Search Results

Search found 72218 results on 2889 pages for 'multiple definition error'.

Page 216/2889 | < Previous Page | 212 213 214 215 216 217 218 219 220 221 222 223  | Next Page >

• Configuring three monitors with two Radeon X1600/X1650 graphics cards under Ubuntu

  - by cpm

  I have three SyncMaster 932a monitors I want to use with two Radeon X1600/X1650 cards under Linux. I am running X.org X Server 1.6.0, as provided by Ubuntu's Wubi installer. After turning off mirroring, I ended up with this xorg.conf: Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Device" Identifier "Configured Video Device" EndSection The left monitor had a menu bar and a task bar, the center monitor was just desktop, and windows would maximize to the current monitor. The third monitor and second graphics card weren't being used at all. Then I changed my configuration to manually specify each card with their PCI bus: Section "ServerLayout" Identifier "TheLayout" Screen 0 "Radeon Screen 1" Screen 1 "Radeon Screen 2" RightOf "Radeon Screen 1" EndSection Section "Screen" Identifier "Radeon Screen 1" Monitor "Configured Monitor" Device "Radeon the First" SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Screen" Identifier "Radeon Screen 2" Monitor "Configured Monitor" Device "Radeon the Second" EndSection Section "Device" Identifier "Radeon the First" Driver "radeon" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "Radeon the Second" Driver "radeon" BusID "PCI:2:0:0" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Now both the left and right monitors have task bars and menu bars. Windows cannot be dragged from the first two monitors to the third monitor. Also, maximizing in the left or center window fills both monitors. I also tried adding Option "Xinerama" "true" to the ServerLayout section. X11 wasn't able to start up. I want to: Allow moving windows along all three monitors. Maximizing only fills the current monitor. Either have menu/task bars on only the left monitor or all three monitors How can I make this possible?

  Read the article

• disk space error, cant use internet

  - by James

  after trying to install drivers using sudo apt-get update && sudo apt-get upgrade, im faced with a message saying no space left on device, i ran disk usage analyzer as root and there was three folders namely, main volume, home folder, and my 116gb hard drive (which is practically empty) yet both other folders are full, which is stopping me installing drivers because of space, how do i get ubuntu to use this space on my hard drive? its causing problems because i cant gain access to the internet as i cant download drivers when i havnt got enough space, this happens every time i try it

  Read the article

• Error when trying to access Shared files from iMac via smb

  - by SatheeshJM

  I used to access all my Windows XP shared files on my Mac using Finder -- Window -- Connect to server. Now all of a sudden, an error crops up when I try to connect. I get the error "There was a problem connecting to the server "192.168.1.*" The server may not exist or it is unavailable at this time. Check the server name or IP address, check your internet connection and then try again. How can I remove this error and access my shared files from my Mac? P.S my network connections is fine.

  Read the article

• dd clone hard drive: Input/Output Error though "chkdsk" says OK

  - by unknown (google)

  Hi, I've used dd to clone hard drives before using 'dd' and a live cd, but have run into a problem. The issue: dd fails with an "Input/Output Error" on /dev/sda3 , even though windows "check disk" (chkdsk) says it's ok. Context: Trying to replace my laptop hard drive w/ a faster one of the same size Laptop has NTFS on a 320gb hard drive Booting into knoppix Knoppix recognizes 'original' drive (/dev/sda) I am using a usb connection for ‘new' drive (irrelevant, but just an fyi) Knoppix recognizes the usb drive as /dev/sdb Using dd, as follows: dd if=/dev/sda of=/dev/sdb "dd" gives the I/O error above at 82Gb (out of 320Gb) I then tried checking each partition as follows and found it failed on /dev/sda3: dd if=/dev/sda1 of=/dev/null dd if=/dev/sda2 of=/dev/null dd if=/dev/sda3 of=/dev/null I have ran windows xp chkdsk on the offending drive in both "find only" and "find and fix" mode and it reports no errors Question How can I find and fix the error on my original hard drive partition (i.e. /dev/sda3) so that dd reads it successfully?

  Read the article

• juju bootstrap key error?

  - by mxdog

  I followed the guides the best as i could. there is some information missing like do as root or as regular user ..formatting, quotes no quotes..what the password or paraphrase for ssh should be ..couple other trivial things. that im sure add up to where im at (stuck!) so i have a working mass server on mx-nas-01 and 3 nodes and have been trying to get juju to start. I have tried this as both root and my regular account, sudo no-sudo and here is the output i get from juju bootstrap (however i try it) I don't know if this could be a host,domain,account issue or what i will mention i did have to shut off my dhcp server and install masq (all defaults) to get the maas pxe to work for the nodes mxdog@mx-nas-01:/$ juju bootstrap Traceback (most recent call last): File "/usr/bin/juju", line 8, in main(sys.argv[1:]) File "/usr/lib/python2.7/dist-packages/juju/control/init.py", line 183, in main env_config.load_or_write_sample() File "/usr/lib/python2.7/dist-packages/juju/environment/config.py", line 229, in load_or_write_sample self.load() File "/usr/lib/python2.7/dist-packages/juju/environment/config.py", line 115, in load self.parse(file.read(), path) File "/usr/lib/python2.7/dist-packages/juju/environment/config.py", line 138, in parse config = SCHEMA.coerce(config, []) File "/usr/lib/python2.7/dist-packages/juju/lib/schema.py", line 266, in coerce new_dict[k] = self.schema[k].coerce(v, path) File "/usr/lib/python2.7/dist-packages/juju/lib/schema.py", line 233, in coerce new_subvalue = self.value_schema.coerce(subvalue, value_path) File "/usr/lib/python2.7/dist-packages/juju/lib/schema.py", line 301, in coerce return self.schemas[selected].coerce(value, path) KeyError: 'mass' environments: maas: type: mass mass-server: http://192.168.0.30:80/MAAS mass-oauth: tDRdtJeEKVARBh93eT:N5dK5HSZBsA45cBdx9:S8wMNrfkT9PeYvQN9YrnbHGxmKARv8vb admin-secret: ########## default-series: precise

  Read the article

• Triple-monitor set-up (2 unique, 1 cloned): Can a VGA splitter be used on one output of a dual-head

  - by stakx

  Background: I'm currently researching hardware components for some kind of information terminal we're building. This application of ours makes use of three output screens: (1) A touch screen where all user input is made; (2) A regular LCD monitor where the requested information is being displayed; and (3) A projector which displays exactly the same signal as screen (2) does. (All screens will run at the same resolution of 1024x768 btw.) Now I figured that using a dual-head video card would be sufficient, let's say a Matrox P690 low-profile PCI card. This would involve having a Y cable connected to the graphics card itself, then two DVI-to-VGA adapters at each end of the Y cable, and then having a VGA splitter on one of the VGA outputs. The following shows the setup in question: 0--1---------2-> VGA (DSUB-15) \ \ ----2-3---------> VGA (DSUB-15) \ \ -----------------> VGA (DSUB-15) 0: graphics card (LFH60 jack) 1: LFH60 to DVI-I dual monitor Y cable 2: DVI-to-VGA adapters 3: VGA splitter cable Question(s): Will this work? I'm particularly concerned about the following points: Can a low-profile PCI video card output a signal which is strong enough for three monitors (even if it's a dual-head card)? Does the combination of so many adapters and splitter cables work? (The LFH-to-DVI cable comes with the video card) Will the VGA splitter cable degrade the signal on the output screen & projector significantly? (If so, would a USB-powered splitter cable remedy this problem?) I can't possibly expect anyone to answer all those questions, but any input is appreciated.

  Read the article

• an error while restoring windows 7 from a restore point

  - by user178231

  When I make a restore point and I come back to restore the windows 7, it gives this error: No restore point have been created on your computer system drives, to create a restore point open system protection. I've made a restore point why does it give this error? What should I do? I completely know how to make restore points and I've made some on the laptop and other devices but in my computer which have windows 7 when I make restore point and when I want to use them it gives the error! Please help. I'm not English so can't speak it well.

  Read the article

• How to open a pdf or a djvu on an specific instance of a document viewer?

  - by ciro

  I want using any free Linux document viewer that does both pdf and djvu (Okular, Evince, etc.) to do the following: magic_command('document-viewer','./11.pdf','instance1') magic_command('document-viewer','./21.djvu','instance2') two instances (windows) of document-viewer are opened one with 11.pdf and the other with 21.djvu then: magic_command('document-viewer','./12.djvu','instance1') magic_command('document-viewer','./22.pdf','instance2') the first instance (window) of document-viewer loads 12.djvu the second instance (window) of document-viewer loads 22.pdf

  Read the article

• Ubuntu Server won't boot with "zip2: Compressed file ends unexpectedly" error

  - by Oetzi

  I am trying to boot lucid server on my new VPS but its giving me some problems. The boot gets to a point where it hangs. At this point it says: No such file `modules-2.6.31-20-server-amd64.tar.bz2' zip2: Compressed file ends unexpectedly You can use the `bzip2recover' program to attempt to recover data from undamaged sections of corrupted files. tar: Child returned status 2 tar: Exiting with failure status due to previous errors Module installation failed. Does anyone have any ideas how I might be able to fix this? Sorry that this is rather vague!

  Read the article

• Error installing Windows7 64 bits on VirtualBox

  - by MetaDark

  I am trying to set up Windows in Virtual Box, so I don't need to reboot in the rare occasion that I actually need it. The problem is, Virtual Box doesn't preform any errors when I insert the 32bit installation CD but when I try to use the 64bit installation; What!? I am already using the installation disc! I've checked my BIOS to see if I have SVM (AMD's version of VT) disabled and all I see is "Enabled" I have a K9N6PGM2-V2 motherboard A Triple Core AMD Athlon II A Nvdia NForce 430 integrated graphics card 4GB of RAM An 80GB IDE And a 1TB SATA I don't think the last three specifications matter but just in case XP I am pretty sure the CD isn't broken ( I am going to make sure in just a moment ), what could be the cause to this problem? Edit: The 64bit installation CD is not broken, but I found out when trying to install from the 32bit version that it's trying to upgrade, not preform a fresh install - Odd.

  Read the article

• Thinkpad brightness steps error using FN+Home/End

  - by petermolnar

  I've met the following problem: normally my T400 (Lenovo Thinkpad) has 16 steps of brightness, and Windows utilizes it correctly. After a fresh install & minor tweaks Mint 12 (which is based on 11.10 Ubuntu) I only had 6 steps which was way to few. Listing /sys/class/backlight showed 3 entried. I removed the acpi-tools package, one of the disapperared - and I now have 10 steps! Therefore I think if I can reduce the entries to 1 I'm going to have 16 steps, since the stepping will be 1 instead of 2 (or 3). /sys/class/backlight/ intel_backlight -> ../../devices/pci0000:00/0000:00:02.0/drm/card0/card0-LVDS-1/intel_backlight thinkpad_screen -> ../../devices/virtual/backlight/thinkpad_screen The problem is that I'm unable to trace back what are the configs / daemons / kernel options triggers these two. More strangely, I discovered a strange behaviour. I monitored watch -n1 "cat /sys/class/backlight/thinkpad_screen/actual_brightness" and watch -n1 "cat /sys/class/backlight/intel_backlight/actual_brightness" while changing the brightness with FN+home/end combinations from max to min. The outcome is the following: brighness intel thinkpad --------- ----- -------- MAX 2408475 7 | 1955115 5 | 1435640 3 | 1246740 1 | 1086175 0 | 1010615 6 | 859495 4 | 689485 2 v 481695 0 MIN 217235 0 brighness intel thinkpad --------- ----- -------- MIN 217235 0 | 481695 2 | 689485 4 | 859495 6 | 1010615 7 | 1086175 1 | 1246740 3 | 1435640 5 v 1955115 7 MAX 2408475 0 When stepping from MIN to MAX, there's no difference between the last 2 steps. Also, the OSD icon (Cinnamon desktop, default theme) goes from full to min in 4 steps and from full to min once again in 4 steps. So... it seems that the intel entry is working correctly, showing correct values. The thinkpad entry however twists the things and even showing incorrect values. Does anyone have any idea how to get rid of the thinkpad entry? System data: Linux Mint 12 3.0.0-16 kernel Lenovo ThinkPad T400 Cinnamon 1.4 desktop For any additional info, please tell me what do you need. EDIT I'm sorry, I forgot to mention, I added acpi_backlight=vendor to GRUB cmdline as well, this is the result of the semi-better working than the default.

  Read the article

• Walkthrough/guide building aplication server for multi tenant web app [on hold]

  - by Khalid Adisendjaja

  The web app will detect a subdomain such as tenant1.app.com, tenant2.app.com, etc to identify tenant environment, each tenant environment will have a different database credential (port,db name,etc) but still connecting to the same database server. Each tenant should use app.com for their main domain, using their own domain is prohibitted. Each tenant will have their own rest api endpoint such as tenant1.app.com/api/v1/xxxx, tenant2.app.com/api/v1/xxxx, tenant3.app.com/api/v1/xxxx I've come to a simple solution by setting a wildcard subdomain (*.app.com) on webserver Apache/Nginx vhost configuration file. I have googled so many concept for building a multi-tenant app server but still don't understand how to really done it, what is the right way to do it and what is actually required to do this task. So I've come to this questions, Do I need a proxy server, dns masking, etc.. How to monitor each tenants activity What about server performance, load balancing, and scalability How to setup ssl certificate for each tenant what about application cache for each tenant Is it reliable to use the setup for production etc ... I have a very litte experience on server infrastructure, so I'm looking for a DIY walkthrough, step by step guide, or sophisticate solution ready to implemented for production

  Read the article

• sudo apt-get update error ubuntu 12.04

  - by user111172

  Hi I'm new in Linux and I need your help :) Every time when i type sudo apt-get update it shows: alphaog@alphaog-HP-Pavilion-DV7:~$ sudo apt-get update E: Type 'ain' is not known on line 3 in source list /etc/apt/sources.list.d/ricotz-testing-precise.list E: The list of sources could not be read. I tried gksu gedit /etc/apt/sources.list and put # in front third line but it still doesn't work. Please Help! :)

  Read the article

• How do I stop panning on a monitor that supports a specific resolution?

  - by IronicMuffin

  Hi all, I've been battling this for a few days now. Any and all help is appreciated. I have a planar monitor with a native res of 1280x1024. At one point, I had used PowerStrip to override "something" and set the res to 1600x1200, and it worked great. I then installed new intel graphics drivers for my 86895g (or w/e model) video card, which screwed up whatever settings I had. If I set it to 1600x1200 this time, it would set the res correctly, but give me a 1280x1024 viewport and the screen would pan when the mouse got to the edges of the screen. Absolutely not useful. Ok, so I was limited to 1280x1024 now. W/e. Now...enter new video card with two video ports. I have two monitors now and the latest nVidia drivers. I decide to try to get dual 1600x1200 going...ended up screwing the original monitor up so much now that it's at 1280x1024, with a 1024x768 viewport and panning! Absolutely not usable now. So what I need, and I can't seem to find on any forums, is help doing one or more of the following: Clearing out all monitor/edid info out of the windows registry without corrupting the registry. Actually correctly override the EDID values and get my sweet res back. Some other way of getting back to at least dual 1280x1024 with NO panning. Note: My device manager shows 4 monitors for some reason. My registry shows entries for all sorts of monitors that have been hooked up to the machine over the years. It's making it difficult to debug. Experience with PowerStrip would be helpful. I've been mucking with Phoenix EDID designer and MonInfo as well, but I'm stumbling around in the dark with these. Windows XP SP2 nVidia GeForce 6200 nVidia drivers: v258.96 Monitor: Planar PL 1910M Thanks!

  Read the article

• Read only file system error on ubuntu after partitioning

  - by Ranjith R

  I am not sure if I am the root cause of this problem but this is what I did: I wanted latest ubuntu and latest linux mint together on my thinkpad laptop. Windows 7 was already there. I already had mint. So I put in the USB with ubuntu image and started installing ubuntu. I chose to install side by side. It was taking a long time to finish defragmenting and partitioning. I decided to give up as I became a little impatient and I pressed the skip button. After the skipping, I realized that the partitioning was complete and went ahead with installing ubuntu. Now the linux mint OS starts reporting the file system as read only at least once every day and I have restart and tell the OS to fix errors in hard disk. After I press F key, the system fixes the issues, restarts and all is well again. Is there some way to fix the issue permanently. I think reinstalling will solve the issues, but I can not do it as I have a lot of data and I will have reinstall and configure a lot of softwares that I use daily. I checked the smart check in disk utility and the hard disk seems to be fine Also I checked both the partitions for errors with disk utility and the report says they are fine. Is there something I can do before I reinstall?

  Read the article

• Install grub on 2nd hard drive

  - by jldupont

  I have 2 HDs in my machine: Drive 1 with grub and my Windows XP OS Drive 2 with only Ubuntu 9.04 I would like to be able to boot directly from drive 2. I am missing grub on drive 2... how do I add it? EDIT: I ended up reinstalling the whole OS.

  Read the article

• default-display-manager error

  - by pwhy

  I was using gnome desktop manager, then I changed the file ./etc/X11/default-display-manager to nothing, so the login would be made via command line. The problem is that there's a file created in the same folder with the name default-display-manager~ But when I boot the pc gdm starts to load and never finishes. I tried to acess the shell via recovery mode but I'm not able to modify files. Please assist, I'm in chaos!

  Read the article

• Low graphics mode error on startup with NVIDIA graphics (12.04 LTS )

  - by champost

  My problem is similar to two other posts concerning ATI cards and 12.04 LTS: Post1 & Post2. In my case I use a Dell Precision M4300 laptop which uses a NVidia Quadro FX 880M. Doing a lspci | grep VGA gave me this: 01:00.0 VGA compatible controller: NVIDIA Corporation GT216 [Quadro FX 880M] (rev a2) My workaround consists of logging in at the console and running sudo start lightdm which works perfectly but I am looking for a better workaround than this ?

  Read the article

• I think installing PostFix solved my problem, but it seemed *too* easy

  - by Joel Marcey

  Hi, This is a followup to a serverfault post I made a while ago: http://serverfault.com/questions/21633/how-do-i-target-a-different-mail-server-depending-on-domain-with-exim (More context here too: http://forum.slicehost.com/comments.php?DiscussionID=3806 ) I have a slice/VPS at Slicehost. I basically decided to scrap exim (i.e., purge it), and start anew with my email infrastructure. In case you didn't read any of the above threads, basically my goal was to have a send only mail infrastructure that relays all outgoing email to Google Apps. I also wanted to where email from domain1 (a Wordpress installation) would show it coming from domain1.com and email from domain2 (a normal website) would show it coming from domain2.com. So I decided to give PostFix a try. I literally followed the surprisingly simple instructions here: http://sudhanshuraheja.com/2009/02/slicehost-setup-outgoing-mail-google-apps-postfix/ And voila, all seems to be working as I expected. My email tests show email coming from the proper locations (either domain1 or domain2 depending on where the emails were sent from). But this all seemed too simple to me. So simple, in fact, that I feel that something is amiss. When I installed PostFix according to the instructions in the post above and it worked, I was surprised that I didn't have to specify an SMTP server, a port number, any authentication credentials, etc. My slice is set up such that I have MX records for Google Apps (e.g., ASPMX.L.GOOGLE.COM.) in my DNS settings, but I am not sure if that is why it is working. My email infrastructure knowledge is admittedly limited, but with this am I suspect to: Spammers using my email infrastructure? My emails going to people as spam? Something else sinister? I have actually stopped running PostFix until I understand this better. Thanks!

  Read the article

• Is this a solution for having multiple SSL certificates on the same IP

  - by Saif Bechan

  I am running CentOS running on a VPS. I read some guides on having multiple SSL certificates on the same system, but I can not get the basics to work. The guide I got that makes the most sense to me is the doing the following. In CentOS I can make virtual NIC's. So I made 2 virtual NIC's to start with. 192.168.10.1, 192.168.10.2. Now I work in ISP manager Pro, so this is listening on my primary ip 1.1.1.1 For each website I have them listening on 192.168.10.1:80, 192.168.10.1:443 In the hosts file I made the following 2 entries 192.168.10.1 1st.com 192.168.10.2 2nd.com Now the strange thing is that when I browser to 1st.com I do not get the website located at 192.168.10.1, I get the website located at my prim IP 1.1.1.1 Should I do something like forwarding or routing for this setup to work? And the basic question: Will this setup even work? Are the SSL certificates based on the IP adress, or are the based on the host name, 1st.com and 2nd.com.

  Read the article

• Dual DVI external monitors from laptop using HDMI

  - by Andy Evans

  I know there may be a few questions similar to this, but my question is regarding specific hardware configuration. I have an Asus U52f laptop with an HDMI out that I currently use to drive my 24" DVI external monitor. My question is I found an HDMI - dual DVI splitter here and was wanting to know is has anyone tried this type of configuration or would the Matrox DualHead2Go be a better solution.

  Read the article

• Error loading PCX image in FreeImage library

  - by khanhhh89

  I'm using FreeImage in C++ for loading texuture from the PCX image. My FreeImage code is as following: FREE_IMAGE_FORMAT fif = FIF_UNKNOWN; //pointer to the image data BYTE* bits(0); fif = FreeImage_GetFileType(m_fileName.c_str(), 0); if (FreeImage_FIFSupportsReading(fif)) dib = FreeImage_Load(fif, m_fileName.c_str()); //retrieve the image data bits = FreeImage_GetBits(dib); //get the image width and height width = FreeImage_GetWidth(dib); height = FreeImage_GetHeight(dib); My problem is the width and height variable are both 512, while the bits array is an empty string, which make the following OPENGL call corrupt: glTexImage2D(m_textureTarget, 0, GL_RGB, width, height, 0, GL_RGBA, GL_UNSIGNED_BYTE, bits); While debugging, I notice that the "fif" variable (which contains the format of the image) is JPEG, while the Image is actually PCX. I wonder whether or not the FreeImage recognize the wrong format (from PCX to JPEG), so tha the bits array is an empty string. I hope to see your explanation about this problem. Thanks so much

  Read the article

• No HDMI audio - Windows 8 - ASUS H81M-PLUS

  - by Paul Wright

  I have an issue with HDMI audio on Windows 8 using an ASUS H81M-PLUS motherboard (without an external GFX card). There are many forum posts advising you to go into playback devices and setting HDMI to be default - I have done this. To eliminate what works and what doesn't work: I have not been able to get sound from my HDTV using HDMI. I have used this HDMI cable with my PS3, so this cable should be fine. I am able to use the HDMI cable in extended mode, so that I have two monitors (including the TV), just no audio. This HDMI cable goes straight from the motherboard to the TV. Below I have included 'Device manager', and 'Playback Devices' (Sound). Device Manager Playback Devices, showing disabled and disconnected devices I am at a loss. I have uninstalled all drivers, and then rebooted and made windows look for the correct ones, made sure the HDMI device was default. Thanks, Paul

  Read the article

• Error X3650 when compiling shader in XNA

  - by Saikai

  I'm attempting to convert the XBDEV.NET Mosaic Shader for use in my XNA project and having trouble. The compiler errors out because of the half globals. At first I tried replacing the globals and just writing the variables explicitly in the code, but that garbles the Output. Next I tried replacing all the half with float vars, but that still garbles the resulting Image. I call the effect file from SpriteBatch.Begin(). Is there a way to convert this shader to the new pixel shader conventions? Are there any good tutorials for this topic? Here is the shader file for reference: /*****************************************************************************/ /* File: tiles.fx Details: Modified version of the NVIDIA Composer FX Demo Program 2004 Produces a tiled mosaic effect on the output. Requires: Vertex Shader 1.1 Pixel Shader 2.0 Modified by: [email protected] (www.xbdev.net) */ /*****************************************************************************/ float4 ClearColor : DIFFUSE = { 0.0f, 0.0f, 0.0f, 1.0f}; float ClearDepth = 1.0f; /******************************** TWEAKABLES *********************************/ half NumTiles = 40.0; half Threshhold = 0.15; half3 EdgeColor = {0.7f, 0.7f, 0.7f}; /*****************************************************************************/ texture SceneMap : RENDERCOLORTARGET < float2 ViewportRatio = { 1.0f, 1.0f }; int MIPLEVELS = 1; string format = "X8R8G8B8"; string UIWidget = "None"; >; sampler SceneSampler = sampler_state { texture = <SceneMap>; AddressU = CLAMP; AddressV = CLAMP; MIPFILTER = NONE; MINFILTER = LINEAR; MAGFILTER = LINEAR; }; /***************************** DATA STRUCTS **********************************/ struct vertexInput { half3 Position : POSITION; half3 TexCoord : TEXCOORD0; }; /* data passed from vertex shader to pixel shader */ struct vertexOutput { half4 HPosition : POSITION; half2 UV : TEXCOORD0; }; /******************************* Vertex shader *******************************/ vertexOutput VS_Quad( vertexInput IN) { vertexOutput OUT = (vertexOutput)0; OUT.HPosition = half4(IN.Position, 1); OUT.UV = IN.TexCoord.xy; return OUT; } /********************************** pixel shader *****************************/ half4 tilesPS(vertexOutput IN) : COLOR { half size = 1.0/NumTiles; half2 Pbase = IN.UV - fmod(IN.UV,size.xx); half2 PCenter = Pbase + (size/2.0).xx; half2 st = (IN.UV - Pbase)/size; half4 c1 = (half4)0; half4 c2 = (half4)0; half4 invOff = half4((1-EdgeColor),1); if (st.x > st.y) { c1 = invOff; } half threshholdB = 1.0 - Threshhold; if (st.x > threshholdB) { c2 = c1; } if (st.y > threshholdB) { c2 = c1; } half4 cBottom = c2; c1 = (half4)0; c2 = (half4)0; if (st.x > st.y) { c1 = invOff; } if (st.x < Threshhold) { c2 = c1; } if (st.y < Threshhold) { c2 = c1; } half4 cTop = c2; half4 tileColor = tex2D(SceneSampler,PCenter); half4 result = tileColor + cTop - cBottom; return result; } /*****************************************************************************/ technique tiles { pass p0 { VertexShader = compile vs_1_1 VS_Quad(); ZEnable = false; ZWriteEnable = false; CullMode = None; PixelShader = compile ps_2_0 tilesPS(); } }

  Read the article

• Perl syntax error [closed]

  - by Linny

  I am a beginner taking a Perl programming course. We are trying to write a basic program for counting nucleotides in a DNA string. I'm getting syntax errors on the lines that have a single bracket on lines 28 & 70 and don't know why. It also reads that I have compilation errors. I have no idea where to start figuring that out. # The purpose of this program is to count the number of nucleotides in a strand. Each protein is counted separately # print "/n NOTE: Nucleotide counting /n"; # use strict; # enforce variable declarations use warnings; # enable compiler warnings # Display number of A,a,T,t,G,g,C,c, nucleotides in a word or sequence of letters. # my ($base) = ''; # an extracted letter from a string my ($nuceotide_count) = 0 ; # the current position within the word my ($position) = 0 ; # number of vowels in user-supplied word my ($word) = ''; # word to be processed my ($A_count) = 0 ; # of A nucleotides in the user-supplied sequence my ($a_count) = 0 ; # of A nucleotides in the user-supplied sequence my ($C_count) = 0 ; # of C nucleotides in the user-supplied sequence my ($c_count) = 0 ; # of C nucleotides in the user-supplied sequence my ($G_count) = 0 ; # of G nucleotides in the user-supplied sequence my ($g_count) = 0 ; # of G nucleotides in the user-supplied sequence my ($T_count) = 0 ; # of T nucleotides in the user-supplied sequence my ($t_count) = 0 ; # of T nucleotides in the user-supplied sequence word = (STDIN) for ($position = 0);($position if (($base eq 'a') or ($base eq 'A')) { ++$A_count; } # end if ++$position; if (($base eq 'T') or ($base eq 't')) { ++$T_count; } end if ++$position; if (($base eq 'G') or ($base eq 'g')) { ++$G_count; } # end if ++$position; if (($base eq 'C') or ($base eq 'c')) { ++$C_count; } # end if ++$position; } # end for # Display final results. # print " \n The number of A or a neucleotides is: $A_count"; print " \n The number of T or t neucleotides is: $T_count"; print " \n The number of G or g neucleotides is: $G_count"; print " \n The number of C or c neucleotides is: $C_count"; print " \n\n Program completed successfully. \n" ; exit ;

  Read the article

< Previous Page | 212 213 214 215 216 217 218 219 220 221 222 223  | Next Page >