection suffers greatly. The computer isn't far from the wireless router. I have a laptop at the desk where the mac is and it does not have any issues. I'm not sure what it might be? Updated drivers? Firmware? Let me know if I forgot any important information.

  Read the article

• Is it possible to refer to metadata of the target from within the target implementation in MSBuild?

  - by mark

  Dear ladies and sirs. My msbuild targets file contains the following section: <ItemGroup> <Targets Include="T1"> <Project>A\B.sln"</Project> <DependsOnTargets>The targets T1 depends on</DependsOnTargets> </Targets> <Targets Include="T2"> <Project>C\D.csproj"</Project> <DependsOnTargets>The targets T2 depends on</DependsOnTargets> </Targets> ... </ItemGroup> <Target Name="T1" DependsOnTargets="The targets T1 depends on"> <MSBuild Projects="A\B.sln" Properties="Configuration=$(Configuration)" /> </Target> <Target Name="T2" DependsOnTargets="The targets T2 depends on"> <MSBuild Projects="C\D.csproj" Properties="Configuration=$(Configuration)" /> </Target> As you can see, A\B.sln appears twice: As Project metadata of T1 in the ItemGroup section. In the Target statement itself passed to the MSBuild task. I am wondering whether I can remove the second instance and replace it with the reference to the Project metadata of the target, which name is given to the Target task? Exactly the same question is asked for the (Targets.DependsOnTargets) metadata. It is mentioned twice much like the %(Targets.Project) metadata. Thanks. EDIT: I should probably describe the constraints, which must be satisfied by the solution: I want to be able to build individual projects with ease. Today I can simply execute msbuild file.proj /t:T1 to build the T1 target and I wish to keep this ability. I wish to emphasize, that some projects depend on others, so the DependsOnTargets attribute is really necessary for them.

  Read the article

• How do I get NHibernate to work with .NET Framework 2.0?

  - by Daniel Dolz

  I can not make NHibernate 2.1 work in machines without framework 3.X (basically, windows 2000 SP4, although it happens with XP too). NHibernate doc do not mention this. Maybe you can help? I NEED to make NHibernate 2.1 work in Windows 2000 PCs, do you think this can be done? PD: DataBase is SQL 2000/2005. Error is: NHibernate.MappingException: Could not compile the mapping document: Datos.NH_VEN_ComprobanteBF.hbm.xml ---> NHibernate.HibernateException: Could not instantiate dialect class NHibernate.Dialect.MsSql2000Dialect ---> System.Reflection.TargetInvocationException: Se produjo una excepción en el destino de la invocación. ---> System.TypeInitializationException: Se produjo una excepción en el inicializador de tipo de 'NHibernate.NHibernateUtil'. ---> System.TypeLoadException: No se puede cargar el tipo 'System.DateTimeOffset' del ensamblado'mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'. en NHibernate.Type.DateTimeOffsetType.get_ReturnedClass() en NHibernate.NHibernateUtil..cctor() --- Fin del seguimiento de la pila de la excepción interna --- en NHibernate.Dialect.Dialect..ctor() en NHibernate.Dialect.MsSql2000Dialect..ctor() --- Fin del seguimiento de la pila de la excepción interna --- en System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandle& ctor, Boolean& bNeedSecurityCheck) en System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean fillCache) en System.RuntimeType.CreateInstanceImpl(Boolean publicOnly, Boolean skipVisibilityChecks, Boolean fillCache) en System.Activator.CreateInstance(Type type, Boolean nonPublic) en NHibernate.Bytecode.ActivatorObjectsFactory.CreateInstance(Type type) en NHibernate.Dialect.Dialect.InstantiateDialect(String dialectName) --- Fin del seguimiento de la pila de la excepción interna --- en NHibernate.Dialect.Dialect.InstantiateDialect(String dialectName) en NHibernate.Dialect.Dialect.GetDialect(IDictionary`2 props) en NHibernate.Cfg.Configuration.AddValidatedDocument(NamedXmlDocument doc) --- Fin del seguimiento de la pila de la excepción interna --- en NHibernate.Cfg.Configuration.LogAndThrow(Exception exception) en NHibernate.Cfg.Configuration.AddValidatedDocument(NamedXmlDocument doc) en NHibernate.Cfg.Configuration.ProcessMappingsQueue() and continues...

  Read the article

• Why ping another inet machine from MacBook get netgate's ip address?

  - by Xinwang

  I have three machine in my home network connected by a wireless router. One is server installed linux at 192.168.1.1, another is Thinkpad with MS Windows XP at 192.168.1.2, last one is MacBook Pro with Mac OS X 10.6.3 at 192.168.1.3. When I ping the Linux Server from Thinkpad (MS Windows XP) I can get the correct ip address, but when I ping it from Mac I get the global address of my router, like 61.135.181.175. Could you tell me why this happen? And how do I get same ping result on Mac and Windows. Thanks

  Read the article

• How to disable 3G USB Modem internal storage from being loaded by linux kernel?

  - by Krystian

  Hi, I've got a problem with my 3G modem [Huawei E122]. It has internal storage and kernel assigns a device [/dev/sdX] to it. Because of that, every second time my machine will not boot - kernel panic - as my usb hdd gets assigned /dev/sdb instead of /dev/sda. I cannot use LABEL nor UUID in root= kernel parameter, as it is only available when using initrd, and I can't use it - I am using Debian on my router - mips architecture machine. I have to prevent this from happening, as my router has to start everyday and I have to be sure it works ok. I don't have physical access to restart it when something goes wrong. I don't use my modem internal storage, there's no SD card inserted. However kernel detects the reader and loads it. I can not prevent loading od usb drivers since my hdd is on USB as well. I will appreciate any ideas.

  Read the article

• How to connect to my US network overseas via VPN?

  - by GiH

  I purchased an Apple TV for my parents and I have a netflix account. My parents live overseas, and I was wondering if they could use my account to get it to work. I read that it won't work unless you use proxies or a VPN, so I was wondering if its possible for me to setup a VPN to my network in the US instead of paying a service like StrongVPN? Setup: Router in US - Airport Extreme Router abroad - D-link (not sure of model) I know that the AppleTV doesn't have a built-in VPN client, maybe eventually when its jailbroken there will be an app, but as of now I'll have to use the routers right? Any other ideas are welcome as well!

  Read the article

• Maven POM: how to insist property is not overridden

  - by Joe Thomas

  I have a parent POM that uses a gmaven script to do some stuff: <plugin> <groupId>org.codehaus.gmaven</groupId> <artifactId>gmaven-plugin</artifactId> <version>1.4</version> <configuration combine.children="override"> <providerSelection>2.0</providerSelection> <scriptPath>${basedir}/build/groovy</scriptPath> </configuration> <executions> <execution> <id>groovy-properties-script</id> <phase>validate</phase> <goals> <goal>execute</goal> </goals> <configuration> <source>computeProperties.groovy</source> </configuration> </execution> <!-- ... --> All of the children are supposed to run this script as well, but they try to resolve the scriptpath based on their OWN basedir. Usually this is exactly what you want with properties, but here it doesn't work, and I can't figure out any way around it.

  Read the article

• Web Development - How to access custom host, defined in my hosts file, from another device in the same network

  - by Neara

  Ok, I hope i'll be able to explain the issue im experiencing. I'm working on a project, that has 2 parts: one takes all requests from usual localhost, the other handles requests from myhost.local. While trying to access both addresses from my computer, it works ok. But now i need to test myhost.local on mobile devices, connected to the same network. Usually i would just run server from my computer ip in the network: python manage.py runserver 10.0.0.8:8000 And then from any device, going to 10.0.0.8:8000 would show the project im working on. However, now accessing that ip address routes me straight to localhost. So, my question is how to access myhost.local from another device in same network? I don't want to change router settings, if that can be avoided, cos sometimes i work from places where i can't access router admin. Is there any network settings on my computer, that i can change to fix the routing to myhost.local w.o losing access to localhost as well?

  Read the article

• Route multiple subdomains on one external ip to multiple internal ips

  - by Abenil

  i have several subdomains(git.example.org, build.example.org, etc.), i have a router with an external ip and i have several virtual machines on a host computer with internal ips. Now i want to route git.example.org to internal ip 10.0.2.1 and build.example.org to internal ip 10.0.2.2. How can I do this? I setup in the Router that all traffic on port 80 is comming to my host computer with internal ip 10.0.2.3 and installed Squid on that computer. I added the following lines to the squid.conf file: cache_peer 10.0.2.1 parent 80 0 no-query originserver name=server_1 cache_peer_domain server_1 git.example.org cache_peer 10.0.2.2 parent 80 0 no-query originserver name=server_2 cache_peer_domain server_2 build.example.org But this is not working for me. :( Any help appreciated. Regards Nils Update: Here is the solution for Apache http://serverfault.com/a/273693

  Read the article

• Cannot connect to apache web server over internet

  - by user1658093

  I can access my apache 2.2 webserver from the lan ( at this case I use local IP aadress ) but I cannot connect externally ( from another network ). I changed apache to listen port 800, forwarded same port from router control panel, turned off windows and router firewalls. I use whatsmyip.com to get IP with what I try to connect. When I'm trying to connect I use : [whatsmyip.com IP]:800. Also, I can ping server IP externally. OS is windows7. Any ideas, suggestions? Thanks

  Read the article

• How should I configure grub for booting linux kernel from a USB hard drive?

  - by skolima

  I have a laptop hard drive in an external enclosure which I use as a large pendrive. For an added twist, I have installed Linux on it, so I can boot any machine with my distribution of choice (e.g. for data recovery or repairing a b0rked system or just using a borrowed laptop without destroying the preinstalled Windows). The problem is that, depending on the hardware configuration, the USB hard drive may be visible under different paths. For grub configuration I just use (hda0,0) as it is relative to the device the grub was launched from. I have UUID entries in /etc/fstab. I also specify rootwait in the kernel parameters so that it waits for the USB subsystem to settle down before trying to mount the device. What should I pass to the kernel as root= ? Currently boot from the pendrive once, check the debug messages to see what /dev/sdX device has been assigned to the USB drive by the kernel, then reboot and edit the grub configuration. I can't change anything on the PC besides enabling Boot from USB hard drive in BIOS and setting it to higher priority than internal hard drives. There are various initrd generating scripts which include support for UUID in root device path, unfortunately the Gentoo native one (genkernel) does not support rootwait and I had no luck trying to use others. The boot process goes like this (it is quite similar in Windows): The BIOS chooses the boot device and loads whatever is its MBR (which happens to be grub stage-1). Grub loads it's configuration and stage-2 files from device it has set as root, using (hd0) for the device it was loaded from by BIOS. Grub loads and starts a kernel (still the same numbering, so I can use (hd0,0) again ). Kernel initializes all built-in devices (rootwait does it's magic now). Kernel mounts the partition it was passed as root (this is a kernel parameter, not grub parameter). init.d starts the userland booting process, including mounting things from /etc/fstab. Part 5 is the one giving me problems.

  Read the article

• Comunication from Server to Client + Client LAN

  - by Filipe YaBa Polido

  I'm having some trouble with some network setup. I've tried OpenVPN, SocialVPN, Hamachi, still it is not working. This is my setup: Server A: NIC 1 with internet public address, NIC 2 to LAN Client B PC: NIC 1 (192.168.10.2) connects to router 192.168.10.1 Client B Device: 192.168.10.3 (Configured via software, can't do much here) Problem: Server A must connect to cliente device B. (I can install software needed at Client B PC). However... I can't change the router to some model with VPN like Draytek or Cisco :( OpenVPN fails at bridging, PC B can ping Server A, but Server A can't ping Device B, only PC B. What else can I do?!?!?

  Read the article

• Remote desktop to multiple windows machines on a LAN with dynamic IP

  - by kevyn

  Is it possible to use remote desktop to connect to multiple computers inside a network that has a dynamic IP address? I use a netgear WPN824 router which has dyndns onboard - but I currently use No-IP to control a single computer that I use most frequently. Every so often I need to get onto a couple of other computers in the network, but don't know how to go about this without logging onto one computer, and then starting another RDC session from that machine. What I would like to be able to do is connect to my router, and be able to see a list of connected devices, and then choose which to remote desktop onto. - I appreciate this probably is not be possible, but any other suggestions are welcome!

  Read the article

• How to connect to my US network overseas via VPN?

  - by GiH

  I purchased an Apple TV for my parents and I have a netflix account. My parents live overseas, and I was wondering if they could use my account to get it to work. I read that it won't work unless you use proxies or a VPN, so I was wondering if its possible for me to setup a VPN to my network in the US instead of paying a service like StrongVPN? Setup: Router in US - Airport Extreme Router abroad - D-link (not sure of model) I know that the AppleTV doesn't have a built-in VPN client, maybe eventually when its jailbroken there will be an app, but as of now I'll have to use the routers right? Any other ideas are welcome as well!

  Read the article

• Jumbo Frames on DIR-655

  - by Spookyone

  Hello, I am trying to set up jumbo frames on my gigabit home LAN but no luck so far. My setup is: D-Link DIR-655 router, HW Revision A3, Firmware 1.21 EU Synology DS107+, Firmware 3.0-1337 Laptop w/ Win7 x64, external PCIx NIC managed by "Generic Marvel Yukon 88E8053 based Ethernet Controller" The router is supposed to support jumbo frames but doesn't feature any relevant setting. I set the Jumbo Packet value to 9000 on both the NIC and the Synobox but it doesn't work, ping -f -l 8972 says "Packet needs to be fragmented but DF set". Is there any other setting I overlooked, the DIR-655 doesn't actually support jumbo frames, or what else could be the problem?

  Read the article

• No Internet for Created VLan on Cisco CE500

  - by Jennifer

  I'm new here and also with networking but i can't set internet conection for some vlan created. I have a Cisco CE500 switch and created 4 vlans define by the roles in the switch. Vlan 2: Servers (role) (port 3-4) Vlan 3: Desktop (role) (port 5-8) Vlan 4: Guest (role) (port 9-12) Vlan 1 is default, Connect to the ADSL Modem/Router Port 2 assign to the Router Role (vlan 1) The switch is connected on port2 the ADSL Modem (DHCP) 192.168.2.254 The goal is: All Vlan should have internet connection. Vlan 2 and 3 should see each other but not Vlan 4 I can enter the switch CLI but dont know which command to enter. Thanks 4 ur time and replies Jennifer

  Read the article

• No internet on some devices, still on WiFi

  - by Joost

  Ok, here's the situation. I live with 3 friends, and we often sit in the living room with laptops out. There's a WiFi router in the kitchen, and we have quite a stable connection. The issue, however, is this: sometimes, all of a sudden one of my friends loses internet connection. Even disconnecting/reconnecting to the WiFi network does not help. When we restart the router, though, it works like a charm again. The odd thing is, it happens just for this one Windows 7 laptop. We've switched routers (for a different reason) in the mean time, but the issue remained. This makes me suspect the laptop even more. I realise I've given little details, but I don't really know what to try/do. Any suggestions what it might be?

  Read the article

• Netgear genie says my Internet is off, while Windows claims I am connected

  - by Manu

  I'm connected via wifi to my ISP's router/modem. While Windows says that I'm always connected, I keep getting messages from Netgear Genie that I've lost contact to the Internet, and I cannot access webpages until it comes back. There are two other computers in the house, one connected to the router via ethernet, the other via wifi, both seem to have no such problems. I've wondered if Netgear genie itself was the problem, but I am regularly disconnected even if I uninstall it. And I'd rather have it since it accurently tells me if I'm connected or not. Why does windows says I'm online if I can't access any online game, or website ? Is "netgear genie" the problem ? I've removed the connection, recreated it, I've even copied the settings to a usb key from the computer that has wifi access.

  Read the article

< Previous Page | 205 206 207 208 209 210 211 212 213 214 215 216  | Next Page >