Search Results

Search found 20941 results on 838 pages for 'hard drive recovery'.

Page 22/838 | < Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >

• Dropped Dell XPS has hard-drive trouble

  - by Alex B.

  Yesterday, my mom dropped her laptop to the floor and got the blue screen of death after trying to boot the system. I was able to start a Fedora live CD and get some of her stuff off the hard drive, but I cannot seem to be able to install Windows on it. The installation starts loading files and then the computer turns off. I am thinking that she might need a new hard drive. Any ideas? Edit: I actually was able to boot the Windows XP installation but it is saying that no hard disk is detected. How can this be possible if I was able to mount the drive on fedora yesterday?

  Read the article

• Hard Drive Fundamentals And Verifying Disk Performance

  - by Agnel Kurian

  Over the past few months, my Windows XP machine has slowed down to a crawl. It takes about 10-15 minutes to go from power-up to reaching a responsive state. I have reasons to believe that this is a result of the hard disk slowing down. Questions: Do hard disks slow down as a result of mechanical wear and tear ...or age? How do I check if my disk has slowed down? Conversely, how can I verify that my disk is indeed running at the speed it's designed to run at? Could drivers be at fault here? Do hard disks come with drivers or does Windows use a generic driver?

  Read the article

• How to determine the best byte size for the dd command

  - by James

  I know that doing a dd if=/dev/hda of=/dev/hdb does a deep hard drive copy. I've heard that people have been able to speed up the process by increasing the number of bytes that are read and written at a time (512) with the "bs" option. People have suggested that the optimal byte size is due to sector size. I personally think it would have something to do with the amount of cache that the hard drive has. My question is: What determines the ideal byte size for copying from a hard drive? and Why does that determine the ideal byte size?

  Read the article

• help building a PC that can image a dozen hard drives simultaneously

  - by Bigbio2002

  Not sure if this belongs on here or SuperUser, but here goes... I'm trying to figure out how to make a mass hard drive imaging PC out of COTS parts. A dedicated imaging device can do 10 drives at a time, but costs several thousand dollars. So far, I'm thinking to use several 3-port PCI-E Firewire cards, and use some kind of Firewire-to-IDE adapter to connect the drives themselves. The "software" would consist of scripting diskpart, or some other imaging utility. The problem is that I can't seem to find any sort of adapter. I could use standard external hard drive bays, but then I'd have a dozen power cables that I need to plug in. Ugly, messy, and inefficient. I picked Firewire over USB not only for better transfer speeds, but also because FW can deliver power over the bus (and could theoretically power a hard drive). Does anyone have any input on this?

  Read the article

• How Do You Stress-Test Your Hard Drives?

  - by MetaHyperBolic

  When looking for large new drives (= 1 TB) on newegg and the like, I note a number of reviews talking about drives being either D.O.A. or hitting the Click of Death (or even releasing the Magic Smoke) within a week or so of use. A portion of the reviews mention this phenomenon whether the drive in question is Western Digital or Hitachi or whatever. For those of you using Windows, what do you to: 1) Place a large initial stress on the drive to see if it can take it? For how long? 2) Test the drive afterwards (presumably with some sort of S.M.A.R.T. tool or others) to see if any negative changes have been noted? Note: This is one component of a larger plan for both high-availability and backups for my home data.

  Read the article

• Minimize VirtualBox Hard Drive disk

  - by Aviv

  I have Ubuntu Server 10.04 TLS installed on a Virtual Machine in a VirtualBox. The size of the Hard Drive is dynamic growing hard drive and the maximum is 32GB. At the beginning i had 4GB on the Hard Drive and the size of the .vdi was 4GB. Lately the size of data on the disk is 15GB but the size of the .vdi is almost 32GB. Why is that? How can i pack / optimize / defrag the HD so it will be the same size of the data on the disk? Thanks.

  Read the article

• hardware: delay and distinct 'click' before hard drive access

  - by matt lohkamp

  I have a windows 7 box stashed away in my closet, containing (among other things) 2 big HDDs linked together as a mirrored volume - basically a super lazy NAS / media server. I've noticed that when that drive is accessed (whether locally, on the machine itself, or remotely, from another computer, or my xbox, for example) there's a noticeable pause, and then from the computer itself, a 'click!' noise, after which the drive is accessed; e.g. open \\computername\shared\, wait 2 seconds, hear 'click!' and then see files appear in windows explorer. Any ideas? Otherwise the drive preforms normally - is it a windows thing? a HDD-about-to-die thing? Or a "yeah that always happens, you've just never noticed it before" thing?

  Read the article

• Cloning Windows 2003 Server to new hard drive results in failure

  - by Level1Coder

  Scenario: Old hdd is a Seagate 320gb SATA drive New hdd is a WD 320gb SATA drive Created an exact clone and replaced old hdd with new hdd. Boot up with new hdd, it gets into Windows 2003 server environment but things look weird. Lots of system event failures in the event viewer log. System is barely unusable, critical services are all down. Boot up with old hdd, everything is fine. QUESTION: Is it possible to do a simple clone of a Windows 2003 server system? All I'm changing is the hard drive, everything else stays the same (old CPU/old mobo/etc..)

  Read the article

• Does installing windows format the hard disk?

  - by Jason

  My Google search for ""does installing windows format the hard disk" returns: No results found for "does installing windows format the hard disk". I was quite surprised. I'm hoping to get a quick answer here. Does an install format the hard disk, and destroy all data, including non-os/s data? -Or do you specifically have to say "format" at some point so you know you are losing everything? [I tried to go to SP3, but it doesn't work on my computer. My SP2 disk is fired. I only have a SP1 disk, with a seperate SP2 package. I can't get to Safe Mode to uninstall SP3 ("Windows XP Setup cann run under Safemode. Setup will restart now.). I don't want running the SP1 disk to destroy any non-o/s data.] Thanks.

  Read the article

• Issues with hard disk secure erase

  - by John Watson

  I want to completely wipe all the data and both OSes (Ubuntu and Windows 7) from my hard drive. I tried DBAN but it gives me an error and does not run. I am looking for an alternative. After reading some articles online, I came to know that, using a Linux live CD, it can be done using either of following commands. a) sudo dd if=/dev/zero of=/dev/sda b) sudo shred -vfz -n 1 /dev/sda My questions are 1) Which option (a or b) is more secure (wipes everything) and faster? 2) Does either of the options damage the hard drive or anything? I want to use hard drive again i.e. installing Windows and Ubuntu again.

  Read the article

• Delete files on external hard drive affect SSD?

  - by haar

  I've got a SSD as my primary hard drive. I have an external HDD hard drive which I use to store downloaded files. At the moment I have to delete 80 GB of that external hard drive. I realized that if I delete it normally, it would probably go to the recycle bin of my SSD. I am wondering how I can delete the files on my HDD without affecting the SSD or putting any files on it. Do you know how to do this? Best, haar

  Read the article

• Disk Drive not working

  - by user287681

  The CD/DVD drive on my sisters' (I'm helping her shift from Win. XP (now officially deprecated by Microsoft) to Ubuntu) system. Now, it may end up being a failed attempt, all together (Almost the whole last year (when she's been on XP) the disk drive hasn't (not even powering on) been working.), I just want to make sure I've explored every remote possibility. Because I figure, "Huh, now that I've got Ubuntu running, instead of XP, that (just) might make a difference.". I have tried using the sudo lshw command in the terminal, to (seemingly) no avil, but, who knows, you might be able to make something out of it. Here's the output: kyra@kyra-Satellite-P105:~$ sudo lshw [sudo] password for kyra: kyra-satellite-p105 description: Notebook product: Satellite P105 () vendor: TOSHIBA version: PSPA0U-0TN01M serial: 96084354W width: 64 bits capabilities: smbios-2.4 dmi-2.4 vsyscall32 configuration: administrator_password=disabled boot=oem-specific chassis=notebook frontpanel_password=unknown keyboard_password=unknown power-on_password=disabled uuid=00900559-F88E-D811-82E0-00163680E992 *-core description: Motherboard product: Satellite P105 vendor: TOSHIBA physical id: 0 version: Not Applicable serial: 1234567890 *-firmware description: BIOS vendor: TOSHIBA physical id: 0 version: V4.70 date: 01/19/20092 size: 92KiB capabilities: isa pci pcmcia pnp upgrade shadowing escd cdboot acpi usb biosbootspecification *-cpu description: CPU product: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: Intel(R) Core(TM)2 CPU T5 slot: U2E1 size: 1667MHz capacity: 1667MHz width: 64 bits clock: 166MHz capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx x86-64 constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm lahf_lm dtherm cpufreq *-cache:0 description: L1 cache physical id: 5 slot: L1 Cache size: 16KiB capacity: 16KiB capabilities: asynchronous internal write-back *-cache:1 description: L2 cache physical id: 6 slot: L2 Cache size: 2MiB capabilities: burst external write-back *-memory description: System Memory physical id: c slot: System board or motherboard size: 2GiB capacity: 3GiB *-bank:0 description: SODIMM DDR2 Synchronous physical id: 0 slot: M1 size: 1GiB width: 64 bits *-bank:1 description: SODIMM DDR2 Synchronous physical id: 1 slot: M2 size: 1GiB width: 64 bits *-pci description: Host bridge product: Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 03 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel resources: irq:0 *-display:0 description: VGA compatible controller product: Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 03 width: 32 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:16 memory:d0200000-d027ffff ioport:1800(size=8) memory:c0000000-cfffffff memory:d0300000-d033ffff *-display:1 UNCLAIMED description: Display controller product: Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 03 width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: latency=0 resources: memory:d0280000-d02fffff *-multimedia description: Audio device product: NM10/ICH7 Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 02 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:44 memory:d0340000-d0343fff *-pci:0 description: PCI bridge product: NM10/ICH7 Family PCI Express Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:3000(size=4096) memory:84000000-841fffff ioport:84200000(size=2097152) *-pci:1 description: PCI bridge product: NM10/ICH7 Family PCI Express Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:41 ioport:4000(size=4096) memory:84400000-846fffff ioport:84700000(size=2097152) *-network description: Wireless interface product: PRO/Wireless 3945ABG [Golan] Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 02 serial: 00:13:02:d6:d2:35 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwl3945 driverversion=3.13.0-29-generic firmware=15.32.2.9 ip=10.110.20.157 latency=0 link=yes multicast=yes wireless=IEEE 802.11abg resources: irq:43 memory:84400000-84400fff *-pci:2 description: PCI bridge product: NM10/ICH7 Family PCI Express Port 3 vendor: Intel Corporation physical id: 1c.2 bus info: pci@0000:00:1c.2 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:42 ioport:5000(size=4096) memory:84900000-84afffff ioport:84b00000(size=2097152) *-usb:0 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:23 ioport:1820(size=32) *-usb:1 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #2 vendor: Intel Corporation physical id: 1d.1 bus info: pci@0000:00:1d.1 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:19 ioport:1840(size=32) *-usb:2 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #3 vendor: Intel Corporation physical id: 1d.2 bus info: pci@0000:00:1d.2 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:18 ioport:1860(size=32) *-usb:3 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #4 vendor: Intel Corporation physical id: 1d.3 bus info: pci@0000:00:1d.3 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:16 ioport:1880(size=32) *-usb:4 description: USB controller product: NM10/ICH7 Family USB2 EHCI Controller vendor: Intel Corporation physical id: 1d.7 bus info: pci@0000:00:1d.7 version: 02 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci-pci latency=0 resources: irq:23 memory:d0544000-d05443ff *-pci:3 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: e2 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list resources: ioport:2000(size=4096) memory:d0000000-d00fffff ioport:80000000(size=67108864) *-pcmcia description: CardBus bridge product: PCIxx12 Cardbus Controller vendor: Texas Instruments physical id: 4 bus info: pci@0000:0a:04.0 version: 00 width: 32 bits clock: 33MHz capabilities: pcmcia bus_master cap_list configuration: driver=yenta_cardbus latency=176 maxlatency=5 mingnt=192 resources: irq:17 memory:d0004000-d0004fff ioport:2400(size=256) ioport:2800(size=256) memory:80000000-83ffffff memory:88000000-8bffffff *-firewire description: FireWire (IEEE 1394) product: PCIxx12 OHCI Compliant IEEE 1394 Host Controller vendor: Texas Instruments physical id: 4.1 bus info: pci@0000:0a:04.1 version: 00 width: 32 bits clock: 33MHz capabilities: pm ohci bus_master cap_list configuration: driver=firewire_ohci latency=64 maxlatency=4 mingnt=3 resources: irq:17 memory:d0007000-d00077ff memory:d0000000-d0003fff *-storage description: Mass storage controller product: 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) vendor: Texas Instruments physical id: 4.2 bus info: pci@0000:0a:04.2 version: 00 width: 32 bits clock: 33MHz capabilities: storage pm bus_master cap_list configuration: driver=tifm_7xx1 latency=64 maxlatency=4 mingnt=7 resources: irq:17 memory:d0005000-d0005fff *-generic description: SD Host controller product: PCIxx12 SDA Standard Compliant SD Host Controller vendor: Texas Instruments physical id: 4.3 bus info: pci@0000:0a:04.3 version: 00 width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: driver=sdhci-pci latency=64 maxlatency=4 mingnt=7 resources: irq:17 memory:d0007800-d00078ff *-network description: Ethernet interface product: PRO/100 VE Network Connection vendor: Intel Corporation physical id: 8 bus info: pci@0000:0a:08.0 logical name: eth0 version: 02 serial: 00:16:36:80:e9:92 size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e100 driverversion=3.5.24-k2-NAPI duplex=half latency=64 link=no maxlatency=56 mingnt=8 multicast=yes port=MII speed=10Mbit/s resources: irq:20 memory:d0006000-d0006fff ioport:2000(size=64) *-isa description: ISA bridge product: 82801GBM (ICH7-M) LPC Interface Bridge vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 02 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: driver=lpc_ich latency=0 resources: irq:0 *-ide description: IDE interface product: 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 version: 02 width: 32 bits clock: 66MHz capabilities: ide pm bus_master cap_list configuration: driver=ata_piix latency=0 resources: irq:19 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:18b0(size=16) *-serial UNCLAIMED description: SMBus product: NM10/ICH7 Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 02 width: 32 bits clock: 33MHz configuration: latency=0 resources: ioport:18c0(size=32) *-scsi physical id: 1 logical name: scsi0 capabilities: emulated *-disk description: ATA Disk product: ST9250421AS vendor: Seagate physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: SD13 serial: 5TH0B2HB size: 232GiB (250GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 sectorsize=512 signature=000d7fd5 *-volume:0 description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: / version: 1.0 serial: 13bb4bdd-8cc9-40e2-a490-dbe436c2a02d size: 230GiB capacity: 230GiB capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2014-06-01 17:37:01 filesystem=ext4 lastmountpoint=/ modified=2014-06-01 21:15:21 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2014-06-01 21:15:21 state=mounted *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 2037MiB capacity: 2037MiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 2037MiB capabilities: nofs *-remoteaccess UNCLAIMED vendor: Intel physical id: 1 capabilities: inbound kyra@kyra-Satellite-P105:~$

  Read the article

• What seems to be plaguing my hard drives?

  - by Craig

  In a little bit of a tech nightmare here. I know oodles about software, not so much more than the above average user about hardware. I recently had to toss an old desktop of mine. It was gradually getting slower and slower, and after shutting the desktop down for long periods of time, it would choke up upon startup. Sometimes it'd give a disk read error, sometimes say no OS was found, etc. Restarting it about 5-15 times would eventually boot properly. Weird. I also noticed that startup programs were going missing, Dropbox was reindexing my entire folder, and Backblaze was backing up less than the number of files that it should. This lead me to believe it was probably a hard drive issue. I began to wonder why I'd have hard drive issues, and came to closure when I assumed it was because of recent power surges and outages. I'm sure that does a number on the drive. I bought a new desktop recently. It's not a beast or anything, but it's enough for what I do. It's an eMachines (I know, I know) Ultra-Slim (http://www.amazon.com/eMachines-Ultra-Slim-ER1401-57-Desktop-PC/dp/B00475OG9U). This is ideal for me because it's small and portable. It comes with an AC adapter and battery, like a laptop. Just to be safe, I bought an uninterruptable power supply on top of that. It's basically protected completely from any outages that might scramble the drive. I set this up a few days ago and for the past few days I've been perfecting settings, downloading the usual applications, etc. Two days ago, I noticed Dropbox was reindexing my entire Dropbox folder. I installed both Dropbox and Backblaze on this system, but it is very much more lightweight than the other. Only about 15 third-party applications installed. I thought that maybe Dropbox and Backblaze were stressing my system, so I turned off Backblaze. Still, Dropbox runs and comes across this infinite reindex issue. I noticed that upon a reboot recently, two applications did not start on startup either. Also, much like my old desktop, every 3rd or 4th reboot, I'll be forced into a chkdsk. This makes me incredibly nervous. What could possibly be going wrong with my old, years-old desktop that is immediately causing the same issues to my new one? I've considered all of the basics. I'm in a very air conditioned room. I take run routine virus scans. I'd like to think I take care of my systems very well. What is this issue that is haunting me? There's always the possibility that this new desktop has a junk hard drive, but it just seems way too coincidental.

  Read the article

• Web hosting providers for businesses (with offsite backups, disaster recovery options, etc.) [closed]

  - by Harry Muscle

  Possible Duplicate: How to find web hosting that meets my requirements? I'm wondering if anyone can point me in the direction of a couple of web hosting providers that are geared towards businesses. By this I mean providers that make it easy to create daily off site backups, are aware that websites require disaster recovery options and have these in place or are able to assist with them, etc. We currently have about a dozen sites with various providers, however, I've been asked to consolidate all of these into one provider and create a full disaster recovery plan. Unfortunately it seems like most providers are geared towards average users that don't require all these extra bells and whistles that businesses need. For example, HostGator, which is a very popular and well reviewed provider, doesn't even allow you to schedule full backups, they have to be manually requested via cPanel and then downloaded once available. If anyone can point out a couple companies that might be able to help with these sorts of things that would be much appreciated. Thanks, Harry P.S. I should also add that we are hoping to stay away from having to manage our own server, we're hoping for a fully managed solution like what HostGator would offer for example.

  Read the article

• Can't mount my USB Drive

  - by user996056

  ~> sudo mount /dev/sdb1 /media/Disk Did not find any restart pages in $LogFile and it was not empty. The file system wasn't safely closed on Windows. Fixing. I have a USB Hard Disk and Windows can't detect it. So I tried to open it up on Ubuntu using gparted. Gparted detects the NTFS partition, so everything seems to be fine (note, though, that the total size of the files in this disk is over 1 TB). I tried to mount it using: sudo mount /dev/sdb1 /media/Disk But I got: Did not find any restart pages in $LogFile and it was not empty. The file system wasn't safely closed on Windows. Fixing. Then, the process just sits there blinking. Any ideas on how to fix it? It's taking forever ( 10 minutes), should I wait or cancel it and do something else? Thank you in advance.

  Read the article

• How can I restore my laptop from Windows 7 to its original Windows Vista recovery partition?

  - by Cam Jackson

  I bought my Acer laptop 4 years ago with Vista Home Premium x86. It has a recovery partition that I have used successfully in the past to format everything and reinstall Windows to factory settings. I have since upgraded to Windows 7, but I now need to get back to my original installation. Not sure what it's called, but I can successfully get into this recovery thingy: However, when I click the third option (for me I think it says 'Windows Image Recovery' or something like that) it tells me that it can't find any images to recover from :( I have checked and I don't have a windows.old that I can recover from either. One final note, if I launch diskmgmt.msc, these are the partitions: Why is the first partition shaded? Does that mean anything? Both of the 'unlettered' partitions are 100% empty. Did the Windows 7 upgrade process format my Vista system recovery partition?! And finally: How can I get back to my factory settings? EDIT: I did see this question, but neither of the answers apply to my situation. Edit to address jdh's answer: From what I can tell, I never get the option to boot the Vista recovery partition. After hitting F10, I get this screen, except it's partition 2, and I don't have the IN/MINT bit: I hit Escape, and then I get this screen, except without Ubuntu listed, and without the auto-countdown thing: I hit F8, and then I get this screen: I hit Enter on the first option, I end up at the screen in the first screen shot. As I said, from there I click the third option, and it fails to find the image, which I guess makes sense if it's only looking for a Windows 7 recovery. So I either need to make the Windows 7 tool see the Vista recovery partition, or I need the boot loader (?) to let me select Vista earlier in the process. Any ideas?

  Read the article

• RAR Password recovery / hash extraction on Mac OS X

  - by Josh K

  I'm running Mac OS X 10.6.2 and have been handed a couple of old files that need to be extracted. Old backups or finances or bills I believe. They are RAR files, and password protected. Is there a way to extract the hash from these files so I can feed it into John The Ripper or Cain and Abel? Edit I have downloaded cRARk, but unfortunately nothing I have (SimplyRAR, RAR Expander, The Unarchiver) will extract it without a password. Can someone verify that I'm crazy and there is no password on the Mac version?

  Read the article

• Data Recovery from Tru64 Unix..

  - by RBA

  Hi I accidently deleted a directory in Tru64 unix Server. Is it possible to retrieve back the directory.. It contained many other directories and Anyhow I need to retrieve the data as it was a very important directory.. Kindly let me know the process or some good website which details about the particular scenario.. Thanks.

  Read the article

• RAR Password recovery / hash extraction on OS X

  - by Josh K

  I'm running 10.6.2 and have been handed a couple of old files that need to be extracted. Old backups or finances or bills I believe. They are RAR files, and password protected. Is there a way to extract the hash from these files so I can feed it into John The Ripper or Cain and Abel? Edit I have downloaded cRARk, but unfortunately nothing I have (SimplyRAR, RAR Expander, The Unarchiver) will extract it without a password. Can someone verify that I'm crazy and there is no password on the Mac version?

  Read the article

• innodb recovery from .ibd files

  - by mr heLL

  My website has crashed a few days ago. The hosting company says some innodb database crashed. They sent a MySql data folder. I tried to restore the database, but phpmyadmin is only showing MyISAM tables. I checked the database with navicat. When I click innodb table, I got this error table 'xyz.wp_posts' doesn't exist. is there anyway to fix this on windows? Feel free to download db: www.degisimanaliz.com/xyzdb.tar.gz Very old backup: www.degisimanaliz.com/29_Ocak_Yedek_deganaliz.sql.gz

  Read the article

• Restoring factory image of HP Laptop

  - by Ahmed

  I use a HP G62. I am unable to use my recovery disk to restore to factory settings. I had no problems earlier until I created an additional partition which I hear might have changed my hard disk to dynamic. How do I get back to 'normal'? I don't mind formatting the disk. I just want my factory OS back. .............. i get an error message at about 69 percent telling me that the restoration process failed. I'm using the factory image disks i created using the hp recovery manager. I have tried formating the hard drive clean and then restoring woth the cd, it didn't work. I was always able to restore before i created that partition.

  Read the article

• Secondary drive corrupted/not reading

  - by Sebastian

  When I connect my Seagate Barracuda to the computer, it shows up on the list of drives in Windows Explorer, but right clicking on it crashes Windows Explorer, opening it won't do anything, and I cannot start disk manager when it is connected. Trying to search the drive also freezes Windows Explorer. I have tried to run CHKDSK on it, and it was "unable to read $J data stream" for the Usn Journal. Also, it was an internal drive, but I pulled it out and hooked it up externally so I could test if it was that drive causing the problems. Is there any way for me to copy the files off of the drive?

  Read the article

• WebSphere 7 password recovery

  - by heavybytes

  On my local box I have RAD 7.5 and WebSphere 7. When I run the administrative console it asks me for the username/password. I tried all the default password/users combinations wasadmin/wasadmin wasadmin/wsadmin and so on an none of the works. How do I recover my password/username? Thank you very much.

  Read the article

• You need to format the disk in drive

  - by Sab

  I was copying some files over to my external hard disk and suddenly a message popped up saying that some file was open and it could not continue.It asks me whether I want to cancel the operation and I said cancel(The other operation was continue.) After that whenever I plug in the usb into the same computer it does not work. It keeps saying that I need to format the disk to continue. Luckily for me it opened on another computer and am backing up all my data. But now I am wondering why exactly this happened. Is it that the hard disk is weak. Also as an addon I currently use http://www.dtidata.com/windowssurfacescanner/ program to check for bad sectors. Is this the recommended way or is there some other better more reliable way to check if my hard disk is failing? Also could the above problem be because the hard disk is failing? If not why does it happen.Even if the hard disk is interrupted in the middle of a read write cycle doesnt there exist error handling code to enable gracefull recovery?

  Read the article

• Sharing Windows 7 Hard drive with Windows XP Hard drive

  - by Ginzo Milani

  I wish to share my hard drives between my two computers but I seem to be running along some sort of error... my windows XP Computer is picking up my "XGaming" hard drive but when clicked it says access is denied, despite there is no password set up(I followed this: http://www.howtogeek.com/howto/windows-7/share-files-and-printers-between-windows-7-and-xp/) I also tried to share my C and J drives on my windows XP computer but my windows 7 computer doesn't seem to even detect them!

  Read the article

< Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >