Search Results

Search found 9558 results on 383 pages for 'share'.

Page 214/383 | < Previous Page | 210 211 212 213 214 215 216 217 218 219 220 221  | Next Page >

• What is needed for 'Previous Versions' to be visible on the client OS?

  - by Zoredache

  I have servers with Shadow Copies enabled taking snapshots a couple times a day. From the server, if you look at the local devices you can see the Previous Versions being populated reliably. But from remote clients, the ability for an end-user to see the Previous Versions seems to be very hit-or-miss. For the sake of this question you can assume that all my clients are Windows 7 and the Servers are Windows Server 2008 R2. Is there an exhaustive list of everything that is required for end user to see Previous Versions? Are their any requirements for a certain level of share or filesystem permissions, other then read access? Does something need to be open on the firewall, other then what is already in-place for normal Windows networking?

  Read the article

• windows cache not working as it should?

  - by piotrektt

  I run windows 2012 server with data center. The setup is with 60GB of RAM. I have one file shared on VHD and when I copy this file locally the RAM cache is all used up but when multiple computers connect to the share it the cache is not used. The network is 8Gb. The whole network is around 200 computers that need to read that one file but on this setup only 10 connection kills the server. Is there any way to check what is going on? What other solution can I use to manage cache in windows?

  Read the article

• Outlook + Exchange 2007: it is possible to rid of local OST files?

  - by kdl

  I am looking for a solution which would allow to use a convenience of Outlook as a mail client app while at the same time have no PST or OST files on a local computer. Even in 'non-caching' mode Outlook creates an OST file where it downloads everything from the Exchange server. OWA does not create any local files (except cookies I believe) but lacks some of the nice features Outlook has. Would it be feasible to place OST files on a network share? Maybe the solution exists for some other client+server pair?

  Read the article

• VNC-like remote control over home network

  - by Widor

  I'm aware of how to use VNC to share screens or grant remote control of your machine over the internet by using VNC or one of the web-based "go to my pc" type services. If two computers are connected to a router (i.e. standard home network), is there an easier way of viewing and controlling one computer from the other? I'd like to avoid going outside the LAN, onto the internet, then back in if possible. Both machines are Windows XP, but I'm not looking for Remote Desktop by the way.

  Read the article

• Backup of images

  - by Sam Kong

  I've just installed a Ubuntu for a file server. It will share a folder (samba) and employees of my company will save photos on that. Currently the total amount of the photos is about 100GB and every day 20MB will be added. My question is about backup plan. I want to backup the photos to a remote server using a cron job. I can think of 2 things. rsync git Image files won't be changed so rsync will do. But as people say, I must git all my data. What would you do? Thanks. Sam

  Read the article

• Xnest from Mac OSX to HP UX

  - by Burbas

  Hi, I'm trying to connect to my HP/UX machine from Mac OS X using Xnest. The problem is that I can not get the keyboard to work. I can see the login-prompt, but unable to type in my username. The connection is done by: Xnest :1 -query 192.168.0.193 -geometry 1280x1024 and it gives me some errors: (EE) AIGLX error: dlopen of /usr/X11/lib/dri/swrast_dri.so failed (dlopen(/usr/X11/lib/dri/swrast_dri.so, 5): image not found) (EE) GLX: could not load software renderer (EE) XKB: Couldn't open rules file /usr/X11/share/X11/xkb/rules/base (EE) XKB: No components provided for device Virtual core keyboard Couldn't get keyboard. I hope there is someone here who might have the answer :-).

  Read the article

• Prevent folder deletes at top level only on Server 2008

  - by DomoDomo

  I'm trying to prevent folders moves, really folder delete in NTFS parlance, for series of folders within a network share. So let's say I have: FolderA, FolderB, FolderC. Each folder has various files and subfolders. I want the Domain Users group to have modify access to all files and folders beneath FolderA, FolderB, and FolderC. However I don't want them to be able to delete these three top level folders. The issue we are having right now is people keep accidentally dragging one top level folder into another. I've tried used advanced NTFS permissions to deny domain users delete access to these top level folders, and set the permissions to apply to "This folder only", however it seems to only affect sub-folders, and not the top level. Platform is Server 2008 Standard. Thanks in advance.

  Read the article

• Can I make the shift+right-click the default right-click action on tasks in the task menu?

  - by fostandy

  When I right click on a running task in my start menu I usually get 3 options: Launch a new copy of this - I don't use this Pin this program to the taskbar - I don't use this Close window - I use this. Lots. So much so that in Windows XP I used to right click and press 'c'. Which I can no longer do because while it hilights the close MenuItem, it doesn't actually invoke it. If I shift+right-click on the task, I get the old menu upon which I can just hit C. This old menu is also generally much more useful as it has many more options I use considerably more frequently. Is there a way I can make this menu pop up as the default right-click menu? This is also proving to be a real pain to google. As I'm always up for improving my goo-fu, if you do google a fix to this problem I would appreciate it if you could share the keywords/phrases used.

  Read the article

• Cannot access folder locally, but can remotely

  - by Cylindric

  I'm having a peculiar problem on one of my servers at the moment, which seems to be related to authentication in some way, but I have no idea how to find the root of the problem. I have a folder on the server D:\Somefolder\Logs. If I am connected to the server via an RDP terminal, so essentially "local", I cannot access that folder - I get an access denied. If I am connecting from my machine to it using the share \server\d$\Somefolder\Logs, I can access it. I'm logging in to both machines as the same user. Permissions on the folder seem quite simple, CREATOR OWNER, SYSTEM and Administrators. I am a Domain Admin, and they are in the local "Administrators" group. It is also affecting things like access to SQL Server, so I don't think it's a simple folder-permissions thing. For example, I cannot connect SQL Management Studio to all the local SQL instances using a domain account, but I can if I connect remotely to it.

  Read the article

• How to logon to a non-domain computer from one in a domain

  - by Svish

  I've met a rather annoying problem that should be very simple, but I can't seem to figure it out. I have a work laptop that is part of a domain, so my username is foobar\bob. I also have my home computer with no domain, just the username bob. I'm trying to connect to a share on my home computer from my work computer. It's asking me for my username and password, which is bob, but when I type in bob it assumes I mean foobar\bob, which of course doesn't work. I've tried to use hostname\bob, but that doesn't seem to work either... What can I do here? Both computers are running Windows 7.

  Read the article

• PPTP: Linux clients unreachable

  - by Bahman

  I have setup a PPTP server on a CentOS 6 box. Several clients (Windows and Linux) connect to this server. All clients use the same subnet. All clients (Win or Lin) can surf the Internet using the VPN successfully. Windows clients can ping any other Windows client (XP/Vista/7) connected to VPN. Linux clients (KVPNC) can ping any Windows client (XP/Vista/7) connected to VPN. So far so good. But there's this weird problem and I've been trying to figure it out with no luck: No client can ping (reach) a Linux client (successfully) connected to VPN. And yes, the firewall is completely disabled. I'd really appreciate any hint/idea. TIA, EDIT: The ultimate goal of this is to share services across the VPN, like accessing a HTTPD running on a Linux box from a Windows client.

  Read the article

• Sound card issues (High Definition Audio Controller)

  - by Prakash R

  I have a 5-year-old Acer Aspire 4520. Until a month back it was working beautifully on Windows 7 32bit. But then out of the blue, the sound stopped working. I've tried reinstalling the OS 3-4 times. The sound came back a couple of times, but it stopped working after a reboot. Even after installing the sound drivers, I don't see any entry in the Playback tab of the Sound applet in Control Panel. I see a High Definition Audio Controller entry in Device Manager. I disabled and uninstalled it, but Windows reinstalls it automatically. I'll share specific hardware details if anybody here needs to know. The processor is "AMD Athlon(tm) 64 X2 Dual-Core Processor TK-55". Any help would be appreciated.

  Read the article

• LXC Container Networking

  - by digitaladdictions

  I just started to experiment with LXC containers. I was able to create a container and start it up but I cannot get dhcp to assign the container an IP address. If I assign a static address the container can ping the host IP but not outside the host IP. The host is CentOS 6.5 and the guest is Ubuntu 14.04LTS. I used the template downloaded by lxc-create -t download -n cn-01 command. If I am trying to get an IP address on the same subnet as the host I don't believe I should need the IP tables rule for masquerading but I added it anyways. Same with IP forwarding. I compiled LXC by hand from the following source https://linuxcontainers.org/downloads/lxc-1.0.4.tar.gz Host Operating System Version #> cat /etc/redhat-release CentOS release 6.5 (Final) #> uname -a Linux localhost.localdomain 2.6.32-431.20.3.el6.x86_64 #1 SMP Thu Jun 19 21:14:45 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux Container Config #> cat /usr/local/var/lib/lxc/cn-01/config # Template used to create this container: /usr/local/share/lxc/templates/lxc-download # Parameters passed to the template: # For additional config options, please look at lxc.container.conf(5) # Distribution configuration lxc.include = /usr/local/share/lxc/config/ubuntu.common.conf lxc.arch = x86_64 # Container specific configuration lxc.rootfs = /usr/local/var/lib/lxc/cn-01/rootfs lxc.utsname = cn-01 # Network configuration lxc.network.type = veth lxc.network.flags = up lxc.network.link = br0 LXC default.confu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:29:12:30:f2 brd ff:ff:ff:ff:f #> cat /usr/local/etc/lxc/default.conf lxc.network.type = veth lxc.network.link = br0 lxc.network.flags = up #> lxc-checkconfig Kernel configuration not found at /proc/config.gz; searching... Kernel configuration found at /boot/config-2.6.32-431.20.3.el6.x86_64 --- Namespaces --- Namespaces: enabled Utsname namespace: enabled Ipc namespace: enabled Pid namespace: enabled User namespace: enabled Network namespace: enabled Multiple /dev/pts instances: enabled --- Control groups --- Cgroup: enabled Cgroup namespace: enabled Cgroup device: enabled Cgroup sched: enabled Cgroup cpu account: enabled Cgroup memory controller: /usr/local/bin/lxc-checkconfig: line 103: [: too many arguments enabled Cgroup cpuset: enabled --- Misc --- Veth pair device: enabled Macvlan: enabled Vlan: enabled File capabilities: /usr/local/bin/lxc-checkconfig: line 118: [: -gt: unary operator expected Note : Before booting a new kernel, you can check its configuration usage : CONFIG=/path/to/config /usr/local/bin/lxc-checkconfig Network Config (HOST) #> cat /etc/sysconfig/network-scripts/ifcfg-br0 DEVICE=br0 TYPE=Bridge BOOTPROTO=dhcp ONBOOT=yes #> cat /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0 ONBOOT=yes TYPE=Ethernet IPV6INIT=no USERCTL=no BRIDGE=br0 #> cat /etc/networks default 0.0.0.0 loopback 127.0.0.0 link-local 169.254.0.0 #> ip a s 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:29:12:30:f2 brd ff:ff:ff:ff:ff:ff inet6 fe80::20c:29ff:fe12:30f2/64 scope link valid_lft forever preferred_lft forever 3: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 42:7e:43:b3:61:c5 brd ff:ff:ff:ff:ff:ff 4: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 00:0c:29:12:30:f2 brd ff:ff:ff:ff:ff:ff inet 10.60.70.121/24 brd 10.60.70.255 scope global br0 inet6 fe80::20c:29ff:fe12:30f2/64 scope link valid_lft forever preferred_lft forever 12: vethT6BGL2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether fe:a1:69:af:50:17 brd ff:ff:ff:ff:ff:ff inet6 fe80::fca1:69ff:feaf:5017/64 scope link valid_lft forever preferred_lft forever #> brctl show bridge name bridge id STP enabled interfaces br0 8000.000c291230f2 no eth0 vethT6BGL2 pan0 8000.000000000000 no #> cat /proc/sys/net/ipv4/ip_forward 1 # Generated by iptables-save v1.4.7 on Fri Jul 11 15:11:36 2014 *nat :PREROUTING ACCEPT [34:6287] :POSTROUTING ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A POSTROUTING -o eth0 -j MASQUERADE COMMIT # Completed on Fri Jul 11 15:11:36 2014 Network Config (Container) #> cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp #> ip a s 11: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 02:69:fb:42:ee:d7 brd ff:ff:ff:ff:ff:ff inet6 fe80::69:fbff:fe42:eed7/64 scope link valid_lft forever preferred_lft forever 13: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever

  Read the article

• WebDAV mapped drive asking for username and password

  - by confus3d

  Since we migrated domains we're having problems with mapping a drive using a WebDAV connection in our login script. It's a simple net use x: \\server.domain.com\folder Which used to authenticate automatically (all we needed to do to make this happen was to put the server in the intranet zone in the internet explorer settings). Since the domain migration though, nearly everyone is being prompted for a username and password to connect. Does anyone have any idea how to fix this? Any help much appreciated. The webdav share is on a Windows 2003 server running IIS.

  Read the article

• SQLite DB borked when opened on a different machine

  - by pruefsumme

  Hello, I'm using SQLite to store some data. The primary database is on a NAS (Debian Lenny, 2.6.15, armv4l) since the NAS runs a script which updates the data every day. A typical "select * from tableX" looks like this: 2010-12-28|20|62.09|25170.0 2010-12-28|21|49.28|23305.7 2010-12-28|22|48.51|22051.1 2010-12-28|23|47.17|21809.9 When I copy the DB to my main computer (Mac OS X) and run the same SQL query, the output is: 2010-12-28|20|1.08115035175016e-160|25170.0 2010-12-28|21|2.39343503830763e-259|-9.25596535779558e+61 2010-12-28|22|-1.02951149572792e-86|1.90359837597183e+185 2010-12-28|23|-1.10707273937033e-234|-2.35343828462275e-185 The 3rd and 4th column have the type REAL. Interesting fact: When the numbers are integer (i.e. they end with ".0"), there is no difference between the two databases. In all other cases, the differences are ... hm ... surprising? I can't seem to find a pattern. If someone's got a clue - please share!

  Read the article

• USB Device With Embedded Fileserver

  - by Richard Martinez

  I'm attempting to access logs from a proprietary hardware box with no reasonable hope of modifying the software. There is a process on the device to dump log files to a flash drive on the USB port after entering a code sequence. Currently, analysis of the logs requires the following: Physical presence at the device Manual entry of the code sequence Removal of USB device Insertion of USB device into a normal Linux box I'm hoping there is some sort of device that can act as a USB mass storage device but simultaneously make it's contents available as a network file share (wired preferred). Does such a device currently exist? A combo hardware/software solution would also work.

  Read the article

• WinXP workgroup, 3 routers 3 computers

  - by Silvera

  I have 3 computers with WinXP x86, and 3 Cisco 1800 series routers. I'm trying to create a workgroup so that the 3 computers can share files with eachother. They can ping eachother (without any internet connection), and the routers setup is correctly configured (with interfaces, ip adresses, and ports). But none of the computers can see eachother, even though they are on the same network. My first question would be - can it be done the way it is currently configured - and, if yes, how, or can anyone point me in the right direction?

  Read the article

• Should all my files be stored on my shared partition?

  - by James

  I am setting up a tripple boot HD and was going to use a 4th partition to share files between OS's. I was wondering if there is any point in having much space on each OS partition to store files or if I just make the shared partition big and put everything on that? Is there any difference in speed between accessing files on the shared partition vs the native files? Are there any other benefits/disadvantages of having files on either the native/shared partition? EDIT: OS's in question are Windows 7, Ubuntu 12.04, and OS X 10.7.4.

  Read the article

• Wrong owner and group for files created under a samba shared directory

  - by agmao

  I am trying to make writing to a shared samba directory work. I got a very weird problem. Now the shared directory is writable from a client machine. But the files created under the samba share directory have weird owner and group names. I am writing to the shared directory as user mike under the client machine, but the file created always has user and group name as steve instead... Does anybody know why that would happen...? Another thing I just noticed is that on the samba server, the files have owner and user name as samba, which I created for samba clients. Thanks a lot

  Read the article

• Local Group Policy Editor reverting setting to default

  - by Timur Aydin

  On my Windows 7 Ultimate 32bit system, I have changed the following setting: Local Computer Policy - Computer Configuration - Windows Settings - Security Settings - Local Policies - User Right Assignment - Deny access to this computer from the network This setting was by default "Guest" and I deleted this so that Guest can access a defined network share over the LAN. But later, I have changed my mind and wanted to return this setting to its default. So I edited that setting and specified Guest. But the setting became MYWINPC\Guest. So my question is, what is the difference between the previous setting "Guest" and MYWINPC\Guest? And how do I return this setting to its default value, "Guest"?

  Read the article

• Installing Oracle11gr2 on redhat linux

  - by KItis

  I have basic question about installing applications on linux operating system. i am going to express my issue considering oracle db installation as a example. when installing oracle database , i created a user group called dba and and user in this group called ora112. so this users is allowed to install database. so my question is if ora112 uses umaks is set to 077, then no other uses will be able to configure oracle database. why do we need to follow this practice. is it a accepted procedure in application installation on Linux. please share your experience with me. thanks in advance for looking into this issue say i install java application on this way. then no other application which belongs to different user account won't be able use java running on this computer because of this access restriction.

  Read the article

• NATing with a single-homed machine possible?

  - by Harry

  I have the following setup: a) a single-homed machine, A, that can see the Internet. b) other machines B, C, and D that cannot see the Internet. c) A, B, C, and D can see each other. d) all machines are running either RHEL 5.3 or Fedora 16. Question: Is it possible to have B, C, and D share the Internet connection with A somehow? Note, again, that machine A does not have a second NIC installed. (The solutions that I am finding on the Net assume A to be a dual-homed system!) Also, could you please recommend a set of book(s) or online resources for a current and in-depth coverage of iptables for people with only a basic knowledge of TCP/IP?

  Read the article

• How to make sure you server NIC performance is at best on Windows?

  - by Bobb

  I realised that I followed some obscure paper on setting NICs on Windows for too long. It might be outdated with new hardware released in past couple of years and with W2008R2. I read a bit about offloading and RSS settings on Windows and I realiased that it is very much circumstantial. Noone can really say - enable that and disable this. etc. So what I really want is for my next server try and setup testing environment and measure how my particular application will behave with different settings. The target is going to be latency of TCP primarily. Please note I am talking about latency inside the box. Are there precision tools for Windows to measure latency (down to microseconds)? P.S. I know this is not easy question. Windows time drift is awful problem for any precision test but still I am sure I am not the fist person to need that... Please share your experience

  Read the article

• Create room mailbox in Exchange 2007 - cannot view calendar

  - by David Neale

  I'm an application developer and I'm trying to play around with Exchange in order to integrate a room booking system with it. I've created a room mailbox and have set it so that it auto-accepts appointment requests. When creating an appointment as a standard user I can add the room as a resource and its availability will display. However, I can add it as a shared calendar to Outlook 2003 (Unable to display the folder. The Calendar folder could not be found) nor can I return the calendar folder using Exchange Web Services (again, could not find the folder). I've also created an appointment via Exchange Web Services with a room as a resource. The resource was successfully booked (as confirmed when opening it as the room's delegate) but it does not appear on the meeting as viewed by any of the attendees. Is there anything further I need to do in order to share this calendar? How do most organisations set up their Exchange with regards to rooms?

  Read the article

• yum update with shared cache

  - by Sammitch

  We've got a big batch of RHEL6 machines that are due for patching, and for some reason the process here does not involve a local repo. I'm new here, I've asked why, ["it just didn't work"] and I don't have enough time to make it work before the window that's already scheduled. So the usual method is to install yum-downloadonly and run yum update --downloadonly --downloaddir=/mnt/cifs_share and then yum update /mnt/cifs_share/*.rpm which just does not look right to me since not all of these machines have the same set of installed packages. The method I tried today was mounting the share to /var/cache/yum/x86_64/6Server/rhel-x86_64-server-6/packages/ which worked, but then yum automatically deleted everything once it finished. I've looked over the yum man page, but I don't see any flag I can feed it to stop it from deleting everything, nor a flag like up2date's --tmpdir=/mnt/cifs_share. Can anyone out there help me kludge this together until I can get a local repository working?

  Read the article

< Previous Page | 210 211 212 213 214 215 216 217 218 219 220 221  | Next Page >