Search Results

Search found 17130 results on 686 pages for 'computer lab'.

Page 219/686 | < Previous Page | 215 216 217 218 219 220 221 222 223 224 225 226  | Next Page >

• Autoplay for USB drive keeps popping up

  - by Adam Haile

  I have a Seagate external 2TB USB drive that when I leave it plugged in, the Autoplay dialog asking what to do with the drive pops up about once every 30-60 minutes. No matter how many times I tell it to go away, it keeps coming back. I have tried multiple power supplies, USB cables, and all the USB ports on my machine...but it keeps doing the same thing. Also, this does not happen with the same drive on a different computer. Could this be some power or configuration setting that is causing this? I'm running Windows 7 x64 (the computer it works on is x86)

  Read the article

• How to create a Windows 7 installation usb from Linux or Mac?

  - by Shane

  I have a Windows 7 installation DVD that came with a computer with no optical drive. I have an empty USB thumb drive. I have access to two computers with optical drives, one running Linux and the other running Mac OS X. Notably, I do not have access to any Windows computer at this time. With the tools that I have, how can I create a thumb drive that I can boot with and install Windows 7? Do I have to look out for anything when making the ISO from the DVD (DRM or anything)? After the ISO is made, will UNetbootin work? How about dd?

  Read the article

• Browsing is much slower on one PC wired to the same router - why?

  - by deanalt

  Wife is not happy. It takes about 5 seconds to open a google window, versus about 1 second on the faster computer which is about 3 years old itself. Yes, it is an older computer (5 -6 years old, I'd guess), surely with less RAM, but for simple browsing, should it matter? Both are hardwired to the same Netgear Rangemax router. Both use fixed IP addresses. Both are XP. Both have about 8 feet of cable to the router. I have the fastest service my cable provides. Probably irrelevant but ...two newer MACs are connected wirelessely during the summer and they are even faster, but I think that's the difference in browsers. If you could point me to a list of process of elimination steps that would be most appreciated. Thanks Dean

  Read the article

• Why does my general frame rate slow down to 40fps randomly?

  - by Joshua

  This has been bugging me for a while. Every once in a while, I find my computer to be sort of laggy and I thought it was because it was busy or something. However, I recently noticed that it wasn't any performance issue...I thought my computer was laggy because the frame rate slowed from 75fps right down to ~40 fps and caused very visible tearing. This is not rare. It happens many, many times a day. I have no idea what is happening...I have an AMD 5670 on Windows 7 32-bit by the way, and I've heard bad things about AMD's driver support. Could this be the problem? P.S. The frame rate slowdown is not just for games (I rarely play games, and have not played games in the time since I noticed this problem), it seems it's an issue for the entirety of Windows. I first noticed the tearing when I was moving around tabs in Google Chrome.

  Read the article

• Be your own cloud [closed]

  - by Jedi

  I have reasonably many electronic gadgets that can go LAN or WI-FI. But how do you share and/or syncronize all your files among them? Well, between my laptops and my desktop I use Dropbox. A nice way to share files among computers. But what if your HDD on your laptop is not large enough to carry music, pictures and films. Normally you would buy an extern USB HDD and store them there, but then you cannot reach the files from other computers which are not connected to the USB device. Many would say I should use a solution like a cloud with a disc station or something like that. But my needs are follows: A mass storage which can be reached among devices (laptops, desktops, iPhone, Android phone, XBox or Playstation). Has low power requirements and is silent. Can be reached inside home and it would be nice if it could be reached outside home as well. Cheap I have looked around and I have found an wireless router which can share a USB device: D-Link Wireless N HD Media Router. I thought it would be an interesting solution for a simple local cloud solution. D-Link uses a little program called SharePort Plus which mount the USB device to your computer. Unfortunately is the transfer rate to the USB storage device rather disappointing. The transfer rate was 5.8 Mbps even though the distance between the laptop and the router was 2 meter. The same is happening when I use cable from the computer to the router. Another thing is that SharePort Plus only allows one computer be connected to the device at a time. The last thing was something I could live with. I have search on the Internet for other solutions and found this video from Synology. I'm not sure if their solution is the right one. I think a disc station connected to my home LAN could the right solution. What have you done in your home to store and share files among your computers and game consoles?

  Read the article

• The good SQL database to process a lot of data?

  - by Dorian

  I have to process like 10-100 millions records. I have to give the data to the client when it's finish. The data is givent as SQL requests to execute in the database. He have a powerful server with MySQL, I think it will be fast enough. The issue is my computer is not as powerful as his server, so I would like to use an other SQL server who is compatible (I export his database and import it in my computer) with MySQL but more powerful. What should I use? Or am I doomed to use MySQL?

  Read the article

• Office features disabled in standalone Outlook

  - by Jared275

  I have Office 2007 basic suite installed on my computer. I installed Outlook 2010 from a volume license provided by our Email Server Provider. When creating a new email all of the Office features are disabled in the ribbon. This microsoft support article describes my issue, however I do not have Office installed as click and run. It seems to me that there should be a way to make outlook recognize the office suite already installed. The "add or remove features" dialogue accessed through programs and features from the control panel seems promising, however its only options for "office features" are run from computer, or install on 1st run. I can't seem to find any valid articles online that aren't just dealing with the click to run issue. I know that there are several people at my company with the same set up, installed the same way that have everything working fine. How can I get my standalone Outlook 2010 install to recognize the Office 2007 basic suite?

  Read the article

• install clamav from surceforge

  - by maria

  I'm using Ubuntu 10.04. I'm affraid I've installed a virus on my computer (I've clicked a link which was a virus), I'd prefere to check if everything is fine. I've installed clamAV using Synaptic. The installed version was 0.96.5, while the most recent version is 0.97.6. When I was trying to update virus database, I got a warning that the version of clamAV I'm using is outdated. Since I didn't know how to update the software by Synaptic or apt (both show the installed version as the newest) I've uninstalled all and downloaded the recent version from sourceforge. I've unpacked the tar.gz archive, entered the folder but when I type ./configure I'm getting the message: configure: error: Please install zlib and zlib-devel packages When I type sudo aptitude install zlib zlib-devel The terminal output says there is no such packages (there is no package zlib-devel and there is many packages which name contain zlib). I suppose the link contained probably the Windows virus, but I'd prefere to make sure there is nothing in my computer. As well as I'm not sure if the virus, even without harming my system, can send itself to my e-mail contacts or not.

  Read the article

• Having internet on a VirtualBox

  - by S4M

  I am running a linux laptop and I set up a VirtualBox under windows XP. My only problem is the VirtualBox doesn't seem to be connected to internet - When I do the connection diagnosis it tells me there is no connection. I am using an NAT adapter, and I bind the port 80 from my computer to the port 80 of the VirtualBox, and same for the ports 8080, but still no result. I would be grateful is someone could help me to sort this out. EDIT: thinking of it, what is making the problem hard - and painful - is the absence of error message. If I try to use a given adapter to share my computer's connection with the VirtualBox, and it doesn't work, I have no way to know why. So, it would be really helpful if someone could share a way to access this king of information (is there a log file somewhere or a way to run VirtualBox from command line in a verbose mode?).

  Read the article

• Connect iPad to windows 7 VPN

  - by Linuz

  My iPad keeps spitting out the error: "A connection could not be established to the PPP server." I am trying to connect it to a VPN I set up with Windows 7 as an incoming connection. On the iPad, I went into the VPN settings, added a new PPTP VPN with the following information Server: Windows 7 Computer's IP RSA SecurID: OFF Account: Account Username Password: Account Password Encryption Level: Auto Send All Traffic: ON Proxy: Off Now I know that it is making some connection to the Windows 7 Computer because whenever I intentionally put in the wrong VPN password on the iPad, it makes me put in the correct one before trying to connect again. All the ports are forwarded on my router for PPTP, and my Windows 7 Firewall is even off to try to get this to work. Any help would be greatly appreciated, thanks.

  Read the article

• Is it safe to use an IDE to SATA power adapter for an extended period of time?

  - by qwertymk

  I just bought a computer from HP and they failed to include SATA power connectors with the power supply other then the one HD and DVD drive. Meanwhile I have two IDE to SATA power adapters that came with my "USB 2.0 to SATA/IDE cable" http://www.amazon.com/USB-2-0-SATA-Cable-Adapter/dp/B001OORN06 3rd pic on the left. I was wondering if I would just open up my computer and use it to plug it my SATA drives to the IDE power sources and mount it to the motherboard, would it damage my drives in the long run or have any other significant effects. A friend told me he knows people who have had their HD burn out because of this

  Read the article

• Website migration is not working for all computers

  - by Shadowizoo

  We got 2 servers on same network, Server-A and Server-B. On Server-A (widows server 2003), we have IIS 5.2 and our website was hosted on it few month ago (about 7-8 months). We bought a new server, Server-B (Windows Server 2008) with IIS 7.5 and copied our old website on this new machine. On our router, we forward the port 80 to Server-B. The Server-A is still on because we need to access some old data by our old website. I would like to access it with it's internal Ip (192.168.1.xxx/mywebsite) On my Windows 7 computer, if I write www.example.com or example.com (without www.), I'm being redirected to Server-B and I can see our new interface. On some Windows Vista computer, example.com (without www.) redirect to Server-B, but if I write www.example.com, I'm still on Server-A. In our website code (on Server-B), we sometimes redirect with a "www." so this is causing some error because we are trying to access a webpage that exist on Server-B but not Server-A and because the www.example I compared 2 computers with Vista Home on them and Internet Options looks the same. I cannot figure why this is happening

  Read the article

• Why is an Ext4 disk check so much faster than NTFS?

  - by Brendan Long

  I had a situation today where I restarted my computer and it said I needed to check the disk for consistancy. About 10 minutes later (at "1%" complete), I gave up and decided to let it run when I go home. For comparison, my home computer uses Ext4 for all of the partitions, and the disk checks (which run around once week) only take a couple seconds. I remember reading that having fast disk checks was a priority, but I don't know how they could do that. So, how does Ext4 do disk checks so fast? Is there some huge breakthrough in doing this after NTFS came out (~10 years ago)? Note: The NTFS disk is ~300 GB and the Ext4 disk is ~500 GB. Both are about half full.

  Read the article

• Laptop white screen on power-up. Still displays via HDMI output

  - by Inno

  my wife's laptop recently started displaying a white screen. It doesn't show post or anything, just a white screen when it's powered on. However, it works normally with HDMI output to our television. I took it apart and fiddled with both ends of the display cable, but I either didn't fiddle correctly or that's just not the problem. I also noticed that the screen won't turn off anymore when the laptop is closed. Is there a name for the mechanism that controls this function, so I can try and locate it? My guesses are that the problem lies with the screen itself or the display cable, but I'm curious if there's anything else I might be overlooking. Also of note is that the left hinge is partially broken. The corner of the plastic computer case broke off, so the hinge is exposed and doesn't stay in place. I've tried holding it in place, wiggling it around, tapping various parts of the computer, but the white screen remains.

  Read the article

• Windows 7 freezes on boot screen

  - by this is a dead end

  There was some update that required me to restart my computer, so I did. when it restarted, it stays at the Windows boot screen forever, the screen that says "Starting Windows" and has that Windows logo in the middle. I've tried the start up repair program that shows up when I click F8 when the computer starts. And tried system restore but, it says it has restored windows successfully but it still freezes on the boot screen when I reboot it. When I try starting it in safe mode, it gets to the blue Windows background, the one with the logon screen, then says "Failure configuring Windows updates. Reverting Changes. Do not turn off." Then after a while it reboot by itself. Just noticed, the logo animation on the boot screen is still animated. So it's not completely frozen.

  Read the article

• Do I need a Gigabit router with a 24MB/s down and 7MB/s upload speed cable modem?

  - by djangofan

  Do I need a Gigabit port capable wireless router with a 24MB/s down and 7MB/s upload speed cable modem? Does anyone know how to calculate this? FYI, I wont be using the wireless connection from my main computer system. My computer will connect via a hard wire into the router (of the wireless variety), which in turn is connected to the cable modem. My research suggests that the 100 MB/s port can easily handle it. Is that true?

  Read the article

• Crap, hard disk failure. Can I recover my "move"d folders?

  - by Doug

  I am in the process of moving all my files from an old laptop to new one. I just moved 11gb of data from my old laptop to a hard drive (external) and then upon moving it out to the new hard drive, the hard drive is getting a CRC (Data Error (Cyclic Redundancy Check). Now I am looking for a solution to recover the files that I moved on my old laptop (not the external). I understand they they are just marked for potential overwriting to free up space. I was getting ready to test out GetDataBack, but it says to install it on a healthy windows and use the recover-needed drive as an external. However, I don't want to turn off my computer without first getting the okay since it is in a "moved" state. Please help! What can I do to recover the Moved files. I haven't touched the computer since it has been moved. What can I use to recover them?

  Read the article

• How to set the network profile of Windows 7 via group policy?

  - by Ricket

  We are deploying client computers and in testing noticed that the first time the user logs into the computer, it asks them if the location is a home, work, or public location. We are worried that some users in our workplace might misread it (or not read it at all) and click Public, thus likely denying our access to the computer and messing up security settings and such. Can we set our network to be a "Work Network" location via group policy or some other mechanism of our Windows Domain so that the user is not prompted when connected to our network? Also these are laptops, so we don't want every network they connect to be set as work network, and we have several access points (wired and three wireless) which our users often switch between so I'm not yet sure if it reprompts with each access point but I have the feeling it will, and I would like all of these to be set to the Work profile type.

  Read the article

• Solutions for cheaply replacing poorly-supported onboard ATI card with discreet graphics on desktop machine?

  - by echo-flow

  I have put Ubuntu on my mum's desktop computer. Unfortunately, the open source radeon driver does not work well with the onboard ATI graphics, and ATI's proprietary driver no longer supports the hardware at all. In order to use the ATI proprietary driver with this hardware, it is necessary to use an older version of Xorg, which is now only available in versions of Ubuntu older than 8.10. Unfortunately, the open source radeon driver seems to be causing X to lock up intermittently when my mum uses Audacity. I'm willing to accept that some hardware is not well-supported on Ubuntu, and so, because this is a desktop computer with a couple of free PCI slots, I think a better solution might simply be to plug in a new graphics card that might have better driver support, and to disable the onboard ATI card in the BIOS. The requirements for this card are that it be inexpensive and have robust (preferably open source) driver support in Ubuntu 10.04. Heavy-duty graphics processing power is not a requirement. A second-hand card on Ebay would also be fine. Can anyone make some recommendations?

  Read the article

• Mysql refusing connection: a very special connection issue

  - by k to the z

  I have my programers remoting into a web server with windows rdp. This web server is the only machine that can access another mysql server in a secure zone. When I remote into the web server from my machine I am able to connect to the mysql server through the mysql workbench on the web server. However, when I try this same procedure from another person's computer I can get into the server via rdp. I just can't connect to mysql using the workbench. I have checked and re checked the credentials and connection information. They match. I've had other people check and re check the credentials. As far as mysql permissions are concerned this user is allowed to connect from any machine. Plus I'm remoting into the same web server. The only difference seems to be which computer is remoting into the webserver. wtf?

  Read the article

• Force shutdown a pc stuck in updating via Team Viewer

  - by Martheen Cahya Paulo

  Before I left office, I shutdown my work computer, leaving it in "Please do not power off..." screen. Now, when I log on to my own computer, I saw in Team Viewer that it's on. I thought it restarted instead of shutting down, but when I connect to it, it's still stuck in the previous screen. I've tried sending Ctrl-Alt-Del, but it seems to ignore it. I could still change its resolution via Team Viewer, and the fact that it respond my connection means it's not completely stalled. Is there anyway to shutdown it via Team Viewer?

  Read the article

• RDP exits immediately after connecting to Windows Server 2008 R2

  - by carpat

  Background: I recently got a Windows cloud VPS server. I don't have much experience with server admin (I'm a programmer), and what little I do have is with linux servers. Ever since getting the server I've been having issues with RDP. I can connect about two or three times, after which point I can't connect until one of the tech guys "fixes" it (see below). When I connect, I can stay connected for hours with no problem. When the problem connecting starts, the first time I try to log in, the remote desktop window pops up, starts connecting, and then exits with "Your Remote Desktop session has ended". After that, for about 10-20 minutes if I try to connect again, the connections times out with Remote Desktop can't connect to the computer for one of these reasons: 1) Remote access on the server is not enabled 2) The remote computer is turned off 3) The remote computer is not available on the network then goes back to connecting once and immediately disconnecting. All of the updates are installed. The firewall has been correctly configured to let RDP traffic through. The remote setting is "Allow connections from computers running any version of Remote Desktop". I tried creating a second user, and when I can't connect, I can't connect to that user either. I've tried both soft and hard reboots, neither of which help. I've tried connecting from two different computers (both running Windows 7) from two different networks (work and home), and the behavior is the same. Everything else on the server continues to run fine (IIS-served http pages, Tomcat-served java pages, svn, ping). The "fix" that the tech guys supply is simply logging into the console on their end, after which point I can connnect 2 or 3 times again. The event viewer on the server has "authentication failure" (or something similar) events generated when I attempt to log in and can't. I can't get to the actual event at the moment as I'm currently in the can't connect stage, and waiting for the techs to log in. But when I searched for the event earlier this morning I couldn't find anything useful. Can anyone help?

  Read the article

• Will I be able to get programming interviews at good software companies with a non-CS degree?

  - by friend

  I'll be graduating in a year, but I'll have a degree in Economics. I'm pretty much done with my Economics coursework, and by the time next year comes around I will have devoted 1.5 years to learning CS. I will have almost finished the requirements to graduate with a degree in CS, but unfortunately my school requires a science series that would add another 6-9 months of study if I were to try and get the degree (not to mention a max unit cap). I have or will have taken: Objected Oriented Programming Discrete Math Data structures Calculus through multivariable (doubt this matters at all) Linear Algebra (same) Computer Organization Operating Systems Computational Statistics (many data mining projects in R) Parallel Programming Programming Languages Databases Algorithms Compilers Artificial Intelligence I've done well in the ones I've taken, and I hope to do well in the rest, but will that matter if I can't say to the HR people that I have a CS degree? I'd be happy to get an internship at first too, so should I just apply as if I'm an intern and not looking for fulltime, and then try and parlay that into something? Sidenote if you have time -- Is a computer networks or theory of computation class important? Would it be worth taking either of those in lieu of a class on my list? edit -- I know this isn't AskReddit or College Confidential; I know there will be some outrage at posting a question like this. I'm merely looking for insight into a situation that I've been struggling with, and I think this is the absolute best place to find an answer to this question. Thanks.

  Read the article

• virtual hosts on lighttpd can't load

  - by Jake

  Thats what I did: Added following code to lighttpd.conf $HTTP["host"] =~ "(^|\.)test\.com$" { server.document-root = "/home/test" } created /home/test Restarted Lighttpd but it doesn't load anything Google chrome Error: No data received Unable to load the webpage because the server sent no data. Here are some suggestions: Reload this webpage later. Error 324 (net::ERR_EMPTY_RESPONSE): The server closed the connection without sending any data. Firefox: The connection was reset The connection to the server was reset while the page was loading. The site could be temporarily unavailable or too busy. Try again in a few moments. If you are unable to load any pages, check your computer's network connection. If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web. can you please explain How can I fix this? Really Thanks

  Read the article

• Setting up a LAMP VM server for Development and Testing?

  - by TdotThomas

  Info: I would like to set up a VM server on my local computer which will serve pages in the exact same way as my current hosting (but only to me on my local computer). I currently pay a big web hosting company to host my website & web store and they are doing a great job, but I would like to be able to work on my Web site and its corresponding MySQL DB, HTML, and PHP code without being at risk of messing something completely up on the live servers. My current plan of action: Set up a VM webserver with Debian, MySQL, PHP, Apache. Copy web store (PHP/HTML) code to VM server. Copy my current MySQL databases from my hosting provider and install on VM server. Modify and test new features on VM server. Upload MySQL DB and HTML/PHP code back to web host's server where it should work as before but with new modifications. Questions: Now I'm pretty sure I have steps one and two down correctly but I can't for the life of me figure out how to proceed next, so here are my questions. I have my /etc/host file set up so www.MySite.test redirects to the IP address of the local VM webserver. Once I import my PHP/HTML files and MySQL file whats the best way to navigate around the fact that all of my files and DBs will reference www.MySite.com. I can export my MySQL dbs but do I also have to export my MySQL users and passwords to access those db or are those coded into my html/php code?

  Read the article

< Previous Page | 215 216 217 218 219 220 221 222 223 224 225 226  | Next Page >