Search Results

Search found 5868 results on 235 pages for 'reverse proxy'.

Page 212/235 | < Previous Page | 208 209 210 211 212 213 214 215 216 217 218 219  | Next Page >

• Strange Problem with Webservice and IIS

  - by Rene

  Hello there, I have a Problem which confuses me a little bit, resp. where I don't have any Idea about what it could be. The System I'm using is Windows Vista, IIS 7.0, VS2008, Windows Software Factory, Entity Framework, WCF. The Binding for all Webservices is wshttpbinding. I'm using a Webservice hosted in IIS. This Webservice uses/calls another Webservice (also installed in the IIS). If I use a client calling the first Webservice (which calls the second Webservice) it works fine for about 4-10 Times. And then (it is repeatable to get this Problem, but sometimes it happens after 4, sometimes after 10 Time, but it always will happen), the Service and the IIS gets stuck. Stuck means, that this Webservice isn't callable anymore and generates an timeout after 1 minute. Even increasing Timeout doesn't change anything. If i try to restart the IIS I get an timeout error. So the IIS is also "stuck" (it is not really stuck, but I can't restart it). Only if I kill the w3wp.exe IIS is restartable and the Webservice will work again (until i again call this service several times). The logfiles (i'm no expert in things like logging or where to find/enable such logs, so to say : i'm a newbie) like http-logging, Event Viewer or WCF-Message Logging don't show any hints upon the source of the problem. I don't have this problem when I'm using a Webservice which doesn't call another Service. Calling a Webservice is done by Service Reference (I'm using no Proxy-Classes), but I think this should be no Problem. I have no idea of what is happening, nor how to solve this Problem. Regards Rene

  Read the article

• Can't block capslock with CGEventTap

  - by Thor Frølich

  I'm using Quartz CGEventTap in an attempt to globally intercept capslock presses and block them (to have them do something useful instead). I succesfully detect capslock presses but have so far been unable to block them. My code (originating from this stackoverflow answer) is something like this: eventTap = CGEventTapCreate(kCGHIDEventTap, kCGTailAppendEventTap, kCGEventTapOptionDefault, eventMask, myCGEventCallback, &oldFlags); runLoopSource = CFMachPortCreateRunLoopSource(kCFAllocatorDefault, eventTap, 0); CFRunLoopAddSource(CFRunLoopGetCurrent(), runLoopSource, kCFRunLoopCommonModes); CGEventTapEnable(eventTap, true); CGEventRef myCGEventCallback(CGEventTapProxy proxy, CGEventType type, CGEventRef theEvent, void *refcon) { CGEventFlags *oldFlags = (CGEventFlags *)refcon; switch (type) { case kCGEventFlagsChanged: { CGEventFlags newFlags = CGEventGetFlags(theEvent); CGEventFlags changedFlags = *oldFlags ^ newFlags; *oldFlags = newFlags; if (changedFlags == 65536) { NSLog(@"Capslock pressed. Let's not return the event"); return NULL; } break; } default: break; } NSLog(@"Different modifier than capslock. Returning the event"); return theEvent; } If I understand correctly returning NULL should effectively block the keypress from propagating. Indeed it also does for "normal" keyup and -down events. However capslock toggles regardless. Any ideas why that is? Am I making incorrect assumptions? And/or how can I do things differently to achieve my goal? Thanks, Thor

  Read the article

• A way to specify a different host in an SSH tunnel from the host in use

  - by Tom

  I am trying to setup an SSH tunnel to access Beanstalk (to bypass an annoying proxy server). I can get this to work, but with one caveat: I have to map my Beanstalk host URL (username.svn.beanstalkapp.com) in my hosts file to 127.0.0.1 (and use the ip in place of the domain when setting up the tunnel). The reason (I think) is that I am creating the tunnel using the local SSH instance (on Snow Leopard) and if I use localhost or 127.0.0.1 when talking to Beanstalk, it rejects the authorisation credentials. I believe this is because Beanstalk use the hostname specified in a request to determine which account the username / password combination should be checked against. If localhost is used, I think this information is missing (in some manner which Beanstalk requires) from the requests. At the moment I dig the IP for username.svn.beanstalkapp.com, map username.svn.beanstalkapp.com to 127.0.0.1 in my hosts file, then for the tunnel I use the command: ssh -L 8080:ip:443 -p 22 -l tom -N 127.0.0.1 I can tell Subversion that the repo. is located at: https://username.svn.beanstalkapp.com:8080/repo-name This uses my tunnel and the username and password are accepted. So, my question is if there is an option when setting up the SSH tunnel which would mean I wouldn't have to use my hosts file workaround?

  Read the article

• Registry remotley hacked win 7 need help tracking the perp

  - by user577229

  I was writing some .VBS code at thhe office that would allow certain file extensions to be downloaded without a warning dialog on a w7x32 system. The system I was writing this on is in a lab on a segmented subnet. All web access is via a proxy server. The only means of accessing my machine is via the internet or from within the labs MSFT AD domain. While writing and testing my code I found a message of sorts. Upon refresing the registry to verify my code changed a dword, instead the message HELLO was written and visible in regedit where the dword value wass called for. I took a screen shot and proceeded to edit my code. This same weird behavior occurred last time I was writing registry code except on another internal server. I understand that remote registry access exists for windows systems. I will block this immediately once I return to the office. What I want to know is, can I trace who made this connection? How would I do this? I suspect the cause of this is the cause of other "odd" behaviors I'm experiencing at work such as losing control of my input director master control for over an hour and unchanged code that all of a sudden fails for no logical region. These failures occur at funny times, whenver I'm about to give a demonstration of my test code. I know this sounds crazy however knowledge of the registry component makes this believable. Once the registry can be accessed, the entire system is compromised. Any help or sanity checking is appreciated.

  Read the article

• Nhibernate join on a table twice

  - by Zuber

  Consider the following Class structure... public class ListViewControl { public int SystemId {get; set;} public List<ControlAction> Actions {get; set;} public List<ControlAction> ListViewActions {get; set;} } public class ControlAction { public string blahBlah {get; set;} } I want to load class ListViewControl eagerly using NHibernate. The mapping using Fluent is as shown below public UIControlMap() { Id(x => x.SystemId); HasMany(x => x.Actions) .KeyColumn("ActionId") .Cascade.AllDeleteOrphan() .AsBag() .Cache.ReadWrite().IncludeAll(); HasMany(x => x.ListViewActions) .KeyColumn("ListViewActionId") .Cascade.AllDeleteOrphan() .AsBag() .Cache.ReadWrite().IncludeAll(); } This is how I am trying to load it eagerly var baseActions = DetachedCriteria.For<ListViewControl>() .CreateCriteria("Actions", JoinType.InnerJoin) .SetFetchMode("BlahBlah", FetchMode.Eager) .SetResultTransformer(new DistinctRootEntityResultTransformer()); var listViewActions = DetachedCriteria.For<ListViewControl>() .CreateCriteria("ListViewActions", JoinType.InnerJoin) .SetFetchMode("BlahBlah", FetchMode.Eager) .SetResultTransformer(new DistinctRootEntityResultTransformer()); var listViews = DetachedCriteria.For<ListViewControl>() .SetFetchMode("Actions", FetchMode.Eager) .SetFetchMode("ListViewActions",FetchMode.Eager) .SetResultTransformer(new DistinctRootEntityResultTransformer()); var result = _session.CreateMultiCriteria() .Add("listViewActions", listViewActions) .Add("baseActions", baseActions) .Add("listViews", listViews) .SetResultTransformer(new DistinctRootEntityResultTransformer()) .GetResult("listViews"); Now, my problem is that the class ListViewControl get the correct records in both Actions and ListViewActions, but there are multiple entries of the same record. The number of records is equal to the number of joins made to the ControlAction table, in this case two. How can I avoid this? If I remove the SetFetchMode from the listViews query, the actions are loaded lazily through a proxy which I don't want.

  Read the article

• How to intercept, parse and compile?

  - by epitka

  This is a problem I've been struggling to solve for a while. I need a way to either replace code in the method with a parsed code from the template at compile time (PostSharp comes to mind) or to create a dynamic proxy (Linfu or Castle). So given a source code like this [Template] private string GetSomething() { var template = [%=Customer.Name%] } I need it to be compiled into this private string GetSomething() { MemoryStream mStream = new MemoryStream(); StreamWriter writer = new StreamWriter(mStream,System.Text.Encoding.UTF8); writer.Write(@"" ); writer.Write(Customer.Name); StreamReader sr = new StreamReader(mStream); writer.Flush(); mStream.Position = 0; return sr.ReadToEnd(); } It is not important what technology is used. I tried with PostSharp's ImplementMethodAspect but got nowhere (due to lack of experience with it). I also looked into Linfu framework. Can somebody suggest some other approach or way to do this, I would really appreciate. My whole project depends on this.

  Read the article

• C# webservice async callback not getting called on HTTP 407 error.

  - by Ben

  Hi, I am trying to test the use-case of a customer having a proxy with login credentials, trying to use our webservice from our client. If the request is synchronous, my job is easy. Catch the WebException, check for the 407 code, and prompt the user for the login credentials. However, for async requests, I seem to be running into a problem: the callback is never getting called! I ran a wireshark trace and did indeed see that the HTTP 407 error was being passed back, so I am bewildered as to what to do. Here is the code that sets up the callback and starts the request: TravelService.TravelServiceImplService svc = new TravelService.TravelServiceImplService(); svc.Url = svcUrl; svc.CreateEventCompleted += CbkCreateEventCompleted; svc.CreateEventAsync(crReq, req); And the code that was generated when I consumed the WSDL: public void CreateEventAsync(TravelServiceCreateEventRequest CreateEventRequest, object userState) { if ((this.CreateEventOperationCompleted == null)) { this.CreateEventOperationCompleted = new System.Threading.SendOrPostCallback(this.OnCreateEventOperationCompleted); } this.InvokeAsync("CreateEvent", new object[] { CreateEventRequest}, this.CreateEventOperationCompleted, userState); } private void OnCreateEventOperationCompleted(object arg) { if ((this.CreateEventCompleted != null)) { System.Web.Services.Protocols.InvokeCompletedEventArgs invokeArgs = ((System.Web.Services.Protocols.InvokeCompletedEventArgs)(arg)); this.CreateEventCompleted(this, new CreateEventCompletedEventArgs(invokeArgs.Results, invokeArgs.Error, invokeArgs.Cancelled, invokeArgs.UserState)); } } Debugging the WS code, I found that even the SoapHttpClientProtocol.InvokeAsync method was not calling its callback as well. Am I missing some sort of configuration?

  Read the article

• What do I name this class whose sole purpose is to report failure?

  - by Blair Holloway

  In our system, we have a number of classes whose construction must happen asynchronously. We wrap the construction process in another class that derives from an IConstructor class: class IConstructor { public: virtual void Update() = 0; virtual Status GetStatus() = 0; virtual int GetLastError() = 0; }; There's an issue with the design of the current system - the functions that create the IConstructor-derived classes are often doing additional work which can also fail. At that point, instead of getting a constructor which can be queried for an error, a NULL pointer is returned. Restructuring the code to avoid this is possible, but time-consuming. In the meantime, I decided to create a constructor class which we create and return in case of error, instead of a NULL pointer: class FailedConstructor : public IConstructor public: virtual void Update() {} virtual Status GetStatus() { return STATUS_ERROR; } virtual int GetLastError() { return m_errorCode; } private: int m_errorCode; }; All of the above this the setup for a mundane question: what do I name the FailedConstructor class? In our current system, FailedConstructor would indicate "a class which constructs an instance of Failed", not "a class which represents a failed attempt to construct another class". I feel like it should be named for one of the design patterns, like Proxy or Adapter, but I'm not sure which.

  Read the article

• Destructors not called when native (C++) exception propagates to CLR component

  - by Phil Nash

  We have a large body of native C++ code, compliled into DLLs. Then we have a couple of dlls containing C++/CLI proxy code to wrap the C++ interfaces. On top of that we have C# code calling into the C++/CLI wrappers. Standard stuff, so far. But we have a lot of cases where native C++ exceptions are allowed to propagate to the .Net world and we rely on .Net's ability to wrap these as System.Exception objects and for the most part this works fine. However we have been finding that destructors of objects in scope at the point of the throw are not being invoked when the exception propagates! After some research we found that this is a fairly well known issue. However the solutions/ workarounds seem less consistent. We did find that if the native code is compiled with /EHa instead of /EHsc the issue disappears (at least in our test case it did). However we would much prefer to use /EHsc as we translate SEH exceptions to C++ exceptions ourselves and we would rather allow the compiler more scope for optimisation. Are there any other workarounds for this issue - other than wrapping every call across the native-managed boundary in a (native) try-catch-throw (in addition to the C++/CLI layer)?

  Read the article

• Silverlight 3 + Java WebService

  - by Heko

  Hello! I have a Silverlight 3 project, and I need to call a Java WebService - the bindings are ok (SOAP 1.1 and basicHttpBinding): ClientConfig File: <configuration> <system.serviceModel> <bindings> <basicHttpBinding> <binding name="SkyinfoTestInterfaceExport2_SkyinfoTestInterfaceHttpBinding" maxBufferSize="2147483647" maxReceivedMessageSize="2147483647"> <security mode="None"> <transport> <extendedProtectionPolicy policyEnforcement="Never" /> </transport> </security> </binding> </basicHttpBinding> </bindings> <client> <endpoint address="myAddress" binding="basicHttpBinding" bindingConfiguration="SkyinfoTestInterfaceExport2_SkyinfoTestInterfaceHttpBinding" contract="SkyInfoServiceReference.SkyinfoTestInterface" name="SkyinfoTestInterfaceExport2_SkyinfoTestInterfaceHttpPort" /> </client> </system.serviceModel> When I call a method on client I get this Policy error: An error occurred while trying to make a request to URI '...'. This could be due to attempting to access a service in a cross-domain way without a proper cross-domain policy in place, or a policy that is unsuitable for SOAP services. You may need to contact the owner of the service to publish a cross-domain policy file and to ensure it allows SOAP-related HTTP headers to be sent. This error may also be caused by using internal types in the web service proxy without using the InternalsVisibleToAttribute attribute. Please see the inner exception for more details. I know about those 2 policy XML filesbut Java EE service which I'm trying to call is hosted on a IBM WebSphere Process Server to which I don't have access. Does anybody know how to work around this policy exception?

  Read the article

• Redirect uploaded files to another server, using nginx

  - by Serg ikS

  I am creating a web service of scheduled posts to some soc. network.Need help dealing with file uploads under high traffic. Process overview: User uploads files to SomeServer (not mine). SomeServer then responds with a JSON string. My web app should store that JSON response. Opt. 1 — Save, cURL POST, delete tmp The stupid way I made it work: User uploads files to MyWebApp; MyWebApp cURL's the file further to SomeServer, getting the response. Opt.2 — JS magic The smart way it could be perfect: User uploads the file directly to SomeServer, from within an iFrame; MyWebApp gets the response through JavaScript. But this is(?) impossible due to the 'Same Origin Policy', isn't it? Opt. 3 — nginx proxying? The better way for a production server: User uploads files to MyWebApp; nginx intercepts the file uploads and sends them directly to the SomeServer; JSON response is also intercepted by nginx and processed by MyWebApp. Does this make any sense, and what would be the nginx config for, say, /fileupload Location to proxy it to SomeServer ?

  Read the article

• Why am I getting "(304) Not Modified" error on some links when using HttpWebRequest?

  - by Greg

  Hi, Any ideas why on some links that I try to access using HttpWebRequest I am getting "The remote server returned an error: (304) Not Modified." in the code? The code I'm using is from Jeff's post here. Note the concept of the code is a simple proxy server, so I'm pointing my browser at this locally running piece of code, which gets my browsers request, and then proxies it on by creating a new HttpWebRequest, as you'll see in the code. It works great for most sites/links, but for some this error comes up. You will see one key bit in the code is where it seems to copy the http header settings from the browser request to it's request out to the site, and it copies in the header attributes. Not sure if the issue is something to do with how it mimics this aspect of the request and then what happens as the result comes back? case "If-Modified-Since": request.IfModifiedSince = DateTime.Parse(listenerContext.Request.Headers[key]); break; I get the issue for example from http://en.wikipedia.org/wiki/Main_Page thanks

  Read the article

• How to specify a parameter as part of every web service call?

  - by LES2

  Currently, each web service for our application has a user parameter that is added for every method. For example: @WebService public interface FooWebService { @WebMethod public Foo getFoo(@WebParam(name="alwaysHere",header=true,partName="alwaysHere") String user, @WebParam(name="fooId") Long fooId); @WebMethod public Result deletetFoo(@WebParam(name="alwaysHere",header=true,partName="alwaysHere") String user, @WebParam(name="fooId") Long fooId); // ... } There could be twenty methods in a service, each with the first parameter as user. And there could be twenty web services. We don't actually use the 'user' argument in the implementations - in fact, I don't know why it's there - but I wasn't involved in the design, and the person that put it there had a reason (I hope). Anyway, I'm trying to straighten out this Big Ball of Mud. I have already come a long way by wrapping the web services by a Spring proxy, which allows me to do some before-and-after processing in an interceptor (before there were at least 20 lines of copy-pasted boiler plate per method). I'm wondering if there's some kind of "message header" I can apply to the method or package and that can be accessed by some type of handler or something outside of each web service method. Thanks in advance for the advice, LES

  Read the article

• Cannot implicity convert type void to System.Threading.Tasks.Task<bool>

  - by sagesky36

  I have a WCF Service that contains the following method. All the methods in the service are asynchrounous and compile just fine. public async Task<Boolean> ValidateRegistrationAsync(String strUserName) { try { using (YeagerTechEntities DbContext = new YeagerTechEntities()) { DbContext.Configuration.ProxyCreationEnabled = false; DbContext.Database.Connection.Open(); var reg = await DbContext.aspnet_Users.FirstOrDefaultAsync(f => f.UserName == strUserName); if (reg != null) return true; else return false; } } catch (Exception) { throw; } } My client application was set to access the WCF service with the check box for the "Allow generation of asynchronous operations" and it generated the proxy just fine. I am receiving the above subject error when trying to call this WCF service method from my client with the following code. Mind you, I know what the error message means, but this is my first time trying to call an asynchronous task in a WCF service from a client. Task<Boolean> blnMbrShip = db.ValidateRegistrationAsync(FormsAuthentication.Decrypt(cn.Value).Name); What do I need to do to properly call the method so the design time compile error disappears? Thanks so much in advance...

  Read the article

• Servlet Mapping Help - Possible to Avoid Referencing Context Name?

  - by AJ

  Hi all, I am working on a Spring application and trying to get my URL mapping correct. What I would like to have work is the following: http://localhost:8080/idptest -> doesn't work But instead, I have to reference the context name in my URL in order to resolve the mapping: http://localhost:8080/<context_name>/idptest -> works How can I avoid the requirement of referencing the context name in my URL without using a rewrite/proxy engine e.g. Apache? Here is the servlet definition and mapping from my web.xml: <servlet> <servlet-name>idptest</servlet-name> <servlet-class>org.springframework.web.servlet.DispatcherServlet</servlet-class> <init-param> <param-name>contextConfigLocation</param-name> <param-value>/WEB-INF/conf/idptest.xml</param-value> </init-param> <load-on-startup>1</load-on-startup> </servlet> <servlet-mapping> <servlet-name>idptest</servlet-name> <url-pattern>/</url-pattern> </servlet-mapping> Here's the outline of my controller (showing annotations for request mappings): @Controller @RequestMapping("/idptest") public class MyController { @RequestMapping(method=RequestMethod.GET) public String setupForm(Model model){ MyObject someObject = new MyObject(); model.addAttribute("someObject", someObject); return "myform"; } @RequestMapping(method = RequestMethod.POST) public String processSubmit(@ModelAttribute("someObject") MyObject someObject) throws Exception { // POST logic... } } Thanks!

  Read the article

• The rules to connect a web service trough the SSL and Certificates

  - by blgnklc

  There is a web service running on tomcat on a server. It is built on Java Servlet. It is listening others to call itself on a SSL enabled http port. so its web service adreess looks like: https://172.29.12.12/axis/services/XYZClient?wsdl On the other hand I want to connect the web service above from a windows application which is built on .NET frame work. Finally, when I want to connect the web service from my computer; I get some specific erros; Firstly I get; Proxy authentication error; then I added some new line to my code; Dim cr As System.Net.NetworkCredential = New System.Net.NetworkCredential("xname", "xsurname", "xdomainname") Dim myProxy As New WebProxy("http://mar.xxxyyy.com", True) myProxy.Credentials = cr Secondly, after this modifications It says that bad request. I did not get over this error. Moreover I did try to connect the web server on the same computer. I copied my executable program to the computer where the web service runs. The error was like; The underlying connection was closed: Could not establish trust relationship for SSL/TLS secure channel PS: When I try to connect to web service by using Internet Explorer; I see firstly some warnings about accepting an unknown certificate and I click take me to web service an I get there clearly. I want to know what are the basic elements to connect a web service, could you please tell me the requirements that I have to use on my windows project. regards bk

  Read the article

• why am I stuck on "Initiating update" when deploying to google

  - by michelle

  I've have not had any trouble deploying through eclipse until now. I'm guessing it might have to do with all the stuff I've added today a folder of .pdf and .tex files (in war/web-inf directory) a bit of JDO stuff and a servlet that reads the files in the directory and indexes them into the JDO Is there any way to find out what exactly is the problem? I currently get stuck at "Initiating update" and the stack trace say "ConnectionReset" Any helkp of imput will be appreciated, I really need to deploy this today, thanks! here's the deploy trace: Unable to update: java.net.SocketException: Connection reset at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source) at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source) at java.lang.reflect.Constructor.newInstance(Unknown Source) at sun.net.www.protocol.http.HttpURLConnection$6.run(Unknown Source) at java.security.AccessController.doPrivileged(Native Method) at sun.net.www.protocol.http.HttpURLConnection.getChainedException(Unknown Source) at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source) at java.net.HttpURLConnection.getResponseCode(Unknown Source) at com.google.appengine.tools.admin.ServerConnection.getAuthCookie(ServerConnection.java:315) at com.google.appengine.tools.admin.ServerConnection.authenticate(ServerConnection.java:219) at com.google.appengine.tools.admin.ServerConnection.send(ServerConnection.java:145) at com.google.appengine.tools.admin.ServerConnection.post(ServerConnection.java:81) at com.google.appengine.tools.admin.AppVersionUpload.send(AppVersionUpload.java:427) at com.google.appengine.tools.admin.AppVersionUpload.beginTransaction(AppVersionUpload.java:241) at com.google.appengine.tools.admin.AppVersionUpload.doUpload(AppVersionUpload.java:98) at com.google.appengine.tools.admin.AppAdminImpl.update(AppAdminImpl.java:56) at com.google.appengine.eclipse.core.proxy.AppEngineBridgeImpl.deploy(AppEngineBridgeImpl.java:271) at com.google.appengine.eclipse.core.deploy.DeployProjectJob.runInWorkspace(DeployProjectJob.java:148) at org.eclipse.core.internal.resources.InternalWorkspaceJob.run(InternalWorkspaceJob.java:38) at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55) Caused by: java.net.SocketException: Connection reset at java.net.SocketInputStream.read(Unknown Source) at java.io.BufferedInputStream.fill(Unknown Source) at java.io.BufferedInputStream.read1(Unknown Source) at java.io.BufferedInputStream.read(Unknown Source) at sun.net.www.http.HttpClient.parseHTTPHeader(Unknown Source) at sun.net.www.http.HttpClient.parseHTTP(Unknown Source) at sun.net.www.http.HttpClient.parseHTTP(Unknown Source) at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source) at sun.net.www.protocol.http.HttpURLConnection.getHeaderFieldKey(Unknown Source) at com.google.appengine.tools.util.ClientCookieManager.readCookies(ClientCookieManager.java:123) at com.google.appengine.tools.admin.ServerConnection.connect(ServerConnection.java:340) at com.google.appengine.tools.admin.ServerConnection.getAuthCookie(ServerConnection.java:314) ... 11 more

  Read the article

• Poor performance using RMI-proxies with Swing components

  - by Patrick

  I'm having huge performance issues when I add RMI proxy references to a Java Swing JList-component. I'm retrieving a list of user Profiles with RMI from a server. The retrieval itself takes just a second or so, so that's acceptable under the circumstances. However, when I try to add these proxies to a JList, with the help of a custom ListModel and a CellRenderer, it takes between 30-60 seconds to add about 180 objects. Since it is a list of users' names, it's preferrable to present them alphabetically. The biggest performance hit is when I sort the elements as they get added to the ListModel. Since the list will always be sorted, I opted to use the built-in Collections.binarySearch() to find the correct position for the next element to be added, and the comparator uses two methods that are defined by the Profile interface, namely getFirstName() and getLastName(). Is there any way to speed this process up, or am I simply implementing it the wrong way? Or is this a "feature" of RMI? I'd really love to be able to cache some of the data of the remote objects locally, to minimize the remote method calls.

  Read the article

• WCF webHttpBinding with jQuery AJAX - removing/working around same origin policy

  - by csauve

  So I'm trying to create a C# WCF REST service that is called by jQuery. I've discovered that jQuery requires that AJAX calls are made under the same origin policy. I have a few questions for how I might proceed. I am already aware of; 1. The hacky solution of JSONP with a server callback 2. The way too much server overhead of having a cross-domain proxy. 3. Using Flash in the browser to make the call and setting up crossdomain.xml at my WCF server root. I'd rather not use these because; 1. I don't want to use JSON, or at least I don't want to be restricted to using it 2. I would like to separate the server that serves static pages from the one that serves application state. 3. Flash in this day in age is out of the question. What I'm thinking: is there anything like Flash's crossdomain.xml file that works for jQuery? Is this "same-origin" policy a part of jQuery or is it a restriction in specific browsers? If it's just a part of jQuery, maybe I'll try digging in the code to work around it.

  Read the article

• Improving my first Clojure program

  - by StackedCrooked

  After a few weekends exploring Clojure I came up with this program. It allows you to move a little rectangle in a window. Here's the code: (import java.awt.Color) (import java.awt.Dimension) (import java.awt.event.KeyListener) (import javax.swing.JFrame) (import javax.swing.JPanel) (def x (ref 0)) (def y (ref 0)) (def panel (proxy [JPanel KeyListener] [] (getPreferredSize [] (Dimension. 100 100)) (keyPressed [e] (let [keyCode (.getKeyCode e)] (if (== 37 keyCode) (dosync (alter x dec)) (if (== 38 keyCode) (dosync (alter y dec)) (if (== 39 keyCode) (dosync (alter x inc)) (if (== 40 keyCode) (dosync (alter y inc)) (println keyCode))))))) (keyReleased [e]) (keyTyped [e]))) (doto panel (.setFocusable true) (.addKeyListener panel)) (def frame (JFrame. "Test")) (doto frame (.add panel) (.pack) (.setDefaultCloseOperation JFrame/EXIT_ON_CLOSE) (.setVisible true)) (defn drawRectangle [p] (doto (.getGraphics p) (.setColor (java.awt.Color/WHITE)) (.fillRect 0 0 100 100) (.setColor (java.awt.Color/BLUE)) (.fillRect (* 10 (deref x)) (* 10 (deref y)) 10 10))) (loop [] (drawRectangle panel) (Thread/sleep 10) (recur)) Despite being an experienced C++ programmer I found it very challenging to write even a simple application in a language that uses a radically different style than what I'm used to. On top of that, this code probably sucks. I suspect the globalness of the various values is a bad thing. It's also not clear to me if it's appropriate to use references here for the x and y values. Any hints for improving this code are welcome.

  Read the article

• NHibernate. DTO -> Domain

  - by Andrew Kalashnikov

  Hello guys. I've got SOA which processing data for diff clients(asp,sl). The base of this design is domains of my business model. For transporting,showing it to clients I use DTO. For mapping domain to DTO I use AutoMapper. Now I should persist new entities from clients. I want use my DTO's at this scenario too. So i've got some questions as I'm not much familiar with this design 1) Is it a good practice build DTO on client and send it to web-service on the wire? MayBe i should pass my domains? 2) Is it possible have several DTO's to one domain (one show at grid, and one to save). For saving I need set all nonprimitive props at client. 3) DTO - to Domain. If I've got int can I use AutoMapper to generate NHibernate Proxy for this ID, or I should do i manually. Your expierence and practice are very interesting. Thanks for answer!!!

  Read the article

• Eclipse 3.7 Classic Nightmare - ADT Installation

  - by Cal

  I've been trying to install the ADT for Eclipse Classic 3.7 to no avail. From what I've seen on searches, the general consensus seems to be to update the software, but alas I cannot do that, either. BELOW: An example of the error message received when trying to update Eclipse, or when attempting to install from a web location. Some sites could not be found. See the error log for more detail. Unable to read repository at http://download.eclipse.org/eclipse/updates/3.7/content.xml. Cannot assign requested address: JVM_Bind I followed the troubleshooting recommendations of Google/Android's developer section, and attempted to install ADT via archive. BELOW: The resulting error from attempting to install via archive. Cannot complete the install because one or more required items could not be found. Software being installed: Android Development Tools 11.0.0.v201105251008-128486 (com.android.ide.eclipse.adt.feature.group 11.0.0.v201105251008-128486) Missing requirement: Android Development Tools 11.0.0.v201105251008-128486 (com.android.ide.eclipse.adt.feature.group 11.0.0.v201105251008-128486) requires 'org.eclipse.gef 0.0.0' but it could not be found Now, from what I hear, the inability to update/install via Internet seems to be a proxy-related issue, however I don't believe that I'm under any such thing (I'm just using my computer connected to my home network for this). I'm using the most up-to-date versions of anything I can think of (ADT, Eclipse, SDK Tools etc). I'm using Windows 7 Ultimate 64bit, and am using the 64bit version of Eclipse Classic.

  Read the article

• Why wouldn't the default Control Adapter mappings work on Chrome or Safari?

  - by Deane

  I have confirmed that my Control Adapters are not triggering in Chrome and Safari. I've debugged, and the breakpoints inside the adapters just don't get hit in Chrome/Safari, when they work perfectly find in Firefox/IE. So, for Chrome/Safari, IIS is just ignoring the mapping. My AdapterMappings.browser file looks like this: <browsers> <browser refID="Default"> <controlAdapters> [...adapters here....] </controlAdapters> </browser> </browsers> This should provide mappings for all browsers, correct? I used the Charles proxy to check what user agents were being sent. They are: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.1.249.1064 Safari/532.5 Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7 Any idea why this would be? Everything I've read tells me that my browser mappings are correct? And, as I said this works for IE/Firefox, so I know my configuration is technically correct.

  Read the article

• Setting up relations/mappings for a SQLAlchemy many-to-many database

  - by Brent Ramerth

  I'm new to SQLAlchemy and relational databases, and I'm trying to set up a model for an annotated lexicon. I want to support an arbitrary number of key-value annotations for the words which can be added or removed at runtime. Since there will be a lot of repetition in the names of the keys, I don't want to use this solution directly, although the code is similar. My design has word objects and property objects. The words and properties are stored in separate tables with a property_values table that links the two. Here's the code: from sqlalchemy import Column, Integer, String, Table, create_engine from sqlalchemy import MetaData, ForeignKey from sqlalchemy.orm import relation, mapper, sessionmaker from sqlalchemy.ext.declarative import declarative_base engine = create_engine('sqlite:///test.db', echo=True) meta = MetaData(bind=engine) property_values = Table('property_values', meta, Column('word_id', Integer, ForeignKey('words.id')), Column('property_id', Integer, ForeignKey('properties.id')), Column('value', String(20)) ) words = Table('words', meta, Column('id', Integer, primary_key=True), Column('name', String(20)), Column('freq', Integer) ) properties = Table('properties', meta, Column('id', Integer, primary_key=True), Column('name', String(20), nullable=False, unique=True) ) meta.create_all() class Word(object): def __init__(self, name, freq=1): self.name = name self.freq = freq class Property(object): def __init__(self, name): self.name = name mapper(Property, properties) Now I'd like to be able to do the following: Session = sessionmaker(bind=engine) s = Session() word = Word('foo', 42) word['bar'] = 'yes' # or word.bar = 'yes' ? s.add(word) s.commit() Ideally this should add 1|foo|42 to the words table, add 1|bar to the properties table, and add 1|1|yes to the property_values table. However, I don't have the right mappings and relations in place to make this happen. I get the sense from reading the documentation at http://www.sqlalchemy.org/docs/05/mappers.html#association-pattern that I want to use an association proxy or something of that sort here, but the syntax is unclear to me. I experimented with this: mapper(Word, words, properties={ 'properties': relation(Property, secondary=property_values) }) but this mapper only fills in the foreign key values, and I need to fill in the other value as well. Any assistance would be greatly appreciated.

  Read the article

• Twitter api - no more than 150 requests per hour....

  - by RenegadeAndy

  Hi. I am writing a twitter app using jtwitter - and its running inside a server inside my work. Anyway - whenever i run it from work it returns the error below and I am only making a couple requests per hour: HTTP/1.1 400 Bad Request {"request":"/1/statuses/user_timeline.json?count=6&id=cicsdemo&","error":"Rate limit exceeded. Clients may not make more than 150 requests per hour."} ] 2010-06-03 18:44:49 zero.timer.TimerTask::run Thread-3 SEVERE [ CWPZA3100E: Exception during processing for timer task, "twitterTimer". Exception: java.lang.ClassCastException: winterwell.jtwitter.Twitter$Status incompatible with java.lang.String ] I run the same code from home - its fine. So obviously at some point twitter thinks our work is all coming from one direct IP - which is why its hitting a limit which it shouldnt. Do I have any choice or workaround - can i make the limit be counted from my direct machine IP - or to my account instead of IP? Can i use a proxy? Has any body else had this problem and solved it?! Before anyone asks the APP must live inside my work - it cannot run anywhere else! Cheers, Andy

  Read the article

< Previous Page | 208 209 210 211 212 213 214 215 216 217 218 219  | Next Page >