Search Results

Search found 11226 results on 450 pages for 'reverse thinking'.

Page 212/450 | < Previous Page | 208 209 210 211 212 213 214 215 216 217 218 219  | Next Page >

• What is the best CPU I could get for my old setup?

  - by cmbrnt

  On my current not-so-good desktop computer, I'm currently running an Intel Core 2 Duo E6550-CPU, and I'm thinking of buying a newer one now that these must be cheap on E-bay and the like. Being a software guy, I'd be grateful for any help in identifying what CPUs that would fit my motherboard so I don't buy a processor which won't work with my computer. It might not be worth it however, since the SATA2-drive is currently what's bottlenecking my system, but I'm still curious about what could be done except for buying an SSD-drive. I'm providing screenshots of CPU-Z running, to help with the identification. My CPU- and motherboard info: http://i.imgur.com/YdO8x.png

  Read the article

• How to arrange 2 SSD with 2 SATA?

  - by alfish

  I like to have best io performance as well as good capaciyy and reliability out of a server that hosts a busy forum, which involves loads of static files download. I am wondering what is the best plan to format and use the disks given that the server has only 4 disk bays and I have 2 SSD and 2 SATA disks at hand. I am currently thinking about putting the disks in RAID 10 so that SSD contains /var/lib/mysql as well as most of the OS (Likely to be Debian) and SATA disk to contain /path/to/static/files. However I'd like to hear your expert opinion on this. Thanks

  Read the article

• Disk controller speed responsible for slow write speeds?

  - by vizvayu

  I have question. I'm using ESXi 4.0U1 in an IBM x3200M2 with an integrated LSI 1064e RAID controller, without any kind of cache. I have 3 250GB HOT-SWAP SATA HDs configured in RAID1E (IME). ESXi works fine, read speed are quite OK, but write speeds are incredible slow, never more than 8MB/s, and this is the best case scenario, benchmarking with iozone streaming writes, using a VMWare Paravirtual controller and with only this VM active, no swapping of any kind (total vm memory reserved). Already wrote to IBM but I don't have any kind of pay support so they didn't even answered, so I'm just wondering... anybody has any experience with a similar setup? I just want to be sure this is hardware related and can't be fixed with some kind of config option, because I'm thinking on buying a new RAID controller (Adaptec 2405 looks nice). Thanks again!

  Read the article

• iPhone VPN to iTunes Home Sharing [migrated]

  - by Philip Crumpton

  my goal is to set up a VPN on a Windows machine that contains my iTunes library then connect to that VPN with my iPhone and be able to utilize Home Sharing remotely. I have read that this can easily be set up if the iTunes library is on a Mac (Network Beacon and YazSoft ShareTool are two products I quickly found). I can't find anyone who has had success on a Windows machine, though. In my thinking, there are two options (aside from buying a Mac): 1.) Existing utility that takes care of this for me (like the Mac-only options listed above) and is compatible with iPhone (Hamachi is NOT compatible with iPhone VPN) 2.) Manually configure a VPN to allow Bonjour multicast (can't find any information on this) FYI my router is a Linksys WRT54GL running Tomato 1.28

  Read the article

• Which OS should I boot into for virtualization?

  - by acidzombie24

  This might be a silly question. I use windows 7 99% of the time. I run linux 10% of the time and XP 5% of the time. I am thinking about getting a Intel® Core™ i7-2600 Processor which has hardware support for virtualization. I dont think i want more than one partition. May have a swap partition. Which OS should I make my primary (and only) partition? I suspect windows7 if i am always using it as going through a linux layer would slow it down. Does it matter much which OS i use if i have hardware support for virtualization? At the moment I am using VMWare player. I suspect software doesnt effect performance?

  Read the article

• Laptop monitor being very dark, no backlight?

  - by ldigas

  I'm asking for a diagnose of what is probably the problem. Here goes ... laptop monitor (hp 6715s) went dark. I'm using also an external monitor with the laptop, and since it kept its picture, I'm guessing it's not the graphics card. When the night came, and I turned on my desk lamp, I noticed that the laptop monitor is not really not showing anything, but is actually showing my desktop picture - only it's very very very dark. You cannot see anything on it, unless the lamp is focused on it, then you can see the picture, only very dark. Does anybody have any clue what it could be? I'm just looking for informed guessed here, so I have at least some idea of where the problem lies. The closest repair shop is quite some distance away, so going for a bit of self-diagnose before thinking of taking it to them.

  Read the article

• FreeNAS plugins not able to access storage

  - by dave

  I've just setup a FreeNAS box and have a couple plugins (sick beard and SABnzbd) installed. Both of these have you select a directory where downloads should go. My storage is on /mnt/MediaVolume/ however when I navigate to mnt it's an empty directory. When I SSH to the box though, I can see it just fine. I'm thinking it may have something to do with permissions, but I'm not sure. Any suggestions how to allow these plugins to view/have access? Thank you!

  Read the article

• minimum required bandwidth for remote database server

  - by user66734

  I want to build a small warehousing application for my company. We have a central warehouse which distributes to 8 sales points across the country. They insist on an in-house solution. I am thinking to setup a central mySQL db Linux server and have the branches connect to it to store sales. Queries to the db from the branches will be minimum, maybe 10 per hour. However I need all the branches to be able to store each sale data ( product ID, customer ID ) in the central db at peak time at most once every five minutes. My question is can I get away with simple 24mbps/768kbps DSL lines? If not what is the bandwith requirement? Can I rely on a load balancing router to combine additional lines if needed? Can you propose some server hardware specs?

  Read the article

• Password not accepted when resuming from sleep

  - by Comrade

  My HP Pavilion dv-series notebook will not accept the user account password for the logged in user when resuming from sleep - message returned is Incorrect Password. Simply selecting the Switch User option reloads the login screen and allows me to log in as the same user with the same password that was originally rejected. And, yes I've tried it more than one (hundred) times in case you were thinking it's just a case of slippery fingers. Another interesting point is that it appears to be independent of the software running on the machine. Since the issue first appeared, I have done two clean installs where all HD partitions were wiped and new ones created during fresh installation of the OS. The first such clean install was of Ubuntu (Lucid) 10.04 amd-64, the second of Win 7 Pro 64 (from boxed disc and activated post install). Exactly the same symptoms, described above, are exhibited on both platforms. Have engaged in significant amount of Googling an come up empty so any ideas are welcome.

  Read the article

• Google document does not print correctly on Mac 10.7.5 using Chrome

  - by Android Addict

  When attempting to print a Google document, the header does not get printed at all and the text starts almost in the center of the page - cutting off almost half of the text in the printable area horizontally. The vertical alignment appears fine, with the exception of hte missing header. I have searched the product forums at Google, but they are virtually unusable. Endless threads without a solution! For reference, the document prints fine from Windows XP using Chrome. I can also print from other applications on the Mac without issue - so I am thinking it's a Google doc issue at this point.

  Read the article

• Best monitor for reading

  - by wajed

  Will response rate make a difference? What is good brightness? What is a good contrast ratio? Definitely there are other things to look for, so please give me your opinion. Also, what screen size is good for reading? What size would you choose from 17-22? I'm thinking of getting one 17-19 for reading, and one 22 for movies. Or maybe 2 22" one vertical and one horizontal is better? I think I should look for lower native res., right?

  Read the article

• Request to server x Reply from server y

  - by klaasio

  I need some advice from you guys: I'm dealing with a custom loadbalancer/software for which we will use 2 main servers and about 8 slave servers. In short: User sends request to main server, main server will receive and handle the requests, sends a request to a slave server and slave server should send data DIRECTLY to the "user". User - Main server Main server - Slave server Slave server - User The reason for which data should be send directly to the user and not through the main server is because of bandwidth and low budget. Now I have the following idea's: -IPinIP, but that is not possible in Layer7 (so far i know there some expensive routers for that) -IP Spoof, using C/C++ we will make it look like the reply came from main server. But I was thinking, perhaps the reply "slave server - User" could just come from a different IP without causing issues in the firewall from the user or his anti-virus. I don't know so well about "home" firewalls/routers and/or anti-virus software. I guess the user machine wouldn't handle it well?

  Read the article

• Any reasonable UPS for a Desktop PC, just to shut it down?

  - by Michael Stum

  While I do have a surge protector to protect against overvoltage (hopefully), I have nothing against undervoltage. When a lightning storm hits, I had the lights flickering at some point. The PC continued to run, but it got me thinking of getting a UPS as a way to a) have a clean 120V/60Hz power source and b) have a way to shut down the PC in case something bad happens. I heard not all UPS' protect against power spikes, so I wonder if someone has a recommendation? It does not need to keep the PC on for a long time if the power goes out, it's good enough if it shuts down the PC after 5 minutes or so. There are 2 PCs connected. One is a Core i7-860 with a Radeon 5870 running Windows 7 Ultimate (so quite power hungry. It uses a 600W PSU but I have no measurements of the actual usage), the other one is a Windoes Home Server, running WHS/Windows Server 2003. Any recommendations in the low-price segment?

  Read the article

• How to backup data from linux servers to linux server (incremental + snapshot)?

  - by wag2639

  We have a handful of hosted servers running RHEL4 and RHEL5 and would like to backup some key folders (I'm thinking /var /srv and /etc) to a local server we have in house. The local server is running Ubuntu 9.10 Server edition. I'm looking for a free (preferably OSS) way to grab (or push) incremental backups to my local server and once a month or so, make a new snapshot for incremental updates in between snapshots. Also, while I'm comfortable with using a command line, others may need to use the system in the future, and I would like some kind of graphical or web interface to browse the backup repository. Suggestions?

  Read the article

• Hardware advice for bitmap / openGL image processing server?

  - by pdizz

  I am trying to work out a build for a processing server to handle bitmap processing as well as openGL rendering for chroma-keying images and Photoshop automation. My searches here and on Google have turned up surprisingly few results, and seeing that there aren't tags for bitmap or image processing I take it this is a specialized application. The bitmap processing is very cpu-intensive while the chroma-keying and Photoshop stuff is gpu-intensive. I doubt this is a case of over-optimization as our company batches thousands of images a day (currently on individual workstations) and any saving in processing time and workstation down-time would be beneficial. Does anyone have any experience with this type of processing server? Any special considerations that would go into a build like this or am I over-thinking it?

  Read the article

• How to backup data from linux servers to linux server (incremental + snapshot)?

  - by wag2639

  We have a handful of hosted servers running RHEL4 and RHEL5 and would like to backup some key folders (I'm thinking /var /srv and /etc) to a local server we have in house. The local server is running Ubuntu 9.10 Server edition. I'm looking for a free (preferably OSS) way to grab (or push) incremental backups to my local server and once a month or so, make a new snapshot for incremental updates in between snapshots. Also, while I'm comfortable with using a command line, others may need to use the system in the future, and I would like some kind of graphical or web interface to browse the backup repository. Suggestions?

  Read the article

• Amazon S3: allow users to upload on a restricted basis (per bucket maybe)?

  - by Tom

  Hi there, I'm thinking about signing up to the Amazon S3 storage service. What I want to do is create a service where other people can register their own bucket with a certain amount of storage. These users will install my software, which then uploads their files. Of course, the users may only upload what they have paid for. For this to work I would like to create a separate bucket for each customer, each with its own properties. Question 1: is this possible with the API? How? This means that the installed software must have the rights needed to upload to my Amazon S3 account. Question 2: can I create individual authentication IDs for each bucket or customer, so that they can only upload with restrictions I have set? Thanks in advance.

  Read the article

• iSCSI drives suddenly inaccessible or corrupted

  - by Hammer1

  I have two NAS (Seagate Black Armors) connected to our network through iSCSI to a Dell Optiplex 760 running 32-bit Windows 7 and Windows iSCSI Initiator. For some unknown reason within the last week both are reportedly inaccessible and/or corrupt (that is the error message generated when I attempt to open the on the iSCSI computer). However, connecting to either of them via direct IP goes off without a hitch. I've tried Error checking but received "The disk check could not be performed because Windows could not access the disk." I've tried System Recover to a date almost two weeks back thinking Windows update may have caused the issue but there is no change. Anyone have an explanation and/or a solution to get them reconnected? Thanks.

  Read the article

• Redirect channel to another speaker

  - by stex

  Hi, I'm not sure about the title but don't know how to say it in a clearer way. My Soundcard is a Creative X-Fi and I'm using the Creative console starter. Now I'd like to use my speakers not only for my normal screens but also when using a beamer. Due to my room's geometry, the only place for the beamer's projection is a wall which is right to my normal screens (so the projection would be between the front right and the rear right speaker). Now I'm thinking about redirecting the channels to the correct speakers somehow. As far as I remember, in previous version of creative console starter there was an option to do this (e.g. redirect front left to rear right output channel). Does anyone know how to do this with software? Of course I could install a cable switch, but if there's a way without I'd prefer this :) Thanks in advance.

  Read the article

• How to forward DHCP A record registration to another domain

  - by ServerUsedConfusion

  I'm currently at work and we're having some troubles. We want to create a new domain for our area, but the DHCP server is not in our control. The DHCP server lists DNS as testdomain.com, however we want to make a new domain called testdomain1.com. We've been thinking of fowarding the DNS from testdomain.com to testdomain1.com so that way DHCP doesn't have to be changed. Basically Client requests testdomain1.com DHCP says DNS is at testdomain.com testdomain.com tells client to go to testdomain1.com client registers in AD at testdomain1.com and adds it's A record to DNS at testdomain1.com

  Read the article

• What's a worthwhile test for a new HD?

  - by Michael Kohne

  I work for a company that uses standard 2.5" SATA HD's in our product. We presently test them by running the Linux 'badblocks -w' command on them when we get them - but they are 160 gig drives, so that takes like 5 hours (we boot parted magic onto a PC to do the scan). We don't actually build that many systems at a time, so this doable, but seriously annoying. Is there any research or anecdotal evidence on what a good incoming test for a hard drive should be? I'm thinking that we should just wipe them with all zeros, write out our image, and do a full drive read back. That would end up being only about 1 hour 45 minutes total. Given that drives do block remapping on their own, would what I've proposed show up any infant mortality just as well as running badblocks?

  Read the article

• Is putting swapfile & temp folder in ramdisk a good idea in Windows 7 64 bit with lots of ram?

  - by Tony_Henrich

  I want my Windows to run as fast as possible. If I have 12GB ram in Windows 7 64bit, quad core cpu, and all apps fit in memory, will the swap file ever be used for anything? The question is about if its a good idea to put the swap file in a ram disk. Would a ram disk help in any way or will Windows intelligently use all the available memory for all its work? I am also thinking of putting the temp folder in a ram disk. I know ram disk is volatile memory and I don't care about its content in it if it gets lost.

  Read the article

• What is the easiest way to make a backup of an entire hard disk

  - by Solignis

  Hi there, I got myself a dell laptop from the local computer store. Its a used machine with Windows Vista Home Basic on it. I want to load Ubuntu Desktop 10.10 though so I can do perl development. BUT I want to keep a copy of the entire harddrive with the dell utility partition and Windows Vista in case I want to go back. I was thinking I could image the drive but I not sure what to use, I don't have Ghost or anything, Someone had told me about Clonezilla. Would that work for me? Is it hard to use? Also I want to burn the data to a DVD or something more storable than a harddisk.

  Read the article

• What is the easiest way to make a backup of an entire hard disk

  - by Solignis

  Hi there, I got myself a dell laptop from the local computer store. Its a used machine with Windows Vista Home Basic on it. I want to load Ubuntu Desktop 10.10 though so I can do perl development. BUT I want to keep a copy of the entire harddrive with the dell utility partition and Windows Vista in case I want to go back. I was thinking I could image the drive but I not sure what to use, I don't have Ghost or anything, Someone had told me about Clonezilla. Would that work for me? Is it hard to use? Also I want to burn the data to a DVD or something more storable than a harddisk.

  Read the article

• Readyboost on Windows 7 x64

  - by RobLaw84

  I'm thinking of bying 1 or more flash drives or an SD card to use with the readyboost function on by 64bit Windows 7 machine. I have a few questions regarding it before i put my hand in my pocket and buy anything. If i go ahead I would be using the fastest available flash/SD. I have 6GB of RAM current installed so will readyboost make any difference to boot / program load times? Will 2 x 2GB flash drives be quicker than 1 x 4GB or is the limitation on the motherboard? Would an SD card better than USB flash drive? thanks

  Read the article

< Previous Page | 208 209 210 211 212 213 214 215 216 217 218 219  | Next Page >