Search Results

Search found 586 results on 24 pages for '802 11n'.

Page 22/24 | < Previous Page | 18 19 20 21 22 23 24  | Next Page >

• Setting up a WPA-PSK network card to connect to a WPA2 network

  - by mattshepherd

  I'm currently doing a spare-parts build to put a media computer in the living room, and having a devil of a time getting my Rosewill RNX-6300 wireless card to connect to my network. I'm trying to set it up using Windows as opposed to the proprietary Rosewill software -- the Rosewill software is a little over my head. It can find the network fine, but when I try to connect, I don't get the password prompt -- it moves straight to "validating identity," scans, and then says "Windows was not able to find a certificate to log you on to the wireless network Foo." The maddening thing is that the card was working fine a week ago, in the same box, using the same OS. I pulled everything out, swapped out the motherboard, and reinstalled Windows on a freshly wiped hard drive, and now I can't get it up and running again. Suggestions? I've taken several runs at it, including attempting to manually change the settings for the network to include WPA-PSK and AES and the password, and I'm a bit worried that I've totally boned everything. My router settings: ipconfig/all results from the XP box: Again, this card was working on this network a week ago. I can't figure out why I can't get it up and running now. There's no WPA2 on the card, just WPA and WPA-PSK: WPA-PSK was the only setting that would let me enter a network key. I had TKIP and AES as options there, but cipher type is AES on the router, so I chose that. (I tried TKIP later, when this didn't work, with the same results as described below.) So I set it to WPA-PSK / AES and entered my security key. It's mixed letters and numbers, 32 characters long. No joy. Still "waiting for reply" in the main screen, and "cannot find certificate" on the pop-up. And if I try again and return to the settings again, it is reset to Open/AES. It also re-enables 802.1x in the Authentication tab if I've deselected it with WPA-PSK. It also reshortens the password. I have no idea how I blundered into getting this working in the past. I am, as you can tell, far from proficient at this. It was working before, though. What am I getting wrong?

  Read the article

• Problems when trying to connect to a router wirelessly

  - by Ruud Lenders

  The situation - At my girlfriend's parents' place there are six Windows 7 devices that are wired or wireless connected to a router: 3 dekstops and 3 laptops. There are also several smartphones using the router. The router is secured with WPA2 (AES). The problem - We never had any problems with the router for over a year. But recently - about 3 weeks ago - my girlfriend's laptop (HP) and my laptop (ASUS) started to develop problems while trying to connect to the router. The router has stopped showing up from the network list. Sometimes it comes back and shows up, but then it keeps saying something along the lines of "Could not connect", and not long after that it dissapears again. The range of the router is not the problem here, because we experience the same when we sit next to the router. Sometimes, if we are lucky, and waited a long time (10-15 minutes) without using the laptop for anything, the laptop will eventually succesful connect to the router. The attempts - Of course, the Window 7 troubleshooter. We tried troubleshooting the connection problems and the wireless network adapter, but no luck. We also reset the router enough times to know that's not helping either. Here's the full list of things we tried, but did not help: Running the Windows 7 troubleshooter Resetting the router (more than once) Setting the router settings to factory defaults Disconnecting all other devices except one laptop Applying a system restore Trying static/dynamic IP/DNS - Dynamic is better, right? Enabling/disabling IPv6 - Should I keep IPv6 disabled? Running the command: netsh wlan stop hostednetwork Running the command: netsh wlan set hostednetwork mode=disallow Updating/reïnstalling wireless adapter drivers The tests - To help finding the core of the problem, we tested the following: Plugging an ethernet cable in the router and in our laptops - worked fine Connecting someone else's laptop to the router (wireless) - worked fine Connecting our laptops to someone else's router - worked fine The router - This information might be relevant: Router model: Sitecom 300N Wireless Router Router hardware: version 01 The DCHP Server's IPs range from 192.168.0.100 to 192.168.0.200. Router settings: Wireless channel: 12 Channel bandwidth: 20/40 MHz Extension channel: 8 Preamble type: Long 802.11g protection: Disabled UPnP: Enabled The laptops - If you are wondering about our laptops: My laptop model: ASUS Pro64JQ Girlfriend's laptop: HP Pavillion G6 OS: Both Windows 7 Professional x64 - with Service Pack 1 My wireless adapter: Atheros AR9285 AdHoc 11n: Enabled The question - Does anyone have experienced the same problems as I do? Or does someone know how to solve this? Are there more tricks I can try, or settings I should change? Note - Our laptops are not slow or old. My laptop is 1.5 years old, and the other laptop is just 5 months old. I know how to keep laptops clean and I'm pretty sure both laptops are not bloated with useless software.

  Read the article

• Linksys WiFi usb dongle and linux woes

  - by MrStatic

  I have a Linksys WUSB54GC usb dongle and I have exhausted every thing I know about making this thing work in linux. I am using Fedora 13. Since it is not ready I can not view any networks. Any ideas would be great. tail of the system log Jun 2 20:14:35 localhost kernel: usb 1-7: new high speed USB device using ehci_hcd and address 8 Jun 2 20:14:35 localhost kernel: usb 1-7: New USB device found, idVendor=1737, idProduct=0077 Jun 2 20:14:35 localhost kernel: usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jun 2 20:14:35 localhost kernel: usb 1-7: Product: 802.11 g WLAN Jun 2 20:14:35 localhost kernel: usb 1-7: Manufacturer: Ralink Jun 2 20:14:35 localhost kernel: usb 1-7: SerialNumber: 1.0 Jun 2 20:14:35 localhost kernel: Registered led device: rt2800usb-phy3::radio Jun 2 20:14:35 localhost kernel: Registered led device: rt2800usb-phy3::assoc Jun 2 20:14:35 localhost kernel: Registered led device: rt2800usb-phy3::quality Jun 2 20:14:35 localhost NetworkManager[1367]: <info> found WiFi radio killswitch rfkill3 (at /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.0/ieee80211/phy3/rfkill3) (driver <unknown>) Jun 2 20:14:35 localhost kernel: rt2800usb 1-7:1.0: firmware: requesting rt2870.bin Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): driver supports SSID scans (scan_capa 0x01). Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): new 802.11 WiFi device (driver: 'rt2800usb' ifindex: 6) Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/4 Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): now managed Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): device state change: 1 -> 2 (reason 2) Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): bringing up device. Jun 2 20:14:35 localhost kernel: ADDRCONF(NETDEV_UP): wlan0: link is not ready Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): preparing device. Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): deactivating device (reason: 2). Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): supplicant interface state: starting -> ready Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): device state change: 2 -> 3 (reason 42) [root@localhost log]# iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bg Mode:Managed Access Point: Not-Associated Tx-Power=8 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on

  Read the article

• debian packages version convention

  - by JackWu

  I'm using debian/Ubuntu, and get confused about versions of packages. When using dpkg -l command, I get: ii vim 2:7.3.429-2ubuntu2.1 Vi IMproved - enhanced vi editor ii vim-common 2:7.3.429-2ubuntu2.1 Vi IMproved - Common files ii vim-runtime 2:7.3.429-2ubuntu2.1 Vi IMproved - Runtime files ii vim-tiny 2:7.3.429-2ubuntu2.1 Vi IMproved - enhanced vi editor - compact version ii virt-what 1.11-1 detect if we are running in a virtual machine ii w3m 0.5.3-5ubuntu1 WWW browsable pager with excellent tables/frames support ii watershed 6 reduce superfluous executions of idempotent command ii wget 1.13.4-2ubuntu1 retrieves files from the web ii whiptail 0.52.11-2ubuntu10 Displays user-friendly dialog boxes from shell scripts ii whoopsie 0.1.33 Ubuntu crash database submission daemon ii wimlib9 1.5.0-1~webupd8~precise Library to extract, create, modify, and mount WIM files ii wimtools 1.5.0-1~webupd8~precise Tools to extract, create, modify, and mount WIM files ii wireless-tools 30~pre9-5ubuntu2 Tools for manipulating Linux Wireless Extensions ii wpasupplicant 0.7.3-6ubuntu2.1 client support for WPA and WPA2 (IEEE 802.11i) ii x11-common 1:7.6+12ubuntu2 X Window System (X.Org) infrastructure ii x11-utils 7.6+4ubuntu0.1 X11 utilities ii xauth 1:1.0.6-1 X authentication utility ii xbitmaps 1.1.1-1 Base X bitmaps ii xclip 0.12-1 command line interface to X selections ii xfonts-encodings 1:1.0.4-1ubuntu1 Encodings for X.Org fonts ii xfonts-utils 1:7.6+1 X Window System font utility programs ii xkb-data 2.5-1ubuntu1.3 X Keyboard Extension (XKB) configuration data ii xml-core 0.13 XML infrastructure and XML catalog file support rc xpdf 3.02-21build1 Portable Document Format (PDF) reader ii xterm 271-1ubuntu2.1 X terminal emulator ii xz-lzma 5.1.1alpha+20110809-3 XZ-format compression utilities - compatibility commands ii xz-utils 5.1.1alpha+20110809-3 XZ-format compression utilities ii zabbix-agent 1:1.8.11-1 network monitoring solution - agent ii zlib1g 1:1.2.3.4.dfsg-3ubuntu4 compression library - runtime ii zlib1g-dev 1:1.2.3.4.dfsg-3ubuntu4 compression library - development ii zsh 4.3.17-1ubuntu1 shell with lots of features The third column is version, but it all messed up in a way I can't understand. I mean, different packages use total different naming specification. Here are the major questions: Why there are ubuntu in them, and there are not? what all the special -~+ mean? alpha and build, dfsg, what are they? Can I just use them casually? vim and other packages have 2:, what does that mean? How version comparison works, since they can be so different? Can anyone please explain this to me? Or where can I find an official document? Thanks in advance.

  Read the article

• Wireless Network Performance Issues

  - by colithium

  My brand new Dell XPS system has been running flawlessly except its abysmal download speeds. I have tried isolating every variable I could possibly think of but I can't figure out the problem. I've talked to Dell and Belkin without making progress (thought I'd try). Here are the speeds: Note that most of the time, upload speeds are actually much faster than download speeds (around 4.0 Mb/s which is better than most other devices on the network) It's not the ISP. The slowdown happens even when transferring files inside the network. Plus every other wireless device gets approximately this: It's not the wireless router. It's a Lynksis WRT160N v1 with the latest firmware (1.02.2). Plus everything else connected to it has normal speeds. It's not the browser. Speeds are the same in IE, FF, and when transferring files with Windows between computers. It's not the wireless adapter. I've tried a Belkin N Wireless USB Adapter (which works fine on another computer) and a Dell Wireless Draft 802.11n WLAN Mini-Card. They have the same slow speeds when connected to the problem computer. It's not the adapter connection. One adapter used USB and the other is a Mini-Card. It's not antenna placement. With the same antenna position and the same device, I get different speeds when connected to the problem computer vs a good computer. Plus everything reports the connection speed as at least 11Mbps and good signal strength. I've tried disabling IPv6 since it sometimes causes weird problems. I've tried disabling Windows Firewall/anti-virus. I've ensured the computer has updated drivers for both adapters. I've ensured that Windows is up to date and so is the BIOS. For the USB adapter I ensured that that USB port functioned at normal speeds with other USB devices. What else could it possibly be? I finally received my copy of Windows 7 and will be trying that. I'd rather not install Windows 7 because of a particular program that will stop working so a solution besides that is welcome. Specs: Vista x64 Core i7 920 6GB RAM 500GB HD GTX 260

  Read the article

• Ubuntu hardware wireless switch has no effect after suspend and 13.10 upgrade

  - by blaineh

  I'm posting this on SU after it stalled on askubuntu. I hope someone here can help! If you'd prefer to answer on AU itself, here's the link: http://askubuntu.com/questions/365177/hardware-wireless-switch-has-no-effect-after-suspend-and-13-10-upgrade Wireless works fine after a reboot, but after a suspend the hardware switch (for my laptop this is f12) has no effect on the wireless, it is just permanently off, and shows that it is with a red LED. My rfkill list all reads: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes 1: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes Any combination with rfkill <un>block wifi doesn't work, although one time first blocking then unblocking actually turned it on again. sudo lshw -C network reads: *-network DISABLED description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 78:e4:00:65:2e:3f width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.11.0-12-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:90100000-9010ffff *-network DISABLED description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 02 serial: c8:0a:a9:89:b4:30 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:2000(size=256) memory:90010000-90010fff memory:90000000-9000ffff memory:90020000-9002ffff Also, adding a /etc/pm/sleep.d/brcm.sh file as recommended here simply prevents the laptop from suspending at all, which of course is no good. This question has an answer urging to install the original driver, but it wasn't an "accepted answer" so I'd rather not take a chance on it. Also I'll admit I'm a bit lost on that and would like help doing so with the specific information I've given. I would be happy to provide more information, so long as you're willing to help me find it for you! This is a very annoying bug. I have a Compaq Presario CQ62. Edit. Output of lspci | grep Network: 02:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01) Edit. This morning, I had had the laptop suspended all night, and then when I tried to awake it, it simply wouldn't. It would try, and then it would sleep again (I guess it felt a little bit like me! </badjoke>). Is it possible these problems are related? Edit. I don't have enough reputation on SU proper to post links to pastebins and other questions I've tried, so I'm putting them in comments, and of course they're available in the original question.

  Read the article

• Network switching issues with MacOS 10.7?

  - by Denis

  I'm having a wired problem and hope somebody can tip me, what way should I dig to. I'm using MacBookPro with Lion 10.7.3 both at my working place & at home. At working place, we have a domain-based network with 802.1x authorization (more than 400 computers) and to connect it I'm using Ethernet cable. IP range is 10.10.2.*. All network settings are setup automatically by DHCP. Also, in settings, I have Network Account Server setup in the User&Groups Settings for my work Domain server - and it is available only from corporate network. At home, I have an ADSL router, that shares Internet connection by WiFi in NAT mode. I'm using WiFi to connect it. Router gives out addresses from 192.168.1.* range and all settings are also set up by router's DHCP. So, my problem is the following. When I come back home from the office, I open my MacBook and AirPort automatically connects my WiFi network. After this, for about 1 minute I'm able to browse sites & ping hosts successfully. But after this minute, network connection is broken down. All pings return time-out. trace route to google.com stops on 192.168.1.1 (which is my router). This lasts for 3-4 minutes. After that network connection is automatically repaired and all pings go smoothly again. At the same time, when my MacBook return timeouts, I can successfully ping any host from my wife's MacBook - so this doesn't look like router issue. When I come to the office, I don't have any issues and Internet connection is available & stable moments after ethernet cable plugged in. Do anybody has any clues about this? What should I monitor & what settings look for resolving this issue? Please, ask, what additional information should I provide. Hoping for good advice & thanks in advance!

  Read the article

• System won't boot: Gigabyte HD 7790 1GB OC GPU issue or Corsair VS550 PSU issue?

  - by MGOwen

  Installed a new GPU, and PC won't boot. Turn it on and: No monitor signal at all (tried HDMI and VGA via DVI, on 2 working monitors). CPU and GPU fans DO spin, but No system beeps, no sounds from drives (they might make a small noise in the first 1 second or so, but there's definitely no OS loading or anything like that) If hit "power off" button it turns off immediately (no holding down for 3 seconds like usual) If I put my old HD 5670 GPU back in, everything works fine. But (plot twist!) card is not totally dead. My friend put it in his PC, and it works fine (he even played a game for 15 minutes, no issues). He has a Corsair TX850 850W and a Gigabyte MB. So my main theory is: the GPU isn't getting enough power from the PSU. But is it: Bad PSU? Seems unlikely, since it works fine with the other GPU. Also, the PSU Is brand new and 550W (single 42A/504W 12V rail). Overkill for this GPU. Corsair is a decent brand, but maybe just mine is faulty? Bad GPU? Could it be drawing more power than it should be, somehow, or something? Supposedly HD 7790 needs only 21A/75W on the 12v rail, though this one is factory overclocked a bit... but should that triple the power requirement? Something else? Could there be a motherboard incompatibility somehow? Both MB and GPU are less than a year old and PCI Express 3.0 x16. Things I've tried: Re-seating the video card Testing PC with old GPU (works fine, same PCIe slot). Checked AMD's stated amp/watt requirements of a 7790 and my PSU (see above). My PSU can output twice the amps (single rail) and 5x the Wattage a 7790 needs. Here are the full specs: Gigabyte HD 7790 1GB OC GPU Corsair VS550 550W PSU 4GB RAM AsRock H61M U3S3 motherboard i3-2100 500GB SATA HDD (2007-ish) blu-ray drive (new) PCI 802.11g card Edit: Motherboard BIOS Update seems to have fixed it. (If anyone has same problem and it doesn't work, comment here).

  Read the article

• Computer suddenly dies; screen displays weird flickering lines, then restarts

  - by Imray

  I've been having this terrible problem for a little while and just managed to get a picture of 'dead screen' for the first time and I am posting it to seek help. Randomly, at irregular intervals (typically once a week), while working on something (it's been different things every time) my computer will just suddenly go dead - the screen turns to exactly the picture below (the lines flicker a little bit), it hangs there for a few seconds and then restarts. Obviously this is extremely frustrating and I want to try to stop it. I've searched numerous postings with similar keywords but nothing exactly the same as mine. Does anyone have any idea what might be the cause of this? I would post all my system settings and installed programs but the list is long and I don't know how much relevance each item would be. If you'd like to know something specific, please comment and I'll let you know whatever you need. SPECS C:\Users\Imray>systeminfo Host Name: Imray OS Name: Microsoft Windows 7 Professional OS Version: 6.1.7600 N/A Build 7600 OS Manufacturer: Microsoft Corporation OS Configuration: Standalone Workstation OS Build Type: Multiprocessor Free Registered Owner: Imray - Owner Registered Organization: Product ID: 00371-152-9333854-85895 Original Install Date: 06/09/1999, 5:45:21 PM System Boot Time: 22/03/2013, 8:58:18 AM System Manufacturer: Gateway System Model: DX4840 System Type: x64-based PC Processor(s): 1 Processor(s) Installed. [01]: Intel64 Family 6 Model 37 Stepping 2 GenuineIntel ~3201 Mhz BIOS Version: American Megatrends Inc. P01-A3 , 17/05/2010 Windows Directory: C:\Windows System Directory: C:\Windows\system32 Boot Device: \Device\HarddiskVolume2 System Locale: en-us;English (United States) Input Locale: en-us;English (United States) Time Zone: (UTC-05:00) Eastern Time (US & Canada) Total Physical Memory: 6,135 MB Available Physical Memory: 3,632 MB Virtual Memory: Max Size: 12,268 MB Virtual Memory: Available: 8,114 MB Virtual Memory: In Use: 4,154 MB Page File Location(s): C:\pagefile.sys Domain: WORKGROUP Logon Server: \\Imray-OWNER Hotfix(s): 4 Hotfix(s) Installed. [01]: KB971033 [02]: KB958559 [03]: KB977206 [04]: KB981889 Network Card(s): 2 NIC(s) Installed. [01]: 802.11n Wireless PCI Express Card LAN Adapter Connection Name: Wireless Network Connection DHCP Enabled: Yes DHCP Server: 192.168.2.1 IP address(es) [01]: 192.168.2.13 [02]: fe80::1df1:5399:6890:91f6 [02]: Microsoft Virtual WiFi Miniport Adapter Connection Name: Wireless Network Connection 2 DHCP Enabled: Yes DHCP Server: N/A IP address(es) Graphics Card Specs Name ATI Radeon HD 5570 PNP Device ID PCI\VEN_1002&DEV_68D9&SUBSYS_E142174B&REV_00\4&18A4B35E&0&0008 Adapter Type ATI display adapter (0x68D9), ATI Technologies Inc. compatible Adapter Description ATI Radeon HD 5570 Adapter RAM 1.00 GB (1,073,741,824 bytes) Installed Drivers atiu9p64 aticfx64 aticfx64 atiu9pag aticfx32 aticfx32 atiumd64 atidxx64 atidxx64 atiumdag atidxx32 atidxx32 atiumdva atiumd6a atitmm64 Driver Version 8.700.0.0 INF File oem1.inf (ati2mtag_Evergreen section) Color Planes Not Available Color Table Entries 4294967296 Resolution 1920 x 1080 x 59 hertz Bits/Pixel 32 Memory Address 0xD0000000-0xDFFFFFFF Memory Address 0xFBDE0000-0xFBDFFFFF I/O Port 0x0000D000-0x0000DFFF IRQ Channel IRQ 4294967293 I/O Port 0x000003B0-0x000003BB I/O Port 0x000003C0-0x000003DF Memory Address 0xA0000-0xBFFFF Driver c:\windows\system32\drivers\atikmpag.sys (8.14.1.6095, 181.00 KB (185,344 bytes), 06/09/1999 5:59 PM)

  Read the article

• Error starting modern compiler

  - by saloni

  In my servlet , I m using Tomcat 5.0 and JRE is 1.5.0 but it is giving error when I click on the URL . As when I created a war file of my project and deployed in tomcat than it is working fine . It means that only problem with my eclipse configuration ERROR IS : - Apr 5, 2010 3:20:22 PM org.apache.jasper.compiler.Compiler generateClass SEVERE: Javac exception Error starting modern compiler at org.apache.tools.ant.taskdefs.compilers.Javac13.execute(Javac13.java:69) at org.apache.tools.ant.taskdefs.Javac.compile(Javac.java:942) at org.apache.tools.ant.taskdefs.Javac.execute(Javac.java:764) at org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:382) at org.apache.jasper.compiler.Compiler.compile(Compiler.java:472) at org.apache.jasper.compiler.Compiler.compile(Compiler.java:451) at org.apache.jasper.compiler.Compiler.compile(Compiler.java:439) at org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:511) at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:295) at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292) at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236) at javax.servlet.http.HttpServlet.service(HttpServlet.java:802) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214) at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520) at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152) at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137) at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118) at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109) at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929) at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799) at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705) at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577) at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683) at java.lang.Thread.run(Unknown Source) Caused by: java.lang.reflect.InvocationTargetException at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) at java.lang.reflect.Method.invoke(Unknown Source) at org.apache.tools.ant.taskdefs.compilers.Javac13.execute(Javac13.java:61) ... 35 more Caused by: java.lang.VerifyError: class com.sun.tools.javac.jvm.Target overrides final method . at java.lang.ClassLoader.defineClass1(Native Method) at java.lang.ClassLoader.defineClass(Unknown Source) at java.security.SecureClassLoader.defineClass(Unknown Source) at org.apache.catalina.loader.WebappClassLoader.findClassInternal(WebappClassLoader.java:1634) at org.apache.catalina.loader.WebappClassLoader.findClass(WebappClassLoader.java:860) at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1307) at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1189) at java.lang.ClassLoader.loadClassInternal(Unknown Source) at com.sun.tools.javac.Main.compile(Main.java:42) ... 40 more --- Nested Exception --- java.lang.reflect.InvocationTargetException at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) at java.lang.reflect.Method.invoke(Unknown Source) at org.apache.tools.ant.taskdefs.compilers.Javac13.execute(Javac13.java:61) at org.apache.tools.ant.taskdefs.Javac.compile(Javac.java:942) at org.apache.tools.ant.taskdefs.Javac.execute(Javac.java:764) at org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:382) at org.apache.jasper.compiler.Compiler.compile(Compiler.java:472) at org.apache.jasper.compiler.Compiler.compile(Compiler.java:451) at org.apache.jasper.compiler.Compiler.compile(Compiler.java:439) at org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:511) at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:295) at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292) at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236) at javax.servlet.http.HttpServlet.service(HttpServlet.java:802) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214) at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520) at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152) at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137) at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118) at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109) at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929) at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799) at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705) at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577) at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683) at java.lang.Thread.run(Unknown Source) Caused by: java.lang.VerifyError: class com.sun.tools.javac.jvm.Target overrides final method . at java.lang.ClassLoader.defineClass1(Native Method) at java.lang.ClassLoader.defineClass(Unknown Source) at java.security.SecureClassLoader.defineClass(Unknown Source) at org.apache.catalina.loader.WebappClassLoader.findClassInternal(WebappClassLoader.java:1634) at org.apache.catalina.loader.WebappClassLoader.findClass(WebappClassLoader.java:860) at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1307) at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1189) at java.lang.ClassLoader.loadClassInternal(Unknown Source) at com.sun.tools.javac.Main.compile(Main.java:42) ... 40 more Apr 5, 2010 3:20:22 PM org.apache.jasper.compiler.Compiler generateClass SEVERE: Env: Compile: javaFileName=/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/work/Catalina/localhost/SampleSaloni//org/apache/jsp/page\form_jsp.java classpath=/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/classes/;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/ant-launcher.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/ant.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/commons-collections-3.1.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/commons-dbcp-1.2.1.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/commons-el.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/commons-pool-1.2.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/jasper-compiler.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/jasper-runtime.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/jsp-api.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/naming-common.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/naming-factory.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/naming-java.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/naming-resources.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/tools.jar;D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\work\Catalina\localhost\SampleSaloni;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/classes/;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/ant-launcher.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/ant.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/commons-collections-3.1.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/commons-dbcp-1.2.1.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/commons-el.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/commons-pool-1.2.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/jasper-compiler.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/jasper-runtime.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/jsp-api.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/naming-common.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/naming-factory.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/naming-java.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/naming-resources.jar;/D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/SampleSaloni/WEB-INF/lib/tools.jar;D:/software setups/jakarta-tomcat-5.0.28/common/classes/;D:/software setups/jakarta-tomcat-5.0.28/common/lib/ant-launcher.jar;D:/software setups/jakarta-tomcat-5.0.28/common/lib/ant.jar;D:/software setups/jakarta-tomcat-5.0.28/common/lib/commons-collections-3.1.jar;D:/software setups/jakarta-tomcat-5.0.28/common/lib/commons-dbcp-1.2.1.jar;D:/software setups/jakarta-tomcat-5.0.28/common/lib/commons-el.jar;D:/software setups/jakarta-tomcat-5.0.28/common/lib/commons-pool-1.2.jar;D:/software setups/jakarta-tomcat-5.0.28/common/lib/jasper-compiler.jar;D:/software setups/jakarta-tomcat-5.0.28/common/lib/jasper-runtime.jar;D:/software setups/jakarta-tomcat-5.0.28/common/lib/jsp-api.jar;D:/software setups/jakarta-tomcat-5.0.28/common/lib/naming-common.jar;D:/software setups/jakarta-tomcat-5.0.28/common/lib/naming-factory.jar;D:/software setups/jakarta-tomcat-5.0.28/common/lib/naming-java.jar;D:/software setups/jakarta-tomcat-5.0.28/common/lib/naming-resources.jar;D:/software setups/jakarta-tomcat-5.0.28/common/lib/servlet-api.jar;D:/software setups/jakarta-tomcat-5.0.28/common/lib/tools.jar;/D:/software%20setups/jakarta-tomcat-5.0.28/bin/bootstrap.jar;/C:/Program%20Files/Java/jre1.5.0_09/lib/ext/dnsns.jar;/C:/Program%20Files/Java/jre1.5.0_09/lib/ext/sunjce_provider.jar;/C:/Program%20Files/Java/jre1.5.0_09/lib/ext/sunpkcs11.jar cp=D:\software setups\jakarta-tomcat-5.0.28\bin\bootstrap.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\classes cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\ant-launcher.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\ant.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\commons-collections-3.1.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\commons-dbcp-1.2.1.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\commons-el.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\commons-pool-1.2.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\jasper-compiler.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\jasper-runtime.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\jsp-api.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\naming-common.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\naming-factory.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\naming-java.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\naming-resources.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\tools.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\work\Catalina\localhost\SampleSaloni cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\classes cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\ant-launcher.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\ant.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\commons-collections-3.1.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\commons-dbcp-1.2.1.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\commons-el.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\commons-pool-1.2.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\jasper-compiler.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\jasper-runtime.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\jsp-api.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\naming-common.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\naming-factory.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\naming-java.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\naming-resources.jar cp=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\SampleSaloni\WEB-INF\lib\tools.jar cp=D:\software setups\jakarta-tomcat-5.0.28\common\classes cp=D:\software setups\jakarta-tomcat-5.0.28\common\lib\ant-launcher.jar cp=D:\software setups\jakarta-tomcat-5.0.28\common\lib\ant.jar cp=D:\software setups\jakarta-tomcat-5.0.28\common\lib\commons-collections-3.1.jar cp=D:\software setups\jakarta-tomcat-5.0.28\common\lib\commons-dbcp-1.2.1.jar cp=D:\software setups\jakarta-tomcat-5.0.28\common\lib\commons-el.jar cp=D:\software setups\jakarta-tomcat-5.0.28\common\lib\commons-pool-1.2.jar cp=D:\software setups\jakarta-tomcat-5.0.28\common\lib\jasper-compiler.jar cp=D:\software setups\jakarta-tomcat-5.0.28\common\lib\jasper-runtime.jar cp=D:\software setups\jakarta-tomcat-5.0.28\common\lib\jsp-api.jar cp=D:\software setups\jakarta-tomcat-5.0.28\common\lib\naming-common.jar cp=D:\software setups\jakarta-tomcat-5.0.28\common\lib\naming-factory.jar cp=D:\software setups\jakarta-tomcat-5.0.28\common\lib\naming-java.jar cp=D:\software setups\jakarta-tomcat-5.0.28\common\lib\naming-resources.jar cp=D:\software setups\jakarta-tomcat-5.0.28\common\lib\servlet-api.jar cp=D:\software setups\jakarta-tomcat-5.0.28\common\lib\tools.jar cp=D:\software%20setups\jakarta-tomcat-5.0.28\bin\bootstrap.jar cp=C:\Program%20Files\Java\jre1.5.0_09\lib\ext\dnsns.jar cp=C:\Program%20Files\Java\jre1.5.0_09\lib\ext\sunjce_provider.jar cp=C:\Program%20Files\Java\jre1.5.0_09\lib\ext\sunpkcs11.jar work dir=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\work\Catalina\localhost\SampleSaloni extension dir=C:\Program Files\Java\jre1.5.0_09\lib\ext srcDir=D:\OffViv\JAVA_IDE\workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\work\Catalina\localhost\SampleSaloni include=org/apache/jsp/page/form_jsp.java Apr 5, 2010 3:20:22 PM org.apache.jasper.compiler.Compiler generateClass SEVERE: Error compiling file: /D:/OffViv/JAVA_IDE/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/work/Catalina/localhost/SampleSaloni//org/apache/jsp/page\form_jsp.java [javac] Compiling 1 source file

  Read the article

• Wireless cuts out on Toshiba Satellite S7208

  - by alecRN

  I recently got a Toshiba Satellite L875-S7208 with Windows 7 preinstalled. I installed Ubuntu 12.04 LTS dual boot to the same Windows partition. However, usually 15 minutes or less after booting, the wifi connection dies. Here's some hopefully relevant information: lspci -knn 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) Subsystem: Toshiba America Info Systems Device [1179:fb41] Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) Subsystem: Toshiba America Info Systems Device [1179:fb40] Kernel driver in use: i915 Kernel modules: i915 00:14.0 USB controller [0c03]: Intel Corporation Panther Point USB xHCI Host Controller [8086:1e31] (rev 04) Subsystem: Toshiba America Info Systems Device [1179:fb41] Kernel driver in use: xhci_hcd 00:16.0 Communication controller [0780]: Intel Corporation Panther Point MEI Controller #1 [8086:1e3a] (rev 04) Subsystem: Toshiba America Info Systems Device [1179:fb41] Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller [0c03]: Intel Corporation Panther Point USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) Subsystem: Toshiba America Info Systems Device [1179:fb41] Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation Panther Point High Definition Audio Controller [8086:1e20] (rev 04) Subsystem: Toshiba America Info Systems Device [1179:fb40] Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge [0604]: Intel Corporation Panther Point PCI Express Root Port 1 [8086:1e10] (rev c4) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge [0604]: Intel Corporation Panther Point PCI Express Root Port 2 [8086:1e12] (rev c4) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.2 PCI bridge [0604]: Intel Corporation Panther Point PCI Express Root Port 3 [8086:1e14] (rev c4) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller [0c03]: Intel Corporation Panther Point USB Enhanced Host Controller #1 [8086:1e26] (rev 04) Subsystem: Toshiba America Info Systems Device [1179:fb41] Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge [0601]: Intel Corporation Panther Point LPC Controller [8086:1e59] (rev 04) Subsystem: Toshiba America Info Systems Device [1179:fb41] Kernel modules: iTCO_wdt 00:1f.2 SATA controller [0106]: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] [8086:1e03] (rev 04) Subsystem: Toshiba America Info Systems Device [1179:fb41] Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation Panther Point SMBus Controller [8086:1e22] (rev 04) Subsystem: Toshiba America Info Systems Device [1179:fb41] Kernel modules: i2c-i801 02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter [10ec:8176] (rev 01) Subsystem: Realtek Semiconductor Co., Ltd. Device [10ec:8211] Kernel driver in use: rtl8192ce Kernel modules: rtl8192ce 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) Subsystem: Toshiba America Info Systems Device [1179:fb37] Kernel driver in use: r8169 Kernel modules: r8169 lsmod Module Size Used by snd_hda_codec_hdmi 32474 1 snd_hda_codec_realtek 224066 1 joydev 17693 0 rfcomm 47604 0 bnep 18281 2 bluetooth 180104 10 rfcomm,bnep parport_pc 32866 0 ppdev 17113 0 arc4 12529 2 snd_hda_intel 33773 3 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq psmouse 87692 0 serio_raw 13211 0 rtl8192ce 84826 0 rtl8192c_common 75767 1 rtl8192ce rtlwifi 111202 1 rtl8192ce mac80211 506816 3 rtl8192ce,rtl8192c_common,rtlwifi snd 78855 16 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device sparse_keymap 13890 0 uvcvideo 72627 0 videodev 98259 1 uvcvideo v4l2_compat_ioctl32 17128 1 videodev mac_hid 13253 0 mei 41616 0 wmi 19256 0 soundcore 15091 1 snd i915 472941 3 snd_page_alloc 18529 2 snd_hda_intel,snd_pcm drm_kms_helper 46978 1 i915 cfg80211 205544 2 rtlwifi,mac80211 drm 242038 4 i915,drm_kms_helper i2c_algo_bit 13423 1 i915 video 19596 1 i915 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp r8169 62099 0 ums_realtek 18248 0 uas 18180 0 usb_storage 49198 1 ums_realtek dmesg | grep firmware [ 15.692951] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 16.240881] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 452.419288] rtl8192c_common:rtl92c_firmware_selfreset(): 8051 reset fail. [ 458.572211] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 465.440640] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 472.337617] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 479.175471] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 485.978582] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 492.764893] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 499.579348] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 506.386934] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 513.209545] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 519.991365] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 526.778375] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 533.629695] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 540.426004] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 547.238125] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 554.024434] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 560.854794] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 567.678160] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 574.494666] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 581.336653] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 588.157710] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 595.221122] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 602.047429] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 608.829534] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 615.639079] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 622.454991] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 629.273231] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 636.056613] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 642.858096] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 649.640753] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 657.184094] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 664.008018] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 670.838639] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 677.675418] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 684.507255] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 691.310994] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 698.095325] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 704.914509] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 711.725178] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin uname -r 3.2.0-29-generic ifconfig eth0 Link encap:Ethernet HWaddr 4c:72:b9:59:6c:61 inet addr:192.168.0.11 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::4e72:b9ff:fe59:6c61/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4447 errors:0 dropped:0 overruns:0 frame:0 TX packets:2762 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3671147 (3.6 MB) TX bytes:335133 (335.1 KB) Interrupt:42 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:515 errors:0 dropped:0 overruns:0 frame:0 TX packets:515 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:83153 (83.1 KB) TX bytes:83153 (83.1 KB) wlan0 Link encap:Ethernet HWaddr 74:e5:43:32:47:95 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:280 errors:0 dropped:0 overruns:0 frame:0 TX packets:51 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:32958 (32.9 KB) TX bytes:10431 (10.4 KB)

  Read the article

• DVD not detected?

  - by Benjamin

  As i insert a DVD in my drive (on a laptop) using Kubuntu 12.04, the DVD is not detected. The drive takes the DVD, I can hear it munching on it for a while, and then nothing. Even ejecting the DVD becomes a hassle, I need to do that at boot time otherwise the OS won't allow me to eject. Kubuntu 12.04 used to read and mount the same DVDs just fine a week ago. Edit: since I am able to boot from CD, can I safely assume the issue is not a hardware issue? How can I fix this? wodim --devices returns: wodim: Overview of accessible drives (1 found) : ------------------------------------------------------------------------- 0 dev='/dev/sg1' rwrw-- : 'Optiarc' 'DVD+-RW AD-7640A' ------------------------------------------------------------------------- sudo lshw -class disk returns: *-cdrom description: DVD-RAM writer product: DVD+-RW AD-7640A vendor: Optiarc physical id: 0.0.0 bus info: scsi@3:0.0.0 logical name: /dev/cdrom2 logical name: /dev/cdrw2 logical name: /dev/dvd2 logical name: /dev/dvdrw2 logical name: /dev/sr0 version: JD06 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=open lspci returns: 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c) 00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 0c) 00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03) 00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3) 00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 03) 00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03) 06:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) 07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) 08:05.0 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) 08:05.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 02) 08:05.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 01) and lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 0c45:63e0 Microdia Sonix Integrated Webcam Bus 003 Device 002: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader The /etc/modprobe.d/blacklist.conf contains: # This file lists those modules which we don't want to be loaded by # alias expansion, usually so some other driver will be loaded for the # device instead. # evbug is a debug tool that should be loaded explicitly blacklist evbug # these drivers are very simple, the HID drivers are usually preferred blacklist usbmouse blacklist usbkbd # replaced by e100 blacklist eepro100 # replaced by tulip blacklist de4x5 # causes no end of confusion by creating unexpected network interfaces blacklist eth1394 # snd_intel8x0m can interfere with snd_intel8x0, doesn't seem to support much # hardware on its own (Ubuntu bug #2011, #6810) blacklist snd_intel8x0m # Conflicts with dvb driver (which is better for handling this device) blacklist snd_aw2 # causes failure to suspend on HP compaq nc6000 (Ubuntu: #10306) blacklist i2c_i801 # replaced by p54pci blacklist prism54 # replaced by b43 and ssb. blacklist bcm43xx # most apps now use garmin usb driver directly (Ubuntu: #114565) blacklist garmin_gps # replaced by asus-laptop (Ubuntu: #184721) blacklist asus_acpi # low-quality, just noise when being used for sound playback, causes # hangs at desktop session start (Ubuntu: #246969) blacklist snd_pcsp # ugly and loud noise, getting on everyone's nerves; this should be done by a # nice pulseaudio bing (Ubuntu: #77010) blacklist pcspkr # EDAC driver for amd76x clashes with the agp driver preventing the aperture # from being initialised (Ubuntu: #297750). Blacklist so that the driver # continues to build and is installable for the few cases where its # really needed. blacklist amd76x_edac

  Read the article

• I have a problem with a AE1200 Cisco/Linksys Wireless-N USB adapter having stopped working after I ran the update manager in Ubuntu 12.04

  - by user69670

  Here is the problem, I use a Cisco/Linksys AE1200 wireless network adapter to connect my desktop to a public wifi internet connection. I use ndiswrapper to use the windows driver and it had been working fine for me untill I ran the update manager overnight a few days ago. When I woke up it was asking for the normal computer restart to implement the changes but after rebooting the computer, the wireless adapter did not work, the status light on the adapter did not light up even though ubuntu recognizes it is there and according to ndiswrapper the drivers are loaded and the hardware is present. the grep command is being a bitch for some unknown reason today so this will be long sorry Output from "lspci": 00:00.0 Host bridge: Advanced Micro Devices [AMD] nee ATI Radeon Xpress 200 Host Bridge (rev 01) 00:01.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RS480 PCI Bridge 00:12.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB600 Non-Raid-5 SATA 00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI0) 00:13.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI1) 00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI2) 00:13.3 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI3) 00:13.4 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI4) 00:13.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB Controller (EHCI) 00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 13) 00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB600 IDE 00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB600 PCI to LPC Bridge 00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge 01:05.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RC410 [Radeon Xpress 200] 02:02.0 Communication controller: Conexant Systems, Inc. HSF 56k Data/Fax Modem 02:03.0 Multimedia audio controller: Creative Labs CA0106 Soundblaster 02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Output from "lsusb": Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 009: ID 13b1:0039 Linksys AE1200 802.11bgn Wireless Adapter [Broadcom BCM43235] Bus 003 Device 002: ID 045e:0053 Microsoft Corp. Optical Mouse Bus 004 Device 002: ID 1043:8006 iCreate Technologies Corp. Flash Disk 32-256 MB Output from "ifconfig": eth0 Link encap:Ethernet HWaddr 00:19:21:b6:af:7c UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:20 Base address:0xb400 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:13232 errors:0 dropped:0 overruns:0 frame:0 TX packets:13232 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1084624 (1.0 MB) TX bytes:1084624 (1.0 MB) Output from "iwconfig": lo no wireless extensions. eth0 no wireless extensions. Output from "lsmod": Module Size Used by nls_iso8859_1 12617 1 nls_cp437 12751 1 vfat 17308 1 fat 55605 1 vfat uas 17828 0 usb_storage 39646 1 nls_utf8 12493 1 udf 84366 1 crc_itu_t 12627 1 udf snd_ca0106 39279 2 snd_ac97_codec 106082 1 snd_ca0106 ac97_bus 12642 1 snd_ac97_codec snd_pcm 80845 2 snd_ca0106,snd_ac97_codec rfcomm 38139 0 snd_seq_midi 13132 0 snd_rawmidi 25424 2 snd_ca0106,snd_seq_midi bnep 17830 2 parport_pc 32114 0 bluetooth 158438 10 rfcomm,bnep ppdev 12849 0 snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event snd_timer 28931 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq snd 62064 11 snd_ca0106, snd_ac97_codec,snd_pcm,snd_rawj9fe snd_ca0106,snd_ac97_codec,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 14635 1 snd snd_page_alloc 14108 2 snd_ca0106,snd_pcm sp5100_tco 13495 0 i2c_piix4 13093 0 radeon 733693 3 ttm 65344 1 radeon drm_kms_helper 45466 1 radeon drm 197692 5 radeon,ttm,drm_kms_helper i2c_algo_bit 13199 1 radeon mac_hid 13077 0 shpchp 32325 0 ati_agp 13242 0 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp usbhid 41906 0 hid 77367 1 usbhid 8139too 23283 0 8139cp 26759 0 pata_atiixp 12999 1 Output from "sudo lshw -C network": *-network description: Ethernet interface product: RTL-8139/8139C/8139C+ vendor: Realtek Semiconductor Co., Ltd. physical id: 5 bus info: pci@0000:02:05.0 logical name: eth0 version: 10 serial: 00:19:21:b6:af:7c size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 10 0bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=half latency=64 link=no maxlatency=64 mingnt=32 multicast=yes port=MII speed=10Mbit/s resources: irq:20 ioport:b400(size=256) memory:ff5fdc00-ff5fdcff Output from "iwlist scan": lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. Output from "lsb_release -d": Ubuntu 12.04 LTS Output from "uname -mr": 3.2.0-24-generic-pae i686 Output from "sudo /etc/init.d/networking restart": * Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces * Reconfiguring network interfaces... [ OK ]

  Read the article

• Wireless Problem on Acer Aspire 5610z

  - by Ugur Can Yalaki

  I installed ubuntu 12.04 on my machine, but I can't get wireless connection to work. My computer is Acer Aspire 5610z. I found that some other people that have same computer, face the same problem. Here is some information about it: ****** info trace ****** * uname -a * Linux ucy-Aspire-5610Z 3.8.0-32-generic #47~precise1-Ubuntu SMP Wed Oct 2 16:22:28 UTC 2013 i686 i686 i386 GNU/Linux * lsb_release * Distributor ID: Ubuntu Description: Ubuntu 12.04.3 LTS Release: 12.04 Codename: precise * lspci * 05:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [14e4:4311] (rev 01) Subsystem: AMBIT Microsystem Corp. Device [1468:0422] Kernel driver in use: b43-pci-bridge 06:01.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX [14e4:170c] (rev 02) Subsystem: Acer Incorporated [ALI] Device [1025:0090] Kernel driver in use: b44 * lsusb * Bus 001 Device 004: ID 04e8:6863 Samsung Electronics Co., Ltd Bus 001 Device 002: ID 5986:0100 Acer, Inc Orbicam Bus 002 Device 002: ID 046d:c52f Logitech, Inc. Wireless Mouse M305 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub * PCMCIA Card Info * PRODID_1="" PRODID_2="" PRODID_3="" PRODID_4="" MANFID=0000,0000 FUNCID=255 * iwconfig * * rfkill * 0: acer-wireless: Wireless LAN Soft blocked: no Hard blocked: no * lsmod * ssb_hcd 12781 0 ssb 51554 2 ssb_hcd,b44 * nm-tool * NetworkManager Tool State: connected (global) Device: usb0 [Wired connection 2] ------------------------------------------- Type: Wired Driver: rndis_host State: connected Default: yes HW Address: Capabilities: Carrier Detect: yes Wired Properties Carrier: on IPv4 Settings: Address: 192.168.42.7 Prefix: 24 (255.255.255.0) Gateway: 192.168.42.129 DNS: 192.168.42.129 IPv6 Settings: Address: ::a05d:a1ff:fea4:1738 Prefix: 64 Gateway: fe80::504d:76ff:fe86:db04 Address: fe80::a05d:a1ff:fea4:1738 Prefix: 64 Gateway: fe80::504d:76ff:fe86:db04 DNS: fe80::504d:76ff:fe86:db04 Device: eth2 ----------------------------------------------------------------- Type: Wired Driver: b44 State: unavailable Default: no HW Address: Capabilities: Carrier Detect: yes Wired Properties Carrier: off * NetworkManager.state * [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true * NetworkManager.conf * [main] plugins=ifupdown,keyfile dns=dnsmasq [ifupdown] managed=false * interfaces * auto lo iface lo inet loopback * iwlist * * resolv.conf * nameserver 127.0.0.1 * blacklist * [/etc/modprobe.d/blacklist-ath_pci.conf] blacklist ath_pci [/etc/modprobe.d/blacklist-bcm43.conf] blacklist b43 blacklist b43legacy blacklist ssb blacklist bcm43xx blacklist brcm80211 blacklist brcmfmac blacklist brcmsmac blacklist bcma [/etc/modprobe.d/blacklist.conf] blacklist evbug blacklist usbmouse blacklist usbkbd blacklist eepro100 blacklist de4x5 blacklist eth1394 blacklist snd_intel8x0m blacklist snd_aw2 blacklist i2c_i801 blacklist prism54 blacklist bcm43xx blacklist garmin_gps blacklist asus_acpi blacklist snd_pcsp blacklist pcspkr blacklist amd76x_edac * modinfo * filename: /lib/modules/3.8.0-32-generic/kernel/drivers/usb/host/ssb-hcd.ko license: GPL description: Common USB driver for SSB Bus author: Hauke Mehrtens srcversion: E127A51EDC8F44D2C2A8F15 alias: ssb:v4243id0819rev* alias: ssb:v4243id0817rev* alias: ssb:v4243id0808rev* depends: ssb intree: Y vermagic: 3.8.0-32-generic SMP mod_unload modversions 686 filename: /lib/modules/3.8.0-32-generic/kernel/drivers/ssb/ssb.ko license: GPL description: Sonics Silicon Backplane driver srcversion: 14621F6EC014F731244437C alias: pci:v000014E4d00004350sv*sd*bc*sc*i* alias: pci:v000014E4d0000432Csv*sd*bc*sc*i* alias: pci:v000014E4d0000432Bsv*sd*bc*sc*i* alias: pci:v000014E4d00004329sv*sd*bc*sc*i* alias: pci:v000014E4d00004328sv*sd*bc*sc*i* alias: pci:v000014E4d00004325sv*sd*bc*sc*i* alias: pci:v000014E4d00004324sv*sd*bc*sc*i* alias: pci:v000014E4d0000A8D6sv*sd*bc*sc*i* alias: pci:v000014E4d00004322sv*sd*bc*sc*i* alias: pci:v000014E4d00004321sv*sd*bc*sc*i* alias: pci:v000014E4d00004320sv*sd*bc*sc*i* alias: pci:v000014E4d00004319sv*sd*bc*sc*i* alias: pci:v000014A4d00004318sv*sd*bc*sc*i* alias: pci:v000014E4d00004318sv*sd*bc*sc*i* alias: pci:v000014E4d00004315sv*sd*bc*sc*i* alias: pci:v000014E4d00004312sv*sd*bc*sc*i* alias: pci:v000014E4d00004311sv*sd*bc*sc*i* alias: pci:v000014E4d00004307sv*sd*bc*sc*i* alias: pci:v000014E4d00004306sv*sd*bc*sc*i* alias: pci:v000014E4d00004301sv*sd*bc*sc*i* depends: intree: Y vermagic: 3.8.0-32-generic SMP mod_unload modversions 686 * udev rules * PCI device 0x14e4:/sys/devices/pci0000:00/0000:00:1e.0/0000:06:01.0/ssb1:0 (b44) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0" PCI device 0x14e4:/sys/devices/pci0000:00/0000:00:1e.0/0000:06:01.0/ssb2:0 (b44) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1" PCI device 0x14e4:/sys/devices/pci0000:00/0000:00:1e.0/0000:06:01.0/ssb3:0 (b44) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth2" * dmesg * [ 2.385241] ssb: Found chip with id 0x4311, rev 0x01 and package 0x00 [ 2.385256] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243) [ 2.385266] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243) [ 2.385276] ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243) [ 2.385286] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243) [ 2.448147] ssb: Sonics Silicon Backplane found on PCI device 0000:05:00.0 [ 2.468112] ssb: Found chip with id 0x4401, rev 0x02 and package 0x00 [ 2.468124] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243) [ 2.468132] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243) [ 2.468140] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243) [ 2.508230] ssb: Sonics Silicon Backplane found on PCI device 0000:06:01.0 [ 2.528620] b44 ssb1:0 eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver ******** done ******** Thank you already for your help.

  Read the article

• USB external drive is not recognized by any OS, how to troubleshoot in Ubuntu?

  - by Breno

  First of all I would like to inform you that I saw a question similar to mine but the error was different, so here's my problem... I have an external HD samsung s2 model of 500GB and a day to day just stopped working, tried in other systems (windows and mac) however are not recognized. In the windows device manager when I insert the usb it states that the device in question are not working properly. Well, in the logs of my ubuntu 4.12 I see the following message when I insert my usb device in: [ 2967.560216] usb 7-2: new full-speed USB device number 2 using uhci_hcd [ 2967.680182] usb 7-2: device descriptor read/64, error -71 [ 2967.904176] usb 7-2: device descriptor read/64, error -71 [ 2968.120227] usb 7-2: new full-speed USB device number 3 using uhci_hcd [ 2968.240207] usb 7-2: device descriptor read/64, error -71 [ 2968.464063] usb 7-2: device descriptor read/64, error -71 [ 2968.680087] usb 7-2: new full-speed USB device number 4 using uhci_hcd [ 2969.092085] usb 7-2: device not accepting address 4, error -71 [ 2969.208155] usb 7-2: new full-speed USB device number 5 using uhci_hcd [ 2969.624076] usb 7-2: device not accepting address 5, error -71 [ 2969.624118] hub 7-0:1.0: unable to enumerate USB device on port 2 [ 4520.240340] usb 7-1: new full-speed USB device number 6 using uhci_hcd [ 4520.364079] usb 7-1: device descriptor read/64, error -71 [ 4520.588109] usb 7-1: device descriptor read/64, error -71 [ 4520.804140] usb 7-1: new full-speed USB device number 7 using uhci_hcd [ 4520.924136] usb 7-1: device descriptor read/64, error -71 [ 4521.148083] usb 7-1: device descriptor read/64, error -71 [ 4521.364105] usb 7-1: new full-speed USB device number 8 using uhci_hcd [ 4521.776237] usb 7-1: device not accepting address 8, error -71 [ 4521.888206] usb 7-1: new full-speed USB device number 9 using uhci_hcd [ 4522.296102] usb 7-1: device not accepting address 9, error -71 [ 4522.296150] hub 7-0:1.0: unable to enumerate USB device on port 1 [ 4749.036104] usb 7-2: new full-speed USB device number 10 using uhci_hcd [ 4749.156209] usb 7-2: device descriptor read/64, error -71 [ 4749.380215] usb 7-2: device descriptor read/64, error -71 [ 4749.596206] usb 7-2: new full-speed USB device number 11 using uhci_hcd [ 4749.716409] usb 7-2: device descriptor read/64, error -71 [ 4749.940110] usb 7-2: device descriptor read/64, error -71 [ 4750.156257] usb 7-2: new full-speed USB device number 12 using uhci_hcd [ 4750.572150] usb 7-2: device not accepting address 12, error -71 [ 4750.684215] usb 7-2: new full-speed USB device number 13 using uhci_hcd [ 4751.100182] usb 7-2: device not accepting address 13, error -71 [ 4751.100224] hub 7-0:1.0: unable to enumerate USB device on port 2 Here is my system: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 002: ID 08ff:2810 AuthenTec, Inc. AES2810 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 2 port SATA Controller [IDE mode] (rev 02) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) 00:1f.5 IDE interface: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 2 port SATA Controller [IDE mode] (rev 02) 02:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba) 02:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04) 02:01.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21) 09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5756ME Gigabit Ethernet PCI Express 0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) Does anyone have any clue what would be the problem?

  Read the article

• Atheros Wireless card shows up as two different models?

  - by geermc4

  Hi I've been fighting these wireless drivers for a few days and just recently i noticed that the model the Wireless controller appears in lspci is different sometimes. This is the data i have after installing Ubuntu Server 64 bit ~# lspci -k .... 04:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) Subsystem: AzureWave Device 1d89 Kernel driver in use: ath9k Kernel modules: ath9k ran some updates, restarted, all was good, all though it did say that linux-headers-server linux-image-server linux-server where beeing kept back. After that i installed ubuntu-desktop (aptitude install ubuntu-desktop --without-recommends) restarted and not only is the wireless not working anymore, but the hardware is listed as a different card ~# lspci -k .... 04:00.0 Ethernet controller: Atheros Communications Inc. AR5008 Wireless Network Adapter (rev 01) has no available drivers for it, still i tried to modprobe ath9k, they show up in lsmod as loaded, but still iw list shows nothing. this is what it looked like before the ubuntu-desktop instalation Wiphy phy0 Band 1: Capabilities: 0x11ce HT20/HT40 SM Power Save disabled RX HT40 SGI TX STBC RX STBC 1-stream Max AMSDU length: 3839 bytes DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 8 usec (0x06) HT TX/RX MCS rate indexes supported: 0-7 Frequencies: * 2412 MHz [1] (14.0 dBm) * 2417 MHz [2] (15.0 dBm) * 2422 MHz [3] (15.0 dBm) * 2427 MHz [4] (15.0 dBm) * 2432 MHz [5] (15.0 dBm) * 2437 MHz [6] (15.0 dBm) * 2442 MHz [7] (15.0 dBm) * 2447 MHz [8] (15.0 dBm) * 2452 MHz [9] (15.0 dBm) * 2457 MHz [10] (15.0 dBm) * 2462 MHz [11] (15.0 dBm) * 2467 MHz [12] (15.0 dBm) (passive scanning) * 2472 MHz [13] (14.0 dBm) (passive scanning) * 2484 MHz [14] (17.0 dBm) (passive scanning) Bitrates (non-HT): * 1.0 Mbps * 2.0 Mbps (short preamble supported) * 5.5 Mbps (short preamble supported) * 11.0 Mbps (short preamble supported) * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps max # scan SSIDs: 4 max scan IEs length: 2257 bytes Coverage class: 0 (up to 0m) Supported Ciphers: * WEP40 (00-0f-ac:1) * WEP104 (00-0f-ac:5) * TKIP (00-0f-ac:2) * CCMP (00-0f-ac:4) * CMAC (00-0f-ac:6) Available Antennas: TX 0x1 RX 0x3 Configured Antennas: TX 0x1 RX 0x3 Supported interface modes: * IBSS * managed * AP * AP/VLAN * WDS * monitor * mesh point * P2P-client * P2P-GO software interface modes (can always be added): * AP/VLAN * monitor interface combinations are not supported Supported commands: * new_interface * set_interface * new_key * new_beacon * new_station * new_mpath * set_mesh_params * set_bss * authenticate * associate * deauthenticate * disassociate * join_ibss * join_mesh * remain_on_channel * set_tx_bitrate_mask * action * frame_wait_cancel * set_wiphy_netns * set_channel * set_wds_peer * connect * disconnect Supported TX frame types: * IBSS: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * managed: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * AP: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * AP/VLAN: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * mesh point: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * P2P-client: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * P2P-GO: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 Supported RX frame types: * IBSS: 0x00d0 * managed: 0x0040 0x00d0 * AP: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0 * AP/VLAN: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0 * mesh point: 0x00b0 0x00c0 0x00d0 * P2P-client: 0x0040 0x00d0 * P2P-GO: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0 Device supports RSN-IBSS. What's with the hardware change? If it has 2, how can i make the AR9285 always load and disable AR5008, or, is it the same and it's just showing it different? :| Oh and I've tried this on Ubuntu 10.04 server, xubuntu 12.04, ubuntu 12.04 desktop and server. Thanks in advanced. -- Here's some more info, i have it setup in 2 hard drives, 1 works and the other one i'm using to figure it out The one that works... # lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 06 serial: 54:04:a6:a3:3b:96 size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-2.fw ip=192.168.2.147 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s resources: irq:43 ioport:e000(size=256) memory:d0004000-d0004fff memory:d0000000-d0003fff *-network description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 logical name: wlan0 version: 01 serial: 74:2f:68:4a:26:73 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-18-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:18 memory:fea00000-fea0ffff Here's where it doesn't # lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 06 serial: 54:04:a6:a3:3b:96 size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-2.fw ip=192.168.2.160 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s resources: irq:43 ioport:e000(size=256) memory:d0004000-d0004fff memory:d0000000-d0003fff *-network UNCLAIMED description: Ethernet controller product: AR5008 Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:fea00000-fea0ffff Update I've noticed that if i blacklist the ath9k and ath9k_common modules lspci gives me the AR9285, but then I need to modprobe ath9k for it to work, does this make any sense? If so, why?

  Read the article

• How to increase signal/range of your Wi-Fi antenna-less repeater/booster over the network?

  - by kenorb

  I've BT Home Hub in the upper flat (2-3 walls behind) and I'm using WPS Wireless-N Wifi Range Router Repeater Extender in my flat where I'm using my laptop. These are antenna-less devices. Are there any life-hack tricks to increase signal/range of my repeater without buying the new more powerful repeater? I've tried already to move my repeater closer to the ceiling or putting the aluminium foil underneath, but it didn't help. Are there any methods, specific plates or materials which can boost the signal? Specification: Model: WN518W2 Frequency range: 2.4-2.4835GHz Wireless transmit power: 14 ~17 dBm (Typical) Wireless Signal Rates With Automatic Fallback: 11n: Up to 300Mbps(dynamic), 11g: Up to 54Mbps(dynamic), 11b: Up to 11Mbps(dynamic) Modulation Technology: DBPSK, DQPSK, CCK, OFDM, 16-QAM, 64-QAM Receiver Sensitivity: 300M: -68dBm@10% PER / 150M: -68dBm@10% PER / 108M: -68dBm@10% PER / 54M: -68dBm@10% PER / 11M: -85dBm@8% PER / 6M: -88dBm@10% PER / 1M: -90dBm@8% PER Product dimensions: 11 * 6 * 7cm

  Read the article

• ** EDITED ** 'NoneType' object has no attribute 'day'

  - by Asinox

  Hi guy, i dont know where is my error, but Django 1.2.1 is give this error: 'NoneType' object has no attribute 'day' when i try to save form from the Administrator Area models.py from django.db import models from django.contrib.auth.models import User class Editorial(models.Model): titulo = models.CharField(max_length=250,help_text='Titulo del editorial') editorial = models.TextField(help_text='Editorial') slug = models.SlugField(unique_for_date='pub_date') autor = models.ForeignKey(User) pub_date = models.DateTimeField(auto_now_add=True) activa = models.BooleanField(verbose_name="Activa") enable_comments = models.BooleanField(verbose_name="Aceptar Comentarios",default=False) editorial_html = models.TextField(editable=False,blank=True) def __unicode__(self): return unicode(self.titulo) def get_absolute_url(self): return "/editorial/%s/%s/" % (self.pub_date.strftime("%Y/%b/%d").lower(), self.slug) class Meta: ordering=['-pub_date'] verbose_name_plural ='Editoriales' def save(self,force_insert=False, force_update=False): from markdown import markdown if self.editorial: self.editorial_html = markdown(self.editorial) super(Editorial,self).save(force_insert,force_update) i dont know why this error, COMPLETED ERROR: Traceback: File "C:\wamp\bin\Python26\lib\site-packages\django\core\handlers\base.py" in get_response 100. response = callback(request, *callback_args, **callback_kwargs) File "C:\wamp\bin\Python26\lib\site-packages\django\contrib\admin\options.py" in wrapper 239. return self.admin_site.admin_view(view)(*args, **kwargs) File "C:\wamp\bin\Python26\lib\site-packages\django\utils\decorators.py" in _wrapped_view 76. response = view_func(request, *args, **kwargs) File "C:\wamp\bin\Python26\lib\site-packages\django\views\decorators\cache.py" in _wrapped_view_func 69. response = view_func(request, *args, **kwargs) File "C:\wamp\bin\Python26\lib\site-packages\django\contrib\admin\sites.py" in inner 190. return view(request, *args, **kwargs) File "C:\wamp\bin\Python26\lib\site-packages\django\utils\decorators.py" in _wrapper 21. return decorator(bound_func)(*args, **kwargs) File "C:\wamp\bin\Python26\lib\site-packages\django\utils\decorators.py" in _wrapped_view 76. response = view_func(request, *args, **kwargs) File "C:\wamp\bin\Python26\lib\site-packages\django\utils\decorators.py" in bound_func 17. return func(self, *args2, **kwargs2) File "C:\wamp\bin\Python26\lib\site-packages\django\db\transaction.py" in _commit_on_success 299. res = func(*args, **kw) File "C:\wamp\bin\Python26\lib\site-packages\django\contrib\admin\options.py" in add_view 777. if form.is_valid(): File "C:\wamp\bin\Python26\lib\site-packages\django\forms\forms.py" in is_valid 121. return self.is_bound and not bool(self.errors) File "C:\wamp\bin\Python26\lib\site-packages\django\forms\forms.py" in _get_errors 112. self.full_clean() File "C:\wamp\bin\Python26\lib\site-packages\django\forms\forms.py" in full_clean 269. self._post_clean() File "C:\wamp\bin\Python26\lib\site-packages\django\forms\models.py" in _post_clean 345. self.validate_unique() File "C:\wamp\bin\Python26\lib\site-packages\django\forms\models.py" in validate_unique 354. self.instance.validate_unique(exclude=exclude) File "C:\wamp\bin\Python26\lib\site-packages\django\db\models\base.py" in validate_unique 695. date_errors = self._perform_date_checks(date_checks) File "C:\wamp\bin\Python26\lib\site-packages\django\db\models\base.py" in _perform_date_checks 802. lookup_kwargs['%s__day' % unique_for] = date.day Exception Type: AttributeError at /admin/editoriales/editorial/add/ Exception Value: 'NoneType' object has no attribute 'day' thanks guys sorry with my English

  Read the article

• Teamviewer: cannot control monitor 1, but can control monitor 2

  - by DaveT

  I'm using the web client of Teamviewer from my work computer trying to control my home computer. I have 2 monitors on the remote desktop, but for some reason only have control on the second monitor. When I switch to the main monitor (monitor 1), I cannot do anything and cannot even move the cursor. But I have no issues when I switch over to the second monitor (monitor 2). I used to have no issues with either, but in the past couple of months this has been causing me issues. Anyone have a suggestion? Thanks!! Also... Here is the log from the Teamviewer session. Showing me switching back and forth between the monitors. (just in case this will help). I had to remove the links in order to post the log since I don't have enough reputation points, but they were just teamviewer login weblinks. =============================================================================== 21.08 16:00:41,176: Version: 9.0.15099 21.08 16:00:41,177: Sandbox: remote 21.08 16:00:41,177: SysLanguage: en 21.08 16:00:41,177: VarLanguage: en 21.08 16:00:41,177: Flash Player: PlugIn (WIN 14,0,0,179) 21.08 16:00:41,178: UseLanguage: en 21.08 16:00:41,178: UseLanguage: en 21.08 16:00:41,182: TeamViewer hasPassword: true 21.08 16:00:41,418: ExternalConnect id=910035824 21.08 16:00:41,419: CT connect 910035824 masterURL: , sandbox = remote 21.08 16:00:41,425: MC.requestRoute(910035824) 21.08 16:00:41,426: MC.sendMasterCommand text=F=RequestRoute2&ID1=777&Client=TV& ID2=910035824&SA_AccountID=26641022&SA_PasswordMD5HashBase64Encoded=& SA_SessionSecret=f7H6Z7SYfX5ahQ7SJq/r/K20PBYg9fOZhp+DKLhf5ts=&SA_SessionID=1558929948& V=9.0.15099&OS=Flash 21.08 16:00:41,426: MC wait for ping completion 21.08 16:00:42,064: PS.socket event: [Event type="connect" bubbles=false cancelable=false eventPhase=2] 21.08 16:00:42,182: PingThread: TCP-Ping ok 21.08 16:00:42,183: MC.socket mode = TCP, MasterURL: 21.08 16:00:42,183: MC.connect: 21.08 16:00:43,058: PS.socket event: [Event type="connect" bubbles=false cancelable=false eventPhase=2] 21.08 16:00:43,058: MC.connectHandler: [Event type="connect" bubbles=false cancelable=false eventPhase=2] 21.08 16:00:43,236: MC.requestRouteResponse: [email protected]_10800_128000_762319420_910035824_10000__1_0_16778176_128000_16778176: 128000;2147483647:1280000;4:640000_786297_786297 21.08 16:00:43,239: CT init socket: TCP 21.08 16:00:43,513: PS.socket event: [Event type="connect" bubbles=false cancelable=false eventPhase=2] 21.08 16:00:43,514: CT.connectHandler: [Event type="connect" bubbles=false cancelable=false eventPhase=2] 21.08 16:00:43,519: Browser name: Netscape 21.08 16:00:43,936: CMD_IDENTIFY id=910035824 ver=2.41 21.08 16:00:44,666: CMD_CONFIRMENCRYPTION: encryption confirmed 21.08 16:00:44,667: Started resendrequest timer 21.08 16:00:45,063: Remote Version: TV 009.000 21.08 16:00:45,501: start classic authentication 21.08 16:00:45,502: Login::SendRequestToConsole(): url= 21.08 16:00:45,828: start srp authentication 21.08 16:00:46,983: checkFirstPacket ok, m_LastReceivedPacketID =4 21.08 16:00:47,148: Login::SendRequestToConsole(): url= 21.08 16:00:47,478: start srp authentication 21.08 16:00:48,210: Login::SendRequestToConsole(): url= 21.08 16:00:48,485: checkFirstPacket ok, m_LastReceivedPacketID =7 21.08 16:00:48,780: TVCmdAuthenticate_Authenticated: 1 21.08 16:00:49,321: Connected to 910035824, name=NEWMAN, os=14, version=9.0.31064 21.08 16:00:49,329: ConnectionAccessSettings: RemoteControl: AllowedFileTransfer: AllowedControlRemoteTV: AllowedSwitchSides: DeniedAllowDisableRemoteInput: AllowedAllowVPN: AllowedAllowPartnerViewDesktop: Allowed 21.08 16:00:52,195: unexpected TVCommand.CommandType == 56 21.08 16:00:52,231: CW received display params: 1680x1050x8 monitors: 2 (active:0) 21.08 16:00:52,301: Caching active, version=2 21.08 16:03:47,158: CW received display params: 1680x1050x8 monitors: 2 (active:1) 21.08 16:04:24,447: CW received display params: 1680x1050x8 monitors: 2 (active:0) 21.08 16:04:40,609: CW received display params: 3360x1050x8 monitors: 2 (active:-1) 21.08 16:04:59,802: CW received display params: 1680x1050x8 monitors: 2 (active:1) 21.08 16:04:59,933: CW received display params: 1680x1050x8 monitors: 2 (active:1) 21.08 16:05:58,419: CW received display params: 1680x1050x8 monitors: 2 (active:0) 21.08 16:06:36,824: CW received display params: 1680x1050x8 monitors: 2 (active:1) 21.08 16:07:07,232: CW received display params: 1680x1050x8 monitors: 2 (active:0)

  Read the article

• Sign an OpenSSL .CSR with Microsoft Certificate Authority

  - by kce

  I'm in the process of building a Debian FreeRadius server that does 802.1x authentication for domain members. I would like to sign my radius server's SSL certificate (used for EAP-TLS) and leverage the domain's existing PKI. The radius server is joined to domain via Samba and has a machine account as displayed in Active Directory Users and Computers. The domain controller I'm trying to sign my radius server's key against does not have IIS installed so I can't use the preferred Certsrv webpage to generate the certificate. The MMC tools won't work as it can't access the certificate stores on the radius server because they don't exist. This leaves the certreq.exe utility. I'm generating my .CSR with the following command: openssl req -nodes -newkey rsa:1024 -keyout server.key -out server.csr The resulting .CSR: ******@mis-ke-lnx:~/G$ openssl req -text -noout -in mis-radius-lnx.csr Certificate Request: Data: Version: 0 (0x0) Subject: C=US, ST=Alaska, L=CITY, O=ORG, OU=DEPT, CN=ME/emailAddress=MYEMAIL Subject Public Key Info: Public Key Algorithm: rsaEncryption RSA Public Key: (1024 bit) Modulus (1024 bit): 00:a8:b3:0d:4b:3f:fa:a4:5f:78:0c:24:24:23:ac: cf:c5:28:af:af:a2:9b:07:23:67:4c:77:b5:e8:8a: 08:2e:c5:a3:37:e1:05:53:41:f3:4b:e1:56:44:d2: 27:c6:90:df:ae:3b:79:e4:20:c2:e4:d1:3e:22:df: 03:60:08:b7:f0:6b:39:4d:b4:5e:15:f7:1d:90:e8: 46:10:28:38:6a:62:c2:39:80:5a:92:73:37:85:37: d3:3e:57:55:b8:93:a3:43:ac:2b:de:0f:f8:ab:44: 13:8e:48:29:d7:8d:ce:e2:1d:2a:b7:2b:9d:88:ea: 79:64:3f:9a:7b:90:13:87:63 Exponent: 65537 (0x10001) Attributes: a0:00 Signature Algorithm: sha1WithRSAEncryption 35:57:3a:ec:82:fc:0a:8b:90:9a:11:6b:56:e7:a8:e4:91:df: 73:1a:59:d6:5f:90:07:83:46:aa:55:54:1c:f9:28:3e:a6:42: 48:0d:6b:da:58:e4:f5:7f:81:ee:e2:66:71:78:85:bd:7f:6d: 02:b6:9c:32:ad:fa:1f:53:0a:b4:38:25:65:c2:e4:37:00:16: 53:d2:da:f2:ad:cb:92:2b:58:15:f4:ea:02:1c:a3:1c:1f:59: 4b:0f:6c:53:70:ef:47:60:b6:87:c7:2c:39:85:d8:54:84:a1: b4:67:f0:d3:32:f4:8e:b3:76:04:a8:65:48:58:ad:3a:d2:c9: 3d:63 I'm trying to submit my certificate using the following certreq.exe command: certreq -submit -attrib "CertificateTemplate:Machine" server.csr I receive the following error upon doing so: RequestId: 601 Certificate not issued (Denied) Denied by Policy Module The DNS name is unavailable and cannot be added to the Subject Alternate name. 0x8009480f (-2146875377) Certificate Request Processor: The DNS name is unavailable and cannot be added to the Subject Alternate name. 0x8009480f (-2146875377) Denied by Policy Module My certificate authority has the following certificate templates available. If I try to submit by certreq.exe using "CertificiateTemplate:Computer" instead of "CertificateTemplate:Machine" I get an error reporting that "the requested certificate template is not supported by this CA." My google-foo has failed me so far on trying to understand this error... I feel like this should be a relatively simple task as X.509 is X.509 and OpenSSL generates the .CSRs in the required PKCS10 format. I can't be only one out there trying to sign a OpenSSL generated key on a Linux box with a Windows Certificate Authority, so how do I do this (perferably using the off-line certreq.exe tool)?

  Read the article

• Setting up RADIUS + LDAP for WPA2 on Ubuntu

  - by Morten Siebuhr

  I'm setting up a wireless network for ~150 users. In short, I'm looking for a guide to set RADIUS server to authenticate WPA2 against a LDAP. On Ubuntu. I got a working LDAP, but as it is not in production use, it can very easily be adapted to whatever changes this project may require. I've been looking at FreeRADIUS, but any RADIUS server will do. We got a separate physical network just for WiFi, so not too many worries about security on that front. Our AP's are HP's low end enterprise stuff - they seem to support whatever you can think of. All Ubuntu Server, baby! And the bad news: I now somebody less knowledgeable than me will eventually take over administration, so the setup has to be as "trivial" as possible. So far, our setup is based only on software from the Ubuntu repositories, with exception of our LDAP administration web application and a few small special scripts. So no "fetch package X, untar, ./configure"-things if avoidable. UPDATE 2009-08-18: While I found several useful resources, there is one serious obstacle: Ignoring EAP-Type/tls because we do not have OpenSSL support. Ignoring EAP-Type/ttls because we do not have OpenSSL support. Ignoring EAP-Type/peap because we do not have OpenSSL support. Basically the Ubuntu version of FreeRADIUS does not support SSL (bug 183840), which makes all the secure EAP-types useless. Bummer. But some useful documentation for anybody interested: http://vuksan.com/linux/dot1x/802-1x-LDAP.html http://tldp.org/HOWTO/html_single/8021X-HOWTO/#confradius UPDATE 2009-08-19: I ended up compiling my own FreeRADIUS package yesterday evening - there's a really good recipe at http://www.linuxinsight.com/building-debian-freeradius-package-with-eap-tls-ttls-peap-support.html (See the comments to the post for updated instructions). I got a certificate from http://CACert.org (you should probably get a "real" cert if possible) Then I followed the instructions at http://vuksan.com/linux/dot1x/802-1x-LDAP.html. This links to http://tldp.org/HOWTO/html_single/8021X-HOWTO/, which is a very worthwhile read if you want to know how WiFi security works. UPDATE 2009-08-27: After following the above guide, I've managed to get FreeRADIUS to talk to LDAP: I've created a test user in LDAP, with the password mr2Yx36M - this gives an LDAP entry roughly of: uid: testuser sambaLMPassword: CF3D6F8A92967E0FE72C57EF50F76A05 sambaNTPassword: DA44187ECA97B7C14A22F29F52BEBD90 userPassword: {SSHA}Z0SwaKO5tuGxgxtceRDjiDGFy6bRL6ja When using radtest, I can connect fine: > radtest testuser "mr2Yx36N" sbhr.dk 0 radius-private-password Sending Access-Request of id 215 to 130.225.235.6 port 1812 User-Name = "msiebuhr" User-Password = "mr2Yx36N" NAS-IP-Address = 127.0.1.1 NAS-Port = 0 rad_recv: Access-Accept packet from host 130.225.235.6 port 1812, id=215, length=20 > But when I try through the AP, it doesn't fly - while it does confirm that it figures out the NT and LM passwords: ... rlm_ldap: sambaNTPassword -> NT-Password == 0x4441343431383745434139374237433134413232463239463532424542443930 rlm_ldap: sambaLMPassword -> LM-Password == 0x4346334436463841393239363745304645373243353745463530463736413035 [ldap] looking for reply items in directory... WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? [ldap] user testuser authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] Normalizing NT-Password from hex encoding [pap] Normalizing LM-Password from hex encoding ... It is clear that the NT and LM passwords differ from the above, yet the message [ldap] user testuser authorized to use remote access - and the user is later rejected...

  Read the article

• Mpd as pppoe server with authorisation by freeradius2

  - by Korjavin Ivan

  I install freeradius2, add to raddb/users: test Cleartext-Password := "test1" Service-Type = Framed-User, Framed-Protocol = PPP, Framed-IP-Address = 10.36.0.2, Framed-IP-Netmask = 255.255.255.0, start radiusd, and check auth: radtest test test1 127.0.0.1 1002 testing123 Sending Access-Request of id 199 to 127.0.0.1 port 1812 User-Name = "test" User-Password = "test1" NAS-IP-Address = 127.0.0.1 NAS-Port = 1002 Message-Authenticator = 0x00000000000000000000000000000000 rad_recv: Access-Accept packet from host 127.0.0.1 port 1812, id=199, length=44 Service-Type = Framed-User Framed-Protocol = PPP Framed-IP-Address = 10.36.0.2 Framed-IP-Netmask = 255.255.255.0 Works fine. Next step. Add to mpd.conf: radius: set auth disable internal set auth max-logins 1 CI set auth enable radius-auth set radius timeout 90 set radius retries 2 set radius server 127.0.0.1 testing123 1812 1813 set radius me 127.0.0.1 create link template L pppoe set link action bundle B set link max-children 1000 set link no multilink set link no shortseq set link no pap chap-md5 chap-msv1 chap-msv2 set link enable chap set pppoe acname Internet load radius create link template em1 L set pppoe iface em1 set link enable incoming And trying to connect, auth failed, here is mpd log: mpd: [em1-2] LCP: auth: peer wants nothing, I want CHAP mpd: [em1-2] CHAP: sending CHALLENGE #1 len: 21 mpd: [em1-2] LCP: LayerUp mpd: [em1-2] CHAP: rec'd RESPONSE #1 len: 58 mpd: [em1-2] Name: "test" mpd: [em1-2] AUTH: Trying RADIUS mpd: [em1-2] RADIUS: Authenticating user 'test' mpd: [em1-2] RADIUS: Rec'd RAD_ACCESS_REJECT for user 'test' mpd: [em1-2] AUTH: RADIUS returned: failed mpd: [em1-2] AUTH: ran out of backends mpd: [em1-2] CHAP: Auth return status: failed mpd: [em1-2] CHAP: Reply message: ^AE=691 R=1 mpd: [em1-2] CHAP: sending FAILURE #1 len: 14 mpd: [em1-2] LCP: authorization failed Then i start freeradius as radiusd -fX, and get this log: rad_recv: Access-Request packet from host 127.0.0.1 port 46400, id=223, length=282 NAS-Identifier = "rubin.svyaz-nt.ru" NAS-IP-Address = 127.0.0.1 Message-Authenticator = 0x14d36639bed8074ec2988118125367ea Acct-Session-Id = "815965-em1-2" NAS-Port = 2 NAS-Port-Type = Ethernet Service-Type = Framed-User Framed-Protocol = PPP Calling-Station-Id = "00e05290b3e3 / 00:e0:52:90:b3:e3 / em1" NAS-Port-Id = "em1" Vendor-12341-Attr-12 = 0x656d312d32 Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Client-Endpoint:0 = "00:e0:52:90:b3:e3" User-Name = "test" MS-CHAP-Challenge = 0xbb1e68d5bbc30f228725a133877de83e MS-CHAP2-Response = 0x010088746ae65b68e435e9d045ad6f9569b60000000000000000b56991b4f20704cb6c68e5982eec5e98a7f4b470c109c1b9 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop [mschap] Found MS-CHAP attributes. Setting 'Auth-Type = mschap' ++[mschap] returns ok [eap] No EAP-Message, not doing EAP ++[eap] returns noop [files] users: Matched entry DEFAULT at line 172 ++[files] returns ok Found Auth-Type = MSCHAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group MS-CHAP {...} [mschap] No Cleartext-Password configured. Cannot create LM-Password. [mschap] No Cleartext-Password configured. Cannot create NT-Password. [mschap] Creating challenge hash with username: test [mschap] Client is using MS-CHAPv2 for test, we need NT-Password [mschap] FAILED: No NT/LM-Password. Cannot perform authentication. [mschap] FAILED: MS-CHAP2-Response is incorrect ++[mschap] returns reject Failed to authenticate the user. Login incorrect: [test] (from client localhost port 2 cli 00e05290b3e3 / 00:e0:52:90:b3:e3 / em1) Using Post-Auth-Type REJECT # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> test attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 2 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 2 Sending Access-Reject of id 223 to 127.0.0.1 port 46400 MS-CHAP-Error = "\001E=691 R=1" Why i have error "[mschap] No Cleartext-Password configured. Cannot create LM-Password." ? I define cleartext-password in users. I check raddb/sites-enabled/default authorize { chap mschap eap { ok = return } files } looks ok for me. Whats wrong with mpd/chap/radius ?

  Read the article

• wireless internet in linux is very very slow... but in windows.... everythnings fine

  - by Cody Acer

  yesterday when i was connecting to our neighbors wifi connection which is the signal strength is below 50%, i cant browse anything... even ping to gateway. 100% packet loss, and sometimes.. i can connect awesomely i can open my facebook account for 15 minutes but after 15min.. connection is extremely slow. but not windows i can surf even the signal str is very poor weird ey??.. root@Emely:~# lspci -knn 00:00.0 Host bridge [0600]: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx DMI Bridge [8086:a010] Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072] Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller [8086:a011] Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072] Kernel driver in use: i915 Kernel modules: i915 00:02.1 Display controller [0380]: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller [8086:a012] Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072] 00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] (rev 02) Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072] Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 1 [8086:27d0] (rev 02) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 2 [8086:27d2] (rev 02) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.2 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 3 [8086:27d4] (rev 02) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 4 [8086:27d6] (rev 02) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072] Kernel driver in use: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072] Kernel driver in use: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072] Kernel driver in use: uhci_hcd 00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072] Kernel driver in use: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller [8086:27cc] (rev 02) Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072] Kernel driver in use: ehci-pci 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) 00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02) Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072] Kernel driver in use: lpc_ich Kernel modules: lpc_ich 00:1f.2 SATA controller [0106]: Intel Corporation NM10/ICH7 Family SATA Controller [AHCI mode] [8086:27c1] (rev 02) Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072] Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus [0c05]: Intel Corporation NM10/ICH7 Family SMBus Controller [8086:27da] (rev 02) Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072] Kernel modules: i2c-i801 05:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter [14e4:4727] (rev 01) Subsystem: Wistron NeWeb Corp. Device [185f:051a] Kernel driver in use: bcma-pci-bridge Kernel modules: bcma 09:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller [11ab:4354] Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072] Kernel driver in use: sky2 Kernel modules: sky2 root@Emely:~# ip addr show 1: lo: mtu 65536 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: mtu 1500 qdisc pfifo_fast state DOWN qlen 1000 link/ether e8:11:32:2e:a6:fd brd ff:ff:ff:ff:ff:ff 3: wlan0: mtu 1500 qdisc mq state UP qlen 1000 link/ether 00:1b:b1:a9:ac:e0 brd ff:ff:ff:ff:ff:ff inet 192.168.1.108/24 brd 192.168.1.255 scope global wlan0 inet6 fe80::21b:b1ff:fea9:ace0/64 scope link valid_lft forever preferred_lft forever root@Emely:~# ip link show 1: lo: mtu 65536 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: mtu 1500 qdisc pfifo_fast state DOWN qlen 1000 link/ether e8:11:32:2e:a6:fd brd ff:ff:ff:ff:ff:ff 3: wlan0: mtu 1500 qdisc mq state UP qlen 1000 link/ether 00:1b:b1:a9:ac:e0 brd ff:ff:ff:ff:ff:ff root@Emely:~# rfkill list all 0: samsung-wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: samsung-bluetooth: Bluetooth Soft blocked: no Hard blocked: no 2: hci0: Bluetooth Soft blocked: no Hard blocked: no 3: phy0: Wireless LAN Soft blocked: no Hard blocked: no is this a wireless driver issue?

  Read the article

• Auth-Type :- Reject in RADIUS users file matches inner tunnel request but sends Access-Accept

  - by mgorven

  I have WPA2 802.11x EAP authentication setup using FreeRADIUS 2.1.8 on Ubuntu 10.04.4 talking to OpenLDAP, and can successfully authenticate using PEAP/MSCHAPv2, TTLS/MSCHAPv2 and TTLS/PAP (both via the AP and using eapol_test). I am now trying to restrict access to specific SSIDs based on the LDAP groups which the user belongs to. I have configured group membership checking in /etc/freeradius/modules/ldap like so: groupname_attribute = cn groupmembership_filter = "(|(&(objectClass=posixGroup)(memberUid=%{User-Name}))(&(objectClass=posixGroup)(uniquemember=%{User-Name})))" and I have configured extraction of the SSID from Called-Station-Id into Called-Station-SSID based on the Mac Auth wiki page. In /etc/freeradius/eap.conf I have enabled copying attributes from the outer tunnel into the inner tunnel, and usage of the inner tunnel response in the outer tunnel (for both PEAP and TTLS). I had the same behaviour before changing these options however. copy_request_to_tunnel = yes use_tunneled_reply = yes I'm running eapol_test like this to test the setup: eapol_test -c peap-mschapv2.conf -a 172.16.0.16 -s testing123 -N 30:s:01-23-45-67-89-01:Example-EAP with the following peap-mschapv2.conf file: network={ ssid="Example-EAP" key_mgmt=WPA-EAP eap=PEAP identity="mgorven" anonymous_identity="anonymous" password="foobar" phase2="autheap=MSCHAPV2" } With the following in /etc/freeradius/users: DEFAULT Ldap-Group == "employees" and running freeradius-Xx, I can see that the LDAP group retrieval works, and that the SSID is extracted. Debug: [ldap] performing search in dc=example,dc=com, with filter (&(cn=employees)(|(&(objectClass=posixGroup)(memberUid=mgorven))(&(objectClass=posixGroup)(uniquemember=mgorven)))) Debug: rlm_ldap::ldap_groupcmp: User found in group employees ... Info: expand: %{7} -> Example-EAP Next I try to only allow access to users in the employees group (regardless of SSID), so I put the following in /etc/freeradius/users: DEFAULT Ldap-Group == "employees" DEFAULT Auth-Type := Reject But this immediately rejects the Access-Request in the outer tunnel because the anonymous user is not in the employees group. So I modify it to only match inner tunnel requests like so: DEFAULT Ldap-Group == "employees" DEFAULT FreeRADIUS-Proxied-To == "127.0.0.1" Auth-Type := Reject, Reply-Message = "User does not belong to any groups which may access this SSID." Now users which are in the employees group are authenticated, but so are users which are not in the employees group. I see the reject entry being matched, and the Reply-Message is set, but the client receives an Access-Accept. Debug: rlm_ldap::ldap_groupcmp: Group employees not found or user is not a member. Info: [files] users: Matched entry DEFAULT at line 209 Info: ++[files] returns ok ... Auth: Login OK: [mgorven] (from client test port 0 cli 02-00-00-00-00-01 via TLS tunnel) Info: WARNING: Empty section. Using default return values. ... Info: [peap] Got tunneled reply code 2 Auth-Type := Reject Reply-Message = "User does not belong to any groups which may access this SSID." ... Info: [peap] Got tunneled reply RADIUS code 2 Auth-Type := Reject Reply-Message = "User does not belong to any groups which may access this SSID." ... Info: [peap] Tunneled authentication was successful. Info: [peap] SUCCESS Info: [peap] Saving tunneled attributes for later ... Sending Access-Accept of id 11 to 172.16.2.44 port 60746 Reply-Message = "User does not belong to any groups which may access this SSID." User-Name = "mgorven" and eapol_test reports: RADIUS message: code=2 (Access-Accept) identifier=11 length=233 Attribute 18 (Reply-Message) length=64 Value: 'User does not belong to any groups which may access this SSID.' Attribute 1 (User-Name) length=9 Value: 'mgorven' ... SUCCESS Why isn't the request being rejected, and is this the right way to implement this?

  Read the article

• Static route works on one computer, not the other

  - by Dan

  I have been struggling with this for a couple days now, maybe I just need some people with a fresh perspective to figure out what the issue is. Basically I have a bunch of computers that are being routed through a specific gateway in order to access a web page that is hosted internally on a separate subnet. I set up static routes on all of the computers, and they all work... except one. Here's what a route print -4 looks like for a working computer (Windows 7): =========================================================================== Interface List 14...xx xx xx xx xx xx ......Broadcom 802.11n Network Adapter 11...xx xx xx xx xx xx ......Realtek PCIe GBE Family Controller 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Microsoft 6to4 Adapter 17...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.xxx.xxx.230 10.xxx.xxx.94 20 10.zzz.zzz.0 255.255.255.0 10.xxx.xxx.147 10.xxx.xxx.94 21 10.xxx.xxx.0 255.255.255.0 On-link 10.xxx.xxx.94 276 10.xxx.xxx.94 255.255.255.255 On-link 10.xxx.xxx.94 276 10.xxx.xxx.255 255.255.255.255 On-link 10.xxx.xxx.94 276 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.xxx.xxx.94 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.xxx.xxx.94 276 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 10.zzz.zzz.0 255.255.255.0 10.xxx.xxx.147 1 =========================================================================== And here's a route print -4 from the station that doesn't work (also Windows 7): =========================================================================== Interface List 10...xx xx xx xx xx xx ......Realtek PCIe GBE Family Controller 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft 6to4 Adapter 14...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 16...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.xxx.xxx.230 10.xxx.xxx.132 276 10.zzz.zzz.0 255.255.255.0 10.xxx.xxx.147 10.xxx.xxx.132 21 10.xxx.xxx.0 255.255.255.0 On-link 10.xxx.xxx.132 276 10.xxx.xxx.132 255.255.255.255 On-link 10.xxx.xxx.132 276 10.xxx.xxx.255 255.255.255.255 On-link 10.xxx.xxx.132 276 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.xxx.xxx.132 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.xxx.xxx.132 276 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 10.zzz.zzz.0 255.255.255.0 10.xxx.xxx.147 1 =========================================================================== Both of these stations are running Windows 7. So essentially what I am trying to do here is route all traffic to the 10.zzz.zzz.0 subnet through the 10.xxx.xxx.147 gateway. Everything else should go through the 10.xxx.xxx.230 gateway. This is the intended behavior, and again it is working everywhere but that one station. I noticed that the Active Route metric costs differ between the two stations, but I am new to the routing table and I am not sure how that is impacting the behavior. I hope I have been able to explain the situation clearly. Any help would be much appreciated. I can provide any additional information if needed!

  Read the article

< Previous Page | 18 19 20 21 22 23 24  | Next Page >