Search Results

Search found 2482 results on 100 pages for 'hp officejet'.

Page 22/100 | < Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >

• 12.10 upgrade broke brightness keys [closed]

  - by Chris Morgan

  I have been running Ubuntu (64-bit) on my HP 6710b laptop (Core 2 Duo with integrated graphics) for several years, and the backlight brightness keys have always worked. Since I upgraded to Ubuntu 12.10 earlier today, those keys do not work any more. The secondary function keys: Fn+F3: sleep; still works (and considerably faster than ever before!) Fn+F8: battery info; still works Fn+F9: reduce brightness; stopped working in 12.10 Fn+F10: increase brightness; stopped working in 12.10 It may also be worth while mentioning that X does not appear to be receiving the brightness events at all, or at least not sending them out further. (This I detected with a key logger I wrote for a Uni project, which uses X's Record extension; it is informed of the sleep and battery info keystrokes, but doesn't receive the brightness ones at all.) In the mean time, I know that I can use the Brightness & Lock settings screen to alter the brightness. (Wow! I can suddenly make my backlight darker than I could before—I can go right down to turning the backlight off, something I couldn't do before... but this model has a fairly dim screen, so I don't expect to use that much, if ever.) How can I get the brightness keys working again? This question is probably strongly related to I can't control my Brightness in HP Compaq 6710s.

  Read the article

• Integration against HP uCMDB

  - by thehhv

  Hi, I need to implement an integration between HP uCMDB and another system. The documentation refers to following components: import com.hp.ucmdb.generated.services.UcmdbService; import com.hp.ucmdb.generated.services.UcmdbServiceStub; import com.hp.ucmdb.generated.types.CmdbContext; Does anybody know where I can find these libraries? I am assuming they are somewhere on the uCMDB server, but where exactly? I do not have access to the server, so I have to tell the IT Professional where to find and what to send.

  Read the article

• Printer options follow Office documents

  - by tkalve

  One person (John) creates an Office document, and prints this document to his HP printer which is using HP Universal Printing PS (v4.7) driver. He has got Job Storage (Personal job) enabled for this printer, with custom username and a personal PIN. He later sends this document in an e-mail to his colleagues. Another person (Anne) opens the document, and tries to print the document to her HP printer (also using HP Universal Printing driver), but is not able to fetch it on the printer. The Job Storage options from Johns computer follows the Office Excel document, so Anne has to change this manually to her username and her PIN before she can print. What on earth is causing this, and how do we fix it?

  Read the article

• CPQLOFG XML "Syntax error"

  - by Andrew J. Brehm

  HP Lights-Out Configuration Utility- CPQLOCFG v. 4.00 dated 04/04/2012 Whatever input I use, whether a sample file from the HP Web site, whether an empty file or whether a file just containing <RIBCL VERSION="2.0"> </RIBCL> the HP utility always returns CHECKING XML SYNTAX... 1 - Syntax error: Line #0: syntax error near "" in the line: "" What's wrong with me or the utility? Did anyone ever get this to work?

  Read the article

• Laptop wont start after BIOS update

  - by Maven

  I have a HP Probook 4540s i recently update its BIOS from HP's site after the installation the notebook re started but since after that there is no display i waited for an hour until the battery ran off after when i plugged in its same: Capslock is contunously blinking Fan is running faster than the usual speed i can tell this from the sound And no display i waited for more than hour for any response but no gain. Searched Internet and find out that alot people fails to update their BIOS in HP laptop i dont know why official HP sites has such updates even avaialble. Is there a way i can reset the BIOS, Hard reset, through USB of something i have another PC over which i can download anything if its required? Can anyone please help.

  Read the article

• HP Loadrunner failed to start .NET Diagnostics probe

  - by Johnbo

  I've got a HP Diagnostics Server (commander mode) installed in the same PC where HP Loadrunner is. I've installed the .NET probe in the web application server. When I navigate localhost:2006/registrar/health I can see the CommandingServer and three instances of the probe, all in green and connected. Then, when in LoadRunner controller I enable Diagnostics, select the probe and start the scenario, I get the next error: Failed to start J2EE/.NET Diagnostics run. (Facade error: Unable to send 'startRun' notification to probe MyAgent.1347615505142149) I've looked at the firewall logs and the rule that lets the server send commands to the probes has been matched three times. What else could it be what doesn't let me start the probe?

  Read the article

• Monitoring HP and Dell hardware in Gentoo.

  - by ewwhite

  I'm working in an environment that features a large number of Gentoo servers running on HP ProLiant and Dell PowerEdge equipment. While I've moved some of these systems to RedHat or CentOS for consistency, I'm still left with a good number of systems that will remain Gentoo. One of the issues I see with the Gentoo arrangement is lack of vendor-supported hardware monitoring. There doesn't seem to be an equivalent to the HP ProLiant Support Pack or Dell's agents for Gentoo. Is this simply something that you give up when using this distribution? How do you monitor hardware health and the like with Gentoo systems?

  Read the article

• Sharing hp Deskjet F380 using cups via http driver issues with xp client

  - by ageis23

  Hi the problem is xp doesn't have built in drivers for my printer but vista does. On vista it works perfectly without any issues. However when I try using xp, it insists that I select a driver from the selection xp offers by default. The drivers I've downloaded from HP don't support networking. Hp have stated they're non networkable. Is there anything I can do about this? Any help is greatly appreciated and would save me getting ear ache!

  Read the article

• HP Envy 14, Ubuntu 10.10 and trouble with the graphics cards

  - by Carsten Gehling

  A few days ago I bought a HP Envy 14, containing 2 graphics card: An integrated Intel graphics card, and an ATI HD 5650. I've installed Ubuntu 10.10 32-bit on the machine. Most things work fine out of the box, but the graphics cards are giving me trouble. When booting, I get the message "failed to get i915 symbols, graphics turbo disabled". Then the screen blanks out during the remaining boot period. I am able to get the display working by changing to one of the consoles, then closing and opening the laptop's lid. It seems that Ubuntu gets confused about which card to use. I've read here: http://www.andreas-demmer.de/en/2010/07/18/testbericht-linux-auf-dem-hp-envy-14 that I should be able to turn off one the cards by echoing keywords into /sys/kernel/debug/vgaswitcheroo/switch, but that path is not available on my system. The BIOS does not have any methods to switch of the ATI card. Help anyone? /Carsten

  Read the article

• Change Default Gateway on HP Enclosure C-Class Virtual Connect

  - by Danilo Brambilla

  How do I change management default gateway on HP Enclosure C-Class Virtual Connect modules? Thank you all for help

  Read the article

• Win 7 software and HP hardware

  - by iggy12

  Would installing an OEM version of windows 7 on a laptop--specifically The HP G61-320US interfere with any proprietary hardware?

  Read the article

• HP Blade ILO not responding in chassis ILO

  - by bobinabottle

  I have just started at a new company and I am inspecting their current server config. The HP 480c blades in a c7000 chassis aren't responding to ILO, although the chassis ILO is working fine. I have a feeling the last sysadmin configured the blades ILO as static IPs and it is not responding correctly. The servers are sitting in a datacenter and I'm hoping to be able to fix this remotely. Is there a way that I can change the ILO static IPs for the blades remotely? If not and I do have to go onsite, how do I change the IP addresses of the ILO for the blades? (Sorry I'm not very familiar with HP servers) thanks for you help!

  Read the article

• Find BIOS update for HP Pavilion xt966

  - by NitroxDM

  I installed FreeNAS on a HP Pavilion xt966. Every three seconds or so I message comes up on the console. acpi_tz0: _TMP value is absurd, ignored (-270.2C) From what I have been able to find this is because of a bug in the BIOS... but I have yet to find an update for it. HP's site only shows drivers. FreeNAS is build on BSD. Anyone know where to find a BIOS update for this unit?

  Read the article

• Deafault password for hp c7000 blade servers.

  - by stillStudent

  Has anybody worked on hp c7000 blade servers before. I have just ordered them and brought them on network. I tried logging in from web browser but I do not have the default password to log in. User guide says default password is provided with the tag supplied with the KVM module but I did not find any such tag. I am also working with hp customer care but it's taking too much time. So posted here to get some quick help from you guys. Thanks!

  Read the article

• Upgrading RAM in HP Compaq d530

  - by Mike

  I want to upgrade my hp compaq d530 from 1.2GB to 4GB of RAM. I look at the specs: http://h18000.www1.hp.com/products/quickspecs/11632_ca/11632_ca.html and saw that I could get up to 4GB of RAM that is DDR, PC3200. So, I got 4GB of RAM. I ordered 4 of these http://www.ebay.com/itm/190398777195?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649. When I installed all 4 I get 5 beeps and 5 red blinks which I've concluded means I'm having a memory problem. When I switch back to 1.2 GB it works fine. I was wondering, am I doing something wrong?

  Read the article

• On HP Mini, unable to select 800x600 resolution

  - by Roboto

  I have an HP Mini laptop. I can only make resolution setting for my display of 1024x576. The HP Deskjet 6988 driver only allows resolution settings of 800x600. I don't care how 800x600 would look on my laptop, I only want to install the driver for the printer and set it back. I went into the registry, but it was showing a resolution setting of 800x600. How else can I set the resolution or at least add the option in my Display Properties for 800x600?

  Read the article

• hp g7-1070us does not post to windows

  - by lexlyn4

  Ok basically my laptop screen is broken and only a small portion of the screen is viewable. When I boot my laptop it gets to a screen where it shows startup/hp.com. That's all I can see because of the screens state. I can enter bios bit again cannot see much. My laptop is an hp g7-1070us and I was thinking of hooking it up to a monitor then going into the bios but that's not possible unless the computer posts to windows. So I don't care about the data all I want is to boot to windows. I'm wondering if I insert a copy of windows,7 and do,a,clean install will,it work. I don't have the cd yet but working on it. I need help please

  Read the article

• HP LaserJet 1020 doesn't print

  - by Rod

  I've got a HP LaserJet 1020 printer connected to my 64-bit Windows 7 Ultimate machine. I'm sharing this printer out. Got another 64-bit Windows 7 machine, with Home Premium. I installed the printer driver from HP for 64-bit on both machines. However, the strange thing is that if the Home Premium machine prints something, it never comes out unless I reboot the Ultimate machine. This is less than optimal. Any idea what's causing this and if there's anything I can do about it?

  Read the article

• Configuring mouse buttons

  - by Gilad Naaman

  I am using a HP NK527AA Wireless mouse with two side buttons. His mouse wheel is half broken: I can scroll but I can't click it. In windows I configured the side buttons as 3rd mouse button but unfortunately the only available drivers are for windows. Ubuntu treats the side-buttons as back\forward buttons and it's really annoying. Is there a way to configure the buttons if though the is no driver?

  Read the article

• hpdv6 6080 two graphic card

  - by Taher

  My laptop has two graphic card one is ati radeon 6770m and other intel sandybridge. i install ati driver from repository but i can't select ati as my graphic card after installing ati ubuntu lose 3d mode how can i set graphic card? and switch between two graphic cards? or how can i set one of them? my laptop is hp dv6 6080 and i add blacklist radeon to /etc/modprobe.d/blacklist.conf and add below lines to /etc/rc.local file: modprobe radeon echo OFF /sys/kernel/debug/vgaswitcheroo/switch exit 0

  Read the article

• No Option To Duel Boot Ubuntu 12.04 USB

  - by Jordan

  I have used universal usb installer on my HP probook 2000 on my Kingston data traveler (8GB). When I boot I select to boot from USB and then click on Install Ubuntu 12.04 LTS, I get to the partition part, but there is no option to keep existing Windows and dual boot. I only have Erase entire disk and something else. How can I get this dual boot to come up? Screen Shot Here I also cannot use a CD/DVD

  Read the article

• Why won't my Broadcom BCM4312 LP-PHY work with the STA driver?

  - by Jackson Taylor

  I tried the steps here for a 4312: https://help.ubuntu.com/community/WifiDocs/Driver/bcm43xx Both of these: sudo modprobe -r b43 ssb wl sudo modprobe wl return: FATAL: Module wl not found. FATAL: Error running install command for wl (this one is only for the second one actually) I tried the broadcom-sta, didn't work. What's confusing is down below in the next steps for STA with internet access it says to use the bcmwl one. So I install that and it succeeds but with some errors: sudo apt-get install bcmwl-kernel-source Reading package lists... Done Building dependency tree Reading state information... Done The following package was automatically installed and is no longer required: module-assistant Use 'apt-get autoremove' to remove it. The following NEW packages will be installed: bcmwl-kernel-source 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 0 B/1,181 kB of archives. After this operation, 3,609 kB of additional disk space will be used. Selecting previously unselected package bcmwl-kernel-source. (Reading database ... 168005 files and directories currently installed.) Unpacking bcmwl-kernel-source (from .../bcmwl-kernel-source_5.100.82.112+bdcom-0ubuntu3_amd64.deb) ... Setting up bcmwl-kernel-source (5.100.82.112+bdcom-0ubuntu3) ... Loading new bcmwl-5.100.82.112+bdcom DKMS files... Building only for 3.5.0-21-generic Building for architecture x86_64 Module build for the currently running kernel was skipped since the kernel source for this kernel does not seem to be installed. ERROR: Module b43 does not exist in /proc/modules ERROR: Module b43legacy does not exist in /proc/modules ERROR: Module ssb does not exist in /proc/modules ERROR: Module bcm43xx does not exist in /proc/modules ERROR: Module brcm80211 does not exist in /proc/modules ERROR: Module brcmfmac does not exist in /proc/modules ERROR: Module brcmsmac does not exist in /proc/modules ERROR: Module bcma does not exist in /proc/modules FATAL: Module wl not found. FATAL: Error running install command for wl update-initramfs: deferring update (trigger activated) Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.5.0-21-generic jtaylor991@jtaylor991-whiteHP:~$ sudo modprobe wl FATAL: Module wl not found. FATAL: Error running install command for wl Then I do the modprobe wl commands listed above and it gives the above listed errors. It didn't work with the broadcom-sta driver either. I installed the b43 ones but nothing happened, and I don't know why so those are still installed. firmware-b43legacy-installer, b43-fwcutter and firmware-b43-lpphy-installer (yes it is a LP-PHY) are currently installed. If I go into System Settings Software Sources Additional Drivers it says "Using Broadcom 802.11 Linux STA wireless driver source from bcmwl-kernel-source (proprietary) But bcmwl-kernel-source isn't installed. I could try again but I remember rebooting and it still said this. What's funny is it found wireless networks during the Ubuntu setup/installation, I don't remember if I got it to connect or not though. I think it kept asking for a password when I put it in (yes it was right I showed password and looked at it) so I just ignored it. But right now the Enable Wireless option in the top right is just gone, it's just Enable Networking and I'm on ethernet on this HP Pavilion dv4-1435dx right here. If I run rfkill list it shows: 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no It was hard blocked at the beginning but unblocking it makes no change. Also it's a touch sensitive button, and it appears to be always orange no matter if it's enabled or not because when I touch it the hard blocked changes between yes and no in rfkill list. I think it was blue for a minute at one point. What is going on?!?! Help me! Lol, thanks for any and all of your time guys. Oh yeah this is Ubuntu 12.10 fresh install.

  Read the article

• Proliant server will not accept new hard disks in RAID 1+0?

  - by Leigh

  I have a HP ProLiant DL380 G5, I have two logical drives configured with RAID. I have one logical drive RAID 1+0 with two 72 gb 10k sas 1 port spare no 376597-001. I had one hard disk fail and ordered a replacement. The configuration utility showed error and would not rebuild the RAID. I presumed a hard disk fault and ordered a replacement again. In the mean time I put the original failed disk back in the server and this started rebuilding. Currently shows ok status however in the log I can see hardware errors. The new disk has come and I again have the same problem of not accepting the hard disk. I have updated the P400 controller with the latest firmware 7.24 , but still no luck. The only difference I can see is the original drive has firmware 0103 (same as the RAID drive) and the new one has HPD2. Any advice would be appreciated. Thanks in advance Logs from server ctrl all show config Smart Array P400 in Slot 1 (sn: PAFGK0P9VWO0UQ) array A (SAS, Unused Space: 0 MB) logicaldrive 1 (68.5 GB, RAID 1, Interim Recovery Mode) physicaldrive 2I:1:1 (port 2I:box 1:bay 1, SAS, 73.5 GB, OK) physicaldrive 2I:1:2 (port 2I:box 1:bay 2, SAS, 72 GB, Failed array B (SAS, Unused Space: 0 MB) logicaldrive 2 (558.7 GB, RAID 5, OK) physicaldrive 1I:1:5 (port 1I:box 1:bay 5, SAS, 300 GB, OK) physicaldrive 2I:1:3 (port 2I:box 1:bay 3, SAS, 300 GB, OK) physicaldrive 2I:1:4 (port 2I:box 1:bay 4, SAS, 300 GB, OK) ctrl all show config detail Smart Array P400 in Slot 1 Bus Interface: PCI Slot: 1 Serial Number: PAFGK0P9VWO0UQ Cache Serial Number: PA82C0J9VWL8I7 RAID 6 (ADG) Status: Disabled Controller Status: OK Hardware Revision: E Firmware Version: 7.24 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 15 secs Surface Scan Mode: Idle Wait for Cache Room: Disabled Surface Analysis Inconsistency Notification: Disabled Post Prompt Timeout: 0 secs Cache Board Present: True Cache Status: OK Cache Status Details: A cache error was detected. Run more information. Cache Ratio: 100% Read / 0% Write Drive Write Cache: Disabled Total Cache Size: 256 MB Total Cache Memory Available: 208 MB No-Battery Write Cache: Disabled Battery/Capacitor Count: 0 SATA NCQ Supported: True Array: A Interface Type: SAS Unused Space: 0 MB Status: Failed Physical Drive Array Type: Data One of the drives on this array have failed or has Logical Drive: 1 Size: 68.5 GB Fault Tolerance: RAID 1 Heads: 255 Sectors Per Track: 32 Cylinders: 17594 Strip Size: 128 KB Full Stripe Size: 128 KB Status: Interim Recovery Mode Caching: Enabled Unique Identifier: 600508B10010503956574F305551 Disk Name: \\.\PhysicalDrive0 Mount Points: C:\ 68.5 GB Logical Drive Label: A0100539PAFGK0P9VWO0UQ0E93 Mirror Group 0: physicaldrive 2I:1:2 (port 2I:box 1:bay 2, S Mirror Group 1: physicaldrive 2I:1:1 (port 2I:box 1:bay 1, S Drive Type: Data physicaldrive 2I:1:1 Port: 2I Box: 1 Bay: 1 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 73.5 GB Rotational Speed: 10000 Firmware Revision: 0103 Serial Number: B379P8C006RK Model: HP DG072A9B7 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 2I:1:2 Port: 2I Box: 1 Bay: 2 Status: Failed Drive Type: Data Drive Interface Type: SAS Size: 72 GB Rotational Speed: 15000 Firmware Revision: HPD9 Serial Number: D5A1PCA04SL01244 Model: HP EH0072FARUA PHY Count: 2 PHY Transfer Rate: Unknown, Unknown Array: B Interface Type: SAS Unused Space: 0 MB Status: OK Array Type: Data Logical Drive: 2 Size: 558.7 GB Fault Tolerance: RAID 5 Heads: 255 Sectors Per Track: 32 Cylinders: 65535 Strip Size: 64 KB Full Stripe Size: 128 KB Status: OK Caching: Enabled Parity Initialization Status: Initialization Co Unique Identifier: 600508B10010503956574F305551 Disk Name: \\.\PhysicalDrive1 Mount Points: E:\ 558.7 GB Logical Drive Label: AF14FD12PAFGK0P9VWO0UQD007 Drive Type: Data physicaldrive 1I:1:5 Port: 1I Box: 1 Bay: 5 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 300 GB Rotational Speed: 10000 Firmware Revision: HPD4 Serial Number: 3SE07QH300009923X1X3 Model: HP DG0300BALVP Current Temperature (C): 32 Maximum Temperature (C): 45 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 2I:1:3 Port: 2I Box: 1 Bay: 3 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 300 GB Rotational Speed: 10000 Firmware Revision: HPD4 Serial Number: 3SE0AHVH00009924P8F3 Model: HP DG0300BALVP Current Temperature (C): 34 Maximum Temperature (C): 47 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 2I:1:4 Port: 2I Box: 1 Bay: 4 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 300 GB Rotational Speed: 10000 Firmware Revision: HPD4 Serial Number: 3SE08NAK00009924KWD6 Model: HP DG0300BALVP Current Temperature (C): 35 Maximum Temperature (C): 47 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown

  Read the article

• HP DL160G6 bios update fails

  - by Bojo

  I tried to update the BIOS from my HP DL160G6's. Unfortunately the Windows update degraded my BIOS version from 243 to 237. But when I try to upgrade both servers to version the update fails. First I got a warning like: CMOS Layout difference between System ROM and ROM file has detected. AFU recommand (sic) adding /C commands of your original input commands. Press "A" to accept AFU's recommendation. Press "F" to keep original input commands. And the update did not do anything. But now I get a message like: Reading flash ........ done Bootblock checksum ... ok Module checksums ..... bad Error: BIOS checksum error And the update stops. I tried some commands form this page: http://www.ami.com/support/downloads/txt/AFU_README.TXT But I don't try to much, the servers are still booting. Does anyone know how to update my servers to BIOS version 245? I used this version http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3884344&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253DMTX_7bd12651ab954fdcb0d7ee164a%257CswEnvOID%253D54%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken and created a bootable USB stick sith HPQUSB.exe

  Read the article

• HP Storageworks 448 tape drive input/output error with Ubuntu

  - by Dan D

  I'm trying to set a backup to tape of a machine using flexbackup. However any attempt to write to the tape drive (via either flexbackup or just tar) results in "/dev/st0: Input/output error" The machine seems to recognise the drive (HP Storageworks Ultrium 448) and that there's a tape in it and "mt status" seems to work... "mt -f /dev/st0 rewind" or "erase" throw no errors... root@stor001:/# mt status SCSI 2 tape drive: File number=0, block number=0, partition=0. Tape block size 0 bytes. Density code 0x42 (LTO-2). Soft error count since last status=0 General status bits on (41010000): BOT ONLINE IM_REP_EN root@stor001:/# cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: HL-DT-ST Model: DVDRAM GSA-4084N Rev: KS02 Type: CD-ROM ANSI SCSI revision: 05 Host: scsi2 Channel: 00 Id: 03 Lun: 00 Vendor: HP Model: Ultrium 2-SCSI Rev: S65D Type: Sequential-Access ANSI SCSI revision: 03 "tell" does however root@stor001:/# mt -f /dev/st0 tell /dev/st0: Input/output error Based on a forum post I found, I tried: root@stor001:/# dd if=/dev/zero of=/dev/nst0 bs=1024 count=10 10+0 records in 10+0 records out 10240 bytes (10 kB) copied, 5.0815 s, 2.0 kB/s which gave the person on the forum an error but seems to work for me. If anyone has any suggestions, I'm all ears...

  Read the article

< Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >