Search Results

Search found 26517 results on 1061 pages for 'large directory'.

Page 220/1061 | < Previous Page | 216 217 218 219 220 221 222 223 224 225 226 227  | Next Page >

  • smb mount cannot sync file automatically

    - by Frank
    Under Ubuntu, I use smb to mount the directory of the server(Ubuntu too), and set to a local directory, like /home/username/server. When I change some files of local directory, the files in the server change too. However, when I change some files of the server, the files in local directory don't change. Does someone know what the reason is ? And could someone fix it and make local changes updated to the server so that I could edit local and make in the server?

    Read the article

  • Apache2 return 404 for proxy requests before reaching WSGI

    - by Alejandro Mezcua
    I have a Django app running under Apache2 and mod_wsgi and, unfortunately, lots of requests trying to use the server as a proxy. The server is responding OK with 404 errors but the errors are generated by the Django (WSGI) app, which causes a high CPU usage. If I turn off the app and let Apache handle the response directly (send a 404), the CPU usage drops to almost 0 (mod_proxy is not enabled). Is there a way to configure Apache to respond directly to this kind of requests with an error before the request hits the WSGI app? I have seen that maybe mod_security would be an option, but I'd like to know if I can do it without it. EDIT. I'll explain it a bit more. In the logs I have lots of connections trying to use the server as a web proxy (e.g. connections like GET http://zzz.zzz/ HTTP/1.1 where zzz.zzz is an external domain, not mine). This requests are passed on to mod_wsgi which then return a 404 (as per my Django app). If I disable the app, as mod_proxy is disabled, Apache returns the error directly. What I'd finally like to do is prevent Apache from passing the request to the WSGI for invalid domains, that is, if the request is a proxy request, directly return the error and not execute the WSGI app. EDIT2. Here is the apache2 config, using VirtualHosts files in sites-enabled (i have removed email addresses and changed IPs to xxx, change the server alias to sample.sample.xxx). What I'd like is for Apache to reject any request that doesn't go to sample.sample.xxx with and error, that is, accept only relative requests to the server or fully qualified only to the actual ServerAlias. default: <VirtualHost *:80> ServerAdmin [email protected] ServerName X.X.X.X ServerAlias X.X.X.X DocumentRoot /var/www/default <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options FollowSymLinks AllowOverride None Order allow,deny allow from all </Directory> ErrorDocument 404 "404" ErrorDocument 403 "403" ErrorDocument 500 "500" ErrorLog ${APACHE_LOG_DIR}/error.log LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost> actual host: <VirtualHost *:80> ErrorDocument 404 "404" ErrorDocument 403 "403" ErrorDocument 500 "500" WSGIScriptAlias / /var/www/sample.sample.xxx/django.wsgi ServerAdmin [email protected] ServerAlias sample.sample.xxx ServerName sample.sample.xxx CustomLog /var/www/sample.sample.xxx/log/sample.sample.xxx-access.log combined Alias /robots.txt /var/www/sample.sample.xxx/static/robots.txt Alias /favicon.ico /var/www/sample.sample.xxx/static/favicon.ico AliasMatch ^/([^/]*\.css) /var/www/sample.sample.xxx/static/$1 Alias /static/ /var/www/sample.sample.xxx/static/ Alias /media/ /var/www/sample.sample.xxx/media/ <Directory /var/www/sample.sample.xxx/static/> Order deny,allow Allow from all </Directory> <Directory /var/www/sample.sample.xxx/media/> Order deny,allow Allow from all </Directory> </VirtualHost>

    Read the article

  • rdiff-backup command to restore

    - by Hulk
    Let say i have a source directory which contains The contents /foo/a /foo/b(These are the files in a directory on a remote system) using rdiff command i make a backup as rdiff-backup [email protected]::/foo backups And a,b are now present in my backups directory.And then i delete file a from the remote system and again i do a sync so my local directory has the file b only. My question is that how do i restore file a if the deletion and sync is done on the same day Thanks..

    Read the article

  • Linux user authentication with Microsoft LDAP

    - by TusharG
    I'm trying to do following things: Login to CentOS over ssh: authentication needs to happen with Microsoft Ldap On successful login create a home directory for user in /home if directory exists take him to his home directory Put quota on /home/user directory of 5 GB Can someone please show me a link for Centos/redhat to authorize users with Microsoft Ldap? I have already tried: setup command from root - "Authentication configuration" - "[] User Information - Use Ldap" - Authentication - [] Use Ldap Authentication" - []/[*] Use TLS - Server: ldap://corporate.company.com - Base DN: dc=corporate,dc=company,dc=com" This does not authentication users with Microsoft LDAP

    Read the article

  • Port forwarding not working properly

    - by sudo work
    I'm trying to host a small web server from my home network; however, I have not been able to successfully port forward ports to the local server. My current network topology looks like this: Cable Modem/Router - Secondary Wireless Router - Many computers (including server) The modem/router I'm using is a Cisco (Scientific Atlantic) DPC2100, provided by my ISP. The wireless router that I'm using as the central hub to my home network is a Linksys E3000. The computer being used as a server is running Ubuntu 10.04 Server Edition. The main issue is that I can't access the server remotely, using my WAN IP address. I have port forwarded my wireless router; however, I believe that I need to somehow set my modem to bridge mode. As far as I can tell though, this isn't possible. Here are the various IP address settings: DPC2100 WAN: 69.xxx.xxx.xxx Internal IP: 192.168.100.1 Internal Network: 192.168.7.0 E3000 IP Address: 192.168.7.2 Gateway: 192.168.7.1 Internal IP: 192.168.1.1 Internal Network: 192.168.1.0 Server IP Address: 192.168.1.123 Gateway: 192.168.1.1 Now I can do an nmap at various nodes, and here are the results (from the server): nmap localhost: 22,25,53,80,110,139,143,445,631,993,995,3306,5432,8080 open nmap 192.168.7.2: 22,25,80 (filtered),110,139,445 open (ports I have forwarded in the E3000)* nmap 69.xxx.xxx.xxx: 1720 open *For some reason, I can SSH into the server at 192.168.7.2, but not view the website. Here are also some other settings: /etc/hosts/ 127.0.0.1 localhost 127.0.1.1 servername ::1 localhost ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters /etc/apache2/sites-available/default snippet <VirtualHost *:80> DocumentRoot /srv/www/ <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> ... </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> ... </Directory> ErrorLog /var/log/apache2/error.log LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> ... </Directory> </VirtualHost> Let me know if you need any other information; some stuff probably slipped my mind.

    Read the article

  • Django | Apache | Deploy website behind SSL

    - by planet260
    So here are my requirements. I have a website built in Django. I deployed it on Apache Ubuntu. Before there was no SSL involved so the deployment was pretty simple. But now the requirements are changed. Now I have to take a few actions like signup and login behind SSL and present the admin panel and other normally via HTTP. By following the this tutorial I have set-up Apache and SSL and generated certificates for SSL communication. But I am not sure how to proceed, ie. how to serve only a few of my actions through SSL. Below is my configuration. The normal actions are working fine but I don't know how to configure SSL calls. WSGIScriptAlias / /home/ubuntu/myproject/src/myproject/wsgi.py WSGIPythonPath /home/ubuntu/myproject/src <VirtualHost *:80> ServerName mydomain.com <Directory /home/ubuntu/myproject/src/myproject> <Files wsgi.py> order deny,allow Allow from all </Files> </Directory> Alias /static/admin/ "/home/ubuntu/myproject/src/static/admin/" <Directory "/home/ubuntu/myproject/src/static/admin/"> Order allow,deny Options Indexes Allow from all IndexOptions FancyIndexing </Directory> <Location "/login"> RewriteEngine on RewriteRule /admin(.*)$ https://mydomain.com/login$1 [L,R=301] </Location> </VirtualHost> <VirtualHost *:443> ServerName mydomain.com SSLEngine on SSLOptions +StrictRequire SSLCertificateFile /etc/apache2/ssl/apache.crt SSLCertificateKeyFile /etc/apache2/ssl/apache.key <Directory /home/ubuntu/myproject/src/myproject> <Files wsgi.py> order deny,allow Allow from all </Files> </Directory> Alias /static/admin/ "/home/ubuntu/myproject/src/static/admin/" <Directory "/home/ubuntu/myproject/src/static/admin/"> Order allow,deny Options Indexes Allow from all IndexOptions FancyIndexing </Directory> </VirtualHost> Can you please help me out on how to achieve this? What am I doing wrong? I have read a lot of tutorials but honestly I am not really good at configurations. Any help is appreciated.

    Read the article

  • Apache httpd permissions

    - by DD.
    I have created a directory /xyz/www With the following permissions: -rw-r--r--. 1 myuser developers I edited my http.conf: DocumentRoot "/xyz/www/" <Directory "/xyz/www/"> Options Indexes FollowSymLinks AllowOverride None Order allow,deny Allow from all </Directory> I get 403 error: You don't have permission to access / on this server. Looking in the logs: (13)Permission denied: Can't open directory for index: /xyz/www/ I've tried recursively adding 777 permissions but still have the same issue.

    Read the article

  • Linux missing disk space

    - by cpt.Buggy
    I have KVM vps with strange disk usage: # df -h Filesystem Size Used Avail Use% Mounted on /dev/sdb 493G 1.2G 466G 1% / tmpfs 4.0G 0 4.0G 0% /dev/shm /dev/sda1 96M 41M 51M 45% /boot # du -sh / du: cannot access `/proc/1633/task/1633/fd/4': No such file or directory du: cannot access `/proc/1633/task/1633/fdinfo/4': No such file or directory du: cannot access `/proc/1633/fd/4': No such file or directory du: cannot access `/proc/1633/fdinfo/4': No such file or directory 1021M / How could it be? Where are ~20G of free space?

    Read the article

  • Getting 403 on apache with php on fedora 17

    - by Js Lim
    I put the projects on ~/public_html/project and create a soft-link in /var/www/html/project which point to ~/public_html/project. my /etc/httpd/conf/httpd.conf is shown below ServerRoot "/etc/httpd" PidFile run/httpd.pid Timeout 60 KeepAlive Off MaxKeepAliveRequests 100 KeepAliveTimeout 5 <IfModule prefork.c> StartServers 8 MinSpareServers 5 MaxSpareServers 20 ServerLimit 256 MaxClients 256 MaxRequestsPerChild 4000 </IfModule> <IfModule worker.c> StartServers 4 MaxClients 300 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> Listen 80 Include conf.d/*.conf User apache Group apache ServerAdmin root@localhost UseCanonicalName Off DocumentRoot "/var/www/html" <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory "/var/www/html"> Options Indexes FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> # Allow SVN access from public <Directory "/var/www/svn"> Options Indexes FollowSymLinks AllowOverride None Order allow,deny Allow from all </Directory> <IfModule mod_userdir.c> UserDir disabled # UserDir public_html </IfModule> DirectoryIndex index.html index.html.var AccessFileName .htaccess <FilesMatch "^\.ht"> Order allow,deny Deny from all Satisfy All </FilesMatch> TypesConfig /etc/mime.types DefaultType text/plain <IfModule mod_mime_magic.c> # MIMEMagicFile /usr/share/magic.mime MIMEMagicFile conf/magic </IfModule> HostnameLookups Off <IfModule mod_dav_fs.c> # Location of the WebDAV lock database. DAVLockDB /var/lib/dav/lockdb </IfModule> ScriptAlias /cgi-bin/ "/var/www/cgi-bin/" <Directory "/var/www/cgi-bin"> AllowOverride None Options None Order allow,deny Allow from all </Directory> in /var/log/httpd/error_log [error] [client 127.0.0.1] Symbolic link not allowed or link target not accessible: /var/www/html/project [error] [client 127.0.0.1] File does not exist: /var/www/html/favicon.ico in browser Forbidden You don't have permission to access /project on this server. I get this error. ls -l result: drwxrwxrwx 3 js js 4.0K Nov 1 14:43 public_html/ for project drwxr-xr-x. 6 js js 4.0K Nov 1 16:38 public_html/project/ I cannot figure out the problem.

    Read the article

  • Sharing directories in Windows 7

    - by CoryR
    I've created a directory named "Shared" in my "My Documents" directory (C:\Users\Cory.MYDOMAIN\Documents\Shared). I right clicked on the Shared folder and publicly shared this one directory. At least that's what wanted to do. In reality, Windows 7 shared the entire C:\Users directory. How can I share this one subdirectory without granting access to the rest of the C:\Users tree?

    Read the article

  • QNetworkAccessManager timeout.

    - by Umesha MS
    Hi, Presently I am working on an application which sends and receives file from remote server. To do network operation I am using QNetworkAccessManager. To upload a file I am using QNetworkAccessManager::put() and to download I am using QNetworkAccessManager::get() functions. While uploading a file I will initialize a timer with time out of 15 sec. if I upload a small file it will complete it within the time out period. But if I try to upload a file which is very large in size get time out. So how to decide time out for uploading of large file. Same in case of downloading of a large file. I get file in chunk by chunk in readyread() signal. Here also if I download a large file I get time out. So how to decide time out for uploading of large file.

    Read the article

  • How to give INSTALLDIR folder permission in WIX?

    - by tete
    I am designing a WIX 3.6 installer project, during the installation we need to grand the user create file permission to the install folder(INSTALLDIR, especially with the default install folder, the Program Files, the user normally can't create file in the installation. We've experienced some failures). I guess it can be achieved by setting a Permission element, with CreateFile property. However, the INSTALLDIR is a directory, and only such elements as CreateFolder, File, FileShare, Registry, ServiceInstall can have permission element. So could anyone tell me how to do that? My directory declaration is something like this: <Directory Id="TARGETDIR" Name="SourceDir"> <Directory Id="ProgramFiles64Folder"> <Directory Id='MANUFACTUREFOLDER' Name='$(var.ManufacturerName)'> <Directory Id="INSTALLDIR" Name="$(var.ProductName)"> Thanks!

    Read the article

  • nested if: too many arguments?

    - by FLX
    For some reason this code creates problems: source="/foo/bar/" destination="/home/oni/" if [ -d $source ]; then echo "Source directory exists" if [ -d $destination ]; then echo "Destination directory exists" rsync -raz --delete --ignore-existing --ignore-times --size-only --stats --progress $source $destination chmod -R 0755 $destination else echo "Destination directory does not exists" fi else echo "Source directory does not exists" fi It errors out with: Source directory exists /usr/bin/copyfoo: line 7: [: too many arguments Destination directory does not exists I used nested if statements in bash before without a problem, what simple mistake am I overlooking? Thanks!

    Read the article

  • How to create nested directories in PhoneGap

    - by Stallman
    I have tried on this, but this didn't satisfy my request at all. I write a new one: var file_system; var fs_root; window.requestFileSystem(LocalFileSystem.PERSISTENT, 1024*1024, onInitFs, request_FS_fail); function onInitFs(fs) { file_system= fs; fs_root= file_system.root; alert("ini fs"); create_Directory(); alert("ini fs done."); } var string_array; var main_dir= "story_repository/"+ User_Editime; string_array= new Array("story_repository/",main_dir, main_dir+"/rec", main_dir+"/img","story_repository/"+ User_Name ); function create_Directory(){ var start= 0; var path=""; while(start < string_array.length) { path = string_array[start]; alert(start+" th created directory " +" is "+ path); fs_root.getDirectory ( path , {create: true, exclusive: false}, function(entry) { alert(path +"is created."); }, create_dir_err() ); start++; }//while loop }//create_Directory function create_dir_err() { alert("Recursively create directories error."); } function request_FS_fail() { alert("Failed to request File System "); } Although the directories are created, the it sends me ErrorCallback:"alert("Recursively create directories error.");" Firstly, I don't think this code will work since I have tried on this: This one failed: window.requestFileSystem( LocalFileSystem.PERSISTENT, 0, //request file system success callback. function(fileSys) { fileSys.root.getDirectory( "story_repository/"+ dir_name, {create: true, exclusive: false}, //Create directory story_repository/Stallman_time. function(directory) { alert("Create directory: "+ "story_repository/"+ dir_name); //create dir_name/img/ fileSys.root.getDirectory { "story_repository/"+ dir_name + "/img/", {create: true, exclusive: false}, function(directory) { alert("Create a directory: "+ "story_repository/"+ dir_name + "/img/"); //check. //create dir_name/rec/ fileSys.root.getDirectory { "story_repository/"+ dir_name + "/rec/", {create: true, exclusive: false}, function(directory) { alert("Create a directory: "+ "story_repository/"+ dir_name + "/rec/"); //check. //Go ahead. }, createError } //create dir_name/rec/ }, createError } //create dir_name/img }, createError); }, //Create directory story_repository/Stallman_time. createError()); } I just repeatedly call fs.root.getDirectory only but it failed. But the first one is almost the same... 1. What is the problem at all? Why does the first one always gives me the ErrorCallback? 2. Why can't the second one work? 3. Does anyone has a better solution?(no ErrorcallBack msg) ps: I work on Android and PhoneGap 1.7.0.

    Read the article

  • Using htaccess rewrite to make a subdirectory be its own root for root relative path requests

    - by Scott
    Can I use htaccess to capture requests from a certain subdirectory and make that directory use itself as the root directory for any root relative path requests? For example if I have... http://www.example.com/subFIXED/subANY/restofpath ...where subFIXED is always the same directory, subANY is any immediate subdirectory of subFIXED, and I want a redirection of all href/src requests from any file under subANY to use subANY as the 'root' (sort of like a subdomain), in effect having root level requests use this as the root directory level: http://www.example.com/subFIXED/subANY/ Instead of this: http://www.example.com/ I'm assuming I can put an htaccess file in subFIXED to handle all calls coming from anything under any subANY, but not being very familiar with htaccess rewriting, variables, etc., I can't figure out how to capture which subANY directory is making the root level request and then use that capture to make a rewrite to consider that directory the root level of any root relative path requests from it. Thanks for your help

    Read the article

  • Excluding directories in Exuberant CTags

    - by DeepYellow
    I'm working with a very large code base and I find it useful to be selective about which directories are included for use with Exuberant Ctags. The --exclude option works well to eliminate individual file and directory names (with globing wildcards), but I can't figure out how to get it to exclude path patterns containing more than one directory. For example, I may want to exclude a directory tests, but only when processing thirdparty\tests (under Windows). The problem is if I just use --exclude=tests I exclude too many directories, including a test directory in the code I'm actively working on. Here are some things I've tried: --exclude=thirdparty\tests --exclude=thirdparty\\tests --exclude=*\thirdparty\tests --exclude=*\\thirdparty\\tests --exclude=thirdparty/tests Ctags silently ignores all these as evidenced by an examination of the tags file. How can I exclude a directory only when it is preceded by a given parent directory?

    Read the article

  • Set NTFS Permissions with DirectorySecurity after created Active Dirctory Groups c#

    - by maverick
    Hi I am a little confused about setting NTFS Permissions to a directory after I created Active Directory Groups (both programmatically). When I created the Active Directory Objects then I have to wait a few seconds to set the NTFS Permissions. If I have not this timeout then I get sometimes an error message that the identify (active directory groupname) could not found. Is it possible that the DirectorySecurity-Class from DirectoryInfo-Class has an different algorithm to get the idenfity from active directory objects? Because when I checking the existing of the groups in active directory with System.DirectoryServices all the objects exist suddenly after creation. Kind regards

    Read the article

  • How can I use SVN to manage my Firefox Extension project?

    - by 4AM
    I'm using SVN to manage my Firefox extension project, and this project contains an XPCOM component. Firefox is loading directly from my working directory by placing a text file with the working directory's path in the ./extensions directory of my user profile. When Firefox starts, my extension fails to load & overlay; examining the Error Console, I see that the error states that ".svn cannot be loaded as a component" - a reference to the .svn directory inside my "components" directory of the plug-in structure. Is there any way to get Firefox to ignore this directory, or get SVN to generate a working copy without the .svn directories in it?

    Read the article

  • How can I possibly sort this in JavaScript?

    - by orokusaki
    I've been pounding my head on the wall trying to figure out how to sort this in JavaScript (I have to work with it in this format unfortunately). I need to sort it based on Small, Medium, Large, XL, XXL (Small ranking the highest) in each variationValues size field. The problem is that I need to sort the variationCosts and variationInventories at the same time to match the new order (since each value in order corresponds to the values in the other fields :( Input I have to work with var m = { variationNames: ["Length", "Size" ], variationValues: [ ["26.5\"", "XXL"], ["25\"", "Large"], ["25\"", "Medium"], ["25\"", "Small"], ["25\"", "XL"], ["25\"", "XXL"], ["26.5\"", "Large"], ["26.5\"", "Small"], ["26.5\"", "XL"] ], variationCosts: [ 20.00, 20.00, 20.00, 20.00, 20.00, 20.00, 20.00, 20.00, 20.00 ], variationInventories: [ 10, 60, 51, 10, 15, 10, 60, 10, 15 ], parentCost: 20.00 }; Desired output var m = { variationNames: ["Length", "Size" ], variationValues: [ ["25\"", "Small"], ["26.5\"", "Small"], ["25\"", "Medium"], ["25\"", "Large"], ["26.5\"", "Large"], ["25\"", "XL"], ["26.5\"", "XL"] ["25\"", "XXL"], ["26.5\"", "XXL"], ], variationCosts: [ 20.00, 20.00, 20.00, 20.00, 20.00, 20.00, 20.00, 20.00, 20.00 ], variationInventories: [ 10, 10, 51, 60, 15, 15, 15, 10, 10 ], parentCost: 20.00 };

    Read the article

  • Tweaking Hudson memory usage

    - by rovarghe
    Hudson 3.1 has some performance optimizations that greatly reduces its memory footprint. Prior to this Hudson used to always hold the entire data model (all jobs and all builds) in memory which affected scalability. Some installations configured heap sizes in excess of 1GB to counteract this. Hudson 3.1.x maintains an MRU cache and only loads jobs and builds as they are required. Because of the inability to change existing APIs and be backward compatible with plugins, there were limits to how far we could go with this approach. Memory optimizations almost always come with a related cost, in this case its additional I/O that has to be performed to load data on request. On a small site that has frequent traffic, this is usually not noticeable since the MRU cache will usually hold on to all the data. A large site with infrequent traffic might experience some delays when the first request hits the server after a long gap. If you have a large heap and are able to allocate more memory, the cache settings can be adjusted to take advantage of this and even go back to pre-3.1 behavior. All the cache settings can be passed as options to the JVM container (Tomcat or the default Jetty container) using the -D option. There are two caches, independant of each other, one for Jobs and the other for Builds. For the jobs cache: hudson.jobs.cache.evict_in_seconds ( default=60 ) Seconds from last access (could be because of a servlet request or a background cron thread) a job should be purged from the cache. Set this to 0 to never purge based on time. hudson.jobs.cache.initial_capacity ( default=1024 ) Initial number of jobs the cache can accomodate. Setting this to the number of jobs you typically display on your Hudson landing page or home page will speed up consecutive access to that page. If the default is too large you may consider downsizing and using that memory for the Builds cache instead. hudson.jobs.cache.max_entries ( default=1024) Maximum number of jobs in the cache. The default is large enough for most installations, but if you find I/O activity when always accessing the hudson home page you might consider increasing this, but first verify if the I/O is caused by frequent eviction (see above), rather than by the cache not being large enough. For the builds cache: The builds cache is used to store Build objects as they are read from storage. Typically this happens when a user drills down into the details of a particular Job from the hudson hom epage. The cache is shared among builds for different jobs since in most installations all jobs are not accessed with the same frequency, so a per-job builds cache would be a waste of memory. hudson.job.builds.cache.evict_in_seconds ( default=60 ) Same as the equivalent Job cache, applied to Build. hudson.job.builds.cache.initial_capacity" ( default=512 ) Same as equivalent Job cache setting. Note the smaller initial size. If your site stores a large number of builds and has frequent access to more builds you might consider bumping this up. hudson.job.builds.cache.max_entries ( default=10240 ) The default max is large enough for most installations, the builds cache has bigger sized objects, so be careful about increasing the upper limit on this. See section on monitoring below. Sample usage: java -jar hudson-war-3.1.2-SNAPSHOT.war -Dhudson.jobs.cache.evict_in_seconds=300 \ -Dhudson.job.builds.cache.evict_in_seconds=300 Monitoring cache usage The 'jmap' tool that comes with the JDK can be used to monitor cache performance in an indirect way by looking at the number of Job and Build objects in each cache. Find the PID of the hudson instance and run $ jmap -histo:live <pid | grep 'hudson.model.*Lazy.*Key$' Here's a sample output: num #instances #bytes class name 523: 28 896 hudson.model.RunMap$LazyRunValue$Key 1200: 3 96 hudson.model.LazyTopLevelItem$Key These are the keys to the Jobs (LazyTopLevelItem$Key) and Builds (RunMap$LazyRunValue$Key) in the caches, so counting the number of keys is a good indicator of the number of items in the cache at any given moment. The size in bytes can be ignored, they are just the size of the keys, not the actual sizes of the objects they hold. Those sizes can only be obtained with a profiler. With the output above we can conclude that there are 3 jobs and 28 builds in memory. The 28 builds can all be from 1 job or all 3 jobs. Over time on an idle system, these should get evicted and memory cache should be empty. In practice, because of background cron threads and triggers, jobs rarely fall down to zero. Access of a job or a build by a cron thread resets the eviction timer.

    Read the article

  • After removing Ubuntu Builder there is still folder in home directory. Why? How to remove it?

    - by user132989
    I removed Ubuntu Builder using Synaptic with option Mark for Complete Removal. I thought that gonna delete folder (made by Ubuntu Builder) in home dir, but it's not. AFAIK Mark for Complete Removal is same as Purging, and that should delete all files made by program. Am I wrong? Is it safe to delete it with sudo rm -r /home/ubuntu-builder because it is in home dir? And last question. Why is it made folder in /home instead in ~/ dir?

    Read the article

  • Why your Netapp is so slow...

    - by Darius Zanganeh
    Have you ever wondered why your Netapp FAS box is slow and doesn't perform well at large block workloads?  In this blog entry I will give you a little bit of information that will probably help you understand why it’s so slow, why you shouldn't use it for applications that read and write in large blocks like 64k, 128k, 256k ++ etc..  Of course since I work for Oracle at this time, I will show you why the ZS3 storage boxes are excellent choices for these types of workloads. Netapp’s Fundamental Problem The fundamental problem you have running these workloads on Netapp is the backend block size of their WAFL file system.  Every application block on a Netapp FAS ends up in a 4k chunk on a disk. Reference:  Netapp TR-3001 Whitepaper Netapp has proven this lacking large block performance fact in at least two different ways. They have NEVER posted an SPC-2 Benchmark yet they have posted SPC-1 and SPECSFS, both recently. In 2011 they purchased Engenio to try and fill this GAP in their portfolio. Block Size Matters So why does block size matter anyways?  Many applications use large block chunks of data especially in the Big Data movement.  Some examples are SAS Business Analytics, Microsoft SQL, Hadoop HDFS is even 64MB! Now let me boil this down for you.  If an application such MS SQL is writing data in a 64k chunk then before Netapp actually writes it on disk it will have to split it into 16 different 4k writes and 16 different disk IOPS.  When the application later goes to read that 64k chunk the Netapp will have to again do 16 different disk IOPS.  In comparison the ZS3 Storage Appliance can write in variable block sizes ranging from 512b to 1MB.  So if you put the same MSSQL database on a ZS3 you can set the specific LUNs for this database to 64k and then when you do an application read/write it requires only a single disk IO.  That is 16x faster!  But, back to the problem with your Netapp, you will VERY quickly run out of disk IO and hit a wall.  Now all arrays will have some fancy pre fetch algorithm and some nice cache and maybe even flash based cache such as a PAM card in your Netapp but with large block workloads you will usually blow through the cache and still need significant disk IO.  Also because these datasets are usually very large and usually not dedupable they are usually not good candidates for an all flash system.  You can do some simple math in excel and very quickly you will see why it matters.  Here are a couple of READ examples using SAS and MSSQL.  Assume these are the READ IOPS the application needs even after all the fancy cache and algorithms.   Here is an example with 128k blocks.  Notice the numbers of drives on the Netapp! Here is an example with 64k blocks You can easily see that the Oracle ZS3 can do dramatically more work with dramatically less drives.  This doesn't even take into account that the ONTAP system will likely run out of CPU way before you get to these drive numbers so you be buying many more controllers.  So with all that said, lets look at the ZS3 and why you should consider it for any workload your running on Netapp today.  ZS3 World Record Price/Performance in the SPC-2 benchmark ZS3-2 is #1 in Price Performance $12.08ZS3-2 is #3 in Overall Performance 16,212 MBPS Note: The number one overall spot in the world is held by an AFA 33,477 MBPS but at a Price Performance of $29.79.  A customer could purchase 2 x ZS3-2 systems in the benchmark with relatively the same performance and walk away with $600,000 in their pocket.

    Read the article

  • proftpd, dynamic IP, and filezilla: port troubles

    - by Yami
    The basic setup: Two computers, one running proftpd, one attempting to connect via filezilla. Both linux (xubuntu on the server, kubuntu on the client). Both are at the moment behind a router on a residential (read: dynamic IP) connection; the client is a laptop I plan to take away from the home network, so I'll need this to work externally. I have my router set up to allow specific ports forwarded to each machine and, where possible, have plugged in those numbers into proftpd (via gadmin, double-checking the config file) and filezilla. Attempting to connect via active mode using the internal IP works: Status: Connecting to 192.168.1.139:8085... Status: Connection established, waiting for welcome message... Response: 220 Crossroads FTP Command: USER <redacted> Response: 331 Password required for <redacted> Command: PASS ******* Response: 230 Anonymous access granted, restrictions apply Command: OPTS UTF8 ON Response: 200 UTF8 set to on Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is the current directory Command: TYPE I Response: 200 Type set to I Command: PORT 192,168,1,52,153,140 Response: 200 PORT command successful Command: LIST Response: 150 Opening ASCII mode data connection for file list Response: 226 Transfer complete Status: Directory listing successful Attempting to connect via the domain name, however, leads to issues; in active mode, the PORT is the last command to be received according to the server's logs, and in passive mode, it's the PASV command. This leads me to believe I'm being redirected to a bad port? Active Sample: Status: Resolving address of <url> Status: Connecting to <ip:port> Status: Connection established, waiting for welcome message... Response: 220 Crossroads FTP Command: USER <redacted> Response: 331 Password required for <redacted> Command: PASS ******* Response: 230 Anonymous access granted, restrictions apply Command: OPTS UTF8 ON Response: 200 UTF8 set to on Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is the current directory Command: TYPE I Response: 200 Type set to I Command: PORT 174,111,127,27,153,139 Response: 200 PORT command successful Command: LIST Error: Connection timed out Error: Failed to retrieve directory listing Passive sample: Status: Resolving address of ftp.bonsaiwebdesigns.com Status: Connecting to 174.111.127.27:8085... Status: Connection established, waiting for welcome message... Response: 220 Crossroads FTP Command: USER yamikuronue Response: 331 Password required for yamikuronue Command: PASS ******* Response: 230 Anonymous access granted, restrictions apply Command: OPTS UTF8 ON Response: 200 UTF8 set to on Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is the current directory Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (64,95,64,197,101,88). Command: LIST Error: Connection timed out Error: Failed to retrieve directory listing In both cases, the log file ends at "PORT" or "PASV" - there's no record of ever receiving a "LIST" command. Just above that I can see the attempt to connect actively via the internal IP, which does indeed include a LIST command. My config file includes "PassivePorts 20001-26999", which are the port forwards I set up for the ftp server, and "Port 8085", which is also forwarded to the same machine. I also have a MasqueradeAddress set up to prevent it from reporting its internal IP, which was an earlier issue I had. I think what I'm asking is, is there another setting someplace I have to change to get this setup to work?

    Read the article

  • Deploying play! 2.0 application on an apache server with a reverse proxy

    - by locrizak
    I'm trying to deploy my play! 2.0 application on an Ubuntu 11.10 server and I have been running into error after error and hope someone can help me here. I am try to deploy my Play! application using a reverse proxy on Apache 2. I have enabled the apache proxy modules and configured the proxy.conf file in mods_enabled. The vhost for my domain looks like this: <Directory /var/www/stage.domain.com AllowOverride None Order Deny,Allow Deny from all </Directory <VirtualHost *:80 DocumentRoot /var/www/stage.domain.com/web ServerName stage.domain.com ServerAdmin [email protected] # ProxyRequests Off # ProxyPreserveHost On <Proxy * Order allow,deny Allow from all </Proxy # ProxyVia On # ProxyPass /play/ http://localhost:9000/ # ProxyPassReverse /play/ http://localhost:9000/ ErrorLog /var/log/ispconfig/httpd/stage.domain.com/error.log ErrorDocument 400 /error/400.html ErrorDocument 401 /error/401.html ErrorDocument 403 /error/403.html ErrorDocument 404 /error/404.html ErrorDocument 405 /error/405.html ErrorDocument 500 /error/500.html ErrorDocument 502 /error/502.html ErrorDocument 503 /error/503.html <IfModule mod_ssl.c </IfModule <Directory /var/www/stage.domain.com/web Options FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory <Directory /var/www/clients/client2/web7/web Options FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory # Clear PHP settings of this website <FilesMatch "\.ph(p3?|tml)$" SetHandler None </FilesMatch # mod_php enabled AddType application/x-httpd-php .php .php3 .php4 .php5 php_admin_value sendmail_path "/usr/sbin/sendmail -t -i [email protected]" php_admin_value upload_tmp_dir /var/www/clients/client2/web7/tmp php_admin_value session.save_path /var/www/clients/client2/web7/tmp # PHPIniDir /var/www/conf/web7 php_admin_value open_basedir /var/www/clients/client2/web7/:/var/www/clients/client2/web7/web:/va$ # add support for apache mpm_itk <IfModule mpm_itk_module AssignUserId web7 client2 </IfModule <IfModule mod_dav_fs.c # Do not execute PHP files in webdav directory <Directory /var/www/clients/client2/web7/webdav <FilesMatch "\.ph(p3?|tml)$" SetHandler None </FilesMatch </Directory # DO NOT REMOVE THE COMMENTS! # IF YOU REMOVE THEM, WEBDAV WILL NOT WORK ANYMORE! # WEBDAV BEGIN # WEBDAV END </IfModule # <Location /play/ # ProxyPass http://localhost:9000/ # SetEnv force-proxy-request-1.0 1 # SetEnv proxy-nokeepalive 1 # </Location ProxyRequests Off ProxyPass /play/ http://localhost:9000/ ProxyPassReverse /play/ localhost:9000/ ProxyPass /play http://localhost:9000/ ProxyPassReverse /play http://localhost:9000/ # SetEnv force-proxy-request-1.0 1 # SetEnv proxy-nokeepalive 1 </VirtualHost This vhost file was generated by ispconfig and I have not touched anything that was there before just added onto. As you can see by the commented out parts I have tried a lot of different things based on random tutorials I have found but all of them have ended up in Internal Server Error, 503 and most often a '502 Bad Gateway`. I can start play and it does connect successfully to my database. I can get a page to show up when there is an error and the play! stack trace error pages comes up but where everything is fine I get one of the errors above. My application.conf file looks like this: db info ....... application.mode=PROD logger.root=ERROR # Logger used by the framework: logger.play=INFO # Logger provided to your application: logger.application=DEBUG http.path="/play/" XForwardedSupport="127.0.0.1" And my hosts file looks like this (I have never changed or added anything to the host file): 127.0.0.1 localhost 127.0.1.1 matrix # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters Any insights onto what I might be doing wrong or if theres anything I can try please let me know! Thanks!! Edit Again the reverse proxy will work (I checked with sending to to google.com). Its when there is a successful connection to Netty. It's like Netty refuses the connection to the page. Edit 2 output from apachectl -S _default_:8081 127.0.0.1 (/etc/apache2/sites-enabled/000-apps.vhost:10) *:8090 is a NameVirtualHost default server 127.0.0.1 (/etc/apache2/sites-enabled/000-ispconfig.vhost:10) port 8090 namevhost 127.0.0.1 (/etc/apache2/sites-enabled/000-ispconfig.vhost:10) *:80 is a NameVirtualHost default server 127.0.0.1 (/etc/apache2/sites-enabled/000-default:1) port 80 namevhost 127.0.0.1 (/etc/apache2/sites-enabled/000-default:1) port 80 namevhost domain.com (/etc/apache2/sites-enabled/100-domain.com.vhost:7) port 80 namevhost domain.com (/etc/apache2/sites-enabled/100-domain.com.vhost:7) port 80 namevhost domain.com (/etc/apache2/sites-enabled/100-domain.com.vhost:7) port 80 namevhost domain.com (/etc/apache2/sites-enabled/100-domain.com.vhost:7) port 80 namevhost domain.com (/etc/apache2/sites-enabled/100-domain.com.vhost:7) port 80 namevhost stage.domain.com (/etc/apache2/sites-enabled/100-stage.domain.com.vhost:7) port 80 namevhost domain.com (/etc/apache2/sites-enabled/100-domain.com.vhost:7)

    Read the article

  • c# Unable to open file for reading

    - by Maks
    I'm writing a program that uses FileSystemWatcher to monitor changes to a given directory, and when it recieves OnCreated or OnChanged event, it copies those created/changed files to a specified directorie(s). At first I had problems with the fact that OnChanged/OnCreated events can be sent twice (not acceptable in case it needed to process 500MB file) but I made a way around this and with what I'm REALLY STUCKED with is getting the following IOException: The process cannot access the file 'C:\Where are Photos\bookmarks (11).html' because it is being used by another process. Thus, preventing the program from copying all the files it should. So as I mentioned, when user uses this program he/she specifes monitored directory, when user copies/creates/changes file in that directory, program should get OnCreated/OnChanged event and then copy that file to few other directories. Above error happens in all casess, if user copies few files that needs to owerwrite other ones in folder being monitored or when copying bulk of several files or even sometimes when copying one file in a monitored directory. Whole program is quite big so I'm sending the most important parts. OnCreated: private void OnCreated(object source, FileSystemEventArgs e) { AddLogEntry(e.FullPath, "created", ""); // Update last access data if it's file so the same file doesn't // get processed twice because of sending another event. if (fileType(e.FullPath) == 2) { lastPath = e.FullPath; lastTime = DateTime.Now; } // serves no purpose now, it will be remove soon string fileName = GetFileName(e.FullPath); // copies file from source to few other directories Copy(e.FullPath, fileName); Console.WriteLine("OnCreated: " + e.FullPath); } OnChanged: private void OnChanged(object source, FileSystemEventArgs e) { // is it directory if (fileType(e.FullPath) == 1) return; // don't mind directory changes itself // Only if enough time has passed or if it's some other file // because two events can be generated int timeDiff = ((TimeSpan)(DateTime.Now - lastTime)).Seconds; if ((timeDiff < minSecsDiff) && (e.FullPath.Equals(lastPath))) { Console.WriteLine("-- skipped -- {0}, timediff: {1}", e.FullPath, timeDiff); return; } // Update last access data for above to work lastPath = e.FullPath; lastTime = DateTime.Now; // Only if size is changed, the rest will handle other handlers if (e.ChangeType == WatcherChangeTypes.Changed) { AddLogEntry(e.FullPath, "changed", ""); string fileName = GetFileName(e.FullPath); Copy(e.FullPath, fileName); Console.WriteLine("OnChanged: " + e.FullPath); } } fileType: private int fileType(string path) { if (Directory.Exists(path)) return 1; // directory else if (File.Exists(path)) return 2; // file else return 0; } Copy: private void Copy(string srcPath, string fileName) { foreach (string dstDirectoy in paths) { string eventType = "copied"; string error = "noerror"; string path = ""; string dirPortion = ""; // in case directory needs to be made if (srcPath.Length > fsw.Path.Length) { path = srcPath.Substring(fsw.Path.Length, srcPath.Length - fsw.Path.Length); int pos = path.LastIndexOf('\\'); if (pos != -1) dirPortion = path.Substring(0, pos); } if (fileType(srcPath) == 1) { try { Directory.CreateDirectory(dstDirectoy + path); //Directory.CreateDirectory(dstDirectoy + fileName); eventType = "created"; } catch (IOException e) { eventType = "error"; error = e.Message; } } else { try { if (!overwriteFile && File.Exists(dstDirectoy + path)) continue; // create new dir anyway even if it exists just to be sure Directory.CreateDirectory(dstDirectoy + dirPortion); // copy file from where event occured to all specified directories using (FileStream fsin = new FileStream(srcPath, FileMode.Open, FileAccess.Read, FileShare.Read)) { using (FileStream fsout = new FileStream(dstDirectoy + path, FileMode.Create, FileAccess.Write)) { byte[] buffer = new byte[32768]; int bytesRead = -1; while ((bytesRead = fsin.Read(buffer, 0, buffer.Length)) > 0) fsout.Write(buffer, 0, bytesRead); } } } catch (Exception e) { if ((e is IOException) && (overwriteFile == false)) { eventType = "skipped"; } else { eventType = "error"; error = e.Message; // attempt to find and kill the process locking the file. // failed, miserably System.Diagnostics.Process tool = new System.Diagnostics.Process(); tool.StartInfo.FileName = "handle.exe"; tool.StartInfo.Arguments = "\"" + srcPath + "\""; tool.StartInfo.UseShellExecute = false; tool.StartInfo.RedirectStandardOutput = true; tool.Start(); tool.WaitForExit(); string outputTool = tool.StandardOutput.ReadToEnd(); string matchPattern = @"(?<=\s+pid:\s+)\b(\d+)\b(?=\s+)"; foreach (Match match in Regex.Matches(outputTool, matchPattern)) { System.Diagnostics.Process.GetProcessById(int.Parse(match.Value)).Kill(); } Console.WriteLine("ERROR: {0}: [ {1} ]", e.Message, srcPath); } } } AddLogEntry(dstDirectoy + path, eventType, error); } } I checked everywhere in my program and whenever I use some file I use it in using block so even writing event to log (class for what I ommited since there is probably too much code already in post) wont lock the file, that is it shouldn't since all operations are using using statement block. I simply have no clue who's locking the file if not my program "copy" process from user through Windows or something else. Right now I have two possible "solutions" (I can't say they are clean solutions since they are hacks and as such not desireable). Since probably the problem is with fileType method (what else could lock the file?) I tried changing it to this, to simulate "blocking-until-ready-to-open" operation: fileType: private int fileType(string path) { FileStream fs = null; int ret = 0; bool run = true; if (Directory.Exists(path)) ret = 1; else { while (run) { try { fs = new FileStream(path, FileMode.Open); ret = 2; run = false; } catch (IOException) { } finally { if (fs != null) { fs.Close(); fs.Dispose(); } } } } return ret; } This is working as much as I could tell (test), but... it's hack, not to mention other deficients. The other "solution" I could try (I didn't test it yet) is using GC.Collect() somewhere at the end of fileType() method. Maybe even worse "solution" than previous one. Can someone pleas tell me, what on earth is locking the file, preventing it from opening and how can I fix that? What am I missing to see? Thanks in advance.

    Read the article

< Previous Page | 216 217 218 219 220 221 222 223 224 225 226 227  | Next Page >