Search Results

Search found 30486 results on 1220 pages for 'network level auth'.

Page 218/1220 | < Previous Page | 214 215 216 217 218 219 220 221 222 223 224 225  | Next Page >

  • Why can't I connect to computers on my network using our external IP address?

    - by Kivin
    My home network is serviced by an ADSL line. The modem is in bridged mode. The router performs the PPPoE. Three computers are connected to the router: two wired Windows 7 boxes and a Ubuntu Linux box over wifi. The computers are hosting various forms of services including FTP and HTTP. The router has port forwarding mapped from the relevant ports to the reserved IP addresses for the computers. If I attempt to connect to a server inside the network, such as ftp://67.xx.xxx.xxx from inside the network, the request times out. However if I connect using the internally mapped address, such as ftp://192.168.0.100, all is well. This is a nuisance for setting up software, especially on the laptop which needs to be able to phone home from anywhere, and I just don't have enough expertise with networking to know why this is occurring to even have a clue whether it can be solved or not. edit: It should be noted that the servers can be accessible outside the network - say, at the starbucks across the street - perfectly fine, using the ISP provided address and the appropriate port.

    Read the article

  • How do i set up a fully featured small business network?

    - by JoshReedSchramm
    This has the possibility to be a very large question but I recently acquired a few rack mount servers and the hardware necessary to run them. Unfortunately I'm a programmer with very little understanding of how to set up a good working network so I'm hoping someone on here might be able to help. What I want to do is run a domain with a series of subdomains which would all be externally accessible. The setup would live inside my home and my internet connection is your run of the mill cable model (which means a dynamic IP) I want to be able to set up a couple site, specifically: www.mycompany.com (mycompany.com with no subdomain would redirect to this) build.mycompany.com (for my continuous integration server) ruby.mycompany.com (for ruby projects) win.mycompany.com (for windows project) etc. Additionally this is still my home network so our personal machines need to be able to get on via wifi with at least the same security we have now through an out of the box router from best buy. I'm thinking i need a DNS server, DHCP server and one of those would run either no-ip or dyndns to accommodate the dynamic ip. I don't necessarily need mail but it might be helpful to have some sort of mail server i could use for testing, it doesn't need to get out to the greater internet though. So how do i set up this kinda of network? tl;dr Need to know how to set up your standard office style network in my home off my normal consumer level cable modem connection.

    Read the article

  • How can I debug solutions in Visual Studio 2010 from a network share?

    - by alastairs
    I've recently got a new Mac laptop and am running VS2010 in a Parallels virtual machine. It's mostly working out well for me, but I'm having some problems with debugging specific project types, related to the fact that the projects are being accessed via a network share. Test projects don't run because the test runner can't load the tests' DLL. Web projects fail to run in the Visual Studio mini web server, throwing the following exception: 'An error occurred loading a configuration file: Failed to start monitoring changes to path\to\web.config'. I've spent the evening trawling the web with little luck on this. After reading these two posts, I tried out the usual CasPol changes, but then found this post from one of the early VS2010 betas indicating that CasPol is no longer needed/supported in .NET 4.0 and VS2010. The network share is accessible via both a mapped drive and the UNC path. The virtual machine runs its applications under the administrator account, which appears to have all the necessary permissions on the network share to create, read, write and delete files and folders. I say "appears to have" as I can't view the Security Properties of the appropriate folder via Explorer: the Security tab just isn't present. Has anyone managed to successfully load and debug web and test projects from a network share in VS2010?

    Read the article

  • pam auth via winbind, howto map primary group for users?

    - by dr gonzo
    I have unix users authenticating to an PDC (via winbind) and want to have the primary group of those users a local unix group (e.g. www-data). users have the group "domain users" with gid 10006 (as the gid winbind mapping) idmap uid = 10000-20000 idmap gid = 10000-20000 winbind enum groups = yes winbind enum users = yes winbind use default domain = yes winbind nested groups = yes but want that the primary group is 33 for all users (www-data) how to achieve that?

    Read the article

  • Which is better for multi-use auth, MySQL, PostgreSQL, or LDAP?

    - by Fearless
    I want to set up an Oracle Linux 6 server that gives users secure IMAP email (with dovecot), Jabber IM, FTP (with vsftpd), and calDav. However, I want each user logon to be able to authenticate all services (e.g. Joe Smith signs up once for a username and password that he can use for email, ftp, and his calendar). My question is, which database service will be best suited for that application? Also, is there a way to link the database with the preexisting server shell logins (e.g. so I can read the root account's LogCheck emails on a different device)?

    Read the article

  • How to simulate htaccess for auth with IIS without having access to the server config ?

    - by bgy
    Hi, I need to put a website on windows server IIS, i'd like to use basic authentification like i'd do with Apache, with the .htaccess / .htpasswd I read here & there, that i could do this through the admin tabs of IIS, but i'm not the administrator, and i only have ftp access. It seems to be a 'web.config' file where i could do this. Is there a way to set up such things within a config file ? I'm not used to work with IIS...

    Read the article

  • How to route between 2 networks with a server with 2 network cards?

    - by LumenAlbum
    This is the first time I am faced with routing and it seems I have hit a dead end. I have the following scenario: client1: 192.168.1.10 255.255.255.0 gateway: 192.168.1.100 DNS server: 192.168.1.100 client2: 192.168.1.20 255.255.255.0 gateway: 192.168.1.100 DNS server: 192.168.1.100 server (Windows Server 2008 R2 with enabled RAS & Routing Services) network card 1 (connected to a switch along with the clients) 192.168.1.100 255.255.255.0 DNS server: 127.0.0.1 network card 2 (connected to the router) 192.168.2.100 255.255.255.0 gateway: 192.168.2.1 DNS server: 127.0.0.1 (DNS forwarding to 192.168.2.1) ISP router (with connection to internet) 192.168.2.1 Now in this scenario I have tried to route traffic from the 192.168.1.0/24 network with the clients to the 192.168.2.0/24 network with the routers to connect them to the internet. However, no matter what I do I get no positive ping to the router 192.168.2.1. Ping from 192.168.168.1.10 to 192.168.1.20: Success to 192.168.1.100: Success to 192.168.2.100: Success to 192.168.2.1: not reachable The routing table contains the 2 routes 192.168.1.0 and 192.168.2.0 as directly connected. Does anyone know where the routing fails? I have searched different forums but mostly found nothing relevant. One post however pointed out that in a similar situation the problem was that the router doesn't know the way back and the internet router would need a static route back to the first router. If that really is the case, I take it there is no solution with my equipment, because the standart ISP router doesn't allow to set any static routes.

    Read the article

  • How to use basic auth for single file in otherwise forbidden Apache directory?

    - by mit
    I want to allow access to a single file in a directory that is otherwise forbidden. This did not work: <VirtualHost 10.10.10.10:80> ServerName example.com DocumentRoot /var/www/html <Directory /var/www/html> Options FollowSymLinks AllowOverride None order allow,deny allow from all </Directory> # disallow the admin directory: <Directory /var/www/html/admin> order allow,deny deny from all </Directory> # but allow this single file:: <Files /var/www/html/admin/allowed.php> AuthType basic AuthName "private area" AuthUserFile /home/webroot/.htusers Require user admin1 </Files> ... </VirtualHost> When I visit http://example.com/admin/allowed.php I get the Forbidden message of the http://example.com/admin/ directory. How can I make an exception for allowed.php? If not possible, maybe I could enumerate all forbidden files in another Files directive? Let's say admin/ contains also user.php and admin.php which should be forbidden in this virtual host.

    Read the article

  • why is Mac OSX Lion losing login/network credentials?

    - by Larry Kyrala
    (moved from stackoverflow...) Symptoms So at work we have OSX 10.7.3 installed and every once in a while I will see the following behaviors: 1) if the screen is locked, then multiple tries of the same user/pass are not accepted. 2) if the screen is unlocked, then opening a new bash term may yield prompts such as: `I have no name$` or lkyrala$ ssh lkyrala@ah-lkyrala2u You don't exist, go away! Even when our macs are working normally, everyone here has to login twice. The first time after boot always fails, but the second time (with the same password, not changing anything, just pressing enter again) succeeds. Weird? Workarounds There are some workarounds that resolve the immediate problem, but don't prevent it from happening again: a) wait (maybe an hour or two) and the problems sometimes go away by themselves. b) kill 'opendirectoryd' and let it restart. (from https://discussions.apple.com/thread/3663559) c) hold the power button to reset the computer Discussion Now, the evidence above points me to something screwy with opendirectory and login credentials. Some other people report having these login problems, but it's hard to determine where the actual problem is (Mac, or network environment?). I should add that most of the network are Windows machines, but we have quite a few Macs and Linux machines as well, but I'm not sure of the details of how the network auth is mapped from various domains to others... all I know is that our network credentials work in Windows domains as well as mac and linux logins -- so something is connecting separate systems, or using the same global auth system.

    Read the article

  • Office documents on intranet all requiring second login and can't pass auth? Disable webdav?

    - by DOTang
    I am not sure what is going on, but recently all the Office documents on our intranet get prompted a second time for login and according to the error logs it looks like it's trying to use webdav to open (an editable?) version of the document to save directly on the server? We have no sharepoint server setup or anything, but this shouldn't be happening. All I want is for the document to be saved or opened from a local copy in temp like normal. Here is the log: Line 57499: 2011-04-12 15:57:10 (ip) OPTIONS (address) - 443 (username) (user ip) Microsoft-WebDAV-MiniRedir/6.1.7601 - 401 1 1326 1525 238 0 Line 57500: 2011-04-12 15:57:10 (ip) OPTIONS (address) - 443 (username) (user ip) Microsoft-WebDAV-MiniRedir/6.1.7601 - 401 1 1326 1525 238 0 Line 57501: 2011-04-12 15:57:10 (ip) OPTIONS (address) - 443 (username) (user ip) Microsoft-WebDAV-MiniRedir/6.1.7601 - 401 1 1326 1525 238 0 The log basically contains a bunch of these. How can I disable this behavior so that office documents that are downloaded aren't attempted to be used through webdav?? Edit: I should clarify behavior, it asks if you want to save or open it, upon choosing open open, it asks to re-authenicate, you put in the user information and the login box comes up 3 times acting like you entered the wrong password. For some users, after passing the login box the third time, it still opens up, for others their browser just locks up. It also doesn't even look like webdav is installed on our server, I see no config options in IIS for it as outlined on this page: http://learn.iis.net/page.aspx/350/installing-and-configuring-webdav-on-iis-7/#001

    Read the article

  • Bypass network stack. Which options do we have? Pros and cons of each option [on hold]

    - by javapowered
    I'm writing trading application. I want to bypass network stack in Linux but I don't know how this can be done. I'm looking for complete list of options with pros and cons of each of them. The only option I know - is to buy solarflare network card which supports OpenOnLoad. What other options should I consider and what is pros and cons of each of them? Well the question is pretty simple - what is the best way to bypass network stack? upd: OpenOnload It achieves performance improvements in part by performing network processing at user-level, bypassing the OS kernel entirely on the data path. Intel DDIO to allow Intel® Ethernet Controllers and adapters to talk directly with the processor cache of the Intel® Xeon® processor E5. What's key difference between these techologies? Do they do roughly the same things? I much better like Intel DDIO because it's much easy to use, but OpenOnload required a lot of installation and tuning. If good OpenOnload application is much faster than good Intel DDIO application?

    Read the article

  • Is there some file browser that uses low level functions to browse hard disk?

    - by watbywbarif
    I have Windows 7, NTFS hard disk. I have detected rootkit files but can't delete them through Windows explorer, obviously because they are not visible. Is there some other file browser that is using low level function calls, lower that win api, so that I can try to see and study these files before removal. I know the exact locations. I know that I can load some live CD and delete them, but I wonder about the first possible solution.

    Read the article

  • auth user and exec a node app only with apache?

    - by Blame
    I couldn't find an answer on the web and I'm trying for days now so I hope that someone with more experience with apache can help me out. Iam writing an web editor and the user should be able to edit a file that is on the server in a directory the user has access to. The problem Iam facing is that I need to authenticate against the system users (shadow/passwd). So the user should be able to login whith a system account and then the node app which does all the logic should be started with the users rights. I hope to get this working without any additional script and only with Apache. I found out two things: I can use mod_auth_pam to authenticate the user There is a mod called suEXEC which can exec the node app with a specified user The problem is that I have to hard code which user is used by suEXEC but I want to decide when the user logs in. Is there any way to authenticate a user against the shadow/passwd and then exec a prog with the users rights? I dont want to run the node app as root and the user should only be able to access his own files. Any help would be appreciated! Thanks, Kodak

    Read the article

  • Is there a way to have tortisesvn use Windows 7 kerberos tickets to auth against an apache svn server?

    - by jmp242
    I have putty able to use gssapi on my Windows 7 x64 clients against kerberos logins for SSH. I.e. it forwards the ticket you get when you log in to windows. I can't figure out how to get tortiseSVN to do the same. I can get it to prompt me for my credentials every time I do ANYTHING and they work, by changing from neon to serf in the config file. But I need it to use the ticket so I don't have to continually type in my username and password. If Tortise can't do this, does anyone know of an svn client for Windows that does?

    Read the article

  • How to improve network performance between two Win 2008 KMV guest having virtio driver already?

    - by taazaa
    I have two physical servers with Ubuntu 10.04 server on them. They are connected with a 1Gbps card over a gigabit switch. Each of these host servers has one Win 2008 guest VM. Both VMs are well provisioned (4 cores, 12GB RAM), RAW disks. My asp.net/sql server applications are running much slower compared to very similar physical setups. Both machines are setup to use virtio for disk and network. I used iperf to check network performance and I get: Physical host 1 ----- Physical Host 2: 957 Mbits/sec Physical host 1 ----- Win 08 Guest 1: 557 Mbits/sec Win 08 Guest 1 ----- Phy host 1: 182 Mbits/sec Win 08 Guest 1 ----- Win 08 Guest 2: 111 Mbits /sec My app is running on Win08 Guest 1 and Guest 2 (web and db). There is a huge drop in network throughput (almost 90%) between the two guest. Further the throughput does not seem to be symmetric between host and guest as well. The CPU utilization on the guests and hosts is less than 2% right now (we are just testing right now). Apart from this, there have been random slow downs in the network to as low as 1 Mbits/sec making the whole application unusable. Any help to trouble shoot this would be appreciated.

    Read the article

< Previous Page | 214 215 216 217 218 219 220 221 222 223 224 225  | Next Page >