Search Results

Search found 20299 results on 812 pages for 'git log'.

Page 220/812 | < Previous Page | 216 217 218 219 220 221 222 223 224 225 226 227  | Next Page >

  • Running django custom management commands with supervisord

    - by mfsaint
    I'd like to use supervisord to run some commands for my Django project but I keep getting the following error: supervisor.log: 2012-05-18 17:52:15,784 INFO spawnerr: can't find command 'source' If I remove the "source" command, the log shows the same error: can't find command 'python'. supervisord.conf excerpt: [program:django] directory=/home/mf/projects/djangopj/ command=beanstalkd -l 127.0.0.1 -p 11300 command=source /home/mf/virtualenvs/env/bin/activate command=python manage.py command1 command=python manage.py command2 user=mf autostart=true autorestart=true I tried removing the directory and adding the absolute path to the commands but I kept getting the same error. I run supervisord with the following command: supervisord -c supervisord.conf -l supervisor.log

    Read the article

  • Can snort output an alert for a portscan (sfPortscan) to syslog?

    - by Jamie McNaught
    I've been working on this for too long now. I'm sure the answer should be obvious, but... Snort manual: http://www.snort.org/assets/125/snort_manual-2_8_5_1.pdf lists two logging outputs on pg 39 (pg 40 according to Acrobat Reader) as: "Unified Output" and "Log File Output" which I am guessing the former refers to the "unified" output mode... which makes me think the answer is "No, snort cannot output alerts for detected portscans to syslog." Config file I've been using is: alert tcp any 80 -> any any (msg:"TestTestTest"; content: "testtesttest"; sid:123) preprocessor sfportscan: proto { all } \ memcap { 10000000 } \ scan_type { all } \ sense_level { high } \ logfile { pscan.log } (yes, very basic I know). A simple nmap triggers output to the pscan.log Can anyone confirm this? Or point out how I do this?

    Read the article

  • rdesktop over ssh

    - by Dan
    In Ubuntu, I'm trying to log into my friend's windows machine using rdesktop. First, I can log into his outward facing linux box using ssh. Then from there I can log into his linux host machine using ssh. This host machine is running Windows XP inside virtualbox. Is there a way for me to tunnel rdesktop through these two ssh connections (may just need the first connection to the outward facing linux box just to get inside the network, depending on how virtualbox's network connection is set up). Thanks

    Read the article

  • IIS 8 Random 503 service unavailable

    - by Ivo
    We migrated a busy website to Windows Server 2012 with IIS 8. The website randomly gives the error "503 service unavailable" after an user presses F5 the error is gone again. The website is build in ASP.NET MVC 3. The website runs on one application pool, with default settings There are around 500 to 900 concurrent users on the website during the day, and the error happens more often when there are more 650 users. The CPU and the memory use on the server is stable. There is nothing about the 503 errors in the application log, the IIS log and the event log. Does anyone has any clue what the problem can be or how we can trace the the problem?

    Read the article

  • Setting up fail2ban to ban failed phpMyAdmin login attempts

    - by Michael Robinson
    We've been using fail2ban to block failed ssh attempts. I would like to setup the same thing for phpMyAdmin as well. As phpMyAdmin doesn't log authentication attempts to a file (that I know of), I'm unsure of how best to go about this. Does a plugin / config exist that makes phpMyAdmin log authentication attempts to a file? Or is there some other place I should look for such an activity log? Ideally I will be able to find a solution that involved modifying fail2ban config only, as I have to configure fail2ban with the same options on multiple servers, and would prefer not to also modify the various phpMyAdmin installations on said servers.

    Read the article

  • Crypto-Analysis of keylogger logs and config file. Possible?

    - by lost.
    Is there anyway Encryption on an unidentified file can be broken(file in question: config file and log files from ardamax keylogger). These files date back all the way to 2008. I searched everywhere, nothing on slashdot, nothing on google. Ardamax Keyviewer? Should I just write to Ardamax? I am at a loss of what to do. I feel comprimised. Anyone managed to decrpyt files with Crypto-analysis? More Information-- There are log files in the folder and a configuration file, "akv.cfg". Is it possible to decrypt the files and maybe getting the attackers email address used to receive the keylogger logs? I've Checked ardamax.com. They have an built-in log viewer. But its unavailable for download. If superuser isn't the proper place to ask, know where I might get help?

    Read the article

  • iptables: How to read this OPT string?

    - by alex
    I have a simple INPUT rule for iptables that logs any new connections to a logfile. --log-tcp-options and --log-ip-options flags are both set and I get the appropriate OPT output. One line of my log looks something like this: Nov 29 17:00:00 IN=venet0 OUT= MAC= SRC=x.x.x.x DST=x.x.x.x LEN=64 TOS=0x00 PREC=0x00 TTL=53 ID=37898 DF PROTO=TCP SPT=57755 DPT=8888 WINDOW=65535 RES=0x00 SYN URGP=0 OPT (0204057D010303010101080A3E521D4D0000000004020000) I would like to understand how to interpret the OPT string (bold). Is there some documentation available on what it actually means? How could I make it human-readable?

    Read the article

  • Solaris Non global Zone x server

    - by ankimal
    I am not even sure if this is possible but how can I start an X server on a non-global zone? If I run startx from within my zone. I created the xorg.conf by running /usr/X11/bin/xorgconfig root@foo:/usr/X11/bin# startx xauth: creating new authority file /root/.serverauth.20957 X.Org X Server 1.5.3 Release Date: 5 November 2008 X Protocol Version 11, Revision 0 Build Operating System: SunOS 5.11 snv_108 i86pc Current Operating System: SunOS dsol101 5.11 snv_111b i86pc Build Date: 07 May 2009 04:44:56PM Solaris ABI: 64-bit SUNWxorg-server package version: 6.9.0.5.11.11100,REV=0.2009.05.07 SUNWxorg-mesa package version: 6.9.0.5.11.11100,REV=0.2009.04.02 Before reporting problems, check http://sunsolve.sun.com/ to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 10 19:17:53 2009 (==) Using config file: "/etc/X11/xorg.conf" Fatal server error: xf86OpenConsole: Cannot open /dev/fb (No such file or directory)

    Read the article

  • puppet master REST API returns 403 when running under passenger works when master runs from command line

    - by Anadi Misra
    I am using the standard auth.conf provided in puppet install for the puppet master which is running through passenger under Nginx. However for most of the catalog, files and certitifcate request I get a 403 response. ### Authenticated paths - these apply only when the client ### has a valid certificate and is thus authenticated # allow nodes to retrieve their own catalog path ~ ^/catalog/([^/]+)$ method find allow $1 # allow nodes to retrieve their own node definition path ~ ^/node/([^/]+)$ method find allow $1 # allow all nodes to access the certificates services path ~ ^/certificate_revocation_list/ca method find allow * # allow all nodes to store their reports path /report method save allow * # unconditionally allow access to all file services # which means in practice that fileserver.conf will # still be used path /file allow * ### Unauthenticated ACL, for clients for which the current master doesn't ### have a valid certificate; we allow authenticated users, too, because ### there isn't a great harm in letting that request through. # allow access to the master CA path /certificate/ca auth any method find allow * path /certificate/ auth any method find allow * path /certificate_request auth any method find, save allow * path /facts auth any method find, search allow * # this one is not stricly necessary, but it has the merit # of showing the default policy, which is deny everything else path / auth any Puppet master however does not seems to be following this as I get this error on client [amisr1@blramisr195602 ~]$ sudo puppet agent --no-daemonize --verbose --server bangvmpllda02.XXXXX.com [sudo] password for amisr1: Starting Puppet client version 3.0.1 Warning: Unable to fetch my node definition, but the agent run will continue: Warning: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /certificate_revocation_list/ca [find] at :110 Info: Retrieving plugin Error: /File[/var/lib/puppet/lib]: Failed to generate additional resources using 'eval_generate: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /file_metadata/plugins [search] at :110 Error: /File[/var/lib/puppet/lib]: Could not evaluate: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /file_metadata/plugins [find] at :110 Could not retrieve file metadata for puppet://devops.XXXXX.com/plugins: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /file_metadata/plugins [find] at :110 Error: Could not retrieve catalog from remote server: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /catalog/blramisr195602.XXXXX.com [find] at :110 Using cached catalog Error: Could not retrieve catalog; skipping run Error: Could not send report: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /report/blramisr195602.XXXXX.com [save] at :110 and the server logs show XX.XXX.XX.XX - - [10/Dec/2012:14:46:52 +0530] "GET /production/certificate_revocation_list/ca? HTTP/1.1" 403 102 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:52 +0530] "GET /production/file_metadatas/plugins?links=manage&recurse=true&&ignore=---+%0A++-+%22.svn%22%0A++-+CVS%0A++-+%22.git%22&checksum_type=md5 HTTP/1.1" 403 95 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:52 +0530] "GET /production/file_metadata/plugins? HTTP/1.1" 403 93 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:53 +0530] "POST /production/catalog/blramisr195602.XXXXX.com HTTP/1.1" 403 106 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:53 +0530] "PUT /production/report/blramisr195602.XXXXX.com HTTP/1.1" 403 105 "-" "Ruby" thefile server conf file is as follows (and goin by what they say on puppet site, It is better to regulate access in auth.conf for reaching file server and then allow file server to server all) [files] path /apps/puppet/files allow * [private] path /apps/puppet/private/%H allow * [modules] allow * I am using server and client version 3 Nginx has been compiled using the following options nginx version: nginx/1.3.9 built by gcc 4.4.6 20120305 (Red Hat 4.4.6-4) (GCC) TLS SNI support enabled configure arguments: --prefix=/apps/nginx --conf-path=/apps/nginx/nginx.conf --pid-path=/apps/nginx/run/nginx.pid --error-log-path=/apps/nginx/logs/error.log --http-log-path=/apps/nginx/logs/access.log --with-http_ssl_module --with-http_gzip_static_module --add-module=/usr/lib/ruby/gems/1.8/gems/passenger-3.0.18/ext/nginx --add-module=/apps/Downloads/nginx/nginx-auth-ldap-master/ and the standard nginx puppet master conf server { ssl on; listen 8140 ssl; server_name _; passenger_enabled on; passenger_set_cgi_param HTTP_X_CLIENT_DN $ssl_client_s_dn; passenger_set_cgi_param HTTP_X_CLIENT_VERIFY $ssl_client_verify; passenger_min_instances 5; access_log logs/puppet_access.log; error_log logs/puppet_error.log; root /apps/nginx/html/rack/public; ssl_certificate /var/lib/puppet/ssl/certs/bangvmpllda02.XXXXXX.com.pem; ssl_certificate_key /var/lib/puppet/ssl/private_keys/bangvmpllda02.XXXXXX.com.pem; ssl_crl /var/lib/puppet/ssl/ca/ca_crl.pem; ssl_client_certificate /var/lib/puppet/ssl/certs/ca.pem; ssl_ciphers SSLv2:-LOW:-EXPORT:RC4+RSA; ssl_prefer_server_ciphers on; ssl_verify_client optional; ssl_verify_depth 1; ssl_session_cache shared:SSL:128m; ssl_session_timeout 5m; } Puppet is picking up the correct settings from the files mentioned because config print command points to /etc/puppet [amisr1@bangvmpllDA02 puppet]$ sudo puppet config print | grep conf async_storeconfigs = false authconfig = /etc/puppet/namespaceauth.conf autosign = /etc/puppet/autosign.conf catalog_cache_terminus = store_configs confdir = /etc/puppet config = /etc/puppet/puppet.conf config_file_name = puppet.conf config_version = "" configprint = all configtimeout = 120 dblocation = /var/lib/puppet/state/clientconfigs.sqlite3 deviceconfig = /etc/puppet/device.conf fileserverconfig = /etc/puppet/fileserver.conf genconfig = false hiera_config = /etc/puppet/hiera.yaml localconfig = /var/lib/puppet/state/localconfig name = config rest_authconfig = /etc/puppet/auth.conf storeconfigs = true storeconfigs_backend = puppetdb tagmap = /etc/puppet/tagmail.conf thin_storeconfigs = false I checked the firewall rules on this VM; 80, 443, 8140, 3000 are allowed. Do I still have to tweak any specifics to auth.conf for getting this to work?

    Read the article

  • Can't login to just installed view administrator

    - by matarvai81
    Hi, we are starting to test View for our purposes. I have created new test enviroment, new vdidemo active directory, new virtual center etc... I just installed view connection server component to new server and trying to do initial configuration, but when trying to log in I get following error " Error accessing the View Administrator. Contact the system administrator" Log file says following error 08:14:08,925 INFO LoginBean User administrator has failed to authenticate to View Administrator What is causing this problem? How can I log in and start to test VDI?

    Read the article

  • Apache, Django with mod_wsgi, and large request buffering

    - by Mukul
    In my setup of Apache 2.2 MPM worker and Django 1.3 with mod_wsgi 2.8, I need to support large POST request payloads. The problem is that when there are many such simultaneous requests, Apache uses up all the memory in the system and then crashes. It seems that Apache is buffering the requests completely in memory before executing the WSGI handler and passing it the request. Is there any way to control request buffering in Apache? The log shows the following error whenever the crash happens: [Wed Jun 29 18:35:27 2011] [error] cgid daemon process died, restarting Here's my virtual host's configuration: <VirtualHost *:8080> ServerName example.com ErrorLog /var/log/apache2/error.log WSGIScriptAlias / <path to django.wsgi> WSGIPassAuthorization on WSGIDaemonProcess example.com WSGIProcessGroup example.com XSendFileAllowAbove on XSendFile on </VirtualHost>

    Read the article

  • Crash after plugging in the Logitech H600 wireless transmitter

    - by SneezyDinosaur
    I recently bought the Logitech H600 Wireless Headset. When I plug in the USB wireless transmitter, Ubuntu 12.04 LTS crashes. How does that come and what do you suggest me to do? Same problem here, as soon as the H600 headset is plugged in 12.04 crashes. Relevant snip from /var/log/Xorg.failsafe.log is below, complete log can be found as a gist [ 2676.496] (**) Logitech Logitech Wireless Headset: Applying InputClass "evdev keyboard catchall" [ 2676.496] (II) Using input driver 'evdev' for 'Logitech Logitech Wireless Headset' [ 2676.496] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 2676.496] (**) Logitech Logitech Wireless Headset: always reports core events [ 2676.496] (**) evdev: Logitech Logitech Wireless Headset: Device: "/dev/input/event16" [ 2676.496] (--) evdev: Logitech Logitech Wireless Headset: Vendor 0x46d Product 0xa29 [ 2676.496] (--) evdev: Logitech Logitech Wireless Headset: Found absolute axes [ 2676.496] (--) evdev: Logitech Logitech Wireless Headset: Found absolute multitouch axes [ 2676.496] (--) evdev: Logitech Logitech Wireless Headset: Found keys [ 2676.496] (II) evdev: Logitech Logitech Wireless Headset: Configuring as mouse [ 2676.496] (II) evdev: Logitech Logitech Wireless Headset: Configuring as keyboard [ 2676.496] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.2/2-1.2.2:1.3/input/input16/event16" [ 2676.496] (II) XINPUT: Adding extended input device "Logitech Logitech Wireless Headset" (type: KEYBOARD, id 10) [ 2676.496] (**) Option "xkb_rules" "evdev" [ 2676.496] (**) Option "xkb_model" "pc105" [ 2676.496] (**) Option "xkb_layout" "us" [ 2676.497] (II) evdev: Logitech Logitech Wireless Headset: initialized for absolute axes. [ 2676.497] Backtrace: [ 2676.497] 0: /usr/bin/X (xorg_backtrace+0x37) [0xb7698637] [ 2676.497] 1: /usr/bin/X (0xb7510000+0x18c3ba) [0xb769c3ba] [ 2676.497] 2: (vdso) (__kernel_rt_sigreturn+0x0) [0xb74ed40c] [ 2676.497] 3: /lib/i386-linux-gnu/libc.so.6 (0xb7155000+0x135d32) [0xb728ad32] [ 2676.497] 4: /usr/bin/X (XIChangeDeviceProperty+0x16c) [0xb7630b0c] [ 2676.497] 5: /usr/lib/xorg/modules/input/evdev_drv.so (0xb3f4a000+0x634e) [0xb3f5034e]

    Read the article

  • SATA errors reported during boot: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0

    - by digby280
    I have noticed some error during the Linux boot. They seem to continue to occur after the boot adding lines to the log every few seconds. Once booted this normally does not appear to be causing any problems. However, around 1 in 10 boots results in a kernel panic and the computer has on two or three occasions suddenly rebooted after being powered on for a number of hours. I presume the cause of the reboot is a kernel panic as well. I am running Ubuntu 11.10 and I have had Ubuntu installed on the computer for around a year. I have googled around and not found anything useful. I have provided the kernel log lines and the output of smartctl. Can anyone explain exactly what these errors mean, or better still how to resolve them? Apr 2 16:51:27 dell580 kernel: [ 19.831140] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 Apr 2 16:51:27 dell580 kernel: [ 19.934194] tg3 0000:03:00.0: eth0: Link is down Apr 2 16:51:28 dell580 kernel: [ 20.929468] tg3 0000:03:00.0: eth0: Link is up at 100 Mbps, full duplex Apr 2 16:51:28 dell580 kernel: [ 20.929471] tg3 0000:03:00.0: eth0: Flow control is on for TX and on for RX Apr 2 16:51:28 dell580 kernel: [ 20.929727] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Apr 2 16:51:29 dell580 kernel: [ 21.609381] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 Apr 2 16:51:29 dell580 kernel: [ 21.616515] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:29 dell580 kernel: [ 21.616519] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:29 dell580 kernel: [ 21.616525] ata2.00: hard resetting link Apr 2 16:51:29 dell580 kernel: [ 21.934036] ata2.01: hard resetting link Apr 2 16:51:29 dell580 kernel: [ 22.408890] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:29 dell580 kernel: [ 22.408907] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:29 dell580 kernel: [ 22.440934] ata2.00: configured for UDMA/100 Apr 2 16:51:29 dell580 kernel: [ 22.449040] ata2.01: configured for UDMA/133 Apr 2 16:51:29 dell580 kernel: [ 22.449818] ata2: EH complete Apr 2 16:51:33 dell580 kernel: [ 26.122664] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:33 dell580 kernel: [ 26.122670] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:33 dell580 kernel: [ 26.122677] ata2.00: hard resetting link Apr 2 16:51:33 dell580 kernel: [ 26.442684] ata2.01: hard resetting link Apr 2 16:51:34 dell580 kernel: [ 26.925545] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:34 dell580 kernel: [ 26.925561] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:34 dell580 kernel: [ 26.961542] ata2.00: configured for UDMA/100 Apr 2 16:51:34 dell580 kernel: [ 26.969616] ata2.01: configured for UDMA/133 Apr 2 16:51:34 dell580 kernel: [ 26.970400] ata2: EH complete Apr 2 16:51:35 dell580 kernel: [ 28.111180] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:35 dell580 kernel: [ 28.111184] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:35 dell580 kernel: [ 28.111191] ata2.00: hard resetting link Apr 2 16:51:35 dell580 kernel: [ 28.429674] ata2.01: hard resetting link Apr 2 16:51:36 dell580 kernel: [ 28.904557] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:36 dell580 kernel: [ 28.904572] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:36 dell580 kernel: [ 28.936609] ata2.00: configured for UDMA/100 Apr 2 16:51:36 dell580 kernel: [ 28.944692] ata2.01: configured for UDMA/133 Apr 2 16:51:36 dell580 kernel: [ 28.945464] ata2: EH complete Apr 2 16:51:38 dell580 kernel: [ 31.581756] eth0: no IPv6 routers present Apr 2 16:51:38 dell580 kernel: [ 32.103066] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:38 dell580 kernel: [ 32.103074] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:38 dell580 kernel: [ 32.103085] ata2.00: hard resetting link Apr 2 16:51:38 dell580 kernel: [ 32.419669] ata2.01: hard resetting link Apr 2 16:51:39 dell580 kernel: [ 32.894518] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:39 dell580 kernel: [ 32.894533] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:39 dell580 kernel: [ 32.926536] ata2.00: configured for UDMA/100 Apr 2 16:51:39 dell580 kernel: [ 32.934715] ata2.01: configured for UDMA/133 Apr 2 16:51:39 dell580 kernel: [ 32.935578] ata2: EH complete Here's the output of smartctl for the drive. smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.0.0-17-generic] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F1 DT Device Model: SAMSUNG HD103UJ Serial Number: S13PJ90QC19706 LU WWN Device Id: 5 0000f0 00b1c7960 Firmware Version: 1AA01113 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 3b Local Time is: Mon Apr 2 17:13:48 2012 BST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 41) The self-test routine was interrupted by the host with a hard or soft reset. Total time to complete Offline data collection: (11772) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 197) minutes. Conveyance self-test routine recommended polling time: ( 21) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 076 076 011 Pre-fail Always - 7940 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 521 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 642 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 482 13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always - 0 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 759 184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 073 069 000 Old_age Always - 27 (Min/Max 16/27) 194 Temperature_Celsius 0x0022 073 067 000 Old_age Always - 27 (Min/Max 16/28) 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 320028 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 099 099 000 Old_age Always - 1494 200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 253 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 211 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 211 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 0f 31 63 8f e1 Error: ICRC, ABRT 15 sectors at LBA = 0x018f6331 = 26174257 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 40 62 8f e1 08 00:01:00.460 READ DMA c8 00 20 00 7c 30 e0 08 00:01:00.450 READ DMA c8 00 00 10 49 8f e1 08 00:01:00.440 READ DMA c8 00 e0 20 d0 30 e0 08 00:01:00.420 READ DMA c8 00 00 c0 59 90 e1 08 00:01:00.400 READ DMA Error 210 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 cf e9 cf 66 e0 Error: ICRC, ABRT 207 sectors at LBA = 0x0066cfe9 = 6737897 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 b8 cf 66 e0 08 00:08:29.780 READ DMA c8 00 60 60 c9 18 e0 08 00:08:29.770 READ DMA c8 00 40 20 c9 18 e0 08 00:08:29.770 READ DMA c8 00 20 00 c9 18 e0 08 00:08:29.760 READ DMA c8 00 20 98 cf 66 e0 08 00:08:29.750 READ DMA Error 209 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 2f d1 74 e0 e0 Error: ICRC, ABRT 47 sectors at LBA = 0x00e074d1 = 14709969 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 00 74 e0 e0 08 00:00:30.940 READ DMA c8 00 20 18 36 de e0 08 00:00:30.930 READ DMA c8 00 08 48 f1 dd e0 08 00:00:30.930 READ DMA c8 00 08 a8 f0 dd e0 08 00:00:30.930 READ DMA c8 00 08 90 f0 dd e0 08 00:00:30.930 READ DMA Error 208 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 7f 21 88 9d e0 Error: ICRC, ABRT 127 sectors at LBA = 0x009d8821 = 10324001 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 a0 00 88 9d e0 08 00:00:27.610 READ DMA c8 00 58 a8 e7 9c e0 08 00:00:27.610 READ DMA c8 00 00 28 e6 9c e0 08 00:00:27.610 READ DMA c8 00 00 e0 e4 9c e0 08 00:00:27.610 READ DMA c8 00 00 90 e0 9c e0 08 00:00:27.600 READ DMA Error 207 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 26 6a 6a c3 e0 Error: ABRT at LBA = 0x00c36a6a = 12806762 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ca 00 00 90 69 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 90 68 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 50 65 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 d0 64 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 90 63 c3 e0 08 00:29:39.350 WRITE DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Interrupted (host reset) 90% 638 - # 2 Short offline Interrupted (host reset) 90% 638 - # 3 Extended offline Interrupted (host reset) 90% 638 - # 4 Short offline Interrupted (host reset) 90% 638 - # 5 Extended offline Interrupted (host reset) 90% 638 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

    Read the article

  • AutoHotkey cannot interact with Windows 8 Windows&hellip;or can it!

    - by deadlydog
    If you’ve installed Windows 8 and are trying to use AutoHotkey (AHK) to interact with some of the Winodws 8 Windows (such as the Control Panel for example), or with apps that need to be Ran As Administrator, then you’ve likely become very frustrated as I did to discover that AHK can not send any commands (keyboard or mouse input) to these windows.  This was a huge concern as I often need to run Visual Studio as an administrator and wanted my hotkeys and hotstrings to work in Visual Studio.  After a day of fighting I finally realized the answer (and it’s pretty obvious once you think about it).  If you want AHK to be able to interact with Windows 8 Windows or apps running as administrator, then you also need to have your AHK script Run As Administrator. If you are like me then you probably have your AHK scripts set to run automatically at login, which means you don’t have the opportunity to right-click on the script and manually tell it to Run As Administrator.  Luckily the work around is simple.  First, if you want to have your AHK script (or any program for that matter) run when you log in, create a shortcut to the application and place the shortcut in: C:\Users\[User Name]\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup Note that you will need to replace “[User Name]” with your username, and that “AppData” is a hidden folder so you’ll need to turn on viewing hidden folders to see it.  So by placing that shortcut there Windows will automatically run your script when you log on.  Now, to get it to run as an administrator by default, right-click on the shortcut and go to Properties.  Under the Shortcut tab, click on the “Advanced…” button and check off “Run as administrator”.  That’s it.  Now when you log onto Windows your script will automatically start up, running as an administrator; allowing it to interact with any application and window like you had expected it to in the first place.   Happy coding!

    Read the article

  • Awstats messaging non existant user causing exim4 to go nuts

    - by Chris
    I've taken over managing a server set up by someone else now uncontactable, while managing to work out most faults / changes needed this one is stumping me. Awstats is running on the machine and sending messages via exim4 to a user every time it runs an update. The user account has been deleted and so the exim4 main log files are filling up with message delivery errors, which firstly hinders meaningful log analysis for anything else and secondly uses up quite a lot of space (it grew to 22GB unattended, panic!) I've been through all the conf files in /etc/awstats and can't seem to find any mention of this user account. Google just turns up results about how to use awstats to parse exim4 log files. So the questions is where is this setting (on debian) likely to be? Cheers in advance

    Read the article

  • Laptop shuts down upon waking from suspend

    - by Bryan Head
    The computer enters suspend either by closing lid, choosing suspend from the top-right drop down, or hitting the power button and pressing suspend. It doesn't matter. I then attempt to wake the computer either by opening the lid (if it was closed) or hitting the power button. Again, doesn't matter. The computer will then immediately shutdown about 50% of the time. It seems to be more likely to shut down the longer it has been on suspend. I took a snapshot of /var/log/pm-suspend.log after a successfully resume and a shutdown. The only difference (outside of timestamps of course) was that a successful resume, after reporting the success of various suspend hooks, writes: Thu Jul 5 21:36:45 PDT 2012: performing suspend Thu Jul 5 21:37:10 PDT 2012: Awake. Thu Jul 5 21:37:10 PDT 2012: Running hooks for resume and then reports successful resume hooks. When it shuts down, the log ends at "performing suspend". I diffed the two files so I know this is the only difference. Thus, it looks like it's not even trying to wake up. Would love some ideas on this one. I've scoured the web but can't seem to find anyone else running into the same issue (it seems more common that the computer shuts down upon entering suspend, or only on hitting the power button to wake, and haven't seen any that are random like mine). I'll update with any requested information.

    Read the article

  • Since a few days, Dropbox stopped syncing

    - by Fabio
    Theres a new problem with nautilus-dropbox and is the worst for a service like Dropbox: stopped syncing and their tech support don't believe their users. The problem is: start dropbox it downloads index creates folders start to download files stop downloading files or the speed is like 0.3k/seg even deleting everything doesn't work, even syncing a single folder with a few files, not even configuring a different limit speed or let all your bandwith, nothing works for me and i have found many users with the same problem. it's strange, i have two computers with ubuntu 14.04 and one with windows 7, and in one of the linux machines it works fine, but not in the other one. Both of them are x64. The answers from the tech support starts with "delete everything and reinstall" to "you may be blocking port 443", yeah, sure (and if i do that half of internet dissapears, idiot), but nothing works. Someone has some idea? i cant find any log file (at least a text log file like in /var/log) to understand what is dropbox doing and what is not working. PS: sorry for my "english", is not my language Examples: dropbox slow on ubuntu 14.04 Dropbox does not sync on ubuntu 14.04 Dropbox Status (in spanish but is the same thing) fabio@canopus:~$ dropbox status Sincronizando (Quedan 330 archivos., Faltan 9 días.) Descargando 330 archivos... (0,3 KB/s, Faltan 9 días.) 9 days for 330 files / 100Mb

    Read the article

  • fail2ban with Cloudflare

    - by tatersalad58
    I'm using fail2ban to block web vulnerability scanners. It is working correctly when visiting the site if CloudFlare is bypassed, but a user can still access it if going through it. I have mod_cloudflare installed. Is it possible to block users with IPtables when using Cloudflare? Ubuntu Server 12.04 32-bit Access.log: 112.64.89.231 - - [29/Aug/2012:19:16:01 -0500] "GET /muieblackcat HTTP/1.1" 404 469 "-" "-" Jail.conf [apache-probe] enabled = true port = http,https filter = apache-probe logpath = /var/log/apache2/access.log action = iptables-multiport[name=apache-probe, port="http,https", protocol=tcp] maxretry = 1 bantime = 30 # Test Apache-probe.conf [Definition] failregex = ^<HOST>.*"GET \/muieblackcat HTTP\/1\.1".* ignoreregex =

    Read the article

  • How to add timestamp to the logfilename with the apache log4j

    - by swati
    Hello Everyone, I am new to using apache logger . I have downloaded the log4j-xx and i have the following text configuration file # Set root logger level to DEBUG and its only appender to mainFormat. log4j.rootLogger = TRACE, mainFormat, FILE # mainFormat is set to be a ConsoleAppender. log4j.appender.mainFormat=org.apache.log4j.ConsoleAppender # mainFormat uses PatternLayout. log4j.appender.mainFormat.layout=org.apache.log4j.PatternLayout log4j.appender.mainFormat.layout.ConversionPattern=%d [%t] %-5p %c - %m%n #File makes a file of the output. log4j.appender.FILE=org.apache.log4j.FileAppender log4j.appender.FILE.File=log4j_HAPR001_OutputFile.log log4j.appender.FILE.layout=org.apache.log4j.PatternLayout log4j.appender.FILE.layout.ConversionPattern=%d [%t] %-5p %c - %m%n i use the above config file to create the log file. Now i wanted to add the current time stamp to the log file. Is there any way to do this. If yes can some one please give me the instructions how to do. Thanks in advance. Regards, Swati

    Read the article

  • single for-loop runtime explanation problem

    - by owwyess
    I am analyzing some running times of different for-loops, and as I'm getting more knowledge, I'm curious to understand this problem which I have still yet to find out. I have this exercise called "How many stars are printed": for (int i = N; i > 1; i = i/2) System.out.println("*"); The answers to pick from is A: ~log N B: ~N C: ~N log N D: ~0.5N^2 So the answer should be A and I agree to that, but on the other side.. Let's say N = 500 what would Log N then be? It would be 2.7. So what if we say that N=500 on our exercise above? That would most definitely print more han 2.7 stars? How is that related? Because it makes sense to say that if the for-loop looked like this: for (int i = 0; i < N; i++) it would print N stars. I hope to find an explanation for this here, maybe I'm interpreting all these things wrong and thinking about it in a bad way. Thanks in advance.

    Read the article

  • Adobe Coldfusion Railo OpenBD Apache Tomcat Multiple Sites

    - by chris hough
    Here's what I am trying to do, unless I am crazy: I am trying to use Tomcat with the multiple workers, so far I got OpenBD working, but having trouble with Railo, and will be tackling Adobe after. each engine deployed as a war separated by different workers I wanted to keep both the sites and engines inside my sites directory I have to remap the symlink for the WEB-INF when I switch engines = have not found a way around this my thought is to have everything separated into modules and I want to be able to execute both cfm and php code in a single site.  Ideally, it would be amazing if there would be a way to not have to remap the symlink as well. thoughts? can this be done? I am trying to mimic how this would be setup on a live server, not using eclipse for example. here is what I am working with so far: my apache workers.properties worker.list=openbd, openbdadmin, railo, railoadmin  worker.openbd.type=ajp13  worker.openbd.host=local.mydev.openbd  worker.openbd.port=8009 worker.openbdadmin.type=ajp13  worker.openbdadmin.host=local.admin.openbd worker.openbdadmin.port=8009   worker.railo.type=ajp13  worker.railo.host=local.mydev.railo  worker.railo.port=8009 worker.railoadmin.type=ajp13  worker.railoadmin.host=local.admin.railo worker.railoadmin.port=8009   my tomcat servers.xml < Host name="local.admin.openbd" appBase="/Users/[myusername]/Websites/coldfusion.engines"  unpackWARs="false" autoDeploy="true" xmlValidation="true" xmlNamespaceAware="false"        < Context path="" docBase="openbd/" reloadable="true" privileged="true" antiResourceLocking="false" anitJARLocking="false" allowLinking="true" < /Host        < Host name="local.admin.railo"   appBase="/Users/[my username]/Websites/coldfusion.engines" unpackWARs="false" autoDeploy="true" xmlValidation="true" xmlNamespaceAware="false"        < Context path="" docBase="railo/"  reloadable="true" privileged="true" antiResourceLocking="false" anitJARLocking="false" allowLinking="true" < /Host < Host name="local.mydev.openbd"   appBase="/Users/[my username]/Websites/coldfusion.engines" unpackWARs="false" autoDeploy="true" xmlValidation="true" xmlNamespaceAware="false" < Context path="" docBase="/Users/[my username]/Websites/example.mydev/wwwroot/"  reloadable="true" privileged="true" antiResourceLocking="false" anitJARLocking="false" allowLinking="true"< /Context < /Host < Host name="local.mydev.railo"   appBase="/Users/[my username]/Websites/coldfusion.engines"  unpackWARs="false" autoDeploy="true" xmlValidation="true" xmlNamespaceAware="false" < Context path="" docBase="/Users/[my username]/Websites/example.mydev/wwwroot/"  reloadable="true" privileged="true" antiResourceLocking="false" anitJARLocking="false" allowLinking="true" < /Host my apache vhosts ServerName local.admin.openbd DocumentRoot /Users/[my username]/Websites/coldfusion.engines/openBD/ #Mount OpenBD and tell it to only server cfml files JkMount /*.cfm openbdadmin ErrorLog "/Users/[my username]/Websites/apache.logs/local_openbdadmin_error.log" ServerName local.admin.railo DocumentRoot /Users/[my username]/Websites/coldfusion.engines/railo/ #Mount Railo and tell it to only server cfml files JkMount /*.cfm railoadmin ErrorLog "/Users/[my username]/Websites/apache.logs/local_railoadmin_error.log" ServerName local.mydev DocumentRoot /Users/[my username]/Websites/example.mydev/wwwroot ErrorLog "/Users/[my username]/Websites/apache.logs/local_example_mydev_error.log" ServerName local.mydev.openbd DocumentRoot /Users/[my username]/Websites/example.mydev/wwwroot #Mount OpenBD and tell it to only server cfml files JkMount /*.cfm openbd ErrorLog "/Users/[my username]/Websites/apache.logs/local_example_mydev_openbd_error.log" ServerName local.mydev.railo DocumentRoot /Users/[my username]/Websites/example.mydev/wwwroot JkMount /*.cfm railo ErrorLog "/Users/[my username]/Websites/apache.logs/local_example_mydev_railo_error.log" my folder structure I am using websites/apache.logs/ websites/coldfusion.engines/ websites/coldfusion.engines/cfusion/ websites/coldfusion.engines/openBD/ websites/coldfusion.engines/railo/ websites/example.mydev/ websites/example.mydev/wwwroot/ websites/example.mydev/wwwroot/index.cfm   websites/example.mydev/wwwroot/index.htm   websites/example.mydev/wwwroot/index.php   error log output [Thu Aug 27 00:54:50.443 2009] [11279:2686719776] [info] init_jk::mod_jk.c (3183): mod_jk/1.2.28 initialized [Thu Aug 27 00:54:51.346 2009] [11280:2686719776] [info] init_jk::mod_jk.c (3183): mod_jk/1.2.28 initialized [Thu Aug 27 00:55:18.963 2009] [11284:2686719776] [info] jk_open_socket::jk_connect.c (594): connect to 127.0.0.1:8009 failed (errno=61) [Thu Aug 27 00:55:18.963 2009] [11284:2686719776] [info] ajp_connect_to_endpoint::jk_ajp_common.c (922): Failed opening socket to (127.0.0.1:8009) (errno=61) [Thu Aug 27 00:55:18.963 2009] [11284:2686719776] [error] ajp_send_request::jk_ajp_common.c (1507): (openbdadmin) connecting to backend failed. Tomcat is probably not started or is listening on the wrong port (errno=61) [Thu Aug 27 00:55:18.963 2009] [11284:2686719776] [info] ajp_service::jk_ajp_common.c (2447): (openbdadmin) sending request to tomcat failed (recoverable), because of error during request sending (attempt=1) [Thu Aug 27 00:55:19.063 2009] [11284:2686719776] [info] jk_open_socket::jk_connect.c (594): connect to 127.0.0.1:8009 failed (errno=61) [Thu Aug 27 00:55:19.063 2009] [11284:2686719776] [info] ajp_connect_to_endpoint::jk_ajp_common.c (922): Failed opening socket to (127.0.0.1:8009) (errno=61) [Thu Aug 27 00:55:19.063 2009] [11284:2686719776] [error] ajp_send_request::jk_ajp_common.c (1507): (openbdadmin) connecting to backend failed. Tomcat is probably not started or is listening on the wrong port (errno=61) [Thu Aug 27 00:55:19.063 2009] [11284:2686719776] [info] ajp_service::jk_ajp_common.c (2447): (openbdadmin) sending request to tomcat failed (recoverable), because of error during request sending (attempt=2) [Thu Aug 27 00:55:19.063 2009] [11284:2686719776] [error] ajp_service::jk_ajp_common.c (2466): (openbdadmin) connecting to tomcat failed. [Thu Aug 27 00:55:19.063 2009] [11284:2686719776] [info] jk_handler::mod_jk.c (2615): Service error=-3 for worker=openbdadmin [Thu Aug 27 00:55:20.377 2009] [11283:2686719776] [info] jk_open_socket::jk_connect.c (594): connect to 127.0.0.1:8009 failed (errno=61) [Thu Aug 27 00:55:20.377 2009] [11283:2686719776] [info] ajp_connect_to_endpoint::jk_ajp_common.c (922): Failed opening socket to (127.0.0.1:8009) (errno=61) [Thu Aug 27 00:55:20.377 2009] [11283:2686719776] [error] ajp_send_request::jk_ajp_common.c (1507): (railoadmin) connecting to backend failed. Tomcat is probably not started or is listening on the wrong port (errno=61) [Thu Aug 27 00:55:20.377 2009] [11283:2686719776] [info] ajp_service::jk_ajp_common.c (2447): (railoadmin) sending request to tomcat failed (recoverable), because of error during request sending (attempt=1) [Thu Aug 27 00:55:20.477 2009] [11283:2686719776] [info] jk_open_socket::jk_connect.c (594): connect to 127.0.0.1:8009 failed (errno=61) [Thu Aug 27 00:55:20.477 2009] [11283:2686719776] [info] ajp_connect_to_endpoint::jk_ajp_common.c (922): Failed opening socket to (127.0.0.1:8009) (errno=61) [Thu Aug 27 00:55:20.477 2009] [11283:2686719776] [error] ajp_send_request::jk_ajp_common.c (1507): (railoadmin) connecting to backend failed. Tomcat is probably not started or is listening on the wrong port (errno=61) [Thu Aug 27 00:55:20.477 2009] [11283:2686719776] [info] ajp_service::jk_ajp_common.c (2447): (railoadmin) sending request to tomcat failed (recoverable), because of error during request sending (attempt=2) [Thu Aug 27 00:55:20.477 2009] [11283:2686719776] [error] ajp_service::jk_ajp_common.c (2466): (railoadmin) connecting to tomcat failed. [Thu Aug 27 00:55:20.477 2009] [11283:2686719776] [info] jk_handler::mod_jk.c (2615): Service error=-3 for worker=railoadmin

    Read the article

  • Start a screen through svcadm with Solaris 11

    - by Sephreph
    I am running into a problem when trying to start a detached screen through a Solaris 11 service. This service controls nginx. When I reboot the system, the screen doesn't start, but if I issue svcadm disable nginx then svcadm enable nginx manually, it does. The rest of the init script functions correctly on a reboot (the nginx daemon starts, etc). The part of the service that triggers the screen looks like this: case "$1" in start) echo "Starting Nginx Logger: \c" /usr/bin/screen -S nginxLogger -d -m /opt/php-5.3.10/bin/php $loggingProg LogRetVal=$? [ $LogRetVal -eq 0 ] & echo "ok" || echo "failed" .... The log (/var/svc/log/network-nginx\:default.log) shows that $LogRetVal is returning 0, and $loggingProg is just pointing to a PHP script. If it matters, when I manually restart the service, I'm logged in as root. I'm unsure how to check if it's a permission issue (I'm new to Solaris, I've recently switched from CentOS/RHEL).

    Read the article

  • Site Isn't Enabled When Apache Restarted and No Error Message

    - by curiouscat
    I have added a new sites-available file but the site isn't enabled when apache is restarted. All the existing sites continue to work fine. There is no error message in /var/log/apache2/error.log There is the message, in the error log showing that I shut down the server and restarted: caught SIGTERM, shutting down There is nothing fancy about the site. The only special thing is the name is: domain_name.tv I can't imagine why that would matter, but at this point I can't imagine why the site isn't enabled or at least an error message given. Server running Ubuntu 12.04.

    Read the article

  • Linking RSA with Logstash etc

    - by Anuj
    i was wondering whether we can use logstash or any other opn source or free Log management too to collect,index the data and then feed this index into RSA envision or any other enterprise SIEM tool. Will this be beneficial in any way? Also are the indexes of various Log Management and SIEM tools -- splunk,RSA envision,HP Arcsight Logger and Logstash etc compatiable with each other. My organization is planning to buy RSA envision appliance and is there any way to restrict or select only certian type of log files eg: security logs or apache logs .. so that onlt those are monitored and this will reduce the EPS(events per second).

    Read the article

  • GNU screen configuration for optimal keycode recognition

    - by intuited
    Currently GNU screen will botch up certain keystrokes, for example CTRL pressed in combination with the arrow keys, so that eg when in vim insert mode, CTRL-PGUp will Uppercase the next/current word (or something like that). I'd like for it to work pretty much transparently, so that the functionality is the same as when it's not running (with the obvious exception of CTRL-a control sequences)... is this possible? Also — and I suspect this is more or less a separate issue — I'd like for the scrollwheel to scroll back in the session log rather than cycling through the history as it does now. Doable? Or perhaps it could be set to emulate a much larger screen size that the terminal app that it's running under could keep that text in its session log. either way the goal would be to be able to use the mouse wheel and/or shift-up-arrow to scroll back in the session log.

    Read the article

< Previous Page | 216 217 218 219 220 221 222 223 224 225 226 227  | Next Page >