Search Results

Search found 7238 results on 290 pages for 'step into'.

Page 215/290 | < Previous Page | 211 212 213 214 215 216 217 218 219 220 221 222  | Next Page >

• Windows Server 2003 IPSec Tunnel Connected, But Not Working (Possibly NAT/RRAS Related)

  - by Kevinoid

  Configuration I have setup a "raw" IPSec tunnel between a Windows Server 2003 (SBS) machine and a Netgear FVG318 according to the instructions in Microsoft KB816514. The configuration is as follows (using the same conventions as the article): NetA | SBS2003 | FVG318 | NetB 10.0.0.0/24 | 216.x.x.x | 69.y.y.y | 10.0.254.0/24 Both the Main Mode and Quick Mode Security Associations are successfully completed and appear in the IP Security Monitor. I am also able to ping the SBS2003 server on its private address from any computer on NetB. The Problem Any traffic sent from a computer on NetA to NetB, or from SBS2003 to NetB (excluding ICMP Ping responses), is sent out on the public network interface outside the IPSec tunnel (no encryption or header authentication, as if the tunnel were not there). Pings sent from a computer on NetB to a computer on NetA successfully reach computers on NetA, but the responses are silently discarded by SBS2003 (they do not go out in the clear and do not generate any encrypted traffic). Possible Solutions Incorrect Configuration I could have mistyped something, somewhere, or KB816514 could be incorrect in some way. I have tried very hard to eliminate the first option. Have re-created the configuration several times, tried tweaking and adjusting all the settings I could without success (most prevent the SA from being established). NAT/RRAS I have seen multiple posts elsewhere suggesting that this could be due to interaction between NAT and the IPSec filters. Possibly the NetA private addresses get rewritten to 216.x.x.x before being compared with the Quick Mode IPSec filters and don't get tunneled because of the mismatch. In fact, The Cable Guy article from June 2005 "TCP/IP Packet Processing Paths" suggests that this is the case, (see step 2 and 4 of the Transit Traffic path). If this is the case, is there a way to exclude NetA-NetB traffic from NAT? Any thoughts, ideas, suggestions, and/or comments are appreciated.

  Read the article

• Master does not appear to be a git repository error

  - by EmmyS

  I've inherited a position and instructions for creating a new git repository. Unfortunately I've run into problems and no one here knows what to do. Hoping someone can help me out. Here are the instructions I was left: Create a new repository: For these steps you need to be in the gitosis-admin repository, if you don't have it, in a suitable parent folder do: git clone [email protected]:gitosis-admin.git Edit gitosis.conf file - in gitosis-admin root, under [group base-repo] section, add the name of the new repo to the end of the "writable =" section. Commit change and push back to gitosis-admin master. For the next commands, my_new_project represents the name of your project mkdir my_new_project cd my_new_project git init Copy in any files you want to use to start the repo git commit -a -m "Initializing new repository" git remote add origin [email protected]:my_new_project.git git push master git push master:qa So I did 1 and 2, with no problem. It created a local folder on my machine called gitosis-admin. I edited the gitosis.conf file as indicated. But when I try to do step 3 (which I assume is git push gitosis-admin master) bash tells me that fatal: 'master' does not appear to be a git repository fatal: The remote end hung up unexpectedly What am I doing wrong?

  Read the article

• How can I make a copy of a printer in Win7?

  - by hawbsl

  Has anyone been able to copy an existing printer in Win7? I know that we were able to do this in XP (not as a direct copy/paste, but by installing the printer twice) but in Win7 it doesn't seem to be possible. Googling the answer is hopeless because searching for "copy printer" or "duplicate printer" you get a bunch of posts about "printer copiers" or people complaining about duplicate printers getting created in the background (precisely what I'd like to be able to do) It'd be good to know how to do it in general, but if it depends on the printer type, then in our case we are trying to make a copy of an HP Laserjet. Tried installing from the CD - but the CD is too old for Win7 Tried installing via Add Printer and that seems to install the printer but it's marked with an error. Tried installing via the .exe installer from the HP site and that does result in a successful printer being installed, but it won't let you install the same printer twice (stalls on the "insert USB cable now" step - simply won't enable the greyed out "Next" button). The reason this is required is so that we can print to one to the feeder and to the tray separately.

  Read the article

• Recommendation for a simple no-frills Windows PDF printer driver?

  - by Scott Bussinger

  I'm looking for an extremely simple Windows PDF printer driver that I can recommend to clients. Ideally it would have these characteristics: When you print something, it should just create it as a temporary file and then display it in their default PDF viewer with no prompting. If they want to save it, they can save it manually from inside the viewer. This workflow should be with no special post-install configuration. Installation should be very simple. A double click the installation program and click "Finish" sort of thing. No complicated multi-step installation, no asking questions your grandmother wouldn't know the answer to (preferably no questions at all), no extra crap being installed. An option for a completely silent installation would be nice, but not necessary. Ideally it would be free to simplify their installing on a small network, but low cost is an option. I've tried a quite a few but none really fit the bill. Some can achieve the first goal but only after careful configuration, some try to install extra toolbars, some have other installation complexities that would make it hard for extremely novice users to succeed. Any suggestions? Thanks!

  Read the article

• How can I create a separate toolbar from the Task Bar?

  - by Iszi

  In Windows XP, you could separate toolbars from the Task Bar by dragging them to the desktop. They could then be left lying about anywhere on your screen or, my preferred option, docked to any side of the screen. I found this particularly useful to keep a handy list of common phone numbers quickly accessible. I'd create a new toolbar pointing to a custom folder, and put a bunch of dead shortcuts in the folder that had names and numbers as their file names. I'd then dock the toolbar to the left side, set it to auto-hide and always on top (options which could be set separate from the Task Bar as well) and it would be readily available no matter what else I was doing on my system. However, on my Windows 7 system, I seem unable to perform the crucial step of pulling the new toolbar off of the Task Bar. This is of course with the Task Bar "unlocked" so that I can move all my toolbars around. Is there something I'm missing here, or is this a feature that's been disabled in Windows 7? Is there any way to re-enable it, or otherwise achieve similar functionality? I'd rather be able to do this without additional software, if possible.

  Read the article

• How to (properly) back up a live QEMU/KVM VM?

  - by Roman

  I'm currently engineering a backup solution for KVM VM's as an additional measure to traditional backups. Unfortunately, all currently (August 2013) existing solutions I came across so far either: do not ensure a consistent backup of the VM (losing RAM state, creating a dirty image, or other things), or require lengthy downtime (complete VM shutdown while backing up). I'm aware of QEMU/libvirt's functionality of taking snapshots, however, it's not yet usable since: image-internal snapshots present you with an ever-changing image file, resulting in a likely dirty backup (assuming one uses qcow2 images at all). one cannot yet merge a currently active external snapshot into the original backing image ("blockcommit"). Out of the above reasons, I'm now implementing a script that: Saves the VM's state and halts it Sets up a devicemapper snapshot(s) where the VM's disk images and state reside Resumes the VM Mount the snapshot(s) of step 2. Backs up the VM's disk and state (configuration for convenience) Merges back the snapshot(s). If I got everything right, this will take consistent backups of VM's with only seconds (if at all, since 1-3 is fast, possibly sub-second) of downtime. Of course, when restoring, the VM will be way in the past, but at least giving me the option of an orderly shutdown/reboot. Am I missing something with this solution? Or has someone indeed already implemented this?

  Read the article

• Server 2008 email on Event variables

  - by Jeff Miles

  One of the new features of Server 2008 is the ability to attach a task to a specific event in the event logs. One of the actions available is to send an email through a SMTP server. This is working great, however it would be ideal if in the message body, the Event contents could be placed. I have tried using $eventdescription and %eventdescription%, but those are just shots in the dark. Any amount of googling produces no results. Does anyone know if this is possible? Update: Sparks' suggestion below is a step in the right direction I believe, however that method doesn't seem to work for all values. For example, I can pull the RecordID, Severity and Channel as shown, but I can't use the same method to retreive the EventID, or most importantly the description. Here's the raw XML from one event: [Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"] [System] [Provider Name="DFSR" /] [EventID Qualifiers="16384"]4412[/EventID] [Level]4[/Level] [Task]0[/Task] [Keywords]0x80000000000000[/Keywords] [TimeCreated SystemTime="2009-05-14T18:18:09.000Z" /] [EventRecordID]45692[/EventRecordID] [Channel]DFS Replication[/Channel] [Computer]servername.domain.com[/Computer] [Security /] [/System] [EventData] [Data]9046C3F4-843E-4A53-B941-4B20764072E5[/Data] [Data]D:\departments\Geomatics\Plan Quality\Data Processing\CG3533017 2009-05-13 KT FIXED[/Data] [Data]D:\departments[/Data] [Data]{26D5F604-E603-4F87-8EC3-DE9A945DA8FD}-v927199[/Data] [Data]Departments[/Data] [Data]domain.ca\files\departments[/Data] [Data]B8242CE2-F5EB-47DA-BA5B-1DD2F7EE3AB9[/Data] [Data]DFAA7A54-66CB-4C31-81A0-0F861382C32C[/Data] [Data]CG3533017 2009-05-13-{26D5F604-E603-4F87-8EC3-DE9A945DA8FD}-v927199[/Data] [/EventData] [/Event] I have tried using a ValueQuery for EventData, but it returns no data.

  Read the article

• Export files to remote server using TortoiseSVN

  - by Matt

  Hi, I'm using TortoiseSVN to keep revisions of my code. When I commit changes, I take note of what files have changed and upload them to my server using FTP. Here's my workflow: Edit files on local computer (eg. files in C:\Users\Me\web) Commit changes to local repository using rightclick- TortoiseSVN- SVN Commit. Take the files, open FileZilla (FTP client) and upload the files to a remote server. I was wondering if there was a way in which I could omit step 3 from my workflow. Basically I would like the changed files to be automatically uploaded to the remote server when I commit a version to the repository. Information about my computer environment: Windows 7 Ultimate x64 with TortoiseSVN x64 Notepad++ text editor Files edited are PHP, CSS, JS, HTML, etc. Server is running Linux with PHP 5.2 and MySQL. FileZilla is used to upload files. I can connect to the server via SSH if that is needed. Thank you in advance.

  Read the article

• How does one skip “Windows did not shut down successfully” in Win7-64?

  - by XenonofArcticus

  Migrating an app from an expensive and unreliable dedicated embedded x86 box running WinXP-embedded to COTS hardware (Dell E6410 laptop) running normal Win7-64. At this time, it's not feasible to deploy using Windows 7 embedded. The problem is, that the system is still sort of "embedded". The power could shut off at virtually any time without prior warning. We've stripped the OS down and removed the battery capability so that it will power down as desired. The app never writes to the disk, so it's not like we're going to corrupt anything terribly. The system is essentially idle after our app is up and running (with the exception of some computation, graphics, and TCP/IP and serial communications) so the OS enters a pretty stable state rather quickly. After a power-loss however, it rightly complains that Windows did not shut down successfully and presents the user with the Windows Error Recovery text screen. If left alone, it does eventually move on booting just fine, but we'd like to skip that step if possible. WinXP-embedded is designed to do this automatically, so I know it's possible. I've looked at the Kernel Switches but I didn't see anything documented for "Skip Windows Error Recovery". I've also read extensively on the startup process: http://homepage.ntlworld.com./jonathan.deboynepollard/FGA/windows-nt-6-boot-process.html I know I can disable the auto chkdsk in the registry, but that's not the same thing either. So, how do I streamline the boot process to not hassle the user about a situation that will be the regular normal situation?

  Read the article

• Scaling a LAMP website hosted on EC2

  - by Gublooo

  Hello, I'm very new to all this - I've recently managed to launch my website on EC2. As next step, I want to learn how to scale the website. I have a general idea but wanted some input from the experts about how to go about it. My website is based on LAMP but also has Red5 server which allows users to record messages and also used for playing them back. Currently this is the architecture I'm planning to setup for initial scaling. Deploy four small EC2 instances for the following purposes: Instance-1: On this instance I will run the MySql database Instance-2: On this instance I will run the red5 server Instance-3 & Instance-4 These 2 instances will be used to deploy the website and will have Apache running on them. They will communicate with the mysql server on Instance-1 and red5 server on Instance-2 using the internal IP address. As an when required, I will launch another instance of the same EBS - I will have EBS of say 50 GIG where all the mysql data will be stored. Also red5 will use this EBS to store the video messages Load-Balancer - Use the load balancer provided by Amazon to load balance Instance-3 and Instance-4 This is what I have in mind. I could be way off so please bear with me. Also I have not taken into account the case of scaling MySql server as I currently have no idea about how that will be done and whether or not it is necessary initially. I am aware that Amazon provides auto scaling and mysql scaling as well but I dont want to get into that right now. Your feedback is appreciated Thanks

  Read the article

• Export files to remote server using TortoiseSVN

  - by Matt

  I'm using TortoiseSVN to keep revisions of my code. When I commit changes, I take note of what files have changed and upload them to my server using FTP. Here's my workflow: Edit files on local computer (eg. files in C:\Users\Me\web) Commit changes to local repository using rightclick- TortoiseSVN- SVN Commit. Take the files, open FileZilla (FTP client) and upload the files to a remote server. I was wondering if there was a way in which I could omit step 3 from my workflow. Basically I would like the changed files to be automatically uploaded to the remote server when I commit a version to the repository. Information about my computer environment: Windows 7 Ultimate x64 with TortoiseSVN x64 Notepad++ text editor Files edited are PHP, CSS, JS, HTML, etc. Server is running Linux with PHP 5.2 and MySQL. FileZilla is used to upload files. I can connect to the server via SSH if that is needed. Thank you in advance.

  Read the article

• Server 2008 email on Event variables

  - by Jeff Miles

  One of the new features of Server 2008 is the ability to attach a task to a specific event in the event logs. One of the actions available is to send an email through a SMTP server. This is working great, however it would be ideal if in the message body, the Event contents could be placed. I have tried using $eventdescription and %eventdescription%, but those are just shots in the dark. Any amount of googling produces no results. Does anyone know if this is possible? Update: Sparks' suggestion below is a step in the right direction I believe, however that method doesn't seem to work for all values. For example, I can pull the RecordID, Severity and Channel as shown, but I can't use the same method to retreive the EventID, or most importantly the description. Here's the raw XML from one event: [Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"] [System] [Provider Name="DFSR" /] [EventID Qualifiers="16384"]4412[/EventID] [Level]4[/Level] [Task]0[/Task] [Keywords]0x80000000000000[/Keywords] [TimeCreated SystemTime="2009-05-14T18:18:09.000Z" /] [EventRecordID]45692[/EventRecordID] [Channel]DFS Replication[/Channel] [Computer]servername.domain.com[/Computer] [Security /] [/System] [EventData] [Data]9046C3F4-843E-4A53-B941-4B20764072E5[/Data] [Data]D:\departments\Geomatics\Plan Quality\Data Processing\CG3533017 2009-05-13 KT FIXED[/Data] [Data]D:\departments[/Data] [Data]{26D5F604-E603-4F87-8EC3-DE9A945DA8FD}-v927199[/Data] [Data]Departments[/Data] [Data]swg.ca\files\departments[/Data] [Data]B8242CE2-F5EB-47DA-BA5B-1DD2F7EE3AB9[/Data] [Data]DFAA7A54-66CB-4C31-81A0-0F861382C32C[/Data] [Data]CG3533017 2009-05-13-{26D5F604-E603-4F87-8EC3-DE9A945DA8FD}-v927199[/Data] [/EventData] [/Event] I have tried using a ValueQuery for EventData, but it returns no data.

  Read the article

• How do I use command line and wmctrl to make a window larger than the screen to get a huge screenshot?

  - by Mnebuerquo

  I use a program which makes a large image which I have to scroll to view. The program has no way to save the image, and I have no access to the source to modify it. The only way I have to get the image from the program is by screenshot. My goal is to save the full size image without having to piece together individual screenshots. I'm using this script to try taking a screenshot: #!/bin/bash window=$(wmctrl -l | grep "Program$" | awk '{print $1}') wmctrl -v -i -r $window -e '0,0,0,6030,5828' wmctrl -i -a $window import -window $window ~/Desktop/screenshot.png This uses wmctrl to get the window id ($window) for a window named "Program". It then tries to resize the window to the desired dimensions. It uses imagemagick (import) to save a screenshot.png on the user's Desktop. All of this works except the resize step. I can resize the window using wmctrl -r -e, but sizes greater than the screen size don't work. I'm using Ubuntu 10.04 and the Gnome Desktop. I run two monitors, but I've tried this with one of them disabled. Is there a way to resize the window larger than my screen to get a huge screenshot?

  Read the article

• Can sendmail be configured to discard routed email that has been rejected by the next hop?

  - by Guy Bolton King

  Background: We have a handful of hosts (running sendmail) acting as the MXs for a few domains each. Each domain is handled via the sendmail/cf /etc/mail/virtusertable, with a set of known recipients and a catch-all reject rule. Mail to postmaster on each host is aliased to root, and root is aliased to root+<host>@ourdomain.com. The MX for ourdomain.com is Google Apps, and [email protected] is a simple group that forwards to the admins. Google Apps will reject some emails at the SMTP stage, usually because of illegal attachments (instead of accepting them and filing them as spam). Problem: Given a particular spam email sent to a domain in a virtusertable entry: If the recipient address rejects the mail, then sendmail will try and send a DSN to the sender. If that sender also rejects the mail (because it's a falsified sender, and the MX for the sender rejects the mail as spam), then sendmail sends a DSN to the postmaster. The routing detailed above takes place, and...Google Apps rejects the mail as well. sendmail now gives up with a "savemail panic", and leaves the mail in the queue forever. Our mail queue fills up with garbage Is there any way I can get sendmail to discard messages that have been rejected by the next virtusertable hop (i.e. after step 1 in the Problem description)? Or does anyone have any other solutions to this?

  Read the article

• How to install wordpress without a web browser

  - by bvandrunen

  What I am trying to do is to automate wordpress website creation for the company I am working on. We have lots of information in our database for our customers and we want to create a wordpress website for each customer. The process works great and we have no trouble with the creation of websites/transfer of data or anything like that. The problem we do have is when we buy a new domain (http://www.newdomain.com) our process breaks (we call a stored procedure which installs all the data after the URL is called to install wordpress) if the domain takes more than 15min to resolve. We have tried doing looping (where the process checks to see if the domain resolves and keeps trying - but eventually if fails). So what we are looking for is to see if there is a way to install an URL without actually having the domain resolve yet. I have seen where possibilities where you can change the wp-config file but this doesn't work since we have more than one domain and it changes the source URL for all the domains. What we really need is just a way for us to manually start the install script through a call either through a database or some other way that doesn't check to see if the domain is resolved or pointing at the server or not. Thank for any suggestions. EDIT: All we do to install wordpress is call this URL: http://"newdomain".com/wp-admin/install.php?step=2 - if you change settings in the backend calling this URL will install wordpress without having to go through the wp-admin/install.php form

  Read the article

• HTTPS Proxy which answers CONNECT with own certificate

  - by user1109542

  I'm configuring a DMZ which has the following Scheme: Internet - Server A - Security Appliance - Server B - Intranet In this DMZ I need a Proxy server for http(s) connections from the Intranet to Internet. The Problem is, that all Traffic should be scanned by the Security Appliance. For this I have to terminate the SSL Connection at Server B, proxy it as plain http to Server A through the Security Appliance and then further as https into the Internet. An encryption is then persistent between the Client and Server B and the Target Server and Server A. The communication between Server A and Server B is unencrypted. I know about the security risks and that the client will see some warning about the unknown CA of Server B's certificate. As Software I want to use Apache Web Servers on Server A and Server B. As first step I tried to configure Server B that it serves as endpoint for the SSL Encryption. So it has to establish the encryption with the client (answering HTTP CONNECT). Listen 8443 <VirtualHost *:8443> ProxyRequests On ProxyPreserveHost On AllowCONNECT 443 # SSL ErrorLog logs/ssl_error_log TransferLog logs/ssl_access_log LogLevel debug SSLProxyEngine on SSLProxyMachineCertificateFile /etc/pki/tls/certs/localhost_private_public.crt <Proxy *> Order deny,allow Deny from all Allow from 192.168.0.0/22 </Proxy> </VirtualHost> With this Proxy only the CONNECT request is passed through and an encrypted Connection between the client and the target is established. Unfortunately there is no possibility to configure mod_proxy_connect to decrypt the SSL connection. Is there any possibility to accomplish that kind of proxying with Apache?

  Read the article

• Server Intermittently Inaccessible Externally (but Accessible Internally Continuously)

  - by nicorellius

  I have a CRM on a server on a network. We have a static IP and another server outward facing. We use port-forwarding to map to the CRM, so that when you go to the IP or the FQDN, you get to the CRM: xxx.xxx.xxx.xxx crm.example.com Internally, we can access the CRM by going to crm or crm.example.com Lately, I've been noticing that accessing the server from outside the network times out or gives 503, bad gateway. During that time, I can also SSH (different port, so this works) into the outward facing computer and access the server just fine. I have a robot monitoring the site and indeed via HTTP monitoring the site is going down periodically. I looked through the Apache server access and error logs and nothing stuck out at me so I'm a bit confused as to what could be going on. I also searched the access logs for 503 and found nothing. When I run tracert from outside the network, it appears the packets basically make it through the wider area servers (Comcast city and county servers) and end up dropping at the CRM server's front step. I'm tempted to replace the server because it is older and underpowered but it would be nice to know what is going on. Any ideas what to do next?

  Read the article

• Outlook 2010 Crashing Unpredictably

  - by cbkadel

  Very often when I open up Outlook 2010 and start doing actions in it, it will hang and become non responsive. I have tried letting it finish, but it never does come back (up to 20 minutes of letting it try). I generally have to restart Outlook and try again. Usually after about an hour of doing this, Outlook somehow snaps out of it and works for the rest of the day. It's generally in the morning (though I doubt that's the key variable). Generally, the emails that cause problems are HTML/formatted, but not always. What I've done so far to troubleshoot: Install Latest Outlook Hotfix (I think Dec 14, 2010) Start Outlook in Safe Mode Neither of those steps seem to make a difference. Usually - after about 10-15 restarts of Outlook on any given day, then it starts working thereafter. My next step is to uninstall/reinstall Office 2010, but I'm hoping someone has seen this and knows what to do about it - though not sure. My configuration is like this: Microsoft Online Services (using Microsoft's Sign In App) - Connecting to Exchange I have two other Exchange accounts in this profile (new feature in 2010) connected through Outlook Anywhere. Life Meeting Conferencing Add In I've disabled the People tab/add in. I've disabled the "Send to Bluetooth" add-in. Not sure what else to do?

  Read the article

• Symlink path can be followed manually, but `cd` returns Permission denied

  - by Ricket

  I am trying to access the directory /usr/software/test/agnostic. There are several symlinks involved in this path. As you can see by the below transcript, I am unable to cd directly to the path, but I can check each step of the way and cd to the symlinked directories until I reach the destination. Why is this? (and how do I fix it?) Ubuntu 12.10, bash > ls /usr/software/test/agnostic ls: cannot access /usr/software/test/agnostic: Permission denied > cd /usr/software/test > cd agnostic bash: cd: agnostic: Permission denied > pwd -P /x/eng/localtest/arch/x86_64-redhat-rhel5 > ls -al | grep agnostic lrwxrwxrwx 1 root root 15 Oct 23 2007 agnostic -> noarch/agnostic > ls -al | grep noarch ... lrwxrwxrwx 1 root root 23 Oct 23 2007 noarch -> /x/eng/localtest/noarch > cd noarch > cd agnostic bash: cd: agnostic: Permission denied > ls -al | grep agnostic lrwxrwxrwx 1 5808 dip 4 Oct 5 2010 agnostic -> main > cd main > ls (correct output of `ls`) > pwd /usr/software/test/noarch/main > pwd -P /x/eng/localtest/noarch/main

  Read the article

• Hard drive causing BSOD

  - by JoshIrving

  I've come across a problem after building my new PC and installing a clean Windows 7. I originally planed on a RAID 1 or 0 but after further research I decided against it. So I was left with two 1TB Western Digital Black SATA 6Gb/s hard drives. My plan now was to use my second hard drive as a backup (using Windows Backup or 3rd party software). I set both hard drives to AHCI in the BIOS and installed Windows 7. I went through the lengthy process of downloading and installing each driver manually (latest versions), using the motherboard disk for a list of what I need. After a few restarts and before installing any software, I took an image backup onto DVD and the second hard drive. First witnessed the problem during the first scheduled Windows backup. The progress bar froze at about 70% (doc backup done, image backup in progress). It stayed still for 2 hours until it blue screened. Next time the backup froze, I tried shutting down. It logged me out and got stuck at the last step ("Shutting down" and blue spinner) for an hour, until I hard shutdown. I later realised this hasn't got anything to do with the backup. I ended up blue screening on almost every shut down (same place). Turns out, it's because of the second hard drive spinning down or turning off. The computer will now shutdown properly, as long as I remember to read or write to the second drive before executing shutdown. I've now set "Turn off hard disk after: Never" - No problems, so far. Do I have dodgy hard drive(s) or should I investigate the POWER_STATE_DRIVER_FAILURE BSOD - can it be a driver issue? AHCI?

  Read the article

• How to verify that a physical volume is encrypted? (Ubuntu 10.04 w/ LUKS)

  - by Bob B.

  I am very new to LUKS. During installation, I tried to set up an encrypted physical volume so that everything underneath it would be encrypted. I chose "Use as: physical volume for encryption," the installation completed and I have a working environment. How can I verify that the PV is indeed encrypted? I was never prompted to provide a passphrase, so I most likely missed a step somewhere. At the end of the day, I'd like whole disk encryption if that's possible, so I don't have to worry about which parts of the file system are encrypted and which aren't. If I did miss something, do I have to start over and try again, or can it be done (relatively easily?) after the fact? I would prefer not to introduce more complexity by using TrueCrypt, etc. Environment details: The drives are md raid1. One volume group. A standard boot lv. An encrypted swap lv using a random key (which seems to be working fine). Thank you in advance for your help. This is very much a learn-as-I-go experience.

  Read the article

• 64-bit Windows 7 gets stuck on logo screen on bootup

  - by Richard B

  I've had a PC running Windows 7 in my office which I'm not using at the moment (cause I'm working elsewhere as a consultant atm), I'm only accessing the PC using Team Viewer (http://www.teamviewer.com/) which means the PC has been running for quite some time now. I've restarted it maybe twice a week though. A few days ago I couldn't access it using Team Viewer and when I got to the office the screen was black with only the mouse pointer showing. The PC has four hard disks, three of them (all 1Tb) is using RAID 5. This is what I've done so far: I reboot and everything seems to load correctly. I get to a screen that gives me two choices - boot Windows normally or perform a startup repair. Choosing to boot Windows only gets me to the Windows 7 logo screen which only animates over and over again. Choosing to repair gets me to the repair screen that "checks for problems" and then it gets stuck on the "Attempting repairs..."-screen (I let it run for about 24 hours before giving up). What is the next step to take? I don't have any backups and no system restore points saved. I can access files and folders through a terminal window using a Windows 7 DVD so I guess nothing is lost yet... Please help me, thanks!

  Read the article

• Hard drive causing BSOD

  - by JoshIrving

  I've come across a problem after building my new PC and installing a clean Windows 7. I originally planed on a RAID 1 or 0 but after further research I decided against it. So I was left with two 1TB Western Digital Black SATA 6Gb/s hard drives. My plan now was to use my second hard drive as a backup (using Windows Backup or 3rd party software). I set both hard drives to AHCI in the BIOS and installed Windows 7. I went through the lengthy process of downloading and installing each driver manually (latest versions), using the motherboard disk for a list of what I need. After a few restarts and before installing any software, I took an image backup onto DVD and the second hard drive. First witnessed the problem during the first scheduled Windows backup. The progress bar froze at about 70% (doc backup done, image backup in progress). It stayed still for 2 hours until it blue screened. Next time the backup froze, I tried shutting down. It logged me out and got stuck at the last step ("Shutting down" and blue spinner) for an hour, until I hard shutdown. I later realised this hasn't got anything to do with the backup. I ended up blue screening on almost every shut down (same place). Turns out, it's because of the second hard drive spinning down or turning off. The computer will now shutdown properly, as long as I remember to read or write to the second drive before executing shutdown. I've now set "Turn off hard disk after: Never" - No problems, so far. Do I have dodgy hard drive(s) or should I investigate the POWER_STATE_DRIVER_FAILURE BSOD - can it be a driver issue? AHCI?

  Read the article

• User Group Policy in Server 2008 to set Default Profile settings

  - by Chris

  I have computers to deploy and want to apply changes to the default user policy on these PCs automatically. What's the best way to do this? Our current procedure is: Create the computer account in an OU called "Deployment" on our server Unbox the PC Login as the user who will be receiving the PC Change settings (pre-configure outlook, authorize Office, etc.) move computer account to correct OU Place the PC on the users desk. I would like to make as many of the changes in step #4 with Group Policies applied to the Deployment OU if possible since they're largely repeated for every computer. There are a dozen policies created and the computer ones apply correctly but the user policies do not. I understand this is because the end user is not in our "Deployment" OU. I don't want to apply these settings to the user at their current station just the new PC I'm working on. I believe I have the desired effect with Group Policy Loopback Replace enabled on policies that need user policies changed but this just feels wrong/inefficient/complicated to maintain. Am I doing this correctly? Is Group Policy Loopback the only way to change user accounts on one computer? What do you do to setup a user on a new PC?

  Read the article

• PC doesn't POST with a certain model of PSU

  - by Core Xii

  I have this PC with an Asus P5N32-E SLI motherboard and an Intel Q6600 CPU. I got a new RX-5300 PSU, but it didn't work. The motherboard power LED is on fine When I switch power on, the PC powers up briefly (0.5-1 sec) then shuts down From there on out when I switch power on, it stays on, all fans and components seem to be receiving power, but the motherboard won't POST. No video output, no PC speaker beeps, nothing If I turn the hard switch on the PSU off and then back on again, go to step 2; The PC turns on and then off immediately again, and on subsequent power-ups it stays on but won't POST I disconnected every component but the motherboard, CPU and PSU. Still nothing. I tried three other models of PSU on this PC, both of higher (600) and lower (<300) wattage than the 530 on the RX-5300 and they all work fine. At this point I was convinced the PSU was faulty so I returned it. When the replacement arrived, it behaved exactly the same. So two different units of RX-5300 both with the same symptoms, neither working with this motherboard + CPU. Yet, three other models of PSU work perfectly fine. The PC store couldn't reproduce my problem with the returned PSU. I tried resetting the CMOS with the jumper. I tried with both the 4 and 4+4 (with and without the extra +4 connected) CPU connectors (curiously the RX-5300 comes equipped with both). Could it be a statistical probability that I get two units of the same model of PSU that are faulty in the exact same manner? Could the RX-5300 model itself be somehow incompatible with this motherboard? I was under the impression that PSUs were pretty much universal so long as you have the wattage. Could the motherboard be broken in some such a way as to work with certain PSUs but not others? What's going on here?

  Read the article

< Previous Page | 211 212 213 214 215 216 217 218 219 220 221 222  | Next Page >