Search Results

Search found 7902 results on 317 pages for 'dev er dev'.

Page 214/317 | < Previous Page | 210 211 212 213 214 215 216 217 218 219 220 221  | Next Page >

• Lost Page Write I/O Errors on CentOS LVM setup

  - by Gregg Leventhal

  I have a CentOS 6 box with LVM setup and one of the PVs is a USB disk (I know). One of them is getting the error: Oct 30 10:57:07 alpha01 kernel: lost page write due to I/O error on dm-3 Oct 30 10:57:07 alpha01 kernel: Buffer I/O error on device dm-3, logical block 4 Which is causing problems with all of the LVs on it. pvs shows the PV as unknown device. I can ls to the logical volumes and they show up in lvdisplay, but first I get a bunch of IO errors. I made sure the cables are secure between the USB drive. What should I do to get this back up and running for the meanwhile? Should I unmount each LV and run an fsck.ext4 on each one like fsck.ext4 -y /dev/vg1/lv_logvolname ?

  Read the article

• Is it better to check if file exists before deleting it

  - by Kevin Fegan

  Sometimes when I want to delete a file (from within a script), I will just delete it rather than checking if it exists first. So I do this: $ rm "temp.txt" 2>/dev/null Instead of this: [ -f "temp.txt" ] && rm "temp.txt" I just feel it's a waste of time to go and check if the file exists and return an exit code. So, perhaps it's quicker to do it the first way, especially if most of the time, the file is likely to be present. Are there any other advantages (or downsides) to do it one way or the other? Am I wrong to think it will ever be quicker?

  Read the article

• Kickstart Partitioning Configuration

  - by Flo

  I'be been trying to run a kickstart script with the following partition configuration: #Clear the masterboot record zerombr bootloader --location=mbr --driveorder=sda --append=" rhgb crashkernel=auto quiet" # Set up the partitions/logical volumes/logical groups clearpart --all part /boot --fstype=ext4 --asprimary --size=512 --ondisk=sda part swap --size=2048 --fstype=swap --ondisk=sda part pv.01 --fstype=ext4 --grow --size=200 --ondisk=sda part pv.02 --fstype=ext4 --grow --size=200 --ondisk=sdb volgroup VolGroup pv.01 pv.02 --pesize=32768 logvol /opt --fstype=ext4 --name=opt.fs --vgname=VolGroup --size=40000 logvol / --fstype=ext4 --name=root.fs --vgname=VolGroup --size=78000 I have two hard drives and it looks to me like its a really simple configuration. When I run the kickstart I keep getting all these errors that have to do with python files for configuring partitions. The only actual maybe useful piece of information is KeyError /dev/sda/ I tried a number of alterations of this configuration but nothing really worked. Any ideas?

  Read the article

• X58 RAID 10 - Am I forced to use Sata2?

  - by Avi

  I'm building a new dev computer. It will be running a few VMWare Worksation virtual machines. I was advised on Serverfault to use Raid10 for performance. Raid 10 uses 4 disks. I contacted my supplier who suggested a gigabyte X58A motherboard and 4 Western Digital Caviar black 6Gb/s disks. I have checked the spec for the X58A board, however, and it says: SATA 3Gb/s: RAID 0, RAID 1, RAID 5, and RAID 10 SATA 6Gb/s: RAID 0, and RAID 1. I'm losing half the bandwidth because I'm forced to use SATA2! What should I do?

  Read the article

• scp -q isn't quiet between different hosts

  - by pythonic metaphor

  So scp -q file host:file and scp -q host:file file are both quiet, i.e. don't give the progress meter. But when I run scp -q host1:file host2:file, I still get the progress meter as well as a Connection to host1 closed. message. The progress meter can be gotten rid of by redirected stdout to /dev/null (although I'd rather not have to), but the connection closed messages comes on stderr, which I definitely want to keep in case there's a real error. How can I make scp quiet? Do I have to run ssh host1 "scp -q file host2:file"?

  Read the article

• solaris + EMC + power-path

  - by yael

  please advice - when I run powercf command on my Solaris machine , which changes this command do on the EMC storage , or on Solaris file system ? from maanual page: DESCRIPTION During system boot on Solaris hosts, the powercf utility configures PowerPath devices by scanning the HBAs for both single-ported and multiported storage system logical dev- ices. (A multiported logical device shows up on two or more HBAs with the same storage system subsystem/device identity. The identity comes from the serial number for the logical device.) For each storage system logical device found in the scan of the HBAs, powercf creates a corresponding emcpower device entry in the emcp.conf file, and it saves a primary path and an alternate primary path to that device.

  Read the article

• Xen P2V for large physical hosts with much free space

  - by Sirex

  I need to P2V a rhel5 machine to xen under rhel5. I know I can use dd if=/dev/sda then using virt-install --import on the host, but the downside of this is the original machine has 80% free space on its drive. Does anyone know of (or can document) a quick and easy method which works reliably, to produce a bootable xen image which can run under a hvm in such cases ? I tried clonezilla to make the image, to avoid the free space problem, but it failed to do the clone with "something went wrong" (useless info, i know). At the moment im looking at doing a dd of each partition, and a file level copy of the partition which is mostly empty, then creating a new virtual disk, copying the partitions over to it by mounting both the new image and the virtual drive on a second vm, then copying the boot sectors over, then copying the file level backup..... there must be an easier way ? Oh, and budget is $0. :)

  Read the article

• Cloning OpenVZ container

  - by Tiffany Walker

  I have an OpenVZ container on 1 host and I would like to clone it over to my server. both run SolusVM. I only have root access to my server and would like to host the container on my server now. Can I use rsync to clone the drive while the OS is running on both? Using a command like this: rsync -uazPx --exclude='/boot' --exclude='/proc' --exclude='/dev' --exclude='/lib' --exclude='/tmp' --exclude='/var/lock' / [email protected]:/ Is there any other areas I should probably not copy over?

  Read the article

• Xen Disk Performence Issues

  - by user98651

  I'm currently using Xen PV on CentOS 5 with my domU's as flat files running on a hardware RAID controlled (write cache enabled) formatted with XFS. On the dom0 I can get about 500MB/s in a 2GB dd write from /dev/zero however on the domU's I'm lucky if I get 10MB/s (it is usually around half that). I've tried changing the disk scheduling to NOOP on the domU's, changed some mount parameters and tweaked the performance allocations of both the dom0 (prioritize CPU) and domU's (increase RAM and VCPU allocations). None of these steps have produced any noticeable change in performance. My instinct here is that it is not a hardware problem, due to the solid performance of the dom0. Any ideas on what might be causing this problem? I'm considering moving to LVM based domU's.

  Read the article

• Crontab - stop sending mail, special case ||

  - by 2ge

  Hi all, I need to put into my crontab small command, which is checking, if lighttpd web server is running, for some reason it hangups sometimes. So I got there: * * * * * root /bin/pgrep lighttpd || /usr/local/etc/rc.d/lighttpd restart >/dev/null 2>&1 problem is, this send me mail every minute, in the mail is number of PID of lighttpd, which is running. For other crontab job, redirection work, so I assume, when is there "||", it makes problem. maybe there should be better to rewrite crontab job, so it uses exit status of pgrep, so I can avoid "||". I am using FreeBSD. Thanks for any help, for now I disabled this job

  Read the article

• OpenVPN IPv6 over IPv4 tunnel

  - by user66779

  Today I installed OpenVPN 2.3rc2 on both my windows 7 client machine and centos 6 server. This new version of OpenVPN provides full compatibility for IPv6. The Problem: I am currently able to connect to the server (through the IPv4 tunnel) and ping the IPv6 address which is assigned to my client and I can also ping the tun0 interface on the server. However, I cannot browse to any IPv6 websites. My vps provider has given me this: 2607:f840:0044:0022:0000:0000:0000:0000/64 is routed to this server (2607:f840:0:3f:0:0:0:eda). This is ifconfig after setup with OpenVPN running: eth0 Link encap:Ethernet HWaddr 00:16:3E:12:77:54 inet addr:208.111.39.160 Bcast:208.111.39.255 Mask:255.255.255.0 inet6 addr: 2607:f740:0:3f::eda/64 Scope:Global inet6 addr: fe80::216:3eff:fe12:7754/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2317253 errors:0 dropped:7263 overruns:0 frame:0 TX packets:1977414 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1696120096 (1.5 GiB) TX bytes:1735352992 (1.6 GiB) Interrupt:29 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.8.0.1 P-t-P:10.8.0.2 Mask:255.255.255.255 inet6 addr: 2607:f740:44:22::1/64 Scope:Global UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:739567 errors:0 dropped:0 overruns:0 frame:0 TX packets:1218240 errors:0 dropped:1542 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:46512557 (44.3 MiB) TX bytes:1559930874 (1.4 GiB) So OpenVPN is sucessfully creating a tun0 interface and assigning clients IPv6 addresses using 2607:f840:44:22::/64. The first client to connect is getting 2607:f840:44:22::1000 and the second 2607:f840:44:22::1001, and so on... plus 1 each time. After connecting as the first client, I can ping from my windows client machine 2607:f740:44:22::1 and 2607:f740:44:22::1000. However, I have no access to IPv6 websites. I believe the problem is that the tun0 IPv6 addressees are not being forwarded to the eth0 interface. This is the firewall running on the server: #!/bin/sh # # iptables configuration script # # Flush all current rules from iptables # iptables -F iptables -t nat -F # # Allow SSH connections on tcp port 22 # iptables -A INPUT -i eth0 -p tcp --dport 22 -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 22 -j ACCEPT # # Set access for localhost # iptables -A INPUT -i lo -j ACCEPT # # Accept connections on 1195 for vpn access from client # iptables -A INPUT -i eth0 -p udp --dport 1195 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p udp --sport 1195 -m state --state ESTABLISHED -j ACCEPT # # Apply forwarding for OpenVPN Tunneling # iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A FORWARD -s 10.8.0.0/24 -j ACCEPT iptables -t nat -A POSTROUTING -o eth0 -j SNAT --to 209.111.39.160 iptables -A FORWARD -j REJECT # # Enable forwarding # echo 1 > /proc/sys/net/ipv4/ip_forward # # Set default policies for INPUT, FORWARD and OUTPUT chains # iptables -P INPUT ACCEPT iptables -P FORWARD ACCEPT iptables -P OUTPUT ACCEPT # # IPv6 # IP6TABLES=/sbin/ip6tables $IP6TABLES -F INPUT $IP6TABLES -F FORWARD $IP6TABLES -F OUTPUT echo -n "1" >/proc/sys/net/ipv6/conf/all/forwarding echo -n "1" >/proc/sys/net/ipv6/conf/all/proxy_ndp echo -n "0" >/proc/sys/net/ipv6/conf/all/autoconf echo -n "0" >/proc/sys/net/ipv6/conf/all/accept_ra $IP6TABLES -A INPUT -i eth0 -m state --state ESTABLISHED,RELATED -j ACCEPT $IP6TABLES -A INPUT -i eth0 -p tcp --dport 22 -j ACCEPT $IP6TABLES -A INPUT -i eth0 -p icmpv6 -j ACCEPT $IP6TABLES -P INPUT ACCEPT $IP6TABLES -P FORWARD ACCEPT $IP6TABLES -P OUTPUT ACCEPT Server.conf: server-ipv6 2607:f840:44:22::/64 server 10.8.0.0 255.255.255.0 port 1195 proto udp dev tun ca ca.crt cert server.crt key server.key dh dh2048.pem ifconfig-pool-persist ipp.txt push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 208.67.222.222" push "dhcp-option DNS 208.67.220.220" keepalive 10 60 tls-auth ta.key 0 cipher AES-256-CBC comp-lzo user nobody group nobody persist-key persist-tun status openvpn-status.log log-append openvpn.log verb 5 Client.conf: client dev tun nobind keepalive 10 60 hand-window 15 remote 209.111.39.160 1195 udp persist-key persist-tun ca ca.crt key client1.key cert client1.crt remote-cert-tls server tls-auth ta.key 1 comp-lzo verb 3 cipher AES-256-CBC I'm not sure where I am going wrong, it could be the firewall, or something missing from server or client.conf. This version of OpenVPN was only released yesterday, and there's little info on the internet about how to setup an IPv6 over IPv4 vpn tunnel. I've read the manual for this new version of OpenVPN (parts pertaining to IPv6) and it provides very little info too. Thanks for any help.

  Read the article

• Using SQL Server profiler from 2008 against R2 database

  - by Chris Lively

  On my dev machine I have the management studio tools installed from SQL Server 2008. However, one of the sql server boxes I need to profile against is running R2. Because of this, when I start the profiler and connect to that server all of the templates are gone. If I go to Edit the templates, the R2 server type isn't available as an option. Do I have to upgrade my local toolset to R2 or is there some other way around this? Note, that if I create a template and save it the next time I connect to the server that saved template isn't available.

  Read the article

• Recurring Apache 2.0.52 error on CentOS 4 - 'could not create `rewrite_log_lock`'

  - by warren

  I have been seeing a recurring issue on my web server: [Sun May 16 03:10:19 2010] [crit] (28)No space left on device: mod_rewrite: could not create rewrite_log_lock Configuration Failed [Sun May 16 04:10:05 2010] [crit] (28)No space left on device: mod_rewrite: could not create rewrite_log_lock Configuration Failed [Sun May 16 05:10:04 2010] [crit] (28)No space left on device: mod_rewrite: could not create rewrite_log_lock Configuration Failed [Sun May 16 05:17:13 2010] [crit] (28)No space left on device: mod_rewrite: could not create rewrite_log_lock Configuration Failed So far, the only fix I have found to this when it happens is to reboot my server. This is non-ideal :-\ Restarting httpd does not clear the error. df indicates I have 20+ gigs free, and top and free both report 800+ megs (or 1.2 gigs) > df -h Filesystem Size Used Avail Use% Mounted on /dev/simfs 40G 18G 23G 44% / # > free total used free shared buffers cached Mem: 1474560 300832 1173728 0 0 0 -/+ buffers/cache: 300832 1173728 Any ideas on why this would recur, and how to prevent/fix it?

  Read the article

• SAMBA and Linux ACLs -- "Permission denied" on write to share but file written nevertheless

  - by MCH

  I set up a writable share directory "/home/net/share" with acl like this: sudo mkdir -p "/home/net/share" sudo setfacl -m "u:localuser:rwx,u:remoteuser:rwx,g:users:rwx" "/home/net/share" My /etc/samba/smb.conf looks like this: [global] workgroup = w server string = server security = user load printers = no log file = /var/log/samba/%m.log max log size = 50 dns proxy = no printing = bsd printcap name = /dev/null disable spoolss = yes encrypt passwords = true invalid users = nobody root follow symlinks = yes wide links = yes [share] comment = Writable by localuser and remoteuser path = /home/net/share valid users = remoteuser read only = no public = no printable = no Locally, localuser and remoteuser have user accounts and smbpasswds and can both read, create and delete files in /home/net/share. But when I log on from a different machine (like this: sudo mount -t cifs //server/share mountpoint/ -o username=remoteuser ), I get "Permission denied" both when trying to create directories and files, oddly though, it does create files (not directories!) despite these messages! How can I get this working?

  Read the article

• PHP Runs Very Slow on IIS7. Need Help optimizing our config

  - by Kendor

  Am running a PHP based web app on our Windows 2008 cloud-based server. The app, which runs fine outside of our environment (e.g. a different IIS server), but is VERY slow in our environment. Based on googling this is a relatively common situation. I installed PHP and MySQL via the IIS web deployment method... Here's our setup: Windows 2008 Server Enterprise SP2 (32-bit) Microsoft-IIS/7.0 MySQL client version: mysqlnd 5.0.8-dev - 20102224 $Revision: 321634 $ PHP extension: mysqli Update for IIS 7.0 FastCGI Windows Cache Extension 1.1 for PHP 5.3 I had read elsewhere that ipv6 might be an issue, so I turned this off on the network adapter. The app is using: localhost as its connection Be easy on me, as I'm a bit green about some of these components... Also, rewriting the PHP app or modifying it is NOT an option. I'm reasonably SURE that our config is the issue.

  Read the article

• nginx proxy pass redirects ignore port

  - by Paul

  So I'm setting up a virtual path when pointing at a node.js app in my nginx conf. the relevant section looks like so: location /app { rewrite /app/(.*) /$1 break; proxy_pass http://localhost:3000; proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; } Works great, except that when my node.js app (an express app) calls a redirect. As an example, the dev box is running nginx on port 8080, and so the url's to the root of the node app looks like: http://localhost:8080/app When I call a redirect to '/app' from node, the actual redirect goes to: http://localhost/app

  Read the article

• Linux: Limiting data throughput (pipe) in bytes per second?

  - by sdaau

  Hi all, I was wandering if there is a Linux program that can limit data throughput of a pipe - in actual bytes per second?. From what I gather, applicable for the purposes would be bfr, however, it has been removed from Debian (Removal candidate: bfr) cpipe, however, it seems the lowest resolution it will support is kB/s, meaning that buffer writes can still reach MB/s ([SOLVED] Is there a program to limit terminal pipe speed? - Page 2 - Ubuntu Forums) What I'd want is to be able to specify something like cat example.txt | ratelimit -Bps 100 > /dev/ttyUSB0 ... and actually have a single byte from example.txt sent each 1/100 = 0.01 sec (or 10 ms) to 'output'.. Thanks in advance for any suggestions, Cheers!

  Read the article

• No file sharing between two server 2008 R2 machines.

  - by ProfKaos

  I have just replaced XP with Server 2008 R2 on my test sever, and have been running 2008 R2 on my dev laptop. When my server was still XP, file sharing just worked, but now it just doesn't. I've enabled everything I can about sharing, and I can ping the server by machine name, but if I try an access a share, I get asked for a password. The passowrd dialog assumes a domain for this user, but neither my laptop admin user nor my server admin user can get past this login. What am I doing wrong?

  Read the article

• What would cause a query being ran from SSMS on local box to run slower then from remote box

  - by Racter

  When I run a simply query such as "Select Column1, Column2 from Table A" from within SSMS running on my production SQL Server the results seems to take extremely long (45Min). If I run the same query from my dev system’s SSMS connecting to the production SQL Server the results return within a few seconds (<60sec). One thing I have notices is if the system was just rebooted performance is good for a bit. It is hard to determine a time as I have had it start running slow very quickly after reboot but at most it performed good for 20min and then start acting up. Also, just restarting the SQL service does not resolve the issue or provide a temporary performance boost. Specs for Server are: Windows Server 2003, Enterprise Edition, SP2 4 X Intel Xeon 3.6GHz - 6GB System Memory Active/Active Cluster SQL Server 2005 SP2 (9.0.3239)

  Read the article

• How to remove bad disk from LVM2 with the less data loss on other PVs?

  - by Walkman

  I had a LVM2 volume with two disks. The larger disk became corrupt, so I cant pvmove. What is the best way to remove it from the group to save the most data from the other disk? Here is my pvdisplay output: Couldn't find device with uuid WWeM0m-MLX2-o0da-tf7q-fJJu-eiGl-e7UmM3. --- Physical volume --- PV Name unknown device VG Name media PV Size 1,82 TiB / not usable 1,05 MiB Allocatable yes (but full) PE Size 4,00 MiB Total PE 476932 Free PE 0 Allocated PE 476932 PV UUID WWeM0m-MLX2-o0da-tf7q-fJJu-eiGl-e7UmM3 --- Physical volume --- PV Name /dev/sdb1 VG Name media PV Size 931,51 GiB / not usable 3,19 MiB Allocatable yes (but full) PE Size 4,00 MiB Total PE 238466 Free PE 0 Allocated PE 238466 PV UUID oUhOcR-uYjc-rNTv-LNBm-Z9VY-TJJ5-SYezce So I want to remove the unknown device (not present in the system). Is it possible to do this without a new disk ? The filesystem is ext4.

  Read the article

• Export 1 year of CVS to another repo?

  - by John Dibling

  We have a CVS repo with many years of history. It has become huge and unwieldly, so we would like to split this singe repo in to two repos: The main repo would have 1 year's worth of history, up to and including present day. This is where all dev work would take place. An archive repo would have the complete history, up to the point where the main repo would take over. This would be read-only, and only used to look at historical changes. Given that we are starting with one huge, monolithic CVS repo, is it possible to split it up in this way? How can this be accomplished?

  Read the article

• Maintaining CSS on a pre-built ASP.net website. How can I run this locally on a home linux server?

  - by DavidR

  I was in charge of the css for a website. I sent in my code to a guy who integrates the css with the dev site. Later they decided it would be better for me to have a more direct role in dealing with the css. I've downloaded everything on the ftp but have no idea how to get this set up. I am running an Apache server on a Fedora Linux install. Is there any way I can set up a local testing server so I can test my changes before ftp'ing them back on the site?

  Read the article

• Ubuntu PPTP VPN to Microsoft Server Command Line ONLY

  - by supreme

  I try to setup a VPN Connection from a Ubuntu 12.04 LTS to Microsoft VPN Server (Ubuntu is the Client in this Case), but I only get this error message: .. connection failed! Check the log messages below for information why. Couldn't open the /dev/ppp device: Operation not permitted FATAL: Module ppp_generic not found./usr/sbin/pppd: Sorry - this system lacks PPP kernel support Details you may need: modprobe -v ppp > FATAL: Module ppp not found. uname -r -> 2.6.32-042stab076.8

  Read the article

• How do I start mysqld with options

  - by xiankai

  I need to start up mysqld with command line options as from here: http://dev.mysql.com/doc/refman/5.1/en/server-options.html#option_mysqld_skip-grant-tables I normally do sudo service mysqld start, but passing the option as sudo service mysqld start --skip-grant-tables does not seem to work. Alternatively I have tried starting as a daemon, sudo mysqld_safe --skip-grant-tables & But it seems to terminate too soon: 131101 04:59:57 mysqld_safe Logging to '/var/lib/mysql/vagrant.example.com.err'. 131101 04:59:57 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql 131101 05:00:03 mysqld_safe mysqld from pid file /var/lib/mysql/vagrant.example.com.pid ended My last option seems to specify the option in /etc/my.cnf instead, but is there any way to do it via the command line?

  Read the article

• WGet from one site on a server to another site on the same server

  - by JoshReedSchramm

  Hey all, I've recently been asked to administer a couple ubuntu boxes running web servers. I'm a dev by trade so if this question is fairly noob please forgive. We have about a dozen sites running on this box. 2 of our sites need to talk back and forth over a restful api. Unfortunately we are having issues with the sited connection to each other via wget. When we try and run wget manually from the command line from the server pointing to a site also on that server it hangs and eventually times out. If we do the same thing from outside the server to the same site on the server it works. Is there something that could be preventing sites on the same server from communicating with each other? The same thing happens pinging the site from the server.

  Read the article

< Previous Page | 210 211 212 213 214 215 216 217 218 219 220 221  | Next Page >