Search Results

Search found 9557 results on 383 pages for 'x86 64'.

Page 217/383 | < Previous Page | 213 214 215 216 217 218 219 220 221 222 223 224  | Next Page >

  • Unable to change IP address for eth0 without restart in Ubuntu

    - by Rodnower
    I have Ubuntu 12.04.1 installed. I tried to change the IP address of the interface eth0 in /etc/network/interfaces from 192.168.1.3 to 192.168.1.4 auto lo iface lo inet loopback pre-up iptables-restore < /etc/iptables.up.rules auto eth0 iface eth0 inet static address 192.168.1.4 gateway 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 sudo service networking status When I issue: sudo service networking restart I get this response: stop: Unknown instance: networking stop/waiting And IP remains 192.168.1.3: eth0 Link encap:Ethernet HWaddr 00:1e:33:71:cd:a4 inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:33ff:fe71:cda4/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3861 errors:0 dropped:0 overruns:0 frame:0 TX packets:3291 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3423285 (3.4 MB) TX bytes:521854 (521.8 KB) Interrupt:45 Base address:0x4000 Only after restart does the IP change. Any ideas?

    Read the article

  • VPN IPsec site 2 site and static routing

    - by Giacomo
    Hello everybody experts! My question is pretty simple, but I can't figure it out because I'm pretty noob with these network stuffs. I have a vpn IPsec site2site between 2 lan with different ip classes, LAN A is class C and LAN B is class A. The vpn presents the LAN A to LAN B with the 10.178.51.64/27 segment. The problem is that when I start the vpn connection I cant Ping any 10.174.0.0/24 address(LAN B remote segment) from my LAN A; I think I need some kind of static route. Could u help me out pls? Thx Regards

    Read the article

  • How to understand cpu family/model/stepping fields in /proc/cpuinfo [closed]

    - by Victor Sorokin
    I have following in cpuinfo: processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 107 model name : AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ stepping : 2 According to Wikipedia page there are two kinds of 5600+ -- one of 90nm technology, another of 65nm. How can I understand which one I have? There seem to be no direct correspondence between contents of cpuinfo and info on Wikipedia page. AMD site seems to use some other naming scheme for processors too. How can I map values of family, model and stepping from cpuinfo to the data available on Wikipedia/AMD?

    Read the article

  • Automatically detecting temperature sensors on startup (Ubuntu 10.10)

    - by dpitch40
    I am very close to achieving my goal of setting up a CPU temperature graph that is displayed in the top panel of my desktop. I have the applet and have gotten it to graph temperatures, which appear to be being sensed correctly. However, my machine doesn't find its temperature sensors by default; I have to run sudo modprobe coretemp for the sensors command to work, then log off and back in before the graph applet starts displaying my temperatures. I am wondering if I can somehow tell the kernel to load the coretemp module on startup so I don't have to keep doing these extra steps. I have tried putting this command in my startup applications, but I think its need for root permission is keeping this from working. Is there a way to set up startup applications with root permission, or some other way to ensure that this module is loaded at startup? If anyone is curious, I'm running 64-bit Ubuntu 10.10 on a Lenovo G770 laptop with a Core i5 processor and the 2.6.35 kernel.

    Read the article

  • How to find what is causing Windows 7 Desktop pause

    - by user1009073
    Windows 7 64 bit. Been in use approx 2 years since last rebuild. Recently, system is misbehaving. Specifically, on bootup, I get the login screen. I login, I get my desktop wallpapers (2 monitors). I get one widget (Rainlender2). It now pauses for approx 12 minutes. After that time, it continues fine, without errors/popups. It acts like the delay never happens. How do I identify the cause of the delay?

    Read the article

  • Can't select text with mouse in Word / Office 2007

    - by asc99c
    I'm having a very weird problem here for the last few months. In Word, and in fact all programs from the Office 2007 suite, I can't drag the mouse pointer to select text. I can click at a point in the text and the cursor moves correctly to that point. If I double click, the word under the cursor is selected, and triple clicking selects the whole line. However if I hold the mouse button down and drag the mouse, no text is selected. Occasionally the problem disappears and everything works fine, but it then reappears a few minutes later. Text selection with the mouse works everywhere else (Firefox, PuTTY, OpenOffice), just not in Office. The only addins are Google Desktop Office Addin, and Person Name (). For info it is Office 2007 SP3, running on Windows 7 64-bit.

    Read the article

  • Copy-paste stops working on Windows 7

    - by earlyadopter
    Copy-paste functionality stops working after about an hour after each reboot on a Windows 7 64-bit system. Running Google Chrome (with gmail and few other tabs open like Calendar, Reader), MS Outlook (which I don't think has anything to do with the problem — I saw it when outlook was off as well), iTunes (9.1.1.12 if it matters). Would appreciate hints where and what for to look in a registry, and ideas for possible fix. That is not an Internet Explorer problem (I don't even run it) — it happens in all applications. Neither Ctrl-C/Ctrl-V nor context menu right-click Copy-Paste (actually, nothing happens on Copy, so there is nothing in a clipboard to Paste) are working. Drag-and-Drop (where supported) continues working though.

    Read the article

  • Windows 7 - XP Mode - Apache

    - by Howard
    I've setup Virtual PC and XP Mode on my Windows 7 Pro. Using Apache 2.0.52 I have no problems having my website up and running on the Windows 7 machine. But Under VPC/XP Mode the best I can do is Localhost mode. What do I need to do to enable http connections? I need the XP Mode as besides the website I also run a Web BBS and a Dos based (via telnet) BBS. Some of the apps in the Dos BBS just won't work under 64 bit, no matter what setting (capability) are used. Thanks in advance...

    Read the article

  • can server 2008's task scheduler run a php file?

    - by rg89
    Hello. I have a server 2008 64 bit machine with php5 via fastcgi installed. I want to run a .php script every day at 3 AM. I set up a task and "Last Run Result" says "%1 is not a valid Win32 application" The event properties describe more failure: "Task Scheduler failed to launch action "D:\InetPub\tools\something\build.php" in instance "{88cc01f4-9554-4b8f-9836-34d806337d7f}" of task "\Something". Additional Data: Error Value: 2147942593." Task Category: Action failed to start Is it possible to run scripts using the task scheduler? If not, how should I go about automating the execution of a php script? Thanks

    Read the article

  • ATI Radeon 4350 lower resolutions do not fill screen in Windows 7

    - by rlandster
    I have a new Windows 7 64-bit machine with an ATI HD4350 card. The card is connected via VGA (DSUB) to a SyncMaster 205 BW LCD monitor. If I set the resolution to 1680x1050 the LCD screen is completely filled and everything looks fine. But, if I try to set the resolution to 1280x768 (my preferred resolution) only about 2/3 of the monitor screen is used. There are large black bars above and below the image (but not on the sides). I have successfully used this monitor at the 1280x768 resolution for many years without this problem (albeit in Windows XP and a different video card). Can anyone suggest how I can get adjust things so that the entire screen is used at the 1280x768 resolution?

    Read the article

  • Another "Trouble copying music files from HD to 16GB thumb drive"

    - by Ron
    I have a brand new HP Quad Core - 6GB Ram - running 64-bit Windows 7. Running Norton Internet 2010. I try copying music files from HD to 16 GB thumbdrive and get blue screen after a few files have transfered over to thumbdrive. Computer blinks once and boom - blue screen and then reboots. This is really aggravating. I stopped anti-virus, pulled other USB attached devices - still does same thing. Any solutions out there?

    Read the article

  • Can't run monitor at native 1080p resolution on Windows 7

    - by Rex
    I have a 24" ViewSonic VX2453 monitor that supports 1920x1080p, connected using HDMI. However at that resolution, the desktop goes off the screen. Using the Nvidia control panel, I have to set it to a custom resolution of 1804x1014 to display correctly. The monitor has its drivers properly installed (the correct model name shows up in control panel after installing the drivers), and I'm running 64 bit Win7 Ultimate. I have a GeForce 560 Ti card, if that helps. Why does this happen?

    Read the article

  • Acrobat Reader, and indeed all Adobe products are freezing and crashing on print

    - by 5tratus
    Everything was working fine, right up till I had to do some driver work to get my scanner to work - now I can't seem to print from any Adobe product. I click print and the program freezes, it stops responding, and in the case of Acrobat Reader, it crashes. In the case of In-design CS4, I have to stop the process in task manager, in the case of Fireworks CS3 - I think it just crashes. Printing a PDF hangs and crashes inside of Firefox and IE browsers too. My printer works and I can print from MS Word, Excel and directly by right clicking on a non-Adobe file and choosing print. But when I try it in an Adobe product. I'm running Windows 7 64-bit, my version of Adobe Reader is: 10.1.11, Windows is updated, and I don't have any unusual extensions.

    Read the article

  • IPv4 NameVirtualHost, IPv6 VirtualHost

    - by MadHatter
    Like many of us, I have an apache server (2.2.15, plus patches) with a lot of virtual hosts on it. More than I have IPv4 addresses, to be sure, which is why I use NameVirtualHost to run lots of them on the same IPv4 address. I'm busily trying to get everything I do IPv6-enabled. This server now has a routed /64, which gives me an awful lot of v6 addresses to throw around. What I'm trying to find is a simple way to tell each v4-NameVirtualHost that it should also function as a VirtualHost on a unique ipv6 address. I really, really don't want to have to define each virtual host twice. Does anyone know of an elegant way to do this? Or to do something comparable, in case I've embedded any dangerously-ignorant assumptions in my question?

    Read the article

  • Cherokee high virtual memory usage even after disabling I/O Cache

    - by nidheeshdas
    I've Ubuntu 10.04LTS 64-bit running on a openvz container and Cherokee 1.0.8 compiled from source. The virtual memory usage of cherokee-worker is around 430 MB even after disabling I/O cache from Advanced - I/O Cache - NOT enabled. Is this issue particular to openvz? Because many people reported to have successfully reduced virt memory usage by disabling io cache. htop output: http://imgur.com/z5JEL.jpg (newbies not allowed to post image.) thanks in advance. nidheeshdas

    Read the article

  • Linux/Apache performance very slow even on local network

    - by klausch
    I have an Ubuntu server machine running Apache and MYSQL. System and version info is as follows: Linux kernel 3.0.0.-12 Apache/2.2.20 MySQL Ver 14.14.Distrib 5.1.58 I am running a few websites on this server, some HTML only, some PHP/MySQL. THe [problem is that response time is very slow, both on static as well as the dynamic sites. Sometimes it takes more than 10 seconds before a response is given, this makes the sites very slow and almost unusable. The problem occurs even when requesting from the local network. I have added the involved subdomains to my /etc/hosts file, and abolve all the problem is not solved by using IP numbers instead of URL's. So there is no DNS lookup issue. I have modified the log format by showing the response times and sometimes a files takes 12 seconds to be served, see the jquery~.js file in the example screenshot. I have no explanation for this extremely long response time, but is is not even the only issue here, some other files takes a long time to be served too, but do not show a long response time in the log file. So probably different tissues are involved here. I cannot find a solution until now, any suggestions??? THanx in advance, Klaas link to screenshot picture from access logfile Some extra configuration info: apache2.conf (comment is removed) LockFile ${APACHE_LOCK_DIR}/accept.lock PidFile ${APACHE_PID_FILE} Timeout 300 KeepAlive On MaxKeepAliveRequests 100 KeepAliveTimeout 5 <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 150 MaxRequestsPerChild 0 </IfModule> <IfModule mpm_worker_module> StartServers 2 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxClients 150 MaxRequestsPerChild 0 </IfModule> <IfModule mpm_event_module> StartServers 2 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxClients 150 MaxRequestsPerChild 0 </IfModule> User ${APACHE_RUN_USER} Group ${APACHE_RUN_GROUP} AccessFileName .htaccess <Files ~ "^\.ht"> Order allow,deny Deny from all Satisfy all </Files> DefaultType text/plain HostnameLookups Off ErrorLog ${APACHE_LOG_DIR}/error.log LogLevel warn Include mods-enabled/*.load Include mods-enabled/*.conf Include httpd.conf Include ports.conf LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\" %T/%D" combined LogFormat "%h %l %u %t \"%r\" %>s %O" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent Include conf.d/ Include sites-enabled/ And the virtual hostfile for one of the slow sites, in fact it is pretty straightforward... <VirtualHost *:80> ServerAdmin [email protected] ServerSignature EMail ServerName toenjoy.drsklaus.nl DocumentRoot /var/www/toenjoy.drsklaus.nl <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/toenjoy.drsklaus.nl/> Options Indexes FollowSymLinks MultiViews AllowOverride AuthConfig AuthType Basic AuthName "To Enjoy" AuthUserFile /etc/.htpasswd Require user petraaa Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> And the output of free -m: klaas@ubuntu-server:/etc/apache2$ free -m total used free shared buffers cached Mem: 1997 1401 595 0 144 1017 -/+ buffers/cache: 238 1758 Swap: 2035 0 2035 and I have no indication that swapping occurs on the moments the site is slow. I have runned top and it does not appear to be a CPU issue. I have the impression that the spawning of a apache thread could maybe be the bottleneck but it is just a suggestion. Maybe this gives some extra information! EDIT: The problem seemed to be gone for some time but occurs again! And not only with Apache, also connecting using SSH takes a tremendous time, sometimes it takes up to 15 seconds before the keyphrase is asked for. Also scp works very slowly. The behavious is really unpredoctable and makes the server very hard to use. Any ideas...?

    Read the article

  • How to reach a Global Scope IPv6 host?

    - by Vaibhav Bajpai
    I have setup DNS64+NAT64 on a machine with 2 interfaces: eth0: public IPv4 address (connected to outside world) eth1: global scope IPv6 address: 2001::/64 I can successfully use ping6 google.com on this machine. Now I want to connect my MacBook to this machine by making it an IPv6-only client and perform some tests, but I do not have an IPv6 address assigned on this MacBook. I'm wondering, how should I manually assign one so as to route all my IPv6 traffic (I will disable IPv4 on my MacBook) to this machine, which will be picked up by DNS64+NAT64 to be converted to IPv4 requests and sent to the outside world?

    Read the article

  • How do you pick what server setup you need?

    - by ed209
    I recently started receiving pubsub data feed from etsy. It averages around 250 notifications per minute. But obviously, when the USA wakes up that spikes quite heavily. I want to be able to deal with those spikes (about 3 per day) but the rest of day is fine. What's the best method of getting the right server configuration. My current approach is to keep upgrading until the server stops dying... next leap is: Processor: AMD Phenom II X6-1055T HEXA Core RAM: 4GB DDR2 SDRAM HD1: SATA Drive (7,200 rpm) (+500 GB 7200 RPM SATA hard drive) HD2: SATA Backup Drive (+500 GB SATA (7,200 rpm)) OS: Linux OS (+CentOS 5 64-bit) Bandwidth: 6000GB Monthly Transfer (3000 in + 3000 out) (+100M uplink port) What's the best approach to working out what sort of server setup you need?

    Read the article

  • Windows 7 + Bind on Ubuntu - DNS keeps stopping

    - by fistameeny
    I have a Bind DNS server running from Ubuntu 12.04 LTS Server 64 bit. In there, I've setup some local A records for internal websites, e.g. wiki.domain.local. Everything works fine, except that every so often (a few times a day), the DNS stops responding on client machines (running Windows 7). The only way I've found to fix it is to stop/start the dnscache service on the Windows machine. Sometimes if I just wait for a few minutes, the DNS will start to work again. I've checked the Windows event log and can't see anything relevant. I've also had a look in the Bind logs and can't see anything there. Has anyone experienced this before?

    Read the article

  • Default maximum heap size -- Ubuntu 10.04 LTS, openjdk6-jre

    - by sachin
    I just installed openjdk6-jre on Ubuntu 10.04 java version "1.6.0_20" OpenJDK Runtime Environment (IcedTea6 1.9.2) (6b20-1.9.2-0ubuntu1~10.04.1) OpenJDK 64-Bit Server VM (build 19.0-b09, mixed mode) Every time I run "java" I get this error: Error occurred during initialization of VM Could not reserve enough space for object heap Could not create the Java virtual machine. This can be solved by specifying a maximum heap size and running "java -Xmx256m" But is there anyway to permanently fix this error (i.e. set the default heap size to 256MB so that I do not need to specify the max heap size every time I run the command)

    Read the article

  • Google Chrome pinned to Windows 7 taskbar not opening under pinned icon

    - by Slothsberry
    I have both Google Chrome and Eclipse pinned to my taskbar in Windows 7 64-Bit. However, when I launch these programs, they don't appear to open under the pinned taskbar icon Eclipse behaves similarly. The Eclipse launcher/workspace selector is under the pinned icon, but once the IDE opens, it moves from the pinned icon, to a new group at the end of the taskbar. Unpinning/repinning doesn't seem to do the trick. It's bothersome to have taskbar space wasted on both the launcher icon, and the window button. Anybody have an idea how to get normal behavior out of the taskbar?

    Read the article

  • phpmyadmin error #2002 cannot connect to mysql server

    - by Joe
    so i am getting this error when trying to connect to my mysql server. i have reinstalled MYSQL and php several times and tried a slew of command line work from info around the web.mysql is running and i know that my mysql.sock exists and is located in ~/private/tmp/ and also in ~/tmp/. i also have plenty of hard drive space. i have installed and setup phpmyadmin correctly only adding a password to 'Password for config auth'. AND i have connected to the server via Sequel Pro. so my question is what the heck is going on that i can't connect to the server via phpmyadmin? any guesses? also i'm on a 64-bit intel mac running snow leopard

    Read the article

  • Xen DomU does not have network connectivity

    - by Prakashkumar Thiagarajan
    I am trying to install Xen on my Fedora box. Dom0 image has network connectivity. But when I try to create a DomU, it does not have network connectivity. I want to be able to run in bridged mode. I have the /etc/xend/xend-config.sxp file accordingly. My config file looks like kernel = "/boot/vmlinuz-2.6.18-xenU" memory = 64 name = "clientA" vif = ['bridge=xenbr0,mac=12.34.56.78.9A.BC'] root = "/dev/sda1 ro" ramdisk = "/boot/initrd-linux.img" extra = "ro selinux=0.3 initcall_debug" features = 'auto_translated_physmap' Am I missing something ?

    Read the article

  • Using openssl command line tool to encrypt/decrypt data, DES ECB

    - by smsrecv
    Hello How can I create a random 64 bit key for DEC ECB encryption/decryption, and then use the same key for encryption/decryption many times? All this must be done using openssl command line tool. In all the examples I have seen, they do not use a "key", they use "password". But I need a key - array of bytes - because I need to send it to the other party (I don't know which API they use for cryptography.) Then I need to use this key - array of bytes - to encrypt/decrypt data. Thnak you

    Read the article

  • Windows 7 on 1st Gen MacbookPro Unibody (Q4-2008) - power problems.

    - by typemismatch
    I have the first generation macbook pro, purchased Q4 2008. I've been trying to run Windows 7 and can get it all installed great with the BootCamp 3.1 64 bit drivers however ... power management isn't great. The screen and keyboard don't automatically dim - the laptop gets too hot. I noticed on some newer macbook pros that windows 7 works perfectly and the above doesn't happen. Does anyone know if there really is a hardware issue with this 1st gen or is there some firmware update I can use to fix this? Thanks!

    Read the article

< Previous Page | 213 214 215 216 217 218 219 220 221 222 223 224  | Next Page >