Search Results

Search found 12497 results on 500 pages for 'linked servers'.

Page 217/500 | < Previous Page | 213 214 215 216 217 218 219 220 221 222 223 224  | Next Page >

  • Is it possible/advisable to run VMware Server ESX/ESXi on a laptop?

    - by cletus
    The idea of having a small footprint hypervisor as the primary OS on a laptop or desktop where every "real" OS is a guest appeals to me. Now I realize this software is more typically used on blades and the other servers but can it be done on a normal PC? Should it be? What requirements are there (eg hardware/BIOS/chipset)? Is there a performance impact for doing so? Is it a good/bad idea?

    Read the article

  • Looking for a way to diff many server's filesystem

    - by Itai Ganot
    There's a motivation in my office to make sure that all file systems on all servers in the production environment (It's a Windows environment) are identical until the last file and i'm looking for a program/tool which can help me achieve this goal. What i actually look for is a tool that will allow me to diff server's file systems by connecting them remotely (as they are spreaded around the world). Anyone knows a tool which allows it?

    Read the article

  • How does Ubuntu keep track of the "System restart required" flag in motd?

    - by Anders Lindahl
    I have a few Ubuntu servers (8.10, 9.10) that is set to automatically install security updates. Some times these updates requires a restart of the system, and this string is shown in motd: *** System restart required *** To get a notice about these, I plan to write a Nagios test to monitor if the server is in need of a reboot. So, my question: Is there a better way than parsing /etc/motd to find out if a reboot is needed?

    Read the article

  • Does ZFS replace the need for hardware/software RAID?

    - by user53744
    I want to provide protection against data loss on my servers. Typically, I'd use hardware RAID 1 or 5, but I've been reading up on ZFS. Is it correct that ZFS itself provides RAID 1 or 5 like data protection WITHOUT needing a RAID controller card? If so, I assume a single hard drive is not enough to provide data protection since if that drive fails, all data fails, so how many hard drives do I need to be running for ZFS to provide this protection?

    Read the article

  • Can I change the language of internal website in SBS 2008?

    - by kyrisu
    Hi, I like to manage my servers in English but my client is Polish. Is there a way to keep the main language of the server in English but get "Company Web"/OWA/Remote Access website and other publically accessible parts in Polish? P.S. I've already installed WSS language pack - this is not the issue, the issue is to have "Company Web" and other portal contents in Polish.

    Read the article

  • Why is my SSH session timing out in less than a minute?

    - by John Smith
    Within a minute of connecting to my remote Linux server through SSH, my session times out and I cannot contact the server until a few seconds have passed. Meanwhile, I'm connected to other servers without interruption. This is only happening when I establish connection from an hotel wireless AP. When I connect from my phone's Internet, the problem does not occur. Does anyone know what might be causing these unusual timeouts?

    Read the article

  • Using the internet connection of a Remote Desktop

    - by hattenn
    I want to use the internet connection of the servers at my university. I have a remote desktop account, and I have tried setting up VPN, but all VPN or proxy server software I could think of was blocked. Windows' built in VPN is blocked too. When I go to "Change Adapter Settings" and click on "File-New Incoming Connection", it says "Access denied." What would your suggestion be to use the internet connection of the remote desktop?

    Read the article

  • Self Ad serving for Linux server

    - by protecttheweb
    I am looking for ad serving software to serve my own ads. I am a newbie and just want your recommendation. Yes, I know about Google DFP but I want something non Google or something open source or for Linux servers. I want something kind of automatic like advertisers add the banner images or test ads and pay and ads are automatically served or can be set to draft until set to live. What recommendation do you have?

    Read the article

  • Logging commands executed by remote shell scripts

    - by user145836
    I've noticed that when running a script that connects to a number of our servers (to essentially run batch commands) that the commands aren't logged in the user's .sh_history or .bash_history files. Is there a place where this is logged (assuming the script itself isn't doing the logging and I'm not tee'ing the output anywhere)? I'm talking specifically about AIX, but I would assume this question applies to all the *nix flavors. Thanks!

    Read the article

  • Monitoring apache's caching.

    - by Synchro
    I'm running mod_mem_cache with mod_cache, but I don't seem to have any way of telling whether images are served from the cache or not, so I can't tell how well it's working. Is there some way of seeing via mod_status, adding cache status headers to responses or similar? The servers it's on are quite happily handling sustained loads of about 200 requests/sec, but I can't tell if/how much the caching is helping that.

    Read the article

  • Opscode Chef Ohai plugin - How to get a custom plugin to run automatically?

    - by JDS
    The Ohai docs are incomplete. Here's what I've been able to do so far: I've created a custom plugin that adds one piece of node data called "my_custom_data" it works when I load it manually in IRB I've used the Ohai cookbook to get it loaded on the servers that need it However, Ohai doesn't load it, neither during Chef runs nor if I run Ohai manually. The docs, here, are of little use in answering this question. http://docs.opscode.com/ohai.html

    Read the article

  • default page in pnp4nagios

    - by bluszcz
    I am using pnp4nagios along with the nagios. Everything seems to be integrated properly - I have "extra action" icons close to every host and service which links to pnp4nagios graph. However, when I am going to the https://x.x.x.x/pnp4nagios/ it always change the url to the: https://x.x.x.x/pnp4nagios/graph?host=webhost01 How Can I turn off this behaviour? I would like to see on /pnp4nagios/ collected graphs from all servers.

    Read the article

  • Setting http auth type in phpMyAdmin on Debian

    - by Daniel Hollands
    I'm trying to set-up the fresh phpMyAdmin install on my Debian 6 server to use http authentication rather than the cookie based auth that is default when it is installed. To do this, I edited the $cfg['Servers'][$i]['auth_type'] line to use 'http' as its setting in /etc/phpmyadmin/config.inc.php, and restarted the server, but the setting seems to be being ignored, as when I goto phpmyadmin, it is still offering up the regular login box. I've done this twice before (once on debian and once on ubuntu), so I'm not sure why it isn't working this time. Thank you

    Read the article

  • [Nameservers] Can I setup 5 ips to 1 server and have only 2 nameservers?

    - by Tyler
    So I have 1 computer with 5 IP's and around 15 sites being hosted. I have 4 of the ips setup to be dedicated for 4 sites and the rest share the 5th ip. When I'm setting up my name server, do I set it up at Godaddy my Registar or on my server's dns or both? Can I just setup NS1 - Add all the ips NS2 - Add all the ips And just have all the sites use those two name servers?

    Read the article

  • How can I determine which switch the Infiniband subnet manager is running on?

    - by ajdecon
    I recently inherited an Infiniband network containing multiple switches, and I know that one of these switches is running the subnet manager. The rest supposedly have that feature turned off, or were never enabled. The trouble is, I have no idea which one it is... I'd like to replace the switch subnet manager with OpenSM running on a couple of my infrastructure servers. Is there any way, short of logging into each switch individually, to determine which switch is running the SM?

    Read the article

  • Benefits to private networks between virtual machines on an ESXi host?

    - by arex1337
    I'm planning this development environment with a few database servers, and originally thought I would have a few private networks. I then thought it might be unnecessary as the ESXi cluster already provides redundancy with 4 NICs (in my case) and should manage the network traffic pretty intelligently, right? Two private networks Zero private networks What are the advantages/disadvantages between the two shown configurations - on an ESXi 4.1 host?

    Read the article

  • Local and public IPs on the same switch?

    - by Andrew
    It's all pretty much in the title. Is it possible to assign both local and public IPs to different nodes connected to the same switch? I have 4 servers with 2 gigabit ethernet ports each. I want one of each to have a public IP, and the remaining ports to have local IPs for server-to-server traffic. Sorry if it's a dumb question. I didn't see anything about it on here already.

    Read the article

  • PuTTY - Server Unexpectedly Closed Network Connection

    - by Austin
    I have two servers that I have been able to connect fine as s1.website.com and s2.website.com I connected to s1.website.com earlier today without any issues, however, when I connected to s2.website.com it gave me the "Server Unexpectedly Closed Network Connection" I have researched this elsewhere and someone concluded it to a "brute force attempt" However, I know this is not the case. If anyone else has had this issue please let me know. Thanks

    Read the article

  • Apache certificates for some urls not working

    - by Vegaasen
    We are having a rather strange problem with a Apache-installation. Here is a short summary: Currently I'm setting up Apache with https, and server-certificates. This is fairly easy and works straight out of the box - as expected. This is the configuration for this setup: Listen 443 SSLEngine on SSLCertificateFile "/progs/apache/ssl/example-site.no.pem" SSLCertificateKeyFile "/progs/apache/ssl/example-site.no.key" SSLCACertificateFile "/progs/apache/ssl/ca/example_root.pem" SSLCADNRequestFile "/progs/apache/ssl/ca/example_intermediate.pem" SSLVerifyClient none SSLVerifyDepth 3 SSLOptions +StdEnvVars +ExportCertData RequestHeader set ssl-ClientCert-Subject-CN "%{SSL_CLIENT_S_DN}s" RewriteEngine On ProxyPreserveHost On ProxyRequests On SSLProxyEngine On ... <LocationMatch /secureStuff/$> SSLVerifyClient require Order deny,allow Allow from All </LocationMatch> ... <Proxy balancer://exBalancer> Header add Set-Cookie "EX_ROUTE=EB.%{BALANCER_WORKER_ROUTE}e; path=/" env=BALANCER_ROUTE_CHANGED BalancerMember http://10.0.0.1:7200 route=ee1 retry=300 flushpackets=off keepalive=on BalancerMember http://10.0.0.2:7200 route=ee2 retry=300 flushpackets=off keepalive=on status=+H ProxySet stickysession=EX_ROUTE scolonpathdelim=Off timeout=10 nofailover=off failonstatus=505 maxattempts=1 lbmethod=bybusyness Order deny,allow Allow from all </Proxy> RewriteCond %{REQUEST_URI} !^/index.html [NC] RewriteRule ^/(.*)$ balancer://exBalancer/$1 [P,NC] ProxyPassReverse / balancer://exBalancer/ Header edit Set-Cookie "(.*)" "$1;HttpsOnly" ... So - everything works fine and as expected for all of the pages that are not a part of the LocationMatch-directive. When requesting something that matches the LocationMatch-directive, I'm asked for a certificate (hence the SSLVerifyClient required attribute) - and getting all the correct certificates in my browser that is based on the root/intermediate chain. After choosing a certificate and clicking "OK", this is what pops up in the apache logs: [ssl:info] [pid 9530:tid 25] [client :43357] AH01998: Connection closed to child 86 with abortive shutdown ( [Thu Oct 11 09:27:36.221876 2012] [ssl:debug] [pid 9530:tid 25] ssl_engine_io.c(1171): (70014)End of file found: [client 10.235.128.55:45846] AH02007: SSL handshake interrupted by system [Hint: Stop button pressed in browser?!] And this just spams the logs. What is happening here? I can see this configuration working on my local machine, but not on one of our servers. There is no configration differences between the servers, only minor application-wise-changes. I've tried the following: 1) Removing CA-certificate-checking (works) 2) Adding required CA-certificate for the whole site (works) 3) Adding "SSLVerifyClient optional" does not work 4) ++ Server/Application Information Local: -OpenSSL v.1.0.1x -Apache 2.4.3 -Ubuntu -mpm: event -every configuration should be turned on (failing) server: -OpenSSL 0.9.8e -Apache 2.4.2 -SunOS -mpm: worker -every configuration should be turned on Please let me know if more information is needed, I'll provide it instantly. Brief sum-up: -Running apache 2.4 -Server certificates works just fine -Client certificates for some /Locations does not work, fails with errors PS: Could it be related with the OpenSSL version and the "Renegotiation" stuff related to TLS/SSLv3?

    Read the article

  • Win2003 R2 - 1.5TB disks not identified

    - by JohnyD
    I just installed 4 1.5TB hard disks (WD) in two servers (2 in each). Upon reboot they are not showing up in the disk manager whatsoever. I'm running Windows Server 2003 EE (32bit) with 8GB ram. They both currently have mirrored 300GB sata disks. Why aren't they being recognized? Is there a disk size limit for win2k3 r2?

    Read the article

  • Can I set up a different method of authentication on Nagios?

    - by cwd
    Nagios is a wonderful too for monitoring servers. Their web interface is not bad, either. However I am not crazy about using the HTTP Authentication that comes standard. Is there a way to use another method of authentication? (and I don't mean restricting access by IP address in the .htaccess file) Something with a form-based login would be wonderful, but perhaps there is no such thing. I'm hoping you guys have found something I haven't.

    Read the article

  • Can I extend my monitors, mouse, keyboard accross a room?

    - by jasondavis
    I am considering building my next PC into a server rack case, the reason is I am getting a server cabinet and will be putting in a few servers in it. It will be in my room where I use my main PC as well and in my case it just makes sense to build my next PC into this cabinet/rack. So my main concern, will I be able to extend my mouse, keyboard, and 2-3 monitors10-15 feet accross a room from my server rack to my desk?

    Read the article

  • IIS - Script for repeated hacks on a website

    - by dodegaard
    I currently have a site that is armored by ELMAH as its reporting mechanism. Each time someone hits a URL that is incorrect it notifies me or logs to the system. This is annoying for someone fat-fingering the URL with a misspelling but great when a hacker is trying to crack a site of mine. Has anyone ever written a script for IIS 7 on Win 2K8 that blocks an IP based on repeated attempts to hit a website? I've looked at Snort and other IDS systems but if I could get a script that could be linked to my ELMAH system it might be the perfect thing. PowerScript, etc. is what I was thinking. Hints and recommendations are wonderful and if you think a true intrusion detection system is recommended give me your ideas. Thanks in advance.

    Read the article

  • W3WP Process at 100% Utilization

    - by Shane Fulmer
    We're seeing an issue on our production servers where the processor is constantly at 100% utilization (between 2 or 3 w3wp processes). The weird thing is that there are almost no requests to the server, and the application associated with the offending processes is still performing well. By looking at IISPeek, almost nothing is happening on the server, so I'm not sure what else to check. Has anyone run into something like this? Thanks!

    Read the article

< Previous Page | 213 214 215 216 217 218 219 220 221 222 223 224  | Next Page >