Search Results

Search found 28864 results on 1155 pages for 'ob start'.

Page 212/1155 | < Previous Page | 208 209 210 211 212 213 214 215 216 217 218 219  | Next Page >

• Setting affinity on windows server 2003

  - by Samuel

  I have a program that by default only runs on one CPU. I have tried using the start /affinity x notepad.exe batch command but i can't get it to run my program. it changes the title of the command line window but doesn't execute the program. this start command does work for notepad so it might just be a problem with the software. I have set the affinity manually via task manager so i know it works. I am not the programmer of this software so changing that is not an option.

  Read the article

• RODC password replication and A/D sites and subnets

  - by Gregory Thomson

  I work at a school district with about 30 school sites. Windows 2008 A/D setup - all central at the district office. In A/D, all is under one site, and no subnets defined. One A/D forest and only one domain under that. We're now looking to start putting RODCs at the schools to put the authentication and DNS out there closer to them. I haven't worked with A/D sites and subnets, and only a little with RODC password replication. But just got an invite to a meeting to talk about this tomorrow... If we start breaking down the A/D pieces into sites/subnets, can we also use that as a way to help apply an RODC password replication policy in a way that matches so that only each school sites' users passwords are replicated/cached on their RODC?

  Read the article

• Proper upstart script for hamachi?

  - by ALQ

  I've been looking for a script to supervise hamachi and mostly got it to work except for the part that daemonizes hamachid. The following script works but is not perfect. I'm not familiar with upstart internals to debug this further. description "Hamachi VPN" author "Alexis Le-Quoc <[email protected]>" start on (net-device-up and local-filesystems and runlevel [2345]) stop on runlevel [016] respawn oom never env DAEMON=/opt/logmein-hamachi/bin/hamachid pre-start script [ -x "$DAEMON" ] end script # should really be: # expect daemon # exec $DAEMON exec $DAEMON debug > /dev/null

  Read the article

• Build and migrated to software raid (mdadm) on GPT disk, now can't assemble array

  - by John H

  mdadm, gpt issues, unrecognized partitions. Simplified question: How do I get mdadm to recognize GPT partitions? I have been attempting to convert/copy my Ubuntu 11.10 OS from a single drive to software raid 1. I have done similar in the past, but in this case, I was adding in a drive that has been configured for GPT and I tried to work with that without fully looking into the implications. Currently, I have a non-booting mdadm RAID 1 array of /dev/md127 (the OS assigned that and it keeps picking up). I am booting off of live USB keys, currently System Rescue CD from sysresccd. While gdisk and parted can see all the partitions, most of the OS utilities do not, including mdadm. My main goal is just to make the raid array accessible so I can get pull the data and start fresh (without using GPT). /dev/md127 /dev/sda /dev/sda1 <- GPT type partition /dev/sda1 <- exists within the GPT part, member of md127 /dev/sda2 <- exists within the GPT part, empty /dev/sdb /dev/sdb1 <- GPT type partition /dev/sdb1 <- exists within the GPT part, member of md127 History: POINT A: The original OS was install on sda (actually /dev/sda6). I used a the Ubuntu live usb to add sdb. I got warning from fdisk about GPT so I used gdisk to create a raid partition (sdb1) and mdadm to create a raid1 mirror with a missing drive. I had many issues getting this working (including being unable to get grub to install) but I eventually got it to boot using grub on sda and /dev/md127 off of sdb. So at point A, I had copied my OS from sda6 to md127 on sdb. I then booted into a rescue mode and attempted to get a bootloader onto sdb, which failed. I then discovered my mistake: I had installed the raid onto sdb instead of sdb1, essentially overwriting the sdb1 partition. POINT B: I now had two copies of my data- one on md127/sdb, and one on sda. I destroyed data on sda and created a new GPT table on sda. I then created sda1 for the raid array, and sda2 for a scratch partition. I added sda1 into the raid array and let it rebuild. md127 now covered /dev/sdb and /dev/sda1 as fully active and synced. POINT C: I rebooted onto linux rescue again and was still able to access the raid array. I then removed /dev/sdb from the array and created /dev/sdb1 for the raid. I added sdb1 to the array and let it sync. I was able to mount and access /dev/md127 without issues. Once it completed, both /dev/sda1 and /dev/sdb1 were GPT partitions and actively syncing. POINT D (current): I rebooted again to test if the array would boot and grub failed to load. I booted off of my live thumb drive and found that I can no longer assemble the raid array. mdadm doesn't see the required partitions. -- root@freshdesk /root % uname -a Linux freshdesk 3.0.24-std251-amd64 #2 SMP Sat Mar 17 12:08:55 UTC 2012 x86_64 AMD Athlon(tm) II X4 645 Processor AuthenticAMD GNU/Linux === /proc/partitions and parted look good: root@freshdesk /root % cat /proc/partitions major minor #blocks name 7 0 301788 loop0 8 0 976762584 sda 8 1 732579840 sda1 8 2 244181703 sda2 8 16 732574584 sdb 8 17 732573543 sdb1 8 32 7876607 sdc 8 33 7873349 sdc1 (parted) print all Model: ATA ST31000528AS (scsi) Disk /dev/sda: 1000GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 750GB 750GB ext4 2 750GB 1000GB 250GB Linux/Windows data Model: ATA SAMSUNG HD753LJ (scsi) Disk /dev/sdb: 750GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 750GB 750GB ext4 Linux RAID raid Model: SanDisk SanDisk Cruzer (scsi) Disk /dev/sdc: 8066MB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 31.7kB 8062MB 8062MB primary fat32 boot, lba === # no sda2, and I double the sdb1 is the one shown in parted root@freshdesk /root % blkid /dev/loop0: TYPE="squashfs" /dev/sda1: UUID="75dd6c2d-f0a8-4302-9da4-792cc7d72355" TYPE="ext4" /dev/sdc1: LABEL="PENDRIVE" UUID="1102-3720" TYPE="vfat" /dev/sdb1: UUID="2dd89f15-65bb-ff88-e368-bf24bd0fce41" TYPE="linux_raid_member" root@freshdesk /root % mdadm -E /dev/sda1 mdadm: No md superblock detected on /dev/sda1. # this is probably a result of me attempting to force the array up, putting superblocks on the GPT partition root@freshdesk /root % mdadm -E /dev/sdb1 /dev/sdb1: Magic : a92b4efc Version : 0.90.00 UUID : 2dd89f15:65bbff88:e368bf24:bd0fce41 Creation Time : Fri Mar 30 19:25:30 2012 Raid Level : raid1 Used Dev Size : 732568320 (698.63 GiB 750.15 GB) Array Size : 732568320 (698.63 GiB 750.15 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 127 Update Time : Sat Mar 31 12:39:38 2012 State : clean Active Devices : 1 Working Devices : 2 Failed Devices : 1 Spare Devices : 1 Checksum : a7d038b3 - correct Events : 20195 Number Major Minor RaidDevice State this 2 8 17 2 spare /dev/sdb1 0 0 8 1 0 active sync /dev/sda1 1 1 0 0 1 faulty removed 2 2 8 17 2 spare /dev/sdb1 === root@freshdesk /root % mdadm -A /dev/md127 /dev/sda1 /dev/sdb1 mdadm: no recogniseable superblock on /dev/sda1 mdadm: /dev/sda1 has no superblock - assembly aborted root@freshdesk /root % mdadm -A /dev/md127 /dev/sdb1 mdadm: cannot open device /dev/sdb1: Device or resource busy mdadm: /dev/sdb1 has no superblock - assembly aborted

  Read the article

• Display current layout WITHOUT using Windows's language bar

  - by Shiki

  Basically I love quick launch and pinning is not for me, I can't just pin 50 apps, nor pin them to start menu / use the win + type method. Anyway, Quick Launch works perfectly under Win7 IF you don't use the language bar. If you use it, sometimes (or always) it may fail to start/appear, you have to readd it. So my question is: Is there a tray app, a RainMeter way to show this? (First would be better). Thanks. (Best would be if I could switch layout globally but that train is gone. (Look at the changing global layout. Thank you Microsoft. (Irony included)).

  Read the article

• Has anyone managed to install Office Webapps on SharePoint 2010, on Windows 7 ?

  - by Nick Haslam

  I've installed SharePoint 2010 as a development environment on my Windows 7 x64 environment (notes here) and would like to install Office Web Apps onto it also. However, when trying to install (following this link), I get an error saying that Web roles aren't installed. The error message in the log file is: Start C:\Windows\system32\ServerManagerCmd.exe -whatif -inputpath C:\Users\nickh\AppData\Local\Temp\PRE1.tmp.XML Error: Failed to start process for file: C:\Windows\system32\ServerManagerCmd.exe arguments: -whatif -inputpath C:\Users\nickh\AppData\Local\Temp\PRE1.tmp.XML ErrorCode: 2(0x2). Which is effectively saying that ServerManagerCmd is not found. It isn't on my machine as it is deprecated and replaced by Powershell functions, but is on Server 2008 R2. I've tried copying that over and it just fails to run. Is there a way to get Office WebApps installed on Win7 ? Is there a way to get a working version of ServerManagerCmd.exe on a Windows 7 x64 environment ? Many thanks

  Read the article

• Cached Network Share Credentials?

  - by Brian Wolfe

  Hi, I have an issue in Windows 7 where I get the following error message when attempting to access an admin network share on a machine in another domain: "Multiple connections to a server or shared resource by the same user, using more than one user name, are not allowed. Disconnect all previous connections to the server or shared resource and try again." Troubleshooting I've Done Start Run cmd net use * /DELETE Start Manage Windows Credentials Deleted all credentials I still receive the same error until I reboot my machine. After I reboot, it works fine. However, I am able to log into the admin share if I hit it by it's IP address. QUESTION My question is, is there somewhere else I should be looking for cached user credentials? Thanks, Brian

  Read the article

• Is there a difference between starting a WebLogic Admin Server through the command-line or through t

  - by lindelof

  I have WebLogic 11g installed on my machine under /srv/wls, and I start Node manager on it with /srv/wls/wlserver_10.3/server/bin/startNodeManager.sh. I create my domain with config.sh, and then I want to start the Admin Server of that domain with Node Manager. So I open a WLST session and do the following: > nmConnect(...) > nmStart('AdminServer') But when I then visit localhost:7001/console, and login, the screen on the browser remains blank and the server logs tell me the server has run out of PermGen space. I don't encounter this problem when starting the Admin Server through the shell script under $DOMAIN/startWebLogic.sh. Then it works fine. Any idea what I am doing wrong? I couldn't find anything in Google nor on the Oracle forums...

  Read the article

• Why does my computer show a black screen when booting into Windows Vista?

  - by dassouki

  Today, I removed some old software from dad's vista, and installed SP1. After which the computer restarted and it went into a "black" screen. I left it running for a few hours, and the laptop was really hot. I tried to get into safemode, start from last known good start up, but nothing seemed to work. i know it stops after loading \windows\system32\drivers\cplir.sys what's going on and how can I fix his computer? Update I'm still unable to fix my install. Repair and restoring the OS fail. The laptop has the vista partition built into it. I can't boot through a USB, and my other computer doesn't have a cd/dvd writer Update 2 I tried chkdisk /f and although it fixed some errors, I still get the black screen of death.

  Read the article

• Cannot install grub to RAID1 (md0)

  - by Andrew Answer

  I have a RAID1 array on my Ubuntu 12.04 LTS and my /sda HDD has been replaced several days ago. I use this commands to replace: # go to superuser sudo bash # see RAID state mdadm -Q -D /dev/md0 # State should be "clean, degraded" # remove broken disk from RAID mdadm /dev/md0 --fail /dev/sda1 mdadm /dev/md0 --remove /dev/sda1 # see partitions fdisk -l # shutdown computer shutdown now # physically replace old disk by new # start system again # see partitions fdisk -l # copy partitions from sdb to sda sfdisk -d /dev/sdb | sfdisk /dev/sda # recreate id for sda sfdisk --change-id /dev/sda 1 fd # add sda1 to RAID mdadm /dev/md0 --add /dev/sda1 # see RAID state mdadm -Q -D /dev/md0 # State should be "clean, degraded, recovering" # to see status you can use cat /proc/mdstat This is the my mdadm output after sync: /dev/md0: Version : 0.90 Creation Time : Wed Feb 17 16:18:25 2010 Raid Level : raid1 Array Size : 470455360 (448.66 GiB 481.75 GB) Used Dev Size : 470455360 (448.66 GiB 481.75 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Thu Nov 1 15:19:31 2012 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 92e6ff4e:ed3ab4bf:fee5eb6c:d9b9cb11 Events : 0.11049560 Number Major Minor RaidDevice State 0 8 1 0 active sync /dev/sda1 1 8 17 1 active sync /dev/sdb1 After bebuilding completion "fdisk -l" says what I have not valid partition table /dev/md0. This is my fdisk -l output: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00057d19 Device Boot Start End Blocks Id System /dev/sda1 * 63 940910984 470455461 fd Linux raid autodetect /dev/sda2 940910985 976768064 17928540 5 Extended /dev/sda5 940911048 976768064 17928508+ 82 Linux swap / Solaris Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000667ca Device Boot Start End Blocks Id System /dev/sdb1 * 63 940910984 470455461 fd Linux raid autodetect /dev/sdb2 940910985 976768064 17928540 5 Extended /dev/sdb5 940911048 976768064 17928508+ 82 Linux swap / Solaris Disk /dev/md0: 481.7 GB, 481746288640 bytes 2 heads, 4 sectors/track, 117613840 cylinders, total 940910720 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md0 doesn't contain a valid partition table This is my grub install output: root@answe:~# grub-install /dev/sda /usr/sbin/grub-setup: warn: Attempting to install GRUB to a disk with multiple partition labels or both partition label and filesystem. This is not supported yet.. /usr/sbin/grub-setup: error: embedding is not possible, but this is required for cross-disk install. root@answe:~# grub-install /dev/sdb Installation finished. No error reported. So 1) "update-grub" find only /sda and /sdb Linux, not /md0 2) "dpkg-reconfigure grub-pc" says "GRUB failed to install the following devices /dev/md0" I cannot load my system except from /sdb1 and /sda1, but in DEGRADED mode... Anybody can resolve this issue? I have big headache with this.

  Read the article

• set tap0 using virt-manager for bridged wireless

  - by DaveO

  After 3 days I finally have kvm guests working on the network via wireless (link below - thanks!): My network is 192.168.1.0/24 on the host: sudo sh -c "echo 1 > /proc/sys/net/ipv4/ip_forward" sudo tunctl -t tap0 sudo ip link set tap0 up sudo ip addr add 192.168.1.25/24 dev tap0 sudo route add -host 192.168.1.30 dev tap0 sudo parprouted wlan0 tap0 on the guest: auto eth0 iface eth0 inet static address 192.168.1.30 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.25 and start the guest: sudo kvm /path/to/guest.img -net nic,macaddr=DE:AD:BE:EF:90:26 -net tap,ifname=tap0,script=no This works great and I can ping the local network and the internet back and forth between the guest. But how do I add these settings to the guest's xml config so I can start the guest via virt-manager with the same nic settings? ref: http://www.linuxquestions.org/questions/debian-26/kvm-wireless-bridge-network-691953/

  Read the article

• getting Ubuntu-quality fonts / configuration under Cygwin/X

  - by user5402

  I have Cygwin/X installed on a Win7 box. I also have an Ubuntu VM running on the Win7 host. If I do the following: Start Xming on the Win7 box Start mate-terminal under Cygwin/X then mate-terminal starts up with very crappy-looking fonts and a blinking cursor. (I'm using "Monospace 10" in mate-terminal.) If I then do: Use putty to ssh into the Ubuntu VM (fowarding the X connection) Run gnome-settings-daemon on the Ubuntu VM then the fonts in mate-terminal suddenly become much better looking and the cursor stops blinking (probably because I've configured it that way in Ubuntu.) Question: How can I get the better-looking fonts and the ability to set cursor-blinks option for mate-terminal under Cygwin/X without having to run the Ubuntu VM? FWIW, I have Xming-fonts-7-5-0-4 installed. Update: Starting Xming with '-dpi 101' as suggested here helps, but the fonts are still not anti-aliased.

  Read the article

• kill SIGABRT does not generate core file from daemon started from crontab.

  - by Guma

  I am running CentOS 5.5 and working on server application that sometimes I need to force core dump so I can see what is going on. If I start my server from shell and send kill SIGABRT, a core file is created. If I start same program from crontab and then I send the same signal to it the server is "killed" but no core file is generated. Does any one know why is that and what need to be added to my code or changed in system settings to allow core file generation? Just a side note I have ulimit set to unlimited in /etc/profile I have set kernel.core_uses_pid = 1 kernel.core_pattern=/var/cores/%h-%e-%p.core in /etc/sysctl.conf Also my server app was added to crontab under same login id as I am running it from shell. Any help greatly appreciated

  Read the article

• Exchange 2010 Cmdlets for Sent Items in a Distribution group

  - by Jimmy Jones

  Here is the scenario that I am in and am stuck on how to get this the correct way. What I'm looking for is a syntax that will provide me with statistics on what users have emailed "Sent" for the day. I would like to know get information on what all users of a specific distribution group has emailed for the day. I have tried the following to no avail. Get-Mailbox | Get-MailboxFolderStatistics -FolderScope SentItems | Where {$_.ItemsInFolder -gt 0} | -Start "06/14/2012 9:00AM" -End "06/14/2012 5:00PM" | Sort-Object -Property ItemsInFolder -Descending | select-object Identity,ItemsInFolder | export-csv c:\test.txt Get-MessageTrackingLog -Start "06/14/2012 9:00AM" -End "06/14/2012 5:00PM" -Sender "" | measure-object - This one will only work on specified users, but I need to check the whole group. If anyone could help me out. Thank you!!!

  Read the article

• MacBook Refuses to Boot

  - by pas09

  I have a MacBook that has unfortunately died on me. I randomly got a pop up message that said I needed to restart my computer, and once I did, I was greeted with the blinking folder question mark start up screen. I've tried everything, including running Disk Utility repair and reformatting the hard drive and reinstalling OS X. All of my data is backed up and safe, I just need my computer to start again. Before I go off and buy a new hard drive, I wanted to see if there is anything I might have forgotten.

  Read the article

• How can I launch RemoteApp on Windows Server from server itself at startup

  - by Rusted

  I have Windows Server 2008 R2 with RDS and custom desktop (GUI) application installed on the server. The app is started as RemoteApp on server by user from his desktop computer (or, sometimes, he can work from notebook over VPN). Some details about environment: the server automatically shuts down every evening and automatically power-on every morning (this is a requirement) desktop application do some precalculations/precaching on startup and it can take lot of time mentioned application have some memory leaks, so I can't use hibernate instead of shutdown When user launching this app from his computer, he can't start work with it until this app finishes pre-initialization. Is there any way to start RemoteApp session at the server startup (without actual user logon), so that the user could connect to this session from his computer later? I don't want to involve the user's computer to make it work. I have tried to do it by Windows startup script, but have no luck - starting RDP session requires actual user session.

  Read the article

• MBP becomes very hot after using Xcode

  - by Globalhawk

  Hardware: MBP early 2011 version OS: Mountain lion App: Xcode 4.5.2 Problem: Every time when I start Xcode, 2 or 3 processes called "git" start running. But when I quit Xcode the "git" process won't quit and are still using a lot of CPU. Then the computer becomes quite hot and the battery gets drained very quickly. If I manually kill these processes the problem is gone. I tried to reinstall Xcode several times but the problem comes back every time. It drives me crazy. Any help will be appreciated!

  Read the article

• How to solve my black screen at boot?

  - by Juanillo

  I've got a friend with a weird problem. When he starts his computer the screen is completely black until the computer is completely started. So the screen is black until it suddenly shows the Windows desktop. He said that this is happening since a technical service repaired his computer, but that repair is not now in warranty. Recently the computer stopped working, but as the screen is black he cannot access to BIOS or start in safe mode (by pressing F8). When he inserts the Windows Vista DVD the system doesn't boot from DVD (it mustn't be configured in this way in the BIOS). Maybe there´s a problem with the hardware (maybe the graphic card)? Can anyone explain a reason why the screen is black during start-up? Any idea of what to do with the computer to restore it?

  Read the article

• mix audio with h264 mp4 video with ffmpeg

  - by user2362912

  I have 2 files : Input #0, wav, from '105426_1.wav': Duration: 00:00:09.98, bitrate: 1312 kb/s Stream #0:0: Audio: pcm_s16le ([1][0][0][0] / 0x0001), 41000 Hz, stereo, s16, 1312 kb/s and: Duration: 00:00:41.29, start: 0.000000, bitrate: 1313 kb/s Stream #0:0(und): Video: h264 (Constrained Baseline) (avc1 / 0x31637661), yuv420p, 640x360 [SAR 1:1 DAR 16:9], 1211 kb/s, 24.42 fps, 25 tbr, 90k tbn, 48 tbc Metadata: handler_name : VideoHandler Stream #0:1(eng): Audio: aac (mp4a / 0x6134706D), 44100 Hz, stereo, fltp, 99 kb/s Metadata: handler_name : SoundHandler I want to insert first audio file into video in special place (for example in 10 secunde of video) and mix it with audio stream of video file. I try to /usr/local/bin/ffmpeg -i 105426_1.wav -i 105426.mp4 -map 0:0 -map 1:1 -map 1:0 video_finale.mp4 but result is : Duration: 00:00:41.31, start: 0.046440, bitrate: 755 kb/s Stream #0:0(und): Audio: aac (mp4a / 0x6134706D), 44100 Hz, stereo, fltp, 128 kb/s Metadata: handler_name : SoundHandler Stream #0:1(eng): Audio: aac (mp4a / 0x6134706D), 44100 Hz, stereo, fltp, 128 kb/s Metadata: handler_name : SoundHandler Stream #0:2(und): Video: h264 (High) (avc1 / 0x31637661), yuv420p, 640x360 [SAR 1:1 DAR 16:9], 588 kb/s, 25 fps, 25 tbr, 12800 tbn, 50 tbc Metadata: handler_name : VideoHandler I need only one audio stream and first stream play not from beginig but from 10 sec

  Read the article

• Open a screen session inside a certain user on boot Ubuntu Server Linux

  - by Pez Cuckow

  I currently have a private server which I test my web apps on which runs Ubuntu Server 10.04 I also host a few game servers (rather than having wasted CPU time :-D) for some of my friends. These game servers I run in the game user account and each one has it's own screen session (so friends can ssh in and reboot the game server etc...). For example screen -R l4d2 runs ./start in the L4D2 folder. However if I reboot the server (which I have to do occasionally) all these sessions close and I have to manually create all the screen sessions and run the required games within them. Is there a way to set these screen sessions as Daemons or services or just boot on server start so they restart themselves on server reboot? I hope I have made my question easy to understand but feel free to ask questions! Many thanks,

  Read the article

• windows 2003 - why can't serial port be accessed remotely?

  - by Danny Staple

  we have recently installed the updates on some of our servers, which have a bit of hardware attached via USB that presents itself as a serial (COM) port. The strange behaviour is that if I start a cmd shell on the server via VNC, I can open the serial port. If I run a service and start it from there (telnet, jenkins) then I receive a "not found" error for it. IE: C:\Documents and Settings\some_user>echo 1 >COM4: C:\Documents and Settings\some_user> on the local cmd will work, and on the remote telnet will give: C:\Documents and Settings\some_user>echo 1 >COM4: The system cannot find the file specified. C:\Documents and Settings\some_user> I cannot see any security settings on the Device manager settings panel for this device.

  Read the article

• How to install GNOME desktop from DVD on CentOS 6 using the command line?

  - by alwbtc

  I have installed CentOS 6 in Virtualbox. Although I have chosen to install General Purpose GNOME Desktop, the GNOME desktop does not start. All I get is a black and white text prompt. I would like to know how I can install GNOME Desktop from the CentOS DVD. How do I mount the DVD image? How do I install GNOME desktop from command line? If I already have the GNOME Desktop installed, why doesn't it start? How can I check from command line that I have GNOME installled? This virtual machine does not have internet connection, that's why I want to install the GNOME Desktop from DVD.

  Read the article

• set internet explorer as default browser from command line

  - by eric cartman

  Is it possible to set internet explorer as default browser from command line? I have a web application that runs only under ie but if it happens that firefox is the default one, it doesn't work. Users are in a domain environment and even though I try to launch our application from a batch in this way start "C:\Program Files\Internet Explorer\iexplore.exe" http://server_ip/home_page my app doesn't start unless I change the browser manually. Moreover I'd like to know if it's possible to set some policy on a domain to prevent that users with limited privileges could change the default browser. Thanks in advance.

  Read the article

• HDFS datanode startup fails when disks are full

  - by mbac

  Our HDFS cluster is only 90% full but some datanodes have some disks that are 100% full. That means when we mass reboot the entire cluster some datanodes completely fail to start with a message like this: 2013-10-26 03:58:27,295 ERROR org.apache.hadoop.hdfs.server.datanode.DataNode: java.io.IOException: Mkdirs failed to create /mnt/local/sda1/hadoop/dfsdata/blocksBeingWritten Only three have to fail this way before we start experiencing real data loss. Currently we workaround it by decreasing the amount of space reserved for the root user but we'll eventually run out. We also run the re-balancer pretty much constantly, but some disks stay stuck at 100% anyway. Changing the dfs.datanode.failed.volumes.tolerated setting is not the solution as the volume has not failed. Any ideas?

  Read the article

• Troubleshooting a crash with Windows 7

  - by AngryHacker

  I have a folder with several thousand videos (All .MPG extensions). When I open the folder with these videos, it shows up fine, but as I start scrolling down, it crashes the Windows Explorer. In the Event Viewer, I see this: Faulting application name: Explorer.EXE, version: 6.1.7600.16450, time stamp: 0x4aebab8d Faulting module name: ntdll.dll, version: 6.1.7600.16559, time stamp: 0x4ba9b802 Exception code: 0xc0000374 Fault offset: 0x00000000000c6df2 Faulting process id: 0x954 Faulting application start time: 0x01cbb1b71edf3b51 Faulting application path: C:\Windows\Explorer.EXE Faulting module path: C:\Windows\SYSTEM32\ntdll.dll Report Id: ee987372-1dc4-11e0-8e06-406186ea9135 I suspect that one of the videos has bad metadata. I removed the Length column and it was still crashing. I then removed the Date column and the problem disappeared. How do I go about troubleshooting this problem or at least identifying the file that's causing the issue.

  Read the article

< Previous Page | 208 209 210 211 212 213 214 215 216 217 218 219  | Next Page >