Search Results

Search found 56752 results on 2271 pages for 'roger patewww developerit com'.

Page 2173/2271 | < Previous Page | 2169 2170 2171 2172 2173 2174 2175 2176 2177 2178 2179 2180  | Next Page >

• Dual head setup for Ubuntu 10.04.1 and Windows XP Pro with same hardware configuration

  - by mejpark

  Hello. I have a Dell OptiPlex 360 workstation at work, with 2 x ATI RV280 [Radeon 9200 PRO] graphics cards installed, which are attached to two identical 19" HII flat panel monitors. I'm using the open source Radeon driver with Ubuntu, and the proprietary drivers with Windows. The good news is that dual head configuration works for both OSes. The bad news is, I have to use a different hardware configuration for each OS to achieve this. Hardware config #1: Dual monitors work for Windows XP Pro like this: First display -> external VGA port Second display -> DVI input on gfx card Hardware config #2: Dual monitors work for Ubuntu 10.04.1 like this: First display -> VGA port on gfx card Second display -> DVI input on gfx card I connected up the displays according to Config #2 and booted up Windows, which resulted in a mirror image on both screens. I was unable to login, as the login box was not visible. I unplugged the VGA lead from gfx card and plugged it into the external VGA port (Config #1) - Windows dual head works again, but the VGA-connected screen is not recognised by Ubuntu and remains in standby mode. Is it possible to configure a dual head setup for Ubuntu using Config #1, or am I missing something? I tried setting up dual monitors using Config #1, this morning which didn't work. By default, there is no xorg.conf file in Ubuntu 10.04.1, so I generated one using: $ sudo X :2 -configure X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-27-server i686 Ubuntu Current Operating System: Linux harrier 2.6.32-24-generic #42-Ubuntu SMP Fri Aug 20 14:24:04 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=a34c1931-98d4-4a34-880c-c227a2936c4a ro quiet splash Build Date: 21 July 2010 12:47:34PM xorg-server 2:1.7.6-2ubuntu7.3 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.2.log", Time: Mon Sep 13 10:02:02 2010 List of video drivers: apm ark intel mach64 s3virge trident mga tseng ati nouveau neomagic i740 openchrome voodoo s3 i128 radeon siliconmotion nv ztv vmware v4l chips rendition savage sisusb tdfx geode sis r128 cirrus fbdev vesa (++) Using config file: "/home/michael/xorg.conf.new" (==) Using config directory: "/usr/lib/X11/xorg.conf.d" (II) [KMS] No DRICreatePCIBusID symbol, no kernel modesetting. Xorg detected your mouse at device /dev/input/mice. Please check your config if the mouse is still not operational, as by default Xorg tries to autodetect the protocol. Xorg has configured a multihead system, please check your config. Your xorg.conf file is /home/michael/xorg.conf.new To test the server, run 'X -config /home/michael/xorg.conf.new' ddxSigGiveUp: Closing log $ sudo X -config /home/michael/xorg.conf.new Fatal server error: Server is already active for display 0 If this server is no longer running, remove /tmp/.X0-lock and start again. Please consult the The X.Org Foundation support at http://wiki.x.org for help. ddxSigGiveUp: Closing log I then booted Ubuntu in failsafe mode, dropped into root shell, and executed $ X -config /home/michael/xorg.conf.new again. The screen went blank and turned off, so I reset the machine. There must be a way round this. Any help to set up a dual head config for Ubuntu using Config #1 would be hugely appreciated. TIA, Mike

  Read the article

• Apple Airport Express, Extreme and Time Capsules, BT Home Hub, Wireless Extenders confusion

  - by Jamie Hartnoll

  I post quite frequently in Stack Overflow, but use Superuser less frequently. Mainly as I don't change hardware often and rarely have software issues! I live in a small stone cottage, and have an office in a separate building across a yard. I have a BT Homehub which is located in the cottage and a series of Ethernet cables running across the yard to the office. This is fine for my wired stuff. My main office computers are PCs running Windows 7 Ultimate, and one on Win7 Home, all working fine. I also have an old laptop on Win XP which works fine wirelessly in the house for those evenings in front of the TV catching up on a bit of work. I also have an iPhone and an iPad. Recently, I have been trying to get WiFi in the office so I can use Adobe Shadow (or whatever it now is!) to improve mobile web development efficiency using my iPhone and iPad, so I bought this: http://www.ebuyer.com/393462-zyxel-wre2205-500mbps-powerline-wireless-n300-range-extender-wre2205-gb0101f Thinking that would be lovely just plugged into the socket by the door in the office, extending the perimeter of the WiFi from my Homehub. I can't get it to work properly! If I plug a laptop into its ethernet port I can get it to connect to the Homehub and give me a kinda of wired, wireless extender. If, however, I plug the ethernet port into my home hub, it then seems to extend the network, but only my iOs devices work, and all my wired stuff stops working, and seems to create an infinite loop where windows connects to my homehob, and then rather to the internet, it then connects back to the extender thing. Anyway... in the meantime, I took a fatal trip to the Apple Store, where I purchased an Airport Express... solely for the purpose of hooking my iOs devices up as wireless music players in the house. I knew it had WiFi, but didn't want to use that part as an extender, I didn't think it would work on a Homehub anyway. It doesn't work on a Homehub! I now have a new wireless network in the house, which, when anything connects to it cannot connect to the Internet, so it works ONLY as a wireless music player. I then borrowed some Powerline Adaptors from someone and realised that this whole thing was getting totally out of control! It seems all the technology is out there but it's so complicated to get the right series of devices. To further add to the confusion, I wouldn't mind a network hard drive. I bought one that broke and lost everything, so now we're on to looking at the Apple Time Capsules. So my question is... IF... I buy an Apple Time Capsule, can I: Hook that up to my Homehub, leaving the homehub connected to the Internet so my Hub phones still work, then disable wireless on the homehub Link up my Airport Express to the Time Capsule PROPERLY so it will connect to the Internet Do the above with an Apple TV box should I buy one in future Use the Time Capsule as a network hard drive to store video and music that can be viewed/listened to via my iOS devices/Apple TV/Aiport Express anywhere even with my main PC off (this currently stores all this data) Hope that the IOS devices like the WiFi from the TimeCapsule better than the Homehub and work without extension, or buy another Airport Express to get WiFI in the office. Or... should I buy an Airport Extreme and use a USB hard drive for the network drive?

  Read the article

• Problem Disabling Roaming Profiles on Grouped Users

  - by user43207

  I'm having some serious issues getting a group of users to stop using roaming profiles. As expected, I have roaming profiles enabled accross the domain. - But am doing GPO filtering, limiting the scope. I originally had it set to authenticated users for Roaming, but as the domain has branched out to multiple locations, I've limited the scope to only people that are near the central office. The GPO that I have linked filtered to a group I have created that include users that I don't want to have roaming profiles. This GPO is sitting at the root of the domain, with the "Forced" setting enabled, so it should override any setting below it. *On a side note, it is the ONLY GPO that I have set to "Forced" right now. I know the GPO is working, since I can see the original registy settings on a user that logged in under roaming profiles - and then that same user logging in after I made the Group Policy changes, the registry reflects a local profile. But unfortunately, even after making those settings - the user is given a roaming profile on one of the servers. A gpresult of that same user account (after the updated gpo) is listed in the code block below. You can see right at the top of that output, that it is infact dealing with a roaming profile. - And sure enough, on the server that's hosting the file share for roaming profiles, it creates a folder for the user once they log in. For testing purposes, I've deleted all copies of the user's profile, roaming and local. But the problem is still here. - So I'm aparently missing something in the group policy settings on a wider scale. Would anybody be able to point me in the direction of what I'm missing here? *gpresult /r*** Microsoft (R) Windows (R) Operating System Group Policy Result tool v2.0 Copyright (C) Microsoft Corp. 1981-2001 Created On 5/15/2010 at 8:59:00 AM RSOP data for ** on * : Logging Mode OS Configuration: Member Workstation OS Version: 6.1.7600 Site Name: N/A Roaming Profile: \\profiles$** Local Profile: C:\Users*** Connected over a slow link?: No USER SETTINGS CN=*****,OU=*****,OU=*****,OU=*****,DC=*****,DC=***** Last time Group Policy was applied: 5/15/2010 at 8:52:02 AM Group Policy was applied from: *****.*****.com Group Policy slow link threshold: 500 kbps Domain Name: USSLINDSTROM Domain Type: Windows 2000 Applied Group Policy Objects ----------------------------- ForceLocalProfilesOnly InternetExplorer_***** GlobalPasswordPolicy The following GPOs were not applied because they were filtered out ------------------------------------------------------------------- DAgentFirewallExceptions Filtering: Denied (Security) WSAdmin_***** Filtering: Denied (Security) NetlogonFirewallExceptions Filtering: Not Applied (Empty) NetLogon_***** Filtering: Denied (Security) WSUSUpdateScheduleManualInstall Filtering: Denied (Security) WSUSUpdateScheduleDaily_0300 Filtering: Denied (Security) WSUSUpdateScheduleThu_0100 Filtering: Denied (Security) AlternateSSLFirewallExceptions Filtering: Denied (Security) SNMPFirewallExceptions Filtering: Denied (Security) WSUSUpdateScheduleSun_0100 Filtering: Denied (Security) SQLServerFirewallExceptions Filtering: Denied (Security) WSUSUpdateScheduleTue_0100 Filtering: Denied (Security) WSUSUpdateScheduleSat_0100 Filtering: Denied (Security) DisableUAC Filtering: Denied (Security) ICMPFirewallExceptions Filtering: Denied (Security) AdminShareFirewallExceptions Filtering: Denied (Security) GPRefreshInterval Filtering: Denied (Security) ServeRAIDFirewallExceptions Filtering: Denied (Security) WSUSUpdateScheduleFri_0100 Filtering: Denied (Security) BlockFirewallExceptions(8400-8410) Filtering: Denied (Security) WSUSUpdateScheduleWed_0100 Filtering: Denied (Security) Local Group Policy Filtering: Not Applied (Empty) WSUS_***** Filtering: Denied (Security) LogonAsService_Idaho Filtering: Denied (Security) ReportServerFirewallExceptions Filtering: Denied (Security) WSUSUpdateScheduleMon_0100 Filtering: Denied (Security) TFSFirewallExceptions Filtering: Denied (Security) Default Domain Policy Filtering: Not Applied (Empty) DenyServerSideRoamingProfiles Filtering: Denied (Security) ShareConnectionsRemainAlive Filtering: Denied (Security) The user is a part of the following security groups --------------------------------------------------- Domain Users Everyone BUILTIN\Users BUILTIN\Administrators NT AUTHORITY\INTERACTIVE CONSOLE LOGON NT AUTHORITY\Authenticated Users This Organization LOCAL *****Users VPNAccess_***** NetAdmin_***** SiteAdmin_***** WSAdmin_***** VPNAccess_***** LocalProfileOnly_***** NetworkAdmin_***** LocalProfileOnly_***** VPNAccess_***** NetAdmin_***** Domain Admins WSAdmin_***** WSAdmin_***** ***** ***** Schema Admins ***** Enterprise Admins Denied RODC Password Replication Group High Mandatory Level

  Read the article

• Running two wsgi applications on the same server gdal org exception with apache2/modwsgi

  - by monkut

  I'm trying to run two wsgi applications, one django and the other tilestache using the same server. The tilestache server accesses the db via django to query the db. In the process of serving tiles it performs a transform on the incoming bbox, and in this process hit's the following error. The transform works without error for the specific bbox polygon when run manually from the python shell: Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/TileStache/__init__.py", line 325, in __call__ mimetype, content = requestHandler(self.config, environ['PATH_INFO'], environ['QUERY_STRING']) File "/usr/lib/python2.7/dist-packages/TileStache/__init__.py", line 231, in requestHandler mimetype, content = getTile(layer, coord, extension) File "/usr/lib/python2.7/dist-packages/TileStache/__init__.py", line 84, in getTile tile = layer.render(coord, format) File "/usr/lib/python2.7/dist-packages/TileStache/Core.py", line 295, in render tile = provider.renderArea(width, height, srs, xmin, ymin, xmax, ymax, coord.zoom) File "/var/www/tileserver/providers.py", line 59, in renderArea bbox.transform(METERS_SRID) File "/usr/local/lib/python2.7/dist-packages/django/contrib/gis/geos/geometry.py", line 520, in transform g = gdal.OGRGeometry(self.wkb, srid) File "/usr/local/lib/python2.7/dist-packages/django/contrib/gis/gdal/geometries.py", line 131, in __init__ self.__class__ = GEO_CLASSES[self.geom_type.num] File "/usr/local/lib/python2.7/dist-packages/django/contrib/gis/gdal/geometries.py", line 245, in geom_type return OGRGeomType(capi.get_geom_type(self.ptr)) File "/usr/local/lib/python2.7/dist-packages/django/contrib/gis/gdal/geomtype.py", line 43, in __init__ raise OGRException('Invalid OGR Integer Type: %d' % type_input) OGRException: Invalid OGR Integer Type: 1987180391 I think I've hit the non thread safe issue with GDAL, metioned on the django site. Is there a way I could configure this so that it would work? Apache Version: Apache/2.2.22 (Ubuntu) mod_wsgi/3.3 Python/2.7.3 configured Apache apache2/sites-available/default: <VirtualHost *:80> ServerAdmin ironman@localhost DocumentRoot /var/www/bin LogLevel warn WSGIDaemonProcess lbs processes=2 maximum-requests=500 threads=1 WSGIProcessGroup lbs WSGIScriptAlias / /var/www/bin/apache/django.wsgi Alias /static /var/www/lbs/static/ </VirtualHost> <VirtualHost *:8080> ServerAdmin ironman@localhost DocumentRoot /var/www/bin LogLevel warn WSGIDaemonProcess tilestache processes=1 maximum-requests=500 threads=1 WSGIProcessGroup tilestache WSGIScriptAlias / /var/www/bin/tileserver/tilestache.wsgi </VirtualHost> Django Version: 1.4 httpd.conf: Listen 8080 NameVirtualHost *:8080 UPDATE I've added the a test.wsgi script to determine if the GLOBAL interpreter setting is correct, as mentioned by graham and described here: http://code.google.com/p/modwsgi/wiki/CheckingYourInstallation#Sub_Interpreter_Being_Used It seems to show the expected result: [Tue Aug 14 10:32:01 2012] [notice] Apache/2.2.22 (Ubuntu) mod_wsgi/3.3 Python/2.7.3 configured -- resuming normal operations [Tue Aug 14 10:32:01 2012] [info] mod_wsgi (pid=29891): Attach interpreter ''. I've worked around the issue for now by changing the srs used in the db so that the transform is unnecessary in tilestache app. I don't understand why the transform() method, when called in the django app works, but then in the tilestache app fails. tilestache.wsgi #!/usr/bin/python import os import time import sys import TileStache current_dir = os.path.abspath(os.path.dirname(__file__)) project_dir = os.path.realpath(os.path.join(current_dir, "..", "..")) sys.path.append(project_dir) sys.path.append(current_dir) os.environ['DJANGO_SETTINGS_MODULE'] = 'bin.settings' sys.stdout = sys.stderr # wait for the apache django lbs server to start up, # --> in order to retrieve the tilestache cfg time.sleep(2) tilestache_config_url = "http://127.0.0.1/tilestache/config/" application = TileStache.WSGITileServer(tilestache_config_url) UPDATE 2 So it turned out I did need to use a projection other than the google (900913) one in the db. So my previous workaround failed. While I'd like to fix this issue, I decided to work around the issue this type by making a django view that performs the transform needed. So now tilestache requests the data through the django app and not internally.

  Read the article

• Does likewise-open > version 5.4 contain CIFS support?

  - by Ben Andken

  I'm trying to get the CIFS server working in likewise-open. I've found this set of instructions and everything seems to work until I try to connect ([url]http://www.likewise.com/resources/documentation_library/manuals/cifs/likewise-cifs-smb-file-server-guide.html#id2765992):[/url] 1.6. Build and Configure a Standalone Likewise-CIFS Server This section demonstrates how to build and configure a standalone instance of Likewise-CIFS from the command line. The following procedure assumes that you want to set up Likewise-CIFS on a Linux server to share files with Windows computers in a network without Active Directory. This procedure also assumes you know how to build Linux applications from their source code and then install them. Download Likewise-CIFS from its open source git location: $ git clone git://git.likewiseopen.org/ Download, build, and install the following tools. The tools listed are known to work, but earlier or later versions might work as well. Also, instead of downloading the tools, you might be able to install them on your platform with apt-get or some other means. http://ftp.gnu.org/gnu/autoconf/autoconf-2.65.tar.gz http://ftp.gnu.org/gnu/automake/automake-1.9.6.tar.gz http://ftp.gnu.org/gnu/libtool/libtool-2.2.6a.tar.gz http://pkgconfig.freedesktop.org/releases/pkg-config-0.23.tar.gz gcc --version 3.x or greater Build Likewise-CIFS: $ cd likewise-open $ build/mkcomp --debug all Install Likewise-CIFS: $ sudo su $ cd staging/install-root $ tar cf - . | (cd / && tar xvf -) Make sure Samba is not running: $ /etc/init.d/smb stop Make sure SELinux is either disabled or set to permissive. Make sure the ports required by Likewise are open. For a list of ports that Likewise uses, see the Likewise Open Installation and Administration Guide. Configure Likewise Open: $ /etc/init.d/lwsmd start $ for i in /etc/likewise/*.reg; do /opt/likewise/bin/lwregshell upgrade $i; done $ /etc/init.d/lwsmd stop $ /etc/init.d/lwsmd start $ /opt/likewise/bin/lwsm start srvsvc $ /opt/likewise/bin/domainjoin-cli configure --enable nsswitch Add a user account to the local Likewise provider database. In the following example, substitute the account name that you want for newuser. $ /opt/likewise/bin/lw-add-user --home /home/newuser --shell /bin/bash newuser Successfully added user newuser Enable the user and set the password: $ /opt/likewise/bin/lw-mod-user --enable-user --set-password newuser New Password: ********** Successfully modified user newuser Look up new user's identity as follows. Substitute the value from the command hostname -s for the hostname. Keep in mind that Likewise truncates a hostname longer than 15 characters to the first 15 characters of the string. % id hostname\\newuser uid=2000(HOSTNAME\newuser) gid=1800(HOSTNAME\Likewise Users) groups=1800(HOSTNAME\Likewise Users) context=system_u:system_r:unconfined_t:s0 Make a CIFS directory for the user: mkdir /lwcifs/newuser chown 2000:1800 /lwcifs/newuser From a Windows computer, map the Likewise-CIFS drive share: Computer->Map Network Drive... Folder: \\IP_hostname\c$ Click "Finish" Username: hostname\newuser Password: user_password The last step fails when I try to connect. I've tried with Windows XP Pro and Windows 7 Pro. The rest of the directions only appear to work for version 5.4 (the one that shipped with 10.04). For 12.04, version 6.1 is the only one available and it doesn't appear to have the srvsvc module mentioned in these instructions. Is CIFS support dropped in the 6.1 version of likewise-open?

  Read the article

• Connection Reset on MySQL query

  - by sunwukung

  OK, I'm flummoxed.(i've asked this question over on Stack too - but I need to get it fixed so I'm asking here too - any help is GREATLY appreciated) I'm trying to execute a query on a database (locally) and I keep getting a connection reset error. I've been using the method below in a generic DAO class to build a query string and pass to Zend_Db API. public function insert($params) { $loop = false; $keys = $values = ''; foreach($params as $k => $v){ if($loop == true){ $keys .= ','; $values .= ','; } $keys .= $this->db->quoteIdentifier($k); $values .= $this->db->quote($v); $loop = true; } $sql = "INSERT INTO " . $this->table_name . " ($keys) VALUES ($values)"; //formatResult returns an array of info regarding the status and any result sets of the query //I've commented that method call out anyway, so I don't think it's that try { $this->db->query($sql); return $this->formatResult(array( true, 'New record inserted into: '.$this->table_name )); }catch(PDOException $e) { return $this->formatResult($e); } } So far, this has worked fine - the errors have been occurring since we generated new tables to record user input. The insert string looks like this: INSERT INTO tablename(`id`,`title`,`summary`,`description`,`keywords`,`type_id`,`categories`) VALUES ('5539','Sample Title','Sample content',' \'Lorem ipsum dolor sit amet, consectetur adipiscing elit. In et pellentesque mauris. Curabitur hendrerit, leo id ultrices pellentesque, est purus mattis ligula, vitae imperdiet neque ligula bibendum sapien. Curabitur aliquet nisi et odio pharetra tincidunt. Phasellus sed iaculis nisl. Fusce commodo mauris et purus vehicula dictum. Nulla feugiat molestie accumsan. Donec fermentum libero in risus tempus elementum aliquam et magna. Fusce vitae sem metus. Aenean commodo pharetra risus, nec pellentesque augue ullamcorper nec. Class aptent taciti sociosqu ad litora torquent per conubia nostra, per inceptos himenaeos. Nullam vel elit libero. Vestibulum in turpis nunc.\'','this,is,a,sample,array',1,'category title') Here are the parameters it's getting before assembling the query (var_dump): array 'id' => string '1' (length=4) 'title' => string 'Sample Title' (length=12) 'summary' => string 'Sample content' (length=14) 'description' => string '<p>'Lorem ipsum dolor sit amet, consectetur adipiscing elit. In et pellentesque mauris. Curabitur hendrerit, leo id ultrices pellentesque, est purus mattis ligula, vitae imperdiet neque ligula bibendum sapien. Curabitur aliquet nisi et odio pharetra tincidunt. Phasellus sed iaculis nisl. Fusce commodo mauris et purus vehicula dictum. Nulla feugiat molestie accumsan. Donec fermentum libero in risus tempus elementum aliquam et magna. Fusce vitae sem metus. Aenean commodo pharetra risus, nec pellentesque augue'... (length=677) 'keywords' => string 'this,is,a,sample,array' (length=22) 'type_id' => int 1 'categories' => string 'category title' (length=43) The next port of call was checking the limits on the table, since it seems to insert if the length of "description" is around the 300 mark (it varies between 310 - 330). The field limit is set to VARCHAR(1500) and the validation on this field won't allow anything past bigger than 1200 with HTML, 800 without. The real kicker is that if I take this sql string and execute it via the command line, it works fine - so I can't for the life of me figure out what's wrong. I've tried extending the server parameters i.e. http://stackoverflow.com/questions/1964554/unexpected-connection-reset-a-php-or-an-apache-issue So, in a nutshell, I'm stumped. Any ideas?

  Read the article

• Standard Oracle Fusion Middleware Installation fails on SOA ManagedServer start due to classpath pro

  - by Neuquino

  Hi, Trying to install Oracle Fusion Middleware 11gR2 on windows (same thing happens on Linux). I have followed the guidelines provided in the http://download.oracle.com/docs/cd/E12839_01/install.1111/e14318/toc.htm Installing the weblogic (11g) Oracle 11g databse installation Running the RCU utility to create schema Installed and copied relevant files for Java Bridge Configure the Fusion Middleware But i found that the SOA server is not getting up in the enterprise manager its showing as down. When i checked the logs iam getting the following error: oracle.jrf.wls.JRFStartup java.lang.ClassNotFoundException: oracle.jrf.wls.JRFStartup at java.lang.Class.forName0(Native Method) at java.lang.Class.forName(Class.java:247) at weblogic.management.deploy.classdeployment.ClassDeploymentManager.invokeClass(ClassDeploymentManager.java:253) at weblogic.management.deploy.classdeployment.ClassDeploymentManager.access$000(ClassDeploymentManager.java:54) at weblogic.management.deploy.classdeployment.ClassDeploymentManager$1.run(ClassDeploymentManager.java:205) Truncated. see log file for complete stacktrace <Jul 7, 2009 4:18:48 PM CEST> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "SOAStartupClass", java.lang.ClassNotFoundException: oracle.bpel.services.common.util.GenerateBPMCryptoKey java.lang.ClassNotFoundException: oracle.bpel.services.common.util.GenerateBPMCryptoKey at java.lang.Class.forName0(Native Method) at java.lang.Class.forName(Class.java:247) at weblogic.management.deploy.classdeployment.ClassDeploymentManager.invokeClass(ClassDeploymentManager.java:253) at weblogic.management.deploy.classdeployment.ClassDeploymentManager.access$000(ClassDeploymentManager.java:54) at weblogic.management.deploy.classdeployment.ClassDeploymentManager$1.run(ClassDeploymentManager.java:205) Truncated. see log file for complete stacktrace <Jul 7, 2009 4:19:27 PM CEST> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'SocketAdapter' due to error weblogic.application.ModuleException: The ra.xml <connectionfactory-impl-class> class 'oracle.tip.adapter.socket.SocketConnectionFactory' could not be loaded from the resource adapter archive/application because of the following error: java.lang.NoClassDefFoundError: oracle/tip/adapter/api/OracleConnectionFactory.weblogic.application.ModuleException: The ra.xml <connectionfactory-impl-class> class 'oracle.tip.adapter.socket.SocketConnectionFactory' could not be loaded from the resource adapter archive/application because of the following error: java.lang.NoClassDefFoundError: oracle/tip/adapter/api/OracleConnectionFactory at weblogic.connector.deploy.ConnectorModule.prepare(ConnectorModule.java:228) at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93) at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37) at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58) Truncated. see log file for complete stacktrace <Jul 7, 2009 4:19:27 PM CEST> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'MQSeriesAdapter' due to error weblogic.application.ModuleException: The ra.xml <connectionfactory-impl-class> class 'oracle.tip.adapter.mq.ConnectionFactoryImpl' could not be loaded from the resource adapter archive/application because of the following error: java.lang.NoClassDefFoundError: oracle/tip/adapter/api/OracleConnectionFactory.weblogic.application.ModuleException: The ra.xml <connectionfactory-impl-class> class 'oracle.tip.adapter.mq.ConnectionFactoryImpl' could not be loaded from the resource adapter archive/application because of the following error: java.lang.NoClassDefFoundError: oracle/tip/adapter/api/OracleConnectionFactory at weblogic.connector.deploy.ConnectorModule.prepare(ConnectorModule.java:228) at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93) at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37) at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58) Truncated. see log file for complete stacktrace <Jul 7, 2009 4:19:27 PM CEST> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'OracleAppsAdapter' due to error weblogic.application.ModuleException: java.lang.NoClassDefFoundError: oracle/tip/adapter/api/exception/PCResourceException.weblogic.application.ModuleException: java.lang.NoClassDefFoundError: oracle/tip/adapter/api/exception/PCResourceException at weblogic.connector.deploy.ConnectorModule.prepare(ConnectorModule.java:238) at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93) at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37) at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58) Truncated. see log file for complete stacktrace java.lang.NoClassDefFoundError: oracle/tip/adapter/api/exception/PCResourceException at java.lang.Class.getDeclaredMethods0(Native Method) at java.lang.Class.privateGetDeclaredMethods(Class.java:2427) at java.lang.Class.privateGetPublicMethods(Class.java:2547) at java.lang.Class.getMethods(Class.java:1410) at weblogic.connector.external.impl.RAComplianceChecker.checkOverrides(RAComplianceChecker.java:972) Truncated. see log file for complete stacktrace Can any one please tell me if i have missed any steps? thanks and regards, Naveen

  Read the article

• Standard Oracle Fusion Middleware Installation fails on SOA ManagedServer start

  - by Neuquino

  Hi, Trying to install Oracle Fusion Middleware 11gR2 on windows (same thing happens on Linux). I have followed the guidelines provided in the http://download.oracle.com/docs/cd/E12839_01/install.1111/e14318/toc.htm Installing the weblogic (11g) Oracle 11g databse installation Running the RCU utility to create schema Installed and copied relevant files for Java Bridge Configure the Fusion Middleware But i found that the SOA server is not getting up in the enterprise manager its showing as down. When i checked the logs iam getting the following error: oracle.jrf.wls.JRFStartup java.lang.ClassNotFoundException: oracle.jrf.wls.JRFStartup at java.lang.Class.forName0(Native Method) at java.lang.Class.forName(Class.java:247) at weblogic.management.deploy.classdeployment.ClassDeploymentManager.invokeClass(ClassDeploymentManager.java:253) at weblogic.management.deploy.classdeployment.ClassDeploymentManager.access$000(ClassDeploymentManager.java:54) at weblogic.management.deploy.classdeployment.ClassDeploymentManager$1.run(ClassDeploymentManager.java:205) Truncated. see log file for complete stacktrace <Jul 7, 2009 4:18:48 PM CEST> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "SOAStartupClass", java.lang.ClassNotFoundException: oracle.bpel.services.common.util.GenerateBPMCryptoKey java.lang.ClassNotFoundException: oracle.bpel.services.common.util.GenerateBPMCryptoKey at java.lang.Class.forName0(Native Method) at java.lang.Class.forName(Class.java:247) at weblogic.management.deploy.classdeployment.ClassDeploymentManager.invokeClass(ClassDeploymentManager.java:253) at weblogic.management.deploy.classdeployment.ClassDeploymentManager.access$000(ClassDeploymentManager.java:54) at weblogic.management.deploy.classdeployment.ClassDeploymentManager$1.run(ClassDeploymentManager.java:205) Truncated. see log file for complete stacktrace <Jul 7, 2009 4:19:27 PM CEST> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'SocketAdapter' due to error weblogic.application.ModuleException: The ra.xml <connectionfactory-impl-class> class 'oracle.tip.adapter.socket.SocketConnectionFactory' could not be loaded from the resource adapter archive/application because of the following error: java.lang.NoClassDefFoundError: oracle/tip/adapter/api/OracleConnectionFactory.weblogic.application.ModuleException: The ra.xml <connectionfactory-impl-class> class 'oracle.tip.adapter.socket.SocketConnectionFactory' could not be loaded from the resource adapter archive/application because of the following error: java.lang.NoClassDefFoundError: oracle/tip/adapter/api/OracleConnectionFactory at weblogic.connector.deploy.ConnectorModule.prepare(ConnectorModule.java:228) at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93) at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37) at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58) Truncated. see log file for complete stacktrace <Jul 7, 2009 4:19:27 PM CEST> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'MQSeriesAdapter' due to error weblogic.application.ModuleException: The ra.xml <connectionfactory-impl-class> class 'oracle.tip.adapter.mq.ConnectionFactoryImpl' could not be loaded from the resource adapter archive/application because of the following error: java.lang.NoClassDefFoundError: oracle/tip/adapter/api/OracleConnectionFactory.weblogic.application.ModuleException: The ra.xml <connectionfactory-impl-class> class 'oracle.tip.adapter.mq.ConnectionFactoryImpl' could not be loaded from the resource adapter archive/application because of the following error: java.lang.NoClassDefFoundError: oracle/tip/adapter/api/OracleConnectionFactory at weblogic.connector.deploy.ConnectorModule.prepare(ConnectorModule.java:228) at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93) at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37) at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58) Truncated. see log file for complete stacktrace <Jul 7, 2009 4:19:27 PM CEST> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'OracleAppsAdapter' due to error weblogic.application.ModuleException: java.lang.NoClassDefFoundError: oracle/tip/adapter/api/exception/PCResourceException.weblogic.application.ModuleException: java.lang.NoClassDefFoundError: oracle/tip/adapter/api/exception/PCResourceException at weblogic.connector.deploy.ConnectorModule.prepare(ConnectorModule.java:238) at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93) at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37) at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58) Truncated. see log file for complete stacktrace java.lang.NoClassDefFoundError: oracle/tip/adapter/api/exception/PCResourceException at java.lang.Class.getDeclaredMethods0(Native Method) at java.lang.Class.privateGetDeclaredMethods(Class.java:2427) at java.lang.Class.privateGetPublicMethods(Class.java:2547) at java.lang.Class.getMethods(Class.java:1410) at weblogic.connector.external.impl.RAComplianceChecker.checkOverrides(RAComplianceChecker.java:972) Truncated. see log file for complete stacktrace Can any one please tell me if i have missed any steps? thanks and regards, Naveen

  Read the article

• Custom fail2ban Filter

  - by Michael Robinson

  In my quest to block excessive failed phpMyAdmin login attempts with fail2ban, I've created a script that logs said failed attempts to a file: /var/log/phpmyadmin_auth.log Custom log The format of the /var/log/phpmyadmin_auth.log file is: phpMyadmin login failed with username: root; ip: 192.168.1.50; url: http://somedomain.com/phpmyadmin/index.php phpMyadmin login failed with username: ; ip: 192.168.1.50; url: http://192.168.1.48/phpmyadmin/index.php Custom filter [Definition] # Count all bans in the logfile failregex = phpMyadmin login failed with username: .*; ip: <HOST>; phpMyAdmin jail [phpmyadmin] enabled = true port = http,https filter = phpmyadmin action = sendmail-whois[name=HTTP] logpath = /var/log/phpmyadmin_auth.log maxretry = 6 The fail2ban log contains: 2012-10-04 10:52:22,756 fail2ban.server : INFO Stopping all jails 2012-10-04 10:52:23,091 fail2ban.jail : INFO Jail 'ssh-iptables' stopped 2012-10-04 10:52:23,866 fail2ban.jail : INFO Jail 'fail2ban' stopped 2012-10-04 10:52:23,994 fail2ban.jail : INFO Jail 'ssh' stopped 2012-10-04 10:52:23,994 fail2ban.server : INFO Exiting Fail2ban 2012-10-04 10:52:24,253 fail2ban.server : INFO Changed logging target to /var/log/fail2ban.log for Fail2ban v0.8.6 2012-10-04 10:52:24,253 fail2ban.jail : INFO Creating new jail 'ssh' 2012-10-04 10:52:24,253 fail2ban.jail : INFO Jail 'ssh' uses poller 2012-10-04 10:52:24,260 fail2ban.filter : INFO Added logfile = /var/log/auth.log 2012-10-04 10:52:24,260 fail2ban.filter : INFO Set maxRetry = 6 2012-10-04 10:52:24,261 fail2ban.filter : INFO Set findtime = 600 2012-10-04 10:52:24,261 fail2ban.actions: INFO Set banTime = 600 2012-10-04 10:52:24,279 fail2ban.jail : INFO Creating new jail 'ssh-iptables' 2012-10-04 10:52:24,279 fail2ban.jail : INFO Jail 'ssh-iptables' uses poller 2012-10-04 10:52:24,279 fail2ban.filter : INFO Added logfile = /var/log/auth.log 2012-10-04 10:52:24,280 fail2ban.filter : INFO Set maxRetry = 5 2012-10-04 10:52:24,280 fail2ban.filter : INFO Set findtime = 600 2012-10-04 10:52:24,280 fail2ban.actions: INFO Set banTime = 600 2012-10-04 10:52:24,287 fail2ban.jail : INFO Creating new jail 'fail2ban' 2012-10-04 10:52:24,287 fail2ban.jail : INFO Jail 'fail2ban' uses poller 2012-10-04 10:52:24,287 fail2ban.filter : INFO Added logfile = /var/log/fail2ban.log 2012-10-04 10:52:24,287 fail2ban.filter : INFO Set maxRetry = 3 2012-10-04 10:52:24,288 fail2ban.filter : INFO Set findtime = 604800 2012-10-04 10:52:24,288 fail2ban.actions: INFO Set banTime = 604800 2012-10-04 10:52:24,292 fail2ban.jail : INFO Jail 'ssh' started 2012-10-04 10:52:24,293 fail2ban.jail : INFO Jail 'ssh-iptables' started 2012-10-04 10:52:24,297 fail2ban.jail : INFO Jail 'fail2ban' started When I issue: sudo service fail2ban restart fail2ban emails me to say ssh has restarted, but I receive no such email about my phpmyadmin jail. Repeated failed logins to phpMyAdmin does not cause an email to be sent. Have I missed some critical setup? Is my filter's regular expression wrong? Update: added changes from default installation Starting with a clean fail2ban installation: cp /etc/fail2ban/jail.conf /etc/fail2ban/jail.local Change email address to my own, action to: action = %(action_mwl)s Append the following to jail.local [phpmyadmin] enabled = true port = http,https filter = phpmyadmin action = sendmail-whois[name=HTTP] logpath = /var/log/phpmyadmin_auth.log maxretry = 4 Add the following to /etc/fail2ban/filter.d/phpmyadmin.conf # phpmyadmin configuration file # # Author: Michael Robinson # [Definition] # Option: failregex # Notes.: regex to match the password failures messages in the logfile. The # host must be matched by a group named "host". The tag "<HOST>" can # be used for standard IP/hostname matching and is only an alias for # (?:::f{4,6}:)?(?P<host>\S+) # Values: TEXT # # Count all bans in the logfile failregex = phpMyadmin login failed with username: .*; ip: <HOST>; # Option: ignoreregex # Notes.: regex to ignore. If this regex matches, the line is ignored. # Values: TEXT # # Ignore our own bans, to keep our counts exact. # In your config, name your jail 'fail2ban', or change this line! ignoreregex = Restart fail2ban sudo service fail2ban restart PS: I like eggs

  Read the article

• DCOM Authentication Fails to use Kerberos, Falls back to NTLM

  - by Asa Yeamans

  I have a webservice that is written in Classic ASP. In this web service it attempts to create a VirtualServer.Application object on another server via DCOM. This fails with Permission Denied. However I have another component instantiated in this same webservice on the same remote server, that is created without problems. This component is a custom-in house component. The webservice is called from a standalone EXE program that calls it via WinHTTP. It has been verified that WinHTTP is authenticating with Kerberos to the webservice successfully. The user authenticated to the webservice is the Administrator user. The EXE to webservice authentication step is successful and with kerberos. I have verified the DCOM permissions on the remote computer with DCOMCNFG. The default limits allow administrators both local and remote activation, both local and remote access, and both local and remote launch. The default component permissions allow the same. This has been verified. The individual component permissions for the working component are set to defaults. The individual component permissions for the VirtualServer.Application component are also set to defaults. Based upon these settings, the webservice should be able to instantiate and access the components on the remote computer. Setting up a Wireshark trace while running both tests, one with the working component and one with the VirtualServer.Application component reveals an intresting behavior. When the webservice is instantiating the working, custom, component, I can see the request on the wire to the RPCSS endpoint mapper first perform the TCP connect sequence. Then I see it perform the bind request with the appropriate security package, in this case kerberos. After it obtains the endpoint for the working DCOM component, it connects to the DCOM endpoint authenticating again via Kerberos, and it successfully is able to instantiate and communicate. On the failing VirtualServer.Application component, I again see the bind request with kerberos go to the RPCC endpoing mapper successfully. However, when it then attempts to connect to the endpoint in the Virtual Server process, it fails to connect because it only attempts to authenticate with NTLM, which ultimately fails, because the webservice does not have access to the credentials to perform the NTLM hash. Why is it attempting to authenticate via NTLM? Additional Information: Both components run on the same server via DCOM Both components run as Local System on the server Both components are Win32 Service components Both components have the exact same launch/access/activation DCOM permissions Both Win32 Services are set to run as Local System The permission denied is not a permissions issue as far as I can tell, it is an authentication issue. Permission is denied because NTLM authentication is used with a NULL username instead of Kerberos Delegation Constrained delegation is setup on the server hosting the webservice. The server hosting the webservice is allowed to delegate to rpcss/dcom-server-name The server hosting the webservice is allowed to delegate to vssvc/dcom-server-name The dcom server is allowed to delegate to rpcss/webservice-server The SPN's registered on the dcom server include rpcss/dcom-server-name and vssvc/dcom-server-name as well as the HOST/dcom-server-name related SPNs The SPN's registered on the webservice-server include rpcss/webservice-server and the HOST/webservice-server related SPNs Anybody have any Ideas why the attempt to create a VirtualServer.Application object on a remote server is falling back to NTLM authentication causing it to fail and get permission denied? Additional information: When the following code is run in the context of the webservice, directly via a testing-only, just-developed COM component, it fails on the specified line with Access Denied. COSERVERINFO csi; csi.dwReserved1=0; csi.pwszName=L"terahnee.rivin.net"; csi.pAuthInfo=NULL; csi.dwReserved2=NULL; hr=CoGetClassObject(CLSID_VirtualServer, CLSCTX_ALL, &csi, IID_IClassFactory, (void **) &pClsFact); if(FAILED( hr )) goto error1; // Fails here with HRESULT_FROM_WIN32(ERROR_ACCESS_DENIED) hr=pClsFact->CreateInstance(NULL, IID_IUnknown, (void **) &pUnk); if(FAILED( hr )) goto error2; Ive also noticed that in the Wireshark Traces, i see the attempt to connect to the service process component only requests NTLMSSP authentication, it doesnt even attmept to use kerberos. This suggests that for some reason the webservice thinks it cant use kerberos...

  Read the article

• How do you handle authentication across domains?

  - by William Ratcliff

  I'm trying to save users of our services from having to have multiple accounts/passwords. I'm in a large organization and there's one group that handles part of user authentication for users who are from outside the facility (primarily for administrative functions). They store a secure cookie to establish a session and communicate only via HTTPS via the browser. Sessions expire either through: 1) explicit logout of the user 2) Inactivity 3) Browser closes My team is trying to write a web application to help users analyze data that they've taken (or are currently taking) while at our facility. We need to determine if a user is 1) authenticated 2) Some identifier for that user so we can store state for them (what analysis they are working on, etc.) So, the problem is how do you authenticate across domains (the authentication server for the other application lives in a border region between public and private--we will live in the public region). We have come up with some scenarios and I'd like advice about what is best practice, or if there is one we haven't considered. Let's start with the case where the user is authenticated with the authentication server. 1) The authentication server leaves a public cookie in the browser with their primary key for a user. If this is deemed sensitive, they encrypt it on their server and we have the key to decrypt it on our server. When the user visits our site, we check for this public cookie. We extract the user_id and use a public api for the authentication server to request if the user is logged in. If they are, they send us a response with: response={ userid :we can then map this to our own user ids. If necessary, we can request additional information such as email-address/display name once (to notify them if long running jobs are done, or to share results with other people, like with google_docs). account_is_active:Make sure that the account is still valid session_is_active: Is their session still active? If we query this for a valid user, this will have a side effect that we will reset the last_time_session_activated value and thus prolong their session with the authentication server last_time_session_activated: let us know how much time they have left ip_address_session_started_from:make sure the person at our site is coming from the same ip as they started the session at } Given this response, we either accept them as authenticated and move on with our app, or redirect them to the login page for the authentication server (question: if we give an encrypted portion of the response (signed by us) with the page to redirect them to, do we open any gaping security holes in the authentication server)? The flaw that we've found with this is that if the user visits evilsite.com and they look at the session cookie and send a query to the public api of the authentication server, they can keep the session alive and if our original user leaves the machine without logging out, then the next user will be able to access their session (this was possible before, but having the session alive eternally makes this worse). 2) The authentication server redirects all requests made to our domain to us and we send responses back through them to the user. Essentially, they act as a proxy. The advantage of this is that we can handshake with the authentication server, so it's safe to be trusted with the email address/name of the user and they don't have to reenter it So, if the user tries to go to: authentication_site/mysite_page1 they are redirected to mysite. Which would you choose, or is there a better way? The goal is to minimize the "Yet Another Password/Yet another username" problem... Thanks!!!!

  Read the article

• How can I switch an existing set of Subversion repositories to use ActiveDirectory?

  - by jpierson

  I have a set of private Subversion repositories on a Windows Server 2003 box which developers access via SVNServe over the svn:// protocol. Currently we have been using the authz and passwd files for each repository to control access however with the growing number of repositories and developers I'm considering switching to using their credentials from ActiveDirectory. We run in an all Microsoft shop and use IIS instead of Apache on all of our web servers so I would prefer to continue to use SVNServe if possible. Besides it being possible, I'm also concerned about how to migrate our repositories so that the history for the existing users map to the correct ActiveDirectory accounts. Keep in mind also that I'm not the network administrator and I'm not terrible familiar with ActiveDirectory so I'll probably have to go through some other people to get the changes made in ActiveDirectory if necessary. What are my options? UPDATE 1: It appears from the SVN documentation that by using SASL I should be able to get SVNServe to authenticate using ActiveDirectory. To clarify, the answer that I'm looking for is how to go about configuring SVNServe (if possible) to use ActiveDirectory for authentication and then how to modify an existing repository to remap existing svn users to their ActiveDirectory domain login accounts. UPDATE 2: It appears that the SASL support in SVNServe works off of a plugin model and the documentation only shows as an example. Looking at the Cyrus SASL Library it looks like a number of authentication "mechanisms" are supported but I'm not sure which one is to be used for ActiveDirectory support nor can I find any documentation about such matters. UPDATE 3: Ok, well it looks like in order to communication with ActiveDirectory I'm looking to use saslauthd instead of sasldb for the *auxprop_plugin* property. Unfortunately it appears that according to some posts (possibly outdated and inaccurate) saslauthd does not build on Windows and such endeavors are considered a work in progress. UPDATE 4: The lastest post I've found on this topic makes it sound as though the proper binaries () are available through the MIT Kerberos Library but it sounds like the author of this post on Nabble.com is still having issues getting things working. UPDATE 5: It looks like from the TortoiseSVN discussions and also this post on svn.haxx.se that even if saslgssapi.dll or whatever necessary binaries are available and configured on the Windows server that the clients will also need the same customization in order to work with these repositories. If this is true, we will only be able to get ActiveDirectory support from a windows client only if changes are made in these clients such as TortoiseSVN and CollabNet build of the client binaries to support such authentication schemes. Although thats what these posts suggest, this is contradictory from what I originally assumed from other reading in that being SASL compatible should require no changes on the client but instead only that the server be setup to handle the authentication mechanism. After reading a bit more carefully in the document about Cyrus SASL in Subversion section 5 states "1.5+ clients with Cyrus SASL support will be able to authenticate against 1.5+ servers with SASL enabled, provided at least one of the mechanisms supported by the server is also supported by the client." So clearly GSSAPI support (which I understand is required for Active Directory) must be available within the client and the server. I have to say, I'm learning way too much about the internals of how Subversion handles authentication than I ever wanted to and I juts simply want to get an answer about whether I can have Active Directory authentication support when using SVNServe on a Windows server and accessing this from Windows clients. According to the official documentation it seems that this is possible however you can see that the configuration is not trivial if even possible at all.

  Read the article

• Windows Backup fails with 0x80070002: "The system cannot find the file specified"

  - by James Johnston

  Windows 7 Backup is failing. When backing up even a single insignificant directory (e.g. I chose only the empty "Contacts" directory, leaving all other directories unchecked), I get this error within a few seconds and the backup fails. If I uncheck all files/directories, and just do the system image - then the system image is backed up OK without issue. Backup destination is an external USB hard drive. Steps to reproduce and subsequent failure: Set up backup to go to external hard drive. Don't back up system image. Back up "Contacts" directory only for my profile. Start backup. Immediately view the status of the backup, it stays on "Creating a shadow copy..." for a few seconds, and then the backup fails. Click Options button, and it says "Check your backup / The system cannot find the file specified." - with options to "Try to run backup again" or "Change backup settings". If I click "Show Details", then it says: Backup time: 4/12/2012 04:38 Backup location: My Book (D:) Error code: 0x80070002 An examination of the Event Log shows nothing useful beyond the following: Log Name: Application Source: Windows Backup Date: 4/12/2012 04:38:44 Event ID: 4104 Task Category: None Level: Error Keywords: Classic User: N/A Computer: JTJLaptop Description: The backup was not successful. The error is: The system cannot find the file specified. (0x80070002). Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Windows Backup" /> <EventID Qualifiers="0">4104</EventID> <Level>2</Level> <Task>0</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2012-04-12T04:38:44.000000000Z" /> <EventRecordID>23979</EventRecordID> <Channel>Application</Channel> <Computer>JTJLaptop</Computer> <Security /> </System> <EventData> <Data>The system cannot find the file specified. (0x80070002)</Data> <Binary>02000780E30500003F0900005B090000420ED1665C2BEE174B64529CB14610EA71000000</Binary> </EventData> </Event> What I have tried: ChkDsk on both C: (main drive) and D: (backup drive) doesn't find any errors. Running SFC /SCANNOW to run system file checker Checked the list of profiles at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList and ensured that each profile directory exists. I'm stumped; WHAT file can't be found and why is my backup failing? This is on a Lenovo T420 laptop.

  Read the article

• Useful Command-line Commands on Windows

  - by Sung Meister

  The aim for this Wiki is to promote using a command to open up commonly used applications without having to go through many mouse clicks - thus saving time on monitoring and troubleshooting Windows machines. Answer entries need to specify Application name Commands Screenshot (Optional) Shortcut to commands && - Command Chaining %SYSTEMROOT%\System32\rcimlby.exe -LaunchRA - Remote Assistance (Windows XP) appwiz.cpl - Programs and Features (Formerly Known as "Add or Remove Programs") appwiz.cpl @,2 - Turn Windows Features On and Off (Add/Remove Windows Components pane) arp - Displays and modifies the IP-to-Physical address translation tables used by address resolution protocol (ARP) at - Schedule tasks either locally or remotely without using Scheduled Tasks bootsect.exe - Updates the master boot code for hard disk partitions to switch between BOOTMGR and NTLDR cacls - Change Access Control List (ACL) permissions on a directory, its subcontents, or files calc - Calculator chkdsk - Check/Fix the disk surface for physical errors or bad sectors cipher - Displays or alters the encryption of directories [files] on NTFS partitions cleanmgr.exe - Disk Cleanup clip - Redirects output of command line tools to the Windows clipboard cls - clear the command line screen cmd /k - Run command with command extensions enabled color - Sets the default console foreground and background colors in console command.com - Default Operating System Shell compmgmt.msc - Computer Management control.exe /name Microsoft.NetworkAndSharingCenter - Network and Sharing Center control keyboard - Keyboard Properties control mouse(or main.cpl) - Mouse Properties control sysdm.cpl,@0,3 - Advanced Tab of the System Properties dialog control userpasswords2 - Opens the classic User Accounts dialog desk.cpl - opens the display properties devmgmt.msc - Device Manager diskmgmt.msc - Disk Management diskpart - Disk management from the command line dsa.msc - Opens active directory users and computers dsquery - Finds any objects in the directory according to criteria dxdiag - DirectX Diagnostic Tool eventvwr - Windows Event Log (Event Viewer) explorer . - Open explorer with the current folder selected. explorer /e, . - Open explorer, with folder tree, with current folder selected. F7 - View command history find - Searches for a text string in a file or files findstr - Find a string in a file firewall.cpl - Opens the Windows Firewall settings fsmgmt.msc - Shared Folders fsutil - Perform tasks related to FAT and NTFS file systems ftp - Transfers files to and from a computer running an FTP server service getmac - Shows the mac address(es) of your network adapter(s) gpedit.msc - Group Policy Editor gpresult - Displays the Resultant Set of Policy (RSoP) information for a target user and computer httpcfg.exe - HTTP Configuration Utility iisreset - To restart IIS InetMgr.exe - Internet Information Services (IIS) Manager 7 InetMgr6.exe - Internet Information Services (IIS) Manager 6 intl.cpl - Regional and Language Options ipconfig - Internet protocol configuration lusrmgr.msc - Local Users and Groups Administrator msconfig - System Configuration notepad - Notepad? ;) mmsys.cpl - Sound/Recording/Playback properties mode - Configure system devices more - Displays one screen of output at a time mrt - Microsoft Windows Malicious Software Removal Tool mstsc.exe - Remote Desktop Connection nbstat - displays protocol statistics and current TCP/IP connections using NBT ncpa.cpl - Network Connections netsh - Display or modify the network configuration of a computer that is currently running netstat - Network Statistics net statistics - Check computer up time net stop - Stops a running service. net use - Connects a computer to or disconnects a computer from a shared resource, or displays information about computer connections odbcad32.exe - ODBC Data Source Administrator pathping - A traceroute that collects detailed packet loss stats perfmon - Opens Reliability and Performance Monitor ping - Determine whether a remote computer is accessible over the network powercfg.cpl - Power management control panel applet quser - Display information about user sessions on a terminal server qwinsta - See disconnected remote desktop sessions reg.exe - Console Registry Tool for Windows regedit - Registry Editor rasdial - Connects to a VPN or a dialup network robocopy - Backup/Restore/Copy large amounts of files reliably rsop.msc - Resultant Set of Policy (shows the combined effect of all group policies active on the current system/login) runas - Run specific tools and programs with different permissions than the user's current logon provides sc - Manage anything you want to do with services. schtasks - Enables an administrator to create, delete, query, change, run and end scheduled tasks on a local or remote system. secpol.msc - Local Security Settings services.msc - Services control panel set - Displays, sets, or removes cmd.exe environment variables. set DIRCMD - Preset dir parameter in cmd.exe start - Starts a separate window to run a specified program or command start. - opens the current directory in the Windows Explorer. shutdown.exe - Shutdown or Reboot a local/remote machine subst.exe - Associates a path with a drive letter, including local drives systeminfo -Displays a comprehensive information about the system taskkill - terminate tasks by process id (PID) or image name tasklist.exe - List Processes on local or a remote machine taskmgr.exe - Task Manager telephon.cpl - Telephone and Modem properties timedate.cpl - Date and Time title - Change the title of the CMD window you have open tracert - Trace route wmic - Windows Management Instrumentation Command-line winver.exe - Find Windows Version wscui.cpl - Windows Security Center wuauclt.exe - Windows Update AutoUpdate Client

  Read the article

• nginx: problem configuring a proxy_pass

  - by Ofer Bar

  I'm converting a web app from apache to nginx. In apache's httpd.conf I have: ProxyPass /proxy/ http:// ProxyPassReverse /proxy/ http:// The idea is the client send this url: http://web-server-domain/proxy/login-server-addr/loginUrl.php?user=xxx&pass=yyy and the web server calls: http://login-server-addr/loginUrl.php?user=xxx&pass=yyy My nginx.conf is attached below and it is not working. At the moment it looks like it is calling the server, but returning an application error. This seems promising but any attempt to debug this failed! I can't trace any of the calls as nginx refuses to place them in the error file. Also, placing echo statement on the login server did not help either which is weird. The nginx documentation isn't very helpful about this. Any suggestion on how to configure a proxy_pass? Thanks! user nginx; worker_processes 1; #error_log /var/log/nginx/error.log; error_log /var/log/nginx/error.log notice; #error_log /var/log/nginx/error.log info; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include /etc/nginx/mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log /var/log/nginx/access.log main; sendfile on; #tcp_nopush on; #keepalive_timeout 0; keepalive_timeout 65; #gzip on; # # The default server # server { rewrite_log on; listen 80; server_name _; #charset koi8-r; #access_log logs/host.access.log main; #root /var/www/live/html; index index.php index.html index.htm; location ~ ^/proxy/(.*$) { #location /proxy/ { # rewrite ^/proxy(.*) http://$1 break; proxy_set_header X-Forwarded-Host $host; proxy_set_header X-Forwarded-Server $host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_buffering off; proxy_pass http://$1; #proxy_pass "http://173.231.134.36/messages_2.7.0/loginUser.php?userID=ofer.fly%40gmail.com&password=y4HTD93vrshMNcy2Qr5ka7ia0xcaa389f4885f59c9"; break; } location / { root /var/www/live/html; #if ( $uri ~ ^/proxy/(.*) ) { # proxy_pass http://$1; # break; #} #try_files $uri $uri/ /index.php; } error_page 404 /404.html; #location = /404.html { # root /usr/share/nginx/html; #} # redirect server error pages to the static page /50x.html # #error_page 500 502 503 504 /50x.html; #location = /50x.html { # root /usr/share/nginx/html; #} # proxy the PHP scripts to Apache listening on 127.0.0.1:80 # #location ~ \.php$ { # proxy_pass http://127.0.0.1; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # location ~ \.php$ { #root html; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; #fastcgi_param SCRIPT_FILENAME /usr/share/nginx/html$fastcgi_script_name; fastcgi_param SCRIPT_FILENAME /var/www/live/html$fastcgi_script_name; include fastcgi_params; } # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # #location ~ /\.ht { # deny all; #} } # Load config files from the /etc/nginx/conf.d directory include /etc/nginx/conf.d/*.conf; }

  Read the article

• How to load the environment variables at boot time before X11 on Ubuntu Precise?

  - by Fnux

  Using Ubuntu Precise 64 bit, I'm facing a problem that I'm unable to solve and that I'll try to describe below: I'm using a console mode program (let's say abc) that uses Go, NodeJS, Java and Scala. In order for abc to work with these languages, I've to declare the following statements: a) within /etc/environment: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin" CLASSPATH=$CLASSPATH:/usr/share/java/scala-library.jar b) within /etc/login.defs ENV_SUPATH PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin ENV_PATH PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin c) a) within /etc/sudoers: `# env_reset Defaults secure_path="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin"` Then, when I start abc from a terminal, all is fine and I can use any of the 4 languages described above. However, if I put a script within /etc/init.d that starts abc during the boot process (i.e. before to start the GUI), using Java from abc still is fine, but using Go, NodeJS or Scala doesn't work anymore. Then, I guess that during the boot process, the script within /etc/init.d that starts abc is executed before that the different environment variables set within /etc/sudoers, /etc/environment and /etc/login.defs are loaded. So, my question is: how to force the environment variables to be loaded before that my script starting abc is launched? Any help and advice on this topic would be trully appreciated. TIA. Cheers. Thanks again to Mark and Danila. Below is the current "abc" script file that I put within /etc/init.d `#! /bin/sh ### EDIT: ADD THIS VARS DEFINITIONS: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin" CLASSPATH=$CLASSPATH:/usr/share/java/scala-library.jar "ENV_SUPATH PATH"="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin" "ENV_PATH PATH"="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin" "Defaults secure_path"="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin" ##### EXPORT this VARS so they are accessible to children:" export "PATH" "CLASSPATH" "ENV_SUPATH PATH" "ENV_PATH PATH" "Defaults secure_path" `### BEGIN INIT INFO `# Provides: abc `# Required-Start: $remote_fs $syslog `# Required-Stop: $remote_fs $syslog `# Default-Start: 2 3 4 5 `# Default-Stop: 0 1 6 `# Short-Description: abc initscript `# Description: This iniscript starts and stops abc `### END INIT INFO `# Author: Fnux, fnux.fl at gmail dot com `# Version: 1.2 `# Note: (edit ABC_PATH if abc isn't installed in /opt/abc) NAME=abc ABC_PATH=/opt/abc START="-d" STOP="-k" VERSION="-v" SCRIPTNAME=/etc/init.d/$NAME STARTMESG="\nStarting abc in deamon mode." UPMESG="\n$NAME is running." DOWNMESG="\n$NAME is not running." STATUS=`pidof $NAME` `# Exit if abc is not installed [ -x "$ABC_PATH/$NAME" ] || exit 0 case "$1" in start) echo $STARTMESG cd $ABC_PATH ./$NAME $START ;; stop) cd $ABC_PATH ./$NAME $STOP ;; status) if [ "$STATUS" > 0 ] ; then echo $UPMESG else echo $DOWNMESG fi ;; restart) cd $ABC_PATH ./$NAME $STOP echo $STARTMESG ./$NAME $START ;; version) cd $ABC_PATH ./$NAME $VERSION ;; *) echo "Usage: $SCRIPTNAME {start|status|restart|stop|version}" >&2 exit 3 ;; esac : So, where and how should I write the needed environment variables for: a) Go needs the following statements (ie: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin" ENV_SUPATH PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin ENV_PATH PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin `# env_reset Defaults secure_path="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin") b) and Scala needs this one: (ie CLASSPATH=$CLASSPATH:/usr/share/java/scala-library.jar). TIA for an explanation how to do so. Cheers.

  Read the article

• Tomcat running, catalina throwing exception

  - by Mark Steudel

  So I have to preface that I'm not familiar with tomcat/catalina, but trying to troubleshoot this anyway. Anyway I see in /var/log/tomcat5/catalina.out I'm seeing these errors: Using CATALINA_BASE: /usr/share/tomcat5 Using CATALINA_HOME: /usr/share/tomcat5 Using CATALINA_TMPDIR: /usr/share/tomcat5/temp Using JRE_HOME: java.lang.ClassNotFoundException: org.apache.catalina.startup.Catalina at java.net.URLClassLoader$1.run(URLClassLoader.java:202) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:190) at java.lang.ClassLoader.loadClass(ClassLoader.java:307) at java.lang.ClassLoader.loadClass(ClassLoader.java:248) at org.apache.catalina.startup.Bootstrap.init(Bootstrap.java:223) at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:410) I'm not really sure what this means. This installation was working a week ago ... did something get corrupted? How would I figure if it did ... what other information would be valuable here? Tomcat seems to be running and starting up fine ... UPDATE: this might be related: Jun 19, 2011 11:00:25 PM org.apache.coyote.http11.Http11BaseProtocol pause INFO: Pausing Coyote HTTP/1.1 on http-9080 Jun 19, 2011 11:00:26 PM org.apache.catalina.core.StandardService stop INFO: Stopping service Catalina log4j:ERROR LogMananger.repositorySelector was null likely due to error in class reloading, using NOPLoggerRepository. Some more stuff in the logs: 2011-06-12 23:04:45,223 INFO [main] [com.atlassian.confluence.lifecycle] contextInitialized Starting Confluence 3.1.1 (build #1724) 2011-06-12 23:04:45,663 INFO [main] [beans.factory.xml.XmlBeanDefinitionReader] loadBeanDefinitions Loading XML bean definitions from c lass path resource [bootstrapContext.xml] 2011-06-12 23:04:46,134 INFO [main] [beans.factory.xml.XmlBeanDefinitionReader] loadBeanDefinitions Loading XML bean definitions from c lass path resource [setupContext.xml] 2011-06-12 23:04:46,236 INFO [main] [beans.factory.xml.XmlBeanDefinitionReader] loadBeanDefinitions Loading XML bean definitions from c lass path resource [bootstrapCacheContext.xml] 2011-06-12 23:04:47,571 INFO [main] [atlassian.plugin.manager.DefaultPluginManager] init Initialising the plugin system 2011-06-12 23:04:48,338 INFO [main] [atlassian.plugin.manager.DefaultPluginManager] init Plugin system started in 0:00:00.748 Jun 12, 2011 11:05:05 PM org.apache.catalina.startup.Catalina stopServer SEVERE: Catalina.stop: java.net.ConnectException: Connection refused at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333) at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195) at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182) at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366) at java.net.Socket.connect(Socket.java:525) at java.net.Socket.connect(Socket.java:475) at java.net.Socket.<init>(Socket.java:372) at java.net.Socket.<init>(Socket.java:186) at org.apache.catalina.startup.Catalina.stopServer(Catalina.java:395) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.apache.catalina.startup.Bootstrap.stopServer(Bootstrap.java:344) at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:435) Jun 12, 2011 11:05:44 PM org.apache.catalina.core.AprLifecycleListener lifecycleEvent INFO: The Apache Tomcat Native library which allows optimal performance in production environments was not found on the java.library.pa th: /usr/java/jdk1.6.0_18/jre/lib/i386/client:/usr/java/jdk1.6.0_18/jre/lib/i386:/usr/java/jdk1.6.0_18/jre/../lib/i386:/usr/java/packag es/lib/i386:/lib:/usr/lib CLEAN LOG OUTPUT FROM STARTING TOMCAT: Using CATALINA_BASE: /usr/share/tomcat5 Using CATALINA_HOME: /usr/share/tomcat5 Using CATALINA_TMPDIR: /usr/share/tomcat5/temp Using JRE_HOME: java.lang.ClassNotFoundException: org.apache.catalina.startup.Catalina at java.net.URLClassLoader$1.run(URLClassLoader.java:202) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:190) at java.lang.ClassLoader.loadClass(ClassLoader.java:307) at java.lang.ClassLoader.loadClass(ClassLoader.java:248) at org.apache.catalina.startup.Bootstrap.init(Bootstrap.java:223) at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:410) So I did a /etc/rc.d/init.d/tomcat status and I get this: [wqadm1n@ip-72-167-51-178 proc]$ sudo /etc/rc.d/init.d/tomcat5 status /etc/rc.d/init.d/tomcat5 is stopped [wqadm1n@ip-72-167-51-178 proc]$ sudo /etc/rc.d/init.d/tomcat5 start Starting tomcat5: [ OK ] [wqadm1n@ip-72-167-51-178 proc]$ sudo /etc/rc.d/init.d/tomcat5 status lock file found but no process running for pid 30774

  Read the article

• Varnish + Nginx + multiple IP addresses

  - by adnan

  This is my first shot at making Varnish work on my dedicated server which hosts 2 domains with 2 separate IP-addresses. My simplified setup is as follows: Nginx conf server { listen ip-address-1:8080; } server { listen ip-address-2:8080; } Varnish vcl backend default { .host = "127.0.0.1"; .port = "80"; } And in the varnish conf I have defined VARNISH_LISTEN_PORT=80 Varnish and Nginx (and php-fpm) are running properly but when I try to go to my website it shows the welcome to nginx page. The headers don't have the x-varnish in it. It seems that for some reason varnish is not listening to port 80. I'm suspecting this has to do with the vcl file where it is listening to the 127.0.0.1 host. I'm running two wordpress sites. Where should I look for to get Varnish working properly? Cheers, Adnan EDIT: Nginx seems to be in 8080 correctly but Varnish is not listening to the right ip address. Using Jens multiple varnish ip addresses netstat -lnp yields: Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 46.105.40.241:8080 0.0.0.0:* LISTEN 21610/nginx tcp 0 0 5.135.166.39:8080 0.0.0.0:* LISTEN 21610/nginx tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 21610/nginx tcp 0 0 127.0.0.1:53 0.0.0.0:* LISTEN 2544/named tcp 0 0 0.0.0.0:21 0.0.0.0:* LISTEN 1195/vsftpd tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 1184/sshd tcp 0 0 127.0.0.1:953 0.0.0.0:* LISTEN 2544/named tcp 0 0 46.105.40.241:443 0.0.0.0:* LISTEN 21610/nginx tcp 0 0 5.135.166.39:443 0.0.0.0:* LISTEN 21610/nginx tcp 0 0 127.0.0.1:6082 0.0.0.0:* LISTEN 21350/varnishd tcp 0 0 :::80 :::* LISTEN 21351/varnishd tcp 0 0 ::1:53 :::* LISTEN 2544/named tcp 0 0 :::22 :::* LISTEN 1184/sshd tcp 0 0 ::1:953 :::* LISTEN 2544/named udp 0 0 127.0.0.1:53 0.0.0.0:* 2544/named udp 0 0 ::1:53 :::* 2544/named default.vcl backend ikhebeenbril { .host = "5.135.166.39"; .port = "8080"; } backend sunculture { .host = "46.105.40.241"; .port = "8080"; } sub vcl_recv { if (server.ip == "5.135.166.39") { set req.backend = ikhebeenbril; } else { set req.backend = sunculture; } ... } sub vcl_hash { hash_data(server.ip); if (req.http.host) { hash_data(req.http.host); } hash_data(req.url); if (req.http.Accept-Encoding) { hash_data(req.http.Accept-Encoding); } return (hash); } nginx server blocks server { listen 5.135.166.39:80; listen 5.135.166.39:443 default ssl spdy; server_name www.ikhebeenbril.nl; } server { listen 46.105.40.241:80; listen 46.105.40.241:443 default ssl spdy; server_name www.thesunculture.com; }

  Read the article

• SQL Server Issue: Could not allocate space for object ... primary filegroup is full

  - by Luke

  Trying to figure out a problem at an office that has SQL Server 2005 installed on Windows SBS Server 2008. Here's the setup: It's an office, and the person who set this all up is nowhere to be found. I'm the best hope they have... One of the programs they use on a workstation gives them an error of "Could not allocate space for object 'Billing' in database "MyDatabase" because primary filegroup is full" when trying to save an entry in their software. I searched around for hours, looking for possible solutions. One was to check for available disk space, and another was to defrag. I checked the hard drives on the server, and there is plenty of space free. I also defragged, which may have helped the problem somewhat. It's hard to say, because it seems like with the nature of the error, if you try over and over you might get it to actually save. My next step was to try to see if autogrowth was enabled on the database. This would seem to be a likely / possible solution, but I can't access the database! If I run the SQL Management Studio, I can log in as my Windows user and view the list of databases. However, if I try to do anything (actually view the database, view the properties, add or edit users), I get errors that I don't have permission. For what it's worth, I also tried runing Management Studio as Administrator, in case that would help. No difference, though. Now, what I'm guessing is going on -- from my limited knowledge of SQL and from reading online -- is that though I'm logged in as a Windows administrator, that account does NOT have SQL access. I do see a list of SQL users, including SA, but I again don't have permission to add one or to change the password on an existing one. And nobody at the office has any idea what the SQL passwords could be. So... here's my thinking thus far: 1 - The "Could not allocate" error likely points to a database that needs to be allowed to autogrow. Especially since I verified there is plenty of free space and the HD has been defragmented. 2 - Enabling autogrow would be very easy to do if I had the proper access within SQL Management Stuido. That leads me to this link: http://blogs.technet.com/b/sqlman/archive/2011/06/14/tips-amp-tricks-you-have-lost-access-to-sql-server-now-what.aspx It sounds like it's a step-by-step guide for giving me the access I need to SQL. I'm guessing that if I followed this guide, I would be able to then log in to the SQL server via Management Studio with the proper permissions, and would be able to enable autogrow (or simply view the status of the existing database), and hopefully solve the "Could not allocate space" problem! So I guess I have a few questions: 1 - Would you guys agree with my "diagnosis"? Think I'm barking up the right tree? 2 - Is there any risk at all in hurting / disabling / wrecking the current SQL database or setup with me going through the guide to regain SQL access? I understand that per the guide, I would have to temporarily shut down SQL, so obviously it wouldn't be accessible during that time. But it wouldn't be worth the risk if there's a chance I could mess anything up... Like I said, the workstations ARE currently accessing the database somehow, but nobody knows with what login info or anything. Basically, it's set up, it works (usually), but if they had to reload the software, nobody would know how. Any feedback would be appreciated!! The problem is such that it's not an emergency for them, but an annoyance. If I could fix it, it would be wonderful. But if not, I think they'll manage, especially as they are going to eventually stop using this software. Thank you so much for your time! Luke

  Read the article

• Broken cups installation on a ubuntu server 64

  - by user67046

  Hi, I am having trouble with an cups installation. It seems to be in a broken state. When i try to reinstall it it stalls, the same if i try to remove it completely. I am running the server version 64 bit of Ubuntu 10.10 with kernel Linux version 2.6.35-22-server. When i try to start the cups daemon with the following command sudo service cups start It just stays there and nothing happens. I have tried to remove it, to be able to reinstall it, with the following command sudo apt-get purge cups It finally stalls with the following message Removing cups ... After that nothing happens. The process tree for the apt-get command looks like this. 1404 1404 1404 ? 00:00:00 sshd 26495 26495 26495 ? 00:00:00 sshd 26581 26495 26495 ? 00:00:00 sshd 26582 26582 26582 pts/4 00:00:00 bash 27158 27158 26582 pts/4 00:00:00 apt-get 27172 27172 27172 pts/2 00:00:00 dpkg 27176 27172 27172 pts/2 00:00:00 cups.prerm 27178 27172 27172 pts/2 00:00:00 stop I have tried to leave the process running for a while to see if i get any error messages but without success. To get out of it I have to kill the processes. sudo dpkg --configure cups dpkg: error processing cups (--configure): package cups is already installed and configured Errors were encountered while processing: cups sudo dpkg --status cups Package: cups Status: purge ok installed Priority: optional Section: net Installed-Size: 8292 Maintainer: Ubuntu Developers <[email protected]> Architecture: amd64 Version: 1.4.4-6ubuntu2.3 Replaces: cupsddk-drivers (<< 1.4.0) Provides: cupsddk-drivers Depends: libavahi-client3 (>= 0.6.16), libavahi-common3 (>= 0.6.16), libc6 (>= 2.7), libcups2 (>= 1.4.4-3~), libcupscgi1 (>= 1.4.2), libcupsdriver1 (>= 1.4.0), libcupsimage2 (>= 1.4.0), libcupsmime1 (>= 1.4.0), libcupsppdc1 (>= 1.4.0), libdbus-1-3 (>= 1.0.2), libgcc1 (>= 1:4.1.1), libgnutls26 (>= 2.7.14-0), libgssapi-krb5-2 (>= 1.8+dfsg), libijs-0.35, libkrb5-3 (>= 1.6.dfsg.2), libldap-2.4-2 (>= 2.4.7), libpam0g (>= 0.99.7.1), libpaper1, libpoppler7, libslp1, libstdc++6 (>= 4.1.1), libusb-0.1-4 (>= 2:0.1.12), zlib1g (>= 1:1.1.4), debconf (>= 1.2.9) | debconf-2.0, upstart-job, poppler-utils (>= 0.12), procps, ghostscript, lsb-base (>= 3), cups-common (>= 1.4.4), cups-client (>= 1.4.4-6ubuntu2.3), ssl-cert (>= 1.0.11), adduser, bc, ttf-freefont, cups-ppdc Recommends: foomatic-filters (>= 4.0), cups-driver-gutenprint, ghostscript-cups Suggests: cups-bsd, foomatic-db-compressed-ppds | foomatic-db, hplip, xpdf-korean | xpdf-japanese | xpdf-chinese-traditional | xpdf-chinese-simplified, cups-pdf, smbclient (>= 3.0.9), udev Breaks: foomatic-filters (<< 4.0) Conflicts: cupsddk-drivers (<< 1.4.0) Conffiles: /etc/fonts/conf.d/99pdftoopvp.conf a5221cfad70a981c80864229ef56586d /etc/logrotate.d/cups 5bb41fa9900f0d1c565954405a2bd7c4 /etc/default/cups 2b436fbb1a32b82b6aba45a76a1d7e40 /etc/pam.d/cups ff2488324854f7b1e892bb0df062d5f0 /etc/init/cups.conf 1a3cd022e8474e3d2b44640f33ce68e3 /etc/ufw/applications.d/cups 29e98a6d850da251e180c3d68dec2bd3 /etc/apparmor.d/usr.sbin.cupsd 60c4b26bfd5c033baa3dd48a3b2e9911 /etc/cups/cupsd.conf e2c7ec15835ea0939e5e86f7c6efcc03 /etc/cups/snmp.conf 2326a8af1e112676d55245bc5eb459ca /etc/cups/cupsd.conf.default a68d54d76021e857dd1d64edf57d36c5 Description: Common UNIX Printing System(tm) - server The Common UNIX Printing System (or CUPS(tm)) is a printing system and general replacement for lpd and the like. It supports the Internet Printing Protocol (IPP), and has its own filtering driver model for handling various document types. . This package provides the CUPS scheduler/daemon and related files. Original-Maintainer: Debian CUPS Maintainers <[email protected]> Would be greatful if someone could provide some help on how to solve this issue.

  Read the article

• Cloudformation with Ubuntu throwing errors

  - by Sammaye

  I have been doing some reading and have come to the understanding that if you wish to use a launchConfig with Ubuntu you will need to install the cfn-init file yourself which I have done: "Properties" : { "KeyName" : { "Ref" : "KeyName" }, "SpotPrice" : "0.05", "ImageId" : { "Fn::FindInMap" : [ "AWSRegionArch2AMI", { "Ref" : "AWS::Region" }, { "Fn::FindInMap" : [ "AWSInstanceType2Arch", { "Ref" : "InstanceType" }, "Arch" ] } ] }, "SecurityGroups" : [ { "Ref" : "InstanceSecurityGroup" } ], "InstanceType" : { "Ref" : "InstanceType" }, "UserData" : { "Fn::Base64" : { "Fn::Join" : ["", [ "#!/bin/bash\n", "apt-get -y install python-setuptools\n", "easy_install https://s3.amazonaws.com/cloudformation-examples/aws-cfn-bootstrap-1.0-6.tar.gz\n", "cfn-init ", " --stack ", { "Ref" : "AWS::StackName" }, " --resource LaunchConfig ", " --configset ALL", " --access-key ", { "Ref" : "WorkerKeys" }, " --secret-key ", {"Fn::GetAtt": ["WorkerKeys", "SecretAccessKey"]}, " --region ", { "Ref" : "AWS::Region" }, " || error_exit 'Failed to run cfn-init'\n" ]]}} But I have a problem with this setup that I cannot seem to get a decent answer to. I keep getting this error in the logs: Jun 15 12:02:34 ip-0 [CLOUDINIT] __init__.py[DEBUG]: config-scripts-per-once already ran once Jun 15 12:02:34 ip-0 [CLOUDINIT] __init__.py[DEBUG]: handling scripts-per-boot with freq=None and args=[] Jun 15 12:02:34 ip-0 [CLOUDINIT] __init__.py[DEBUG]: handling scripts-per-instance with freq=None and args=[] Jun 15 12:02:34 ip-0 [CLOUDINIT] __init__.py[DEBUG]: handling scripts-user with freq=None and args=[] Jun 15 12:02:34 ip-0 [CLOUDINIT] cc_scripts_user.py[WARNING]: failed to run-parts in /var/lib/cloud/instance/scripts Jun 15 12:02:34 ip-0 [CLOUDINIT] __init__.py[WARNING]: Traceback (most recent call last):#012 File "/usr/lib/python2.7/dist-packages/cloudinit/CloudConfig/__init__.py", line 117, in run_cc_modules#012 cc.handle(name, run_args, freq=freq)#012 File "/usr/lib/python2.7/dist-packages/cloudinit/CloudConfig/__init__.py", line 78, in handle#012 [name, self.cfg, self.cloud, cloudinit.log, args])#012 File "/usr/lib/python2.7/dist-packages/cloudinit/__init__.py", line 326, in sem_and_run#012 func(*args)#012 File "/usr/lib/python2.7/dist-packages/cloudinit/CloudConfig/cc_scripts_user.py", line 31, in handle#012 util.runparts(runparts_path)#012 File "/usr/lib/python2.7/dist-packages/cloudinit/util.py", line 223, in runparts#012 raise RuntimeError('runparts: %i failures' % failed)#012RuntimeError: runparts: 1 failures Jun 15 12:02:34 ip-0 [CLOUDINIT] __init__.py[ERROR]: config handling of scripts-user, None, [] failed Jun 15 12:02:34 ip-0 [CLOUDINIT] __init__.py[DEBUG]: handling keys-to-console with freq=None and args=[] Jun 15 12:02:34 ip-0 [CLOUDINIT] __init__.py[DEBUG]: handling phone-home with freq=None and args=[] Jun 15 12:02:34 ip-0 [CLOUDINIT] __init__.py[DEBUG]: handling final-message with freq=None and args=[] Jun 15 12:02:34 ip-0 [CLOUDINIT] cloud-init-cfg[ERROR]: errors running cloud_config [final]: ['scripts-user'] I have absolutely no idea what scripts-user means and Google is not helping much here either. I can, when I ssh into the server, see that it runs the userdata script since I can access cfn-init as a command whereas I cannot in the original AMI the instance is made from. However I have a launchConfig: "Comment" : "Install a simple PHP application", "AWS::CloudFormation::Init" : { "configSets" : { "ALL" : ["WorkerRole"] }, "WorkerRole" : { "files" : { "/etc/cron.d/worker.cron" : { "content" : "*/1 * * * * ubuntu /home/ubuntu/worker_cron.php &> /home/ubuntu/worker.log\n", "mode" : "000644", "owner" : "root", "group" : "root" }, "/home/ubuntu/worker_cron.php" : { "content" : { "Fn::Join" : ["", [ "#!/usr/bin/env php", "<?php", "define('ROOT', dirname(__FILE__));", "const AWS_KEY = \"", { "Ref" : "WorkerKeys" }, "\";", "const AWS_SECRET = \"", { "Fn::GetAtt": ["WorkerKeys", "SecretAccessKey"]}, "\";", "const QUEUE = \"", { "Ref" : "InputQueue" }, "\";", "exec('git clone x '.ROOT.'/worker');", "if(!file_exists(ROOT.'/worker/worker_despatcher.php')){", "echo 'git not downloaded right';", "exit();", "}", "echo 'git downloaded';", "include_once ROOT.'/worker/worker_despatcher.php';" ]]}, "mode" : "000755", "owner" : "ubuntu", "group" : "ubuntu" } } } } Which does not seem to run at all. I have checked for the files existance in my home directory and it's not there. I have checked for the cronjob entry and it's not there either. I cannot, after reading through the documentation, seem to see what's potentially wrong with my code. Any thoughts on why this is not working? Am I missing something blatant?

  Read the article

• Need help merging 2 AHK scripts

  - by Mikey

  i have two functioning scripts that i want to merge into a single AHK File. My problem is that when i combine both scripts, the second script doesnt function or causes an error on script 1. Either way, script 2 ist not functioning at all. Here are some facts: Script 1 = a simple menu script where i want to assign hotkeys to. Script 2 = A small launcher script from a user named Tertius in autohotkey forum. Can someone please look at both codes and help me merge this? The INI File for script 2 looks like this: Keywords.ini npff|Firefox|Firefox gm|Gmail|http://gmail.google.com ;;;;;;;;;;;; BEGIN SCRIPT 2 DetectHiddenWindows, On SetWinDelay, -1 SetKeyDelay, -1 SetBatchLines, -1 GoSub Remin SetTimer, Remin, % 1000 * 60 Loop, read, %A_ScriptDir%\keywords.ini { LineNumber = %A_Index% Loop, parse, A_LoopReadLine, | { if (A_Index == 1) abbrevs%LineNumber% := A_LoopField else if (A_Index == 2) tips%LineNumber% := A_LoopField else if (A_Index == 3) programs%LineNumber% := A_LoopField else if (A_Index == 4) params%LineNumber% := A_LoopField } tosay := abbrevs%LineNumber% } cnt = %LineNumber% Loop { Input, Key, L1 V, % "{LControl}{RControl}{LAlt}{RAlt}{LShift}{RShift}{LWin}{RWin}" . "{AppsKey}{F1}{F2}{F3}{F4}{F5}{F6}{F7}{F8}{F9}{F10}{F11}{F12}{Left}{Right}{Up}{Down}" . "{Home}{End}{PgUp}{PgDn}{Del}{Ins}{BS}{Capslock}{Numlock}{PrintScreen}{Pause}{Escape}" If( ( Asc(Key) = 65 && Asc(Key) <= 90 ) || ( Asc(Key) = 97 && Asc(Key) <= 122 ) ) Word .= Key Else { Word := "" Continue } tipup := false Loop %cnt% { if (Word == abbrevs%A_index%) { tip := tips%A_index% ToolTip %tip% tipup := true } else { if (tipup == false) ToolTip } } } $Tab:: Loop %cnt% { if (Word != "" && Word == abbrevs%A_index%) { Word := "" StringLen, len, abbrevs%A_index% Loop %len% Send {Shift Down}{Left} Send {Shift Up}{BS} ToolTip program := programs%A_index% param := params%A_index% run, %program% %param% return } } Word := "" Send {Tab} Return ~LButton:: ~MButton:: ~RButton:: ~XButton1:: ~XButton2:: Word := "" Tooltip Return Remin: WinMinimize, %A_ScriptFullPath% - AutoHotkey v WinHide, %A_ScriptFullPath% - AutoHotkey v Return ;;;;;;;;;; END SCRIPT 2 ;;;;;;;;;;;;;; BEGIN SCRIPT 1 ;This is a working script that creates a popup menu. ; Create the popup menu by adding some items to it. Menu, MyMenu, Add, FIS 201, MenuHandler Menu, MyMenu, Add ; Add a separator line. Menu, MyMenu, Color, Lime, Single ;Define the Menu Color ; Create another menu destined to become a submenu of the above menu. Menu, Submenu1, Add, Item2, MenuHandler Menu, Submenu1, Add, Item3, MenuHandler Menu, Submenu1, Color, Yellow ;Define the Menu Color ; Create another menu destined to become a submenu of the above menu. Menu, Submenu2, Add, Item1a, MenuHandler Menu, Submenu2, Add, Item2a, MenuHandler Menu, Submenu2, Add, Item3a, MenuHandler Menu, Submenu2, Add, Item4a, MenuHandler Menu, Submenu2, Add, Item5a, MenuHandler Menu, Submenu2, Add, Item6a, MenuHandler Menu, Submenu2, Color, Aqua ;Define the Menu Color ; Create a submenu in the first menu (a right-arrow indicator). When the user selects it, the second menu is displayed. Menu, MyMenu, Add, BKRS 119, :Submenu1 Menu, MyMenu, Add ; Add a separator line below the submenu. Menu, MyMenu, Add, BKRS 201, :Submenu2 Menu, MyMenu, Add ; Add a separator line below the submenu. Menu, MyMenu, Add ; Add a separator line below the submenu. Menu, MyMenu, Add, Google Search, Google ; Add another menu item beneath the submenu. return ; End of script's auto-execute section. Capslock & LButton::Menu, MyMenu, Show ; i.e. press the Win-Z hotkey to show the menu. MenuHandler: MsgBox You selected %A_ThisMenuItem% from the menu %A_ThisMenu%. return ;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;; Google Search ;;; FORMAT InputBox, OutputVar [, Title, Prompt, HIDE, Width, Height, X, Y, Font, Timeout, Default] Google: InputBox, SearchTerm, Google Search,,,350, 120 if SearchTerm < "" Run http://www.google.de/search?sclient=psy-ab&hl=de&site=&source=hp&q=%SearchTerm%&btnG=Suche return ; Make Window Transparent Space::WinSet, Transparent, 125, A ^!Space UP::WinSet, Transparent, OFF, A return ;;;;;;;;;;; END SCRIPT 1 Help is appreciated. Kind Regards, Mikey

  Read the article

• Custom fail2ban Filter for phpMyadmin bruteforce attempts

  - by Michael Robinson

  In my quest to block excessive failed phpMyAdmin login attempts with fail2ban, I've created a script that logs said failed attempts to a file: /var/log/phpmyadmin_auth.log Custom log The format of the /var/log/phpmyadmin_auth.log file is: phpMyadmin login failed with username: root; ip: 192.168.1.50; url: http://somedomain.com/phpmyadmin/index.php phpMyadmin login failed with username: ; ip: 192.168.1.50; url: http://192.168.1.48/phpmyadmin/index.php Custom filter [Definition] # Count all bans in the logfile failregex = phpMyadmin login failed with username: .*; ip: <HOST>; phpMyAdmin jail [phpmyadmin] enabled = true port = http,https filter = phpmyadmin action = sendmail-whois[name=HTTP] logpath = /var/log/phpmyadmin_auth.log maxretry = 6 The fail2ban log contains: 2012-10-04 10:52:22,756 fail2ban.server : INFO Stopping all jails 2012-10-04 10:52:23,091 fail2ban.jail : INFO Jail 'ssh-iptables' stopped 2012-10-04 10:52:23,866 fail2ban.jail : INFO Jail 'fail2ban' stopped 2012-10-04 10:52:23,994 fail2ban.jail : INFO Jail 'ssh' stopped 2012-10-04 10:52:23,994 fail2ban.server : INFO Exiting Fail2ban 2012-10-04 10:52:24,253 fail2ban.server : INFO Changed logging target to /var/log/fail2ban.log for Fail2ban v0.8.6 2012-10-04 10:52:24,253 fail2ban.jail : INFO Creating new jail 'ssh' 2012-10-04 10:52:24,253 fail2ban.jail : INFO Jail 'ssh' uses poller 2012-10-04 10:52:24,260 fail2ban.filter : INFO Added logfile = /var/log/auth.log 2012-10-04 10:52:24,260 fail2ban.filter : INFO Set maxRetry = 6 2012-10-04 10:52:24,261 fail2ban.filter : INFO Set findtime = 600 2012-10-04 10:52:24,261 fail2ban.actions: INFO Set banTime = 600 2012-10-04 10:52:24,279 fail2ban.jail : INFO Creating new jail 'ssh-iptables' 2012-10-04 10:52:24,279 fail2ban.jail : INFO Jail 'ssh-iptables' uses poller 2012-10-04 10:52:24,279 fail2ban.filter : INFO Added logfile = /var/log/auth.log 2012-10-04 10:52:24,280 fail2ban.filter : INFO Set maxRetry = 5 2012-10-04 10:52:24,280 fail2ban.filter : INFO Set findtime = 600 2012-10-04 10:52:24,280 fail2ban.actions: INFO Set banTime = 600 2012-10-04 10:52:24,287 fail2ban.jail : INFO Creating new jail 'fail2ban' 2012-10-04 10:52:24,287 fail2ban.jail : INFO Jail 'fail2ban' uses poller 2012-10-04 10:52:24,287 fail2ban.filter : INFO Added logfile = /var/log/fail2ban.log 2012-10-04 10:52:24,287 fail2ban.filter : INFO Set maxRetry = 3 2012-10-04 10:52:24,288 fail2ban.filter : INFO Set findtime = 604800 2012-10-04 10:52:24,288 fail2ban.actions: INFO Set banTime = 604800 2012-10-04 10:52:24,292 fail2ban.jail : INFO Jail 'ssh' started 2012-10-04 10:52:24,293 fail2ban.jail : INFO Jail 'ssh-iptables' started 2012-10-04 10:52:24,297 fail2ban.jail : INFO Jail 'fail2ban' started When I issue: sudo service fail2ban restart fail2ban emails me to say ssh has restarted, but I receive no such email about my phpmyadmin jail. Repeated failed logins to phpMyAdmin does not cause an email to be sent. Have I missed some critical setup? Is my filter's regular expression wrong? Update: added changes from default installation Starting with a clean fail2ban installation: cp /etc/fail2ban/jail.conf /etc/fail2ban/jail.local Change email address to my own, action to: action = %(action_mwl)s Append the following to jail.local [phpmyadmin] enabled = true port = http,https filter = phpmyadmin action = sendmail-whois[name=HTTP] logpath = /var/log/phpmyadmin_auth.log maxretry = 4 Add the following to /etc/fail2ban/filter.d/phpmyadmin.conf # phpmyadmin configuration file # # Author: Michael Robinson # [Definition] # Option: failregex # Notes.: regex to match the password failures messages in the logfile. The # host must be matched by a group named "host". The tag "<HOST>" can # be used for standard IP/hostname matching and is only an alias for # (?:::f{4,6}:)?(?P<host>\S+) # Values: TEXT # # Count all bans in the logfile failregex = phpMyadmin login failed with username: .*; ip: <HOST>; # Option: ignoreregex # Notes.: regex to ignore. If this regex matches, the line is ignored. # Values: TEXT # # Ignore our own bans, to keep our counts exact. # In your config, name your jail 'fail2ban', or change this line! ignoreregex = Restart fail2ban sudo service fail2ban restart PS: I like eggs

  Read the article

• nginx php-fpm empty site

  - by Katafalkas

  I am writing this as I was stuck trying to fix it whole night. We have recently migrated to a new server. Before migration we have been running our site on nginx + cgi (script). After migration we decided to try apache + mod_php. It was rather terrible, and I would like to migrate back to nginx, but this time I want it with php-fpm (as people say its a cool) So I did follow a number of guides and I think i done everything correctly. As well as that I have our old config files for "server" section, which i reviewed and places into new config. So I ended up having an empty site when I enter our URL. (By empty I mean blank page, no letter, errors or anything at all.) In the access log there are some weird errors like: 123.242.148.54 - - [22/Mar/2012:06:08:11 +0200] "-" 400 0 "-" "-" My guess is that php-fpm is not working, but not sure how to confirm it. Maybe some1 could give some help ? Would much appreciate. my nginx config: user nginx; worker_processes 12; error_log /var/log/nginx/error.log; #error_log /var/log/nginx/error.log notice; #error_log /var/log/nginx/error.log info; pid /var/run/nginx.pid; events { worker_connections 4096; } http { include /etc/nginx/mime.types; #default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log /var/log/nginx/access.log main; sendfile on; #tcp_nopush on; #keepalive_timeout 0; keepalive_timeout 65; tcp_nodelay on; gzip on; gzip_disable "MSIE [1-6]\.(?!.*SV1)"; fastcgi_buffer_size 256k; fastcgi_buffers 4 256k; server { listen 80; server_name www.example.com; access_log /var/log/nginx/example.access.log; error_log /var/log/nginx/error.log; root /home/www/example; index index.php; client_max_body_size 50M; #error_page 404 /404.html; # phpMyAdmin location /phpmyadmin { root /usr/share/; error_log /var/log/nginx/phpmyadmin.log; try_files $uri $uri/ /index.php; } location ~ ^/phpmyadmin/.*\.php$ { root /usr/share/; error_log /var/log/nginx/phpmyadmin.log; include /etc/nginx/fastcgi_params; fastcgi_pass 127.0.0.1:9000; } # Munin location /monitoring { root /var/www/; auth_basic "Restricted"; auth_basic_user_file /etc/nginx/conf.d/monitoring_users; error_log /var/log/nginx/monitoring.log; index index.html; } # The site location / { try_files $uri $uri/ /index.php/?$uri&$args; } # PHP interpreter location ~ \.php { include /etc/nginx/fastcgi_params; fastcgi_pass 127.0.0.1:9000; } }

  Read the article

• Replicate between mysql 5.0.xx community and enterprise edition over ssh

  - by Arlukin

  I'm trying to setup a mysql replication over an SSH tunnel. The odd thing about this setup is that I have one master with mysql 5.0.60sp1-enterprise-gpl-log and one slave with mysql 5.0.67-community-log. Could it be so that it's not possible to replicate between community and enterprise edition? As you can see in my log below, it's possible to login on the remote server with the mysql client. But the replication get "Can't connect to MySQL server on '127.0.0.1' (13)" Is it any log file I have forgotten to look in, to get more info? [root@mysql1-av ~]# mysql -uroot -p Enter password: Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 73 Server version: 5.0.67-community-log MySQL Community Edition (GPL) Type 'help;' or '\h' for help. Type '\c' to clear the buffer. The version of the slave mysql [root@mysql1-av ~]# autossh -f -M 20001 -L 3307:10.200.200.200:3306 [email protected].com -N [root@mysql1-av ~]# mysql -h127.0.0.1 --port 3307 -uroot -p Enter password: Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 5189 Server version: 5.0.60sp1-enterprise-gpl-log MySQL Enterprise Server (GPL) Type 'help;' or '\h' for help. Type '\c' to clear the buffer. mysql> Aborted Login to the master mysql with the mysql client over the ssh tunnel. [root@mysql1-av ~]# mysql -uroot -p Enter password: Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 75 Server version: 5.0.67-community-log MySQL Community Edition (GPL) Type 'help;' or '\h' for help. Type '\c' to clear the buffer. mysql> change master to master_host='127.0.0.1', MASTER_PORT=3307, master_user='xxxx', master_password='xxxx', master_log_file='bin.000001'; Query OK, 0 rows affected (0.00 sec) mysql> start slave; Query OK, 0 rows affected (0.00 sec) mysql> show slave status \G *************************** 1. row *************************** Slave_IO_State: Connecting to master Master_Host: 127.0.0.1 Master_User: replNSG Master_Port: 3307 Connect_Retry: 60 Master_Log_File: bin.000001 Read_Master_Log_Pos: 4 Relay_Log_File: relay.000001 Relay_Log_Pos: 98 Relay_Master_Log_File: bin.000001 Slave_IO_Running: No Slave_SQL_Running: Yes Replicate_Do_DB: Replicate_Ignore_DB: Replicate_Do_Table: Replicate_Ignore_Table: Replicate_Wild_Do_Table: Replicate_Wild_Ignore_Table: Last_Errno: 0 Last_Error: Skip_Counter: 0 Exec_Master_Log_Pos: 4 Relay_Log_Space: 98 Until_Condition: None Until_Log_File: Until_Log_Pos: 0 Master_SSL_Allowed: No Master_SSL_CA_File: Master_SSL_CA_Path: Master_SSL_Cert: Master_SSL_Cipher: Master_SSL_Key: Seconds_Behind_Master: NULL 1 row in set (0.00 sec) Start the replication, but it breaks on IO. [root@mysql1-av ~]# tail /var/log/mysqld.log 120921 22:17:59 [Note] Slave I/O thread killed while connecting to master 120921 22:17:59 [Note] Slave I/O thread exiting, read up to log 'bin.000001', position 4 120921 22:17:59 [Note] Error reading relay log event: slave SQL thread was killed 120921 22:29:36 [Note] Slave SQL thread initialized, starting replication in log 'bin.000001' at position 4, relay log '/var/lib/mysql/relay.000001' position: 4 120921 22:29:36 [ERROR] Slave I/O thread: error connecting to master '[email protected]:3307': Error: 'Can't connect to MySQL server on '127.0.0.1' (13)' errno: 2003 retry-time: 60 retries: 86400 Because it can't connect to the master server.

  Read the article

< Previous Page | 2169 2170 2171 2172 2173 2174 2175 2176 2177 2178 2179 2180  | Next Page >