Search Results

Search found 27649 results on 1106 pages for 'ask how to geek'.

Page 211/1106 | < Previous Page | 207 208 209 210 211 212 213 214 215 216 217 218 | Next Page >

Audio not working

- by user3215

Anybody could help me in troubleshooting audio problem on ubutnu 9.04 desktop edition?. For some reason I've to keep this os not upgraded and I'm trying to fix the audio problem on this for months. It works well on upgraded version(9.10,10.04) but not on jaunty. aplay -l: **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC883 Analog [ALC883 Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: ALC883 Digital [ALC883 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 lsmod | grep snd: snd_hda_intel 436148 7 snd_pcm_oss 46336 0 snd_mixer_oss 22656 1 snd_pcm_oss snd_pcm 83076 4 snd_hda_intel,snd_pcm_oss snd_seq_dummy 10756 0 snd_seq_oss 37760 0 snd_seq_midi 14336 0 snd_rawmidi 29696 1 snd_seq_midi snd_seq_midi_event 15104 2 snd_seq_oss,snd_seq_midi snd_seq 56880 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_timer 29704 2 snd_pcm,snd_seq snd_seq_device 14988 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq snd 62756 21 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 15200 1 snd snd_page_alloc 16904 2 snd_hda_intel,snd_pcm cat /proc/asound/cards: 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xe1280000 irq 16 cat /proc/asound/version: Advanced Linux Sound Architecture Driver Version 1.0.18rc3. vim /etc/modules: # /etc/modules: kernel modules to load at boot time. # # This file contains the names of kernel modules that should be loaded # at boot time, one per line. Lines beginning with "#" are ignored. lp Audio Settings:

Read the article
Insufficient permissions within Eclipse when installed via synaptic in Ubuntu 12.04

- by Clayton

I installed Eclipse via the Synaptic Package Manager on Ubuntu 12.04 Desktop (more details on footer). However, from within Eclipse, I lack sufficient permissions to perform upgrades on my package and add-ons. I'm a recovering Windows user, and while I have a couple of years Ubuntu experience, I am unfamiliar with the command-line and mainly interact through the packaged GUI. Specifically, I am trying to install the upgrade for Eclipse CVS Clientorg.eclipse.cvs.feature.group1.3.100.v20110520-0800-7B78FHl9VF7BD7KBM4GP9C I am tracking the varying installation advice on a similar question eclipse install: Gaurav Butola Basically, the most current upgrades are available directly from eclipse?... But at some point I remember reading that the latest version of eclipse had been designed for the previous LTS of Ubuntu - I don't know if that is still true. I have read about the vulnerabilities of Java 6, and so I have gone with Open Java 7 openjdk-amd64 (if that has any relevance to which Eclipse package and installation method I choose). But I'm not crazy about the idea of creating a gksudo link in the sidebar launcher. I don't know enough about chown to use it - if that's even appropriate (I don't want stray java escaping from Eclipse and connecting to SkyNet). Another possible solution that I foresee is modifying my user's group memberships/privileges on the file system as a whole. The only other information that I think might be relevant is that I notice that Synaptic installed all of the files into /usr/ instead of /opt/ like I have seen recommended. So should I be changing ownership, reinstalling using a non-Synaptic method, or what? Any advice is greatly appreciated. Ubuntu information Ubuntu 12.04 LTS Memory 2.9 GiB Processor AMD Sempron(tm) Processor LE-1300 Graphics VESA: XXXXXXX OS type 64-bit Eclipse Version: 3.7.2 Build id: I20110613-1736 Ubuntu Developers :/usr/share$ ls -h -l drwxr-xr-x 5 root root 4.0K Sep 13 08:43 eclipse Install paths: /. /usr /usr/share ...

Read the article
Best partition Scheme for Ubuntu Server

- by K.K Patel

I am going to deploy Ubuntu server having Following servers on it Bind server, dhcp server, LAMP Server, Openssh Server, Ldap server, Monodb database, FTP server,mail server, Samba server, NFS server , in future I want to set Openstack for PAAS. Currently I have Raid 5 with 10TB. How should I make my Partition Scheme So never get problem in future and easily expand Storage size. Suggest me such a partition Scheme with giving specific percentage of Storage to partitions like /, /boot, /var, /etc. Thanks In advance

Read the article
Kernel Panic: line 61: can't open /scripts/functions

- by Pavlos G.

I'm facing a problem with all the kernels installed at my system (Ubuntu 10.10 64-bit). Installed kernel versions: 2.6.32-21 up to 2.6.35.23. The booting halted with the following error: init: .: line 61: can't open '/scripts/functions' Kernel panic - not syncing: Attempted to kill init! Pid: 1, comm: init not tainted Only the first one (2.6.32-21) was working up until know. I asked for help at ubuntuforums.org and i was told to check if there's any problem regarding my graphics card (ATI Radeon). I uninstalled all the ATI-related packages as well as all the unecessary xserver-xorg-video-* drivers that were installed. I then rebooted and from then on ALL of the kernels halt with the same error (i.e. it didn't fix the problematic kernels, it just broke the only one that was working...) Any ideas on what i should try next? Thanks in advance. Pavlos.

Read the article
Cannot delete .Trash-503 directory, returns a $RECYCLE.BIN.trashinfo: Input/output error

- by Parto

I cannot delete .Trash-503 folder via GUI or terminal, it returns a $RECYCLE.BIN.trashinfo: Input/output error Not even sudo rm -r or even a simple ls works in that trash directory. Check terminal output below: subroot@subroot:~$ cd /media/xxxxx/ subroot@subroot:/media/xxxxx$ rm .Trash-503/ rm: cannot remove `.Trash-503/': Is a directory subroot@subroot:/media/xxxxx$ rm -r .Trash-503/ rm: cannot remove `.Trash-503/info/$RECYCLE.BIN.trashinfo': Input/output error rm: cannot remove `.Trash-503/info/found.000.trashinfo': Input/output error rm: cannot remove `.Trash-503/info': Directory not empty subroot@subroot:/media/xxxxx$ sudo rm -r .Trash-503/ [sudo] password for subroot: rm: cannot remove `.Trash-503/info/$RECYCLE.BIN.trashinfo': Input/output error rm: cannot remove `.Trash-503/info/found.000.trashinfo': Input/output error subroot@subroot:/media/xxxxx$ cd .Trash-503/ subroot@subroot:/media/xxxxx/.Trash-503$ ls info subroot@subroot:/media/xxxxx/.Trash-503$ cd info/ subroot@subroot:/media/xxxxx/.Trash-503/info$ ls ls: cannot access $RECYCLE.BIN.trashinfo: Input/output error ls: cannot access found.000.trashinfo: Input/output error found.000.trashinfo $RECYCLE.BIN.trashinfo subroot@subroot:/media/xxxxx/.Trash-503/info$ What's going on here and how can I delete this folder? EDIT I tried checking and repairing the partition using gparted only to get this error message: ERROR: Filesystem check failed! ERROR: 264 clusters are referenced multiple times. NTFS is inconsistent. Run chkdsk /f on Windows then reboot it TWICE! The usage of the /f parameter is very IMPORTANT! No modification was and will be made to NTFS by this software until it gets repaired. I don't have windows installed, how can I run chkdsk /f from ubuntu?

Read the article
Recover files in Ubuntu from USB stick

- by Jon

I have Ubuntu 11.04 running from a USB stick. I think I ran some updates in terminal and now it has a kernel panic during boot up. Is there a way I can get hold of files I saved when Ubuntu was working? I just managed to watch the booot screen and it looks as if there are some errors saying there is no room to write to disk however my USB stick has 5GB free UPDATE: Here is what I see when I plug the USB stick into Windows

Read the article
How to get pngcrush to overwrite original files?

- by DisgruntledGoat

I've read through man pngcrush and it seems that there is no way to crush a PNG file and save it over the original. I want to compress several folders worth of PNGs so it would be useful to do it all with one command! Currently I am doing pngcrush -q -d . *.png then manually cut-pasting the files from the tmp directory to the original folder. So I guess using mv might be the best way to go? Any better ideas?

Read the article
Make Network Manager use bridge for PPPoE instead of only working on ethernet?

- by Azendale

My ISP uses PPPoE on their DSL connections. I use Network Manager to connect to this using a bridged modem connected to eth0. Often, I want to test networking things, so a set myself up a KVM machine with a tap interface. I can then connect these interfaces to to virtual 'switches' by adding them to bridges. (I work for my ISP). Sometimes, I want to test cases where the PPPoE is connected more than once. For this, I would like to be able to add eth0 to my 'switch' (a bridge) so the VMs can have a 'bridged modem' connection to the internet. But I would like to still be able to run the PPPoE for my computer at the same time. Which means that I need to get network-manager to run PPPoE over the bridge (or eth0). The problem is that it considers eth0 (and the bridge) 'not managed' by network manager, so it refuses to use it. So, how can I have network manager dial PPPoE over a bridge?

Read the article
How do I enable the globalmenu / appmenu on XFCE?

- by Johann Philipp Strathausen

I have tried various tricks I could find to install the global menu on xfce and lxde on the latest oneiric, but nothing worked. Does anyone have an idea on how to do that? Thanks. Here's what I've tried so far: the gnome global menu panel plugin (for lucid) via the xfapplet plugin (not in the official repos anymore) that can embedd gnome plugins into the xfce panel - unfortunately, the globalmenu doesn't show up in the xfapplet list of available gnome plugins (there's only one item in it) all instructions from an older question about globalmenu and its duplicate compiling manually the latest version from gnome2-globalmenu there is another question along with a solution for XFCE 4.8, but it's not working on Oneiric. It is also proposing to install the global menu applet from gnome using it via xfapplet. I've even found an XFCE-plugin for the global menu, but it keeps crashing when I add it to the panel - also I could not install all the packages due to some unmet dependencies I've added some code to ~/.config/xfce4/xinitrc as described in 10. of the FAQ of gnome2-globalmenu though I'm not sure what effect this should have.

Read the article
KDE not loading without nomode tag in grub and bad resolution [migrated]

- by fcole90

I recently installed Linux Mint 13 KDE but it's not working fine. At first I had to use failsafe mode to boot because normal boot takes to a textual login. If I use normal boot and text login I'm not able to run KDE nor with kdm start neither with startx. kdm says that's already running. Instead X is not able to run because can't connect Xserver to display. If I stop kdm and starx again doesn't change anything. Now I edited the grub to load in nomode. In that way KDE loads but resolution is wrong and xrandr doesn't help, because if I do this: cvt 1366 768 it changes it to 1368: # 1368x768 59.88 Hz (CVT) hsync: 47.79 kHz; pclk: 85.25 MHz Modeline "1368x768_60.00" 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync I also installed bumblebee and nvidia drivers because of optimus technology.. It worked just to have fun with glxspheres but there isn't any gain on KDE.. This is lspci output: fabio@fabio-EasyNote-TS11HR ~ $ lspci |grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 540M] (rev ff My notebook is an EasyNote TS with NVIDIA GeForce GT 540M. Thank you in advance to anyone that may help!

Read the article
Doesn't installing "All locales" install necessary fonts too?

- by its_me

I recently noticed that my browsers rendered blank text (or invisible text?) on some websites in foreign languages, like Chinese. inside.com.tw, for example. Later I learnt that by default Debian only installs one locale (the one you choose during the installation process), and others need to be installed manually. So, I ran the command: # dpkg-reconfigure locales And selected All locales from the options screen that followed, and proceeded with the rest of the process, which also includes changing the default locale (which I set to en_US.UTF-8). Then I restarted my system. I still can't read the website that I mentioned earlier (inside.com.tw). Most of the text is blank, i.e. invisible. With the page translated by Chrome to my default language (en_US), the text is visible; BUT not in the original language. Why is this happening? Does this mean that installing locales isn't actually necessary, and all I have to do is install the fonts for all supported languages? If so, how do I install all the fonts necessary for All locales? UPDATE: An easy fix is to install the unifont package which adds support for all Unicode 5.1 characters. But the rendering is of very bad quality. So, how I install all font packages? I notice that there are three sets, ones starting with fonts-*, another with xfonts-*, and ttf-*? Which set should I exactly go with, and how do I install that set of fonts. Looking for a knowledgeable solution.

Read the article
Sound problems in Unity - input but no output

- by ana

I am new to Ubuntu, having just installed it for the first time on my Lenovo Thinkpad. Since I installed it I have no sound output whatsoever. However, I can see from the graphical interface in Sound Preferences Input that the sound input appears to be working correctly. I have tried the following: https://help.ubuntu.com/community/HdaIntelSoundHowto https://wiki.ubuntu.com/Audio/InstallingLinuxAlsaDriverModules ubuntu-bug audio I have two sound cards, cat card0/codec* | grep Codec Codec: Conexant CX20585 Codec: Conexant ID 2c06 cat card1/codec* | grep Codec Codec: Nvidia GPU 0b HDMI/DP Codec: Nvidia GPU 0b HDMI/DP Codec: Nvidia GPU 0b HDMI/DP Codec: Nvidia GPU 0b HDMI/DP And now have pretty much run out of ideas. Can anybody help?

Read the article
Questions about Mac Book Pro Keyboard and shortcuts

- by SimonSolnes

I have been researching a lot about this and I cannot seem to find any useful information about this topic, what so ever. I have now been using Ubuntu in one week, and have gotten pretty confident with almost everything. Except keyboard layout and shortcuts. If you know a tutorial or a documents explaining keyboard shortcuts in Ubuntu or linux in general, can you please list it? I use a Mac Book Pro with a Norwegian keyboard, and I have several questions about this: Is there a program for having a consise list of absolutely all keyboard shortcuts, and be able to change them? How do I use my fn keys? (fn button doesnt do the job for some reason) How can I use my alt+letter-key-or-number-key or alt+shift+letter-key-or-number-key to get fancy characters. (Like I do on Mac OS X) How can I swap cmd and ctrl key system wide? Also I really want to be oriented around this subject, since this is the only thing holding me back on Ubuntu, so if there exists some in-depth material on this, it would be great. Also, if there exists some programs or material out there making it easier with Mac hardware I would enjoy that. Sorry if my questions seems vague. Thank you very much Simon

Read the article
Error while upgrading

- by arun

When i have select to install updates from the update manager it says: Failed to fetch http://us.archive.ubuntu.com/ubuntu/pool/main/l/linux/linux-image-3.0.0-13-generic_3.0.0-13.22_i386.deb Size mismatch I have tried several times and through terminal too but the size mismatch repeats itself there too. What is this size mismatch error ? Please Help ? tried sudo apt-get update and the sudo apt-get upgrade but the again error comes:: Failed to fetch http://us.archive.ubuntu.com/ubuntu/pool/main/x/xserver-xorg-video-intel/xserver-xorg-video-intel_2.15.901-1ubuntu2.1_i386.deb Size mismatch E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?

Read the article
Why ubuntu 12.04 Operating System too slow..?

- by Sumit Singh

I was using ubuntu 10.10 from last year. every thing was Ok with that. recently I've installed Ubuntu 12.04 in place of 10.10, after installing that on my Dell laptop, I started to feel uncomfortable. It to slow event if you move mouse then its feel like i'll take 1min to move one place 2 another.. I know why this is happening, all because of 12.04 runs my CPU up to 99%-100% all over time. And there are 2-3 processes who use all the cpu.. like 1. System_Monitor 2. compiz I don't know why its use all the CPU even Other app can't able to run .. in Ubuntu 10.10 every think was Ok.. Any solution for this problem..!! | Thank's

Read the article
Unable to enable wireless on a Vostro 2520

- by Joe

I have a Vostro 2520 and not sure how to enable wireless on my machine. The details are given below, would appreciate any pointers to resolving this issue. lsmod returns Module Size Used by ath9k 132390 0 ath9k_common 14053 1 ath9k ath9k_hw 411151 2 ath9k,ath9k_common ath 24067 3 ath9k,ath9k_common,ath9k_hw b43 365785 0 mac80211 506816 2 ath9k,b43 cfg80211 205544 4 ath9k,ath,b43,mac80211 bcma 26696 1 b43 ssb 52752 1 b43 ndiswrapper 282628 0 ums_realtek 18248 0 usb_storage 49198 1 ums_realtek uas 18180 0 snd_hda_codec_hdmi 32474 1 snd_hda_codec_cirrus 24002 1 joydev 17693 0 parport_pc 32866 0 ppdev 17113 0 rfcomm 47604 0 bnep 18281 2 bluetooth 180104 10 rfcomm,bnep psmouse 97362 0 dell_wmi 12681 0 sparse_keymap 13890 1 dell_wmi snd_hda_intel 33773 3 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_cirrus,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq wmi 19256 1 dell_wmi snd 78855 16 snd_hda_codec_hdmi,snd_hda_codec_cirrus,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device mac_hid 13253 0 i915 473240 3 drm_kms_helper 46978 1 i915 uvcvideo 72627 0 drm 242038 4 i915,drm_kms_helper videodev 98259 1 uvcvideo soundcore 15091 1 snd dell_laptop 18119 0 dcdbas 14490 1 dell_laptop i2c_algo_bit 13423 1 i915 v4l2_compat_ioctl32 17128 1 videodev snd_page_alloc 18529 2 snd_hda_intel,snd_pcm video 19596 1 i915 serio_raw 13211 0 mei 41616 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp r8169 62099 0 sudo lshw -class network *-network UNCLAIMED description: Network controller product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:07:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f7c00000-f7c07fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:09:00.0 logical name: eth0 version: 07 serial: 78:45:c4:a3:aa:65 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168e-3_0.0.4 03/27/12 ip=192.168.1.5 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:41 ioport:e000(size=256) memory:f0004000-f0004fff memory:f0000000-f0003fff rfkill list all 0: dell-wifi: Wireless LAN Soft blocked: yes Hard blocked: yes 1: dell-bluetooth: Bluetooth Soft blocked: yes Hard blocked: yes Output of lspci > 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev > 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge > Graphics Controller (rev 09) 00:16.0 Communication controller: Intel > Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB > controller: Intel Corporation Panther Point USB Enhanced Host > Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther > Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: > Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) > 00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root > Port 4 (rev c4) 00:1c.5 PCI bridge: Intel Corporation Panther Point > PCI Express Root Port 6 (rev c4) 00:1d.0 USB controller: Intel > Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) > 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller > (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 > port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel > Corporation Panther Point SMBus Controller (rev 04) 07:00.0 Network > controller: Broadcom Corporation Device 4365 (rev 01) 09:00.0 Ethernet > controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express > Gigabit Ethernet controller (rev 07) Output of lspci -v 0:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) Subsystem: Dell Device 0558 Flags: bus master, fast devsel, latency 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) (prog-if 00 [VGA controller]) Subsystem: Dell Device 0558 Flags: bus master, fast devsel, latency 0, IRQ 43 Memory at f7800000 (64-bit, non-prefetchable) [size=4M] Memory at e0000000 (64-bit, prefetchable) [size=256M] I/O ports at f000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) Subsystem: Dell Device 0558 Flags: bus master, fast devsel, latency 0, IRQ 42 Memory at f7d0a000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI]) Subsystem: Dell Device 0558 Flags: bus master, medium devsel, latency 0, IRQ 16 Memory at f7d08000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) Subsystem: Dell Device 0558 Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at f7d00000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 4 (rev c4) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 Memory behind bridge: f7c00000-f7cfffff Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.5 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 6 (rev c4) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=09, subordinate=09, sec-latency=0 I/O behind bridge: 0000e000-0000efff Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) (prog-if 20 [EHCI]) Subsystem: Dell Device 0558 Flags: bus master, medium devsel, latency 0, IRQ 23 Memory at f7d07000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) Subsystem: Dell Device 0558 Flags: bus master, medium devsel, latency 0 Capabilities: <access denied> Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0]) Subsystem: Dell Device 0558 Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 40 I/O ports at f0b0 [size=8] I/O ports at f0a0 [size=4] I/O ports at f090 [size=8] I/O ports at f080 [size=4] I/O ports at f060 [size=32] Memory at f7d06000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) Subsystem: Dell Device 0558 Flags: medium devsel, IRQ 11 Memory at f7d05000 (64-bit, non-prefetchable) [size=256] I/O ports at f040 [size=32] Kernel modules: i2c-i801 07:00.0 Network controller: Broadcom Corporation Device 4365 (rev 01) Subsystem: Dell Device 0016 Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at f7c00000 (64-bit, non-prefetchable) [size=32K] Capabilities: <access denied> 09:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07) Subsystem: Dell Device 0558 Flags: bus master, fast devsel, latency 0, IRQ 41 I/O ports at e000 [size=256] Memory at f0004000 (64-bit, prefetchable) [size=4K] Memory at f0000000 (64-bit, prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169

Read the article
Raid 5 mdadm Problem - Help Please

- by user66260

My Raid 5 array (4 1tb Disks WD10EARS) had was showing as degraded. I looked and one of the disks wasnt installed, so i re-added it with the mdadm add command. the array is now showing as (null)Array , but cant be mounted if i run: root@warren-P5K-E:/home/warren# sudo mdadm --misc --detail /dev/md0 I get: mdadm: cannot open /dev/md0: No such file or directory and running: root@warren-P5K-E:/home/warren# cat /proc/mdstat gives me: Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] unused devices: < none > The data is very important root@warren-P5K-E:/home/warren# mdadm --examine /dev/sda /dev/sda: Magic : a92b4efc Version : 0.90.00 UUID : 00000000:00000000:00000000:00000000 Creation Time : Sat May 26 12:08:14 2012 Raid Level : -unknown- Raid Devices : 0 Total Devices : 4 Preferred Minor : 0 Update Time : Sat May 26 12:08:40 2012 State : active Active Devices : 0 Working Devices : 4 Failed Devices : 0 Spare Devices : 4 Checksum : 82d5b792 - correct Events : 1 Number Major Minor RaidDevice State this 1 8 0 1 spare /dev/sda 0 0 8 16 0 spare /dev/sdb 1 1 8 0 1 spare /dev/sda 2 2 8 32 2 spare /dev/sdc 3 3 8 48 3 spare /dev/sdd root@warren-P5K-E:/home/warren# mdadm --examine /dev/sdb /dev/sdb: Magic : a92b4efc Version : 0.90.00 UUID : 00000000:00000000:00000000:00000000 Creation Time : Sat May 26 12:08:14 2012 Raid Level : -unknown- Raid Devices : 0 Total Devices : 4 Preferred Minor : 0 Update Time : Sat May 26 12:08:40 2012 State : active Active Devices : 0 Working Devices : 4 Failed Devices : 0 Spare Devices : 4 Checksum : 82d5b7a0 - correct Events : 1 Number Major Minor RaidDevice State this 0 8 16 0 spare /dev/sdb 0 0 8 16 0 spare /dev/sdb 1 1 8 0 1 spare /dev/sda 2 2 8 32 2 spare /dev/sdc 3 3 8 48 3 spare /dev/sdd root@warren-P5K-E:/home/warren# oot@warren-P5K-E:/home/warren# mdadm --examine /dev/sdc /dev/sdc: Magic : a92b4efc Version : 0.90.00 UUID : 00000000:00000000:00000000:00000000 Creation Time : Sat May 26 12:08:14 2012 Raid Level : -unknown- Raid Devices : 0 Total Devices : 4 Preferred Minor : 0 Update Time : Sat May 26 12:08:40 2012 State : active Active Devices : 0 Working Devices : 4 Failed Devices : 0 Spare Devices : 4 Checksum : 82d5b7b4 - correct Events : 1 Number Major Minor RaidDevice State this 2 8 32 2 spare /dev/sdc 0 0 8 16 0 spare /dev/sdb 1 1 8 0 1 spare /dev/sda 2 2 8 32 2 spare /dev/sdc 3 3 8 48 3 spare /dev/sdd root@warren-P5K-E:/home/warren# mdadm --examine /dev/sdd /dev/sdd: Magic : a92b4efc Version : 0.90.00 UUID : 00000000:00000000:00000000:00000000 Creation Time : Sat May 26 12:08:14 2012 Raid Level : -unknown- Raid Devices : 0 Total Devices : 4 Preferred Minor : 0 Update Time : Sat May 26 12:08:40 2012 State : active Active Devices : 0 Working Devices : 4 Failed Devices : 0 Spare Devices : 4 Checksum : 82d5b7c6 - correct Events : 1 Number Major Minor RaidDevice State this 3 8 48 3 spare /dev/sdd 0 0 8 16 0 spare /dev/sdb 1 1 8 0 1 spare /dev/sda 2 2 8 32 2 spare /dev/sdc 3 3 8 48 3 spare /dev/sdd That on the 4 drives.

Read the article
Canon Pixma 432 network scanner

- by Donald Cutler

I have a problem with a Canon Pixma MX432 Printer/Scanner. I just removed Windows 7 and installed Ubuntu 14.04 8/17/2014 on an older desktop that I built (The computer is an AMD build with an ASUS motherboard). The printer/scanner is an all-in-one unit that is networked in my house via WiFi. All of the computers in my house can access this printer/scanner. My Macbook, my wife's Windows 8 laptop, and my kids mini iPads. I am giving Linux a test-drive with some success as far as setting devices up. But, for the life of me I cannot figure out my scanner issue. If anyone can help I would appreciate it. Make/Model: Canon Pixma MX432 PPD Driver: I have no idea how to get this info. Supported?: no, from the information I gather from old forum posts. Works?: the printer works via WiFi perfectly, but not the scanner. The Simple Scan program sees the scanner, but produces an error when I attempt to scan. I also tried XSANE, but that program does not even detect the scanner. NOTE: THE PRINTER IS WORKING OFF OF AN UBUNTU DRIVER AND NOT A CANON DRIVER. Linux Version: Ubuntu 14.04 I tried the steps in this post, downloaded the "scangearmp-mx430series-1.90-1-deb.tar.gz" file, but could not get the scanner to work. http://ubuntuforums.org/archive/index.php/t-2096430.html any suggestions?

Read the article
How to Roll Back to Original Plymouth Splash

- by fleamour

The title says it all. It's a bit of an eyesore with propriety NVIDIA drivers, so I tried here. I'm pretty sure I reversed all settings, when it did not work for me. But now: sudo update-alternatives --config default.plymouth Returns error: update-alternatives: error: cannot stat file '/lib/plymouth/themes/default.plymouth': Too many levels of symbolic links I just wanna revert back to the vanilla 12.04 LTS Plymouth splash. Thanks. Also: sudo gedit /lib/plymouth/themes/default.plymouth Returns: "The number of followed links is limited and the actual file could not be found within this limit."

Read the article
My software center asks me to repair but says it cant repair due to an error

- by Stevo

This is the error installArchives() failed: dpkg: dependency problems prevent configuration of libmtp-dev: libmtp-dev depends on libmtp8 (= 1.0.2-1ubuntu1); however: Package libmtp8 is not installed. dpkg: error processing libmtp-dev (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already Errors were encountered while processing: libmtp-dev Error in function: dpkg: dependency problems prevent configuration of libmtp-dev: libmtp-dev depends on libmtp8 (= 1.0.2-1ubuntu1); however: Package libmtp8 is not installed. dpkg: error processing libmtp-dev (--configure): dependency problems - leaving unconfigured

Read the article
How do I create a .deb file?

- by JamesTheAwesomeDude

Yes, I know that this question has been asked many times before, but none of the answers really helped. I'd like to package the Minecraft launcher (which has no proprietary code, AFAIK,) into a .deb file so that I can put it on a flash drive and share it with my friends. I have managed to install Minecraft it manually (put some files into /opt/minecraft, download an icon, and create a .desktop file in /usr/share/applications,) and I have made a shell script that completely automates the process, but it relies on wget to retrieve a few files, including the .desktop file. (It isn't a self-extracting archive, after all.) I'd like to be able to do this offline, as a lot of my friends have slow or no internet. (One of their internet lines was buried so shallowly that it actually got knocked out by the lawnmower.) I won't be loading it into a PPA or anything like that; I just want it to be a "formal" package that can be easily installed and uninstalled. (One thing that I would like is for sudo apt-get purge minecraft to also remove the .minecraft folder. It would also be nice to define the dependedcies as being able to accept OpenJDK or Sun's JVM.) Oh, just so you know, the Minecraft launcher is a .jar file, but I can very, very easily launch it via shell scripts. The exact command is right on the download page.

Read the article
gnome-tweak-tool doesn't start due to "ImportError: No module named gi" error

- by Khajak Vahanyan

I am using Ubuntu 11.10 with Gnome Shell and have a problem with gnome-tweak-tool. When I click on it, it does nothing and when I try to open with terminal it gives this error: Traceback (most recent call last): File "/usr/bin/gnome-tweak-tool", line 22, in <module> import gi ImportError: No module named gi I googled a bit, found some solutions (reinstalled some python-gobject packages), but still didn't help./

Read the article
How do I get sound output on HDMI without the need to start X?

- by Magnus Hoff

I have a headless machine connected to my sound system, and I am using it to run a music playing daemon that I control over the network. (Among other things) However, I can't seem to be able to have sound come out of my speakers without running X. I am running pulse audio in a system wide instance and my daemon is not running within X. Nevertheless, when my daemon is playing music without me hearing it, I can fix it by running startx in an unrelated session. After X starts, I can hear the sound. The sound disappears again if I kill the X server. Interestingly/annoyingly, the sound also stops after X has been running for a few minutes. This could possibly be because of a screen saver of some sort, but I haven't been able to verify or falsify this theory. So my current workaround is to ssh into the box whenever I want music and startx, and restart it every fifteen minutes or so. I'd like to do better. I have been able to verify the following: Adjustments in alsamixer have no effect on this problem. The relevant output channel is never muted In alsamixer, I can see no difference between when the sound is working and when it isn't Nothing is muted in pactl list There is no difference in the output from pactl list between before starting X and after it's started. (Except the identifier of the pactl instance connected to pulse, which is different each time you run pactl) The user running the music daemon is a member of the groups audio, pulse and pulse-access The music daemon program does not report any error messages and acts as if it is playing the music like it should Some form of dbus daemon is running. ps aux|grep dbus reports dbus-daemon --system --fork --activation=upstart before and after I have started X Some details about my hardware: Motherboard: http://www.asus.com/Motherboards/AT5IONTI_DELUXE/ Sound chip: Nvidia GPU 0b HDMI/DP (from alsamixer) Using HDMI for output (Machine also has an Intel Realtek ALC887 that I am not using) Output of lsmod: Module Size Used by deflate 12617 0 zlib_deflate 27139 1 deflate ctr 13201 0 twofish_generic 16635 0 twofish_x86_64_3way 25287 0 twofish_x86_64 12907 1 twofish_x86_64_3way twofish_common 20919 3 twofish_generic,twofish_x86_64_3way,twofish_x86_64 camellia 29348 0 serpent 29125 0 blowfish_generic 12530 0 blowfish_x86_64 21466 0 blowfish_common 16739 2 blowfish_generic,blowfish_x86_64 cast5 25112 0 des_generic 21415 0 xcbc 12815 0 rmd160 16744 0 bnep 18281 2 rfcomm 47604 12 sha512_generic 12796 0 crypto_null 12918 0 parport_pc 32866 0 af_key 36389 0 ppdev 17113 0 binfmt_misc 17540 1 nfsd 281980 2 ext2 73795 1 nfs 436929 1 lockd 90326 2 nfsd,nfs fscache 61529 1 nfs auth_rpcgss 53380 2 nfsd,nfs nfs_acl 12883 2 nfsd,nfs sunrpc 255224 16 nfsd,nfs,lockd,auth_rpcgss,nfs_acl btusb 18332 2 vesafb 13844 2 pl2303 17957 1 ath3k 12961 0 bluetooth 180153 24 bnep,rfcomm,btusb,ath3k snd_hda_codec_hdmi 32474 4 nvidia 11308613 0 ftdi_sio 40679 1 usbserial 47113 6 pl2303,ftdi_sio psmouse 97485 0 snd_hda_codec_realtek 224173 1 snd_hda_intel 33719 5 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel serio_raw 13211 0 snd_seq_midi 13324 0 snd_hwdep 17764 1 snd_hda_codec snd_pcm 97275 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61929 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 79041 20 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device asus_atk0110 18078 0 mac_hid 13253 0 jc42 13948 0 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm coretemp 13554 0 i2c_i801 17570 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp r8169 62154 0 Any ideas? What does X do that's so important?

Read the article
Lightning is not compatible with Thunderbird 7.0.1

- by Fredrik

I reinstalled Ubuntu 11.10 the other day and now when I try to install the Lightning extension in Thunderbird it states: Lightning is not compatible with Thunderbird 7.0.1. As extra information lightning is not comming up automaticly when searching for it within Thunderbird. You need to download it manually. And also I had it installed before I reformated the computer. Anybody has a solution to this issue?

Read the article
Audio on beagleboard xM

- by Francesco

I am running Ubuntu 12.04 Precise for omap on a beagleboard xM. I am trying to setup audio. No soundcards are listed in /proc/asound/cards. Alsamixer fails with cannot open mixer: No such file or directory Under /dev/snd/ I have only: seq timer Driver's name should be omap3beagle - twl4030. I am using alsa 1.0.24 that is installed by default with Ubuntu 12.04. I've googled a lot but I have not found anything yet. Thanks

Read the article

< Previous Page | 207 208 209 210 211 212 213 214 215 216 217 218 | Next Page >