Search Results

Search found 9758 results on 391 pages for 'wireless networking'.

Page 209/391 | < Previous Page | 205 206 207 208 209 210 211 212 213 214 215 216  | Next Page >

• Gmail outage only on one computer

  - by user123079

  Problem: Gmail (and only Gmail) quits working for a period of 5-10 mins only on one computer. Problem occurs several times daily Does not appear to be any "triggering event" - user is simply using Gmail normally when the problem arises User can access their Gmail from other computers on same LAN User can access all other sites, including other Google sites, from affected computer After several mins of outage, Gmail will spontaneously resume normal operation on affected computer The problem occurs in all browsers (Chrome, FF, Safari) Computer: MacBook Pro, OSX 10.7.3, latest browsers I find this very baffling. Any advice welcome.

  Read the article

• Discovering proxy servers on a private network

  - by AIB

  Suppose that I am in a private network of computers (say each having ip addresses 192.168.. ). Some of the machines( we have no information regarding their ip, name and no physical access to the servers) in the network are connected to internet and they run an http proxy at some port say 3128. Is there a program which can be run on Windows or Linux which will give me the list of machines(ip addresses and ports if possible) acting as proxy servers?

  Read the article

• Network Drivers

  - by Jason

  I have a motherboard that says: DA0S20MB6F2 on it, it was an in an iron port box. I cant get Windows to see the NICS on it. Google searching doesn't help me find drivers. Anybody have thoughts?

  Read the article

• How to get all IPs of a domain?

  - by DenMark

  How can I get all IPs of a domain name, say, www.google.com? Of course, nslookup and host command will give me IPs of a domain. But what shall I do if I want a list ALL (or, at least a lot more than just one or two..) IPs of that domain?

  Read the article

• Netgear router is not resolving hostnames

  - by Thomas Clayson

  Not sure what the problem is, but I am used to being able to access other clients on my LAN via their hostname. We got a new router from plusnet (Netgear WNR1000v3) and now this has stopped working. For instance, if I were to run a web server from one computer with the hostname TomPC usually I could go into a browser and type http://TomPC and I would get the web server front page. I can access it by using the LAN ip of the machine. e.g. http://192.168.1.1 works fine. I thought it would be a simple option in the admin panel of the router - possibly I had to turn on DNS/DCHP or something. But I can't see anything, and my searches on the internet seem to turn up ridiculous solutions involving setting up a dedicated DNS server on my LAN. This is just a small home network - really I just want to be able to access my Raspberry PI on the network without having to work out the IP address every time. (I know I could just set a static IP address for it, but using its hostname would be much easier). DCHP is enabled in the LAN settings part, although RIP is disabled (I don't know what the latter is) I don't know if this has anything to do with it? Many thanks!

  Read the article

• How to route packets from Wi-Fi to Ethernet on OSX?

  - by Alexander Artemenko

  I have a trouble, configuring a home network. Here is how my devices are connected together: Internet     ? Wi-Fi Router ? MacBook     ? iMac ?ethernet cable? Synology NAS I have no ability to plugin NAS right into the Wi-Fi router. The problem is that MacBook does not see NAS, because they are in different networks — I configured Wi-Fi Router to serve 192.168.10.0/24 addresses, and configured iMac's ethernet connection to use 192.168.20/24 network. Is there a way to setup route from MacBook to the NAS?

  Read the article

• Why does my Mac address reset after reconnecting?

  - by Mr.Student

  I have ubuntu 12. I'm changing my mac address with ifconfig wlan0 hw ether xx:xx:xx:xx:xx:xx which works. However when I restart my connection my computer resets my mac to my original mac address. I'm guessing that this happens because something calls... ifconfig wlan0 down ... do something before connecting ifconfig wlan0 up ... connect to designated access point I want my mac address to however be the same no matter how many times I disconnect and reconnect, whether to another network or the same one. Also it would be nice to turn off the auto-connect feature for my network-manager with out having to edit each individual connection. Lastly I would like to know how to connect to a wifi network through the terminal and not via gui network manager ubuntu provides.

  Read the article

• hybrid cable for QSFP to CX4 convertion

  - by John-ZFS

  here is a hybrid cable for QSFP to CX4. Will this fit SFP+ ports? Deeply confused by standards and struck in a situation with wrong hardware selection!Personally have not seen the ports/hardware and hence the obviously stupid question! thanks for stopping by and bearing with me. http://www.cablesondemand.com/pcategory/72/category/QSFP+-+CX4/URvars/Catalog/Library/InfoManage/QSFP_TO_CX4_COPPER_CABLES.htm

  Read the article

• how to install Wimax Dongle over Ubuntu?

  - by Mosh

  i have Asus Wimax Dongle and it has an Independence software from the Asus company requires user name and password and its running will over windows 7 now i've tried ubuntu 10.10 but nothing happens when i plug the dongle into usb. in windows if you plugs it for the first time, an application wizard begins and you can find a virtual cd in my computer but i cant find it in Ubuntu now i would install it over ubuntu, how? toast for all

  Read the article

• Cisco redundancy modes

  - by user974896

  I am using a Cisco 6500 series with an SSO redundancy configuration. The show redundancy output is as follows: Hardware Mode = Duplex Configured Redundancy Mode = sso Operating Redundancy Mode = rpr Maintenance Mode = Disabled Communications = Up I would assume the device is operating in RPR mode although SSO is configured. What could cause this? Shouldn't the operating mode be SSO? EDIT (show redundancy states): my state = 13 -ACTIVE peer state = 4 -STANDBY COLD Mode = Duplex Unit = Primary Unit ID = 5 Redundancy Mode (Operational) = rpr Redundancy Mode (Configured) = sso Redundancy State = rpr Split Mode = Disabled Manual Swact = Enabled Communications = Up client count = 60 client_notification_TMR = 30000 milliseconds keep_alive TMR = 9000 milliseconds keep_alive count = 1 keep_alive threshold = 18 RF debug mask = 0x0

  Read the article

• No internet on some devices, still on WiFi

  - by Joost

  Ok, here's the situation. I live with 3 friends, and we often sit in the living room with laptops out. There's a WiFi router in the kitchen, and we have quite a stable connection. The issue, however, is this: sometimes, all of a sudden one of my friends loses internet connection. Even disconnecting/reconnecting to the WiFi network does not help. When we restart the router, though, it works like a charm again. The odd thing is, it happens just for this one Windows 7 laptop. We've switched routers (for a different reason) in the mean time, but the issue remained. This makes me suspect the laptop even more. I realise I've given little details, but I don't really know what to try/do. Any suggestions what it might be?

  Read the article

• How can the route between two private IPs go via public IPs?

  - by Gilles

  I'm trying to understand what this output from traceroute means. I changed the IP addresses for privacy but retained the public/private IP range distinction. traceroute.db -e -n 10.1.1.9 traceroute to (10.1.1.9), 30 hops max, 60 byte packets 1 10.0.0.1 0.596 ms 0.588 ms 0.577 ms 2 10.0.0.2 1.032 ms 1.029 ms 1.084 ms 3 10.0.0.3 3.360 ms 3.355 ms 3.338 ms 4 23.0.0.4 3.974 ms 4.592 ms 4.584 ms 5 23.0.0.5 13.442 ms 13.445 ms 13.434 ms 6 45.0.0.6 13.195 ms 12.924 ms 12.913 ms 7 67.0.0.7 52.088 ms 51.683 ms 52.040 ms 8 10.1.1.8 46.878 ms 44.575 ms 44.815 ms 9 10.1.1.9 45.932 ms 45.603 ms 45.593 ms The first 10.0.* range is inside my organisation. The last 10.1.* range is another site of my organisation. The intermediate addresses belong to various ISPs. I expect that there is some kind of VPN between the two sites, but I don't know much about our network topology. What I don't understand is how the route can go from a private address through public addresses back into private addresses. Searching led me to Public IPs on MPLS Traceroute, which gives a possible explanation: MPLS. Is MPLS the only possible or most likely explanation? Otherwise what does this tell me about our network infrastructure? Bonus question for my edification: in this scenario, who is generating the ICMP TTL exceeded packets and if relevant mangling their source and destination addresses?

  Read the article

• How to connect two subnet with Windows Server?

  - by 9dan

  Hello, I have some work to do in a small office. This office has two separate Internet connections. One is a kind of DSL line and connected through the Internet sharing router (DHCP). One is a leased line with public IP adresses (No DHCP). This leased line provide only 30 IP addresses and the gateway is provided by the ISP. Some workers use private IP provided by the router, some workers use manually setup public IP. There is a Windows 2008 R2 server with two NICs, connected to each lines. I want to connect/merge(?)/bridge(?) two subnet with this server so that users from the different subnet can access each other. How can I accomplish this? Something like, add gateway function to this server and public IP users change the gateway to point this server.. It it possible ? Sorry for my rambling. Thanks in advance.

  Read the article

• NIC is receiving, but not transmitting at all?

  - by Shtééf

  I'm trying to fix a very strange problem remotely on a machine at a customer site. The machine is a Dell PowerEdge, I believe a 1950 (haven't verified, but the lspci output matches specs I found.) The machine has two similar NICs, identified as Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12) by lspci, and using the bnx2 driver. (I suspect these are on-board and on the same controller, which is what I'm accustomed to for this type of machine.) The primary interface eth0 works perfectly, and is in fact how I am ssh'd in. However, the secondary interface eth1 is not transmitting. I can see this in ifconfig output, for example, where the TX field is always 0. However, it is receiving, and tcpdump shows ARP requests coming from the ISP's gateway on the other side. The interface is physically connected to a Siemens BSTU4 modem, configured by the ISP. The link is properly set to 10MBps and full duplex, without negotation, as the ISP requested. A small /30 subnet is configured. For the sake of anonimity, let's say the machine is 3.3.3.2/30, and the ISP's gateway .1. The machine has no firewall settings whatsoever. Even running something like arping -I eth1 3.3.3.1, and running tcpdump alongside, shows no traffic whatsoever being transmitted on the interface. (But the other side keeps steadily sending ARP requests, and that is all that can be seen.) What could be causing this? Here's some output, anonymized, which may hopefully help: $ ethtool eth1 Settings for eth1: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: Not reported Advertised auto-negotiation: No Speed: 10Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: off Supports Wake-on: d Wake-on: d Link detected: yes $ ip link show eth1 3: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:15:c5:xx:xx:xx brd ff:ff:ff:ff:ff:ff $ ip -4 addr show eth1 3: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000 inet 3.3.3.2/30 brd 3.3.3.3 scope global eth1 $ ip -4 route show match 3.3.3.0/30 3.3.3.0/30 dev eth1 proto kernel scope link src 3.3.3.2 default via 10.0.0.5 dev eth0

  Read the article

• How to make my computer accessible anywhere

  - by Devoted

  Hi, How can I make my computer accessible anywhere (via SSH preferably). I have Ubuntu installed on it. Or Is there a way to set up dyndns.com using dynamic IP without any router changes?

  Read the article

• How do I purge or empty Windows Explorer's network username and sharename cache?

  - by Abel

  While troubleshooting a Samba vs Windows Network issue, I noticed that Windows' Explorer remembers login credentials of remote shares, even if you ask it not to. For instance, after accessing a share using \\servername\sharename plus entering username/password and then closing Windows Explorer, adding the same share as a network drive gives the following message, regardless whether the username is the same or not: The network folder specified is currently mapped using a different user name and password. To connect using a different user name and password, first disconnect any existing mappings to this network share. Using NET USE does not show the share. After restarting the computer, I have no problems accessing the share using different credentials. But restarting just for testing other credentials is annoying, esp. while troubleshooting. How can I purge this cache, using Windows Vista? Note: using nbtstat -R[R], ipconfig /renew, killing explorer.exe or disabling / re-enabling the network card didn't help.

  Read the article

• Wi-fi signal with keeping the internet cable

  - by daGrevis

  So the situation is that I have Ethernet cable which provides internet to my computer. Thing I want is to have wi-fi connection in my house and Ethernet cable (like I have before) to use for my PC. I will use wi-fi for my laptop and mobile phone. I think I need router for that and I'm looking at Asus RT-N16 (suggested in Coding Horror) for it, but I am not sure. Is it the right thing for me and I will be able to get wi-fi signal and keep the Ethernet cable? I guess the system will be that current cable goes into router, router provides wi-fi signal and gives back new cable... or something like that. Thanks in any advice! And sorry if topic isn't in right site.

  Read the article

• Network load balancing, efficience and limits?

  - by Vimvq1987

  I'm about to study about NLB on Windows Server 2003. It archives both of my interests now: scalability and high-availability. But I don't know about its power in production environment. Is NLB a efficient solution? How does it implement in real-world? Is it popular? What are its limit? Thank you so much for answering my questions. :)

  Read the article

• Different external ip addresses from different sites

  - by user630286

  My router is ClearOS 6(Centos 6). In my router, I have two external (internet) network connections from two ISP's. The primary connection is eth2 connected to a cable modem and the second one is ppp0 connected to a dsl modem. I have assigned eth2 as the primary connection (with a high metric value). In fact this is done through clearos's multiwan web interface. I have a test in my Nagios to monitor whether the primary connection. This connection is done based on the result of curl ifconfig.me But it seems that ifconfig.me is always giving the ip address of my secondary connection. I tested it through a browser. Yes ifconfig.me gives the secondary internet's(ppp0) ip address. But whatismyipaddress.[com|org] give my primary ip address (eth2). I checked the default route on the router through ip route list 0/0 which also shows the primary connection (eth2) as the default route. The traceroute www.google.com and traceroute ifconfig.me both seems to trace through the primary connection (eth2). As our secondary internet connection has only got a limited download, I don't want to end up having to pay a large sum at the end of the month. Has somebody got an idea why the ifconfig.me shows my secondary address? What is the best way to ensure that my router(and thus the lan) use the right internet connection.

  Read the article

• Untangle VPN setup, how to see internal addresses?

  - by NFS user

  So Untangle is setup as the default gateway at 192.168.100.1/24, it is the authorative DHCP server issuing addresses from 192.168.100.100 to 192.168.100.200 and is successfully connected to the Internet. Untangle uses OpenVPN for remote access. Accessing the VPN gives me the address 192.168.40.5. However, I cannot ping any machines on the internal 192.168.100.x network remotely. Clearly, there is something basic that I am missing. What is it and how is it solved? Update: The VPN was not setup with the internal network. Since Untangle only allows editing the VPN setup once, the VPN had to be removed and reinstalled with the internal network exported. Now it works. The lesson is that the internal network must be setup before configuring the VPN.

  Read the article

• Which routers do you prefer for DD-WRT or OpenWRT?

  - by hyperslug

  I'm aware of the giant Supported Devices list. I'm wondering which ones you all prefer (e.g., support for Mega install, cheap, reliable hardware, USB port, etc.) I've used an ASUS WL-500G Premium for 1.5 years, but I've been eyeballing the WL-520gU recently.

  Read the article

• Network on linux server is periodically down

  - by Fabian

  I have an old server running Fedora 4 that occasionally just stops responding via network for about an hour. This happens 1-2 times a week. Also no connection from the server itself to any other computer on the network is possible when it happens. The network settings and routes look fine. There are no unusual log messages and no unusual processes running at that time. If I restart the network or just do an ifconfig eth0 down & ifconfig eth0 up it works fine afterwards. I know that the server should be updated to a currently supported OS, but that is not really an easy option right now. Any ideas on how I could diagnose and fix that problem?

  Read the article

• Variable TTL inside a LAN

  - by user140783

  I recently discovered that ping my local router, returns different TTL values??. The ping 3 switch must pass through before reaching the router, there may be the problem? 192.168.1.99 is the IP of my router , a Cisco WRT120N Thank you! Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=190 Respuesta desde 192.168.1.99: bytes=32 tiempo=29ms TTL=3 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=117 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=131 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=66 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=66 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=66 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=111 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=240 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=66 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=66 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=66 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=51 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=190 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=66 Traceroute G:\Documents and Settings\Administrador>tracert 192.168.1.99 Traza a la dirección maxi2011 [192.168.1.99] sobre un máximo de 30 saltos: 1 <1 ms <1 ms <1 ms maxi2011 [192.168.1.99] Traza completa. G:\Documents and Settings\Administradorping 192.168.1.99 Haciendo ping a 192.168.1.99 con 32 bytes de datos: Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=190 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=190 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=117 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=117 Estadísticas de ping para 192.168.1.99: Paquetes: enviados = 4, recibidos = 4, perdidos = 0 (0% perdidos), Tiempos aproximados de ida y vuelta en milisegundos: Mínimo = 0ms, Máximo = 0ms, Media = 0ms G:\Documents and Settings\Administrador

  Read the article

• How to make Windows 7 Network show Samba share after VM is rebooted/restored?

  - by lackey

  On Windows 7, I have VirtualBox running Linux (Ubuntu 8.04), with Samba set up so that the Windows host can access it. But if the virtual machine is shut down & restored, or rebooted, the Windows Network no longer shows it. I've tried refreshing many times, restarting Samba, disabling/enabling the virtual network adapter, and running the succession of commands ipconfig /release, ipconfig /flushdns, & ipconfig /renew, but none worked. As a last resort I could restart the host itself, but is there a better way?

  Read the article

• Domain user cannot connect to Exchange

  - by Jeff

  I can login to the local PC and connect to Exchange server - on the same physical network if i log into the domain i cannot connect to the Exchange server. DNS / DHCP all functioning as expected. User has AD account with Domain Admin rights. Quite confusing!

  Read the article

< Previous Page | 205 206 207 208 209 210 211 212 213 214 215 216  | Next Page >