Search Results

Search found 6178 results on 248 pages for 'section'.

Page 211/248 | < Previous Page | 207 208 209 210 211 212 213 214 215 216 217 218  | Next Page >

• Install XP Mode with VirtualBox Using the VMLite Plugin

  - by Mysticgeek

  Would you like to run XP Mode, but prefer Sun’s VirtualBox for virtualization?  Thanks to the free VMLite plugin, you can quickly and easily run XP Mode in or alongside VirtualBox. Yesterday we showed you one method to install XP Mode in VirtualBox, unfortunately in that situation you lose XP’s activation, and it isn’t possible to reactivate it. Today we show you a tried and true method for running XP mode in VirtualBox and integrating it seamlessly with Windows 7. Note: You need to have Windows 7 Professional or above to use XP Mode in this manner. Install XP Mode Make sure you’re logged in with Administrator rights for the entire process. The first thing you’ll want to do is install XP Mode on your system (link below). You don’t need to install Windows Virtual PC. Go through and install XP Mode using the defaults. Install VirtualBox Next you’ll need to install VirtualBox 3.1.2 or higher if it isn’t installed already. If you have an older version of VirtualBox installed, make sure to update it. During setup you’re notified that your network connection will be reset. Check the box next to Always trust software from “Sun Microsystems, Inc.” then click Install.   Setup only takes a couple of minutes, and does not require a reboot…which is always nice. Install VMLite XP Mode Plugin The next thing we’ll need to install is the VMLite XP Mode Plugin. Again Installation is simple following the install wizard. During the install like with VirtualBox you’ll be asked to install the device software. After it’s installed go to the Start menu and run VMLite Wizard as Administrator. Select the location of the XP Mode Package which by default should be in C:\Program Files\Windows XP Mode. Accept the EULA…and notice that it’s meant for Windows 7 Professional, Enterprise, and Ultimate editions. Next, name the machine, choose the install folder, and type in a password. Select if you want Automatic Updates turned on or not. Wait while the process completes then click Finish.   The VMLite XP Mode will set up to run the first time. That is all there is to this section. You can run XP Mode from within the VMLite Workstation right away. XP Mode is fully activated already, and the Guest Additions are already installed, so there’s nothing else you need to do!  XP Mode is the whole way ready to use. Integration with VirtualBox Since we installed the VMLite Plugin, when you open VirtualBox you’ll see it listed as one of your machines and you can start it up from here.   Here we see VMLite XP Mode running in Sun VirtualBox. Integrate with Windows 7 To integrate it with Windows 7 click on Machine \ Seamless Mode…   Here you can see the XP menu and Taskbar will be placed on top of Windows 7. From here you can access what you need from XP Mode.   Here we see XP running on Virtual Box in Seamless Mode. We have the old XP WordPad sitting next to the new Windows 7 version of WordPad. This works so seamlessly you forget if your working in XP or Windows 7. In this example we have Windows Home Server Console running in Windows 7, while installing MSE from IE 6 in XP Mode. At the top of the screen you will still have access to the VMs controls.   You can click the button to exit Seamless Mode, or simply hit the right “CTRL+L” Conclusion This is a very slick way to run XP Mode in VirtualBox on any machine that doesn’t have Hardware Virtualization. This method also doesn’t lose the XP Mode activation and is actually extremely easy to set up. If you prefer VMware (like we do), Check out how to run XP Mode on machines without Hardware Virtualization capability, and also how to create an XP Mode for Vista and Windows 7 Home Premium. Links Download XP Mode Download VirtualBox Download VMLite XP Mode Plugin for VirtualBox (Site Registration Required) Similar Articles Productive Geek Tips Search for Install Packages from the Ubuntu Command LineHow To Run XP Mode in VirtualBox on Windows 7 (sort of)Install and Use the VLC Media Player on Ubuntu LinuxInstall Monodevelop on Ubuntu LinuxInstall Flash Plugin Manually in Firefox on Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

  Read the article

• AGENT: The World's Smartest Watch

  - by Rob Chartier

  AGENT: The World's Smartest Watch by Secret Labs + House of Horology Disclaimer: Most if not all of this content has been gleaned from the comments on the Kickstarter project page and comments section. Any discrepancies between this post and any documentation on agentwatches.com, kickstarter.com, etc.., those official sites take precedence. Overview The next generation smartwatch with brand-new technology. World-class developer tools, unparalleled battery life, Qi wireless charging. Kickstarter Page, Comments Funding period : May 21, 2013 - Jun 20, 2013 MSRP : $249 Other Urls http://www.agentwatches.com/ https://www.facebook.com/agentwatches http://twitter.com/agentwatches http://pinterest.com/agentwatches/ http://paper.li/robchartier/1371234640 Developer Story The first official launch of the preview SDK and emulator will happen on 20-Jun-2013.  All development will be done in Visual Studio 2012, using the .NET Micro Framework SDK 2.3.  The SDK will ship with the first round of the expected API for developers along with an emulator. With that said, there is no need to wait for the SDK.  You can download the tooling now and get started with Apps and Faces immediately.  The only thing that you will not be able to work with is the API; but for example, watch faces, you can start building the basic face rendering with the Bitmap graphics drawing in the .NET Micro Framework.   Does it look good? Before we dig into any more of the gory details, here are a few photos of the current available prototype models.   The watch on the tiny QI Charter   If you wander too far away from your phone, your watch will let you know with a vibration and a message, all but one button will dismiss the message.   An app showing the premium weather data!   Nice stitching on the straps, leather and silicon will be available, along with a few lengths to choose from (short, regular, long lengths). On to those gory details…. Hardware Specs Processor 120MHz ARM Cortex-M4 processor (ATSAM4SD32) with secondary AVR co-processor Flash & RAM 2MB of onboard flash and 160KB of RAM 1/4 of the onboard flash will be used by the OS The flash is permanent (non-volatile) storage. Bluetooth Bluetooth 4.0 BD/EDR + LE Bluetooth 4.0 is backwards compatible with Bluetooth 2.1, so classic Bluetooth functions (BD/EDR, SPP/AVRCP/PBAP/etc.) will work fine. Sensors 3D Accelerometer (Motion) ST LSM303DLHC Ambient Light Sensor Hardware power metering Vibration Motor (You can pulse it to create vibration patterns, not sure about the vibration strength - driven with PWM) No piezo/speaker or microphone. Other QI Wireless Charging, no NFC, no wall adapter included Custom LED Backlight No GPS in the watch. It uses the GPS in your phone. AGENT watch apps are deployed and debugged wirelessly from your PC via Bluetooth. RoHS, Pb-free Battery Expected to use a CR2430-sized rechargeable battery – replaceable (Mouser, Amazon) Estimated charging time from empty is 2 hours with provided charger 7 Days typical with Bluetooth on, 30 days with Bluetooth off (watch-face only mode) The battery should last at least 2 years, with 100s of charge cycles. Physical dimensions Roughly 38mm top-to-bottom on the front face 35mm left-to-right on the front face and around 12mm in depth 22mm strap Two ~1/16" hex screws to attach the watch pin The top watchcase material candidates are PVD stainless steel, brushed matte ceramic, and high-quality polycarbonate (TBD). The glass lens is mineral glass, Anti-glare glass lens Strap options Leather and silicon straps will be available Expected to have three sizes Display 1.28" Sharp Memory Display The display stays on 100% of the time. Dimensions: 128x128 pixels Buttons Custom "Pusher" buttons, they will not make noise like a mouse click, and are very durable. The top-left button activates the backlight; bottom-left changes apps; three buttons on the right are up/select/down and can be used for custom purposes by apps. Backup reset procedure is currently activated by holding the home/menu button and the top-right user button for about ten seconds Device Support Android 2.3 or newer iPhone 4S or newer Windows Phone 8 or newer Heart Rate monitors - Bluetooth SPP or Bluetooth LE (GATT) is what you'll want the heart monitor to support. Almost limitless Bluetooth device support! Internationalization & Localization Full UTF8 Support from the ground up. AGENT's user interface is in English. Your content (caller ID, music tracks, notifications) will be in your native language. We have a plan to cover most major character sets, with Latin characters pre-loaded on the watch. Simplified Chinese will be available Feature overview Phone lost alert Caller ID Music Control (possible volume control) Wireless Charging Timer Stopwatch Vibrating Alarm (possibly custom vibrations for caller id) A few default watch faces Airplane mode (by demand or low power) Can be turned off completely Customizable 3rd party watch faces, applications which can be loaded over bluetooth. Sample apps that maybe installed Weather Sample Apps not installed Exercise App Other Possible Skype integration over Bluetooth. They will provide an AGENT app for your smartphone (iPhone, Android, Windows Phone). You'll be able to use it to load apps onto the watch.. You will be able to cancel phone calls. With compatible phones you can also answer, end, etc. They are adopting the standard hands-free profile to provide these features and caller ID.

  Read the article

• Where is my app.config for SSIS?

  Sometimes when working with SSIS you need to add or change settings in the .NET application configuration file, which can be a bit confusing when you are building a SSIS package not an application. First of all lets review a couple of examples where you may need to do this. You are using referencing an assembly in a Script Task that uses Enterprise Library (aka EntLib), so you need to add the relevant configuration sections and settings, perhaps for the logging application block. You are using using Enterprise Library in a custom task or component, and again you need to add the relevant configuration sections and settings. You are using a web service with Microsoft Web Services Enhancements (WSE) 3.0 and hosting the proxy in SSIS, in an assembly used by your package, and need to add the configuration sections and settings. You need to change behaviours of the .NET framework which can be influenced by a configuration file, such as the System.Net.Mail default SMTP settings. Perhaps you wish to configure System.Net and the httpWebRequest header for parsing unsafe header (useUnsafeHeaderParsing), which will change the way the HTTP Connection manager behaves. You are consuming a WCF service and wish to specify the endpoint in configuration. There are no doubt plenty more examples but each of these requires us to identify the correct configuration file and and make the relevant changes. There are actually several configuration files, each used by a different execution host depending on how you are working with the SSIS package. The folders we need to look in will actually vary depending on the version of SQL Server as well as the processor architecture, but most are all what we can call the Binn folder. The SQL Server 2005 Binn folder is at C:\Program Files\Microsoft SQL Server\90\DTS\Binn\, compared to C:\Program Files\Microsoft SQL Server\100\DTS\Binn\ for SQL Server 2008. If you are on a 64-bit machine then you will see C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn\ for the 32-bit executables and C:\Program Files\Microsoft SQL Server\90\DTS\Binn\ for 64-bit, so be sure to check all relevant locations. Of course SQL Server 2008 may have a C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\ on a 64-bit machine too. To recap, the version of SQL Server determines if you look in the 90 or 100 sub-folder under SQL Server in Program Files (C:\Program Files\Microsoft SQL Server\nn\) . If you are running a 64-bit operating system then you will have two instances program files, C:\Program Files (x86)\ for 32-bit and  C:\Program Files\ for 64-bit. You may wish to check both depending on what you are doing, but this is covered more under each section below. There are a total of five specific configuration files that you may need to change, each one is detailed below: DTExec.exe.config DTExec.exe is the standalone command line tool used for executing SSIS packages, and therefore it is an execution host with an app.config file. e.g. C:\Program Files\Microsoft SQL Server\90\DTS\Binn\DTExec.exe.config The file can be found in both the 32-bit and 64-bit Binn folders. DtsDebugHost.exe.config DtsDebugHost.exe is the execution host used by Business Intelligence Development Studio (BIDS) / Visual Studio when executing a package from the designer in debug mode, which is the default behaviour. e.g. C:\Program Files\Microsoft SQL Server\90\DTS\Binn\DtsDebugHost.exe.config The file can be found in both the 32-bit and 64-bit Binn folders. This may surprise some people as Visual Studio is only 32-bit, but thankfully the debugger supports both. This can be set in the project properties, see the Run64BitRuntime property (true or false) in the Debugging pane of the Project Properties. dtshost.exe.config dtshost.exe is the execution host used by what I think of as the built-in features of SQL Server such as SQL Server Agent e.g. C:\Program Files\Microsoft SQL Server\90\DTS\Binn\dtshost.exe.config This file can be found in both the 32-bit and 64-bit Binn folders devenv.exe.config Something slightly different is devenv.exe which is Visual Studio. This configuration file may also need changing if you need a feature at design-time such as in a Task Editor or Connection Manager editor. Visual Studio 2005 for SQL Server 2005  - C:\Program Files\Microsoft Visual Studio 8\Common7\IDE\devenv.exe.config Visual Studio 2008 for SQL Server 2008  - C:\Program Files\Microsoft Visual Studio 9.0\Common7\IDE\devenv.exe.config Visual Studio is only available for 32-bit so on a 64-bit machine you will have to look in C:\Program Files (x86)\ only. DTExecUI.exe.config The DTExec UI tool can also have a configuration file and these cab be found under the Tools folders for SQL Sever as shown below. C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\DTExecUI.exe C:\Program Files\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\DTExecUI.exe A configuration file may not exist, but if you can find the matching executable you know you are in the right place so can go ahead and add a new file yourself. In summary we have covered the assembly configuration files for all of the standard methods of building and running a SSIS package, but obviously if you are working programmatically you will need to make the relevant modifications to your program’s app.config as well.

  Read the article

• SQL SERVER – Enumerations in Relational Database – Best Practice

  - by pinaldave

  Marko Parkkola This article has been submitted by Marko Parkkola, Data systems designer at Saarionen Oy, Finland. Marko is excellent developer and always thinking at next level. You can read his earlier comment which created very interesting discussion here: SQL SERVER- IF EXISTS(Select null from table) vs IF EXISTS(Select 1 from table). I must express my special thanks to Marko for sending this best practice for Enumerations in Relational Database. He has really wrote excellent piece here and welcome comments here. Enumerations in Relational Database This is a subject which is very basic thing in relational databases but often not very well understood and sometimes badly implemented. There are of course many ways to do this but I concentrate only two cases, one which is “the right way” and one which is definitely wrong way. The concept Let’s say we have table Person in our database. Person has properties/fields like Firstname, Lastname, Birthday and so on. Then there’s a field that tells person’s marital status and let’s name it the same way; MaritalStatus. Now MaritalStatus is an enumeration. In C# I would definitely make it an enumeration with values likes Single, InRelationship, Married, Divorced. Now here comes the problem, SQL doesn’t have enumerations. The wrong way This is, in my opinion, absolutely the wrong way to do this. It has one upside though; you’ll see the enumeration’s description instantly when you do simple SELECT query and you don’t have to deal with mysterious values. There’s plenty of downsides too and one would be database fragmentation. Consider this (I’ve left all indexes and constraints out of the query on purpose). CREATE TABLE [dbo].[Person] ( [Firstname] NVARCHAR(100), [Lastname] NVARCHAR(100), [Birthday] datetime, [MaritalStatus] NVARCHAR(10) ) You have nvarchar(20) field in the table that tells the marital status. Obvious problem with this is that what if you create a new value which doesn’t fit into 20 characters? You’ll have to come and alter the table. There are other problems also but I’ll leave those for the reader to think about. The correct way Here’s how I’ve done this in many projects. This model still has one problem but it can be alleviated in the application layer or with CHECK constraints if you like. First I will create a namespace table which tells the name of the enumeration. I will add one row to it too. I’ll write all the indexes and constraints here too. CREATE TABLE [CodeNamespace] ( [Id] INT IDENTITY(1, 1), [Name] NVARCHAR(100) NOT NULL, CONSTRAINT [PK_CodeNamespace] PRIMARY KEY ([Id]), CONSTRAINT [IXQ_CodeNamespace_Name] UNIQUE NONCLUSTERED ([Name]) ) GO INSERT INTO [CodeNamespace] SELECT 'MaritalStatus' GO Then I create a table that holds the actual values and which reference to namespace table in order to group the values under different namespaces. I’ll add couple of rows here too. CREATE TABLE [CodeValue] ( [CodeNamespaceId] INT NOT NULL, [Value] INT NOT NULL, [Description] NVARCHAR(100) NOT NULL, [OrderBy] INT, CONSTRAINT [PK_CodeValue] PRIMARY KEY CLUSTERED ([CodeNamespaceId], [Value]), CONSTRAINT [FK_CodeValue_CodeNamespace] FOREIGN KEY ([CodeNamespaceId]) REFERENCES [CodeNamespace] ([Id]) ) GO -- 1 is the 'MaritalStatus' namespace INSERT INTO [CodeValue] SELECT 1, 1, 'Single', 1 INSERT INTO [CodeValue] SELECT 1, 2, 'In relationship', 2 INSERT INTO [CodeValue] SELECT 1, 3, 'Married', 3 INSERT INTO [CodeValue] SELECT 1, 4, 'Divorced', 4 GO Now there’s four columns in CodeValue table. CodeNamespaceId tells under which namespace values belongs to. Value tells the enumeration value which is used in Person table (I’ll show how this is done below). Description tells what the value means. You can use this, for example, column in UI’s combo box. OrderBy tells if the values needs to be ordered in some way when displayed in the UI. And here’s the Person table again now with correct columns. I’ll add one row here to show how enumerations are to be used. CREATE TABLE [dbo].[Person] ( [Firstname] NVARCHAR(100), [Lastname] NVARCHAR(100), [Birthday] datetime, [MaritalStatus] INT ) GO INSERT INTO [Person] SELECT 'Marko', 'Parkkola', '1977-03-04', 3 GO Now I said earlier that there is one problem with this. MaritalStatus column doesn’t have any database enforced relationship to the CodeValue table so you can enter any value you like into this field. I’ve solved this problem in the application layer by selecting all the values from the CodeValue table and put them into a combobox / dropdownlist (with Value field as value and Description as text) so the end user can’t enter any illegal values; and of course I’ll check the entered value in data access layer also. I said in the “The wrong way” section that there is one benefit to it. In fact, you can have the same benefit here by using a simple view, which I schema bound so you can even index it if you like. CREATE VIEW [dbo].[Person_v] WITH SCHEMABINDING AS SELECT p.[Firstname], p.[Lastname], p.[BirthDay], c.[Description] MaritalStatus FROM [dbo].[Person] p JOIN [dbo].[CodeValue] c ON p.[MaritalStatus] = c.[Value] JOIN [dbo].[CodeNamespace] n ON n.[Id] = c.[CodeNamespaceId] AND n.[Name] = 'MaritalStatus' GO -- Select from View SELECT * FROM [dbo].[Person_v] GO This is excellent write up byMarko Parkkola. Do you have this kind of design setup at your organization? Let us know your opinion. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Best Practices, Database, DBA, Readers Contribution, Software Development, SQL, SQL Authority, SQL Documentation, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Where is my app.config for SSIS?

  Sometimes when working with SSIS you need to add or change settings in the .NET application configuration file, which can be a bit confusing when you are building a SSIS package not an application. First of all lets review a couple of examples where you may need to do this. You are using referencing an assembly in a Script Task that uses Enterprise Library (aka EntLib), so you need to add the relevant configuration sections and settings, perhaps for the logging application block. You are using using Enterprise Library in a custom task or component, and again you need to add the relevant configuration sections and settings. You are using a web service with Microsoft Web Services Enhancements (WSE) 3.0 and hosting the proxy in SSIS, in an assembly used by your package, and need to add the configuration sections and settings. You need to change behaviours of the .NET framework which can be influenced by a configuration file, such as the System.Net.Mail default SMTP settings. Perhaps you wish to configure System.Net and the httpWebRequest header for parsing unsafe header (useUnsafeHeaderParsing), which will change the way the HTTP Connection manager behaves. You are consuming a WCF service and wish to specify the endpoint in configuration. There are no doubt plenty more examples but each of these requires us to identify the correct configuration file and and make the relevant changes. There are actually several configuration files, each used by a different execution host depending on how you are working with the SSIS package. The folders we need to look in will actually vary depending on the version of SQL Server as well as the processor architecture, but most are all what we can call the Binn folder. The SQL Server 2005 Binn folder is at C:\Program Files\Microsoft SQL Server\90\DTS\Binn\, compared to C:\Program Files\Microsoft SQL Server\100\DTS\Binn\ for SQL Server 2008. If you are on a 64-bit machine then you will see C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn\ for the 32-bit executables and C:\Program Files\Microsoft SQL Server\90\DTS\Binn\ for 64-bit, so be sure to check all relevant locations. Of course SQL Server 2008 may have a C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\ on a 64-bit machine too. To recap, the version of SQL Server determines if you look in the 90 or 100 sub-folder under SQL Server in Program Files (C:\Program Files\Microsoft SQL Server\nn\) . If you are running a 64-bit operating system then you will have two instances program files, C:\Program Files (x86)\ for 32-bit and  C:\Program Files\ for 64-bit. You may wish to check both depending on what you are doing, but this is covered more under each section below. There are a total of five specific configuration files that you may need to change, each one is detailed below: DTExec.exe.config DTExec.exe is the standalone command line tool used for executing SSIS packages, and therefore it is an execution host with an app.config file. e.g. C:\Program Files\Microsoft SQL Server\90\DTS\Binn\DTExec.exe.config The file can be found in both the 32-bit and 64-bit Binn folders. DtsDebugHost.exe.config DtsDebugHost.exe is the execution host used by Business Intelligence Development Studio (BIDS) / Visual Studio when executing a package from the designer in debug mode, which is the default behaviour. e.g. C:\Program Files\Microsoft SQL Server\90\DTS\Binn\DtsDebugHost.exe.config The file can be found in both the 32-bit and 64-bit Binn folders. This may surprise some people as Visual Studio is only 32-bit, but thankfully the debugger supports both. This can be set in the project properties, see the Run64BitRuntime property (true or false) in the Debugging pane of the Project Properties. dtshost.exe.config dtshost.exe is the execution host used by what I think of as the built-in features of SQL Server such as SQL Server Agent e.g. C:\Program Files\Microsoft SQL Server\90\DTS\Binn\dtshost.exe.config This file can be found in both the 32-bit and 64-bit Binn folders devenv.exe.config Something slightly different is devenv.exe which is Visual Studio. This configuration file may also need changing if you need a feature at design-time such as in a Task Editor or Connection Manager editor. Visual Studio 2005 for SQL Server 2005  - C:\Program Files\Microsoft Visual Studio 8\Common7\IDE\devenv.exe.config Visual Studio 2008 for SQL Server 2008  - C:\Program Files\Microsoft Visual Studio 9.0\Common7\IDE\devenv.exe.config Visual Studio is only available for 32-bit so on a 64-bit machine you will have to look in C:\Program Files (x86)\ only. DTExecUI.exe.config The DTExec UI tool can also have a configuration file and these cab be found under the Tools folders for SQL Sever as shown below. C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\DTExecUI.exe C:\Program Files\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\DTExecUI.exe A configuration file may not exist, but if you can find the matching executable you know you are in the right place so can go ahead and add a new file yourself. In summary we have covered the assembly configuration files for all of the standard methods of building and running a SSIS package, but obviously if you are working programmatically you will need to make the relevant modifications to your program’s app.config as well.

  Read the article

• Importing Multiple Schemas to a Model in Oracle SQL Developer Data Modeler

  - by thatjeffsmith

  Your physical data model might stretch across multiple Oracle schemas. Or maybe you just want a single diagram containing tables, views, etc. spanning more than a single user in the database. The process for importing a data dictionary is the same, regardless if you want to suck in objects from one schema, or many schemas. Let’s take a quick look at how to get started with a data dictionary import. I’m using Oracle SQL Developer in this example. The process is nearly identical in Oracle SQL Developer Data Modeler – the only difference being you’ll use the ‘File’ menu to get started versus the ‘File – Data Modeler’ menu in SQL Developer. Remember, the functionality is exactly the same whether you use SQL Developer or SQL Developer Data Modeler when it comes to the data modeling features – you’ll just have a cleaner user interface in SQL Developer Data Modeler. Importing a Data Dictionary to a Model You’ll want to open or create your model first. You can import objects to an existing or new model. The easiest way to get started is to simply open the ‘Browser’ under the View menu. The Browser allows you to navigate your open designs/models You’ll see an ‘Untitled_1′ model by default. I’ve renamed mine to ‘hr_sh_scott_demo.’ Now go back to the File menu, and expand the ‘Data Modeler’ section, and select ‘Import – Data Dictionary.’ This is a fancy way of saying, ‘suck objects out of the database into my model’ Connect! If you haven’t already defined a connection to the database you want to reverse engineer, you’ll need to do that now. I’m going to assume you already have that connection – so select it, and hit the ‘Next’ button. Select the Schema(s) to be imported Select one or more schemas you want to import The schemas selected on this page of the wizard will dictate the lists of tables, views, synonyms, and everything else you can choose from in the next wizard step to import. For brevity, I have selected ALL tables, views, and synonyms from 3 different schemas: HR SCOTT SH Once I hit the ‘Finish’ button in the wizard, SQL Developer will interrogate the database and add the objects to our model. The Big Model and the 3 Little Models I can now see ALL of the objects I just imported in the ‘hr_sh_scott_demo’ relational model in my design tree, and in my relational diagram. Quick Tip: Oracle SQL Developer calls what most folks think of as a ‘Physical Model’ the ‘Relational Model.’ Same difference, mostly. In SQL Developer, a Physical model allows you to define partitioning schemes, advanced storage parameters, and add your PL/SQL code. You can have multiple physical models per relational models. For example I might have a 4 Node RAC in Production that uses partitioning, but in test/dev, only have a single instance with no partitioning. I can have models for both of those physical implementations. The list of tables in my relational model Wouldn’t it be nice if I could segregate the objects based on their schema? Good news, you can! And it’s done by default Several of you might already know where I’m going with this – SUBVIEWS. You can easily create a ‘SubView’ by selecting one or more objects in your model or diagram and add them to a new SubView. SubViews are just mini-models. They contain a subset of objects from the main model. This is very handy when you want to break your model into smaller, more digestible parts. The model information is identical across the model and subviews, so you don’t have to worry about making a change in one place and not having it propagate across your design. SubViews can be used as filters when you create reports and exports as well. So instead of generating a PDF for everything, just show me what’s in my ‘ABC’ subview. But, I don’t want to do any work! Remember, I’m really lazy. More good news – it’s already done by default! The schemas are automatically used to create default SubViews Auto-Navigate to the Object in the Diagram In the subview tree node, right-click on the object you want to navigate to. You can ask to be taken to the main model view or to the SubView location. If you haven’t already opened the SubView in the diagram, it will be automatically opened for you. The SubView diagram only contains the objects from that SubView Your SubView might still be pretty big, many dozens of objects, so don’t forget about the ‘Navigator‘ either! In summary, use the ‘Import’ feature to add existing database objects to your model. If you import from multiple schemas, take advantage of the default schema based SubViews to help you manage your models! Sometimes less is more!

  Read the article

• New MySQL Cluster 7.3 Previews: Foreign Keys, NoSQL Node.js API and Auto-Tuned Clusters

  - by Mat Keep

  At this weeks MySQL Connect conference, Oracle previewed an exciting new wave of developments for MySQL Cluster, further extending its simplicity and flexibility by expanding the range of use-cases, adding new NoSQL options, and automating configuration. What’s new: Development Release 1: MySQL Cluster 7.3 with Foreign Keys Early Access “Labs” Preview: MySQL Cluster NoSQL API for Node.js Early Access “Labs” Preview: MySQL Cluster GUI-Based Auto-Installer In this blog, I'll introduce you to the features being previewed. Review the blogs listed below for more detail on each of the specific features discussed. Save the date!: A live webinar is scheduled for Thursday 25th October at 0900 Pacific Time / 1600UTC where we will discuss each of these enhancements in more detail. Registration will be open soon and published to the MySQL webinars page MySQL Cluster 7.3: Development Release 1 The first MySQL Cluster 7.3 Development Milestone Release (DMR) previews Foreign Keys, bringing powerful new functionality to MySQL Cluster while eliminating development complexity. Foreign Key support has been one of the most requested enhancements to MySQL Cluster – enabling users to simplify their data models and application logic – while extending the range of use-cases for both custom projects requiring referential integrity and packaged applications, such as eCommerce, CRM, CMS, etc. Implementation The Foreign Key functionality is implemented directly within the MySQL Cluster data nodes, allowing any client API accessing the cluster to benefit from them – whether they are SQL or one of the NoSQL interfaces (Memcached, C++, Java, JPA, HTTP/REST or the new Node.js API - discussed later.) The core referential actions defined in the SQL:2003 standard are implemented: CASCADE RESTRICT NO ACTION SET NULL In addition, the MySQL Cluster implementation supports the online adding and dropping of Foreign Keys, ensuring the Cluster continues to serve both read and write requests during the operation.  This represents a further enhancement to MySQL Cluster's support for on0line schema changes, ie adding and dropping indexes, adding columns, etc.  Read this blog for a demonstration of using Foreign Keys with MySQL Cluster.  Getting Started with MySQL Cluster 7.3 DMR1: Users can download either the source or binary and evaluate the MySQL Cluster 7.3 DMR with Foreign Keys now! (Select the Development Release tab). MySQL Cluster NoSQL API for Node.js Node.js is hot! In a little over 3 years, it has become one of the most popular environments for developing next generation web, cloud, mobile and social applications. Bringing JavaScript from the browser to the server, the design goal of Node.js is to build new real-time applications supporting millions of client connections, serviced by a single CPU core. Making it simple to further extend the flexibility and power of Node.js to the database layer, we are previewing the Node.js Javascript API for MySQL Cluster as an Early Access release, available for download now from http://labs.mysql.com/. Select the following build: MySQL-Cluster-NoSQL-Connector-for-Node-js Alternatively, you can clone the project at the MySQL GitHub page.  Implemented as a module for the V8 engine, the new API provides Node.js with a native, asynchronous JavaScript interface that can be used to both query and receive results sets directly from MySQL Cluster, without transformations to SQL. Figure 1: MySQL Cluster NoSQL API for Node.js enables end-to-end JavaScript development Rather than just presenting a simple interface to the database, the Node.js module integrates the MySQL Cluster native API library directly within the web application itself, enabling developers to seamlessly couple their high performance, distributed applications with a high performance, distributed, persistence layer delivering 99.999% availability. The new Node.js API joins a rich array of NoSQL interfaces available for MySQL Cluster. Whichever API is chosen for an application, SQL and NoSQL can be used concurrently across the same data set, providing the ultimate in developer flexibility.  Get started with MySQL Cluster NoSQL API for Node.js tutorial MySQL Cluster GUI-Based Auto-Installer Compatible with both MySQL Cluster 7.2 and 7.3, the Auto-Installer makes it simple for DevOps teams to quickly configure and provision highly optimized MySQL Cluster deployments – whether on-premise or in the cloud. Implemented with a standard HTML GUI and Python-based web server back-end, the Auto-Installer intelligently configures MySQL Cluster based on application requirements and auto-discovered hardware resources Figure 2: Automated Tuning and Configuration of MySQL Cluster Developed by the same engineering team responsible for the MySQL Cluster database, the installer provides standardized configurations that make it simple, quick and easy to build stable and high performance clustered environments. The auto-installer is previewed as an Early Access release, available for download now from http://labs.mysql.com/, by selecting the MySQL-Cluster-Auto-Installer build. You can read more about getting started with the MySQL Cluster auto-installer here. Watch the YouTube video for a demonstration of using the MySQL Cluster auto-installer Getting Started with MySQL Cluster If you are new to MySQL Cluster, the Getting Started guide will walk you through installing an evaluation cluster on a singe host (these guides reflect MySQL Cluster 7.2, but apply equally well to 7.3 and the Early Access previews). Or use the new MySQL Cluster Auto-Installer! Download the Guide to Scaling Web Databases with MySQL Cluster (to learn more about its architecture, design and ideal use-cases). Post any questions to the MySQL Cluster forum where our Engineering team and the MySQL Cluster community will attempt to assist you. Post any bugs you find to the MySQL bug tracking system (select MySQL Cluster from the Category drop-down menu) And if you have any feedback, please post them to the Comments section here or in the blogs referenced in this article. Summary MySQL Cluster 7.2 is the GA, production-ready release of MySQL Cluster. The first Development Release of MySQL Cluster 7.3 and the Early Access previews give you the opportunity to preview and evaluate future developments in the MySQL Cluster database, and we are very excited to be able to share that with you. Let us know how you get along with MySQL Cluster 7.3, and other features that you want to see in future releases, by using the comments of this blog.

  Read the article

• Kaiden and the Arachnoid Cyst

  - by Martin Hinshelwood

  Some of you may remember when my son Kaiden was born I posted pictures of him and his sister. Kaiden is now 15 months old and is progressing perfectly in every area except that and we had been worried that he was not walking yet. We were only really concerned as his sister was walking at 8 months. Figure: Kai as his usual self   Jadie and I were concerned over that and that he had a rather large head (noggin) so we talked to various GP’s and our health visitor who immediately dismissed our concerns every time. That was until about two months ago when we happened to get a GP whose daughter had Hyper Mobility and she recognised the symptoms immediately. We were referred to the Southbank clinic who were lovely and the paediatrician confirmed that he had Hyper Mobility after testing all of his faculties. This just means that his joints are overly mobile and would need a little physiotherapy to help him out. At the end the paediatrician remarked offhand that he has a rather large head and wanted to measure it. Sure enough he was a good margin above the highest percentile mark for his height and weight. The paediatrician showed the measurements to a paediatric consultant who, as a precautionary measure, referred us for an MRI at Yorkhill Children's hospital. Now, Yorkhill has always been fantastic to us, and this was no exception. You know we have NEVER had a correct diagnosis for the kids (with the exception of the above) from a GP and indeed twice have been proscribed incorrect medication that made the kids sicker! We now always go strait to Yorkhill to save them having to fix GP mistakes as well. Monday 24th May, 7pm The scan went fantastically, with Kaiden sleeping in the MRI machine for all but 5 minutes at the end where he waited patiently for it to finish. We were not expecting anything to be wrong as this was just a precautionary scan to make sure that nothing in his head was affecting his gross motor skills. After the scan we were told to expect a call towards the end of the week… Tuesday 25th May, 12pm The very next day we got a call from Southbank who said that they has found an Arachnoid Cyst and could we come in the next day to see a Consultant and that Kai would need an operation. Wednesday 26th May, 12:30pm We went into the Southbank clinic and spoke to the paediatric consultant who assured us that it was operable but that it was taking up considerable space in Kai’s head. Cerebrospinal fluid is building up as a cyst is blocking the channels it uses to drain. Thankfully they told us that prospects were good and that Kai would expect to make a full recovery before showing us the MRI pictures. Figure: Normal brain MRI cross section. This normal scan shows the spaces in the middle of the brain that contain and produce the Cerebrospinal fluid. Figure: Normal Cerebrospinal Flow This fluid is needed by the brain but is drained in the middle down the spinal column. Figure: Kai’s cyst blocking the four channels. I do not think that I need to explain the difference between the healthy picture and Kai’s picture. However you can see in this first picture the faint outline of the cyst in the middle that is blocking the four channels from draining. After seeing the scans a Neurosurgeon has decided that he is not acute, but needs an operation to unblock the flow. Figure: OMFG! You can see in the second picture the effect of the build up of fluid. If I was not horrified by the first picture I was seriously horrified by this one. What next? Kai is not presenting the symptoms of vomiting or listlessness that would show an immediate problem and as such we will get an appointment to see the Paediatric Neurosurgeon at the Southern General hospital in about 4 weeks. This timescale is based on the Neurosurgeon seeing the scans. After that Kai will need an operation to release the pressure and either remove the cyst completely or put in a permanent shunt (tube from brain to stomach) to bypass the blockage. We have updated his notes for the referral with additional recent information on top of the scan that the consultant things will help improve the timescales, but that is just a guess.   All we can do now is wait and see, and be watchful for tell tail signs of listlessness, eye problems and vomiting that would signify a worsening of his condition.   Technorati Tags: Personal

  Read the article

• Tweaking a few URL validation settings on ASP.NET v4.0

  - by Carlyle Dacosta

  ASP.NET has a few default settings for URLs out of the box. These can be configured quite easily in the web.config file within the  <system.web>/<httpRuntime> configuration section. Some of these are: <httpRuntime maxUrlLength=”<number here>”. This number should be an integer value (defaults to 260 characters). The value must be greater than or equal to zero, though obviously small values will lead to an un-useable website. This attribute gates the length of the Url without query string. <httpRuntime maxQueryStringLength=”<number here>”. This number should be an integer value (defaults to 2048 characters). The value must be greater than or equal to zero, though obviously small values will lead to an un-useable website. <httpRuntime requestPathInvalidCharacters=”List of characters you need included in ASP.NETs validation checks”. By default the characters are “<,>,*,%,&,:,\,?”. However once can easily change this by setting by modifying web.config. Remember, these characters can be specified in a variety of formats. For example, I want the character ‘!’ to be included in ASP.NETs URL validation logic. So I set the following: <httpRuntime requestPathInvalidCharacters=”<,>,*,%,&,:,\,?,!”. A character could also be specified in its xml encoded form. ‘&lt;;’ would mean the ‘<’ sign). I could specify the ‘!’ in its xml encoded unicode format such as requestPathInvalidCharacters=”<,>,*,%,&,:,\,?,$#x0021;” or I could specify it in its unicode encoded form or in the “<,>,*,%,&,:,\,?,%u0021” format. The following settings can be applied at Root Web.Config level, App Web.config level, Folder level or within a location tag: <location path="some path here"> <system.web> <httpRuntime maxUrlLength="" maxQueryStringLength="" requestPathInvalidChars="" .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } If any of the above settings fail request validation, an Http 400 “Bad Request” HttpException is thrown. These can be easily handled on the Application_Error handler on Global.asax.   Also, a new attribute in <httpRuntime /> called “relaxedUrlToFileSystemMapping” has been added with a default of false. <httpRuntime … relaxedUrlToFileSystemMapping="true|false" /> When the relaxedUrlToFileSystemMapping attribute is set to false inbound Urls still need to be valid NTFS file paths. For example Urls (sans query string) need to be less than 260 characters; no path segment within a Url can use old-style DOS device names (LPT1, COM1, etc…); Urls must be valid Windows file paths. A url like “http://digg.com/http://cnn.com” should work with this attribute set to true (of course a few characters will need to be unblocked by removing them from requestPathInvalidCharacters="" above). Managed configuration for non-NTFS-compliant Urls is determined from the first valid configuration path found when walking up the path segments of the Url. For example, if the request Url is "/foo/bar/baz/<blah>data</blah>", and there is a web.config in the "/foo/bar" directory, then the managed configuration for the request comes from merging the configuration hierarchy to include the web.config from "/foo/bar". The value of the public property HttpRequest.PhysicalPath is set to [physical file path of the application root] + "REQUEST_URL_IS_NOT_A_VALID_FILESYSTEM_PATH". For example, given a request Url like "/foo/bar/baz/<blah>data</blah>", where the application root is "/foo/bar" and the physical file path for that root is "c:\inetpub\wwwroot\foo\bar", then PhysicalPath would be "c:\inetpub\wwwroot\foo\bar\ REQUEST_URL_IS_NOT_A_VALID_FILESYSTEM_PATH". Carl Dacosta ASP.NET QA Team

  Read the article

• Create a Persistent Bootable Ubuntu USB Flash Drive

  - by Trevor Bekolay

  Don’t feel like reinstalling an antivirus program every time you boot up your Ubuntu flash drive? We’ll show you how to create a bootable Ubuntu flash drive that will remember your settings, installed programs, and more! Previously, we showed you how to create a bootable Ubuntu flash drive that would reset to its initial state every time you booted it up. This is great if you’re worried about messing something up, and want to start fresh every time you start tinkering with Ubuntu. However, if you’re using the Ubuntu flash drive to diagnose and solve problems with your PC, you might find that a lot of problems require guess-and-test cycles. It would be great if the settings you change in Ubuntu and the programs you install stay installed the next time you boot it up. Fortunately, Universal USB Installer, a great little program from Pen Drive Linux, can do just that! Note: You will need a USB drive at least 2 GB large. Make sure you back up any files on the flash drive because this process will format the drive, removing any files currently on it. Once Ubuntu has been installed on the flash drive, you can move those files back if there is enough space. Put Ubuntu on your flash drive Universal-USB-Installer.exe does not need to be installed, so just double click on it to run it wherever you downloaded it. Click Yes if you get a UAC prompt, and you will be greeted with this window. Click I Agree. In the drop-down box on the next screen, select Ubuntu 9.10 Desktop i386. Don’t worry if you normally use 64-bit operating systems – the 32-bit version of Ubuntu 9.10 will still work fine. Some useful tools do not have 64-bit versions, so unless you’re planning on switching to Ubuntu permanently, the 32-bit version will work best. If you don’t have a copy of the Ubuntu 9.10 CD downloaded, then click on the checkbox to Download the ISO. You’ll be prompted to launch a web browser; click Yes. The download should start immediately. When it’s finished, return the the Universal USB Installer and click on Browse to navigate to the ISO file you just downloaded. Click OK and the text field will be populated with the path to the ISO file. Select the drive letter that corresponds to the flash drive that you would like to use from the dropdown box. If you’ve backed up the files on this drive, we recommend checking the box to format the drive. Finally, you have to choose how much space you would like to set aside for the settings and programs that will be stored on the flash drive. Considering that Ubuntu itself only takes up around 700 MB, 1 GB should be plenty, but we’re choosing 2 GB in this example because we have lots of space on this USB drive. Click on the Create button and then make yourself a sandwich – it will take some time to install no matter how fast your PC is. Eventually it will finish. Click Close. Now you have a flash drive that will boot into a fully capable Ubuntu installation, and any changes you make will persist the next time you boot it up! Boot into Ubuntu If you’re not sure how to set your computer to boot using the USB drive, then check out the How to Boot Into Ubuntu section of our previous article on creating bootable USB drives, or refer to your motherboard’s manual. Once your computer is set to boot using the USB drive, you’ll be greeted with splash screen with some options. Press Enter to boot into Ubuntu. The first time you do this, it may take some time to boot up. Fortunately, we’ve found that the process speeds up on subsequent boots. You’ll be greeted with the Ubuntu desktop. Now, if you change settings like the desktop resolution, or install a program, those changes will be permanently stored on the USB drive! We installed avast! Antivirus, and on the next boot, found that it was still in the Accessories menu where we left it. Conclusion We think that a bootable Ubuntu USB flash drive is a great tool to have around in case your PC has problems booting otherwise. By having the changes you make persist, you can customize your Ubuntu installation to be the ultimate computer repair toolkit! Download Universal USB Installer from Pen Drive Linux Similar Articles Productive Geek Tips Create a Bootable Ubuntu USB Flash Drive the Easy WayCreate a Bootable Ubuntu 9.10 USB Flash DriveReset Your Ubuntu Password Easily from the Live CDHow-To Geek on Lifehacker: Control Your Computer with Shortcuts & Speed Up Vista SetupHow To Setup a USB Flash Drive to Install Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Test Drive Windows 7 Online Download Wallpapers From National Geographic Site Spyware Blaster v4.3 Yes, it’s Patch Tuesday Generate Stunning Tag Clouds With Tagxedo Install, Remove and HIDE Fonts in Windows 7

  Read the article

• ODI SDK: Retrieving Information From the Logs

  - by Christophe Dupupet

  It is fairly common to want to retrieve data from the ODI logs: statistics, execution status, even the generated code can be retrieved from the logs. The ODI SDK provides a robust set of APIs to parse the repository and retreve such information. To locate the information you are looking for, you have to keep in mind the structure of the logs: sessions contain steps; steps containt tasks. The session is the execution unit: basically, each time you execute something (interface, package, procedure, scenario) you create a new session. The steps are the individual entries found in a session: these will be the icons in your package for instance. Or if you are running an interface, you will have one single step: the interface itself. The tasks will represent the more atomic elements of the steps: the individual DDL, DML, scripts and so forth that are generated by ODI, along with all the detailed statistics for that task. All these details can be retrieved with the SDK. Because I had a question recently on the API ODIStepReport, I focus explicitly in this code on Scenario logs, but a lot more can be done with these APIs. Here is the code sample (you can just cut and paste that code in your ODI 11.1.1.6 Groovy console). Just save, adapt the code to your environment (in particular to connect to your repository) and hit "run" //Created by ODI Studioimport oracle.odi.core.OdiInstanceimport oracle.odi.core.config.OdiInstanceConfigimport oracle.odi.core.config.MasterRepositoryDbInfo import oracle.odi.core.config.WorkRepositoryDbInfo import oracle.odi.core.security.Authentication  import oracle.odi.core.config.PoolingAttributes import oracle.odi.domain.runtime.scenario.finder.IOdiScenarioFinder import oracle.odi.domain.runtime.scenario.OdiScenario import java.util.Collection import java.io.* /* ----------------------------------------------------------------------------------------- Simple sample code to list all executions of the last version of a scenario,along with detailed steps information----------------------------------------------------------------------------------------- */ /* update the following parameters to match your environment => */def url = "jdbc:oracle:thin:@myserver:1521:orcl"def driver = "oracle.jdbc.OracleDriver"def schema = "ODIM1116"def schemapwd = "ODIM1116PWD"def workrep = "WORKREP1116"def odiuser= "SUPERVISOR"def odiuserpwd = "SUNOPSIS" // Rather than hardcoding the project code and folder name, // a great improvement here would be to parse the entire repository def scenario_name = "LOAD_DWH" /*Scenario Name*/ /* <=End of the update section */ //--------------------------------------//Connection to the repository// Note for ODI 11.1.1.6: you could use predefined odiInstance variable if you are // running the script from a Studio that is already connected to the repository def masterInfo = new MasterRepositoryDbInfo(url, driver, schema, schemapwd.toCharArray(), new PoolingAttributes())def workInfo = new WorkRepositoryDbInfo(workrep, new PoolingAttributes())def odiInstance = OdiInstance.createInstance(new OdiInstanceConfig(masterInfo, workInfo)) //--------------------------------------// In all cases, we need to make sure we have authorized access to the repositorydef auth = odiInstance.getSecurityManager().createAuthentication(odiuser, odiuserpwd.toCharArray())odiInstance.getSecurityManager().setCurrentThreadAuthentication(auth) //--------------------------------------// Retrieve the scenario we are looking fordef odiScenario = ((IOdiScenarioFinder)odiInstance.getTransactionalEntityManager().getFinder(OdiScenario.class)).findLatestByName(scenario_name) if (odiScenario == null){    println("Error: cannot find scenario "+scenario_name);    return} //--------------------------------------// Retrieve all reports for the scenario def OdiScenarioReportsList = odiScenario.getScenarioReports() println("*** Listing all reports for Scenario \""+scenario_name+"\" ") //--------------------------------------// For each report, print the folowing:// - start time// - duration// - status// - step reports: selection of details for (s in OdiScenarioReportsList){        println("\tStart time: " + s.getSessionStartTime())        println("\tDuration: " + s.getSessionDuration())        println("\tStatus: " + s.getSessionStatus())                def OdiScenarioStepReportsList = s.getStepReports()        for (st in OdiScenarioStepReportsList){            println("\t\tStep Name: " + st.getStepName())            println("\t\tStep Resource Name: " + st.getStepResourceName())            println("\t\tStep Start time: " + st.getStepStartTime())            println("\t\tStep Duration: " + st.getStepDuration())            println("\t\tStep Status: " + st.getStepStatus())            println("\t\tStep # of inserts: " + st.getStepInsertCount())            println("\t\tStep # of updates: " + st.getStepUpdateCount()+'\n')      }      println("\t")}

  Read the article

• My Interview with Microsoft

  - by Victor Hurdugaci

  This post is for those who want to apply or have already applied (but not finished the interview) for a Microsoft Job. The recruitment process is quite similar for everyone and consists of a few steps. Application E-Mail Interview Phone Interview On Site Interview I will tell you my story and how I went through the four phases. 1. Application My blog's title (Ex Nihilo Nihil Fit) means "Nothing Comes Out of Nothing". You can't get a job at Microsoft by not doing anything - this is true for anything else. The first step you need to complete is the application process. For this, many options are available. You can... ... apply online on Microsoft's Careers website as I did ... send your CV to different e-mail addresses (there are some dedicated e-mails for different positions) ... apply through some 3rd party organization (job shop, campus recruitment, job agency, etc) On MS Careers you just have to post your CV and choose the job you want. That's all! No recommendation letter, no cover letter, no nothing. Of course, not every CV passes the selection process. Here are some tips for improving your resume (worked for me): Don't write it just before applying! Write a draft version, wait a few days and then review it. This way you will find a lot of mistakes and stupid things you wrote initially. If you review it immediately after writing, your mind will not be criticism oriented and will just ignore mistakes. Repeat the write-wait-review process as many times as necessary, until you find that the review revealed no mistakes. After you did the final review and the CV is bullet-proof, ask others to review it. They will definitely find inconsistencies and mistakes and this will make you feel stupid. This is good because will open your eyes will make you go into an 'I want to improve' mode. You'll try to correct everything. After you come up with a modified version go again through steps 1 and 2. Repeat this as many times as necessary. [Special thanks to Lucian Sasu, Nadia Comanici, Andrei Ciobanu, Monica Balan and Lavinia Tanase for reviewing my CV!] Make it short and give only relevant facts. Initially, I come up with a 5 pages CV because I wrote every single technology with which I worked. There were a lot irrelevant things, I wrote Windows Workflow Foundation just because I played with it for a few days. I added extensive descriptions for every project, made a personal details section (name, birth date, address, etc) of 1/2 page. Others suggested to cut everything that was not necessary. You don't need to give extensive descriptions, just add a few words. For example, I wrote "VS Image Visualizer - Visual Studio 2008 debug visualizer for images" and added a link to the project's page - you submit formatted andcan embed links. Add something that makes it different. I don't know if this makes a difference, but I added some lines to separate items just like in the picture below. Definitely Microsoft gets thousands of CVs per day. You need something special. Don't lie! Tell exactly what you did and what is the proficiency level of your skills. For example, don't write "Advanced" for UML if you don't know the difference between composition and aggregation. Be realistic and don't under/over estimate yourself. Use the spell chick. Make sure everything is written in correct English and there are no grammar/spelling mistakes. Noddy likes a WC with grammar mi takes. You mght fail just because of that. Once you completed your CV, choose the job that suits best your needs, apply and wait... The waiting is a problem because all these big companies like Microsoft, Google, Mozilla, Apple, etc. will contact you only if they find something interesting in your application. If you're not suitable, then no rejection is sent. I applied for an Intern Software Development Engineer position at Microsoft Redmond. I cannot apply for a full time position because I want to finish the master program on time, in the next summer - an internship is just what I need. 2. E-Mail Interview January 20, 2010. Two months since I submitted the CV. I wasn't hoping anymore that MS will contact me, when I got an e-mail titled: "Victor Hurdugaci ES DK" from Holly Peterson saying: Read more >>

  Read the article

• Trace File Source Adapter

  The Trace File Source adapter is a useful addition to your SSIS toolbox.  It allows you to read 2005 and 2008 profiler traces stored as .trc files and read them into the Data Flow.  From there you can perform filtering and analysis using the power of SSIS. There is no need for a SQL Server connection this just uses the trace file. Example Usages Cache warming for SQL Server Analysis Services Reading the flight recorder Find out the longest running queries on a server Analyze statements for CPU, memory by user or some other criteria you choose Properties The Trace File Source adapter has two properties, both of which combine to control the source trace file that is read at runtime. SQL Server 2005 and SQL Server 2008 trace files are supported for both the Database Engine (SQL Server) and Analysis Services. The properties are managed by the Editor form or can be set directly from the Properties Grid in Visual Studio. Property Type Description AccessMode Enumeration This property determines how the Filename property is interpreted. The values available are: DirectInput Variable Filename String This property holds the path for trace file to load (*.trc). The value is either a full path, or the name of a variable which contains the full path to the trace file, depending on the AccessMode property. Trace Column Definition Hopefully the majority of you can skip this section entirely, but if you encounter some problems processing a trace file this may explain it and allow you to fix the problem. The component is built upon the trace management API provided by Microsoft. Unfortunately API methods that expose the schema of a trace file have known issues and are unreliable, put simply the data often differs from what was specified. To overcome these limitations the component uses  some simple XML files. These files enable the trace column data types and sizing attributes to be overridden. For example SQL Server Profiler or TMO generated structures define EventClass as an integer, but the real value is a string. TraceDataColumnsSQL.xml  - SQL Server Database Engine Trace Columns TraceDataColumnsAS.xml    - SQL Server Analysis Services Trace Columns The files can be found in the %ProgramFiles%\Microsoft SQL Server\100\DTS\PipelineComponents folder, e.g. "C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TraceDataColumnsSQL.xml" "C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TraceDataColumnsAS.xml" If at runtime the component encounters a type conversion or sizing error it is most likely due to a discrepancy between the column definition as reported by the API and the actual value encountered. Whilst most common issues have already been fixed through these files we have implemented specific exception traps to direct you to the files to enable you to fix any further issues due to different usage or data scenarios that we have not tested. An example error that you can fix through these files is shown below. Buffer exception writing value to column 'Column Name'. The string value is 999 characters in length, the column is only 111. Columns can be overridden by the TraceDataColumns XML files in "C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TraceDataColumnsAS.xml". Installation The component is provided as an MSI file which you can download and run to install it. This simply places the files on disk in the correct locations and also installs the assemblies in the Global Assembly Cache as per Microsoft’s recommendations. You may need to restart the SQL Server Integration Services service, as this caches information about what components are installed, as well as restarting any open instances of Business Intelligence Development Studio (BIDS) / Visual Studio that you may be using to build your SSIS packages. Finally you will have to add the transformation to the Visual Studio toolbox manually. Right-click the toolbox, and select Choose Items.... Select the SSIS Data Flow Items tab, and then check the Trace File Source transformation in the Choose Toolbox Items window. This process has been described in detail in the related FAQ entry for How do I install a task or transform component? We recommend you follow best practice and apply the current Microsoft SQL Server Service pack to your SQL Server servers and workstations. Please note that the Microsoft Trace classes used in the component are not supported on 64-bit platforms. To use the Trace File Source on a 64-bit host you need to ensure you have the 32-bit (x86) tools available, and the way you execute your package is setup to use them, please see the help topic 64-bit Considerations for Integration Services for more details. Downloads Trace Sources for SQL Server 2005 -- Trace Sources for SQL Server 2008 Version History SQL Server 2008 Version 2.0.0.382 - SQL Sever 2008 public release. (9 Apr 2009) SQL Server 2005 Version 1.0.0.321 - SQL Server 2005 public release. (18 Nov 2008) -- Screenshots

  Read the article

• How to customise search core results web part Part1

  - by ybbest

  In this post, I’d like to show you how to customise search core results web part. It is a quite simple, most of the times what you need to do is to change the xslt to perform the changes. Here are the steps: 1. You need to change the xslt to the following, so that you can see the raw xml. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" > <xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes" /> <xsl:template match="/"> <xmp><xsl:copy-of select="*"/></xmp> </xsl:template> </xsl:stylesheet> a. To do so , you need to go to edit page>>Edit search core results web part >>Display Properties and then untick use Location Visualization b. Open the xslt editor and copy the existing XSLT code to your preferred xslt editor so that you can customise it. c. Now you can paste in the XSLT code above. 2.Perform the search after you have completed step1 and you will see the search results returned in raw xml <All_Results> <Result> <id>1</id> <workid>678</workid> <rank>100000000</rank> <title>Ybbest</title> <author></author> <size>137531</size> <url>http://ybbest</url> <urlEncoded>http%3A%2F%2Fybbest</urlEncoded> <description>Ybbest test site</description> <write>3/17/2012</write> <sitename>http://ybbest</sitename> <collapsingstatus>0</collapsingstatus> <hithighlightedsummary> <c0>Ybbest</c0> test site <ddd /> Add a new image, change this welcome text or add new lists to this page by clicking the edit button above. You can click on Shared Documents to add files or on the <ddd /> </hithighlightedsummary> <hithighlightedproperties> <HHTitle> <c0>Ybbest</c0> </HHTitle> <HHUrl>http://<c0>ybbest</c0></HHUrl> </hithighlightedproperties> <contentclass>STS_Site</contentclass> <isdocument>False</isdocument> <picturethumbnailurl></picturethumbnailurl> <popularsocialtags /> <picturewidth>0</picturewidth> <pictureheight>0</pictureheight> <datepicturetaken></datepicturetaken> <serverredirectedurl></serverredirectedurl> <fileextension></fileextension> <ows_metadatafacetinfo></ows_metadatafacetinfo> <imageurl imageurldescription="SharePoint Site Collection">/_layouts/images/siteicon_16x16.png</imageurl> </Result> <TotalResults>69</TotalResults> <NumberOfResults>50</NumberOfResults> </All_Results> 3. Then you can read what has been returned in the raw xml and start modifying the xslt to customise your search results page. 4.You can also link an external xslt to the web part.It can be set in the Miscellaneous of Web Part section. You can also set it pragmatically using a feature receiver , you can download the source code to do so here. References: http://stackoverflow.com/questions/6548104/change-xslt-of-the-searchresultwebpart-during-the-featureactivated http://www.dotnetmafia.com/blogs/dotnettipoftheday/archive/2010/04/05/a-quick-guide-to-coreresultswebpart-configuration-changes-in-sharepoint-2010.aspx http://www.tonytestasworld.com/post/2011/01/30/HowTo-display-SharePoint-Search-results-as-raw-XML.aspx

  Read the article

• Use Advanced Font Ligatures in Office 2010

  - by Matthew Guay

  Fonts can help your documents stand out and be easier to read, and Office 2010 helps you take your fonts even further with support for OpenType ligatures, stylistic sets, and more.  Here’s a quick look at these new font features in Office 2010. Introduction Starting with Windows 7, Microsoft has made an effort to support more advanced font features across their products.  Windows 7 includes support for advanced OpenType font features and laid the groundwork for advanced font support in programs with the new DirectWrite subsystem.  It also includes the new font Gabriola, which includes an incredible number of beautiful stylistic sets and ligatures. Now, with the upcoming release of Office 2010, Microsoft is bringing advanced typographical features to the Office programs we love.  This includes support for OpenType ligatures, stylistic sets, number forms, contextual alternative characters, and more.  These new features are available in Word, Outlook, and Publisher 2010, and work the same on Windows XP, Vista and Windows 7. Please note that Windows does include several OpenType fonts that include these advanced features.  Calibri, Cambria, Constantia, and Corbel all include multiple number forms, while Consolas, Palatino Linotype, and Gabriola (Windows 7 only) include all the OpenType features.  And, of course, these new features will work great with any other OpenType fonts you have that contain advanced ligatures, stylistic sets, and number forms. Using advanced typography in Word To use the new font features, open a new document, select an OpenType font, and enter some text.  Here we have Word 2010 in Windows 7 with some random text in the Gabriola font.  Click the arrow on the bottom of the Font section of the ribbon to open the font properties. Alternately, select the text and click Font. Now, click on the Advanced tab to see the OpenType features. You can change the ligatures setting… Choose Proportional or Tabular number spacing… And even select Lining or Old-style number forms. Here’s a comparison of Lining and Old-style number forms in Word 2010 with the Calibri font. Finally, you can choose various Stylistic sets for your font.  The dialog always shows 20 styles, whether or not your font includes that many.  Most include only 1 or 2; Gabriola includes 6. Here’s lorem ipsum text, using the Gabriola font with Stylistic set 6. Impressive, huh?  The font ligatures change based on context, so they will automatically change as you are typing.  Watch the transition as we typed the word Microsoft in Word with Gabriola stylistic set 6. Here’s another example, showing the fi and tt ligatures in Calibri. These effects work great in Word 2010 in XP, too. And, since Outlook uses Word as it’s editing engine, you can use the same options in Outlook 2010.  Note that these font effects may not show up the same if the recipient’s email client doesn’t support advanced OpenType typography.  It will, of course, display perfectly if the recipient is using Outlook 2010. Using advanced typography in Publisher 2010 Publisher 2010 includes the same advanced font features.  This is especially nice for those using Publisher for professional layout and design.  Simply insert a text box, enter some text, select it, and click the arrow on the bottom of the font box as in Word to open the font properties. This font options dialog is actually more advanced than Word’s font options.  You can preview your font changes on sample text right in the properties box.  You can also choose to add or remove a swash from your characters.   Conclusion Advanced typographical effects are a welcome addition to Word and Publisher 2010, and they are very impressive when coupled with modern fonts such as Gabriola.  From designing elegant headers to using old-style numbers, these features are very useful and fun. Do you have a favorite OpenType font that includes advanced typographical features?  Let us know in the comments! More Reading Advances in typography in Windows 7 – Engineering 7 Blog New features in Microsoft Word 2010 Similar Articles Productive Geek Tips Change the Default Font in Excel 2007Ask the Readers: Do You Use a Laptop, Desktop, or Both?Keep Websites From Using Tiny Fonts in SafariAdd or Remove Apps from the Microsoft Office 2007 or 2010 SuiteFriday Fun: Desktop Tower Defense Pro TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional SpeedyFox Claims to Speed up your Firefox Beware Hover Kitties Test Drive Mobile Phones Online With TryPhone Ben & Jerry’s Free Cone Day, 3/23/10 New Stinger from McAfee Helps Remove ‘FakeAlert’ Threats Google Apps Marketplace: Tools & Services For Google Apps Users

  Read the article

• Creating an ASP.NET report using Visual Studio 2010 - Part 2

  - by rajbk

  We continue building our report in this three part series. Creating an ASP.NET report using Visual Studio 2010 - Part 1 Creating an ASP.NET report using Visual Studio 2010 - Part 3 Creating the Client Report Definition file (RDLC) Add a folder called “RDLC”. This will hold our RDLC report.   Right click on the RDLC folder, select “Add new item..” and add an “RDLC” name of “Products”. We will use the “Report Wizard” to walk us through the steps of creating the RDLC.   In the next dialog, give the dataset a name called “ProductDataSet”. Change the data source to “NorthwindReports.DAL” and select “ProductRepository(GetProductsProjected)”. The fields that are returned from the method are shown on the right. Click next.   Drag and drop the ProductName, CategoryName, UnitPrice and Discontinued into the Values container. Note that you can create much more complex grouping using this UI. Click Next.   Most of the selections on this screen are grayed out because we did not choose a grouping in the previous screen. Click next. Choose a style for your report. Click next. The report graphic design surface is now visible. Right click on the report and add a page header and page footer. With the report design surface active, drag and drop a TextBox from the tool box to the page header. Drag one more textbox to the page header. We will use the text boxes to add some header text as shown in the next figure. You can change the font size and other properties of the textboxes using the formatting tool bar (marked in red). You can also resize the columns by moving your cursor in between columns and dragging. Adding Expressions Add two more text boxes to the page footer. We will use these to add the time the report was generated and page numbers. Right click on the first textbox in the page footer and select “Expression”. Add the following expression for the print date (note the = sign at the left of the expression in the dialog below) "© Northwind Traders " & Format(Now(),"MM/dd/yyyy hh:mm tt") Right click on the second text box and add the following for the page count.   Globals.PageNumber & " of " & Globals.TotalPages Formatting the page footer is complete.   We are now going to format the “Unit Price” column so it displays the number in currency format.  Right click on the [UnitPrice] column (not header) and select “Text Box Properties..” Under “Number”, select “Currency”. Hit OK. Adding a chart With the design surface active, go to the toolbox and drag and drop a chart control. You will need to move the product list table down first to make space for the chart contorl. The document can also be resized by dragging on the corner or at the page header/footer separator. In the next dialog, pick the first chart type. This can be changed later if needed. Click OK. The chart gets added to the design surface.   Click on the blue bars in the chart (not legend). This will bring up drop locations for dropping the fields. Drag and drop the UnitPrice and CategoryName into the top (y axis) and bottom (x axis) as shown below. This will give us the total unit prices for a given category. That is the best I could come up with as far as what report to render, sorry :-) Delete the legend area to get more screen estate. Resize the chart to your liking. Change the header, x axis and y axis text by double clicking on those areas. We made it this far. Let’s impress the client by adding a gradient to the bar graph :-) Right click on the blue bar and select “Series properties”. Under “Fill”, add a color and secondary color and select the Gradient style. We are done designing our report. In the next section you will see how to add the report to the report viewer control, bind to the data and make it refresh when the filter criteria are changed.   Creating an ASP.NET report using Visual Studio 2010 - Part 3

  Read the article

• ICC Cricket World Cup 2011- Free Online Live Streaming, Mobile Apps, TV and Radio Guide

  - by Kavitha

  The ICC Cricket World Cup 2011 will be hosted jointly by Bangladesh, India and Sri Lanka. This 10th edition of World Cup is held between 19 February-2 April 2011. The World Cup drive will be starting in Dhaka on 19 February with the inaugural match between India and Bangladesh. The 43 days long ICC World Cup Cricket 2011 event will host 49 matches, day matches starting as early as 9.30am IST and day-night matches starting at 2.30pm IST. Here is our guide to follow 2011 ICC Cricket World Cup live on your computers, televisions,mobiles and radios Free Live Streaming On The Web (Official & Unofficial) http://espnstar.com will live stream all the matches of World Cup 2011 and they will be available in HD quality as they are the official broadcasters of World Cup 2011 cricket event. This is the first time ever a world cup cricket event is streamed online officially. If you are not able to access the official live streaming of Cricket World Cup due to regional restrictions, point your browser to any of the following unofficial live streams on the web. NOTE: MAKE SURE THAT YOUR ANTIVIRUS and ANTIMALWARE software are up and running before opening any of these sites. crictime.com - this site offers 6 live streaming servers that offer World Cup 2011 Cricket matches streams. Don’t mind the ads that are displayed left,right and center and just enjoy the cricket. Web pages dedicated for the world cup streaming are already live and you can bookmark them for your reference. cricfire.com/live-cricket: cricfire   gathers cricket live streams available around the web and provides them for easy access. Also they provide links for watching highlights and other post match analysis shows. Other sites that provide live streaming videos extracover.net webcric.com Searching for Unofficial Streams On Live Video Streaming Sites One of the best ways to find the unofficial streams is look for live streaming feeds on popular video streaming websites. We can be assured that these sites does not spread malware and spammy ads as they are well established. Here are the queries that you can use to search the popular sites FreedoCast  http://freedocast.com/search.aspx?go=cricket%20world%20cup Justin.tv      http://www.justin.tv/search?q=cricket+world+cup Ustream.tv  http://www.ustream.tv/discovery/live/all?q=cricket%20world%20cup TV Channels That Telecast Cricket World Cup Live Even though web is the place where we spend most of our time for entertainment, TVs are still popular for watching sports events. Mostly 90% of us are going to follow this cricket world cup matches on television sets. Here is the list of TV channels that paid whooping amounts of money for broadcasting rights and going to telecast live cricket Afghanistan – Ariana Television Network: Lemar TV Australia – Nine Network, Fox Sports Bangladesh – Bangladesh Television Canada – Asian Television Network China – ESPN Star Sports Europe (Except UK & Ireland) – Eurosport2 Fiji – Fiji TV India – ESPN Star Sports, Star Cricket, DD National (mostly India matches alone) Ireland – Zee Cafe Jamaica – Television Jamaica Middle East – Arab Radio and Television Network Nepal – ESPN Star Sports New Zealand – Sky Sport Pacific Islands – Sky Pacific Pakistan – GEO Super, Pakistan Television Corporation Pan-Africa – South African Broadcasting Corporation Singapore – Star Cricket South Africa – Supersport, Sabc3 Sport Sri Lanka – Sri Lanka Rupavahini Corporation United Kingdom – Sky Sports HD USA – Willow Cricket, DirecTV, Dish Network West Indies – Caribbean Media Corporation Radio Stations That Provide Live Commentary Don’t we listen to radio? Yes we still listen to radios, especially when we are on the go. Radios are part of our mobiles as well as music players like iPods. Here are the stations that you can tune into for catching live cricket commentary Australia – ABC Local Radio Bangladesh – Bangladesh Betar Canada , Central America – EchoStar India – All India Radio Pakistan, United Arab Emirates – Hum FM Sri Lanka – FM Derana United Kingdom, Ireland – BBC Radio West Indies – Caribbean Media Corporation Watch World Cup Cricket On Your Mobile This section is for Indian users. 3G rollout is happening at very high pace in all part of the India and most of the metros and towns are able to access 3G services. With 3G on your mobile you will be able to watch live ICC world cricket on your Reliance Mobiles and you can read more about it here. Top 10 Cricket Websites Check out our earlier post on top 10 cricket web sites for information. This article titled,ICC Cricket World Cup 2011- Free Online Live Streaming, Mobile Apps, TV and Radio Guide, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

  Read the article

• Tweaking a few URL validation settings on ASP.NET v4.0

  - by Carlyle Dacosta

  ASP.NET has a few default settings for URLs out of the box. These can be configured quite easily in the web.config file within the  <system.web>/<httpRuntime> configuration section. Some of these are: <httpRuntime maxUrlLength=”<number here>” This number should be an integer value (defaults to 260 characters). The value must be greater than or equal to zero, though obviously small values will lead to an un-useable website. This attribute gates the length of the Url without query string. <httpRuntime maxQueryStringLength=”<number here>”. This number should be an integer value (defaults to 2048 characters). The value must be greater than or equal to zero, though obviously small values will lead to an un-useable website. <httpRuntime requestPathInvalidCharacters=”List of characters you need included in ASP.NETs validation checks” /> By default the characters are “<,>,*,%,&,:,\,?”. However once can easily change this by setting by modifying web.config. Remember, these characters can be specified in a variety of formats. For example, I want the character ‘!’ to be included in ASP.NETs URL validation logic. So I set the following: <httpRuntime requestPathInvalidCharacters=”<,>,*,%,&,:,\,?,!”. A character could also be specified in its xml encoded form. ‘&lt;;’ would mean the ‘<’ sign). I could specify the ‘!’ in its xml encoded unicode format such as requestPathInvalidCharacters=”<,>,*,%,&,:,\,?,$#x0021;” or I could specify it in its unicode encoded form or in the “<,>,*,%,&,:,\,?,%u0021” format. The following settings can be applied at Root Web.Config level, App Web.config level, Folder level or within a location tag: <location path="some path here"> <system.web> <httpRuntime maxUrlLength="" maxQueryStringLength="" requestPathInvalidChars="" /> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } If any of the above settings fail request validation, an Http 400 “Bad Request” HttpException is thrown. These can be easily handled on the Application_Error handler on Global.asax.   Also, a new attribute in <httpRuntime /> called “relaxedUrlToFileSystemMapping” has been added with a default of false. <httpRuntime … relaxedUrlToFileSystemMapping="true|false" /> When the relaxedUrlToFileSystemMapping attribute is set to false inbound Urls still need to be valid NTFS file paths. For example Urls (sans query string) need to be less than 260 characters; no path segment within a Url can use old-style DOS device names (LPT1, COM1, etc…); Urls must be valid Windows file paths. A url like “http://digg.com/http://cnn.com” should work with this attribute set to true (of course a few characters will need to be unblocked by removing them from requestPathInvalidCharacters="" above). Managed configuration for non-NTFS-compliant Urls is determined from the first valid configuration path found when walking up the path segments of the Url. For example, if the request Url is "/foo/bar/baz/<blah>data</blah>", and there is a web.config in the "/foo/bar" directory, then the managed configuration for the request comes from merging the configuration hierarchy to include the web.config from "/foo/bar". The value of the public property HttpRequest.PhysicalPath is set to [physical file path of the application root] + "REQUEST_URL_IS_NOT_A_VALID_FILESYSTEM_PATH". For example, given a request Url like "/foo/bar/baz/<blah>data</blah>", where the application root is "/foo/bar" and the physical file path for that root is "c:\inetpub\wwwroot\foo\bar", then PhysicalPath would be "c:\inetpub\wwwroot\foo\bar\ REQUEST_URL_IS_NOT_A_VALID_FILESYSTEM_PATH".

  Read the article

• Help Protect Your Children with the CEOP Enhanced Internet Explorer 8

  - by Asian Angel

  Do you want to make Internet Explorer safer and more helpful for you and family? Then join us as we look at the CEOP (Child Exploitation and Online Protection Centre) enhanced version of Internet Explorer 8. Setting CEOP Up We chose to install the whole CEOP pack in order to have access to complete set of CEOP Tools. The install process will be comprised of two parts…it will begin with CEOP branded windows showing the components being installed… Note: The components can be downloaded separately for those who only want certain CEOP components added to their browser. Then it will move to the traditional Microsoft Internet Explorer 8 install windows. One thing that we did notice is that here you will be told that you will need to restart your computer but in other windows a log off/log on process is mentioned. Just to make certain that everything goes smoothly we recommend restarting your computer when the installation process is complete. In the EULA section you can see the versions of Windows that the CEOP Pack works with. Once you get past the traditional Microsoft install windows you will be dropped back into the CEOP branded windows. CEOP in Action After you have restarted your computer and opened Internet Explorer you will notice that your homepage has been changed. When it comes to your children that is not a bad thing in this instance. It will also give you an opportunity to look through the CEOP online resources. For the moment you may be wondering where everything is but do not worry. First you can find the two new search providers in the drop-down menu for your “Search Bar” and select a new default if desired. The second thing to look for are the new links that have been added to your “Favorites Menu”. These links can definitely be helpful for you and your family. The third part will require your “Favorites Bar” to be visible in order to see the “Click CEOP Button”. If you have not previously done so you will need to turn on subscribing for “Web Slices”. Click on “Yes” to finish the subscription process. Clicking on the “CEOP Button” again will show all kinds of new links to help provide information for you and your children. Notice that the top part is broken down into “topic categories” while the bottom part is set up for “age brackets”…very nice for helping you focus on the information that you want and/or need. Looking for information and help on a particular topic? Clicking on the “Cyberbullying Link” for example will open the following webpage with information about cyberbullying and a link to get help with the problem. Need something that is focused on your child’s age group? Clicking on the “8-10? Link” as an example opened this page. Want information that is focused on you? The “Parent? Link” leads to this page. The “topic categories & age brackets” make the CEOP Button a very helpful and “family friendly” addition to Internet Explorer. Perhaps you (or your child) want to conduct a search for something that is affecting your child. As you type in a “search term” both of the search providers will provide helpful suggestions for dealing with the problem. We felt that these were very nice suggestions in both instances here… Conclusion We have been able to give you a good peek at what the CEOP Tools can do but the best way to see how helpful it can be for you and your family is try it for yourself. Your children’s safety and happiness is worth it. Links Download the Internet Explorer CEOP Pack (link at bottom of webpage) Note: If you are interested in a singular component or only some use these links. Download the Click CEOP Button Download Search CEOP Download Internet Safety and Security Search Similar Articles Productive Geek Tips Mysticgeek Blog: A Look at Internet Explorer 8 Beta 1 on Windows XPWhen to Use Protect Tab vs Lock Tab in FirefoxMake Ctrl+Tab in Internet Explorer 7 Use Most Recent OrderRemove ISP Text or Corporate Branding from Internet Explorer Title BarQuick Hits: 11 Firefox Tab How-Tos TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Download Microsoft Office Help tab The Growth of Citibank Quickly Switch between Tabs in IE Windows Media Player 12: Tweak Video & Sound with Playback Enhancements Own a cell phone, or does a cell phone own you? Make your Joomla & Drupal Sites Mobile with OSMOBI

  Read the article

• Announcing the June 2012 Release of the Ajax Control Toolkit

  - by Stephen.Walther

  I’m excited to announce the June 2012 release of the Ajax Control Toolkit. You can download the new release by visiting http://AjaxControlToolkit.CodePlex.com or (better) download the new release with NuGet: Install-Package AjaxControlToolkit The Ajax Control Toolkit continues to be super popular. The previous release (May 2012) had over 87,000 downloads from CodePlex.com and over 16,000 downloads from NuGet. That’s over 100,000 downloads in less than 2 months. Security Improvements for the HtmlEditorExtender Unfortunately, in the previous release, we made the HtmlEditorExtender too secure! We upgraded the version of the Microsoft Anti-Cross Site Scripting Library included in the Ajax Control Toolkit to the latest version (version 4.2.1) and the latest version turned out to be way too aggressive about stripping HTML. It not only strips dangerous tags such as <script> tags, it also strips innocent tags such as <b> tags. When the latest version of the Microsoft Anti-Cross Site Scripting Library is used with the HtmlEditorExtender, the library strips all rich content from the HtmlEditorExtender control which defeats the purpose of using the control. Therefore, we had to find a replacement for the Microsoft Anti-Cross Site Scripting Library. In this release, we’ve created a new HTML sanitizer built on the HTML Agility Pack. If you were using the AntiXssSanitizerProvider then you will need to substitute the HtmlAgilityPackSanitizerProvider. In particular, you need to modify the sanitizer sections in your Web.config file like this: <configuration> <configSections> <sectionGroup name="system.web"> <section name="sanitizer" requirePermission="false" type="AjaxControlToolkit.Sanitizer.ProviderSanitizerSection, AjaxControlToolkit" /> </sectionGroup> </configSections> <system.web> <sanitizer defaultProvider="HtmlAgilityPackSanitizerProvider"> <providers> <add name="HtmlAgilityPackSanitizerProvider" type="AjaxControlToolkit.Sanitizer.HtmlAgilityPackSanitizerProvider"></add> </providers> </sanitizer> </system.web> </configuration> We made one other backwards-breaking change to improve the security of the HtmlEditorExtender. We want to make sure that users don’t accidently use the HtmlEditorExtender without an HTML sanitizer by accident. Therefore, if you don’t configure a HTML sanitizer provider in the web.config file then you’ll get the following error: If you really want to use the HtmlEditorExtender without using an HTML sanitizer – for example, you are using the HtmlEditorExtender for an Intranet application and you trust all of your fellow employees – then you can explicitly indicate that you don’t want to enable HTML sanitization by setting the EnableSanitization property to false like this: <ajaxToolkit:HtmlEditorExtender TargetControlID="txtComments" EnableSanitization="false" runat="server" /> Please don’t ever set the EnableSanitization property to false for a public website. If you disable HTML sanitization then you are making your website an easy target for Cross-Site Scripting attacks. Lots of Fixes for the ComboBox Control In the latest release, we also made several important bug fixes and feature enhancements to the ComboBox control. Here’s the list of issues that we fixed: 22930 — ComboBox doesn’t close its drop down list when losing input focus to another ComboBox control 23140 — ComboBox Issues – Delete, Backspace, Period 23142 — ComboxBox SelectedIndex = -1 does not clear text 24440 — ComboBox postback on enter 25295 — ComboBox problems when container is hidden at page load 25469 — ComboBox – MaxLength ignored 26686 — Backspace and Delete exception when optionList is null 27148 — Combobox breaks if ClientIDMode is static Fixes to Other Controls In this release, we also made bug fixes and enhancements to the UpdatePanelAnimation, Tabs, and Seadragon controls: 21310 — OnUpdated animation starts before OnUpdating has finished 26690 — Seadragon Control’s openTileSource() method doesn’t work (with fix) Title is required We also fixed an issue with the Tabs control which would result in an InvalidOperation exception. Summary I want to thank the Superexpert team for the hard work that they put into this release. In particular, I want to thank them for their effort in researching, building, and writing unit tests for the HtmlAgilityPack HTML sanitizer.

  Read the article

• SQL – Quick Start with Explorer Sections of NuoDB – Query NuoDB Database

  - by Pinal Dave

  This is the third post in the series of the blog posts I am writing about NuoDB. NuoDB is very innovative and easy-to-use product. I can clearly see how one can scale-out NuoDB with so much ease and confidence. In my very first blog post we discussed how we can install NuoDB (link), and in my second post I discussed how we can manage the NuoDB database transaction engines and storage managers with a few clicks (link). Note: You can Download NuoDB from here. In this post, we will learn how we can use the Explorer feature of NuoDB to do various SQL operations. NuoDB has a browser-based Explorer, which is very powerful and has many of the features any IDE would normally have. Let us see how it works in the following step-by-step tutorial. Let us go to the NuoDBNuoDB Console by typing the following URL in your browser: http://localhost:8080/ It will bring you to the QuickStart screen. Make sure that you have created the sample database. If you have not created sample database, click on Create Database and create it successfully. Now go to the NuoDB Explorer by clicking on the main tab, and it will ask you for your domain username and password. Enter the username as a domain and password as a bird. Alternatively you can also enter username as a quickstart and password as a quickstart. Once you enter the password you will be able to see the databases. In our example we have installed the Sample Database hence you will see the Test database in our Database Hierarchy screen. When you click on database it will ask for the database login. Note that Database Login is different from Domain login and you will have to enter your database login over here. In our case the database username is dba and password is goalie. Once you enter a valid username and password it will display your database. Further expand your database and you will notice various objects in your database. Once you explore various objects, select any database and click on Open. When you click on execute, it will display the SQL script to select the data from the table. The autogenerated script displays entire result set from the database. The NuoDB Explorer is very powerful and makes the life of developers very easy. If you click on List SQL Statements it will list all the available SQL statements right away in Query Editor. You can see the popup window in following image. Here is the cool thing for geeks. You can even click on Query Plan and it will display the text based query plan as well. In case of a SELECT, the query plan will be much simpler, however, when we write complex queries it will be very interesting. We can use the query plan tab for performance tuning of the database. Here is another feature, when we click on List Tables in NuoDB Explorer.  It lists all the available tables in the query editor. This is very helpful when we are writing a long complex query. Here is a relatively complex example I have built using Inner Join syntax. Right below I have displayed the Query Plan. The query plan displays all the little details related to the query. Well, we just wrote multi-table query and executed it against the NuoDB database. You can use the NuoDB Admin section and do various analyses of the query and its performance. NuoDB is a distributed database built on a patented emergent architecture with full support for SQL and ACID guarantees.  It allows you to add Transaction Engine processes to a running system to improve the performance of your system.  You can also add a second Storage Engine to your running system for redundancy purposes.  Conversely, you can shut down processes when you don’t need the extra database resources. NuoDB also provides developers and administrators with a single intuitive interface for centrally monitoring deployments. If you have read my blog posts and have not tried out NuoDB, I strongly suggest that you download it today and catch up with the learnings with me. Trust me though the product is very powerful, it is extremely easy to learn and use. Reference: Pinal Dave (http://blog.sqlauthority.com)   Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: NuoDB

  Read the article

• Searching for the last logon of users in Active Directory

  - by Robert May

  I needed to clean out a bunch of old accounts at Veracity Solutions, and wanted to delete those that hadn’t used their account in more than a year. I found that AD has a property on objects called the lastLogonTimestamp.  However, this value isn’t exposed to you in any useful fashion.  Sure, you can pull up ADSI Edit and and eventually get to it there, but it’s painful. I spent some time searching, and discovered that there’s not much out there to help, so I thought a blog post showing exactly how to get at this information would be in order. Basically, what you end up doing is using System.DirectoryServices to search for accounts and then filtering those for users, doing some conversion and such to make it happen.  Basically, the end result of this is that you get a list of users with their logon information and you can then do with that what you will.  I turned my list into an observable collection and bound it into a XAML form. One important note, you need to add a reference to ActiveDs Type Library in the COM section of the world in references to get to LargeInteger. Here’s the class: namespace Veracity.Utilities { using System; using System.Collections.Generic; using System.DirectoryServices; using ActiveDs; using log4net; /// <summary> /// Finds users inside of the active directory system. /// </summary> public class UserFinder { /// <summary> /// Creates the default logger /// </summary> private static readonly ILog log = LogManager.GetLogger(typeof(UserFinder)); /// <summary> /// Finds last logon information /// </summary> /// <param name="domain">The domain to search.</param> /// <param name="userName">The username for the query.</param> /// <param name="password">The password for the query.</param> /// <returns>A list of users with their last logon information.</returns> public IList<UserLoginInformation> GetLastLogonInformation(string domain, string userName, string password) { IList<UserLoginInformation> result = new List<UserLoginInformation>(); DirectoryEntry entry = new DirectoryEntry(domain, userName, password, AuthenticationTypes.Secure); DirectorySearcher directorySearcher = new DirectorySearcher(entry); directorySearcher.PropertyNamesOnly = true; directorySearcher.PropertiesToLoad.Add("name"); directorySearcher.PropertiesToLoad.Add("lastLogonTimeStamp"); SearchResultCollection searchResults; try { searchResults = directorySearcher.FindAll(); } catch (System.Exception ex) { log.Error("Failed to do a find all.", ex); throw; } try { foreach (SearchResult searchResult in searchResults) { DirectoryEntry resultEntry = searchResult.GetDirectoryEntry(); if (resultEntry.SchemaClassName == "user") { UserLoginInformation logon = new UserLoginInformation(); logon.Name = resultEntry.Name; PropertyValueCollection timeStampObject = resultEntry.Properties["lastLogonTimeStamp"]; if (timeStampObject.Count > 0) { IADsLargeInteger logonTimeStamp = (IADsLargeInteger)timeStampObject[0]; long lastLogon = (long)((uint)logonTimeStamp.LowPart + (((long)logonTimeStamp.HighPart) << 32)); logon.LastLogonTime = DateTime.FromFileTime(lastLogon); } result.Add(logon); } } } catch (System.Exception ex) { log.Error("Failed to iterate search results.", ex); throw; } return result; } } } Some important things to note: Username and Password can be set to null and if your computer us part of the domain, this may still work. Domain should be set to something like LDAP://servername/CN=Users,CN=Domain,CN=com You’re actually getting a com object back, so that’s why the LongInteger conversions are happening.  The class for UserLoginInformation looks like this:   namespace Veracity.Utilities { using System; /// <summary> /// Represents user login information. /// </summary> public class UserLoginInformation { /// <summary> /// Gets or sets Name /// </summary> public string Name { get; set; } /// <summary> /// Gets or sets LastLogonTime /// </summary> public DateTime LastLogonTime { get; set; } /// <summary> /// Gets the age of the account. /// </summary> public TimeSpan AccountAge { get { TimeSpan result = TimeSpan.Zero; if (this.LastLogonTime != DateTime.MinValue) { result = DateTime.Now.Subtract(this.LastLogonTime); } return result; } } } } I hope this is useful and instructive. Technorati Tags: Active Directory

  Read the article

• FAT Volume and CE

  - by Kate Moss' Open Space

  Whenever we format a disk volume, it is a good idea to name the label so it will be easier to categorize. To label a volume, we can use LABEL command or UI depends on your preference. Windows CE does provide FAT driver and support various format (FAT12, FAT16,FAT32, ExFAT and TFAT - transaction-safe FAT) and many feature to let you scan and even defrag the volume but not labeling. At any time you format a volume in CE and then mount it on PC, the label is always empty! Of course, you can always label the volume on PC, even it is formatted in CE. So looks like CE does not care about the volume label at all, neither report the label to OS nor changing the label on FAT.So how can we set the volume label in CE? To Answer this question, we need to know how does FAT stores the volume label. Here are some on-line resources are handy for parsing FAT. http://en.wikipedia.org/wiki/File_Allocation_Table http://www.pjrc.com/tech/8051/ide/fat32.html http://www.microsoft.com/whdc/system/platform/firmware/fatgen.mspx You can refer to PUBLIC\COMMON\OAK\DRIVERS\FSD\FATUTIL\MAIN\bootsec.h and dosbpb.h or the above links for the fields we discuss here. The first sector of a FAT Volume (it is not necessary to be the first sector of a disk.) is a FAT boot sector and BPB (BIOS Parameter Block). And at offset 43, bgbsVolumeLabel (or bsVolumeLabel on FAT16) is for storing the volume lable, but note in the spec also indicates "FAT file system drivers should make sure that they update this field when the volume label file in the root directory has its name changed or created.". So we can't just simply update the bgbsVolumeLabel but also need to create a volume lable file in root directory. The volume lable file is not a real file but just a file entry in root directory with zero file lenth and a very special file attribute, ATTR_VOLUME_ID. (defined in public\common\oak\drivers\fsd\fatutil\MAIN\fatutilp.h) Locating and accessing bootsector is quite straight forward, as long as we know the starting sector of a FAT volume, that's it. But where is the root directory? The layout of a typical FAT is like this Boot sector (Volume ID in the figure) followed by Reserved Sectors (1 on FAT12/16 and 32 on FAT32), then FAT chain table(s) (can be 1 or 2), after that is the root directory (FAT12/16 and not shows in the figure) then begining of the File and Directories. In FAT12/16, the root directory is placed right after FAT so it is not hard to caculate the offset in the volume. But in FAT32, this rule is no longer true: the first cluster of the root directory is determined by BGBPB_RootDirStrtClus (or offset 44 in boot sector). Although this field is usually 0x00000002 (it is how CE initial the root directory after formating a volume. Note we should never assume it is always true) which means the first cluster contains data but not like the root directory is contiguous in FAT12/16, it is just like a regular file can be fragmented. So we need to access the root directory (of FAT32) hopping one cluster to another by traversing FAT table. Let's trace the code now. Although the source of FAT driver is not available in CE Shared Source program, but the formatter, Fatutil.dll, is available in public\common\oak\drivers\fsd\fatutil\MAIN\formatdisk.cpp. Be aware the public code only provides formatter for FAT12/16/32 for ExFAT it is still not available. FormatVolumeInternal is the main worker function. With the knowledge here, you should be able the trace the code easily. But I would like to discuss the following code pieces     dwReservedSectors = (fo.dwFatVersion == 32) ? 32 : 1;     dwRootEntries = (fo.dwFatVersion == 32) ? 0 : fo.dwRootEntries; Note the dwReservedSectors is 32 in FAT32 and 1 in FAT12/16. Root Entries is another different mentioned in previous paragraph, 0 for FAT32 (dynamic allocated) and fixed size (usually 512, defined in DEFAULT_ROOT_ENTRIES in public\common\sdk\inc\fatutil.h) And then here   memset(pBootSec->bsVolumeLabel, 0x20, sizeof(pBootSec->bsVolumeLabel)); It sets the Volume Label as empty string. Now let's carry on to the next section - write the root directory.     if (fo.dwFatVersion == 32) {         if (!(fo.dwFlags & FATUTIL_FORMAT_TFAT)) {             dwRootSectors = dwSectorsPerCluster;         }         else {             DIRENTRY    dirEntry;             DWORD       offset;             int               iVolumeNo;             memset(pbBlock, 0, pdi->di_bytes_per_sect);             memset(&dirEntry, 0, sizeof(DIRENTRY));                         dirEntry.de_attr = ATTR_VOLUME_ID;             // the first one is volume label             memcpy(dirEntry.de_name, "TFAT       ", sizeof (dirEntry.de_name));             memcpy(pbBlock, &dirEntry, sizeof(dirEntry));              ...             // Skip the next step of zeroing out clusters             dwCurrentSec += dwSectorsPerCluster;             dwRootSectors = 0;         }     }     // Each new root directory sector needs to be zeroed.     memset(pbBlock, 0, cbSizeBlk);     iRootSec=0;     while ( iRootSec < dwRootSectors) { Basically, the code zero out the each entry in root directory depends on dwRootSectors. In FAT12/16, the dwRootSectors is calculated as the sectors we need for the root entries (512 for most of the case) and in FAT32 it just zero out the one cluster. Please note that, if it is a TFAT volume, it initialize the root directory with special volume label entries for some special purpose. Despite to its unusual initialization process for TFAT, it does provide a example for how to create a volume entry. With some minor modification, we can assign the volume label in FAT formatter and also remember to sync the volume label with bsVolumeLabel or bgbsVolumeLabel in boot sector.

  Read the article

• RIDC Accelerator for Portal

  - by Stefan Krantz

  What is RIDC?Remote IntraDoc Client is a Java enabled API that leverages simple transportation protocols like Socket, HTTP and JAX/WS to execute content service operations in WebCenter Content Server. Each operation by design in the Content Server will execute stateless and return a complete result of the request. Each request object simply specifies the in a Map format (key and value pairs) what service to call and what parameters settings to apply. The result responded with will be built on the same Map format (key and value pairs). The possibilities with RIDC is endless since you can consume any available service (even custom made ones), RIDC can be executed from any Java SE application that has any WebCenter Content Services needs. WebCenter Portal and the example Accelerator RIDC adapter frameworkWebCenter Portal currently integrates and leverages WebCenter Content Services to enable available use cases in the portal today, like Content Presenter and Doc Lib. However the current use cases only covers few of the scenarios that the Content Server has to offer, in addition to the existing use cases it is not rare that the customer requirements requires additional steps and functionality that is provided by WebCenter Content but not part of the use cases from the WebCenter Portal.The good news to this is RIDC, the second good news is that WebCenter Portal already leverages the RIDC and has a connection management framework in place. The million dollar question here is how can I leverage this infrastructure for my custom use cases. Oracle A-Team has during its interactions produced a accelerator adapter framework that will reuse and leverage the existing connections provisioned in the webcenter portal application (works for WebCenter Spaces as well), as well as a very comprehensive design patter to minimize the work involved when exposing functionality. Let me introduce the RIDCCommon framework for accelerating WebCenter Content consumption from WebCenter Portal including Spaces. How do I get started?Through a few easy steps you will be on your way, Extract the zip file RIDCCommon.zip to the WebCenter Portal Application file structure (PortalApp) Open you Portal Application in JDeveloper (PS4/PS5) select to open the project in your application - this will add the project as a member of the application Update the Portal project dependencies to include the new RIDCCommon project Make sure that you WebCenter Content Server connection is marked as primary (a checkbox at the top of the connection properties form) You should by this stage have a similar structure in your JDeveloper Application Project Portal Project PortalWebAssets Project RIDCCommon Since the API is coming with some example operations that has already been exposed as DataControl actions, if you open Data Controls accordion you should see following: How do I implement my own operation? Create a new Java Class in for example com.oracle.ateam.portal.ridc.operation call it (GetDocInfoOperation) Extend the abstract class com.oracle.ateam.portal.ridc.operation.RIDCAbstractOperation and implement the interface com.oracle.ateam.portal.ridc.operation.IRIDCOperation The only method you actually are required to implement is execute(RIDCManager, IdcClient, IdcContext) The best practice to set object references for the operation is through the Constructor, example below public GetDocInfoOperation(String dDocName)By leveraging the constructor you can easily force the implementing class to pass right information, you can also overload the Constructor with more or less parameters as required Implement the execute method, the work you supposed to execute here is creating a new request binder and retrieve a response binder with the information in the request binder.In this case the dDocName for which we want the DocInfo Secondly you have to process the response binder by extracting the information you need from the request and restore this information in a simple POJO Java BeanIn the example below we do this in private void processResult(DataBinder responseData) - the new SearchDataObject is a Member of the GetDocInfoOperation so we can return this from a access method. Since the RIDCCommon API leverage template pattern for the operations you are now required to add a method that will enable access to the result after the execution of the operationIn the example below we added the method public SearchDataObject getDataObject() - this method returns the pre processed SearchDataObject from the execute method  This is it, as you can see on the code below you do not need more than 32 lines of very simple code 1: public class GetDocInfoOperation extends RIDCAbstractOperation implements IRIDCOperation { 2: private static final String DOC_INFO_BY_NAME = "DOC_INFO_BY_NAME"; 3: private String dDocName = null; 4: private SearchDataObject sdo = null; 5: 6: public GetDocInfoOperation(String dDocName) { 7: super(); 8: this.dDocName = dDocName; 9: } 10:   11: public boolean execute(RIDCManager manager, IdcClient client, 12: IdcContext userContext) throws Exception { 13: DataBinder dataBinder = createNewRequestBinder(DOC_INFO_BY_NAME); 14: dataBinder.putLocal(DocumentAttributeDef.NAME.getName(), dDocName); 15: 16: DataBinder responseData = getResponseBinder(dataBinder); 17: processResult(responseData); 18: return true; 19: } 20: 21: private void processResult(DataBinder responseData) { 22: DataResultSet rs = responseData.getResultSet("DOC_INFO"); 23: for(DataObject dobj : rs.getRows()) { 24: this.sdo = new SearchDataObject(dobj); 25: } 26: super.setMessage(responseData.getLocal(ATTR_MESSAGE)); 27: } 28: 29: public SearchDataObject getDataObject() { 30: return this.sdo; 31: } 32: } How do I execute my operation? In the previous section we described how to create a operation, so by now you should be ready to execute the operation Step one either add a method to the class  com.oracle.ateam.portal.datacontrol.ContentServicesDC or a class of your own choiceRemember the RIDCManager is a very light object and can be created where needed Create a method signature look like this public SearchDataObject getDocInfo(String dDocName) throws Exception In the method body - create a new instance of GetDocInfoOperation and meet the constructor requirements by passing the dDocNameGetDocInfoOperation docInfo = new GetDocInfoOperation(dDocName) Execute the operation via the RIDCManager instance rMgr.executeOperation(docInfo) Return the result by accessing it from the executed operationreturn docInfo.getDataObject() 1: private RIDCManager rMgr = null; 2: private String lastOperationMessage = null; 3:   4: public ContentServicesDC() { 5: super(); 6: this.rMgr = new RIDCManager(); 7: } 8: .... 9: public SearchDataObject getDocInfo(String dDocName) throws Exception { 10: GetDocInfoOperation docInfo = new GetDocInfoOperation(dDocName); 11: boolean boolVal = rMgr.executeOperation(docInfo); 12: lastOperationMessage = docInfo.getMessage(); 13: return docInfo.getDataObject(); 14: }   Get the binaries! The enclosed code in a example that can be used as a reference on how to consume and leverage similar use cases, user has to guarantee appropriate quality and support.  Download link: https://blogs.oracle.com/ATEAM_WEBCENTER/resource/stefan.krantz/RIDCCommon.zip RIDC API Referencehttp://docs.oracle.com/cd/E23943_01/apirefs.1111/e17274/toc.htm

  Read the article

• Initial Review - Mastering Unreal Technology I: Introduction to Level Design with Unreal Engine 3

  - by Matt Christian

  Recently I purchased 3 large volumes on using the Unreal 3 Engine to create levels and custom games.  This past weekend I cracked the spine of the first and started reading.  Here are my early impressions (I'm ~250 pages into it, with appendices it's about 900). Pros Interestingly, the book starts with an overview of the Unreal engines leading up to Unreal 3 (including Gears of War) and follows with some discussion on planning a mod and what goes into the game development process.  This is nice for an intro to the book and is much preferred rather than a simple chapter detailing what is on the included CD, how to install and setup UnrealEd, etc...  While the chapter on Unreal history and planning can be considered 'fluff', it's much less 'fluffy' than most books provide. I need to mention one thing here that is pretty crucial in the way I'm going to continue reviewing this book.  Most technical books like this are used as a shelf reference; as a thick volume you use for looking up techniques every now and again.  Even so, I prefer reading from cover to cover, including chapters I may already be knowledgable on (I'm sure this is typical for most people).  If there was a chapter on installing UnrealEd (the previously mentioned 'fluff'), I would probably force myself to read it, even though I've installed the game and engine multiple times on different systems. Chapter 3 is where we really get to the introduction piece of UnrealEd, creating your first basic level.  This large chapter details creating two small rooms, adding static meshes, adding lighting, creating and adding particle emitters, creating a door that animates with Unreal Matinee and Kismet, static meshes with physics, and other little additions to make your level look less beginner.  This really is a chapter that overviews the entire rest of the book, as each chapter following details the creation and intermediate usages of Static Meshes, Materials, Lighting, etc... One other very nice part to this book is the way the tutorials are setup.  Each tutorial builds off the previous and all are step-by-step.  If you haven't completed one yet, you can find all the starting files on the CD that comes with the book. Cons While the description of the overview chapter (Chapter 3) is fresh in your mind, let me start the cons by saying this chapter is setup extremely confusing for the noob.  At one point, you end up creating a door mesh and setting it up as a InteropMesh so that it is ready to be animated, only to switch to particles and spend a good portion of time working on a different piece of the level.  Yes, this is actually how I develop my levels (jumping back and forth), though it's very odd for a book to jump out of sequence. The next item might be a positive or a negative depending on your skill level with UnrealEd.  Most of the introduction to the editor layout is found in one of the Appendices instead of before Chapter 3.  For new readers, this might lead to confusion as Appendix A would typically be read between Chapter 2 and 3.  However, this is a positive for those with some experience in UnrealEd as they don't have to force themselves through a 'learn every editor button' chapter.  I'm listing this in the Cons section as the book is 'Introduction to...' and is probably going to be directed toward a lot of very beginner developers. Finally, there's a lack of general description to a lot of the underlying engine and what each piece in UnrealEd is or does.  Sometimes you'll be performing Tutorial after Tutorial with barely a paragraph in between describing ANY of what you've just done.  Tutorial 1.1 Step 6 says to press Button X, so you do.  But why?  This is in part a problem with the structure of the tutorials rather than the content of the book.  Since the tutorials are so focused on a step-by-step (or procedural) description of a process, you learn the process and not why you're doing that.  For example, you might learn how to size a material to a surface, but will only learn what buttons to press and not what each one does. This becomes extremely apparent in the chapter on Static Meshes as most of the chapter is spent in 3D Studio Max.  Since there are books on 3DSM and modelling, the book really only tells you the steps and says to go grab a book on modelling if you're really interested in 3DSM.  Again, I've learned the process to develop my own meshes in 3DSM, but I don't know the why behind the steps. Conclusion So far the book is very good though I would have a hard time recommending it to a complete beginner.  I would suggest anyone looking at this book (obviously including the other 2, more advanced volumes) to pick up a copy of UDK or Unreal 3 (available online or via download services such as Steam) and watch some online tutorials and play with it first.  You'll find plenty of online videos available that were created by the authors and may suit as a better introduction to the editor.

  Read the article

< Previous Page | 207 208 209 210 211 212 213 214 215 216 217 218  | Next Page >