Search Results

Search found 56648 results on 2266 pages for 'vaibhav tekamwww developerit com'.

Page 2190/2266 | < Previous Page | 2186 2187 2188 2189 2190 2191 2192 2193 2194 2195 2196 2197  | Next Page >

  • More Fun With Math

    - by PointsToShare
    More Fun with Math   The runaway student – three different ways of solving one problem Here is a problem I read in a Russian site: A student is running away. He is moving at 1 mph. Pursuing him are a lion, a tiger and his math teacher. The lion is 40 miles behind and moving at 6 mph. The tiger is 28 miles behind and moving at 4 mph. His math teacher is 30 miles behind and moving at 5 mph. Who will catch him first? Analysis Obviously we have a set of three problems. They are all basically the same, but the details are different. The problems are of the same class. Here is a little excursion into computer science. One of the things we strive to do is to create solutions for classes of problems rather than individual problems. In your daily routine, you call it re-usability. Not all classes of problems have such solutions. If a class has a general (re-usable) solution, it is called computable. Otherwise it is unsolvable. Within unsolvable classes, we may still solve individual (some but not all) problems, albeit with different approaches to each. Luckily the vast majority of our daily problems are computable, and the 3 problems of our runaway student belong to a computable class. So, let’s solve for the catch-up time by the math teacher, after all she is the most frightening. She might even make the poor runaway solve this very problem – perish the thought! Method 1 – numerical analysis. At 30 miles and 5 mph, it’ll take her 6 hours to come to where the student was to begin with. But by then the student has advanced by 6 miles. 6 miles require 6/5 hours, but by then the student advanced by another 6/5 of a mile as well. And so on and so forth. So what are we to do? One way is to write code and iterate it until we have solved it. But this is an infinite process so we’ll end up with an infinite loop. So what to do? We’ll use the principles of numerical analysis. Any calculator – your computer included – has a limited number of digits. A double floating point number is good for about 14 digits. Nothing can be computed at a greater accuracy than that. This means that we will not iterate ad infinidum, but rather to the point where 2 consecutive iterations yield the same result. When we do financial computations, we don’t even have to go that far. We stop at the 10th of a penny.  It behooves us here to stop at a 10th of a second (100 milliseconds) and this will how we will avoid an infinite loop. Interestingly this alludes to the Zeno paradoxes of motion – in particular “Achilles and the Tortoise”. Zeno says exactly the same. To catch the tortoise, Achilles must always first come to where the tortoise was, but the tortoise keeps moving – hence Achilles will never catch the tortoise and our math teacher (or lion, or tiger) will never catch the student, or the policeman the thief. Here is my resolution to the paradox. The distance and time in each step are smaller and smaller, so the student will be caught. The only thing that is infinite is the iterative solution. The race is a convergent geometric process so the steps are diminishing, but each step in the solution takes the same amount of effort and time so with an infinite number of steps, we’ll spend an eternity solving it.  This BTW is an original thought that I have never seen before. But I digress. Let’s simply write the code to solve the problem. To make sure that it runs everywhere, I’ll do it in JavaScript. function LongCatchUpTime(D, PV, FV) // D is Distance; PV is Pursuers Velocity; FV is Fugitive’ Velocity {     var t = 0;     var T = 0;     var d = parseFloat(D);     var pv = parseFloat (PV);     var fv = parseFloat (FV);     t = d / pv;     while (t > 0.000001) //a 10th of a second is 1/36,000 of an hour, I used 1/100,000     {         T = T + t;         d = t * fv;         t = d / pv;     }     return T;     } By and large, the higher the Pursuer’s velocity relative to the fugitive, the faster the calculation. Solving this with the 10th of a second limit yields: 7.499999232000001 Method 2 – Geometric Series. Each step in the iteration above is smaller than the next. As you saw, we stopped iterating when the last step was small enough, small enough not to really matter.  When we have a sequence of numbers in which the ratio of each number to its predecessor is fixed we call the sequence geometric. When we are looking at the sum of sequence, we call the sequence of sums series.  Now let’s look at our student and teacher. The teacher runs 5 times faster than the student, so with each iteration the distance between them shrinks to a fifth of what it was before. This is a fixed ratio so we deal with a geometric series.  We normally designate this ratio as q and when q is less than 1 (0 < q < 1) the sum of  + … +  is  – 1) / (q – 1). When q is less than 1, it is easier to use ) / (1 - q). Now, the steps are 6 hours then 6/5 hours then 6/5*5 and so on, so q = 1/5. And the whole series is multiplied by 6. Also because q is less than 1 , 1/  diminishes to 0. So the sum is just  / (1 - q). or 1/ (1 – 1/5) = 1 / (4/5) = 5/4. This times 6 yields 7.5 hours. We can now continue with some algebra and take it back to a simpler formula. This is arduous and I am not going to do it here. Instead let’s do some simpler algebra. Method 3 – Simple Algebra. If the time to capture the fugitive is T and the fugitive travels at 1 mph, then by the time the pursuer catches him he travelled additional T miles. Time is distance divided by speed, so…. (D + T)/V = T  thus D + T = VT  and D = VT – T = (V – 1)T  and T = D/(V – 1) This “strangely” coincides with the solution we just got from the geometric sequence. This is simpler ad faster. Here is the corresponding code. function ShortCatchUpTime(D, PV, FV) {     var d = parseFloat(D);     var pv = parseFloat (PV);     var fv = parseFloat (FV);     return d / (pv - fv); } The code above, for both the iterative solution and the algebraic solution are actually for a larger class of problems.  In our original problem the student’s velocity (speed) is 1 mph. In the code it may be anything as long as it is less than the pursuer’s velocity. As long as PV > FV, the pursuer will catch up. Here is the really general formula: T = D / (PV – FV) Finally, let’s run the program for each of the pursuers.  It could not be worse. I know he’d rather be eaten alive than suffering through yet another math lesson. See the code run? Select  “Catch Up Time” in www.mgsltns.com/games.htm The host is running on Unix, so the link is case sensitive. That’s All Folks

    Read the article

  • How to use Azure storage for uploading and displaying pictures.

    - by Magnus Karlsson
    Basic set up of Azure storage for local development and production. This is a somewhat completion of the following guide from http://www.windowsazure.com/en-us/develop/net/how-to-guides/blob-storage/ that also involves a practical example that I believe is commonly used, i.e. upload and present an image from a user.   First we set up for local storage and then we configure for them to work on a web role. Steps: 1. Configure connection string locally. 2. Configure model, controllers and razor views.   1. Setup connectionsstring 1.1 Right click your web role and choose “Properties”. 1.2 Click Settings. 1.3 Add setting. 1.4 Name your setting. This will be the name of the connectionstring. 1.5 Click the ellipsis to the right. (the ellipsis appear when you mark the area. 1.6 The following window appears- Select “Windows Azure storage emulator” and click ok.   Now we have a connection string to use. To be able to use it we need to make sure we have windows azure tools for storage. 2.1 Click Tools –> Library Package manager –> Manage Nuget packages for solution. 2.2 This is what it looks like after it has been added.   Now on to what the code should look like. 3.1 First we need a view which collects images to upload. Here Index.cshtml. 1: @model List<string> 2:  3: @{ 4: ViewBag.Title = "Index"; 5: } 6:  7: <h2>Index</h2> 8: <form action="@Url.Action("Upload")" method="post" enctype="multipart/form-data"> 9:  10: <label for="file">Filename:</label> 11: <input type="file" name="file" id="file1" /> 12: <br /> 13: <label for="file">Filename:</label> 14: <input type="file" name="file" id="file2" /> 15: <br /> 16: <label for="file">Filename:</label> 17: <input type="file" name="file" id="file3" /> 18: <br /> 19: <label for="file">Filename:</label> 20: <input type="file" name="file" id="file4" /> 21: <br /> 22: <input type="submit" value="Submit" /> 23: 24: </form> 25:  26: @foreach (var item in Model) { 27:  28: <img src="@item" alt="Alternate text"/> 29: } 3.2 We need a controller to receive the post. Notice the “containername” string I send to the blobhandler. I use this as a folder for the pictures for each user. If this is not a requirement you could just call it container or anything with small characters directly when creating the container. 1: public ActionResult Upload(IEnumerable<HttpPostedFileBase> file) 2: { 3: BlobHandler bh = new BlobHandler("containername"); 4: bh.Upload(file); 5: var blobUris=bh.GetBlobs(); 6: 7: return RedirectToAction("Index",blobUris); 8: } 3.3 The handler model. I’ll let the comments speak for themselves. 1: public class BlobHandler 2: { 3: // Retrieve storage account from connection string. 4: CloudStorageAccount storageAccount = CloudStorageAccount.Parse( 5: CloudConfigurationManager.GetSetting("StorageConnectionString")); 6: 7: private string imageDirecoryUrl; 8: 9: /// <summary> 10: /// Receives the users Id for where the pictures are and creates 11: /// a blob storage with that name if it does not exist. 12: /// </summary> 13: /// <param name="imageDirecoryUrl"></param> 14: public BlobHandler(string imageDirecoryUrl) 15: { 16: this.imageDirecoryUrl = imageDirecoryUrl; 17: // Create the blob client. 18: CloudBlobClient blobClient = storageAccount.CreateCloudBlobClient(); 19: 20: // Retrieve a reference to a container. 21: CloudBlobContainer container = blobClient.GetContainerReference(imageDirecoryUrl); 22: 23: // Create the container if it doesn't already exist. 24: container.CreateIfNotExists(); 25: 26: //Make available to everyone 27: container.SetPermissions( 28: new BlobContainerPermissions 29: { 30: PublicAccess = BlobContainerPublicAccessType.Blob 31: }); 32: } 33: 34: public void Upload(IEnumerable<HttpPostedFileBase> file) 35: { 36: // Create the blob client. 37: CloudBlobClient blobClient = storageAccount.CreateCloudBlobClient(); 38: 39: // Retrieve a reference to a container. 40: CloudBlobContainer container = blobClient.GetContainerReference(imageDirecoryUrl); 41: 42: if (file != null) 43: { 44: foreach (var f in file) 45: { 46: if (f != null) 47: { 48: CloudBlockBlob blockBlob = container.GetBlockBlobReference(f.FileName); 49: blockBlob.UploadFromStream(f.InputStream); 50: } 51: } 52: } 53: } 54: 55: public List<string> GetBlobs() 56: { 57: // Create the blob client. 58: CloudBlobClient blobClient = storageAccount.CreateCloudBlobClient(); 59: 60: // Retrieve reference to a previously created container. 61: CloudBlobContainer container = blobClient.GetContainerReference(imageDirecoryUrl); 62: 63: List<string> blobs = new List<string>(); 64: 65: // Loop over blobs within the container and output the URI to each of them 66: foreach (var blobItem in container.ListBlobs()) 67: blobs.Add(blobItem.Uri.ToString()); 68: 69: return blobs; 70: } 71: } 3.4 So, when the files have been uploaded we will get them to present them to out user in the index page. Pretty straight forward. In this example we only present the image by sending the Uri’s to the view. A better way would be to save them up in a view model containing URI, metadata, alternate text, and other relevant information but for this example this is all we need.   4. Now press F5 in your solution to try it out. You can see the storage emulator UI here:     4.1 If you get any exceptions or errors I suggest to first check if the service Is running correctly. I had problem with this and they seemed related to the installation and a reboot fixed my problems.     5. Set up for Cloud storage. To do this we need to add configuration for cloud just as we did for local in step one. 5.1 We need our keys to do this. Go to the windows Azure menagement portal, select storage icon to the right and click “Manage keys”. (Image from a different blog post though).   5.2 Do as in step 1.but replace step 1.6 with: 1.6 Choose “Manually entered credentials”. Enter your account name. 1.7 Paste your Account Key from step 5.1. and click ok.   5.3. Save, publish and run! Please feel free to ask any questions using the comments form at the bottom of this page. I will get back to you to help you solve any questions. Our consultancy agency also provides services in the Nordic regions if you would like any further support.

    Read the article

  • UIImagePickerController Memory Leak

    - by Watson
    I am seeing a huge memory leak when using UIImagePickerController in my iPhone app. I am using standard code from the apple documents to implement the control: UIImagePickerController* imagePickerController = [[UIImagePickerController alloc] init]; imagePickerController.delegate = self; if ([UIImagePickerController isSourceTypeAvailable:UIImagePickerControllerSourceTypeCamera]) { switch (buttonIndex) { case 0: imagePickerController.sourceType = UIImagePickerControllerSourceTypeCamera; [self presentModalViewController:imagePickerController animated:YES]; break; case 1: imagePickerController.sourceType = UIImagePickerControllerSourceTypePhotoLibrary; [self presentModalViewController:imagePickerController animated:YES]; break; default: break; } } And for the cancel: -(void) imagePickerControllerDidCancel:(UIImagePickerController *)picker { [[picker parentViewController] dismissModalViewControllerAnimated: YES]; [picker release]; } The didFinishPickingMediaWithInfo callback is just as stanard, although I do not even have to pick anything to cause the leak. Here is what I see in instruments when all I do is open the UIImagePickerController, pick photo library, and press cancel, repeatedly. As you can see the memory keeps growing, and eventually this causes my iPhone app to slow down tremendously. As you can see I opened the image picker 24 times, and each time it malloc'd 128kb which was never released. Basically 3mb out of my total 6mb is never released. This memory stays leaked no matter what I do. Even after navigating away from the current controller, is remains the same. I have also implemented the picker control as a singleton with the same results. Here is what I see when I drill down into those two lines: Any help here would be greatly appreciated! Again, I do not even have to choose an image. All I do is present the controller, and press cancel. Update 1 I downloaded and ran apple's example of using the UIIMagePickerController and I see the same leak happening there when running instruments (both in simulator and on the phone). http://developer.apple.com/library/ios/#samplecode/PhotoPicker/Introduction/Intro.html%23//apple_ref/doc/uid/DTS40010196 All you have to do is hit the photo library button and hit cancel over and over, you'll see the memory keep growing. Any ideas? Update 2 I only see this problem when viewing the photo library. I can choose take photo, and open and close that one over and over, without a leak.

    Read the article

  • Activity Indicator not displaying based on whether the UIWebView is loading or not...

    - by Jack W-H
    Hi folks Sorry if this is an easy one. Basically, here is my code: MainViewController.h: // // MainViewController.h // Site // // Created by Jack Webb-Heller on 19/03/2010. // Copyright __MyCompanyName__ 2010. All rights reserved. // #import "FlipsideViewController.h" @interface MainViewController : UIViewController <UIWebViewDelegate, FlipsideViewControllerDelegate> { IBOutlet UIWebView *webView; IBOutlet UIActivityIndicatorView *spinner; } - (IBAction)showInfo; @property(nonatomic,retain) UIWebView *webView; @property(nonatomic,retain) UIActivityIndicatorView *spinner; @end MainViewController.m: // // MainViewController.m // Site // // Created by Jack Webb-Heller on 19/03/2010. // Copyright __MyCompanyName__ 2010. All rights reserved. // #import "MainViewController.h" #import "MainView.h" @implementation MainViewController @synthesize webView; @synthesize spinner; - (id)initWithNibName:(NSString *)nibNameOrNil bundle:(NSBundle *)nibBundleOrNil { if (self = [super initWithNibName:nibNameOrNil bundle:nibBundleOrNil]) { // Custom initialization } return self; } // Implement viewDidLoad to do additional setup after loading the view, typically from a nib. - (void)viewDidLoad { NSURL *siteURL; NSString *siteURLString; siteURLString=[[NSString alloc] initWithString:@"http://www.site.com"]; siteURL=[[NSURL alloc] initWithString:siteURLString]; [webView loadRequest:[NSURLRequest requestWithURL:siteURL]]; [siteURL release]; [siteURLString release]; [super viewDidLoad]; } - (void)flipsideViewControllerDidFinish:(FlipsideViewController *)controller { [self dismissModalViewControllerAnimated:YES]; } - (void)webViewDidFinishLoad:(UIWebView *)webView { [spinner stopAnimating]; spinner.hidden=FALSE; NSLog(@"viewDidFinishLoad went through nicely"); } - (void)webViewDidStartLoad:(UIWebView *)webView { [spinner startAnimating]; spinner.hidden=FALSE; NSLog(@"viewDidStartLoad seems to be working"); } - (IBAction)showInfo { FlipsideViewController *controller = [[FlipsideViewController alloc] initWithNibName:@"FlipsideView" bundle:nil]; controller.delegate = self; controller.modalTransitionStyle = UIModalTransitionStyleFlipHorizontal; [self presentModalViewController:controller animated:YES]; [controller release]; } - (void)didReceiveMemoryWarning { // Releases the view if it doesn't have a superview. [super didReceiveMemoryWarning]; // Release any cached data, images, etc that aren't in use. } - (void)viewDidUnload { // Release any retained subviews of the main view. // e.g. self.myOutlet = nil; } - (void)dealloc { [spinner release]; [webView release]; [super dealloc]; } @end Unfortunately nothing is ever written to my log, and for some reason the Activity Indicator never seems to appear. What's going wrong here? Thanks folks Jack

    Read the article

  • using php's libcurl to register user and upload file to server

    - by tunpishuang
    here is a site http://www.lyrkjsw.gov.cn that can let the registered user to upload file (e.g. images or office files) to the site. i want to register user and upload image to this site using libcurl binding with php. only registered user can upload image. so i use cookiejar stored in c:\cookie.txt after register and use c:\cookie.txt in uploadImg() function . register user is valid but failed to upload image , can anybody know is there any mistake of my code: <? /* options */ //the list url $expUrl='http://www.lyrkjsw.gov.cn/hbcms/user/list_resource.php'; //the user info to be registered $regUser='jiong'; $regPass='jiong'; $regMail='jiong@jiong.com'; $regUrl=str_replace('list_resource.php','register.php',$expUrl); // options for image upload $fileDir='@D:\img\b.jpg'; $fileTitle='aaaaaaaaaaaaa'; $fileDesc='aaaaaaaaaaaaadesc'; $uploadImgUrl=str_replace('list_resource.php','add_resource.php',$expUrl); /* register function */ function reg($regurl,$u,$p,$m) { $ch = curl_init(); $options=array( CURLOPT_URL=>$regurl, CURLOPT_RETURNTRANSFER=>true, CURLOPT_POST=>true, CURLOPT_POSTFIELDS=>'mod=register_now&next_url=index.php&addon_app=&referrer_id=&login_name='.$u.'&login_pass='.$p.'&confirm_login_pass='.$p.'&login_email='.$m.'&nickname=&gender=0&qq=&mobile=&telephone=&true_name=&website_name=&website_url=&my_question=&my_answer=', CURLOPT_COOKIESESSION=>true, CURLOPT_HEADER=>true, CURLOPT_COOKIEJAR=>'c:\cookie.txt' ); curl_setopt_array($ch,$options); $data = curl_exec($ch); if(strpos($data,'??')){ printf("register ok :)\n"); curl_close($ch); return true; }else{ printf("register failed:(\n"); curl_close($ch); return false; } } /* image uploading function */ function uploadImg($uploadimgurl,$filedir,$filetitle,$filedesc) { $ch = curl_init(); $options=array( CURLOPT_COOKIEFILE=>'c:\cookie.txt', CURLOPT_URL=>$uploadimgurl, CURLOPT_RETURNTRANSFER=>1, CURLOPT_POST=>1, CURLOPT_POSTFIELDS=>" 'MAX_FILE_SIZE'='33554432'& 'preview_area_id'='upload_file'& 'editor_area_id'='body'& 'js_function'=''& 'resource_id'=''& 'show_top_part'='no'& 'file_1'=$filedir& 'file_title_1'=$filetitle& 'file_desc_1'=$filedesc " ); curl_setopt_array($ch,$options); $data = curl_exec($ch); if(strpos($data,'??')){ printf("upload ok :)\n"); }else{ printf("upload failed :(\n"); } curl_close($ch); } if(reg($regUrl,$regUser,$regPass,$regMail) != false) { uploadImg($uploadImgUrl,$fileDir,$fileTitle,$fileDesc); } http://www.lyrkjsw.gov.cn/hbcms/user/list_resource.php (list file page) http://www.lyrkjsw.gov.cn/hbcms/user/register.php (register page) http://www.lyrkjsw.gov.cn/hbcms/user/add_resource.php (image uploading page)

    Read the article

  • Looking for efficient scaling patterns for Silverlight application with distributed text-file data s

    - by Edward Tanguay
    I'm designing a Silverlight software solution for students and teachers to record flashcards, e.g. words and phrases that students find while reading and errors that teachers notice while teaching. Requirements are: each person publishes his own flashcards in a file on a web server, e.g. http://:www.mywebserver.com/flashcards.txt other people subscribe to that person's flashcards by using a Silverlight flashcard reader that I have developed and entering the URLs of flashcard files they want to subscribe to, URLs and imported flashcards being saved in IsolatedStorage the flashcards.txt file has the following simple format: title, then blocks of question/answers: Jim Smith's flashcards from English class 53-222, winter semester 2009 ==fla Das kann nicht sein. That can't be. ==fla Es sei denn, er kommt nicht. Unless he doesn't come. The user then makes public the URL to his flashcard file and other readers begin reading in his flashcards. In order to lower the bar for non-technical users to contribute, it will even be possible for them to save this text in a Google Document, which they publish and distribute the URL. The flashcard readers will then recognize it is a google document and perform the necessary screen scraping to get at the raw text. I have two technical questions about this approach: What is a best way to plan now for scalability issues: e.g. if your reader is subscribed to 10 flashcard files that are each 200K, it will have to download 2MB of text just to find out if any new flashcards are available. Or can I somehow accurately and consistently get at the last update date/time of text files on servers and published google docs? Each reader will have the ability to allow the person to test himself on imported flashcards and add meta information to them, e.g. categorize them, edit them, etc. This information will be stored in IsolatedStorage along with the important flashcards themselves. What is a good pattern to allow these readers to share and synchronize this meta data, e.g. so when you are looking at a flashcard you can see that 5 other people have made corrections to it. The best solution I can think of now is that the Silverlight readers will have to republish their data to a central database, but then there is the problem of uniquely identifying each flashcard, the best approach seems to be URL + position-in-file, or even better URL + original text of both question and answer fields, but both of these have their obvious drawbacks. The main requirement is that the bar for participation is kept as low as possible, i.e. type text in a google document, publish it, distribute the URL, and you're publishing within the flashcard community. So I want to come up with the most efficient technical solutions in order to compensate for the lack of database, lack of unique ids, etc. For those who have designed or developed similar non-traditional, distributed database projects like this, what advice, experience or best-practice tips you can share on the above two points?

    Read the article

  • How to detect if Asp.Net form is valid

    - by Hasan Gürsoy
    Hi, I have a form which is in an updatePanel and I have a span with hidden loading image, which I want to show when user clicks to submit button but I first need to check if page is valid on client side. Also I'm making loading span visible with jQuery. Here is my code: <html> <head> <script src="http://ajax.googleapis.com/ajax/libs/jquery/1.4.2/jquery.min.js" type="text/javascript"></script> <script type="text/javascript"> function showLoading() { $('#loader').show(); } </script> </head> <body> <asp:ScriptManager ID="smMain" runat="server"></asp:ScriptManager> <asp:UpdatePanel ID="upForm" runat="server"> <ContentTemplate> <asp:MultiView ID="mvContact" runat="server" ActiveViewIndex="0"> <asp:View ID="vDefault" runat="server"> <asp:TextBox ID="tEMail" runat="server" CssClass="input" /> <asp:RequiredFieldValidator ID="rfvEMail" runat="server" ControlToValidate="tEMail" ErrorMessage="* required" Display="Dynamic" /> <asp:RegularExpressionValidator ID="revEMail" runat="server" ControlToValidate="tEMail" ErrorMessage="* invalid" Display="Dynamic" ValidationExpression="\w+([-+.']\w+)*@\w+([-.]\w+)*\.\w+([-.]\w+)*" /> <asp:ImageButton ID="btnSubmit" runat="server" ImageUrl="~/Assets/Images/btnSubmit.png" ToolTip="Submit Form" style="margin:5px 5px 0 -5px" onclick="btnSubmit_Click" OnClientClick="showLoading();" /> <span id="loader"><img src="Assets/Images/loader.gif" title="Sending..." /></span> </asp:View> <asp:View ID="vResult" runat="server"> <div class="result"> <span id="lResult" runat="server">Your message is sent</span> </div> </asp:View> </asp:MultiView> </ContentTemplate> </asp:UpdatePanel> </body></html>

    Read the article

  • Non RBAC User Roles and Permissions System: a role with properties

    - by micha12
    We are currently designing a User Roles and Permissions System in our web application (ASP.NET), and it seems that we have several cases that do no fit within the classical Role-Based Access Control (RBAC). I will post several questions, each devoted to a particular case. This is my second question (the first question is here: http://stackoverflow.com/questions/2839797/non-rbac-user-roles-and-permissions-system-checking-the-users-city). We have the following case: we need to implement a Manager role in our web application. However, a Manager can belong to one or several companies (within a big group of companies for which we are creating this web app). Say, there can be “Manager of companies A and B”, “Manager of company C”, etc. Depending on the companies that the Manager belongs, he has access to certain operations: for example, he can communicate with clients only of those companies that he belongs to. That is, “Manager of companies A and B” can only have contacts with clients of companies A and B, and not with those of company C. He can also view clients’ details pages of companies A and B and not of C, etc. It seems that this case falls within the RBAC. However, this is not really the case. We will need to create a ManagerRole class that will have a Companies property – that is, this will not be just a role as a collection of permissions (like in the classical RBAC), but a role with properties! This was just one example of a role having properties. There will be others: for example, an Administrator role that will also belong to a number of companies and will also have other custom properties. This means that we will a hierarchy or roles classes: class Role – base class class ManagerRole : Role List Companies class AdministratorRole : Role List Companies Other properties We investigated pure RBAC and its implementation in several systems, and found no systems featuring a hierarchy or roles, each having custom properties. In RBAC, roles are just collections of permissions. We could model our cases using permission with properties, like ManagerPermission, AdministratorPermission, but this has a lot of drawbacks, the main being that we will not be able to assign a role like “Manager of Companies A and B” to a user directly, but will have to create a role containing a ManagerPermission for companies A and B… Moreover, a "Manager" seems to be rather a "role" (position in the company) rather than a "permission" from the linguistic point of view. Would be grateful for any ideas on this subject, as well as any experience in this field! Thank you.

    Read the article

  • Need to set cursor position to the end of a contentEditable div, issue with selection and range obje

    - by DavidR
    I'm forgetting about cross-browser compatibility for the moment, I just want this to work. What I'm doing is trying to modify a script (and you probably don't need to know this) located at typegreek.com The basic script is found here. Basically what it does is when you type in characters, it converts the character your are typing into greek characters and prints it onto the screen. What I'm trying to do is to get it to work on contentEditable div's (It only works for Textareas) My issue is with this one function: The user types a key, it get's converted to a greek key, and goes to a function, it gets sorted through some if's, and where it ends up is where I can add div support. Here is what I have so far, myField is the div, myValue is the greek character. //Get selection object... var userSelection if (window.getSelection) {userSelection = window.getSelection();} else if (document.selection) {userSelection = document.selection.createRange();} //Now get the cursor position information... var startPos = userSelection.anchorOffset; var endPos = userSelection.focusOffset; var cursorPos = endPos; //Needed later when reinserting the cursor... var rangeObj = userSelection.getRangeAt(0) var container = rangeObj.startContainer //Now take the content from pos 0 -> cursor, add in myValue, then insert everything after myValue to the end of the line. myField.textContent = myField.textContent.substring(0, startPos) + myValue + myField.textContent.substring(endPos, myField.textContent.length); //Now the issue is, this updates the string, and returns the cursor to the beginning of the div. //so that at the next keypress, the character is inserted into the beginning of the div. //So we need to reinsert the cursor where it was. //Re-evaluate the cursor position, taking into account the added character. var cursorPos = endPos + myValue.length; //Set the caracter position. rangeObj.setStart(container,cursorPos) Now, this works only as long as I don't type more than the size of the original text. Say I had 30 characters in the div before hand. If I type more than that 30, it adds character 31, but places the cursor back at 30. I can type character 32 at pos.31, then character 33 at pos.32, but if I try to put character 34 in, it adds the character, and sets the cursor back at 32. The issue is that the function for adding the new character screws up if cursorPos is greater than what is defined in the range. Any ideas?

    Read the article

  • printing multi dimentional array

    - by Honey
    i have this multi dimentional array that i want to print into a table having each record/item go into its own row but it goes column wise. this is the output that im getting: http://mypetshopping.com/product.php ps: the value of $product will by dynamic based on what product is being viewed. <?php session_start(); ?> <table> <thead> <tr> <th>Name</th> <th>Hash</th> <th>Quantity</th> <th>Size</th> <th>Color</th> </tr> </thead> <tbody> <?php function addCart($product, $quantity, $size,$color) { $hash = md5($product); $_SESSION['cart'][$product]['name'] = $product; $_SESSION['cart'][$product]['hash'] = $hash; $_SESSION['cart'][$product]['quantity'] = $quantity; $_SESSION['cart'][$product]['size'] = $size; $_SESSION['cart'][$product]['color'] = $color; } addCart('Red Dress',1,'XL','red'); addCart('Blue Dress',1,'XL','blue'); addCart('Slippers',1,'XL','orange'); addCart('Green Hat',1,'XXXL','green'); $cart = $_SESSION['cart']; foreach($cart as $product => $array) { foreach($array as $key => $value) { ?> <tr> <td><?=$value;?></td> <td><?=$value;?></td> <td><?=$value;?></td> <td><?=$value;?></td> <td><?=$value;?></td> </tr> <?php } } ?>

    Read the article

  • extract data from Plist to array and dictionary

    - by Boaz
    Hi I made a plist that looks like that: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList 1.0.dtd"> <plist version="1.0"> <array> <array> <dict> <key>Company</key> <string>xxx</string> <key>Title</key> <string>VP Marketing</string> <key>Name</key> <string>Alon ddfr</string> </dict> <dict> <key>Name</key> <string>Adam Ben Shushan</string> <key>Title</key> <string>CEO</string> <key>Company</key> <string>Shushan ltd.</string> </dict> </array> <array> <dict> <key>Company</key> <string>xxx</string> <key>Title</key> <string>CTO</string> <key>Name</key> <string>Boaz frf</string> </dict> </array> </array> </plist> Now I want to extract the data like that (all the 'A' for key "Name" to one section and all the 'B' "Name" to other one): NSString *plistpath = [[NSBundle mainBundle] pathForResource:@"PeopleData" ofType:@"plist"]; NSMutableArray *attendees = [[NSMutableArray alloc] initWithContentsOfFile:plistpath]; listOfPeople = [[NSMutableArray alloc] init];//Add items NSDictionary *indexADict = [NSDictionary dictionaryWithObject:[[attendees objectAtIndex:0] objectForKey:@"Name"] forKey:@"Profiles"]; NSDictionary *indexBDict = [NSDictionary dictionaryWithObject:[[attendees objectAtIndex:1] objectForKey:@"Name"] forKey:@"Profiles"]; [listOfPeople addObject:indexADict]; [listOfPeople addObject:indexBDict]; This in order to view them in sectioned tableView. I know that the problem is here: NSDictionary *indexADict = [NSDictionary dictionaryWithObject:[[attendees objectAtIndex:0] objectForKey:@"Name"] forKey:@"Profiles"]; But I just can't figure how to do it right. Thanks.

    Read the article

  • Android table width queries

    - by user1653285
    I have a table layout (code below), but I have am having a bit of a problem with the width of the cells. The picture below shows the problem. There should be a white border on the right hand side of the screen. I also want the text "Auditorium" not to wrap onto a new line (I would prefer that "13th -" get put onto the new line instead, I don't want to put \n in there because then it would mean it goes onto a new line at that point on bigger screens/landscape view). How can I fix those two problems? <?xml version="1.0" encoding="utf-8"?> <ScrollView xmlns:android="http://schemas.android.com/apk/res/android" android:layout_width="fill_parent" android:layout_height="fill_parent" android:background="#013567" > <TableLayout android:layout_width="match_parent" android:layout_height="wrap_content" android:shrinkColumns="*" android:stretchColumns="*" > <TableRow android:layout_width="match_parent" android:layout_height="wrap_content" > <TextView android:layout_width="match_parent" android:layout_height="match_parent" android:background="@drawable/textlines" android:gravity="center" android:text="@string/meeting_5" android:textColor="#fff" > </TextView> <TextView android:layout_width="match_parent" android:layout_height="match_parent" android:background="@drawable/textlines" android:gravity="center" android:text="@string/meeting_5_date" android:textColor="#fff" > </TextView> <TextView android:layout_width="match_parent" android:layout_height="match_parent" android:background="@drawable/textlines" android:gravity="center" android:text="@string/meeting_5_location" android:textColor="#fff" > </TextView> </TableRow> <TableRow android:layout_width="match_parent" android:layout_height="wrap_content" > <TextView android:layout_width="match_parent" android:layout_height="match_parent" android:background="@drawable/textlines" android:gravity="center" android:text="@string/AGM" android:textColor="#fff" > </TextView> <TextView android:layout_width="match_parent" android:layout_height="match_parent" android:background="@drawable/textlines" android:gravity="center" android:text="@string/AGM_date" android:textColor="#fff" > </TextView> <TextView android:layout_width="match_parent" android:layout_height="match_parent" android:background="@drawable/textlines" android:gravity="center" android:text="@string/AGM_location" android:textColor="#fff" > </TextView> </TableRow> </TableLayout>

    Read the article

  • Setting up Django on an internal server (os.environ() not working as expected?)

    - by monkut
    I'm trying to setup Django on an internal company server. (No external connection to the Internet.) Looking over the server setup documentation it appears that the "Running Django on a shared-hosting provider with Apache" method seems to be the most-likely to work in this situation. Here's the server information: Can't install mod_python no root access Server is SunOs 5.6 Python 2.5 Apache/2.0.46 I've installed Django (and flup) using the --prefix option (reading again I probably should've used --home, but at the moment it doesn't seem to matter) I've added the .htaccess file and mysite.fcgi file to my root web directory as mentioned here. When I run the mysite.fcgi script from the server I get my expected output (the correct site HTML output). But, it won't when trying to access it from a browser. It seems that it may be a problem with the PYTHONPATH setting since I'm using the prefix option. I've noticed that if I run mysite.fcgi from the command-line without setting the PYTHONPATH enviornment variable it throws the following error: prompt$ python2.5 mysite.fcgi ERROR: No module named flup Unable to load the flup package. In order to run django as a FastCGI application, you will need to get flup from http://www.saddi.com/software/flup/ If you've already installed flup, then make sure you have it in your PYTHONPATH. I've added sys.path.append(prefixpath) and os.environ['PYTHONPATH'] = prefixpath to mysite.fcgi, but if I set the enviornment variable to be empty on the command-line then run mysite.fcgi, I still get the above error. Here are some command-line results: >>> os.environ['PYTHONPATH'] = 'Null' >>> >>> os.system('echo $PYTHONPATH') Null >>> os.environ['PYTHONPATH'] = '/prefix/path' >>> >>> os.system('echo $PYTHONPATH') /prefix/path >>> exit() prompt$ echo $PYTHONPATH Null It looks like Python is setting the variable OK, but the variable is only applicable inside of the script. Flup appears to be distributed as an .egg file, and my guess is that the egg implementation doesn't take into account variables added by os.environ['key'] = value (?) at least when installing via the --prefix option. I'm not that familiar with .pth files, but it seems that the easy-install.pth file is the one that points to flup: import sys; sys.__plen = len(sys.path) ./setuptools-0.6c6-py2.5.egg ./flup-1.0.1-py2.5.egg import sys; new=sys.path[sys.__plen:]; del sys.path[sys.__plen:]; p=getattr(sys,'__egginsert',0); sy s.path[p:p]=new; sys.__egginsert = p+len(new) It looks like it's doing something funky, anyway to edit this or add something to my code so it will find flup?

    Read the article

  • Convert a PDF to a Transparent PNG with GhostScript

    - by Jonathon Wolfe
    Hi all. I am attempting, unsuccessfully, to use Ghostscript to rasterize PDF files with a transparent background to PNG files with a transparent background. I've searched high and low for questions from others attempting the same thing and none of the posted solutions, which as far as I can tell come down to specifying -sDEVICE=pngalpha, have worked with my test files. At this point I would really appreciate any advice or tips a more experienced hand could provide. My test PDF is located here: http://www.kolossus.com/files/test.pdf It could be that the issue is with this file, but I doubt it. As far as I can tell, it has no specified background, and when I open the file with a transparency-aware app like Photoshop or Illustrator, sure enough it displays with a transparent background. However, when opened with an application like Adobe Reader the file is rendered with a white background. I believe that this has more to do with the application rendering the PDF than with the PDF itself -- apps like Adobe Reader assume you want to see what a printed document will look like and therefore always show a white canvas behind the artwork -- but I can't be sure. The gs command I'm using is: gs -dNOPAUSE -dBATCH -sDEVICE=pngalpha -r72 -sOutputFile=test.png test.pdf This produces a PNG that has transparent pixels outside of the bounding box of the artwork in the file, but all pixels that are inside the artwork's bounding box are rasterized against a white background. This is a problem for me, as my artwork has drop shadows and antialiased edges that need to be preserved in the final output, and can't just be postprocessed out with ImageMagick. A sample of my PNG output is at the same location as the pdf above, with .png at the end (stackoverflow won't let me include more than one url in my post). Interestingly, I see no effects from using the -dBackgroundColor flag, even if I set it to something non-white like -dBackgroundColor=16#ff0000. Perhaps my understanding of the syntax of this flag is wrong. Also interestingly, I see no effects from using the -dTextAlphaBits=4 -dGraphicsAlphaBits=4 flags to try to enable subpixel antialiasing. I would also appreciate any advice on how to enable subpixel antialiasing, especially on text. Finally, I'm using GPL Ghostscript 8.64 on Mac OS 10.5.7, and the rendering workflow I'm trying to get set up is to generate transparent PNG images from PDFs output by PrinceXML. I'm calling Ghostscript directly for the rasterization instead of using ImageMagick because ImageMagick delegates to Ghostscript for PDF rasterization and I should be able to control the rasterization better by calling GS directly. Thanks for your help. -Jon Wolfe

    Read the article

  • Massive Silverlight Giveaway! DevExpress , Syncfusion, Crypto Obfuscator and SL Spy!

    - by mbcrump
    Oh my, have we grown! Maybe I should change the name to Multiple Silverlight Giveaways. So far, my Silverlight giveaways have been such a success that I’m going to be able to give away more than one Silverlight product every month. Last month, we gave away 3 great products. 1) ComponentOne Silverlight Controls 2)  ComponentOne XAP Optimizer (with obfuscation) and 3) Silverlight Spy. This month, we will give away 4 great Silverlight products and have 4 different winners. This way the Silverlight community can grow with more than just one person winning all the prizes. This month we will be giving away: DevExpress Silverlight Controls – Over 50+ Silverlight Controls Syncfusion User Interface Edition - Create stunning line of business silverlight applications with a wide range of components including a high performance grid, docking manager, chart, gauge, scheduler and much more. Crypto Obfuscator – Works for all .NET including Silverlight/Windows Phone 7. Silverlight Spy – provides a license EVERY month for this giveaway. ----------------------------------------------------------------------------------------------------------------------------------------------------------- Win a FREE developer’s license of one of the products listed above! 4 winners will be announced on April 1st, 2011! To be entered into the contest do the following things: Subscribe to my feed. – Use Google Reader, email or whatever is best for you.  Leave a comment below with a valid email account (I WILL NOT share this info with anyone.) Retweet the following : I just entered to win free #Silverlight controls from @mbcrump . Register here: http://mcrump.me/fTSmB8 ! Don’t change the URL because this will allow me to track the users that Tweet this page. Don’t forget to visit each of the vendors sites because they made this possible. MichaelCrump.Net provides Silverlight Giveaways every month. You can also see the latest giveaway by bookmarking http://giveaways.michaelcrump.net . ---------------------------------------------------------------------------------------------------------------------------------------------------------- DevExpress Silverlight Controls Let’s take a quick look at some of the software that is provided in this giveaway. Before we get started with the Silverlight Controls, here is a couple of links to bookmark for the DevExpress Silverlight Controls: The Live Demos of the Silverlight Controls is located here. Great Video Tutorials of the Silverlight Controls are here. One thing that I liked about the DevExpress is how easy it was to find demos of each control. After you install the controls the following Program Group appears complete with “demos” that include full-source.   So, the first question that you may ask is, “What is included?” Here is the official list below. I wanted to show several of the controls that I think developers will use the most. The Book – Very rich animation between switching pages. Very easy to add your own images and custom text. The Menu – This is another control that just looked great. You can easily add images to the menu items with a few lines of XAML. The Window / Dialog Box – You can use this control to make a very beautiful “Wizard” to help your users navigate between pages. This is useful in setup or installation. Calculator – This would be useful for any type of Banking app. Also a first that I’ve seen from a 3rd party Control company. DatePicker – This controls feels a lot smoother than the one provided by Microsoft. It also provides the ability to “Clear” the selection. Overall the DevExpress Silverlight Controls feature a lot of quality controls that you should check out. You can go ahead and download a trial version of it right now by clicking here. If you win the contest you can simply enter your registration key and continue using the product without reinstalling. Syncfusion User Interface Edition Before we get started with the Syncfusion User Interface Edition, here is a couple of links to bookmark. The Live Demos can be found here. You can download a demo of it now at http://www.syncfusion.com/downloads/evalstart. After you install the Syncfusion, you can view the dashboard to run locally installed samples. You may also download the documentation to your local machine if needed. Since the name of the package is “User Interface Edition”, I decided to share several samples that struck me as “awesome”. Dashboard Gauges – I was very impressed with the various gauges they have included. The digital clock also looks very impressive. Diagram – The diagrams are also very easy to build. In the sample project below you can drag/drop the shapes onto the content pane. More complex lines like the Bezier lines are also easy to create using Syncfusion. Scheduling – Another strong component was the Scheduling with built-in support for Themes. Tools – If all of that wasn’t enough, it also comes with a nice pack of essential tools. Syncfusion has a nice variety of Silverlight Controls that you should check out. You can go ahead and download a trial version of it right now by clicking here. Crypto Obfuscator The following feature set is what is important to me in an Obfuscator since I am a Silverlight/WP7 Developer: And thankfully this is what you get in Crypto Obfuscator. You can download a trial version right now if you want to go ahead and play with it. Let’s spend a few moments taking a look at the application. After you have installed Crypto Obfuscator you will see the following screen: After you click on Assemblies you have the option to add your .XAP file in: I went ahead and loaded my .xap file from a Silverlight Application. At this point, you can simply save your project and hit “Obfuscate” and your done. You don’t have to mess with any of the other settings if you don’t want too. Of course, you can change the settings and add obfuscation rules, watermarks and signing if you wish.  After Obfuscation, it looks like this in .NET Reflector: I was trying to browse through methods and it actually crashed Reflector. This confirms the level of protection the obfuscator is providing. If this were a commercial application that my team built, I would have a huge smile on my face right now. Crypto Obfuscator is a great product and I hope you will spend the time learning more about it. Silverlight Spy Silverlight Spy is a runtime inspector tool that will tell you pretty much everything that is going on with the application. Basically, you give it a URL that contains a Silverlight application and you can explore the element tree, events, xaml and so much more. This has already been reviewed on MichaelCrump.net. _________________________________________________________________________________________ Thanks for reading and don’t forget to leave a comment below in order to win one of the four prizes available! Subscribe to my feed

    Read the article

  • How to get jQuery draggable elements scroll with mb.imageNavigator

    - by bulltorious
    I am using jQuery mb.imageNavigator (1.8) from http://pupunzi.open-lab.com/mb-jquery-components/mb-imagenavigator/ to implements a Risk type game adjucation system. Using the imageNavigator plugin I am able to scroll around a large game map of the world. My issue is when I declare some elements as draggable and drag them onto the map image, their location does not stay relative to where in the picture I put them. They just stay fixed on the screen no matter where I scroll. Does anyone know how to make the the draggable elements scroll with the image? Matteo posts about "you can add an additional content layer that overlay image and moves with it" and posts an example, but I can't make it work. <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> ` <head> <script type="text/jscript" src="lib/jquery/jquery-1.3.2.js"> </script> <script type="text/jscript" src="lib/jquery/jquery-ui-1.7.2.custom.min.js"> </script> <script type="text/jscript" src="lib/utilities/mbImgNav.min.js_0.js"> </script> <script type="text/jscript" src="lib/utilities/start.js"> </script> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <title>New Web Project</title> </head> <body> <div id="AdamsAshTray" style="float:right; background-color:red; z-index:999"> test test test </div> <div id="navArea"> <div imageUrl="someimage" navPosition="BR" navWidth="100" style="display:none;" class="imagesContainer"> <span class="title">zuccheriera</span> <div class="description"> <STRONG>description1</STRONG> </div> </div> </div> </body> $(document).ready(function(){ $("#navArea").imageNavigator({ areaWidth:1820, areaHeight:1000, draggerStyle: "1px dotted red", navOpacity: .8 }) $("#AdamsAshTray").draggable({ grid: [20,20] }); })`

    Read the article

  • J2EE Applications, SPARC T4, Solaris Containers, and Resource Pools

    - by user12620111
    I've obtained a substantial performance improvement on a SPARC T4-2 Server running a J2EE Application Server Cluster by deploying the cluster members into Oracle Solaris Containers and binding those containers to cores of the SPARC T4 Processor. This is not a surprising result, in fact, it is consistent with other results that are available on the Internet. See the "references", below, for some examples. Nonetheless, here is a summary of my configuration and results. (1.0) Before deploying a J2EE Application Server Cluster into a virtualized environment, many decisions need to be made. I'm not claiming that all of the decisions that I have a made will work well for every environment. In fact, I'm not even claiming that all of the decisions are the best possible for my environment. I'm only claiming that of the small sample of configurations that I've tested, this is the one that is working best for me. Here are some of the decisions that needed to be made: (1.1) Which virtualization option? There are several virtualization options and isolation levels that are available. Options include: Hard partitions:  Dynamic Domains on Sun SPARC Enterprise M-Series Servers Hypervisor based virtualization such as Oracle VM Server for SPARC (LDOMs) on SPARC T-Series Servers OS Virtualization using Oracle Solaris Containers Resource management tools in the Oracle Solaris OS to control the amount of resources an application receives, such as CPU cycles, physical memory, and network bandwidth. Oracle Solaris Containers provide the right level of isolation and flexibility for my environment. To borrow some words from my friends in marketing, "The SPARC T4 processor leverages the unique, no-cost virtualization capabilities of Oracle Solaris Zones"  (1.2) How to associate Oracle Solaris Containers with resources? There are several options available to associate containers with resources, including (a) resource pool association (b) dedicated-cpu resources and (c) capped-cpu resources. I chose to create resource pools and associate them with the containers because I wanted explicit control over the cores and virtual processors.  (1.3) Cluster Topology? Is it best to deploy (a) multiple application servers on one node, (b) one application server on multiple nodes, or (c) multiple application servers on multiple nodes? After a few quick tests, it appears that one application server per Oracle Solaris Container is a good solution. (1.4) Number of cluster members to deploy? I chose to deploy four big 64-bit application servers. I would like go back a test many 32-bit application servers, but that is left for another day. (2.0) Configuration tested. (2.1) I was using a SPARC T4-2 Server which has 2 CPU and 128 virtual processors. To understand the physical layout of the hardware on Solaris 10, I used the OpenSolaris psrinfo perl script available at http://hub.opensolaris.org/bin/download/Community+Group+performance/files/psrinfo.pl: test# ./psrinfo.pl -pv The physical processor has 8 cores and 64 virtual processors (0-63) The core has 8 virtual processors (0-7)   The core has 8 virtual processors (8-15)   The core has 8 virtual processors (16-23)   The core has 8 virtual processors (24-31)   The core has 8 virtual processors (32-39)   The core has 8 virtual processors (40-47)   The core has 8 virtual processors (48-55)   The core has 8 virtual processors (56-63)     SPARC-T4 (chipid 0, clock 2848 MHz) The physical processor has 8 cores and 64 virtual processors (64-127)   The core has 8 virtual processors (64-71)   The core has 8 virtual processors (72-79)   The core has 8 virtual processors (80-87)   The core has 8 virtual processors (88-95)   The core has 8 virtual processors (96-103)   The core has 8 virtual processors (104-111)   The core has 8 virtual processors (112-119)   The core has 8 virtual processors (120-127)     SPARC-T4 (chipid 1, clock 2848 MHz) (2.2) The "before" test: without processor binding. I started with a 4-member cluster deployed into 4 Oracle Solaris Containers. Each container used a unique gigabit Ethernet port for HTTP traffic. The containers shared a 10 gigabit Ethernet port for JDBC traffic. (2.3) The "after" test: with processor binding. I ran one application server in the Global Zone and another application server in each of the three non-global zones (NGZ):  (3.0) Configuration steps. The following steps need to be repeated for all three Oracle Solaris Containers. (3.1) Stop AppServers from the BUI. (3.2) Stop the NGZ. test# ssh test-z2 init 5 (3.3) Enable resource pools: test# svcadm enable pools (3.4) Create the resource pool: test# poolcfg -dc 'create pool pool-test-z2' (3.5) Create the processor set: test# poolcfg -dc 'create pset pset-test-z2' (3.6) Specify the maximum number of CPU's that may be addd to the processor set: test# poolcfg -dc 'modify pset pset-test-z2 (uint pset.max=32)' (3.7) bash syntax to add Virtual CPUs to the processor set: test# (( i = 64 )); while (( i < 96 )); do poolcfg -dc "transfer to pset pset-test-z2 (cpu $i)"; (( i = i + 1 )) ; done (3.8) Associate the resource pool with the processor set: test# poolcfg -dc 'associate pool pool-test-z2 (pset pset-test-z2)' (3.9) Tell the zone to use the resource pool that has been created: test# zonecfg -z test-z1 set pool=pool-test-z2 (3.10) Boot the Oracle Solaris Container test# zoneadm -z test-z2 boot (3.11) Save the configuration to /etc/pooladm.conf test# pooladm -s (4.0) Results. Using the resource pools improves both throughput and response time: (5.0) References: System Administration Guide: Oracle Solaris Containers-Resource Management and Oracle Solaris Zones Capitalizing on large numbers of processors with WebSphere Portal on Solaris WebSphere Application Server and T5440 (Dileep Kumar's Weblog)  http://www.brendangregg.com/zones.html Reuters Market Data System, RMDS 6 Multiple Instances (Consolidated), Performance Test Results in Solaris, Containers/Zones Environment on Sun Blade X6270 by Amjad Khan, 2009.

    Read the article

  • Moving from Linear Probing to Quadratic Probing (hash collisons)

    - by Nazgulled
    Hi, My current implementation of an Hash Table is using Linear Probing and now I want to move to Quadratic Probing (and later to chaining and maybe double hashing too). I've read a few articles, tutorials, wikipedia, etc... But I still don't know exactly what I should do. Linear Probing, basically, has a step of 1 and that's easy to do. When searching, inserting or removing an element from the Hash Table, I need to calculate an hash and for that I do this: index = hash_function(key) % table_size; Then, while searching, inserting or removing I loop through the table until I find a free bucket, like this: do { if(/* CHECK IF IT'S THE ELEMENT WE WANT */) { // FOUND ELEMENT return; } else { index = (index + 1) % table_size; } while(/* LOOP UNTIL IT'S NECESSARY */); As for Quadratic Probing, I think what I need to do is change how the "index" step size is calculated but that's what I don't understand how I should do it. I've seen various pieces of code, and all of them are somewhat different. Also, I've seen some implementations of Quadratic Probing where the hash function is changed to accommodated that (but not all of them). Is that change really needed or can I avoid modifying the hash function and still use Quadratic Probing? EDIT: After reading everything pointed out by Eli Bendersky below I think I got the general idea. Here's part of the code at http://eternallyconfuzzled.com/tuts/datastructures/jsw_tut_hashtable.aspx: 15 for ( step = 1; table->table[h] != EMPTY; step++ ) { 16 if ( compare ( key, table->table[h] ) == 0 ) 17 return 1; 18 19 /* Move forward by quadratically, wrap if necessary */ 20 h = ( h + ( step * step - step ) / 2 ) % table->size; 21 } There's 2 things I don't get... They say that quadratic probing is usually done using c(i)=i^2. However, in the code above, it's doing something more like c(i)=(i^2-i)/2 I was ready to implement this on my code but I would simply do: index = (index + (index^index)) % table_size; ...and not: index = (index + (index^index - index)/2) % table_size; If anything, I would do: index = (index + (index^index)/2) % table_size; ...cause I've seen other code examples diving by two. Although I don't understand why... 1) Why is it subtracting the step? 2) Why is it diving it by 2?

    Read the article

  • Connect MySQL database from Android

    - by Mistry Hardik
    hello people! well this is the code snippet i use to access the getUser.php to retrive user details from a MySQL database in my application: String result = ""; //the year data to send ArrayList<NameValuePair> nameValuePairs = new ArrayList<NameValuePair>(); nameValuePairs.add(new BasicNameValuePair("uid","demo")); //http post try{ HttpClient httpclient = new DefaultHttpClient(); HttpPost httppost = new HttpPost("http://192.xxx.xx.xxx/getUser.php"); httppost.setEntity(new UrlEncodedFormEntity(nameValuePairs)); HttpResponse response = httpclient.execute(httppost); HttpEntity entity = response.getEntity(); InputStream is = entity.getContent(); }catch(Exception e){ Log.e("log_tag", "Error in http connection "+e.toString()); } //convert response to string try{ InputStream is = null; BufferedReader reader = new BufferedReader(new InputStreamReader(is,"iso-8859-1"),8); StringBuilder sb = new StringBuilder(); String line = null; while ((line = reader.readLine()) != null) { sb.append(line + "\n"); } is.close(); result=sb.toString(); }catch(Exception e){ Log.e("log_tag", "Error converting result "+e.toString()); } //parse json data try{ JSONArray jArray = new JSONArray(result); for(int i=0;i<jArray.length();i++){ JSONObject json_data = jArray.getJSONObject(i); Log.i("log_tag","id: "+json_data.getInt("id")+ ", name: "+json_data.getString("fname")+ ", sex: "+json_data.getInt("sex")+ ", birthyear: "+json_data.getInt("dob") ); } } catch(JSONException e){ Log.e("log_tag", "Error parsing data "+e.toString()); } } This snippet is taken from http://helloandroid.com Everything is configured fine: the MySQL Db, IIS with FASTCGi, PHP tools and drivers. even the script below when called from browser with url: http://192.xxx.xx.x.xxx/getUser.php?uid=demo works fine, But returns error in android with java.lang.NullPointerException and org.json.JSONEXCEPTION: End of input at character 0 <?php mysql_connect("myhost","username","pwd"); mysql_select_db("mydb"); $q=mysql_query("SELECT * FROM userinfo WHERE uid ='".$_REQUEST['uid']."'"); while($e=mysql_fetch_assoc($q)) $output[]=$e; print(json_encode($output)); mysql_close(); ?> Can anybody help in this section? Regards, Mistry Hardik

    Read the article

  • Rail test case fixtures not loading

    - by Deano
    Rails appears to not be loading any fixtures for unit or functional tests. I have a simple 'products.yml' that parses and appears correct: ruby: title: Programming Ruby 1.9 description: Ruby is the fastest growing and most exciting dynamic language out there. If you need to get working programs delivered fast, you should add Ruby to your toolbox. price: 49.50 image_url: ruby.png My controller functional test begins with: require 'test_helper' class ProductsControllerTest < ActionController::TestCase fixtures :products setup do @product = products(:one) @update = { :title => 'Lorem Ipsum' , :description => 'Wibbles are fun!' , :image_url => 'lorem.jpg' , :price => 19.95 } end According to the book, Rails should "magically" load the fixtures (as my test_helper.rb has fixtures :all in it. I also added the explicit fixtures load (seen above). Yes Rails complains: user @ host ~/Dropbox/Rails/depot > rake test:functionals (in /Somewhere/Users/user/Dropbox/Rails/depot) /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/bin/ruby -Ilib:test "/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/gems/rake-0.8.3/lib/rake/rake_test_loader.rb" "test/functional/products_controller_test.rb" Loaded suite /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/gems/rake-0.8.3/lib/rake/rake_test_loader Started EEEEEEE Finished in 0.062506 seconds. 1) Error: test_should_create_product(ProductsControllerTest): NoMethodError: undefined method `products' for ProductsControllerTest:Class /test/functional/products_controller_test.rb:7 2) Error: test_should_destroy_product(ProductsControllerTest): NoMethodError: undefined method `products' for ProductsControllerTest:Class /test/functional/products_controller_test.rb:7 ... I did come across the other Rails test fixture question http://stackoverflow.com/questions/1547634/rails-unit-testing-doesnt-load-fixtures, but that leads to a plugin issue (something to do with the order of loading fixtures). BTW, I am developing on Mac OS X 10.6 with Rail 2.3.5 and Ruby 1.8.7, no additional plugins (beyond the base install). Any pointers on how to debug, why the magic of Rails appears to be failing here? Is it a version problem? Can I trace code into the libraries and find the answer? There are so many "mixin" modules I can't find where the fixtures method really lives.

    Read the article

  • NSObject release destroys local copy of object's data

    - by Spider-Paddy
    I know this is something stupid on my part but I don't get what's happening. I create an object that fetches data & puts it into an array in a specific format, since it fetches asynchronously (has to download & parse data) I put a delegate method into the object that needs the data so that the data fetching object copies it's formatted array into an array in the calling object. The problem is that when the data fetching object is released, the copy it created in the caller is being erased, code is: In .h file @property (nonatomic, retain) NSArray *imagesDataSource; In .m file // Fetch item details ImagesParser *imagesParserObject = [[ImagesParser alloc] init:self]; [imagesParserObject getArticleImagesOfArticleId:(NSInteger)currentArticleId]; [imagesParserObject release] <-- problematic release // Called by parser when images parsing is finished -(void)imagesDataTransferComplete:(ImagesParser *)imagesParserObject { self.imagesDataSource = [ImagesParserObject.returnedArray copy]; // copy array to local variable // If there are more pics, they must be assembled in an array for possible UIImageView animation NSInteger picCount = [imagesDataSource count]; if(picCount > 1) // 1 image is assumed to be the pic already displayed { // Build image array NSMutableArray *tempPicArray = [[NSMutableArray alloc] init]; // Temp space to hold images while building for(int i = 0; i < picCount; i++) { // Get Nr from only article in detailDataSource & pic name (Small) from each item in imagesDataSource NSString *picAddress = [NSString stringWithFormat:@"http://some.url.com/shopdata/image/article/%@/%@", [[detailDataSource objectAtIndex:0] objectForKey:@"Nr"], [[imagesDataSource objectAtIndex:i] objectForKey:@"Small"]]; NSURL *picURL = [NSURL URLWithString:picAddress]; NSData *picData = [NSData dataWithContentsOfURL:picURL]; [tempPicArray addObject:[UIImage imageWithData:picData]]; } imagesArray = [tempPicArray copy]; // copy makes immutable copy of array [tempPicArray release]; currentPicIndex = 0; // Assume first pic is pic already being shown } else imagesArray = nil; // No need for a needless pic array // Remove please wait message [pleaseWaitViewControllerObject.view removeFromSuperview]; } I put in tons of NSLog lines to keep track of what was going on & self.imagesDataSource is populated with the returned array but when the parser object is released self.imagesDataSource becomes empty. I thought self.imagesDataSource = [ImagesParserObject.returnedArray copy]; is supposed to make an independant object, like as if it was alloc, init'ed, so that self.imagesDataSource is not just a pointer to the parser's array but is it's own array. So why does the release of the parser object clear the copy of the array. (I checked & double checked that it's not something overwriting self.imagesDataSource, commenting out [imagesParserObject release] consistently fixes the problem) Also, I have exactly the same problem with self.detailDataSource which is declared & populated in the exact same way as self.imagesDataSource I thought that once I call the parser I could release it because the caller no longer needs to refer to it, all further activity is carried out by the parser object through it's delegate method, what am I doing wrong?

    Read the article

  • Android : create RelativeLayout in Onclick Button?(Get Crash)

    - by A.A
    I have an Xml that add LinearLayout and RelativeLayout in ScrollView by programmatically.When i add Text with OnclickButton for first time show me message but for 2nd time get me crash : <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:layout_width="match_parent" android:layout_height="match_parent" android:orientation="vertical" > <ScrollView android:id="@+id/scrollID" android:layout_width="fill_parent" android:layout_height="0dip" android:layout_weight="1" > </ScrollView> <LinearLayout android:layout_width="match_parent" android:layout_height="wrap_content" android:baselineAligned="true" android:orientation="horizontal" android:paddingBottom="5dp" android:paddingLeft="5dp" android:paddingRight="5dp" android:weightSum="1" > <EditText android:id="@+id/txtInpuConversation" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_weight="0.5" android:hint="Text" > <requestFocus /> </EditText> <Button android:id="@+id/btnSend" android:layout_width="0dip" android:layout_height="wrap_content" android:layout_weight="0.5" android:text="Click" /> </LinearLayout> </LinearLayout> My code : public class MainActivity extends Activity { String Medtconversation; EditText edtconversation; TextView txtviewUser; LinearLayout rilative; RelativeLayout relativeLayout; LinearLayout firstLinearLayout; ScrollView sclView; @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.activity_main); edtconversation = (EditText) findViewById(R.id.txtInpuConversation); sclView = (ScrollView) findViewById(R.id.scrollID); Button btn = (Button) findViewById(R.id.btnSend); final Context context = this; btn.setOnClickListener(new OnClickListener() { @Override public void onClick(View arg0) { Medtconversation = edtconversation.getText().toString(); txtviewUser = new TextView(MainActivity.this); txtviewUser.setText(Medtconversation); relativeLayout = new RelativeLayout(context); firstLinearLayout= new LinearLayout(context); LayoutParams LLParamsT = new LayoutParams(LayoutParams.WRAP_CONTENT,LayoutParams.WRAP_CONTENT); relativeLayout.setLayoutParams(LLParamsT); relativeLayout.addView(txtviewUser, new LayoutParams(LayoutParams.WRAP_CONTENT, LayoutParams.WRAP_CONTENT)); firstLinearLayout.setOrientation(LinearLayout.VERTICAL); LayoutParams LLParams = new LayoutParams(LayoutParams.WRAP_CONTENT,LayoutParams.WRAP_CONTENT); firstLinearLayout.setLayoutParams(LLParams); firstLinearLayout.addView(relativeLayout); Crash here now======>sclView.addView(firstLinearLayout, new LayoutParams(LayoutParams.WRAP_CONTENT, LayoutParams.WRAP_CONTENT)); edtconversation.setText(""); } }); } } I need that when i click on Button and send message for 2nd time create a new RelativeLayout in LinearLayout for show.(In scrollView) Error : AndroidRuntime MainActivity$1.onClick(MainActivity.java:54)

    Read the article

  • log4net logging problem

    - by Dotnet_user
    Hello everyone, I'm not sure if this is the right forum to post this question. But I'm just hoping someone here might have used log4net in the past, so hoping to get some help. I'm using log4net to log my exceptions. The configuration settings look like this: <?xml version="1.0" encoding="utf-8" ?> <configuration> <configSections> <section name="log4net" type="log4net.Config.Log4NetConfigurationSectionHandler, log4net"/> </configSections> <log4net debug="false"> <appender name="RollingLogFileAppender" type="log4net.Appender.RollingFileAppender"> <file value="C:\Logs\sample.log" /> <appendToFile value="true"/> <rollingStyle value="Size"/> <maxSizeRollBackups value="10"/> <maximumFileSize value="10MB"/> <staticLogFileName value="true"/> <layout type="log4net.Layout.PatternLayout"> <conversionPattern value="%-5level %date %logger.%method[line %line] - %message%newline"/> </layout> </appender> <root> <level value="INFO"/> <appender-ref ref="RollingLogFileAppender"/> </root> </log4net> </configuration> I started out by adding this configuration to web.config, but I got an error (VS studio could not find a schema for log4net-"Could not find schema information for the element log4net"). So I followed this link (http://stackoverflow.com/questions/174430/log4net-could-not-find-schema-information-messages) and configured my settings in a separate xml file and added the following line of code in my AssemblyInfo.cs: [assembly: log4net.Config.XmlConfigurator(ConfigFile = "xmlfile.xml", Watch = true)] And in the actual code, I placed this line: public void CreateUser(String username, String password) { try { log.Info("Inside createuser"); //code for creating user } catch(exception e) { log.Info("something happened in create user", e); } } The problem is that the log file is not being created. I can't see anything inside C:\Logs. Can anybody tell me what I'm doing wrong here? Any suggestions/inputs will be very helpful. Thank you all in advance.

    Read the article

  • Iphone App crashing on launch

    - by Declan Scott
    Hey, My simple iphone app is crashing on launch, it says "the application downloadText quit unexcpectedly i none of these windows that pop up when a mac app crashes and has a send to Apple button. My .h is below and i would greatly appreciate it if anyone could give me a hand as to what's wrong? thanks, Declan `#import "downloadTextViewController.h" @implementation downloadTextViewController // Implement viewDidLoad to do additional setup after loading the view, typically from a nib. - (void)viewDidLoad { NSString *myPath = [self saveFilePath]; NSLog(myPath); BOOL fileExists = [[NSFileManager defaultManager] fileExistsAtPath:myPath]; if (fileExists) { NSArray *values = [[NSArray alloc] initWithContentsOfFile:myPath]; textView.text = [values objectAtIndex:0]; [values release]; } // notification UIApplication *myApp = [UIApplication sharedApplication]; // add yourself to the dispatch table [[NSNotificationCenter defaultCenter] addObserver:self selector:@selector(applicationWillTerminate:) name:UIApplicationWillTerminateNotification object:myApp]; [super viewDidLoad]; } (IBAction)fetchData { /// Show activityIndicator / progressView NSURLRequest *downloadRequest = [NSURLRequest requestWithURL:[NSURL URLWithString:@"http://simpsonatyapps.com/exampletext.txt"] cachePolicy:NSURLRequestReloadIgnoringCacheData timeoutInterval:1.0]; NSURLConnection *downloadConnection = [[NSURLConnection alloc] initWithRequest:downloadRequest delegate:self]; if (downloadConnection) downloadedData = [[NSMutableData data] retain]; else { /// Error message } } (void)connection:(NSURLConnection *)downloadConnection didReceiveData:(NSData *)data { [downloadedData appendData:data]; NSString *file = [[NSString alloc] initWithData:downloadedData encoding:NSUTF8StringEncoding]; textView.text = file; /// Remove activityIndicator / progressView [[UIApplication sharedApplication] setApplicationIconBadgeNumber:1]; } (NSString *) saveFilePath { NSArray *pathArray = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES); return [[pathArray objectAtIndex:0] stringByAppendingPathComponent:@"savedddata.plist"]; } (void)applicationWillTerminate:(UIApplication *)application { NSArray *values = [[NSArray alloc] initWithObjects:textView.text,nil]; [values writeToFile:[self saveFilePath] atomically:YES]; [values release]; } (void)didReceiveMemoryWarning { // Releases the view if it doesn't have a superview. [super didReceiveMemoryWarning]; // Release any cached data, images, etc that aren't in use. } (void)viewDidUnload { // Release any retained subviews of the main view. // e.g. self.myOutlet = nil; } (void)dealloc { [super dealloc]; } (NSCachedURLResponse *)connection:(NSURLConnection *)connection willCacheResponse:(NSCachedURLResponse *)cachedResponse { return nil; } @end `

    Read the article

  • How to add image in ListView android

    - by Wawan Den Frastøtende
    i would like to add images on my list view, and i have this code package com.wilis.appmysql; import android.app.ListActivity; import android.content.Intent; import android.os.Bundle; //import android.util.Log; import android.view.View; import android.widget.ArrayAdapter; import android.widget.ListView; import android.widget.Toast; public class menulayanan extends ListActivity { /** Called when the activity is first created. */ public void onCreate(Bundle icicle) { super.onCreate(icicle); // Create an array of Strings, that will be put to our ListActivity String[] menulayanan = new String[] { "Berita Terbaru", "Info Item", "Customer Service", "Help","Exit"}; //Menset nilai array ke dalam list adapater sehingga data pada array akan dimunculkan dalam list this.setListAdapter(new ArrayAdapter<String>(this, android.R.layout.simple_list_item_1,menulayanan)); } @Override /**method ini akan mengoveride method onListItemClick yang ada pada class List Activity * method ini akan dipanggil apabilai ada salah satu item dari list menu yang dipilih */ protected void onListItemClick(ListView l, View v, int position, long id) { super.onListItemClick(l, v, position, id); // Get the item that was clicked // Menangkap nilai text yang dklik Object o = this.getListAdapter().getItem(position); String pilihan = o.toString(); // Menampilkan hasil pilihan menu dalam bentuk Toast tampilkanPilihan(pilihan); } /** * Tampilkan Activity sesuai dengan menu yang dipilih * */ protected void tampilkanPilihan(String pilihan) { try { //Intent digunakan untuk sebagai pengenal suatu activity Intent i = null; if (pilihan.equals("Berita Terbaru")) { i = new Intent(this, PraBayar.class); } else if (pilihan.equals("Info Item")) { i = new Intent(this, PascaBayar.class); } else if (pilihan.equals("Customer Service")) { i = new Intent(this, CustomerService.class); } else if (pilihan.equals("Help")) { i = new Intent(this, Help.class); } else if (pilihan.equals("Exit")) { finish(); } else { Toast.makeText(this,"Anda Memilih: " + pilihan + " , Actionnya belum dibuat", Toast.LENGTH_LONG).show(); } startActivity(i); } catch (Exception e) { e.printStackTrace(); } } } and i want to add different image per list, so i mean is i want to add a.png to "Berita Terbaru", b.png to "Info Item", c.png "Customer Service" , so how to do it? i was very confused about this, thanks before...

    Read the article

< Previous Page | 2186 2187 2188 2189 2190 2191 2192 2193 2194 2195 2196 2197  | Next Page >