Search Results

Search found 7291 results on 292 pages for 'runtime exec'.

Page 217/292 | < Previous Page | 213 214 215 216 217 218 219 220 221 222 223 224  | Next Page >

  • Random “Lost connection to MySQL server at 'reading initial communication packet', system error: 0”

    - by user1606545
    Sometimes I get the error from MYSQL server: Lost connection to MySQL server at 'reading initial communication packet', system error: 0 I cannot find the cause, since most of the time it works, but every week for some hours I get this error. I googled, but there seem to be only users which have this error permanently. But in this case, it only occurs sometimes. I checked hosts.allow and hosts.deny, but the host is allowed and not denied. Also sometimes I get the error: File './database/table.MYD' not found (Errcode: 24) It occurs very rarely. But it occurs for some hours once a week, sometimes on multiple days, but suddenly the problem disappears again. I have checked the open files limit. It's 2048 and should be absolutely enough. I also tried to increase the number of open files nevertheless, but no effect. I thought, perhaps the process does not close some tables. But this is impossible, because after a while everythings o.k. again and the process opens maximum 100 tables at once. I also checked the MySQL-runtime-environment, and there were 930 opened files. I cannot explain that. After a while it's 129. I am running a MySQL-Server on a SUSE-Linux machine. I connect to the MySQL-Server from another host by the command line tool "mysql" and by MySQL-C-connector. The MySQL-Server is version 5.0.67.

    Read the article

  • External component has thrown an exception. ASP.NET ASPX PAGE POST

    - by Brandon
    I have an aspx page that communicates with a webservice I have. It connects to an SQL Server database on my virtual dedicated server. With just a little usage, I get this error External component has thrown an exception. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Runtime.InteropServices.SEHException: External component has thrown an exception. Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [SEHException (0x80004005): External component has thrown an exception.] Luxand.FSDK.Initialize(String DataFilesPath) +0 WebService.onLoad() +70 WebService..ctor() +91 facematch.btn_submit_Click(Object sender, EventArgs e) +218 System.Web.UI.WebControls.Button.OnClick(EventArgs e) +105 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +107 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1746

    Read the article

  • Apache APC (Windows) Can I optimize these APC settings more?

    - by ar099968
    I would like to optimize APC some more but I am not sure where I could do something. First here is the stats after 1 week of running with the current configuration: General Cache Information APC Version 3.1.9 PHP Version 5.4.4 APC Host XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Server Software Apache Shared Memory 1 Segment(s) with 128.0 MBytes (IPC shared memory, Windows Slim RWLOCK (native) locking) Start Time 2014/06/08 05:00:00 Uptime 6 days, 11 hours and 55 minutes File Upload Support 1 Host Status Diagrams Memory Usage Free: 99.7 MBytes (77.9%) Used: 28.3 MBytes (22.1%) Hits & Misses Hits: 510818 (99.9%) Misses: 608 (0.1%) Detailed Memory Usage and Fragmentation Fragmentation: 0.60% (609.8 KBytes out of 99.7 MBytes in 83 fragments) File Cache Information Cached Files 693 ( 35.4 MBytes) Hits 5143359 Misses 1087 Request Rate (hits, misses) 13.24 cache requests/second Hit Rate 13.24 cache requests/second Miss Rate 0.00 cache requests/second Insert Rate 0.01 cache requests/second Cache full count 0 User Cache Information Cached Variables 0 ( 0.0 Bytes) Hits 0 Misses 0 Request Rate (hits, misses) 0.00 cache requests/second Hit Rate 0.00 cache requests/second Miss Rate 0.00 cache requests/second Insert Rate 0.00 cache requests/second Cache full count 0 Runtime Settings apc.cache_by_default 1 apc.canonicalize 1 apc.coredump_unmap 0 apc.enable_cli 0 apc.enabled 1 apc.file_md5 0 apc.file_update_protection 2 apc.filters -/apc.php$, -/apc_clean.php$, -.tpl.cache.php$, -.tpl.php$, -.string.cache.php$, -.string.php$ apc.gc_ttl 3600 apc.include_once_override 0 apc.lazy_classes 0 apc.lazy_functions 0 apc.max_file_size 2M apc.num_files_hint 7000 apc.preload_path apc.report_autofilter 0 apc.rfc1867 0 apc.rfc1867_freq 0 apc.rfc1867_name APC_UPLOAD_PROGRESS apc.rfc1867_prefix upload_ apc.rfc1867_ttl 3600 apc.serializer default apc.shm_segments 1 apc.shm_size 128M apc.shm_strings_buffer 4M apc.slam_defense 0 apc.stat 1 apc.stat_ctime 0 apc.ttl 7200 apc.use_request_time 1 apc.user_entries_hint 4096 apc.user_ttl 7200 apc.write_lock 1

    Read the article

  • sql server uninstallation issue

    - by angel
    I'm unable to remove SQL Server 2008 sp1 completely from my system. I'm using windows 7 ultimate. Everytime I try uninstalling it i get the following error. How can I remove it? here is the log: Overall summary: Final result: Failed: see details below Exit code (Decimal): -2068643839 Exit facility code: 1203 Exit error code: 1 Exit message: Failed: see details below Start time: 2013-06-24 21:10:38 End time: 2013-06-24 21:21:17 Requested action: Uninstall Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20130624_210908\sql_rs_Cpu64_1.log Exception help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.0.1600.22 Machine Properties: Machine name: ABHI-PC Machine processor count: 4 OS version: Windows Vista OS service pack: Service Pack 1 OS region: United States OS language: English (United States) OS architecture: x64 Process architecture: 64 Bit OS clustered: No Product features discovered: Product Instance Instance ID Feature Language Edition Version Clustered Sql Server 2008 MSSQLSERVER MSRS10.MSSQLSERVER Reporting Services 1033 Enterprise Edition 10.0.1600.22 No Sql Server 2008 Management Tools - Basic 10.0.1600.22 No Package properties: Description: SQL Server Database Services 2008 SQLProductFamilyCode: {628F8F38-600E-493D-9946-F4178F20A8A9} ProductName: SQL2008 Type: RTM Version: 10 SPLevel: 0 Installation edition: ENTERPRISE User Input Settings: ACTION: Uninstall CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20130624_210908\ConfigurationFile.ini FEATURES: RS,SSMS,SNAC_SDK,CE_RUNTIME,CE_TOOLS,SNAC HELP: False INDICATEPROGRESS: False INSTANCEID: INSTANCENAME: MSSQLSERVER MEDIASOURCE: QUIET: False QUIETSIMPLE: False X86: False Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20130624_210908\ConfigurationFile.ini Detailed results: Feature: SQL Client Connectivity Status: Skipped MSI status: Passed Configuration status: Passed Feature: SQL Client Connectivity SDK Status: Skipped MSI status: Passed Configuration status: Passed Feature: Reporting Services Status: Failed: see logs for details MSI status: Passed Configuration status: Failed: see details below Configuration error code: 0xFFD65603 Configuration error description: Input string was not in a correct format. Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20130624_210908\Detail.txt Feature: SQL Compact Edition Tools Status: Passed MSI status: Passed Configuration status: Passed Feature: SQL Compact Edition Runtime Status: Skipped MSI status: Passed Configuration status: Passed Feature: Management Tools - Basic Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Rules with failures: Global rules: There are no scenario-specific rules. Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20130624_210908\SystemConfigurationCheck_Report.htm

    Read the article

  • Java in a browser on Ubuntu

    - by Peter
    So I am running an old version of Ubuntu and all of a sudden, my capabilities to run Java in a browser have stopped and it no longer executes properly. Someone else set this up for me, but I believe it's running icedtea plugin 6 and jre 6. What would be the best ways to troubleshoot this? I suppose I could try downloading icedtea 7 and jre 7 (sun or openjdK) and see if that works? Also, in general, is installing icedtea, installing a java runtime environment, and then symlinking something to the plugins directory of your browser the best way to get Java working on most Linux systems? Unfortunately, there are many guides all over the internet offering totally different solutions, but this is probably the most common I've seen (not sure how well it works). My main use is downloading an executing .jnlp files (browsers should open it automatically). Although, I've seen people using "javasw" to run the file outside of a browser. Is this something I could consider doing? I can't seem to find javasw packaged for my version of Ubuntu.

    Read the article

  • C# SMTP virtual server doesn't send mail [closed]

    - by ragaei
    I have got the following Exception : System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. - System.Runtime.InteropServices.COMException (0x8004020F): The server rejected one or more recipient addresses. The server response was: 550 5.7.1 Unable to relay for [email protected] --- End of inner exception stack trace --- at System.RuntimeType.InvokeDispMethod(String name, BindingFlags invokeAttr, Object target, Object[] args, Boolean[] byrefModifiers, Int32 culture, String[] namedParameters) at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams) at System.Type.InvokeMember(String name, BindingFlags, invokeAttr, Binder binder, Object target, Object[] args, CultureInfo culture) at System.Web.Mail.SmtpMail.LateBoundAccessHelper.CallMethod(Type type, Object obj, String methodName, Object[] args) at System.Web.Mail.SmtpMail.LateBoundAccessHelper.CallMethod(Object obj, String methodName, Object[] args) public static void SendEmail(string _FromEmail, string _ToEmail, string _Subject, string _EmailBody) { // setup email header . SmtpMail.SmtpServer = "127.0.0.1"; MailMessage _MailMessage = new MailMessage(); _MailMessage.From = _FromEmail; _MailMessage.To = _ToEmail; _MailMessage.Subject = _Subject; _MailMessage.Body = _EmailBody; try { SmtpMail.Send(_MailMessage); } catch (Exception ex) { if (ex.InnerException != null) { String str = ex.InnerException.ToString(); } } }

    Read the article

  • Windows OS level file open event trigger

    - by john
    Colleagues, I have need to run a script/program on certain basic OS level events. In particular when a file in Windows is opened. The open may be read-only or to edit, and may be initiated by a number of means, either from windows explorer (open or ), be selected from a viewing or editing application from the native file chooser, or drag-n-drop into an editing or viewing application. Further, i need the trigger to "hold" the event from completing the action until the runtime on the program has completed. The event handler program may return a pass state, or fail state. If fail state has been returned, then the event must disallow the initially requested action. Lastly, I need to add to the file in question a property or attribute that will contain metadata that will be used by the above event trigger handler program to make a determination as to the pass/fail condition that will ultimately determine if the user is permitted to open the file. Please note that this is NOT a windows event log situation, but one at the OS level file open event. thanks very much for your help. regards, j

    Read the article

  • Cisco 7206vxr cpu reducing

    - by naimson
    I have a 7206VXR (NPE-G2) . At the rate of 140 kpps i gain 80% of cpu . So i looking for ways how to reduce it? So i want to turn off netflow(but don't want to this,monitoring is highly important for me), but it will give me only 10-20% ? At this moment with 84kpps i have 58% sh processes cpu sorted give me this. PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process 109 163534600 537236763 304 35.38% 32.83% 16.85% 0 IP Input 67 829396 52280 15864 0.15% 0.01% 0.00% 0 Per-minute Jobs 68 5542736 3053476 1815 0.15% 0.18% 0.16% 0 Per-Second Jobs 51 635852 1116315 569 0.07% 0.03% 0.02% 0 Net Background 329 120396 4607274 26 0.07% 0.00% 0.00% 0 EIGRP-IPv4 Hello 105 50508 95032488 0 0.07% 0.05% 0.05% 0 IPAM Manager 6 4068580 476916 8531 0.00% 0.07% 0.05% 0 Check heaps 7 7768 3634 2137 0.00% 0.00% 0.00% 0 Pool Manager 8 0 1 0 0.00% 0.00% 0.00% 0 DiscardQ Backgro 10 8 708 11 0.00% 0.00% 0.00% 0 WATCH_AFS 5 0 1 0 0.00% 0.00% 0.00% 0 RO Notify Timers 12 0 2 0 0.00% 0.00% 0.00% 0 ATM VC Auto Crea 9 0 2 0 0.00% 0.00% 0.00% 0 Timers 11 0 2 0 0.00% 0.00% 0.00% 0 ATM AutoVC Perio 13 296 610532 0 0.00% 0.00% 0.00% 0 IPC Event Notifi 16 0 1 0 0.00% 0.00% 0.00% 0 IPC Zone Manager 17 3584 2980311 1 0.00% 0.00% 0.00% 0 IPC Periodic Tim 4 0 1 0 0.00% 0.00% 0.00% 0 EDDRI_MAIN 19 0 1 0 0.00% 0.00% 0.00% 0 IPC Process leve 20 0 1 0 0.00% 0.00% 0.00% 0 IPC Seat Manager 21 96 174453 0 0.00% 0.00% 0.00% 0 IPC Check Queue 14 4 50890 0 0.00% 0.00% 0.00% 0 IPC Dynamic Cach 3 0 1 0 0.00% 0.00% 0.00% 0 cpf_process_tpQ 24 756 305371 2 0.00% 0.00% 0.00% 0 IPC Keep Alive M 25 2340 610561 3 0.00% 0.00% 0.00% 0 IPC Loadometer 22 0 1 0 0.00% 0.00% 0.00% 0 IPC Seat RX Cont 15 0 1 0 0.00% 0.00% 0.00% 0 IPC Session Serv 18 1620 2980310 0 0.00% 0.00% 0.00% 0 IPC Deferred Por 29 0 1 0 0.00% 0.00% 0.00% 0 Exception contro sh run(greped): http://pastie.org/5483194 Hardware: c7200p-adventerprisek9-mz.151-4.M1.bin Cisco 7206VXR (NPE-G2) processor (revision A) with 917504K/65536K bytes of memory. Processor board ID 2xxxxxxx MPC7448 CPU at 1666Mhz, Implementation 0, Rev 2.2 6 slot VXR midplane, Version 2.1

    Read the article

  • Can't login to Windows server 2008 (as any user, not even locally, not in safe mode but I have right credentials)

    - by Saix
    Just from nowhere I can't login to my Windows server 2008 machine. All the services like FTP server or webserver (which I'm actually not using, just remote desktop and FTP) are running. Whatever credentials I try (even/especialy administrator), it always says Unknown Username or bad password. I have already tried hard turn off/on and safe mode without luck. Also I already tried type in login name as SERVER NAME\user or Workgroup\user (every case sensitive scenario), still says I have wrong login. Usually we are using remote desktop to access the machine but local access over KVM doesn't work either. Now I'm lock out of any control or any way to do something. There's just logon screen preceding by ctrl+alt+del to login alert. Without me able to login I can't actually try to fix anything. Can't find much more on Internet except the SERVER NAME\user thing. Reinstall would be the last resort but I can't let things this way for much longer anyway. This server is vital. If it would be any help, I think automatic Windows updates are turned off and there were no updates or newly installed software for last couple years and just few soft restarts, non of them recently. It happened during it's runtime while all other services were still up and running, so this couldn't be just some Windows nasty screw up during boot or something. What could have possibly changed? What are my options now?

    Read the article

  • sp_send_dbmail attach files stored as varbinary in database

    - by Mindstorm Interactive
    I have a two part question relating to sending query results as attachments using sp_send_dbmail. Problem 1: Only basic .txt files will open. Any other format like .pdf or .jpg are corrupted. Problem 2: When attempting to send multiple attachments, I receive one file with all file names glued together. I'm running SQL Server 2005 and I have a table storing uploaded documents: CREATE TABLE [dbo].[EmailAttachment]( [EmailAttachmentID] [int] IDENTITY(1,1) NOT NULL, [MassEmailID] [int] NULL, -- foreign key [FileData] [varbinary](max) NOT NULL, [FileName] [varchar](100) NOT NULL, [MimeType] [varchar](100) NOT NULL I also have a MassEmail table with standard email stuff. Here is the SQL Send Mail script. For brevity, I've excluded declare statements. while ( (select count(MassEmailID) from MassEmail where status = 20 )>0) begin select @MassEmailID = Min(MassEmailID) from MassEmail where status = 20 select @Subject = [Subject] from MassEmail where MassEmailID = @MassEmailID select @Body = Body from MassEmail where MassEmailID = @MassEmailID set @query = 'set nocount on; select cast(FileData as varchar(max)) from Mydatabase.dbo.EmailAttachment where MassEmailID = '+ CAST(@MassEmailID as varchar(100)) select @filename = '' select @filename = COALESCE(@filename+ ',', '') +FileName from EmailAttachment where MassEmailID = @MassEmailID exec msdb.dbo.sp_send_dbmail @profile_name = 'MASS_EMAIL', @recipients = '[email protected]', @subject = @Subject, @body =@Body, @body_format ='HTML', @query = @query, @query_attachment_filename = @filename, @attach_query_result_as_file = 1, @query_result_separator = '; ', @query_no_truncate = 1, @query_result_header = 0; update MassEmailset status= 30,SendDate = GetDate() where MassEmailID = @MassEmailID end I am able to successfully read files from the database so I know the binary data is not corrupted. .txt files only read when I cast FilaData to varchar. But clearly original headers are lost. It's also worth noting that attachment file sizes are different than the original files. That is most likely due to improper encoding as well. So I'm hoping there's a way to create file headers using the stored mimetype, or some way to include file headers in the binary data? I'm also not confident in the values of the last few parameters, and I know coalesce is not quite right, because it prepends the first file name with a comma. But good documentation is nearly impossible to find. Please help!

    Read the article

  • Where is the documentation for MSBUILD arguments to run MSDEPLOY?

    - by Simon_Weaver
    There is an excellent PDC talk available here which describes the new MSDEPLOY features in Visual Studio 2010 - as well as how to deploy an application within TFS. The talk explains some of the command line parameters such as : /p:DeployOnBuild /p:DeployTarget=MsDeployPublish /p:CreatePackageOnPublish=True /p:MSDeployPublishMethod=InProc /p:MSDeployServiceURL=localhost /p:DeployIISAppApth="Default Web Site" But where is the documentation for this - explaining how they work and what i should use? Most of these turn up very few or zero results when searching. Isn't there some actual documentation for these parameters somewhere? I'd rather use these to deploy than try to add a command line exec command to run the package. I've managed to create a web deployment package, which TFS is copying to the output. But I'm ending up with all kinds of errors trying to actually deploy the package. Currently in my build configuration in TFS I have the following arguments for MSBuild Arguments /p:DeployOnBuild=True /p:DeployTarget=MsDeployPublish /p:Configuration=Release /p:CreatePackageOnPublish=True /p:DeployIisAppPath=staging.example.com /p:MsDeployServiceUrl=localhost This however gives me this error : Is there any actual real documentation for these arguments? It would probably take me about 5 minutes to get it running the package by the command line, but i want to get them deploying like this because it will simplify multiple configurations later.

    Read the article

  • Running MSBuild fails to read SDKToolsPath

    - by Scott Mayfield
    Howdy, I'm having a bit of an issue runnning a NAnt script that used to properly build my .Net 2.0 based website, when compiling with VS2008 and it's associated tools. I've recently upgraded all the project/solution files to VS2010, and now my build fails with the following error: [exec] C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets(2249,9): error MSB3086: Task could not find "sgen.exe" using the S dkToolsPath "" or the registry key "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SDKs\Windows\v7.0A". Make sure the SdkToolsPath is set and the tool exists in the correct processor specific location under the SdkToolsPath and that the Microsoft Windows SDK is installed Now, I DO have prior versions (.Net 3.5) of the Windows SDK installed on the build server, and the full .Net 4.0 framework is installed, but I've not run across a .Net 4.0 specific version of the Windows SDK. After a bit of experimentation and research, I finally just setup a new environmental variable "SDKToolsPath" and pointed it to the copy of sgen.exe in my windows 6.0 sdk folder. This generated the same error, but it got me to notice that even though the SDKToolsPath environmental variable IS set (confirmed that I can "echo" it at the command line and it has the expected value), the error message seems to indicated that it's not being read (note the empty quotes). Most of the information I've found is .Net 3.5 (or earlier) specific. Not much 4.0 related out there yet. Searching for error code MSB3086 generated nothing useful either. Any idea what this might be? Scott

    Read the article

  • The data reader returned by the store data provider does not have enough columns

    - by molgan
    Hello I get the following error when I try to execute a stored procedure: "The data reader returned by the store data provider does not have enough columns" When I in the sql-manager execute it like this: DECLARE @return_value int, @EndDate datetime EXEC @return_value = [dbo].[GetSomeDate] @SomeID = 91, @EndDate = @EndDate OUTPUT SELECT @EndDate as N'@EndDate' SELECT 'Return Value' = @return_value GO It returns the value properly.... @SomeDate = '2010-03-24 09:00' And in my app I have: if (_entities.Connection.State == System.Data.ConnectionState.Closed) _entities.Connection.Open(); using (EntityCommand c = new EntityCommand("MyAppEntities.GetSomeDate", (EntityConnection)this._entities.Connection)) { c.CommandType = System.Data.CommandType.StoredProcedure; EntityParameter paramSomeID = new EntityParameter("SomeID", System.Data.DbType.Int32); paramSomeID.Direction = System.Data.ParameterDirection.Input; paramSomeID.Value = someID; c.Parameters.Add(paramSomeID); EntityParameter paramSomeDate = new EntityParameter("SomeDate", System.Data.DbType.DateTime); SomeDate.Direction = System.Data.ParameterDirection.Output; c.Parameters.Add(paramSomeDate); int retval = c.ExecuteNonQuery(); return (DateTime?)c.Parameters["SomeDate"].Value; Why does it complain about columns? I googled on error and someone said something about removing RETURN in sp, but I dont have any RETURN there. last like is like SELECT @SomeDate = D.SomeDate FROM .... /M

    Read the article

  • not able to use g++ from Fedora

    - by eSKay
    $ yum list | grep gcc arm-gp2x-linux-gcc.i686 4.1.2-11.fc12 @fedora arm-gp2x-linux-gcc-c++.i686 4.1.2-11.fc12 @fedora gcc.i686 4.4.3-4.fc12 @updates libgcc.i686 4.4.3-4.fc12 @updates avr-gcc.i686 4.4.2-2.fc12 updates avr-gcc-c++.i686 4.4.2-2.fc12 updates compat-gcc-34.i686 3.4.6-18 fedora compat-gcc-34-c++.i686 3.4.6-18 fedora compat-gcc-34-g77.i686 3.4.6-18 fedora compat-libgcc-296.i686 2.96-143 fedora gcc-c++.i686 4.4.3-4.fc12 updates gcc-gfortran.i686 4.4.3-4.fc12 updates gcc-gnat.i686 4.4.3-4.fc12 updates gcc-java.i686 4.4.3-4.fc12 updates gcc-objc.i686 4.4.3-4.fc12 updates gcc-objc++.i686 4.4.3-4.fc12 updates mingw32-gcc.i686 4.4.1-3.fc12 fedora mingw32-gcc-c++.i686 4.4.1-3.fc12 fedora mingw32-gcc-gfortran.i686 4.4.1-3.fc12 fedora mingw32-gcc-objc.i686 4.4.1-3.fc12 fedora mingw32-gcc-objc++.i686 4.4.1-3.fc12 fedora msp430-gcc.i686 3.2.3-3.20090210cvs.fc12 $ gcc works fine on .c files but fails on .cpp files saying: $ gcc: error trying to exec 'cc1plus': execvp: No such file or directory g++ fails saying: $ g++: Command not found. What should I do to be able to compile C++ files?

    Read the article

  • entity framework 4 POCO's stored procedure error - "The FunctionImport could not be found in the container"

    - by user331884
    Entity Framework with POCO Entities generated by T4 template. Added Function Import named it "procFindNumber" specified complex collection named it "NumberResult". Here's what got generated in Context.cs file: public ObjectResult<NumberResult> procFindNumber(string lookupvalue) { ObjectParameter lookupvalueParameter; if (lookupvalue != null) { lookupvalueParameter = new ObjectParameter("lookupvalue", lookupvalue); } else { lookupvalueParameter = new ObjectParameter("lookupvalue", typeof(string)); } return base.ExecuteFunction<NumberResult>("procFindNumber", lookupvalueParameter); } Here's the stored procedure: ALTER PROCEDURE [dbo].[procFindNumber] @lookupvalue varchar(255) AS BEGIN SET NOCOUNT ON; DECLARE @sql nvarchar(MAX); IF @lookupvalue IS NOT NULL AND @lookupvalue <> '' BEGIN SELECT @sql = 'SELECT dbo.HBM_CLIENT.CLIENT_CODE, dbo.HBM_MATTER.MATTER_NAME, dbo.HBM_MATTER.CLIENT_MAT_NAME FROM dbo.HBM_MATTER INNER JOIN dbo.HBM_CLIENT ON dbo.HBM_MATTER.CLIENT_CODE = dbo.HBM_CLIENT.CLIENT_CODE LEFT OUTER JOIN dbo.HBL_CLNT_CAT ON dbo.HBM_CLIENT.CLNT_CAT_CODE = dbo.HBL_CLNT_CAT.CLNT_CAT_CODE LEFT OUTER JOIN dbo.HBL_CLNT_TYPE ON dbo.HBM_CLIENT.CLNT_TYPE_CODE = dbo.HBL_CLNT_TYPE.CLNT_TYPE_CODE WHERE (LTRIM(RTRIM(dbo.HBM_MATTER.CLIENT_CODE)) <> '''')' SELECT @sql = @sql + ' AND (dbo.HBM_MATTER.MATTER_NAME like ''%' + @lookupvalue + '%'')' SELECT @sql = @sql + ' OR (dbo.HBM_MATTER.CLIENT_MAT_NAME like ''%' + @lookupvalue + '%'')' SELECT @sql = @sql + ' ORDER BY dbo.HBM_MATTER.MATTER_NAME' -- Execute the SQL query EXEC sp_executesql @sql END END In my WCF service I try to execute the stored procedure: [WebGet(UriTemplate = "number/{value}/?format={format}")] public IEnumerable<NumberResult> GetNumber(string value, string format) { if (string.Equals("json", format, StringComparison.OrdinalIgnoreCase)) { WebOperationContext.Current.OutgoingResponse.Format = WebMessageFormat.Json; } using (var ctx = new MyEntities()) { ctx.ContextOptions.ProxyCreationEnabled = false; var results = ctx.procFindNumber(value); return results.ToList(); } } Error message says "The FunctionImport ... could not be found in the container ..." What am I doing wrong?

    Read the article

  • Java: immutable Stack?

    - by HH
    I chose to use Stacks and Tables before knowing Collections has immutable empty things only for Set, Map and List. Because the size of table does not change after its init: Integer[] table = new Intger[0] I can use the zero-witdh table as an empty table. But I cannot use final or empty Stack to get immutable Stack: No immutability to Stack with Final import java.io.*; import java.util.*; public class TestStack{ public static void main(String[] args) { final Stack<Integer> test = new Stack<Integer>(); Stack<Integer> test2 = new Stack<Integer>(); test.push(37707); test2.push(80437707); //WHY is there not an error to remove an elment // from FINAL stack? System.out.println(test.pop()); System.out.println(test2.pop()); } } Java Api 5 for list interface shows that Stack is an implementing class for list and arraylist, here. The java.coccurrent pkg does not have any immutable Stack data structure. From Stack to some immutable data structure How to get immutable Stack data structure? Can I box it with list? Should I switch my current implementatios from stacks to Lists to get immutable? Which immutable data structure is Very fast with about similar exec time as Stack?

    Read the article

  • IQueryable<> from stored procedure (entity framework)

    - by mmcteam
    I want to get IQueryable<> result when executing stored procedure. Here is peace of code that works fine: IQueryable<SomeEntitiy> someEntities; var globbalyFilteredSomeEntities = from se in m_Entities.SomeEntitiy where se.GlobalFilter == 1234 select se; I can use this to apply global filter, and later use result in such way result = globbalyFilteredSomeEntities .OrderByDescending(se => se.CreationDate) .Skip(500) .Take(10); What I want to do - use some stored procedures in global filter. I tried: Add stored procedure to m_Entities, but it returns IEnumerable<> and executes sp immediately: var globbalyFilteredSomeEntities = from se in m_Entities.SomeEntitiyStoredProcedure(1234); Materialize query using EFExtensions library, but it is IEnumerable<>. If I use AsQueryable() and OrderBy(), Skip(), Take() and after that ToList() to execute that query - I get exception that DataReader is open and I need to close it first(can't paste error - it is in russian). var globbalyFilteredSomeEntities = m_Entities.CreateStoreCommand("exec SomeEntitiyStoredProcedure(1234)") .Materialize<SomeEntitiy>(); //.AsQueryable() //.OrderByDescending(se => se.CreationDate) //.Skip(500) //.Take(10) //.ToList(); Also just skipping .AsQueryable() is not helpful - same exception. When I put ToList() query executes, but it is too expensive to execute query without Skip(), Take().

    Read the article

  • Named query not known error trying to call a stored proc using Fluent NHibernate

    - by Hamman359
    I'm working on setting up NHibernate for a project and I have a few queries that, due to their complexity, we will be leaving as stored procedures. I'd like to be able to use NHibernate to call the sprocs, but have run into an error I can't figure out. Since I'm using Fluent NHibernate I'm using mixed mode mapping as recommended here. However, when I run the app I get a "Named query not known: AccountsGetSingle" exception and I can't figure out why. I think I might have a problem with my HBM mapping since I'm not very familiar with using them but I'm not sure. My NHibernate configuration code is: private ISessionFactory CreateSessionFactory() { return Fluently.Configure() .Database(MsSqlConfiguration.MsSql2005 .ConnectionString((conn => conn.FromConnectionStringWithKey("CIDB"))) .ShowSql()) .Mappings(m => { m.HbmMappings.AddFromAssemblyOf<Account>(); m.FluentMappings.AddFromAssemblyOf<Account>(); }) .BuildSessionFactory(); } My hbm.xml file is: <?xml version="1.0" encoding="utf-8" ?> <hibernate-mapping xmlns="urn:nhibernate-mapping-2.2"> <sql-query name="AccountsGetSingle"> <return alias="Account" class="Core, Account"></return> exec AccountsGetSingle </sql-query> </hibernate-mapping> And the code where I am calling the sproc looks like this: public Account Get() { return _conversation.Session .GetNamedQuery("AccountsGetSingle") .UniqueResult<Account>(); } Any thoughts or ideas would be appreciated. Thanks.

    Read the article

  • Nhibernate exception - No persister for

    - by Muhammad Akhtar
    I am getting exception when calling Stored Procedure using Nhibernate and here is the exception No persister for: ReleaseDAL.ProgressBars, ReleaseDAL, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null here is class file public class ProgressBars { public ProgressBars() { } private Int32 _Tot; private Int32 _subtot; public virtual Int32 Tot {get { return _Tot; } set { _Tot = value; } } public virtual Int32 subtot { get { return _subtot; } set { _subtot = value; }} } here is my mapping file <hibernate-mapping xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="urn:nhibernate-mapping-2.2" assembly="ReleaseDAL" namespace="ReleaseDAL" > <sql-query name="ps_getProgressBarData1" > <return alias="ProgressBars" class="ProgressBars"> <return-property name="Tot" column="Tot"/> <return-property name="subtot" column="subtot"/> </return> exec ps_getProgressBarData1 </sql-query> </hibernate-mapping> Calling Code public List<ProgressBars> getProgressBarData1(Guid ReleaseId) { ISession session = NHibernateHelper.GetCurrentSession(); List< ProgressBars> progressBar = (List<ProgressBars>)session.GetNamedQuery("ps_getProgressBarData1").List<ProgressBars>(); NHibernateHelper.CloseSession(); return progressBar; } I am introuble due to this exception, I did lot Google but no success, Please give idea to solve this problem. Thanks.........

    Read the article

  • Installable ISAM not found

    - by lucky
    I have a requirement in which i upload excel sheets to sql server database. The business logic is executed and display as reports in php. It is working fine till yesterday. Today i tried to upload excel files. It is throwing an error message stating:- Translated version of it by me:- The OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "(null)" has not found "installable ISAM." . Return This is the original message in german:-- [Microsoft][ODBC SQL Server Driver][SQL Server] OLE DB-Anbieter "Microsoft.Jet.OLEDB.4.0" für den Verbindungsserver "(null)" hat die Meldung "Installierbares ISAM nicht gefunden." zurückgeben. Query that i used in the stored procedure:- EXEC('SELECT * INTO temp FROM OPENROWSET(''Microsoft.Jet.OLEDB.4.0'', ''Excel 8.0;Database=' + @ba_bm_status + ''',' + '''SELECT * FROM [qry_BA_Controlling (Report)$]'')'); @ba_bm_status - i/p parameter of srored procedure qry_BA_Controlling (Report) - worksheet name webserver used:- IIS, connection is through odbc. I have no information about this error. Can you please help me in solving the same.

    Read the article

  • RubyQT QGraphicsview scale images to fit window

    - by shadowskill
    I'm trying to make an image scale inside of a QGraphicsView and having zero success. I did find this C++ question with what seemed to be the same problem:http://stackoverflow.com/questions/2489754/qgraphicsview-scrolling-and-image-scaling-cropping I borrowed the approach of overriding the drawback/foreground. However when I run the script I'm greeted with a method_missing error: method_missing: undefined method drawPixmap for #<Qt::Painter:0x7ff11eb9b088> QPaintDevice: Cannot destroy paint device that is being painted What should I be doing to get the QGraphicsView to behave the way I want? class Imageview < Qt::GraphicsView attr_reader :pixmap def initialize(parent=nil) # @parent=parent super() @pixmap=pixmap Qt::MetaObject.connectSlotsByName(self) end def loadimage(pixmap) @pixmap=pixmap end def drawForeground(painter, rect) #size=event.size() #item= self.items()[0] #Qt::GraphicsPixmapItem.new #pixmap=@pixmap #painter=Qt::Painter.new [email protected](Qt::Size.new(rect.width,rect.height),Qt::KeepAspectRatio, Qt::SmoothTransformation) # painter.begin(self) painter.drawPixmap(rect,sized,Qt::Rect.new(0.0, 0.0, sized.width,sized.height)) #painter.end() # item.setPixmap(sized) #painter.end self.centerOn(1.0,1.0) #item.scale() # item.setTransformationMode(Qt::FastTransformation) # self.fitInView(item) end def updateSceneRect painter=Qt::Painter.new() drawForeground(painter,self.sceneRect) end end app=Qt::Application.new(ARGV) #grview=Imageview.new pic=Qt::Pixmap.new('pic') grview=Imageview.new() grview.loadimage(pic) scene=Qt::GraphicsScene.new #scene.addPixmap(pic) grview.setScene(scene) #grview.fitInView(scene) grview.renderHint=Qt::Painter::Antialiasing | Qt::Painter::SmoothPixmapTransform grview.backgroundBrush = Qt::Brush.new(Qt::Color.new(230, 200, 167)) grview.show app.exec

    Read the article

  • Some JPEG images are not working in IE

    - by jwandborg
    Hello, I have a press archive. The press archive displays automattically created thumbnails as links to a PDF document. This is what i get in IE 6, 7 & 8: While it works fine in Chrome: The thumbnails are automatically created by imagemagick: $cmd = 'convert ' . $_FILES['file']['tmp_name'] # This is a PDF file . '[0]' # This indicates that it the first page that should be converted . ' -resize "120x120" ' # This is the size of the thumbnail . $thumb_path; # This is the destination $resize_output = exec($cmd); A command can look like this convert /tmp/AcXDYe[0] -resize "120x120>" /var/www[...] However I looked a little closer on the images and it seems that they are a little different and this is a theme among all the failing images Image that does'nt work in IE: http://regex.info/exif.cgi?url=http://bit.ly/aFTL3T Image that works fine: http://regex.info/exif.cgi?url=http://bit.ly/b71B7R So, can i change my imagemagick command so that creates IE-compatible JPEGS?

    Read the article

  • Entity Framework, Foreign Keys and EntityKeys

    - by Greg
    I've got a problem with the Entity Framework and the ForeignKeys. I've got a table "BC_Message_Assets" which has 3 FK's (MessageId, AssetId and StatusId). I create my "MessageAsset" like this MessageAsset messageAsset = new MessageAsset(); messageAsset.MessageStatusReference.EntityKey = new EntityKey("MyEntities.MessageStatusSet", "Id", 1); messageAsset.AssetReference.EntityKey = new EntityKey("MyEntities.AssetSet", "Id", 1); messageAsset.MessageReference.EntityKey = new EntityKey("MyEntities.MessageSet", "Id", messageId); context.AddToMessageAssetSet(messageAsset); context.SaveChanges(); But I got the following exception : The INSERT statement conflicted with the FOREIGN KEY constraint \"FK_BC_Message_Assets_BC_Assets\". The conflict occurred in database \"Test\", table \"dbo.BC_Assets\", column 'Id'.\r\nThe statement has been terminated. When I look at the query, I notice that the parameter value for AssetId is "0" despite that I provided "1" to the EntityKey. Here's the generated query : exec sp_executesql N'insert [dbo].[BC_Message_Assets]([MessageId], [AssetId], [CompletionTime], [StatusId]) values (@0, @1, null, @2) ',N'@0 int,@1 int,@2 int',@0=47,@1=0,@2=1 I can't explain what happens. I hardcoded "1" in the EntityKey and I received "0" in the query ?

    Read the article

  • infinite loop shutting down ensime

    - by Jeff Bowman
    When I run M-X ensime-disconnect I get the following forever: string matching regex `\"((?:[^\"\\]|\\.)*)\"' expected but `^@' found and I see this exception when I use C-c C-c Uncaught exception in com.ensime.server.SocketHandler@769aba32 java.net.SocketException: Broken pipe at java.net.SocketOutputStream.socketWrite0(Native Method) at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:109) at java.net.SocketOutputStream.write(SocketOutputStream.java:153) at sun.nio.cs.StreamEncoder.writeBytes(StreamEncoder.java:220) at sun.nio.cs.StreamEncoder.implFlushBuffer(StreamEncoder.java:290) at sun.nio.cs.StreamEncoder.implFlush(StreamEncoder.java:294) at sun.nio.cs.StreamEncoder.flush(StreamEncoder.java:140) at java.io.OutputStreamWriter.flush(OutputStreamWriter.java:229) at java.io.BufferedWriter.flush(BufferedWriter.java:253) at com.ensime.server.SocketHandler.write(server.scala:118) at com.ensime.server.SocketHandler$$anonfun$act$1$$anonfun$apply$mcV$sp$1.apply(server.scala:132) at com.ensime.server.SocketHandler$$anonfun$act$1$$anonfun$apply$mcV$sp$1.apply(server.scala:127) at scala.actors.Actor$class.receive(Actor.scala:456) at com.ensime.server.SocketHandler.receive(server.scala:67) at com.ensime.server.SocketHandler$$anonfun$act$1.apply$mcV$sp(server.scala:127) at com.ensime.server.SocketHandler$$anonfun$act$1.apply(server.scala:127) at com.ensime.server.SocketHandler$$anonfun$act$1.apply(server.scala:127) at scala.actors.Reactor$class.seq(Reactor.scala:262) at com.ensime.server.SocketHandler.seq(server.scala:67) at scala.actors.Reactor$$anon$3.andThen(Reactor.scala:240) at scala.actors.Combinators$class.loop(Combinators.scala:26) at com.ensime.server.SocketHandler.loop(server.scala:67) at scala.actors.Combinators$$anonfun$loop$1.apply(Combinators.scala:26) at scala.actors.Combinators$$anonfun$loop$1.apply(Combinators.scala:26) at scala.actors.Reactor$$anonfun$seq$1$$anonfun$apply$1.apply(Reactor.scala:259) at scala.actors.ReactorTask.run(ReactorTask.scala:36) at scala.actors.ReactorTask.compute(ReactorTask.scala:74) at scala.concurrent.forkjoin.RecursiveAction.exec(RecursiveAction.java:147) at scala.concurrent.forkjoin.ForkJoinTask.quietlyExec(ForkJoinTask.java:422) at scala.concurrent.forkjoin.ForkJoinWorkerThread.mainLoop(ForkJoinWorkerThread.java:340) at scala.concurrent.forkjoin.ForkJoinWorkerThread.run(ForkJoinWorkerThread.java:325) Is there something else I'm missing in my config or I should check on? Thanks, Jeff

    Read the article

  • cpptask ordering of static libraries in gcc command line

    - by AC
    How do I force cpptask to move the static libraries to the end on arg list issued to the compiler? Here is the clause I am using <cpptasks:cc description="appname" subsystem="console" objdir="obj" outfile="dist/app_test"> <compiler refid="testsslcc" /> <linkerarg value="-L${libdir}" /> <linkerarg value="-L/usr/local/devl/lib" /> <linkerarg value="-Wl,-rpath,../lib" /> <libset libs="unittest ${libs} dsg readline ncurses gcov" /> <fileset dir="test/obj" includes="main.o" /> <fileset dir="." includes="${TCFILES}" /> <fileset dir="../lib" includes="libboost_thread.a libboost_date_time.a" /> </cpptasks:cc> when this executes, libboost_thread.a libboost_date_time.a are first files in the argument list passed the compiler, gcc -ggdb -Wl,-export-dynamic -Wshadow -Wno-format-y2k ../../lib/libboost_date_time.a ../../lib/libboost_thread.a x.cpp ... which causes compiler error. By manually moving them to the end of the argument list, the application compiles without error. gcc -ggdb -Wl,-export-dynamic -Wshadow -Wno-format-y2k x.cpp ... ../../lib/libboost_date_time.a ../../lib/libboost_thread.a And yes I have tried changing the order in the xml, and that of course didn't work. For now I am using an exec task to call gcc with the files in the correct order but this of course is a hack.

    Read the article

< Previous Page | 213 214 215 216 217 218 219 220 221 222 223 224  | Next Page >