Search Results

Search found 7299 results on 292 pages for 'peter short'.

Page 213/292 | < Previous Page | 209 210 211 212 213 214 215 216 217 218 219 220  | Next Page >

• Limiting bandwith on an Windows 7 machine

  - by Mihai Damian

  I need to limit the bandwidth on my Windows 7 x64 machine. In the past (on XP) I've been able to use NetLimiter for similar tasks. However for some reason I can't get it to work anymore. For lower limits the bandwidth tests are able to exceed the limit by 10-50%; higher limits seem to be ignored completely and the bandwidth tests report download speeds of over 10 times the speed I set. I'm using speedtest.net and some similar service from my ISP for these tests. Anyway, I don't necessarily need a program as complex as NetLimiter since I only need to throttle my machine's bandwidth, not a specific program's. In case you are wondering why in the world I'd want to cripple my Internet speed, there is a funny story behind this. Long story short, my modem gets random disconnects. Tech support comes in, says my Internet speed is abnormally high and I must be using some tools to somehow make it go faster than it's supposed to and this messes up my modem. I check the connection with another computer and it seems that my PC is the only one in my network that gets abnormal speeds. I reinstall my OS, speed looks normal at first, after I install the batch of 50 or so updates, it goes back to abnormally high speeds and the disconnect problems are not solved. Now I don't have a clue if the explanation the tech team gave me was just a strategy to lay the blame on someone else, but I was trying to give them the benefit of the doubt and see what happens if I really reduce my speed to their specification. Any help appreciated.

  Read the article

• Installation of Active Directory on separate VM from DNS does not entierly work - not sure why

  - by René Kåbis

  Not sure what I am doing wrong here. I have a moderately midrange server (16 cores, 2Ghz, 32GB ECC REG RAM, 6TB storage, nothing too extreme) where I am running Hyper-V (Server 2012 R2 Enterprise) in order to provision virtual machines. So why an AD separate from DNS? I want redundancy. I want to be able to move VMs and back them up individually and not have too many services on any one VM. I have already provisioned a VM with DNS, and have set it up right -- essentially, I have: Set up Static IP’s for everyone involved. Installed the DNS service on the DNS VM. Created a forward lookup zone and a reverse lookup zone (primary zone) xyz.ca Configured the zones to use nonsecure and secure dynamic updates (i will change this to secure later after the domain controller is online). Created a A record for the DC in the forward lookup zone (and a reverse ptr) Changed DC’s DNS server (network settings) to the new DNS server. Checked that I can ping the dns server from the new DC by hostname. When I went ahead and did a DCpromo on the DC, and un-cheked the “install DNS” option, everything seemed to go well (no error messages), but I saw no changes on the DNS server whatsoever (no additional settings). Plus, the DNS server seems to be unable to join the domain, as it claims that the domain is not discoverable. As a final note, I do run Symantec Endpoint Protection, which includes a firewall and most settings set as default. I have not yet tried turning this off, but my experience has been that if a service would open up a port on a Windows firewall, it would do the same through Symantec. There is pretty tight integration these days with corporate-class AV and Windows. I have a template vhdx fully set up (just short of any special roles and features) that I can use to replace the current AD VM with, so doing this all over again is not too much skin off of my nose.

  Read the article

• redirect temporarily STDOUT to another file descriptor, but still to screen

  - by Carlos Campderrós

  I'm making a script that executes some commands inside, and these commands show some output on STDOUT (and STDERR as well, but that's no problem). I need that my script generates a .tar.gz file to STDOUT, so the output of some commands executed in the script also go to STDOUT and this ends with a not valid .tar.gz file in the output. So, in short, it's possible to output the first commands to the screen (as I still want to see the output) but not via STDOUT? Also I would like to keep the STDERR untouched so only error messages appear there. A simple example of what I mean. This would be my script: #!/bin/bash # the output of these commands shouldn't go to STDOUT, but still appear on screen some_cmd foo bar other_cmd baz #the following command creates a tar.gz of the "whatever" folder, #and outputs the result to STDOUT tar zc whatever/ I've tried messing with exec and the file descriptors, but I still can't get it to work: #!/bin/bash # save STDOUT to #3 exec 3>&1 # the output of these commands should go to #3 and screen, but not STDOUT some_cmd foo bar other_cmd baz # restore STDOUT exec 1>&3 # the output of this command should be the only one that goes to STDOUT tar zc whatever/ I guess I'm lacking closing STDOUT after the first exec and reopen it again or something, but I can't find the right way to do it (right now the result is the same as if I didn't add the execs

  Read the article

• How to install port versions of perl modules for perl5.14 in freebsd 9.0

  - by jm666

  Trying to use perl5.14 on Freebsd with port based p5-modules. uname -impr 9.0-RELEASE amd64 amd64 ALTQ delete all installed ports, start with a clean system # pkg_delete -a # rm -rf /var/db/pkg /var/db/ports /usr/local installing portmaster, checking /etc/make.conf (here is only WITHOUT_X11=YES). Now installing perl. # portmaster -g --force-config lang/perl5.14 # perl -v This is perl 5, version 14, subversion 2 (v5.14.2) built for amd64-freebsd-multi Now perl modules from the ports, # portmaster -g devel/p5-Moose #install Moose and its deps check with pkg_info and got zilion errors like: # pkg_info pkg_info: corrupted record (pkgdep line without argument), ignoring dpendecy check with portmaster - showing dependecies on perl5.12 #portmaster --check-depends Checking p5-Class-C3-0.24 ===>>> lang/perl5.12 is listed as a dependency ===>>> but there is no installed version ===>>> Delete this dependency data? y/n [n] when tried # perl-after-upgrade -f got: Fixed 0 packages (0 files moved, 0 files modified) In short: i got installed Moose into /usr/local/lib/perl5/site_perl/5.14.2/ but all its dependencies into /usr/local/lib/perl5/site_perl/5.12.4/ Yes, it is possible fix this with: # portmaster p5- what reinstall all installed p5-packages once again, now correctly for the 5.14 but it is terrible installing them twice... Questions: What is the correct way install p5-MODULES from ports with installed perl5.14 in an clean system? How to fix wrong dependency data on perl5.12 without the need install and reinstall them again What i'm doing wrong? Ps: know perlbrew and/or Local::lib - but for this case - want port versions.

  Read the article

• Outlook 2007 will not send/receive using RPC over HTTP to an exchange server.. works for other users

  - by bob franklin smith harriet

  I have an incredibly frustrating user issue that I have been unable to resolve for over a week, any ideas for this would be greatly appreciated. The user is having troubles using Outlook 2007 to send or receive emails over using RPC over HTTP (Outlook Anywhere) to an exchange server. Basically what happens, the connection will be establised and the user will be prompted for the username and password, those are submitted and then outlook tries to download emails which fails and the connection to the exchange server will remain unavailable. The machine can ping and everything to the exchange server there is no connection issue there. The setup worked fine for him up untill now and also works for possibly hundreds of other users using the exact same settings, also the same settings will work from the users iphone on the same internet connection, and from my own system using outlook. The exchange server has the webmail https feature and that can be logged into and send and receive emails fine. Steps taken so far: removing the .ost file for the account and allowing office to rebuild it (fixes the issue for a short period of time, then the same symptons occur) deleted exchange profile and recreated (no change in issue) uninstalled all antivirus and firewalls (no change in issue) removed all cached passwords (keymgr.dll) (no change in issue) removed all entries from the hosts file (no change in issue) uninstalled and reinstalled office 2007 (Temporary fix of issue) Installing Symantec Endpoint Client caused a lot of email scan popups to be displayed, after a reboot this stopped and a scan it picked a few trojans that it removed. This fixed the issue temporarily as well, the issue is back again now. I am completely out of ideas now, there seems to be nothing that can be done to fix this issue outside of rebuilding the PC which is a massive pandoras box I don't want to enter with this user. --- Update ---- Malware scans from multiple products have been run on the machine and all updates were installed. The real problem with this user is his distance from us, there is no way to supply a spare laptop or rebuild the machine currently.

  Read the article

• Tool to modify properties/metadata of a PDF? i.e. Change "Title", "Author"? Sony Reader showing som

  - by Chris W. Rea

  I own a Sony Reader PRS-600 ebook reader. I bought a ton of Manning Publications ebooks (DRM-free) recently. Many of the books are PDFs since not all the ones I wanted are available in epub format. The problem: Some of the PDF books I purchased have incorrect or missing metadata. Making things worse, the Sony Reader only displays the "Title" from the PDF metadata when displaying book titles in the reader's collection of books! The Reader doesn't display the filename. So, even though I have a PDF informatively named "Windows PowerShell In Action.pdf", it shows up as "untitled" in the Reader. Imagine how useful the Reader's list of book titles becomes when many are just "untitled" or "unnamed document" ! Yes, it is maddening. So – short of expecting the publisher to fix the files or Sony to add a filename-based list instead, I'm looking for a way to fix the PDF metadata. I can view the metadata with Adobe Reader, but it doesn't permit modification of the properties. Leading to: Question: Is there a tool – free, or cheap – and either for PC or Mac, that can modify the properties / metadata of a DRM-free PDF document? I want to correct "Title" and "Author" fields, specifically.

  Read the article

• Routing a single request through multiple nginx backend apps

  - by Jonathan Oliver

  I wanted to get an idea if anything like the following scenario was possible: Nginx handles a request and routes it to some kind of authentication application where cookies and/or other kinds of security identifiers are interpreted and verified. The app perhaps makes a few additions to the request (appending authenticated headers). Failing authentication returns an HTTP 401. Nginx then takes the request and routes it through an authorization application which determines, based upon identity and the HTTP verb (put, delete, get, etc.) and URL in question, whether the actor/agent/user has permission to performed the intended action. Perhaps the authorization application modifies the request somewhat by appending another header, for example. Failing authorization returns 403. (Wash, rinse, repeat the proxy pattern for any number of services that want to participate in the request in some fashion.) Finally, Nginx routes the request into the actual application code where the request is inspected and the requested operations are executed according to the URL in question and where the identity of the user can be captured and understood by the application by looking at the altered HTTP request. Ideally, Nginx could do this natively or with a plugin. Any ideas? The alternative that I've considered is having Nginx hand off the initial request to the authentication application and then have this application proxy the request back through to Nginx (whether on the same box or another box). I know there are a number of applications frameworks (Django, RoR, etc.) that can do a lot of this stuff "in process", but I was trying to make things a little more generic and self contained where different applications could "hook" the HTTP pipeline of Nginx and then participate in, short circuit, and even modify the request accordingly. If Nginx can't do this, is anyone aware of other web servers that will perform in the manner described above?

  Read the article

• Can one really fry a monitor by setting the wrong HorizSync and VertRefresh?

  - by rumtscho

  I've encountered this problem on several different systems with several different monitors: a monitor functions perfectly under Windows. I install a Linux and the max resolution is at some impossibly low value, mostly 640x480, changing it in Xorg.conf doesn't work. The X.org log file then shows that the driver cannot determine the correct refresh rate for the monitor, so it ignores everything in Xorg.conf and just loads in some default minimalistic mode. Googling the problem leads to an easy solution: set the HorizSync and VertRefresh in Xorg.conf, and everything works. The problem seems to be a common one, and I've seen dozens of results recommending the solution. Each of them contains the warning that you should use the value ranges provided with the monitor. Because if you don't, and your video card sends a signal with the wrong refresh rate, this can damage your monitor. Of course, you don't have a user manual for your monitor any more. If you are lucky to find one on the attic or on the net, it doesn't contain any information about the supported refresh rate. So you just type in the value suggested in the solution description, which varies wildly depending on your source, and cross your fingers. You restart, and... ... you've set the wrong values. So the monitor shows a short message like "input signal out of range", and you do a hard restart, repair your Xorg.conf in recovery mode, and everything is fine, including your monitor. So does this warning reflect a real possibility, or is it just a geeky urban legend? Or is it something which used to happen in the past, before manufacturers started protecting the monitors against it? Is it technically possible with every monitor technology, or is it maybe something which can only happen to a CRT? If you think that it's true, why? Have you ever witnessed a monitor die from the wrong refresh config, or have you read of it in a reputable source?

  Read the article

• Don't break header/footer when making page landscape format

  - by Steeven

  I have a document with a footer with page numbering and a header with some centered text. Long story short: I flipped one page to landscape format. Long story long: I made a forced page break to get a blank page. I then highlighted this page (that is, I highlighted the empty line on this page) and went to the page proporties menu window, clicked on the landscape format button, and chose to apply this setting for the highlighted text only. The result: All that is of course no big deal, and my page is flipped the 90 degrees as wished - but my header and footer break! They disappear from this page... and actually also from the next page (which is still upright portrait format), which is weird. And then the header and footer is back on the following pages again, though the page numbering restarts from 1. On this screenshot you can see that the previous and the following pages have headers and footers, but not the flipped one and not the page following the flipped one. What just happened here? How can I make the page numbering continue without restarting first of all, and then, how can I keep the header and footer on at least the upright page, that suddenly doesn't have them?

  Read the article

• SSD cache to minimize HDD spin-up time?

  - by sirprize

  short version first: I'm looking for Linux compatible software which is able to transparently cache HDD writes using an SSD. However, I only want to spin up the HDD once or twice a day (to write the cached data to the HDD). The rest of the time, the HDD should not be spinning due to noise concerns. Now the longer version: I have built a completely silent computer running Xubuntu. It has a A10-6700T APU, huge fanless cooler, fanless PSU, SSD. The problem is: it also has (and needs) a noisy HDD and I want to forbid spinning it up during the night. All writes should be cached on the SSD, reads are not needed in the night. Throughout every day, this computer will automatically download about 5 GB of data which will be retained for about a year, giving a total needed disk capacity of slightly less than 2 TB. This data is currently stored on a 3 TB noisy hard disk drive which is spinning day and night. Sometimes, I'll need to access some data from several months ago. However, most times I'll only need data from the last 14 days, which would fit on the SSD. Ideally, I'd like a transparent solution (all data on one filesystem) which caches all writes to the SSD, writing to the HDD only once a day. Reads would be served by the cache if they were still on the SDD, else the HDD would have to spin up. I have tried bcache without much success (using cache_mode=writeback, writeback_running=0, writeback_delay=86400, sequential_cutoff=0, congested_write_threshold_us=0 - anything missing?) and I read about ZFS ZIL/L2ARC but I'm not sure I can achieve my goal with ZFS. Any pointers? If all else fails, I will simply use some scripts to automatically copy files over to the big drive while deleting the oldest files from the SSD.

  Read the article

• Active directory Kerberos OSX problems

  - by Temotodochi

  I'll try to keep this short, but informative. I'm currently unable to bind OSX lion (10.7.4) machines to our AD. OSX kerberos (heimdal) is unable to locate the KDC service. However i can bind linux & windows machines to the AD without any problems in the same network AD controls the domain DNS and all the relevant _kerberos._tcp.x.domain.com and _kpasswd SRV DNS records are there and resolve fine when tried from OSX machines. Defined ports are open for service and manually accessible from OSX. When i try kinit in the OSX, i can get the first auth through (wrong passwords fail instantly), but when supplied with correct password, kinit fails after some waiting with "unable to reach KDC". All machines run NTP and have correct time. During testing, network is not firewalled between the machines Linux and windows machines have no problems whatsoever I have tried with and without /etc/krb5.conf - OSX by default does not need it in the krb5.conf i used a working config from one of our linux machines. dsconfigad fails with simple "connection failed to the directory server" I'm a bit baffled with this. OSX is like the KDC is nowhere to be found and at the same time my test machines with windows 7 and some linux (centos 6 & debian 6) machines have no problems whatsoever. Same network, same configurations. I'm missing some vital piece of configuration somewhere, and i can't find out what it is.

  Read the article

• Windows Server 2008 R2 RAS VPN: access server on internal interface ip

  - by Mathias

  short question: I'm usually a linux admin but need to setup a Win2k8 R2 server for a student project. The server is running as VM on a root server and has a public internet IP assigned. Additionally I need a VPN server to access some services running on the server. I managed to set up a working VPN gateway via the Routing and RAS service which assigns clients an IP in the private subnet 192.168.88.0/24 with the Interface "Internal" listening on 192.168.88.1. Additionally I set up the external interface as NAT interface. So I can connect to the VPN server, get an IP assigned and the server additionally does NAT and I can access the internet over the VPN connection. The only thing I additionally need, is that I can access the server itself over that internal IP (e.g. client 192.168.88.2, server 192.168.88.1) as I want to access some services which I don't like to expose to the internet and restrict them to connected VPN clients. Does anybody have a hint, which configuration I'm missing here to be able to access the server over the VPN connection? EDIT: VPN clients get assigned the IP from the private subnet with subnetmask 255.255.255.255, I guess that might be the reason I can't access the server on the private IP address although it's in the same network range. Any ideas how to change this? I defined a static address pool in the Routing and RAS service, but I can't change the netmask there. EDIT2: I can't access the server from the client, but I can fully access the client from the server (ping, HTTP). I guess it has to do with firewall configuration. Thanks in advance, Mathias

  Read the article

• Windows Server 2008 R2 RAS VPN: access server on internal interface ip

  - by Mathias

  Hey, short question: I'm usually a linux admin but need to setup a Win2k8 R2 server for a student project. The server is running as VM on a root server and has a public internet IP assigned. Additionally I need a VPN server to access some services running on the server. I managed to set up a working VPN gateway via the Routing and RAS service which assigns clients an IP in the private subnet 192.168.88.0/24 with the Interface "Internal" listening on 192.168.88.1. Additionally I set up the external interface as NAT interface. So I can connect to the VPN server, get an IP assigned and the server additionally does NAT and I can access the internet over the VPN connection. The only thing I additionally need, is that I can access the server itself over that internal IP (e.g. client 192.168.88.2, server 192.168.88.1) as I want to access some services which I don't like to expose to the internet and restrict them to connected VPN clients. Does anybody have a hint, which configuration I'm missing here to be able to access the server over the VPN connection? EDIT: VPN clients get assigned the IP from the private subnet with subnetmask 255.255.255.255, I guess that might be the reason I can't access the server on the private IP address although it's in the same network range. Any ideas how to change this? I defined a static address pool in the Routing and RAS service, but I can't change the netmask there. EDIT2: I can't access the server from the client, but I can fully access the client from the server (ping, HTTP). I guess it has to do with firewall configuration. Thanks in advance, Mathias

  Read the article

• Will just a couple of thermal "trip" shutdowns typically damage a CPU?

  - by T.J. Crowder

  The short version If a CPU gets so hot that the system turns itself off because of a thermal trip signal just a couple of times, is it likely that the CPU will be damaged? Or does the trip do its job, turning it off before the CPU gets damaged? (This is with all default settings in the BIOS; I haven't raised any temp thresholds or overclocked anything.) The longer version I just got this Intel Atom D510-based fanless system, installed a 2.5" mobile SATA drive and two 2GB PC2-6400s, closed it up, and having checked everything was recognized in the BIOS, set about installing Ubuntu. After a couple of false starts related, I think, to the external DVD drive I was using, I got the install happily running along. About three-fourths or so of the way through the install, having been running less than an hour, the machine turned itself off. I was actually out of the room at the time, but when I came back and turned it back on, it said it had shut down due to a thermal event. I went into the BIOS and saw that (at that point, having just been turned back on after a couple of minutes off), it was running 87C. As near as I can tell from Intel's docs (PDF here), the max "junction" temperature for the CPU is 100C and it will raise a THERMTRIP signal at 125C. Yowsa. Presumably there will be some back-and-forth with the vendor on this, I'm just wondering whether letting it get that hot a couple of times is likely to end up damaging it.

  Read the article

• How can I make Cygwin open a new window each time I use a Window 7 keyboard shortcut?

  - by Michael Gundlach

  [Update: The short answer is, if an application in the 3rd thing on your taskbar, press WindowsKey+Shift+3 to open a new instance. Hooray!] I have Chrome and Cygwin on my taskbar. Chrome's shortcut is Ctrl-Alt-C (as set through right clicking the icon and putting Ctrl-Alt-C into Chrome - Properties - Shortcut Key). Cygwin's shortcut is Ctrl-Alt-T. When I press Ctrl-Alt-C, I get a new Chrome window. Great! It's as if I had shift-clicked on the Chrome icon. When I press Ctrl-Alt-T, I get a Cygwin window the first time, but after that I just get focused on the Cygwin window. As if I had simply clicked on the Cygwin icon and not shift-clicked. As if Cygwin wasn't able to have more than one instance open. I can still shift-click the icon to get more instances. I've tried with different keys than Ctrl-Alt-T and got the same behavior. Strangely, I've twice managed to get it into a state (via just clearing and setting the shortcut key over and over) where a shortcut WOULD open multiple instances -- but it was Ctrl-Alt-G both times, which doesn't make sense to my brain which has been trained to use Ctrl-Alt-T for years. Ctrl-Alt-G usually behaves just as poorly as Ctrl-Alt-T, except for the two times when magically it started behaving properly. So I'm thinking this is a Windows 7 bug (which has existed since Windows XP at least), but I'm hoping someone knows something I don't :)

  Read the article

• Will restoring a cPanel account delete irrelevant mysql databases?

  - by user54625

  Long story short: I have many accounts in WHM, many domains. However, most of the MySQL databases for all the sites were created under one user, "admin" (let's say it's admin.com). I recently moved the admin.com account to another web server , and now I need to move it back. I would like to restore this account from a backup made by that web server. However, it only has 3 databases attached to that domain, while the server I'm moving it to has those 3 databases (old DBs that need to be replaced), PLUS all the other databases which are used by other accounts on the server. My question: if I restore the admin.com account, will it delete all the other databases on the account, or will it only replace the 3 DBs it has? I can't take any chances here to delete all those other DBs... If it WOULD delete all those other accounts, how would I go about restoring this account without losing the other data? An easy to way to resolve this situation would be to move the mysql owners to the proper accounts, but alas it doesn't seem that there is a way to do that via WHM.

  Read the article

• Port Forwarding(?) TD-W8961nd

  - by rich

  I have a bit of a weird internet setup. I am connected via a decent WiFi connection (from work) which I pick up using a Buffalo Airstation Wireless-G box. This simply picks up the signal and gives me 4 ethernet ports to connect to. That's all fine and works as it should. I also have a TP LINK TD-W8961nd router which used to be connected to the Airstation via an ethernet cable so I could essentially have WiFi access in my house. To cut a long story short I can't remember how the hell I got it to work and I can't find the notes I scribbled down on how to do it. I'm pretty sure I need to tell the router what ip to pick up the internet connection from and have the local wifi as a seperate network. How the hell I do that I have no idea right now. Can anyone give me some advice on this? If you need more information ask and I will be able to do so. Cheers in advance. edit I'm in work at the moment so I can't give 100% details but I will be able to later on.

  Read the article

• Swapping Function (Fn) and Control (Ctrl) Keys on Lenovo ThinkPad W500

  - by Howiecamp

  I'd like to swap the Fn and Ctrl keys on my ThinkPad W500 (like many others!). I wanted to comment on http://superuser.com/questions/35228/how-can-i-switch-the-function-and-control-keys-on-my-laptop and StackOverflow question 514781 (please Google it because I don't have enough rep to include 2 hyperlinks) but I don't have enough rep to do so to comment. Numerous folks (in both the above questions and on other Google searches) indicate that Windows doesn't register the Fn key as a keypress but using a tool that gives the ASCII value of a keypress (visit www mihov com / eng / am.html) I see the Fn key returning FF (perhaps FF in this case means 'not registered'). I also see that keys like Ctrl register with one ASCII code when pressed alone and another when pressed in combo with another key. Fn will only register when pressed alone, so Windows definitely isn't seeing the combo. This took a solution like AutoHotKey off the table. I ran KeyTweak (which shows you the hardware scan codes of a keypress and the Fn key registerd as 57443). Using this program I remapped Fn to the Ctrl key; this worked perfectly. However, I suspect that because of the issue in #1, the combo of, for example, Fn + C did not execute a copy. Short of retraining my pinky I'm actually considering removing the keyboard and resoldering the connections to swap those keys. I'd love to get some input as to the root technical issue(s) and possible solutions here. Thanks

  Read the article

• transparently proxying a firewalled web application from a non-standard port to port 80

  - by Terrence Brannon

  I have a web application that serves on port 8088 on $server. However, the only port accessible from remote on $server is port 80. Furthermore, only CGI programs can execute on port 80. I would like to write a CGI program accessible via port 80 that allows one to use the web app running on port 8088. From my view, an ideal solution would be some sort of Java web browser that simply opened up a window and allowed me to use the program running on that port. The CGI program would simply initiate a web browser applet or something. I wrote a Perl CGI program that does it, but I really would like a more transparent solution: my $q = new CGI; print $q->header; use LWP::Simple; use HTML::Tree; my $base = "http://localhost:8088"; my $request = $base; my $qurl = $q->param('url'); if (length($qurl) > 1) { warn "long $qurl"; $request = "$base$qurl"; } else { warn "short $qurl"; } my $content = get($request); my $tree = HTML::TreeBuilder->new_from_content($content); my @a = $tree->look_down('_tag' => 'a'); for my $a (@a) { my $url = $a->attr('href'); next if index($url, '#') > -1 ; $url = "?url=$url"; $a->attr(href => $url); } print $tree->as_HTML;

  Read the article

• DD-WRT (WRT54G) and (THOMSON TG782) how to put them togather?

  - by FeRtoll

  Ok so let me explain, i bought WRT54G and successfully installed DD-WRT v24-sp1 (07/26/08) mini-special - build 9994. That's all ok no problems with it all normal functioning. And just to add (i don't need wireless, wireless is turned off always) What i want: ISP's router (TG782) from it's INTERNET port(out) cable "which was before in my pc" is connected to WRT54G's INTERNET port and then from WRT54G LAN port 1 to my pc. The problem: How do i connect and setup all? I have tried many times on many different ways but cant get it to work IF THE CABLE FROM TG782 IS CONNECTED TO WRT54G ON INTERNET PORT. If i connect the TG782 to Lan port 1 on WRT54G and my pc to lan port 2 then all works fine after i setup gateway and all. But i want to connect TG782 to Internet port of WRT54G because i need "Access Restrictions" and this only goes through WAN right? please correct me if i am wrong. What i have tried: This is how i have tried to setup all. The TG782 router ip is 192.168.1.1 And WRT54G ip is 192.168.1.30 so in WRT54G control panel i have setup like this: ----WAN Connection Type---- Connection Type: Automatic Configuration - DHCP STP: Disabled ----Router IP---- Local IP Address: 192.168.1.30 Subnet Mask: 255.255.255.0 Gateway: 192.168.1.1 (the TG782) ----Network Address Server Settings (DHCP)---- DHCP Type: DHCP Server Start IP Address: 192.168.1.100 Maximum DHCP Users: 6 And this wont work i probably miss something more, if anyone can help i would be thankfull. Also i have to note that i have tried to set my network adapter on pc to use the gateway of WRT54G and ip 192.168.1.102 In short: i cant get it to work normal only as a switch! Thanks for any help! -------EDIT:------- Here is an image which maybe can help: http://img27.imageshack.us/img27/4227/allin1w.jpg

  Read the article

• Win2k8R2 / IIS 7.5 - users getting 503 response, no 503 error reported in logs

  - by merk

  I've got 2 web servers with mirrored content. There's a load balancer sitting in front of them. Starting yesterday we've been getting people complaining about 503 errors. i can't find any 503 errors in the IIS log file. However the server host is saying these errors are due to .Net errors in our website which are causing the app pool to recycle. They pointed out several errors in the windows application event log which look like this: Log Name: Application Source: ASP.NET 4.0.30319.0 Date: 3/31/2012 8:35:37 PM Event ID: 1309 Task Category: Web Event Level: Warning Keywords: Classic User: N/A Computer: 6251.local Description: Event code: 3005 Event message: An unhandled exception has occurred. Event time: 3/31/2012 8:35:37 PM Event time (UTC): 4/1/2012 1:35:37 AM Event ID: e7a580c7b38545cca3416a8595408f24 Event sequence: 97 Event occurrence: 1 Event detail code: 0 Application information: Application domain: /LM/W3SVC/2/ROOT-1-129777167518960645 Trust level: Full Application Virtual Path: / Application Path: C:\inetpub\wwwroot\mywebsite\ Machine name: 6252 Process information: Process ID: 20000 Process name: w3wp.exe Account name: IIS APPPOOL\MyAppPool In particular they are saying that the account name under Process Information indicates that the app pool is recycling. They said if the app pool were not recycle, the accountname would instead be the folder where the website files are located. I checked the app pool settings - it's set to recycle every 29 hours. And the rapid fail protection is set to the default of 5 failures in 5 minutes. But i have not seen 5 failures in the event log in that short of a time span. Can anyone help me confirm if the 503 responses are indeed being generated by the app pools recycling? Or are these errors coming from somewhere else? My guess at the time was their load balancer was the one actually returning the 503 error. But that was just a guess.

  Read the article

• creating metapackages

  - by olpanis

  got some problems while creating metapackages tried to create a meta package containing forensic toolkits, on ubuntu i even got problems creating an .deb file. dpkg-source: error: can't build with source format '3.0 (quilt)': no orig.tar file found dpkg-buildpackage: error: dpkg-source -b forensics-0.1 gave error exit status 255 later i tried it using debian 5, creating the deb works, but there i got into some problems with Depends debian:/home/matthias/Desktop/meta# dpkg --install *.deb Wähle vormals abgewähltes Paket meta. (Lese Datenbank ... 96897 Dateien und Verzeichnisse sind derzeit installiert.) Entpacke meta (aus meta_0.1-1_i386.deb) ... dpkg: Abhängigkeitsprobleme verhindern Konfiguration von meta: meta hängt ab von python (>= 2.6.6-2); aber: Version von python auf dem System ist 2.5.2-3. dpkg: Fehler beim Bearbeiten von meta (--install): Abhängigkeitsprobleme - lasse es unkonfiguriert Fehler traten auf beim Bearbeiten von: meta the file control looks like this: Source: meta Section: unknown Priority: extra Maintainer: root <[email protected]> Build-Depends: debhelper (>= 7) Standards-Version: 3.7.3 Homepage: <insert the upstream URL, if relevant> Package: meta Architecture: any Depends: python (>= 2.6.6-2) Description: short description forensic toolkits any ideas? kind regards

  Read the article

• Concerns about Apache per-Vhost logging setup

  - by etienne

  I'm both senior developer and sysadmin in my company, so i'm trying to deal with the needs of both activities. I've set up our apache box, wich deals with 30-50 domains atm (and hopefully will grow larger) and hosts both production and development sites, with this directory structure: domains/ domains/domain.ext/ #FTPS chroot for user domain.ext domains/domain.ext/public #the DocumentRoot of http://domain.ext domains/domain.ext/logs domains/domain.ext/subdomains/sub.domain.ext domains/domain.ext/subdomains/sub.domain.ext/public #DocumentRoot of http://sub.domain.ext Each domain.ext Vhost runs with his dedicated user and group via mpm-itk, umask being 027, and the logs are stored via a piped sudo command, like this: ErrorLog "| /usr/bin/sudo -u nobody -g domain.ext tee -a domains/domain.ext/logs/sub.domain.ext_error.log" CustomLog "| /usr/bin/sudo -u nobody -g domain.ext tee -a domains/domain.ext/logs/sub.domain.ext_access.log" combined Now, i've read a lot about not letting the logs out of a very restricted directory, but the developers often need to give a quick look to a particular subdomain error log, and i don't really want to give them admin rights to look into /var/logs. Having them available into the ftp account is REALLY handy during development stages. Do you think this setup is viable and safe enough? To me it is apparently looking good, but i'm concerned about 3 security issues: -is the sudo pipe enough to deal with symlink exploits? Any catches i'm missing? -log dos: logs are in the same partition of all domains. got hundreds of gigs, but still, if one get disk-space dos'd, everything will break. Any workaround? Will a short timed logrotate suffice? -file descriptors limits: AFAIK the default limit for Apache on Ubuntu Server is currently 8192, which should be plenty enough to handle 2 log files per subdomain. Is it? Am i missing something? I hope to read some thoughts on the matter!

  Read the article

• IIS 7.5 FTP Service crashes after installation of Advanced Logging 1.0 Module

  - by Jeremy

  I've recently been tasked with setting up two new productions servers for an ASP.Net application. The servers sit behind a F5 Load Balancer, which in turn forwards the end users IP address forward via the standard X_Forwarded_For HTTP Header. All of the reading that I have done suggests that I need to install the IIS Advanced Logging Module in order to take advantage of the X_Forwarded_For HTTP Header. Some quick background: Both of the web servers are Windows 2008 R2 Standard (x64), with IIS 7.5 installed and configured. The FTP Role has also been installed, configured and is operational. The Issue After installing the IIS Advanced Logging module via the Web Platform Installer, I noticed the following Error in the Event Viewer: The FTP Service encountered an error trying to read configuration data from file \?\C:\Windows\system32\inetsrv\config\applicationHost.config, line number 374. The error message is: Unrecognized element 'advancedLogging' Trying to connect over FTP to either of the web servers results in a 530. I've spent 2 hours scouring Google trying to find a solution, short of uninstalling the Advanced Logging Module. As far as I can tell, there is no way to turn off Advanced Logging on a site per site basis. Help would be appreciated.

  Read the article

• AWS Linux EC2: yum won't run with plugins

  - by Patrick

  Short Version: yum commands on my Amazon Linux EC2 AMI only work with --noplugins. Long Version: A couple of days ago, I ran yum update at the behest of the SSH Login MoTD telling me I had updates to install. About midway through the update (specifically while updating the kernel), the update abruptly ended (79 of 138 items completed). The website I host on EC2 got weird for a few minutes, but eventually seemed to stabilize back out (maybe EC2 restarted itself?), and I didn't have further issues (other than MySQL started running out of memory, but I think that's probably unrelated to this). Today, I went to install gcc-c++ (with yum install gcc-c++). When I did, I got the following message: Loaded plugins: priorities, security, update-motd, upgrade-helper Config error: Command "updateinfo" already defined and I get that for any command I can think to run using yum. However, If I throw in the --noplugins flag, then magically it seems to work. To be clear, when I installed a different package a week ago, it worked totally correctly, so the yum update is the only thing I can think of that changed. I could find nothing on Google with regard to "updateinfo" already defined (with and without quotes). I tried running yum update --noplugins which spit out a message telling me that I should have run yum-complete-transaction instead, but proceeded to try to update something on its own. When that completed, I tried yum-complete-transaction but that gave me a message about the transactions not lining up correctly, so it removed the old transaction (Probably since I should have completed the first transaction before trying to update again, if I had known). Based on the SF question "Linux EC2 Broken Yum", I've also tried yum clean all --noplugins (fails the same with plugins) which just gives me Cleaning repos: amzn-main amzn-updates rpmforge Cleaning up everything I also tried package-cleanup --problems Loaded plugins: priorities, update-motd, upgrade-helper No Problems Found and package-cleanup --dupes Gives a lot of dupes, so I pasted them here: http://pastebin.com/VVFQEkTT instead of inline. At this point, I'm not sure what else there even is to check.

  Read the article

< Previous Page | 209 210 211 212 213 214 215 216 217 218 219 220  | Next Page >