Search Results

Search found 21470 results on 859 pages for 'computer graphics'.

Page 216/859 | < Previous Page | 212 213 214 215 216 217 218 219 220 221 222 223  | Next Page >

  • Dual Monitor/Xinerama not working; cannot even detect on-board graphic card

    - by Steven H
    I have Kubuntu 12.04 and two identical VGA monitors. One I plugged via DVI-VGA adapter into the DVI port of my discrete AMD Radeon HD 6670, the other into the VGA port of my on-board graphic card (Radeon HD 6410D). After installing Kubuntu I got a black screen, so I booted with nomodeset and installed AMD's catalyst drivers but only the monitor plugged into the discrete graphic card worked. Using lspci I saw that the on-board graphics was not listed. Then I found in the BIOS settings the options "Surround View" and "Onboard Dual Link DVI" both disabled. After enabling both, the on-board graphics card shows up in lspci but in amdcccle, it only shows as [Uknown display]Uknown adapter. When I try to enable xinerama, I get a black screen after rebooting on both monitors. I tried several options and hints from the web but nothing worked so far. I also reinstalled the AMD drivers several times. What should I do?

    Read the article

  • How to install Intel VGA drive..?

    - by Ary Catur Wicaksono
    how to install intel VGA drive..?? I've been searching on google but did not see too I've been trying to ask the ubuntu forum in Indonesia. but they did not reply my post.. is there anything that can help me? *I am sorry my English is rather chaotic arthur@Chunx:~$ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10) arthur@Chunx:~$ sudo lshw -c display [sudo] password for arthur: *-display description: VGA compatible controller product: 82G33/G31 Express Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 10 width: 32 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:42 memory:fea80000-feafffff ioport:dc00(size=8) memory:e0000000-efffffff memory:fe900000-fe9fffff arthur@Chunx:~$ sudo apt-get install xserver-xorg-video-intel Sedang membaca daftar paket... Selesai Membangun pohon ketergantungan Membaca informasi yang tersedia... Selesai xserver-xorg-video-intel telah berada dalam versi terbaru. 0 dimutakhirkan, 0 baru terinstal, 0 akan dihapus dan 190 tidak akan dimutakhirkan.

    Read the article

  • How to install drivers for NVIDIA GeForce FX 5200 on Precise

    - by Aaron Simmons
    Ok, I'm a total Linux noob. I was able to install 12.4 without issue, except that it says in the system settings that the graphics card/driver is "unknown". I have NVIDIA GeForce FX 5200, and have not been able to get it installed. I've found the driver at NVIDIA but couldn't figure out how to actually install it. I found instructions that used apt-get to automatically find the current driver and install it, and that came close. At least then it showed up in the 3rd party drivers list. It said it was installed but not being used? And I was unable to find out why that might be, or how to get the system to use it Two questions: 1. CAN/SHOULD my graphics card work with 12.4? 2. If so, HOW? I'm running a 100% fresh install, so what's the step-by-step from there?

    Read the article

  • Why does my JButton look differently of different computers?

    - by Roman
    I use JButtons in my application. They need to have different colors. First I used that btn.setBackground(col);. It works on my computer and on another computer my button just gray (not red, as it's supposed to be). Trying to solve this problem I decided to use images. I do it in the following way: tmp = new JButton(newIcon); Again, it works fine on my computer and on another computer I see just gray buttons. Does anybody have any ideas what can be the reason of the problem and how it can be solved? I heard it can be related to "look-and-feel of the native system". But I do not know what it means and what should I do if it is the case? Can anybody pleas, help me with that?

    Read the article

  • TileMapRenderer in libGDX not drawing anything

    - by Benjamin Dengler
    So I followed the tutorial on the libGDX wiki to draw Tiled maps but it doesn't seem to render anything. Here's how I setup my OrthographicCamera and load the map: camera = new OrthographicCamera(Gdx.graphics.getWidth(), Gdx.graphics.getHeight()); map = TiledLoader.createMap(Gdx.files.internal("maps/test.tmx")); atlas = new TileAtlas(map, Gdx.files.internal("maps")); tileMapRenderer = new TileMapRenderer(map, atlas, 8, 8); And here is my render function: Gdx.gl.glClearColor(0, 0, 0, 1); Gdx.gl.glClear(GL10.GL_COLOR_BUFFER_BIT); camera.update(); tileMapRenderer.render(camera); Also I did pack the tile map using the TiledMapPacker. I'm completely stumped... am I missing anything obvious here? EDIT: While debugging I noticed that the TileAtlas seems to be empty, which I guess shouldn't be the case, but I have no idea why it's empty.

    Read the article

  • Help Repainting a Line

    - by serhio
    I am doing a custom control (inherited from VisualBasic.PowerPacks.LineShape), that should be painted like as standard one, but also having a Icon displayed near it. So, I just overrided OnPaint like this: protected override void OnPaint(System.Windows.Forms.PaintEventArgs e) { e.Graphics.DrawIcon(myIcon, StartPoint.X, StartPoint.Y); base.OnPaint(e); } Now, everything is OK, but when my control moves, the icon still remains drawn on the ancient place. Is there a way to paint it properly? The sample code for tests using Microsoft.VisualBasic.PowerPacks; using System.Windows.Forms; using System.Drawing; namespace LineShapeTest { /// /// Test Form /// public class Form1 : Form { IconLineShape myLine = new IconLineShape(); ShapeContainer shapeContainer1 = new ShapeContainer(); Panel panel1 = new Panel(); public Form1() { this.panel1.Dock = DockStyle.Fill; // load your back image here this.panel1.BackgroundImage = global::WindowsApplication22.Properties.Resources._13820t; this.panel1.Controls.Add(shapeContainer1); this.myLine.StartPoint = new Point(20, 30); this.myLine.EndPoint = new Point(80, 120); this.myLine.Parent = this.shapeContainer1; MouseEventHandler panelMouseMove = new MouseEventHandler(this.panel1_MouseMove); this.panel1.MouseMove += panelMouseMove; this.shapeContainer1.MouseMove += panelMouseMove; this.Controls.Add(panel1); } private void panel1_MouseMove(object sender, MouseEventArgs e) { if (e.Button == MouseButtons.Left) { myLine.StartPoint = e.Location; } } } /// /// Test LineShape /// public class IconLineShape : LineShape { Icon myIcon = SystemIcons.Exclamation; protected override void OnPaint(System.Windows.Forms.PaintEventArgs e) { e.Graphics.DrawIcon(myIcon, StartPoint.X, StartPoint.Y); base.OnPaint(e); } } } Nota Bene, for the lineShape: Parent = ShapeContainer Parent.Parent = Panel Update 1 TRACES In this variant of OnPaint, we have traces: protected override void OnPaint(System.Windows.Forms.PaintEventArgs e) { Graphics g = Parent.Parent.CreateGraphics(); g.DrawIcon(myIcon, StartPoint.X, StartPoint.Y); base.OnPaint(e); } Update 2 BLINKS In this variant of OnPaint, we have a blinking image: protected override void OnPaint(System.Windows.Forms.PaintEventArgs e) { Parent.Parent.Invalidate(this.Region, true); Graphics g = Parent.Parent.CreateGraphics(); g.DrawIcon(myIcon, StartPoint.X, StartPoint.Y); base.OnPaint(e); } Update 3: External Invalidation This variant works well, but... from exterior of IconLineShape class: private void panel1_MouseMove(object sender, MouseEventArgs e) { if (e.Button == MouseButtons.Left) { Region r = myLine.Region; myLine.StartPoint = e.Location; panel1.Invalidate(r); } } /// /// Test LineShape /// public class IconLineShape : LineShape { Icon myIcon = SystemIcons.Exclamation; Graphics parentGraphics; protected override void OnPaint(System.Windows.Forms.PaintEventArgs e) { parentGraphics.DrawIcon(myIcon, StartPoint.X, StartPoint.Y); base.OnPaint(e); } protected override void OnParentChanged(System.EventArgs e) { // Parent is a ShapeContainer // Parent.Parent is a Panel parentGraphics = Parent.Parent.CreateGraphics(); base.OnParentChanged(e); } } Even this resolves the problem of the test example, I need this control to be done inside the control, because I can't force the external "clients" of this control do not forget to save the old region and invalidate the parent each time changing a location...

    Read the article

  • Launch command on remote Windows machine, given admin credentials

    - by Bilal Aslam
    I have a Windows Server 2008 instance on Amazon EC2 (Amazon's cloud compute platform, which provides VMs in the cloud). It has an external IP, and I have an admin account on the box. I would like to 'bootstrap' this instance remotely i.e. I want to run commands to download, install and configure apps on it, all without having to log on even once. I have figured out how to do this to a remote, domain-joined computer using WMI. I can even use psexec to get what I want, as long as the remote computer is part of the domain. However, I have NOT been able to do for a remote computer on EC2. Here are some specific restrictions: 1) The remote computer is not part of my domain, hence no Kerberos 2) The remote computer does not have a cert I trust, or vice versa I am sure I am running into to some auth/trust restriction. Is there any way I can run a single command on the remote, given that I have admin privileges? I'm not tied down to using WMI, but I do need to run a command somehow. Feels like this should be a solved problem.

    Read the article

  • creating a pre-menu level select screen

    - by Ephiras
    Hi I am working on creating a tower Defence java applet game and have come to a road block about implementing a title screen that i can select the level and difficulty of the rest of the game. my title screen class is called Menu. from this menu class i need to pass in many different variables into my Main class. i have used different classes before and know how to run them and such. but if both classes extend applet and each has its individual graphics method how can i run things from Main even though it was created in Menu. what i essentially want to do is run the Menu class withits action listeners and graphics until a Difficulty button has been selected, run the main class (which 100% works without having to have the Menu class) and pretty much terminate Menu so that i cannot go back to it, do not see its buttons or graphics menus. can i run one applet annd when i choose a button close that one and launch the other one? IF you would like to download the full project you can find it here, i had to comment out all the code that wasn't working my Menu class import java.awt.*; import java.awt.event.*; import java.applet.*; public class Menu extends Applet implements ActionListener{ Button bEasy,bMed,bHard; Main m; public void init(){ bEasy= new Button("Easy"); bEasy.setBounds(140,200,100,50); add(bEasy); bMed = new Button("Medium");bMed.setBounds(280,200,100,50); add(bMed); bHard= new Button("Hard");bHard.setBounds(420,200,100,50); add(bHard); setLayout(null); } public void actionPerformed(ActionEvent e){ Main m = new Main(20,10,3000,mapMed);//break; switch (e.getSource()){ case bEasy: Main m = new Main(6000,20,"levels/levelEasy.png");break;//enimies tower money world case bMed: Main m = new Main(4000,15,"levels/levelMed.png");break; case bHard: Main m = new Main(2000,10,"levels/levelEasy.png");break; default: break; } } public void paint(){ //m.draw(g) } } and here is my main class initialising code. import java.awt.*; import java.awt.event.*; import java.applet.*; import java.io.IOException; public class Main extends Applet implements Runnable, MouseListener, MouseMotionListener, ActionListener{ Button startButton, UpgRange, UpgDamage; //set up the buttons Color roadCol,startCol,finCol,selGrass,selRoad; //set up the colors Enemy e[][]; Tower t[]; Image towerpic,backpic,roadpic,levelPic; private Image i; private Graphics doubleG; //here is the world 0=grass 1=road 2=start 3=end int world[][],eStartX,eStartY; boolean drawMouse,gameEnd; static boolean start=false; static int gridLength=15; static int round=0; int Mx,My,timer=1500; static int sqrSize=31; int towers=0,towerSelected=-10; static int castleHealth=2000; String levelPath; //choose the level Easy Med or Hard int maxEnemy[] = {5,7,12,20,30,15,50,30,40,60};//number of enimies per round int maxTowers=15;//maximum number of towers allowed static int money =2000,damPrice=600,ranPrice=350,towerPrice=700; //money = the intial ammount of money you start of with //damPrice is the price to increase the damage of a tower //ranPrice is the price to increase the range of a tower public void main(int cH,int mT,int mo,int dP,int rP,int tP,String path,int[] mE)//constructor 1 castleHealth=cH; maxTowers=mT; money=mo; damPrice=dP; ranPrice=rP; towerPrice=tP; String levelPath=path; maxEnemy = mE; buildLevel(); } public void main(int cH,int mT,String path)//basic constructor castleHealth=cH; maxTowers=mT; String levelPath=path; maxEnemy = mE; buildLevel(); } public void init(){ setSize(sqrSize*15+200,sqrSize*15);//set the size of the screen roadCol = new Color(255,216,0);//set the colors for the different objects startCol = new Color(0,38,255); finCol = new Color(255,0,0); selRoad = new Color(242,204,155);//selColor is the color of something when your mouse hovers over it selGrass = new Color(0,190,0); roadpic = getImage(getDocumentBase(),"images/road.jpg"); towerpic = getImage(getDocumentBase(),"images/tower.png"); backpic = getImage(getDocumentBase(),"images/grass.jpg"); levelPic = getImage(getDocumentBase(),"images/level.jpg"); e= new Enemy[maxEnemy.length][];//activates all of the enimies for (int r=0;r<e.length;r++) e[r] = new Enemy[maxEnemy[r]]; t= new Tower[maxTowers]; for (int i=0;i<t.length;i++) t[i]= new Tower();//activates all the towers for (int i=0;i<e.length; i++)//sets all of the enimies starting co ordinates for (int j=0;j<e[i].length;j++) e[i][j] = new Enemy(eStartX,eStartY,world); initButtons();//initialise all the buttons addMouseMotionListener(this); addMouseListener(this); }

    Read the article

  • LIBPCAP and WIRESHARK Capture on PPP

    - by user655629
    Hi, I have written a small bridge program using LIBPCAP API. I have installed Winpcap 3.1 Beta for support in order to capture from a PPP interface. What i do is, I capture from the PPP interface through my LIBPCAP program and send the traffic to another Ethernet interface in my computer. Then i connect this Ethernet Interface to another Ethernet Interface at another computer where i monitor it through Wireshark. So in short my PPP-Ethernet Bridge is on computer 1. And Another computer2 directly connected to computer1 on Ethernet monitors the incoming traffic from the bridge through wireshark. The problem i face is that when i capture PPP traffic through wireshark in computer1, i see reasonable delay between the packets. But when i use my LIBPCAP program to capture and relay traffic and check the traffic on computer 2 using Wireshark it gives jumps of 0.5seconds delay after some packets. This is quite unexplainable to me. I dont understand how wireshark PPP direct capture on computer 1 does not give delay and LIBPCAP program is giving delay. I have checked my bridge for Ethernet to Ethernet relaying and there is no delay like the one i am experiencing in case of PPP-Ethernet. a higher delay between packets is acceptable but such a BIG delay after a couple of packets is unacceptable. Please help if you can. Best Regards FIKA

    Read the article

  • SSH into Ubuntu Linux on a box without a static IP address

    - by Steven Xu
    Basically, how do I do it? I'd like to connect to my home computer from work, but my internet is routed through my apartment building's network, so I don't have the static IP address I'm accustomed to having. How do I go about accessing my home computer through SSH (I'll be using Putty at work if it matters) if my home computer doesn't have a static IP address?

    Read the article

  • Minecraft Fullscreen not working

    - by Straemer
    I upgraded to Quantal recently, and Minecraft seems to not want to run in fullscreen. When I go to fullscreen it, the screen will go black for a second, as if it was about to go fullscreen normally, but then it just restores back into its window. So far I have tried: using different JREs (I've tried openjdk 6 and 7, as well as oracle7). Oracle's jre wouldn't even run Minecraft (I just got a black screen after logging in) switching graphics drivers (tried nvidia-current, nvidia-current-updates, and xserver-xorg-video-nouveau) updating minecraft bin files updating lwjgl libraries separately from the lwjgl site None of this seemed to work at all. I am running Minecraft with the command java -Xmx1024M -Xms512M -cp minecraft.jar net.minecraft.LauncherFrame Graphics card is GeForce 9500 GS/PCIe/SSE2. Everything was working fine a few days ago when I was on 12.04.

    Read the article

  • run tomcat server on lan

    - by pravin
    I am running a server on Windows XP SP2 computer . Lets call it computer_1. The ip address of computer is 192.168.1.2 Now I have another computer ( computer_2) on the lan with ip address 192.168.1.3 I want to access the site on computer_1 from computer_2. comupter_2 can ping computer_1 (ping 192.168.1.2 works) But when I type http://192.168.1.2 in the browser of computer_2, nothing happens. I want to access the site on comupter_1 from computer_2 Please help.

    Read the article

  • What Type of Options should be on the Game Settings Menu?

    - by A13X
    I have seen a post about the main menu options here: UI: Main Menu options for mobile games. What options should be listed? What do users want to see? But I want to know what kind of options should/need to be available on the settings screen. I am making a rather simple 2D game for Android, but really I haven't found many aspects that warrant an options button or a check box besides turning the sound and music on/off. I was thinking graphics settings but then again, how many apps really need graphics settings besides immersive 3D ones?

    Read the article

  • NVIDIA 550M Drivers

    - by DOOM
    First to say, I am newbie, to the linux world and in situation where i have to get used to using ubuntu. My system is: i7-2630QM 8GB Ram with 750GB HD + NVIDIa 550M (1GB) Since i was facing problems with wubi - "slow Ubuntu", i installed it on a separate partition, of 80GB (10GB Swap, 40GB HOME, 30GB ROOT). The system was running fine, before I started using some "CFD" (Graphics Dependent) application. I needed to use "paraview" a graphics software, to design some engineering stuff. Following the installation problems, i installed something called "messa" on my system. The software works but, now my system is "dead-slow". Even with the computer at an idle state, the laptop, is pretty slow, and with huge annoying fan noise. I was tried running some similar applications with windows, and it turns out that its not a hardware, but has to do with the GPU drivers. Following some forums, I installed the "nvidia-current" and now everything is the same. I know, there are many solutions on this forum for nvidia-driver updates, but as you see, nothings working my way. Please someone, tell me what is that I am doing wrong :( This is the output from my terminal for the command lspci | grep 'intel' 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5) 00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5) 00:1d.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM67 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 03:00.0 Network controller: Intel Corporation Centrino Wireless-N 1030 (rev 34)

    Read the article

  • Point[] and Tri not "could not be found"

    - by Craig Dannehl
    Hi I'm trying to learn how to load a .obj file using OpenTK in windows Forms. I have seen a lot of examples out there, but I do see almost everyone uses List, and Point[]. Code example show these highlighted like there IDE know what these are; for example List<Tri> tris = new List<Tri>(); but mine just returns "The type or namespace name 'Tri' could not be found" is there an include I need to add or a using I am missing. Currently have this using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.IO; using System.Drawing; using OpenTK; using OpenTK.Graphics; using OpenTK.Graphics.OpenGL;

    Read the article

  • SAPPHIRE HD 7770 no audio on HDMI TV display

    - by zeroconf
    I have SAPPHIRE HD 7770 and cannot get work audio over HDMI. http://www.sapphiretech.com/presentation/product/?cid=1&gid=3&sgid=1159&lid=1&pid=1452&leg=0 I use Ubuntu 12.04 LTS 64-bit version with all current updates. I tried at /etc/default/grub: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash radeon.audio=1" ... it didn't help. It's probably I use proprietary driver -this seems to be open source driver. I use the driver, what jockey-gtk (additional drivers) offered me: ATI/AMD PROPRIETARY FGLRX GRAPHICS DRIVER <---- I installed that one ATI/AMD PROPRIETARY FGLRX GRAPHICS DRIVER (post-release update) So - I installed the first one, because installing second version failed. Everything went fine but no sound at TV display by HDMI. Even Gnome sound mixer doesn't show HDMI choice. Using 32" Samsung B530 LCD TV - http://www.lcdbesttv.com/2010/02/samsung-b530-series-lcd-tv/ I have Asus P8Z77-M motherboard - http://www.asus.com/Motherboards/Intel_Socket_1155/P8Z77M/ - there is also HDMI integrated. When I put HDMI cord to that plug, then even Gnome sound mixer showed HDMI audio but it didn't work. I have set from BIOS, that I use that SAPPHIRE HD 7770 from PCIe. My lspci output: 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Ivy Bridge PCI Express Root Port (rev 09) 00:02.0 Display controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.5 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 6 (rev c4) 00:1c.6 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Device 683d 01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Device aab0 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 09) 04:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 03)

    Read the article

  • How can I set my screen resolution to match my TV?

    - by Scott Severance
    I have a computer in my classroom that's connected to an LG smart TV (that's actually not so smart. I wouldn't recommend buying one.). For the touch interface, the TV wants a resolution of 1920x1080 at 60Hz. However, I can't seem to set the computer to that resolution. The display settings only offer 1024x768 and 640x480. The computer dual boots with Windows XP, where widescreen options are available in approximately the required size, but the exact resolution -- or even aspect ratio-- isn't available in XP either. I tried the following command: xrandr -s 1920x1080 -r 60 The response was: Size 1920x1080 not found in available modes Back in the old days, the solution would be to edit xorg.conf. However, since that file no longer exists, and I haven't found up-to-date info, I don't know what else to do. If it helps, this machine will never be connected to a different display, so resolution flexibility isn't important. Here's the output of lshw: *-display:0 description: VGA compatible controller product: 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 03 width: 64 bits clock: 33MHz capabilities: vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:42 memory:fe800000-febfffff memory:d0000000-dfffffff ioport:ecd8(size=8) *-display:1 UNCLAIMED description: Display controller product: 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 03 width: 64 bits clock: 33MHz According to the system settings, my graphics driver is unknown and my "experience" is standard. This is 64-bit Ubuntu 12.04 (Precise) Note: There are a number of similar questions to this one, but they didn't include any answers that helped me. Update After posting this question, I noticed one in the sidebar that I hadn't found through search but which appeared to contain the answer. Based on that question, I created the /etc/X11/xorg.conf file below: Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" FontPath "built-ins" EndSection Section "Module" Load "glx" Load "dri2" Load "dbe" Load "dri" Load "record" Load "extmod" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "LG" ModelName "Smart TV" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "DRI" # [<bool>] #Option "ColorKey" # <i> #Option "VideoKey" # <i> #Option "FallbackDebug" # [<bool>] #Option "Tiling" # [<bool>] #Option "LinearFramebuffer" # [<bool>] #Option "Shadow" # [<bool>] #Option "SwapbuffersWait" # [<bool>] #Option "TripleBuffer" # [<bool>] #Option "XvMC" # [<bool>] #Option "XvPreferOverlay" # [<bool>] #Option "DebugFlushBatches" # [<bool>] #Option "DebugFlushCaches" # [<bool>] #Option "DebugWait" # [<bool>] #Option "HotPlug" # [<bool>] #Option "RelaxedFencing" # [<bool>] Identifier "Card0" Driver "intel" BusID "PCI:0:2:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 24 #SubSection "Display" # Viewport 0 0 # Depth 1 #EndSubSection #SubSection "Display" # Viewport 0 0 # Depth 4 #EndSubSection #SubSection "Display" # Viewport 0 0 # Depth 8 #EndSubSection #SubSection "Display" # Viewport 0 0 # Depth 15 #EndSubSection #SubSection "Display" # Viewport 0 0 # Depth 16 #EndSubSection SubSection "Display" Viewport 0 0 Depth 24 Modes "1024x768" "1920x1080" EndSubSection EndSection According to /var/log/Xorg.0.log, my settings aren't being applied. In fact, I wonder if the config file is even being read. [ 1209.083] (**) intel(0): Depth 24, (--) framebuffer bpp 32 [ 1209.084] (==) intel(0): RGB weight 888 [ 1209.084] (==) intel(0): Default visual is TrueColor [ 1209.084] (II) intel(0): Integrated Graphics Chipset: Intel(R) G41 [ 1209.084] (--) intel(0): Chipset: "G41" [ 1209.084] (**) intel(0): Relaxed fencing enabled [ 1209.084] (**) intel(0): Wait on SwapBuffers? enabled [ 1209.084] (**) intel(0): Triple buffering? enabled [ 1209.084] (**) intel(0): Framebuffer tiled [ 1209.084] (**) intel(0): Pixmaps tiled [ 1209.084] (**) intel(0): 3D buffers tiled [ 1209.084] (**) intel(0): SwapBuffers wait enabled [ 1209.084] (==) intel(0): video overlay key set to 0x101fe [ 1209.172] (II) intel(0): Output VGA1 using monitor section Monitor0 [ 1209.260] (II) intel(0): EDID for output VGA1 [ 1209.260] (II) intel(0): Printing probed modes for output VGA1 [ 1209.260] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 1209.260] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 1209.260] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 1209.260] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz) [ 1209.260] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz) [ 1209.260] (II) intel(0): Output VGA1 connected [ 1209.260] (II) intel(0): Using user preference for initial modes [ 1209.260] (II) intel(0): Output VGA1 using initial mode 1024x768 [ 1209.260] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 1209.260] (II) intel(0): Kernel page flipping support detected, enabling [ 1209.260] (==) intel(0): DPI set to (96, 96)

    Read the article

  • nvidia optimus laptops

    - by kellogs
    kellogs@kellogs-K52Jc ~ $ lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 03:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 80) 03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 80) 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 80) 03:00.4 System peripheral: JMicron Technology Corp. xD Host Controller (rev 80) 03:00.5 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 03) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05) kellogs@kellogs-K52Jc ~ $ inxi -SGx System: Host: kellogs-K52Jc Kernel: 3.5.0-17-generic x86_64 (64 bit, gcc: 4.7.2) Desktop: KDE 4.9.5 (Qt 4.8.3) Distro: Linux Mint 14 Nadia Graphics: Card: Intel Core Processor Integrated Graphics Controller bus-ID: 00:02.0 X.Org: 1.13.0 drivers: intel (unloaded: fbdev,vesa) Resolution: [email protected] GLX Renderer: Mesa DRI Intel Ironlake Mobile GLX Version: 2.1 Mesa 9.0.3 Direct Rendering: Yes Manufacturer advertises the K52Jc model which I bought as optimus enabled. However, no traces of it in the output above. Of course, Bumblebee would not start on this machine. Should I rest assured that is a defective / un-optimused machine ? thanks

    Read the article

  • 11.10 runs really choppy and slow, but not if I choose "Gnome Classic"

    - by Ingram
    I'd like to use Unity with Ubuntu 11.10, but everything from Unity runs really choppy and slow. I have an ATI graphics card and I have installed the drivers through "Additional Drivers". The drivers work, as I can play 3d games flawlessly. When I drag the mouse box around or drag windows around, it is really choppy. I previously had Ubuntu 10.10 and everything worked fine. I installed gnome 3 on 11.10 and it does the same thing Unity does, very choppy and slow graphics. However, if I choose Gnome Classic, everything is fine. I can drag the mouse box all around with no problems. I can drag windows around and it looks and feels great. Is this a bug with Unity? Are others experiencing this? Or is there something I can do to fix this?

    Read the article

  • GPU On-the-fly encoding of video through Logitech HD Webcam C510

    - by Ashfame
    Originally asked here but I edited that to move this question as a different one on suggestion by a fellow member. I read that I should have a Core2Duo 2.2Ghz for 720p but I have a 2.0Ghz one, would it be possible for me to first record it and then encode it after recording if my processor really start giving issue when doing on-the-fly encoding? I also have a ATI HD 4850 512MB card, if it can help in encoding on-the-fly or is there a chance that my graphics card alone can handle it and those specs were just for a system without a graphics card? I believe so. Also, I got no worries in dealing with console, if I have to do some of the things above in terminal. Other possible significant details: I have a dual screen setup 29" (1360X768) & 22" (1680X1050) which might be using some good power from GPU and I have 2GB DDR2 800Mhz RAM.

    Read the article

  • Ubuntu 13.10 and Dell Inspiron 7520 SE (Intel 4000 and ATI radeon HD 7730m)

    - by pjgowtham
    I installed 13.10 and i have problems with my display. Everything else works fine. I cant control my brightness. I thought the graphics driver is the problem. So i went to software updates, switched to another driver (proprietary) and the Ubuntu screen went black and i wasn't able to boot either. I cant use my lap with such low brightness. Then i reinstalled 13.10 again, This time full hdd reset. Same problem occurred. I grabbed radeon hd7730m for Linux x64 from the amd site, installed it, and the screen went black with only the "x" cursor showing on the next boot. What should i need to do to make my brightness work and stabilize graphic cards as mine is switchable graphics type.

    Read the article

  • Changing DisplayMode seems not to update Input&Graphic Dimension

    - by coding.mof
    I'm writing a small game using Slick and Nifty-GUI. At the program startup I set the DisplayMode using the following lines: AppGameContainer app = new ... app.setDisplayMode( 800, 600, false ); app.start(); I wrote a Nifty-ScreenController for my settings dialog in which the user can select the desired DisplayMode. When I try to set the new DisplayMode within this controller class the game window gets resized correctly but the Graphics and Input objects aren't updated accordingly. Therefore my rendering code just uses a part of the new window. I tried to set different DisplayModes in the main method to test if it's generally possible to invoke this method multiple times. It seems that changing the DisplayMode only works before I call app.start(). Furthermore I tried to update the Graphics & Input object manually but the init and setDimensions methods are package private. :( Does someone know what I'm doing wrong and how to change the DisplayMode correctly?

    Read the article

< Previous Page | 212 213 214 215 216 217 218 219 220 221 222 223  | Next Page >