Search Results

Search found 17771 results on 711 pages for 'dhcp option'.

Page 218/711 | < Previous Page | 214 215 216 217 218 219 220 221 222 223 224 225  | Next Page >

• Configuration for a two machine ESXi cluster using VSA to present local storage to VMs

  - by MDMarra

  I'm designing a little vSphere 5 cluster for one of our remote sites. We have some IBM x3650s that have 6x 300GB 10K RPM drives in them, along with dual quad core CPUs and 24GB RAM. Because we use HP P4500 G2s at our primary site, we have licenses available for HP P4000 VSAs. I thought that this would be the perfect opportunity to use them. Below is a basic drawing of what I want to accomplish: I want to run a P4000 VSA on each server and run them in a Network RAID-10 (Lefthand speak for network mirroring, think of it as RAID 1 across nodes or as an active/active storage cluster). I will then present this storage to guests that will run on this mini-cluster. It will be managed by a vCenter Server on our main site. All connections will be GbE with two dedicated to storage. Management and Data will share a pair of connections, since I don't expect there to be high load. These servers are just there to provide directory services, dhcp, printing, etc. Does anyone see anything potentially wrong with this approach? Is this the best way to do this without adding additional dedicated storage heads? Are there any pitfalls in this design, besides the lack of dedicated Data/Mgmt interfaces?

  Read the article

• Vista ICS issue

  - by Bill Grey

  I have a strange problem with Internet Connection Sharing on a laptop running Vista Business. This laptop is connected to the internet via the ethernet port, which goes to an ADSL modem. it is automatically assigned the IP address 192.168.1.50, and the modem/gateway is 192.168.1.1 My friends laptop is running Vista Home. Previously, I would create an ad hoc wireless network, enable ICS, and everything would be perfect. My friend would have internet access via this. However, something has now mysteriously broken. If I enable ICS on the wireless connection, it resets my Local Area Connection, assigning it the manual IP address of 192.168.0.1, which means my connection to the internet is destroyed. Both wireless adapters on each network are assigned auto configuration addresses, in the 168. range. They can see each other fine, but my friends laptop cannot access the internet via mine, even after I have restored the Local Area Connection settings. I understand the computer with ICS enabled must have the IP of 192.168.0.1, but previously, before whatever went wrong, my wireless adapter would be 192.168.0.1 and my friends computer would get an IP via DHCP. I have also tried setting static IP address and making a bridge, none of which works. How can I fix this problem, and prevent enabling ICS from touching my Local Area Connection? Both machines have no firewall, have appropriate settings etc...

  Read the article

• OpenVPN via DD-WRT

  - by user140491

  I am using DD-WRT with my Buffalo G300NH. I notice in my log files: Wed Oct 10 01:08:25 2012 us=343000 Cannot open /tmp/openvpn/dh.pem for DH parameters: error:02001003:system library:fopen:No such process: error:2006D080:BIO routines:BIO_new_file:no such file I have looked at other answers regarding this error. I have tried to no avail. 755 are chmod rights to /tmp/openvpn. At this point, I can not connect outside my LAN via OpenVPN. My server config looks like this: #mode server #tls-server push "route 192.168.11.1 255.255.255.0" push "dhcp-option DNS 10.8.0.1" server 10.8.0.0 255.255.255.0 port 1194 proto udp dev tun0 ifconfig 10.8.0.1 10.8.0.2 #secret /tmp/static.key ca /tmp/openvpn/ca.crt cert /tmp/openvpn/cert.pem key /tmp/openvpn/key.pem dh /tmp/openvpn/dh.pem keepalive 10 120 comp-lzo persist-key persist-tun verb 5 management localhost 5001 Can someone, knowledgeable, of this error kindly help? i have been going on several days, trying to sort it out. I like all nighters though!!

  Read the article

• Wifi network undetectable on a Lenovo G470

  - by Rex

  I have a WPA2 secured network with a visible SSID at home that works perfectly fine with a Dell laptop,a HP netbook and sundry mobile phones. When I try connecting my sister's Lenovo G470, it refuses to detect the wifi network no matter what, but shows up the neighbors' networks. The Lenovo also works correctly at her office. Both laptops run Windows 7. Already tried/checked the following: Manually configure wifi network settings (copied over from the Dell) Ensure there is no MAC address filtering on the router. Ensure router DHCP server is not running out of addresses to assign (I have set it to allocate upto 10). Reboot laptop, router etc. Is this a known problem, and is there anything else one could try? Update - The problematic Lenovo uses Windows 7 Home Basic while the Dell that works uses Home Premium and the HP netbook uses Starter edition - if that makes any difference. Further update - It is able to connect if I reboot into safe mode with networking. However in 'normal' mode it shows up the network sporadically, and then says there was an error connecting to it. All the network parameters, password, encryption, etc etc are EXACTLY the same as they are on the Dell.

  Read the article

• Windows 2003 DNS or IIS6 Problem?

  - by Mario

  Weird DNS problem... We have an intranet located internally on a windows 2003 / iis6 server - DNS handled internally on another windows 2003 server. The intranet, amongst other functions, hosts a ecommerce store I wrote that sells nike apparel embroidered with our company logo. Up until recently, it would send an email to payroll and the cost would be deducted from the employees paycheck. lets say this store is located at http://mydomain.com (only available internally) Now, we've been told by the accountants that we can no longer auto deduct from payroll and the employee needs to pay with a credit card or cash. So i went to thawte.com and ordered an SSL cert to be on the safe side (even though the CC gateway is secure) and they told me i need to drop the .com from the domain name Not wanting to mess with a system thats perfectly functional, i created another DNS entry that just points to mydomain (no .com) and left the old one in there. so they would go to http://mydomain On my Mac (OS X 10.6) i can hit either one just fine On Windows XP / Windows XP Embedded or Windows 7 (the vast majority of the pc's on our network) http://mydomain - returns nothing http://mydomain.com still works https://mydomain.com works but says the cert is invalid (as it should, it was issued to mydomain - not mydomain.com) my question is: why does it work on my Mac and not on a Windows PC (i get dhcp and dns just like any other pc on the network) and will removing the .com one from the DNS server resolve this? I've done all the usual attempts - ipconfig /flushdns, ipconfig /renew and release even going so far as to stop and restart DNS client on my Windows 7 box; rebooting and shutting down - adding a regedit entry something along the lines of SecureResponses and rebooting nothing works... I think its the .com and the not conflicting in DNS but i'm not sure - and why not on OS X We're closed on sunday and i'm going to remote in and see what happens if i remove the .com from DNS but any other ideas? -Mario

  Read the article

• Good DB Migrations for CakePHP?

  - by Martin Westin

  Hi, I have been trying a few migration scripts for CakePHP but I ran into problems with all of the in some form or another. Please advice me on a migration option for Cake that you use live and know works. I'd like the following "features": -Support CakePHP 1.2(e.g. CakeDCs migrations will only be an option when 1.3 is stable and my app migrated to the new codebase) -Support for (or at least not halt on) Models with a different database config. -Support Models in sub-folders of app/models -Support Models in plugins -Support tables that do not conform to Cake conventions (I have a few special tables that do not have a single primary key field and need to keep them) -Plays well with automated deployment via Capistrano and Git. I do not need rails-style versioned files a git versioned schema file that is compared live to the existing schema will do. That is: I like the SchemaShell in Cake apart from it not being compatible with most of my requirements above. I have looked at and tested: CakePHP Schema Shell http://book.cakephp.org/view/734/Schema-management-and-migrations CakeDC migrations http://cakedc.com/downloads/view/cakephp_migrations_plugin YAML migrations http://github.com/georgious/cakephp-yaml-migrations-and-fixtures joelmoss migrations http://code.google.com/p/cakephp-migrations

  Read the article

• File extensions and MIME Types in .NET

  - by Marc Climent

  I want to get a MIME Content-Type from a given extension (preferably without accessing the physical file). I have seen some questions about this and the methods described to perform this can be resumed in: Use registry information. Use urlmon.dll's FindMimeFromData. Use IIS information. Roll your own MIME mapping function. Based on this table, for example. I've been using no.1 for some time but I realized that the information provided by the registry is not consistent and depends on the software installed on the machine. Some extensions, like .zip don't use to have a Content-Type specified. Solution no.2 forces me to have the file on disk in order to read the first bytes, which is something slow but may get good results. The third method is based on Directory Services and all that stuff, which is something I don't like much because I have to add COM references and I'm not sure it's consistent between IIS6 and IIS7. Also, I don't know the performance of this method. Finally, I didn't want to use my own table but at the end seems the best option if I want a decent performance and consistency of the results between platforms (even Mono). Do you think there's a better option than using my own table or one of other described methods are better? What's your experience?

  Read the article

• Issues resolving DNS entries for multi-homed servers

  - by I.T. Support

  This is difficult to explain, so bear with me. We have 2 domain controllers, each multi-homed to straddle 2 internal subnets, (subnet A and subnet B) and provide dns, dhcp, and ldap authentication. Both domain controllers each have 2 DNS entries. both entries have identical host names, but correspond to subnet A & subnet B respectively (example entries shown): dc1 host 192.168.8.1 dc1 host 192.168.9.1 dc2 host 192.168.8.2 dc2 host 192.168.9.2 We also have a 3rd subnet for our dmz, (subnet C) which neither domain controller has an IP address on, but our firewall/routing tables provide access to subnet A from subnet C and vice versa, but don't allow access to subnet B from subnet C. Here's my issue. How can I force/determine which dns entry is used when a server on subnet C queries either domain controller by host name? Right now it seems to randomly pick one of the two entries, swaps out the name for the IP address and that's that. The problem is if it randomly selects the entry that corresponds to the 9.x subnet B (no access from subnet C), then the server fails to resolve. If it picks the entry for the 8.x subnet A then it resolves (firewall/routing tables defined for communication between these 2 subnets) Here's what I'd like to know: What are Best Practices (if any) for dealing with DNS resolution on subnets that the DNS servers don't have a presence on? Can I control something akin to a metric value to force an order of DNS resolution when there are multiple entries for the same host name that correspond to different IP subnets? Should I even have 2 DNS HOST entries for the same name? Here's what I'd like to avoid: Making edits to the HOSTS files of servers on subnet C to force DNS resolution of the hostname to the appropriate subnet Adding NIC's to the DC's to have them straddle the DMZ as well, thus obtaining a third DNS entry that corresponds to subnet C Again, my apologies if this was too verbose / unclear. Thanks!

  Read the article

• Any way to avoid creating a huge C# COM interface wrapper when only a few methods needed?

  - by Paul Accisano

  Greetings all, I’m working on a C# program that requires being able to get the index of the hot item in Windows 7 Explorer’s new ItemsView control. Fortunately, Microsoft has provided a way to do this through UI Automation, by querying custom properties of the control. Unfortunately, the System.Windows.Automation namespace inexplicably does not seem to provide a way to query custom properties! This leaves me with the undesirable position of having to completely ditch the C# Automation namespace and use only the unmanaged COM version. One way to do it would be to put all the Automation code in a separate C++/CLI module and call it from my C# application. However, I would like to avoid this option if possible, as it adds more files to my project, and I’d have to worry about 32/64-bit problems and such. The other option is to make use of the ComImport attribute to declare the relevant interfaces and do everything through COM-interop. This is what I would like to do. However, the relevant interfaces, such as IUIAutomation and IUIAutomationElement, are FREAKING HUGE. They have hundreds of methods in total, and reference tons and tons of interfaces (which I assume I would have to also declare), almost all of which I will never ever use. I don’t think the UI Automation interfaces are declared in any Type Library either, so I can’t use TLBIMP. Is there any way I can avoid having to manually translate a bajillion method signatures into C# and instead only declare the ten or so methods I actually need? I see that C# 4.0 added a new “dynamic” type that is supposed to ease COM interop; is that at all relevant to my problem? Thanks

  Read the article

• Using VLANs/subnetting to separate management from services?

  - by YouAreTheHat

  Background: I recently purchased a server and a managed switch for my home in the hopes of getting more experience and some fun toys to play with. The devices and appliances I either have or plan to have cover a broad spectrum: router, DD-WRT AP, Dell switch, OpenLDAP server, FreeRADIUS server, OpenVPN gateway, home PCs, gaming consoles, etc. I intend to segment my network with VLANs and associated subnets (e.g., VID10 is populated by devices on 192.168.10.0/24). The idea is to secure the more sensitive appliances by forcing traffic through my router/FW. Setup: After thinking and planning for some time, I have tentatively decided on 4 VLANs: one for the WAN connection, one for servers, one for home/personal devices, and one for management. In theory, the home VLAN will have limited access to the servers, and the management VLAN will be totally isolated for security. Question: Since I want to restrict access to management interfaces, but some appliances have to be accessible to other devices, is it possible/wise to have only management (SSH, HTTP, RDP) available on one VLAN/IP and only services (LDAP, DHCP, RADIUS, VPN) available on other? Is this a thing that is done? Does it gain me the security I think it does, or hurt me in some way?

  Read the article

• Vmware Player 3.0 - cannot ping 32 bits guest from 64 bits (guest or host)

  - by npmj

  I'm stuck with what seems a bug in VmWare Player (build 203739). I'm using W7 Ultimate 64bits as host and have a CentOS 5.4 (64 bits) as a guest and a Windows XP Professional SP3 (32 bits) as another guest. From the 64 bits machines (the host and the linux guest) I cannot ping the windows XP. Off course, I already turned off the windows firewall in the guest and also in the host. The network is pretty basic, I'm using Vmnet8 (NAT), with DHCP and port forwarding (to the windows XP's IP). Everything is working ok, I have internet access from host and from both guests. Port forwarding to the XP guest is working ok too. The only problem is that I cannot access the XP guest through the Vmnet8. I monitored the traffic using wireshark (in the host and in the windows guest). If I try to ping the XP guest from the host, what I see is the ARP request leaving the host, being answered by the guest and, after that, there is no echo request leaving the host. The same occurs if I try to ping the XP from the CentOs guest. From the windows XP guest I can ping both the host and the CentOs guest. From the XP guest I can access the host shares. Obviously, from the host I cannot see the XP shares (as I cannot even ping the guest). I want to maintain this setup (using NAT to share the host's internet connection). Any suggestions?

  Read the article

• How can parallelism affect number of results?

  - by spender

  I have a fairly complex query that looks something like this: create table Items(SomeOtherTableID int,SomeField int) create table SomeOtherTable(Id int,GroupID int) with cte1 as ( select SomeOtherTableID,COUNT(*) SubItemCount from Items t where t.SomeField is not null group by SomeOtherTableID ),cte2 as ( select tc.SomeOtherTableID,ROW_NUMBER() over (partition by a.GroupID order by tc.SubItemCount desc) SubItemRank from Items t inner join SomeOtherTable a on a.Id=t.SomeOtherTableID inner join cte1 tc on tc.SomeOtherTableID=t.SomeOtherTableID where t.SomeField is not null ),cte3 as ( select SomeOtherTableID from cte2 where SubItemRank=1 ) select * from cte3 t1 inner join cte3 t2 on t1.SomeOtherTableID<t2.SomeOtherTableID option (maxdop 1) The query is such that cte3 is filled with 6222 distinct results. In the final select, I am performing a cross join on cte3 with itself, (so that I can compare every value in the table with every other value in the table at a later point). Notice the final line : option (maxdop 1) Apparently, this switches off parallelism. So, with 6222 results rows in cte3, I would expect (6222*6221)/2, or 19353531 results in the subsequent cross joining select, and with the final maxdop line in place, that is indeed the case. However, when I remove the maxdop line, the number of results jumps to 19380454. I have 4 cores on my dev box. WTF? Can anyone explain why this is? Do I need to reconsider previous queries that cross join in this way?

  Read the article

• Mac Management and Security

  - by Bart Silverstrim

  I was going through some literature on managing OS X laptops and asked someone some questions about usage scenarios when using the MacBooks. I asked someone more knowledgeable than I about whether it was possible for my Mac to be taken over if I were visiting another site for a conference or if I went on a wifi network at a local coffee house with policies from an OS X Server with workgroup manager (either legit for the site or someone running a version of OS X Server on hardware they have hidden somewhere on the network), which apparently could be set up to do things like limit my access to Finder or impose other neat whiz-bang management features. He said that it is indeed possible for it to happen as it would be assigned via the DHCP server and the OS X server would assume my Mac is a guest and could hand out restrictions and apparently my Mac will happily accept them without notifying me or giving me an option, unlike Windows which I believe would need to be joined to a domain before it becomes "managed" by Active Directory. So my question is as network admins and sysadmins with users traveling with MacBooks, is there a way to reasonably protect your users from having their machines hijacked without resorting to just turning off networking all the time? Or isn't this much of a security hazard? What threat does this pose to the road warriors in your businesses?

  Read the article

• Inter-vlan routing issues

  - by DKNUCKLES

  I've been brought in to help administer a network and I've run into an issue - I'm not sure why this one is beyond me, however I figure an extra set of eyes on the problem may help resolve the issue. I have an HP MSM720 controller and at the time I'm trying to set up a basic hotspot set up with access points. For the time being I'm just looking to have people authenticate with a PSK and access the internet and other resources (namely printers) on other vlans. The user authenticates and the DHCP server on the controller gives them a 192.168.1.0/24 address. They are able to successfully browse the internet and ping machines on other networks, however they are unable to print to network printers that sit on the same LANs as the very computers that wireless clients can ping. The (extremely simplified) topology is as follows Computers on the wireless 192.168.1.1 network are able to ping computers on the 192.168.0.0 network, however cannot ping or print to the printers on the same network. I'm baffled and I have no idea why this is the case. Can anyone shed some light on this for me? Can someone spot the error of my configuration? EDIT : It should be noted that for whatever reason other computers on the 10.0.100.0/24 network cannot even ping the gateway of the Wireless Access network (192.168.1.1) - I'm not sure if this is relevant. These are the VLANS listed on the controller.

  Read the article

• EFI pxe network boot error

  - by Lee

  Asking this on both [serverfault][1] and [superuser][2]. When attempting to network boot RHEL 5.4 on an old ia64 machine I get the following error : ![alt text][3] So I've basically followed the tutorial here : [http://www-uxsup.csx.cam.ac.uk/pub/doc/suse/sles9/adminguide-sles9/ch04s03.html][4] DHCPD,TFTPD etc are already setup and working with standard x86 PXE clients. I've unpacked the boot.img file into /tftpboot/ia64/ and passed the path to the elilo.efi file via DHCP with the filename ""; option. Changing this filename generates a PXE file not found error (see below). So I assume that PXE has found the file... ![alt text][5] The only thing wrong I can find in the logs is : Jan 6 19:49:31 dhcphost in.tftpd[31379]: tftp: client does not accept options Any ideas? I'm sure I hit a problem like this a few years ago but I can't remember the fix :) Thanks in advance! Thanks in advance! [1]: http:// serverfault.com/questions/100188/ efi-pxe-network-boot-error [2]: http:// superuser.com/questions/92295/ efi-pxe-network-boot-error [3]: http:// i.imgur.com/Zx1Jy. png [4]: http:// www-uxsup.csx.cam.ac.uk/pub/doc/suse/sles9/adminguide-sles9/ch04s03.html [5]: http:// i.imgur.com/CEzGf. jpg

  Read the article

• split video (avi/h264) on keyframe

  - by m.sr

  Hallo. I have a big video file. ffmpeg, tcprobe and other tool say, it is an h264-stream in an AVI-container. Now i'd like to cut out small chunks form the video. Problem: The index of the video seam corrupted/destroyed. I kind of fixed this via mplayer -forceidx -saveidx <IndexFile> <BigVideoFile>. The Problem here is, that I'm now stuck with mplayer/mencoder which can use this index file via -loadidx <IndexFile>. I have tried correcting the index like described in man aviindex (mplayer -frames 0 -saveidx mpidx broken.avi ; aviindex -i mpidx -o tcindex ; avimerge -x tcindex -i broken.avi -o fixed.avi), but this didn't fix my video - meaning that most tools i've tested couldn't search in the video file. Problem: I sut out parts of the video via following command: mencoder -loadidx in.idx -ss 8578 -endpos 20 -oac faac -ovc x264 -sws 9 -lavfopts format=mp4 -x264encopts <LotsOfOpts> -of lavf -vf scale=800:-10,harddup in.avi -o out.mp4. Now here the problem is, that some videos are corrupted at the beginning. I think this is because the fact, that i do not necessarily cut at keyframe. Questions: What is the best way to fix the index of an avi "inline" so that every tool can again work as expected with it? How can i split at the keyframes? Is there an mencoder-option for this? Are Keyframes coming in a frequency? How to find out this frequency? (So with a bit of math it should be possible to calculate the next keyframe and cut there) Is ther perhaps some completely other way to split this movie? Doing it by hand is no option, i've to cut out 1000+ chunks ... Thanks a lot!

  Read the article

• jQuery UI Datepicker and Google Chrome not working

  - by zA

  Hi, I'm having some problems with jQueryUI Datepicker and Google Chrome. My datepicker is working as expected with IE8, Firefox and Safari. The problem is when clicking the datepicker connected textbox in Chrome. It gives me a crash page, "Oops, an error occurred...". On my page there's textbox with a datepicker. The datepicker is language dependent and it loads the correct language settings dynamically. The datepicker should also display the month and year dropdowns. The code is as follows $(function() {$.datepicker.setDefaults($.extend({ changeMonth: true, changeYear: true }, $.datepicker.regional['']));$('#<%= TextBoxBirthDate.ClientID %').datepicker($.datepicker.regional[$('#LabelRegionalSettings').val()]);}); If I only extend the datepicker with one option, i.e. changeYear, it works in Chrome. But if I add another option, i.e. changeMonth, the 'crash' in Chrome occurs. Is my code incorrect? If so, how do I fix it? Any help is greatly appreciated!

  Read the article

• client flips between internal and external IP addresses??

  - by jmiller-miramontes

  I have what seems like a not-particularly-complicated home network, all things considered: a DSL line comes in to a modem/router, which goes off to a switch, which supports a bunch of machines. My machines live in a 192.168.0.x address space; however, I'm running some public servers on the network, so I have a block of 8 (5, really) static IP addresses that are mapped to the servers by the router. The non-servers get 192.168.0.x addresses via NAT; some machines have static addresses and some get addresses from DHCP. Locally, I'm running a DNS server (named) to map between the domain names and the 192.168 address space. Somewhat messy, but everything basically works. Except: One of my local non-server clients occasionally switches from its internal address to its external address. That is, if I check the logs of a website I'm running internally, the hits coming from this client sometimes show up with the internal 192.168 address, and sometimes with the external (216.103...) address. It will flip back and forth for no apparent reason, without my doing anything. This can be a problem in terms of how the clients interact with the way I have some of the clients' SSH systems configured (e.g., allowing access from the internal network but not the external network), but it also Just Seems Wrong. I will confess that I'm kinda skating on the very edge of my networking competence here, but I can't for the life of me figure out what's going on. If it helps, the client in question is running Mac OS X / 10.6; its address is statically assigned, is not one of the five externally-accessible addresses, and gets its DNS from (first) the internal DNS server and (second) my ISP's DNS servers. I can't swear that none of the other NAT clients are also showing this problem; the one I'm dealing with is my everyday machine, so this is where I run into it. Does anybody out there have any advice? This is driving me crazy...

  Read the article

• How to configure a Router (TL-WR1043ND) to work in WDS mode?

  - by LanceBaynes

  I have a WRT160NL router (192.168.1.0/24 - OpenWrt 10.04) as AP. It's: - WAN port: connected to the ISP - WLAN: working as an AP, using 64 bit WEP/SSID: "MYWORKINGSSID", channel 5, using password: "MYPASSWORDHERE" - It's IP Address is: 192.168.1.1 Ok! It's working great! But: I have a TL-WR1043ND router that I want to configure as a "WDS". (My purpose is to extend the wireless range of the original WRT160NL.) Here is how I configure the TL-WR1043ND: 1) I enable WDS bridging. 2) In the "Survey" I select my already working network. 3) I set up the encryption (exact same like the already working one) 4) I choose channel 5 5) I type the SSID 6) I disable the DHCP server on it. After I reboot the router and connect to this router (TL-WR1043ND) over wireless I'm trying to ping google.com. From the ping I see that I can reach this router, that's ok, but it seems like that this router can't connect to the original one, the WRT160NL (so I don't get ping reply from Google). The encryption settings/password is good I checked it many-many-many times. what could be the problem? I'm thinking it could be a routing problem, but what should I add to the "Static Routing" menu? I tried to change the IP address of the TL-WR1043ND to: 192.168.1.2 So if this a routing issue then I should add a static routing rule that says: If destination: any then forward the packet to 192.168.1.1 p.s.: I updated the Firmware to the latest version. It's still the same. p.s.2: The HW version of the TL-WR1043ND is 1.8 p.s.3: Could that be the problem that I use different routers? (If I would buy.. another TL-WR1043ND and use it instead of the WRT160NL, and with normal Firmware, not OpenWrt, then it would work?? The "WDS" is different on different routers?) p.s.4: I will try to check the router logs@night - and paste it here! :\

  Read the article

• How can I add a wireless router to a wired router?

  - by Tester101

  The Setup: wired D-link (EBR-2310) router connected to my cable modem. Wireless NetGear N300 (WNR2000v3) router connected to a LAN port on the wired router. What I'm trying to do: I'm trying to setup the wireless router to be a separate network, that only accesses the internet through the wired router. What I've done so far. I setup the wireless router's WAN port to get an address from ISP (which should be coming from my wired router running DHCP), and the LAN as a subnet (192.168.1). Wired router's LAN is 192.168.0. The problem: I'm not able to connect to the internet from the wireless router. At one point my wired router showed that it was handing out an IP to the wireless router, but that is not happening anymore. The question: Is what I'm trying to do possible? Am I not thinking about this properly? Do I need to buy a better wired router, with 2 WAN ports? How can I configure these routers to work together?

  Read the article

• SQL Server 2008 cluster freezing

  - by Ed Leighton-Dick

  We have run into a strange situation in which a SQL Server 2008 single-node cluster hangs. As background, we are rebuilding a Windows Server 2003/SQL Server 2005 two-node cluster using Windows 2008 and SQL Server 2008. Here's the timeline: Evicted the passive node (server B) from the Windows 2003/SQL 2005 cluster. The active node now functions as a single-node cluster with no problems. Wiped server B's disks and installed Windows 2008 and SQL Server 2008 as a single-node cluster. Since we do not want to the two clusters to communicate yet, we left the cluster's private network "heartbeat" adapter unconfigured. The cluster comes up and functions normally. Moved all databases to the new cluster. Cluster continues to function normally. Turned off server A (old cluster) in preparation for rebuilding as the second node of the new cluster. SQL Server instance on server B (new cluster) locks up, even though it should have no knowledge of or interaction with server A. Restarted server A. SQL Server instance on server B (new cluster) immediately begins working again. Things we have tried: The new cluster's name responds to ping and NETBIOS requests, even while the SQL Server is hung. We have confirmed that no IP address is assigned to the old heartbeat adapter, and it is not pulling an IP address from DHCP. Disabling the heartbeat's network card has the same effect. No errors were generated in any logs - Windows or SQL. When the error first occurred, it sat in the hung state for quite some time (well over 10 minutes) before anyone figured out what was going on. This would seem to eliminate any sort of normal cluster timeout in which it would have been searching for the other node (even if one had been configured). Server B is running Windows 2008 SP2, fully patched, and SQL Server 2008 SP1 CU7 (10.0.2775).

  Read the article

• Simple list based output instead of style and javascript ridden ASP.net webforms menu

  - by Mike

  Hi All, Is there a way (or component i could use) to output a simple menu. I just need it output as a list, like you would use for a simple superfish menu. I've looked at the menu control and cssadapters (css friendly) which kind of works, except there is a lot of styles and javascript output with the menu which is destroying the look. If I can't find something that outputs a clean list, my next option is to craft some jquery to delete these styles. This is not my preferred option. If you have a better idea, please let me know. Just something that looks like this: <ul> Main Menu <li> hi </li> <li> second menu <ul> <li> <a href="hi.aspx"> in second menu </a></li> <li> <a href="rabbits.aspx"> hi there </a></li> </ul> </li> </ul> Thanks.

  Read the article

• Weird routing issue

  - by Joel Coel

  I'm having some weird internet problems on campus. I know it's something simple, but it's a case where I need another set of eyes. I think I can explain the problem best by posting a tracert: Tracing route to google.com [74.125.45.147] over a maximum of 30 hops: 1 3 ms 3 ms 3 ms 192.168.8.1 2 1 ms 1 ms 1 ms elissaemily-pc.york.edu [192.168.10.5] 3 2 ms 2 ms 2 ms rrcs-76-79-19-33.west.biz.rr.com [76.79.19.33] 4 31 ms 3 ms 2 ms ge-1-1-0.lnclne00-mx41.neb.rr.com [76.85.220.109] 5 20 ms 17 ms 17 ms ge-7-3-0.chcgill3-rtr1.kc.rr.com [76.85.220.137] 6 20 ms 20 ms 19 ms ae-5-0.cr0.chi30.tbone.rr.com [66.109.6.112] 7 19 ms 19 ms 24 ms ae-1-0.pr0.chi10.tbone.rr.com [66.109.6.155] 8 26 ms 24 ms 24 ms 74.125.48.109 9 23 ms 24 ms 21 ms 216.239.46.246 10 39 ms 39 ms 55 ms 209.85.242.215 11 39 ms 39 ms 39 ms 209.85.254.243 12 39 ms 40 ms 96 ms 209.85.253.145 13 39 ms 39 ms 39 ms yx-in-f147.1e100.net [74.125.45.147] Trace complete. Note the second entry in there. Not only is the host name a student's computer, but the ip address doesn't exist. Dhcp shows that host as having a different address and you can't ping any 192.168.10.5. Yet somehow it's routing packets for us (and not very well, either — things are slow right now). The basic network routing table looks like this: Destination Subnet Mask Gateway --------------------------------------- Default Route -- 10.1.1.5 (our firewall) 10.0.0.0 255.0.0.0 -- 192.168.8.0 255.255.252.0 --

  Read the article

• Is there an extension or a way to write an extension for firefox that allows a developer to refresh

  - by Kevin J

  I'm a developer, and I spend much of my day refreshing the webapps I work on. Occasionally, I'll encounter pages where POST data was submitted, and firefox will prompt me to Resend POST data or to Cancel. Now, I know that I can just redirect a page to itself to get rid of this warning, but I still want to keep this warning for our users; I just want to be able to skip it while developing. It's also not just on one page, but at many different points throughout the app, so it's not like I can just do if $debug==true then redirect or something like that. Basically just a minor convenience issue, but when I encounter the message 50-100 times a day, it can get aggravating. What I want to do is essentially have 3 options when refreshing: Resend POST data, cancel, or refresh without resending POST data The third option would be equivalent to clicking "enter" in the address bar (which is what I end up having to do). The problem with clicking enter is that I often have to "hard refresh" using ctrl+shift+r, but if I do this with POST data I have to click cancel, then click enter on the address bar, then do a hard refresh after that. I would instead like to press ctrl+shift+r, then continue hard refreshing the page without the POST data. Does anyone know how to do this? Through an extension or otherwise? It's totally a minor issue, but it's something that constantly bothers me and I actually think it would be quite a useful option. Thanks

  Read the article

• DNS configuration issues. Clients inside network unable to resolve DNS server's name

  - by hydroparadise

  Setup the DNS service on Ubuntu 12.04 64 and all apears to be well except that my dhcp clients do not recognize my DNS servers hostname. When doing a nslookup on one of my Windows clients, I get C:\Users\chad>nslookup Default Server: UnKnown Address: 192.168.1.2 Where I would expect the FQDN in the spot where UnKnown is seen. The DNS server know's itself pretty well, but I think only because I have an entry in the /etc/hosts file to resolve. There's so many places to look I don't even know where to begin. Are there any logs I can look at? Something. Places I've looked at and configured: /etc/bind/zones/domain.com.db /etc/bind/zones/rev.1.168.192.in-addr.arpa /etc/bind/named.conf.local EDIT: '/etc/bind/zones/rev.1.168.192.in-addr.arpa' @ IN SOA dns-serv1.mydomain.com [email protected]. ( 2006081401; 28800; 604800; 604800; 86400 ) IN NS dns-serv1.mydomain.com. 2 IN PTR dns-serv1 2 IN PTR mydomain.com EDIT 2: '/etc/bind/named.conf.local' zone "mydomain.com" { type master; file "/etc/bind/zones/mydomain.com.db"; }; zone "1.168.192.in-addr.arpa" { type master; file "/etc/bind/zones/rev.0.168.192.in-addr.arpa"; };

  Read the article

< Previous Page | 214 215 216 217 218 219 220 221 222 223 224 225  | Next Page >