Search Results

Search found 17325 results on 693 pages for 'idle computer'.

Page 218/693 | < Previous Page | 214 215 216 217 218 219 220 221 222 223 224 225  | Next Page >

  • Printing on Windows 8 64-Bit through Windows Server 2008 (32 Bit) RemoteApp

    - by Chris
    We have a network where our server is running on Windows Server 2008 (32 Bit) and a client computer is running on Windows 8.1 (64 bit) with a local printer attached to the client. The printer is an HP P1006. The remote app works well but when trying to print we get an odd "error 545". We have tried both using the "connect client printer" function in remoteapp and also making the printer shared over the network and printing to it via the network from within the remoteapp. Nothing works. We can print a test page from the server to the client computer just fine, but it seems from remoteapp we cannot. We have also tried installing the 32 bit drivers on the 64 bit machine as both the primary and secondary drivers but cannot get them to install. Suggestions please? We've been going crazy over this issue.

    Read the article

  • Offset AND incremental backup

    - by Pyrolistical
    I already do backups from my main computer to my server computer using synctoy. But now I also want to do off-site backup. My idea so far: have source hard drive (we'll call S) at home have backup hard drive at work called B have transport hard drive called T connect T at work and record index of files on B take T home and check index of S and note new/changed/deleted files and copy changed files to T take T to work and update S repeat Its basically a sneakernet and using all of the advantages of it. High bandwidth, low latency. Is there some software to do this, or do I have to write it myself?

    Read the article

  • Internet problems

    - by dan
    I've got problems on my freshly installed windows Xp machine. I cannot connect to the internet and I've tried various 'solutions' provided to me by the help and support center. Surprisingly none of them worked... Anyways, I've got 3 pc's next to me sharing a lan which is connected to the internet though a modem. The computer I use right now uses windows xp aswell and runs without any problems. I've tried everything on not working computer. I've ran the connection wizard several times, but it's not working :( Also I've very little experience with this version of windows, so I'm sorry if the solution is obvious.

    Read the article

  • Huge HDD response time in Resource monitor

    - by Mille
    Just bought all parts for a computer and put it together and installed a fresh version of windows 7. After a while, when using the computer it gets very slow, and even closing down windows can take several minutes. I started to look in the resource monitor and though I found the answer watching my hdd. The thing is that the hdd completes all tests in Seagate's SeaTools for Windows successfully. Which makes me doubt on the problem and weather I can send it in to get an replacement. Suggestions on what it could be and what I can do about it? Here a screenshoot from the resource monitor:

    Read the article

  • Is Windows Server 2003 on 96 MB possible?

    - by Nifle
    I have an old laptop, a Pentium II with 96 MB. I have had Windows 2000 on it for ages, it was slow but usable. But now I have to upgrade since I can't get my USB-wlan drivers to install (the old PCMCIA network card broke). I would prefer to install Windows XP but I have no spare licence, but I do have a Windows Server 2003 licence. Do you think it's possible (and usable) to squeeze in 2003 on this computer? Edit: Unfortunately 2003 simply refuses to install on the laptop. It hangs with an error message (paraphrased) 2003 has detected a problem with your computer and has halted the installation to prevent damage. And then some error codes This happens very early in the installation while it's copying the installation files just after I accepted the licence. So I give up for now.

    Read the article

  • Pick Up BioShock and Bioshock 2 for Price of a Big Mac Meal

    - by Jason Fitzpatrick
    Pre-ordering just opened on the third-installment of the highly-acclaimed horror-survival game series BioShock, BioShock Infinite. As part of the pre-order promotions, you can pick up a bundled copy of BioShock and BioShock 2 for a song. For the unfamiliar, BioShock is an atmospheric first-person-shooter backed up by an incredible storyline set in the underwater utopian-turned-dystopian city of Rapture. BioShock 2 continues the story in Rapture and the upcoming release (Febuary 2013) of BioShock Infinite takes place in the same game universe but fifty years before the events of the first two installments. If that seems like the kind of game you could dig into, Amazon has the Windows-platform version of BioShock and BioShock 2 bundled together for a scant $7.49–81% off the Steam and general retail price. The best part about the promotion is you can either download the games from Amazon or, for those of you that use Steam, you can simply plug the game product key into Steam. You can read more about the both the original two games and the upcoming release at the official BioShock site. BioShock Dual Pack [via Geeks Are Sexy] How Hackers Can Disguise Malicious Programs With Fake File Extensions Can Dust Actually Damage My Computer? What To Do If You Get a Virus on Your Computer

    Read the article

  • Transferring analog media (VHS casettes, vinyl records) to PC

    - by Javier Badia
    I have some VHSs and vinyl records which I'd like to convert to DVDs and CDs, respectively. I have a couple of questions about how to hook the devices up to the computer. I've seen some RCA-to-USB cables on the Internet like this one. Will those work for connecting the VCR to the computer? And what program would I use to take that and save it as a video file? Can I connect the phonograph directly to the Line In port in my PC or do I need some amplifier or something in the middle? I'm using Windows 7 x64, if it matters.

    Read the article

  • What "file system" is supported by Windows and Linux?

    - by Skiroid
    I'm setting up a media centre for my living room so that I'm able to watch downloaded films and TV shows on the big screen. The media centre is an old small computer which will have XBMCbuntu 12 installed on it. Right now, the media centre has a 300 GB HDD partitioned into two: 1) Ext4 50 GB (where I'll install the OS) 2) swap 6 GB (swap area) I'm wanting a third partition which I can store all my media on to. This partition will fill the rest of my HDD. Although, I'm stuck on which file system I should set it to. I need the file system to be fully compatible with Windows as I'm going to be removing the HDD from the media centre and plugging it into my main PC, running Windows 8, to transfer the media onto it. I can't transfer over Wi-Fi as the media centre won't be connected to the Internet. My options are: Ext4 journaling, Ext3 journaling, Ext2 journaling, ReiserFS journaling, btrfs journaling, JFS journaling, XFS journaling, FAT16 and FAT32. I know that FAT32 is compatible with Windows but it can only hold files that are 4 GB or less and my films are well over 4 GB. Some more than 10 GB. Is there a file system I can use which is supported by Linux and pops up under Computer in Windows?

    Read the article

  • I have been told to accept one error with Memtest86+

    - by DustByte
    Bought a new computer back in August with 4x4 GB RAM. Had problems with the RAM. They sent me four new sticks, which also generated errors. Singled out four sticks (from the eight I now had) that didn't generate any errors. Discovered by coincident a new RAM error last week (this time no BSOD). Contacted the company. According to them there have been issues with a bad stock from last summer so I got two tested 8 GB sticks sent to me. Been running Memtest86+ over the weekend. After 20 hours I got an error (see attached photo). The test has now been running for 37 hours but so far only this one error. I contacted the company where I bought the computer. They wrote back: I wouldn't worry about hat one fail. We have had similar situations here whereby it passes numerous times but then fails once. We think it's an issue with memtest, after all memory is faulty or it isn't so you can't really have it pass a few times, fail the next time around and then pass again! Please trust me on this and continue with the memory we sent you and if your problems continue we'll look at getting it replaced again. I gather from other forum posts that many people do not accept a single error. What could this single error signify, faulty RAM or a glitch in the MEMTEST program (or other)? Update: From the helpful comments below I conclude that an occasional (and rare) "random" error could occur and be acceptable, but repeated errors at the same address would indicate malfunction. Memtest has now run for 45 hours and I still have only one error. For everyone's information, I will keep running the test. In less than two days I am going away for a month. I will most likely leave Memtest running. As I do not have a UPS there is a risk that a power outage will ruin the experiment. The computer is a desktop so I cannot bring it with me (which would curiously have exposed it to more cosmic rays as I will be flying ;)).

    Read the article

  • StreamInsight Now Available Through Microsoft Update

    - by Roman Schindlauer
    We are pleased to announce that StreamInsight v1.1 is now available for automatic download and install via Microsoft Update globally. In order to enable agile deployment of StreamInsight solutions, you have asked of us a steady cadence of releases with incremental, but highly impactful features and product improvements. Following our StreamInsight 1.0 launch in Spring 2010, we offered StreamInsight 1.1 in Fall 2010 with implicit compatibility and an upgraded setup to support side by side installs. With this setup, your applications will automatically point to the latest runtime, but you still have the choice to point your application back to a 1.0 runtime if you choose to do so. As the next step, in order to enable timely delivery of our releases to you, we are pleased to announce the support for automatic download and install of StreamInsight 1.1 release via Microsoft Update starting this week. If you have a computer: that is subscribed to Microsoft Update (different from Windows Update) has StreamInsight 1.0 installed, and does not yet have StreamInsight 1.1 installed, Microsoft Update will automatically download and install the corresponding StreamInsight 1.1 update side by side with your existing StreamInsight 1.0 installation – across all supported 32-bit and 64-bit Windows operating systems, across 11 supported languages, and across StreamInsight client and server SKUs. This is also supported in WSUS environments, if all your updates are managed from a corporate server (please talk to the WSUS administrator in your enterprise). As an example, if you have SI Client 1.0 DEU and SI Server 1.0 ENU installed on the same computer, Microsoft Update will selectively download and side-by-side install just the SI Client 1.1 DEU and SI Server 1.1 ENU releases. Going forward, Microsoft Update will be our preferred mode of delivery – in addition to support for our download sites, and media based distribution where appropriate. Regards, The StreamInsight Team

    Read the article

  • IPsec VPN tunnel between Windows 2008 R2 and CISCO ASA?

    - by antur123
    I need to create a VPN IPsec tunnel between my Windows 2008 R2 server and a CISCO ASA device. I want my server to be both the end of the tunnel, and the server that connects to the other side (no need to connect a whole subnet, just the server would be fine). I found this article that seems to do the trick, but there are two differences: As mentioned above, the computer behind my end is the server itself. Can that be configured? (i.e. make the "computers in endpoint 1" IP address be the same than "local tunnel computer"). This article is for Juniper ScreenOS, not for CISCO ASA, though configurations look very similar. Would that configuration work for me?

    Read the article

  • Is there a limit on the number of USB external drives?

    - by Beska
    I've got three external HDDs, all My Books, 500 GB, 750 GB, and 1 TB. If I hook one or two of them up to a computer, everything seems fine. If I hook all three of them to a computer (I've tried this on two different computers, one running Windows XP, one running Windows Vista), the bootup time goes up by more than an order of magnitude. It can suddenly take about 10-20 minutes to boot the machine, whereas before it might take a minute. All three drives work fine on their own. I'm not using any kind of hub; all three are plugged directly into the machine. Is this associated with some kind of inherent limit in USB? Is this bad hardware design in the CPU box? Is this a My Book problem?

    Read the article

  • Can't mount home after trying to resize (bad geometry: block count exceeds size of device).

    - by Lynn
    This is on a fresh computer (super computer actually). It got to me with 15T on the home mount and 50G on the root. I tried allocating 7T to root and resizing (since I'm putting a local yum repo on this machine as it has no internet access nor will it ever). I tried following the instructions here: Centos 6.3 disk space allocation but something went wrong and the home won't mount again. Instead I get from dmesg | tail: EXT4-fs (dm-2): bad geometry: block count 4294967295 exceeds size of device (1342177280 blocks) df -h nets this output: Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup-lv_root 7.0T 3.6G 6.6T 1% / tmpfs 190G 216K 190G 1% /dev/shm /dev/sda1 485M 38M 422M 9% /boot I didn't have any files on /dev/mapper/VolGroup-lv_home. Will simply running mke2fs fix it to be mountable? What sort of options should I run it with. I've never resized volumes before or used mke2fs. I don't want to make this mess worse.

    Read the article

  • Building a complete program?

    - by Bob
    Reading books, watching videos, and reviewing tutorials is all very easy. Taking notes and actually learning the material may be slightly harder, but even then, anyone with a decent brain and a fair amount of interest, it's easy enough (not to mention, fun). The thing is, it doesn't really prepare you to write a full program or website. Let's say you're those teens (only in highschool, no true (college level) computer science or programming courses, and no real world experience), and you come out with Groupon. Or even Mark Zuckerburg, sure he was a genius, and he was a very capable programmer... but how? How do you recommend that people who are not necessarily new to programming, but new to programming real applications and real programmers go about developing it? What is the "development process" - especially for single programmers (or maybe 2-3 teens)? Also, as far as web development goes, what is the process? Was something like Facebook or Groupon written with a framework (like CodeIgniter or Zend for PHP)? Or do they develop their own frameworks? I'm not asking how to come up with a great idea, but how to implement great ideas in an effective way? Does anyone have advice? I've read a couple of books on both C and C++ (primarily the C Programming Language and the C++ Programming Language) and taken AP Computer Science (as well as read a few additional books on Java and OOP). I also have read a few tutorials on PHP (and CodeIgniter) and Python. But I'm still in highschool, and I'm technically not even old enough to work at an internship for a few more months.

    Read the article

  • hardware: delay and distinct 'click' before hard drive access

    - by matt lohkamp
    I have a windows 7 box stashed away in my closet, containing (among other things) 2 big HDDs linked together as a mirrored volume - basically a super lazy NAS / media server. I've noticed that when that drive is accessed (whether locally, on the machine itself, or remotely, from another computer, or my xbox, for example) there's a noticeable pause, and then from the computer itself, a 'click!' noise, after which the drive is accessed; e.g. open \\computername\shared\, wait 2 seconds, hear 'click!' and then see files appear in windows explorer. Any ideas? Otherwise the drive preforms normally - is it a windows thing? a HDD-about-to-die thing? Or a "yeah that always happens, you've just never noticed it before" thing?

    Read the article

  • Windows 7 "Could not reconnect all network drives" on boot

    - by Thermionix
    Windows 7 won't reconnect to my network drives on startup. Once it is done booting opening Windows Explorer and clicking each share will mount them. Windows 7 Enterprise N Service Pack 1 I have attempted formatting the windows machine - first thing done to machine was to map the network drives, upon reboot they were disconnected. It is running on an Crucial M4 64gb SSD. The host of the network shares is a Ubuntu-Server machine connected through a gigabit switch. A modem provides dhcp, although both these machines have static IP's defined. It won't reconnect the drives regardless of whether they're SAMBA shares or NFS shares - therefore I believe it's an issue with the windows machine. Ubuntu 11.10 (GNU/Linux 3.0.0-12-server x86_64) I've tried using ip address instead of netbios name for mapping shares on the windows machine, Also tried setting EnableLinkedConnections=1 gpedit.msc Computer Configuration - Administrative Templates - System-Logon - always wait for the network at computer startup and logon = yes

    Read the article

  • Dual-Boot Problem

    - by user171379
    I have a HP laptop that originally had Windows 7 OS on it, I partioned the drive and allocated 100gb (est.) for the ubuntu install. the install went fine i have ubuntu and windows 7 still on the computer. But I can not get the OS boot screen to show ubuntu as an OS. I can while start up pull up the start menu screen via ESC. Key and press F9 for Boot Device Options and get the boot manager screen and it lists... OS boot manager, Ubuntu (Hitachi HTS 543232A7A384), boot from EFI file, and Notebook Hard Drive... I can boot Ubuntu from this screen by selecting Ubuntu. But i would like to make it easier to access. The computer boot is not for myself otherwise it would not be a problem i would remove windows altogether. I would like to make it basically "User Friendly" if that's at all possible and make the OS boot screen show Ubuntu as a bootable OS as well as Windows 7. on the boot selection screen. Any help on this issue would be greatly appreciated, I've looked to see if i could find the answer and maybe i've overlooked something so here I am. Like i said i need it to be as user friendly as possible and force the user to choose windows 7 or ubuntu not send them into one or the other without them being allowed to choose. I can get any information you might need if necessary but i dont know exactly what you'll need other than what i've given. Ubuntu version is the 13.04 just so you know.

    Read the article

  • USB keyboard not working under Windows 7 x64?

    - by Comboo
    I have two USB keyboards, one no-name cheap thing and an old Logitech. When I plug them in to my computer they pop up in Device Manager as an "Unknown device" and "USB-receiver", respectively. Both of them fail to install any drivers, neither automatically or through Windows Update. Both keyboards work perfectly on another computer I have with Windows Vista 32-bit. Can this be one of those cases where a device does not work in a 64-bit version of Windows? I doubt it though since I've never had that problem before with any device and I thought that basic things like keyboards would be kind of failsafe. I don't really know how to start debugging this issue. I've tried all the obvious, rebooting, changing the USB port, etc. Are there any generic x64 keyboard drivers you can use? Is there any way to find the manufacturer of the keyboard over USB? There is nothing written on it.

    Read the article

  • How to fix Windows XP from muting sounds on every startup?

    - by Rookie
    This started to happen few days ago: Every time I start up my computer, the global sound volume ("Playback") is set to muted (from the checkbox), in the sound control panel. So I have to open the control panel every time i start up my computer, and click that checkbox. I have got this bug before, long time ago. I have no idea why is this happening. Any ideas how to fix this or what is causing it? I have SP 3 and most updates installed a half year ago or less.

    Read the article

  • Intel hybrid graphics stuck in power save mode

    - by OZZIE
    I have an Asus UL30V with Intel hybrid graphics. When I bought it it used to switch to turn of the better graphics card to save power and run on a more power effecient one. When I connected the laptop to a power source again I could go to the intel graphics icon on the task bar and click on "switch to enhanced performance mode" or something similar. But like 2-3 months ago it suddenly vanished. I cannot switch modes anymore, it's gotten stuck in power save mode. I can change the windows power setting but that doesn't enable the better graphics card :( What should I do? I've tried restarting the computer and that does not work. I really hope I don't have to reinstall the drivers! It seems like other people have had the same issue: http://en.community.dell.com/support-forums/laptop/f/3518/p/19422695/19994601.aspx , he hasn't even got the same computer as me. I have windows 7 Home Premium x64 Any ideas?

    Read the article

  • Cannot Delete "Account Unknown" account in Windows XP SP3

    - by naspinski
    If I Right click on My Computer, Select Properties, then click on Advanced-User Profiles-Settings, I get a list of user accounts on my machine and I see a few that are "Account Unknown" in there with large profiles and I want my space back. I am assuming this is because these users are long gone and AD no longer recognizes their SIDs. The problem is that the Delete button is grayed out, but only for the accounts, the ones that are recognized, I can delete jsut fine. These accounts do not show up in Computer Management at all, and I am an administrator on my machine - any ideas on how to delete them?

    Read the article

  • Cannot view, use, or open CDs or DVDs in Ubuntu 12.04

    - by user67592
    I am fairly new to Ubuntu 12.04 and I have encountered a rather irritating problem. Whenever I insert a CD or DVD (whether it have data, music, movies, or nothing at all), nothing pops up saying "you have inserted a CD", "play with Rhythmbox?" etc. It doesn't show the CD in the launcher/dock or anything of the sort. This is especially peculiar because not only do I have a standard IDE built-in optical drive, but I have an external USB optical drive. Neither work. In addition, whenever I go to "Computer///" and I click (double click, right click, or even left click) on "CD/DVD Drive" nothing happens, when I right click and select "Open" nothing happens either [for either of the two drives (both are listed in Computer///)] And if I insert a blank disk and go to a disk burning program such as Brasero, and try to burn to the drive it detects no CDs or DVDs of any kind. I'm rather stumped and can't seem to find a question similar to this. :( Thanks for all your help in advance!! :) ~Preston Output of sudo lshw *-cdrom description: DVD-RAM writer product: CD/DVDW TS-H652M vendor: TSSTcorp physical id: 0.0.0 bus info: scsi@5:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/sr0 version: 0414 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-cdrom description: DVD reader product: DVD Writer 300n vendor: HP physical id: 0.0.0 bus info: scsi@4:0.0.0 logical name: /dev/cdrom2 logical name: /dev/cdrw2 logical name: /dev/dvd2 logical name: /dev/sr1 version: 1.25 serial: [ capabilities: removable audio cd-r cd-rw dvd configuration: status=nodisc

    Read the article

  • Proper way to connect SATA and IDE Hard drives together?

    - by Bartek
    I have an old IDE hard drive that has a broken Windows install on it. It just won't boot up, and I've tried a variety of solutions. That's fine, I really just need a few files on the hard drive. I have a computer that uses a SATA connected hard drive. It's a working PC. I would like to connect the old IDE hard drive to that compute and basically browse through the file system, grab the files, and copy them to my existing computer. My problem is with my few attempts to connect the IDE drive I would get Boot Disk Failures and so forth. I guess it's trying to boot from the IDE but I'm not really sure. Any help would be appreciated, Thanks!

    Read the article

  • How to bypass Forefront TMG for downloading from Adobe Cloud

    - by user1006272
    I hope that this question has not been asked as I've spent a couple of days googling around trying to find a solution. I have one computer that needs to download from Adobe Cloud to install applications like Photoshop etc... The issue I'm having is that Adobe uses a download manager program (AdobeApplicationManager.exe) that just keeps incrementing the time left on the download of any app like Photoshop. Is there a way to allow just the download manager from that one computer to bypass any filtering settings in Forefront TMG 2010? I have very little knowledge of servers / ISA servers / Forefront TMG and have been thrown into this position by luck I guess. Any help with this would be highly appreciated. Thanks in advance.

    Read the article

< Previous Page | 214 215 216 217 218 219 220 221 222 223 224 225  | Next Page >