Search Results

Search found 16748 results on 670 pages for 'port block'.

Page 216/670 | < Previous Page | 212 213 214 215 216 217 218 219 220 221 222 223  | Next Page >

• Can a consumer wireless router act as both a wireless client and access point?

  - by glibdud

  I'm going to be moving in the future, and integrating my home network into that of my landlord. I wish to maintain an isolated network while using his internet connection, so I'm planning on cascading my router off of his (WAN-to-LAN type configuration). Unfortunately, it looks like it might not be feasible to run a wire between the two. Therefore, I'd like to send my WAN connection over WiFi to his router. At my disposal, I have a WRT54GL (running Shibby's Tomato mod), and I just bought an Asus RT-N66U (I can be flexible with the firmware). My first thought was to set up the WRT as a wireless bridge, then run a wire between that and the N66U's WAN port. I'm reasonably sure I could make that work, but can I eliminate the WRT from the equation altogether? Can the N66U connect to the landlord's WiFi as a client, effectively using that as the WAN port, while simultaneously providing wireless access to my devices on an altogether different WLAN?

  Read the article

• installed mongo using brew but stuck at prompt

  - by user50946

  I have installed mongo using brew on my mac. When I give mongo command I see this MongoDB shell version: 2.4.6 connecting to: test but it stays there and never give me command prompt back anyone else noticed something like this I have reinstalled with no luck. The issue is persistent thanks Logs ***** SERVER RESTARTED ***** Fri Oct 18 08:11:48.360 [initandlisten] MongoDB starting : pid=2081 port=27017 dbpath=/usr/local/var/mongodb 64-bit host=Asims-MacBook-Air.local Fri Oct 18 08:11:48.360 [initandlisten] db version v2.4.6 Fri Oct 18 08:11:48.360 [initandlisten] git version: nogitversion Fri Oct 18 08:11:48.360 [initandlisten] build info: Darwin minimountain.local 12.5.0 Darwin Kernel Version 12.5.0: Sun Sep 29 13:33:47 PDT 2013; root:xnu-2050.48.12~1/RELEASE_X86_64 x86_64 BOOST_LIB_VERSION=1_49 Fri Oct 18 08:11:48.360 [initandlisten] allocator: tcmalloc Fri Oct 18 08:11:48.360 [initandlisten] options: { bind_ip: "127.0.0.1", config: "/usr/local/etc/mongod.conf", dbpath: "/usr/local/var/mongodb", logappend: "true", logpath: "/usr/local/var/log/mongodb/mongo.log" } Fri Oct 18 08:11:48.361 [initandlisten] journal dir=/usr/local/var/mongodb/journal Fri Oct 18 08:11:48.361 [initandlisten] recover : no journal files present, no recovery needed Fri Oct 18 08:11:48.398 [websvr] admin web console waiting for connections on port 28017 Fri Oct 18 08:11:48.398 [initandlisten] waiting for connections on port 27017 Fri Oct 18 08:12:03.279 [signalProcessingThread] got signal 1 (Hangup: 1), will terminate after current cmd ends Fri Oct 18 08:12:03.279 [signalProcessingThread] now exiting Fri Oct 18 08:12:03.279 dbexit: Fri Oct 18 08:12:03.279 [signalProcessingThread] shutdown: going to close listening sockets... Fri Oct 18 08:12:03.279 [signalProcessingThread] closing listening socket: 9 Fri Oct 18 08:12:03.279 [signalProcessingThread] closing listening socket: 10 Fri Oct 18 08:12:03.280 [signalProcessingThread] closing listening socket: 11 Fri Oct 18 08:12:03.280 [signalProcessingThread] removing socket file: /tmp/mongodb-27017.sock Fri Oct 18 08:12:03.280 [signalProcessingThread] shutdown: going to flush diaglog... Fri Oct 18 08:12:03.280 [signalProcessingThread] shutdown: going to close sockets... Fri Oct 18 08:12:03.280 [signalProcessingThread] shutdown: waiting for fs preallocator... Fri Oct 18 08:12:03.280 [signalProcessingThread] shutdown: lock for final commit... Fri Oct 18 08:12:03.280 [signalProcessingThread] shutdown: final commit... Fri Oct 18 08:12:03.282 [signalProcessingThread] shutdown: closing all files... Fri Oct 18 08:12:03.282 [signalProcessingThread] closeAllFiles() finished

  Read the article

• How to use postfix header_checks with zarafa outgoing mail

  - by olvrlrnz

  I'm using zarafa as MDA with postfix. For privacy reasons I want to filter client internal IP-addresses and stuff like this. To do so I've added the following to master.cf: submission inet n - - - - smtpd [...] -o cleanup_service_name=subcleanup [...] and further down the file: subcleanup unix n - - - 0 cleanup -o header_checks=pcre:/etc/postfix/smtp_header_checks which works perfectly for clients delivering their mail through the submission port. But my zarafa is of course not using the submission port to send mail, hence it doesn't hit the subcleanup routine and outgoing mails contain a very nice X-Mailer: Zarafa-exact_version header which is rather unsatisfying. Is there any way to make zarafa use the subcleanup routine? Any help is much appreciated.

  Read the article

• Cannot start IIS on XP64 Professional

  - by headsling

  I have enabled the iis components for the first time on this machine, from control panel-add software-windows components, and rebooted. When I attempt to start the "Default Web Site" (which shows as 'Default Web Site (Stopped)' ) from inetmgr nothing happens.. no errors, nothing in the event log. Regmon and Filemon show no obvious errors. I've confirmed that nothing is running on port 80 and have tried changing the local port (8080, 8081 etc.,) with no effect. Further info -- I have removed the install, rebooted, added it back in, rebooted ... still not working. I have visual studio 2008, SQLServer 2008 installed.

  Read the article

• Does a single LACP channel over multiple switches increase redundancy?

  - by Sirch

  I am curious for opinions, findings, or evidence that having multiple interfaces bonded using LACP to ports in multiple switches can increase redundancy. Previously bonded interfaces have always been to a single switch, with a redundant channel to another port. Without getting into vendor specifics, my thought is that as this is a single LACP, the likelihood that an event or change could lead to a wide service outage. Without having the spare equipment or time to test this single channel over diverse switches, could anyone with a greater networking knowledge than myself, tell me if there a network side event that would bring down the network connectivity to a server that had created a bonded interface to two ports on separate switches? Does the use of bonded ethernet channels across multiple switches (that we are advised that we can use) from the server, provide both improved throughput (unquestionably), and improved redundancy (uncertain). Could/would network events such as switch failure, port migration, patching, recovery, etc, cause the channel for both server network interfaces to be unavailable? Thanks in advance.

  Read the article

• Dealing with SMTP invalid command attack

  - by mark

  One of our semi-busy mail servers (sendmail) has had a lot of inbound connections over the past few days from hosts that are issuing garbage commands. In the past two days: incoming smtp connections with invalid commands from 39,000 unique IPs the IPs come from various ranges all over the world, not just a few networks that I can block the mail server serves users throughout north america, so I can't just block connections from unknown IPs sample bad commands: http://pastebin.com/4QUsaTXT I am not sure what someone is trying to accomplish with this attack, besides annoy me. any ideas what this is about, or how to effectively deal with it?

  Read the article

• Xen find VBD id for physical disks

  - by Joe

  I'm starting a xen domU using xm create config.cfg. Within the config file are a number of physical block devices (LVs) which are added to the guest and can be accessed fine when it boots. However, at a point in the future I need to be able to hot unplug one of these disks using the xm block-detach command. This command, however, requires the vbd id of the device to be detached and I can't find a way to find the device id for a particular disk 'plugged in' at start up. Any help is much appreciated!

  Read the article

• What's a good tool for checking from my own machine that my server is up?

  - by chico

  I'm looking for a good tool (web site or not) that I can use to do a simple check whether my web server is accessible from outside LAN (it's serving in a non-standard port). To give some context, I've gone through this problem: can't access my ip from outside. Even the tools I've found are not really working. Currently to fetch the html I serve with the online bash tool I do: curl <my ip>:<my port> \ | sed 's/&/\&amp;/g; s/</\&lt;/g; s/>/\&gt;/g; s/"/\&quot;/g; s/'"'"'/\&#39;/g' I'm looking for a simple tool that can display the html properly, or just show raw text without resorting to sed html escaping and curl.

  Read the article

• How do you know where macports installs python packages to?

  - by xmaslist

  I am running macports to install scipy and such on OS X leopard with python 2.7. The install runs successfully, but running python and trying to import the packages I've installed, they're not found. What I'm running is: sudo python_select python27 sudo port install py27-wxpython py27-numpy py27-matplotlib sudo port install py27-scipy py27-ipython Opening up python in interactive mode (it is the correct version of python), I type 'import scipy' and get a module not found error. What gives? How can I find out where it is installing the packages to instead?

  Read the article

• Reasons for firewall alerts from ICMPv6 Local Link Address unreachable?

  - by Pulse

  For some reason I'm receiving numerous alerts, for a variety of processes, from my firewall. These are all related to ICMPv6 and are the same, apart from the process for which the alert was generated. 'Application/Process' Is trying to Access the Internet Remote Address - fe80::7191:6bd1:e5fa:58af [The Link Local Address] ICMP Type = 1 [Destination Unreachable] ICMP Code = 3 [Address Unreachable] Protocol = ICMPv6 Allow or Block If I Allow or Block, the alert never reoccurs. I understand what the various elements of these messages represent, I just can't fathom out why they are being generated. What could be the reason for these Alerts? OS - Windows 7 x86 Ultimate Thanks

  Read the article

• HD Radeon 6950 cannot run multiple monitors

  - by Bryan S.

  I'm having troubles getting multiple monitors to run on my graphics card. I plug one via the hdmi, and one into the DVI (I have tried both available DVI ports). with one DVI port it does not even register the monitor, with the second one I go into the Catalyst Control Center and it gives me the option to swap between the HDMI and the DVI port. I guess since this is the flex edition I could just go get 2 DSP to HDMI converters, plug 2 monitors in through the available DSP, and than the 3rd one into the HDMI, but do you have any idea why it will not let me run one HDMI and one DVI?

  Read the article

• Multiple subnets behind SonicWall TZ 180

  - by Derek

  We have a SonicWall TZ180 that acts as a VPN endpoint. Right now it has one WAN IP address and a /24 assigned to the LAN interface. Our mail cluster administrator asked if it was possible to add a second private class C behind the VPN. This second subnet would be available to the other network and then we would use address objects and acls to limit access. Is this possible? I read up on PortShield but I don't know if that's what we would need to use because we're pushing all data out of one physical port into a Cisco switch that has VLANs already set up. Addendum: It appears that PortShields will do what I want with only one limitation; it requires a direct 1-1 relationship of portshield to physical port. This would then limit us to 4 PortShields on 1 TZ180. Is there a better solution than this?

  Read the article

• DisplayPort to DVI not working on Quadro FX 580

  - by kaosvid

  I have a PNY NVIDIA Quadro FX 580 graphics card with 1x DVI and 2x DisplayPorts. The DVI port works fine with both my Viewsonic monitors but I cannot get either of the DPs to work using the supplied DP to DVI adapter; all I get is a "no signal" on either monitor when connected to either DP port. The NVIDIA Control Panel shows that the second monitor is not connected when in fact it is. How do I get the second monitor to work? System: Windows XP Professional 32-bit Asus P5Q motherboard Core 2 Duo E8500 CPU 4GB PC8500 RAM

  Read the article

• Returning "200 OK" in Apache on HTTP OPTIONS requests

  - by i..

  I'm attempting to implement cross-domain HTTP access control without touching any code. I've got my Apache(2) server returning the correct Access Control headers with this block: Header set Access-Control-Allow-Origin "*" Header set Access-Control-Allow-Methods "POST, GET, OPTIONS" I now need to prevent Apache from executing my code when the browser sends a HTTP OPTIONS request (it's stored in the REQUEST_METHOD environment variable), returning 200 OK. How can I configure Apache to respond "200 OK" when the request method is OPTIONS? I've tried this mod_rewrite block, but the Access Control headers are lost. RewriteEngine On RewriteCond %{REQUEST_METHOD} OPTIONS RewriteRule ^(.*)$ $1 [R=200,L]

  Read the article

• No remote access to PostgreSQL db

  - by gattol

  i'm stuck in connecting to a PostresSQL database from remote host. The server is accepting incoming connections on port 5432 and i've configured pg_hba.conf like this: local all all md5 host all all 0.0.0.0/0 md5 and the postgresql.conf like this: listen_addresses = '*' port = 5432 max_connections = 100 I don't have any problem accessing from local but when i try to connect via psql with something like this: psql -U myuser -h hostname db_name I get this error: psql: FATAL: no pg_hba.conf entry for host "87.zz.yy.xxx", user "myuser", database "db_name", SSL off I also tried to put the host 87.zz.yy.xxx in the pg_hba.conf file without success.

  Read the article

• Throwing TRIM support in Ubuntu guest at Win7-Virtualbox host

  - by user141472

  I have VirtualBox 4.1.14 on Windows 7 as host, and Ubuntu server 11.10 as guest. System was installed at traditional HDD years ago (and upgraded later), but now it's at SSD as expanding drive. There is "AHCI" and "it's SSD" features enabled in SATA controller. Problem is, this expanding drive growth to it's almost max size (90% of it), but actually in VM only about 50% spent. Also, guest VM does not recognize /dev/sda as SSD, /sys/block/sda/queue/rotational says "1", /sys/block/sda/queue/discard_* all says "0". And, of course, I cannot run fstrim /, it says that operation not supported. Is there some trick to enable TRIM support in my guest system without reinstalling it?

  Read the article

• What does directory permission 'S' mean? (not lower case, but in upper case)

  - by Howard Guo

  I downloaded Eclipse, uncompressed it, did a few other things and all sudden I notice this interesting behaviour: ^_^ ~/Downloads > sudo chmod 0000 eclipse/ ^_^ ~/Downloads > stat eclipse/ File: 'eclipse/' Size: 4096 Blocks: 8 IO Block: 4096 directory Device: 801h/2049d Inode: 529725 Links: 9 Access: (2000/d-----S---) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2012-11-22 19:54:57.752017352 +1100 Modify: 2012-09-20 18:16:26.000000000 +1000 Change: 2012-11-22 20:07:49.354016510 +1100 Birth: - ^_^ ~/Downloads > sudo chmod 0755 eclipse/ ^_^ ~/Downloads > stat eclipse/ File: 'eclipse/' Size: 4096 Blocks: 8 IO Block: 4096 directory Device: 801h/2049d Inode: 529725 Links: 9 Access: (2755/drwxr-sr-x) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2012-11-22 19:54:57.752017352 +1100 Modify: 2012-09-20 18:16:26.000000000 +1000 Change: 2012-11-22 20:08:19.042016478 +1100 Birth: - What does 'S' permission mean to a directory? And why it doesn't let me get rid of it? Thanks.

  Read the article

• Having internet on a VirtualBox

  - by S4M

  I am running a linux laptop and I set up a VirtualBox under windows XP. My only problem is the VirtualBox doesn't seem to be connected to internet - When I do the connection diagnosis it tells me there is no connection. I am using an NAT adapter, and I bind the port 80 from my computer to the port 80 of the VirtualBox, and same for the ports 8080, but still no result. I would be grateful is someone could help me to sort this out. EDIT: thinking of it, what is making the problem hard - and painful - is the absence of error message. If I try to use a given adapter to share my computer's connection with the VirtualBox, and it doesn't work, I have no way to know why. So, it would be really helpful if someone could share a way to access this king of information (is there a log file somewhere or a way to run VirtualBox from command line in a verbose mode?).

  Read the article

• How to failover to local account on a cisco switch/router if radius server fails?

  - by 3d1l

  I have the following configuration on a switch that I testing for RADIUS authentication: aaa new-model aaa authenticaton login default group radius local aaa authentication enable default group radius enable aaa authorization exec default group radius local enable secret 5 XXXXXXXXX ! username admin secret 5 XXXXXXXXX ! ip radius source-interface FastEthernet0/1 radius-server host XXX.XXX.XXX.XXX auth-port 1812 acct-port 1813 key XXXXXXXXX radius-server retransmit 3 ! line con 0 line vty 5 15 Radius authentication is working just fine but if the server is not available I can not log into the router with the ADMIN account. What's wrong there? Thanks!

  Read the article

• How do you reset the range of available ports that libvirt autoport can use?

  - by bcmcfc

  Libvirt is using its autoport setting to automatically allocate ports within a range starting at 5900. Example excerpt from an XML configuration for a VM: <graphics type='spice' port='6000' autoport='yes' listen='127.0.0.1' keymap='en-gb'> <listen type='address' address='127.0.0.1'/> </graphics> Currently, there are free ports at various points within the range 5900 to 5999. However, newly booted VMs are picking up ports from 6000 on. I need for it to reuse the available ports in the 59xx range. Is this possible? If so, how do I do this? The problem arose because VMs are being accessed via websockets, and it tried to use 6000 which is a reserved port for X11. A solution that explains how to blacklist ports from being picked up by autport would also be sufficient.

  Read the article

• Removing integrated video card drivers broke other hardware?

  - by jsnlxndrlv

  I just purchased and installed an XFX ATI Radeon HD 4650 video card. The installation instructions said to remove the old video card drivers before installing the new driver. I did both things, but now every time I start my computer, the Found New Hardware wizard pops up for the following three devices: PCI Device SM Bus Controller Other PCI Bridge Device Furthermore, my LAN port no longer functions. The cable's connected, and the light on the port comes on, but the computer can't find any servers when I attempt to connect with it. The modem and router are working, and obviously I'm able to use the other computer here to post this. What do I do to fix this?

  Read the article

• WebsitePanel 2 totally NOT working on Windows Server 2012 on Azure

  - by Carmine Giangregorio

  I’m having many troubles installing WebSitePanel on an Azure Virtual Machine, with Windows Server 2012. I followed the steps in http://www.websitepanel.net/documentation/deployment-guide/server-configuration/preparing-windows-server-2008-r2-for-websitepanel-installation/ and installed everything I needed. Then, I installed the WebSitePanel Standalone Server package with the installer. I opened the endpoint for the port 9002 on Windows Azure; so I pointed my browser to myhostname.cloudapp.net (note: in Azure you don’t have a static IP address, instead you have an hostname like [hostname].cloudapp.net). So, loading myhostname.cloudapp.net:9002 fails, and any browser shows something like “Unable to load page”. Notice: if I try to load the WebSitePanel Portal directly on the server, I get an error HTTP 400 Bad Request. How come? IIS works perfectly on the server, in fact the default website runs without problems on port 80.

  Read the article

• Logging the client IP with Nginx/Varnish/Apache

  - by jetboy

  I have Nginx listening on port 443 as an SSL terminator, and proxying unencrypted traffic to Varnish on the same server. Varnish 3 is handling this traffic, and traffic coming in directly on port 80. All traffic is passed, unencrypted, to Apache instances on other servers in the cluster. The Apache instances use mod_rpaf to replace the logged client IP with the contents of the X-Forwarded-For header. My problem is that if the traffic is coming via Nginx, while the 'correct' client IP is getting logged in the VarnishNCSA logs, it looks as if Varnish is (understandably) replacing Nginx's X-Forwarded-For header with 127.0.0.1 downstream, and this is getting logged with Apache. Is there a nice simple way to stop Varnish rewriting X-Forwarded-For if it's already populated?

  Read the article

• Amazon EC2 Socket connection not being accepted

  - by Joseph

  I am trying to run a java application on my EC2 instance. The application accepts socket connections on port 54321. If I try and connect to it, it times out. My Security Group is set as: TCP Port (Service) Source Action 21 0.0.0.0/0 Delete 22 (SSH) 0.0.0.0/0 Delete 80 (HTTP) 0.0.0.0/0 Delete 20393 0.0.0.0/0 Delete 54321 0.0.0.0/0 Delete Is there anything else I need to do? # iptables -nvL Chain INPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination # iptables -nvL -t nat Chain PREROUTING (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain INPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain POSTROUTING (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination #

  Read the article

• Snort monitoring of spanning interface

  - by aHunter

  I have configured a Cisco 3500 switch with a port SPAN and have my snort node (fedora 13) plugged into it. I am running snort as a daemon and have configured a rule to log all tcp traffic but I am only seeing traffic with a destination of the snort node. I know that the SPAN port is working and wanted to know if there is a specific option that I needed to start snort with in order for it to pickup all the traffic? Or is there something that I have missed here? Many thanks.

  Read the article

< Previous Page | 212 213 214 215 216 217 218 219 220 221 222 223  | Next Page >