Search Results

Search found 733 results on 30 pages for 'geforce'.

Page 22/30 | < Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >

• Is my new Graphic Card cause for my PC hanging?

  - by Anirudha

  My Computer Specification My Motherboard specification My new Graphic Card Some days ago I bought a GeForce 8400 GS Graphic card. My computer satisfied all the minimum system requirements it required. After installing the Card in PCI Express Slot I started the computer. But it now hangs at the POST screen i.e.(the first screen when the PC loads). It hangs at Checking NVRAM. I had checked the graphic card on other PC and its works perfectly. So I think there's no problem in the Graphic card. If I remove my graphic card and run my PC with built in Graphic card, my PC works and doesn't hang. So, what can be the problem? Thanks for reading....

  Read the article

• Mac OS X Lion (10.7.3) Virtual Machine?

  - by Ben Hooper

  I have been looking into this for a while and have attempted quite a few "solutions" (hackintosh boot images, universal unlockers, etc) before I gave in and asked for help. I know this is extremely difficult to accomplish, especially with an AMD CPU, but it has been done and it can't hurt to ask. Question Does anyone know of any way to actually get Mac OS X Lion (10.7.3) to boot in VMware Workstation 8.0.2? I know that Mac OS X is heavily dependant on hardware configuration, so I will post my PC's hardware below, if it helps. As far as I know it's only reliant on the CPU, but I will post it all just in case. PC Hardware Motherboard: ASUS M4A77T CPU: AMD Phenom II x4 955 Black Edition Graphics Card: Palit Sonic Platinum nVIDIA Geforce GTX 460 Memory: G-Skill [RipjawsX F3-12800CL9D-8GBXL] 8GB PSU: Arctic Power 700(W) Hard Drive: SAMSUNG HD204UI 2TB Thanks in advance. :)

  Read the article

• Client PC not booting when certain TFT plugged in - TFT or graphics card failure?

  - by Chake

  here comes something quite strange: On a client machine (DELL Vostro 420) we experienced problems when booting: when turning on the machine beeps normal but doesn't display anything and doesn't boot. After some testing I found out, that this only happens if one (of the two) monitors (Iiyama ProLite E2472HDD) is plugged in while booting. If the other monitor (TFT 2) is plugged in everything is fine. Here a small illustration, TFT 1 is the bad guy: TFT 1 | TFT 2 | failure x | x | x x | | x | x | After BIOS-Phase I can safely plug in TFT 1 and everything works just fine. The question is, what can be done to avoide this behavior: Change monitor? (Iiyama ProLite E2472HDD) Change graphics card? (GeForce 9800 GT) Other suggestions?

  Read the article

• Does PCI bus really occupy 1.8GB

  - by Neil

  I am using a Dell Vostro 1700 laptop which currently has 2GB of RAM. I was considering buying some more memory to upgrade it to 4GB. I am running 32 bit Windows Vista and I know that there can be issues that prevent it from making use of a full 4GB which I believe relate to the fact that memory mapped devices, e.g. graphics card, also need to be allocated addresses in the 4GB range addressable with 32 bits. Consequently I was looking at device manager - resources by connection - memory to see what devices where allocated what memory addresses. I was surprised to see that there was an entry for [80000000 - F3FFFFFF] PCI bus. That is a 1.8GB range of addresses. When I expanded it the only thing in it was [E0000000 - EFFFFFFF] NVIDIA GeForce 8600M GT which is only 256MB. So my question is does the PCI bus really occupy 1.8GB of address space and will it prevent my computer from making use of any more memory than it already has.

  Read the article

• Laptop forgets second monitor when it goes to sleep

  - by al c

  I recently updated my nvidia driver... now I have to re-establish the connection to my second monitor everytime the laptop goes to sleep. When I open the NVIDIA control panel, the second monitor is listed there but the checkbox beside it has been cleared. Oddly my laptop screen is identified as display #3 and the external screen as display #4. Is there a registry key that I can clear to get them set back to #1 & #2? Will that fix the problem? Or is there a simpler solution. (It's a Dell Studio XPS laptop with GeForce 9500M running Windows Vista 64-bit) TIA Al

  Read the article

• xubutnu Nvidia Settings not remembered

  - by hozza

  I have an Nvidia card and I'm using NVIDIA Driver Version: 304.51 and the NVIDIA X Server Settings GUI. Everything works fine but when I reboot and login again both my two screens are set to +0 +0 so they mirror each other... I change the settings to screen 2 (NEC LED) to be left of screen 1 (DELL) click Apply and Save to X Configuration File... It all works but when I login again the settings are not remembered... This is my xorg config file, can anyone help out? # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 304.51 (buildd@komainu) Fri Oct 12 12:53:49 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL 2005FPW" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 640" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "nvidiaXineramaInfoOrder" "DFP-0" Option "metamodes" "DFP-0: nvidia-auto-select +1280+0, DFP-2: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Full computer freeze with audio stuttering after playing games for a period of time

  - by Wes

  I've been having a problem with my computer freezing completely when playing games like LA Noire or SW:TOR (yay early access!). Basically, what happens is I will play for around an hour or so (depending on the game) and when the freeze happens, the entire computer locks up and any audio that was being played glitches out and stutters broken-record style (only much shorter. Very techno). I think it might be heat related and thought it might be my video card overheating, so I have been setting my video card (Nvidia Geforce 260GTX 216-core) fan to highest setting, but that has little to no effect. Now I'm beginning to think it's either my FSB or CPU overheating. Can anyone provide some insight or similar experiences? I'm really at a loss and don't wanna damage my rig beyond repair.

  Read the article

• Error 5A - Internal CPU Error

  - by Mitch

  So I built myself a pc for the first time. The machine has been running properly, and without issue, since March of this year. Today after an hour or so of gaming the machine shutdown without warning. Any attempts to reboot have been unsuccessful. I have managed to get it to post, twice, but it doesn't get as far as the OS before it shuts off again. I pulled the second video card so I could see the error code LED and it appears to be showing 5A which matches to "Internal CPU Error". Am I looking at a failed CPU or is this a symptom of another issue? Any feedback you can provide is most appreciated. Here's my parts list: CPU: Intel Core i7-4930K 3.4GHz 6-Core CPU Cooler: Corsair H105 73.0 CFM Liquid Motherboard: Asus X79 Deluxe ATX LGA2011 Ram: G.Skill Ripjaws X Series 32GB (4 x 8GB) DDR3-1600 Video card (x2): EVGA GeForce GTX 770 2GB Power supply: Corsair 1000W ATX12V / EPS12V

  Read the article

• Slight stuttering when moving windows in fresh 12.04 install

  - by Konsolkongen

  Installed Ubuntu 12.04 today and my problem is that when I'm moving the windows around my screen it doesn't feel smooth at all. Usually I can fix this by changing the refresh rate to 60Hz, but this time it doesn't help. My graphics card is a Nvidia GTX 560Ti and I've tried both the 295.40, 295.45 and 304.43 (which I'm currently using) but neither has resolved my problem. I searched around a bit and tried changing the refresh-rate using compizconfig-settings-manager and xrandr. No change using CCSM, but when I tried xrandr I got this reply: konsolkongen@konsolkongen-desktop:~$ xrandr -r 60Rate 60.0 Hz not available for this size - which is nonsense of course. This is what my xorg.conf file looks like: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@allspice) Fri Mar 30 15:25:24 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Samsung SyncMaster" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 560 Ti" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "metamodes" "DFP-0: 1680x1050_60 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Any help would be greatly appreciated, my obsession with video quality can't stand stuttering like this. For what it's worth though, I don't have any screen tearing, so at least V-sync is on. Thanks.

  Read the article

• after upgrade from 10.04 to 12.04 cannot boot with linux 3.2.0-24-generic-pae

  - by Ricardo

  After upgrade from 10.04 to 12.04, I cannot boot with linux 3.2.0-24-generic-pae: process gets frozen in a xubuntu initialization screen (I had qimo installed). If I try the recovery mode (with the same Linux version), booting freezes after this message: Begin: Mounting root file system. If in grub menu I choose Previous Linux versions, I can boot using Linux 2.6.32-41-generic-pae. But once logged in, some things don't seem to work (apt-get update fails, update manager fails, HID menu does not provide suggestions...) (to be honest, I have no idea whether this is part of the bigger issue) Reading in Ask Ubuntu through apparently similar problems, I decided to follow some advices: got boot-repair and run it. The problem remains & I got this report. I also run as root in terminal $ sudo update-initramfs -u and this is what I got: update-initramfs: Generating /boot/initrd.img-3.2.0-24-generic-pae cryptsetup: WARNING: failed to detect canonical device of /dev/sda1 cryptsetup: WARNING: could not determine root device from /etc/fstab /tmp/mkinitramfs_EIDlHy/scripts/classmate-bottom/45xconfig: 9: .: Can't open /scripts/casper-functions What else? My pc is Intel® Core™ i7 CPU 870 @ 2.93GHz × 8, graphs is GeForce 8400 GS/PCIe/SSE2, memory is 7,8 GiB. I have two questions: Is this a bug in the newest kernel I should report? Is there anything I can do appart from a fresh install?

  Read the article

• Problem with Win7 connecting to Internet

  - by Lucas

  Hello, I have had Windows 7 for about a year now and for the first four months it worked perfectly. But for the last 8 months it has been horrible. It will connect to the Internet for about 5 minutes and then just lose connection. It will reconnect in about 5 minues but then it just keeps disconnecting. I ran a virus scan about 2 weeks ago and I found a Trojan on my PC which I removed and dealt with. It was fine after that but now for these last couple days it has been just as bad as before. I think a virus is causing this but I will read any suggestions and tips to help me solve this problem. Thank you. PC DETAILS: OS: WIndows 7 Home Premium 64-Bit- System Model: Aspire M5802- Processor: Intel Core 2 Quad CPU- Memory: 8192MB RAM- Graphics Card: NVIDIA GeForce GT 220

  Read the article

• lshw not showing network

  - by triunenature

  Output: {User}@{Computer}:~$ sudo lshw -class network {User}@{Computer}:~$ Another Test: {User}@{Computer}:~$ lspci 00:00.0 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a1) 00:01.0 ISA bridge: NVIDIA Corporation MCP61 LPC Bridge (rev a2) 00:01.1 SMBus: NVIDIA Corporation MCP61 SMBus (rev a2) 00:01.2 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a2) 00:02.0 USB controller: NVIDIA Corporation MCP61 USB 1.1 Controller (rev a3) 00:02.1 USB controller: NVIDIA Corporation MCP61 USB 2.0 Controller (rev a3) 00:04.0 PCI bridge: NVIDIA Corporation MCP61 PCI bridge (rev a1) 00:05.0 Audio device: NVIDIA Corporation MCP61 High Definition Audio (rev a2) 00:06.0 IDE interface: NVIDIA Corporation MCP61 IDE (rev a2) 00:07.0 Bridge: NVIDIA Corporation MCP61 Ethernet (rev a2) <<---- Network Card???? 00:08.0 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2) 00:08.1 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2) 00:09.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2) 00:0b.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 FireWire (IEEE 1394): LSI Corporation FW322/323 (rev 70) 02:00.0 VGA compatible controller: NVIDIA Corporation G96 [GeForce 9500 GT] (rev a1) If you look at 00:07.0 I believe that is the network card. However lshw doesnt show it. I mainly need information on network speed 10MBpS/100MBsP/1000MBpS Though knowing why my system isn't working would be nice.

  Read the article

• Ultrabook graphics card for gaming

  - by Francisc

  I want to get a Windows 8 "ultrabook" that I can also use for gaming. Most seem to have Intel HD Graphics 4000 (integrated) or NVIDIA GeForce GT 620M (dedicated). From experience, are they any good? Things I enjoy playing are Call of Duty, Fifa and Skyrim for example. I'm looking for a device that will work on the next generation of those games as well, so it shouldn't just barely work on the current versions that exist now. So, would those two cards suffice? Any advice is much appreciated. Thank you.

  Read the article

• Why can't I open programs after watching youtube videos for a while?

  - by manjivsanotsu

  I have recently built a new PC, and it worked fine for a while (1-2 months of no problems whatsoever). However in the recent weeks I noticed that after I watched some youtube videos and closed everything, I can no longer do anything except move the mouse and expand the Startup Menu. If I click on any of the programs on the Start Menu or type a program on the Run text box, it won't open anything. I can't open taskmgr, or windows explorer, or even shut down the PC. I don't have anything else running when I'm watching videos except ZoneAlarm and Avast. The only workaround I can do when this happens is a forced shutdown (holding the power button of my PC), and restart if I wanted to do anything more. But this happens a lot - about 4-5 times a week so I'm worried it would fry up my hardware if I keep on doing this. OS: Windows 7 Other Installed Software: Open Office, Tropico 4 game, Adobe Photoshop Browser used: Google Chrome Hardware: CPU: i7 2600K RAM: 16 GB Motherboard: Asus P8Z68-V GEN3 Hard Drive: 120GB Corsair Force GT SSD Graphics: 2047MB GeForce GTX 560 Ti

  Read the article

• Ubuntu 11.10 very slow compared to Windows

  - by Patrick

  I'm new to Ubuntu/linux. Since my PC is very old and not very fast with Windows 7, I decided to give Ubuntu a try, so I downloaded and installed Ubuntu 11.10 today. When I first started it, I had bad 800x600 resolution and it was very slow and annoying. So I installed a driver for my graphic card and now everything looks very nice (1280x1024).But I think it's still far slower than Windows 7. I tried to run in Ubuntu like a few people suggested on the forum but if I log in I get a black screen saying something like "this video mode cannot be displayed". I get that same screen when booting Ubuntu btw, but after about 15 seconds it disappears and just starts Ubuntu. I also installed other drivers for my graphic card but everything stayed the same. I noticed that i.e. when I open Firefox or system settings it takes about 5 seconds till it opens (while Windows 7 takes under 1 second to start i.e. Chrome) and when I do this my CPU usage gets to 100% for a short time. Computer specs: Memory: 2GB RAM Processor: Intel Pentium 4 2.8GHz Graphics Card: Nvidia GeForce 6800 400MHz. I read on various forums that 11.04 works flawless on many PCs, where 11.10 is very slow. Should I install 11.04 or could anybody help me with this problem?

  Read the article

• How can I get nVidia CUDA or OpenCL working on a laptop with nVidia discrete card/Intel Integrated Graphics?

  - by PeterDC

  Background: I'm a 3D artist (as a hobby) and have recently started using Ubuntu 12.04 LTS as a dual-boot with Windows 7. It's running on my a fairly new 64-bit Toshiba laptop with an nVidia GeForce GT 540M GPU (graphics card). It also, however has Intel Integrated Graphics (which I suspect Ubuntu's been using). So, when I render my 3D scenes to images on Windows, I am able to choose between using my CPU or my nVidia GPU (faster). From the 3D application, I can set the GPU to use either CUDA or OpenCL. In Ubuntu, there's no GPU option. After doing (too much?) research on the issues with Linux and the nVidia Optimus technology, I am slightly more enlightened, but a lot more confused. I don't care one bit about the Optimus technology, as battery life is not by any means an issue for me. Here's my question: What can I do to be able to use CUDA-utilizing programs (such as Blender) on my nVidia GPU in Ubuntu? Will I need nVidia drivers? (I have heard they don't play nicely with Optimus setups on Linux.) Is there at least a way to use OpenCL on my GPU in Ubuntu?

  Read the article

• Ubuntu installer shows three small screens

  - by Sylan

  I'm trying to install Ubuntu (or Kubuntu, which I tried first) 13.04 on a new laptop. I need the install in UEFI mode in order to properly dual boot with Windows 8. I've managed to overcome most of the UEFI issues up to the installer, which appeared as a black screen until I used nomodeset. Now the installer will appear, however it does fit my screen size. Instead, it appears as three small identical screens across the top of the monitor. I thought the problem could be solved by changing the display resolution in GRUB via changing the vga number, but this simply expanded the width of the three screens. While I could install it at this point, the identical screens are too small for me to be able to read the installer. As well, the "Try Ubuntu" option simply gets stuck at a black screen. I'm afraid these problems may persist through the installation if I attempted to continue. Additional information: The laptop is a Lenovo Ideapad Y580 with an i7 3630qm processor, and a GeForce GTX 660m graphics card which works alongside an Intel HD 4000 integrated card via Optimus.

  Read the article

• Fedora 16 Running Hot

  - by sdasdadas

  Since switching from Windows 7 to Fedora 16, my laptop has been running incredibly hot (by the air exhaust). The laptop is an Asus K73S. Running 'sensors', I receive: acpitz-virtual-0: 75.0 celsius nouveau-pci-0100: 66.0 celsius asus-isa-0000: 75.0 celsius The only CPU hog is Firefox at 30 - 40% on average. My GPU information (from lspci) is: Intel Corporation Xeon E3-1200/2nd Generation Core Process or Family Integrated Graphics Controller (rev 09). Running lspci | grep -i VGA, returns: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: nVidia Corporation GF106 [GeForce GT 555M SDDR3] (rev a1) I don't notice a huge difference running without the battery, but it does seem a little cooler. Thanks!

  Read the article

• Missing kernel on debian-testing-amd64-DVD-1

  - by Kyrol

  I want to install the Debian testing linux version. But at a certain point of the installation, an error occurs: Impossible to install kernel. a compatible kernel version is missing... … or something like that. I see that the image ISO of the DVD is less than 4GB, but is impossible that there is no compatible kernel version for the system. I have an Asus X53Sc with Intel core I7-2630QM, Geforce GT 520MX.

  Read the article

• Dual Monitor in Ubuntu 11.10 is resetting the theme

  - by Mengu

  i'm experiencing a strange problem with dual monitors. when i set the dual monitor via "nvidia settings" and save the setting to xorg.conf, the default unity theme and icons are turning back to gtk default. i also get an error telling me "could not apply the stored configuration for monitors" here is my xorg.conf: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 280.13 (buildd@yellow) Fri Aug 5 12:31:28 UTC 2011 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Chi Mei Optoelectronics corp." HorizSync 30.0 - 75.0 VertRefresh 60.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 540M" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "metamodes" "DFP: nvidia-auto-select +0+0, CRT: 1680x1050 +1920+0" SubSection "Display" Depth 24 EndSubSection EndSection here is an example of what i'm talking about: http://i.stack.imgur.com/vrlW1.png how can i fix this? thanks in advance.

  Read the article

• Connecting Dell XPS 17/HP Pavilion dv7 (nvidia GT 650M) to Apple LED Cinema Display for 2560x1440 resolution from notebook

  - by alphaTrader

  Is there any way to run higher than 1080p resolution from a Dell XPS 15/17 or HP Pavilion laptop? Specifically, I am planning to buy Dell XPS L721X or HP Pavilion dv7-7005tx with nvidia GeForce GT 650M and connect it to the Apple LED Cinema display via mini Displayport (I don't think Thunderbolt is supported on these notebooks). The idea is to get 1080p on the notebook and 2560x1440 on the main display. Only one of the montitors is active at any time. I asked Dell and they weren't of much help.

  Read the article

• Is GPU active when there are not any monitors?

  - by Mixer

  Does GPU render anything when there is no monitor plugged in? Today I turned my old PC into some kind of a "server" which means that I want it running 24/7. I don't need any display (I will operate through ssh) so when everything was set up I removed my monitor. After a hour I checked my graphic card's cooling system and it was still hot. My graphic card is GeForce 8600 (with DVI connector), OS is Debian Linux. What is the best solution in this situation (standalone server) if GPU is active and I don't want it to waste power?

  Read the article

• Just installed Ubuntu 12.04. When booting, all I get is a black screen with cursor

  - by user66378

  Installation appears to go fine. After rebooting, I get my motherboard loading screens, but when it comes time for Ubuntu to boot, I just get a black screen with a blinking white underscore in the top-left - same as I got when waiting for the install CD to load, except it lasts forever. The only keypress it seems to recognize is ctrl+alt+del, which reboots. Letters don't register, function keys w/ or w/o modifiers do nothing. I've installed Ubuntu 12.04 twice and got the same error. The first time, I installed it as the only OS, and had it take up the whole disk. The second time, I installed Windows 7 first, then Ubuntu by specifying custom partitions. After this install, it would boot straight to Windows without showing grub. I used EasyBCD to add the Ubuntu installation to grub, and this got grub to show, and let me select it, but it led back to the same error described up top. I've had Linux Mint 11 and 12 installed on this PC, but was unable to get previous versions of Ubuntu to install (always had errors while installing, not after). Hardware: Intel Core i7-2600K Sandy Bridge 3.4GHz (3.8GHz Turbo Boost) LGA 1155 ASUS SABERTOOTH P67 (REV 3.0) LGA 1155 Intel P67 SATA 6Gb/s USB 3.0 ATX Intel Motherboard EVGA 01G-P3-1371-TR GeForce GTX 460 (Fermi) CORSAIR Vengeance 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Western Digital RE4 WD5003ABYX 500GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive

  Read the article

• List of Asus U46 laptop troubles with Ubuntu 12.04

  - by Cybertib

  I've bought my ASUS U46 last february. I would like to make it work better with Ubuntu 12.04. Note taht I was forced to install Ubuntu 12.04 (before its publication) by ethernet. After a successfull install, several problem remain unfixed such as : USB 3 just does not work correctly. Can be fixed, but I didn't succeed yet. Nvidia Optimus (means that you can use Intel Chipset or the Nvidia GeForce) is possible to use thanks to BumbleBee project. It seems to work, though. But Nvidia tools still say they don't see any Nvidia driver installed. Battery duration can be optimised by using Laptop-tools. Any standby state lead to a X server crash. A good CTRL+ALT+F1 login and "shutdown -r" avoids a brutal power off. And since few weeks, I have some bug reports right after boot about "unattended-upgrade", and dpkg troubles after any apt-get install or update (Linux kernel doesn't compile anymore), ... Are there any ways to fix those troubles ? I would need a bit of assistance, in fact. Thank you for you help, Sincerly yours, Thibault

  Read the article

• Low end dedicated GPU vs. integrated Intel graphics (for light CAD work)

  - by PaulJ

  I have been asked to spec a PC for an interior design business. They are going to do some AutoCAD work (but they won't be using massive datasets or anything), and also use Kitchen Draw, a program that has 3D visualization features and says, in its requirements, that "a recent NVidia or ATI card might be enough". Since they are very limited budget-wise, I had originally picked a GeForce GT 610 card, but this card is so low end that I'm left wondering whether it will be an improvement at all over the dedicated Intel HD2500 graphics chip that comes with the CPU (I will be using an Ivy-Bridge Intel i5). Most of the information I see around is for gaming, which isn't really relevant in my case. Basically, for the use case I've described (light 3D work), can one get away with a current Intel HD graphics chipset? And will a low end GPU like the GT 610 provide a noticeable improvement?

  Read the article

< Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >