Search Results

Search found 8828 results on 354 pages for 'the pc samurai'.

Page 221/354 | < Previous Page | 217 218 219 220 221 222 223 224 225 226 227 228  | Next Page >

• Short USB cables not charging?

  - by tropolite

  I find this a strange problem but I can't find anything online about it. Recently I purchased a few short USB cables (20-30cm), to use in my car's USB connector to charge my phone. Strangely an older longer USB cable (1.2m), charges the phone fine (and the icon changes to show charging). With any of the short cables in the same USB slot no charging happens. Both the long and the short cables are USB2 compatible. I naturally assumed the short cables were faulty but connecting them to a PC or connecting to a high capacity external battery charging is successful using all the short cables and longer cables. Hopefully someone here is able to give me an explanation of the problem and how I can overcome this and use a short cable where it is most appropriate. Thanks

  Read the article

• Thinkpad CPU temperature reaches 100°C after 10 minutes of heavy use

  - by Nicolas Raoul

  Less than two years ago, I bought a Lenovo Thinkpad R500. When using the CPU heavily, it sometimes decides to reboot. I am using Linux, and a widget shows me the CPU temperature. The PC usually reboots when the temperature of the first core gets over 100°C Since I switched from Ubuntu 2010.10 32bit to Ubuntu 2011.04 64bit, it crashes much more often. I survive using these techniques: When in the office, I use a laptopcooler. When outside, I underclock to 800 MHz, by doing so it does not get too warm. QUESTION: Is it normal that a Thinkpad crashes if the CPU is at 100% for more than 10 minutes? How can I use the full power of my computer, for instance when showing CPU-hungry business intelligence tools to clients? The computer does not really feel that hot. Maybe the sensor itself is reporting wrong temperatures? Can I tell the BIOS to ignore it?

  Read the article

• Asus P6X58D & 12GB of RAM

  - by Hunter

  I just assembled my new PC and it screams, BUT it's only recognizing 8GB of ram in BIOS and OS rather than the installed 12GB. In the BIOS the RAM was registering at 1066 so I set it to 1600MHz. I update the BIOS to the latest non-beta release. http://www.asus.com/product.aspx?P_ID=wurRaDZ8lo4Ckukj OS = Windows 7 Ultimate 64-bit Mobo = Asus P6X58D Premium CPU = Intel Core i7 920 RAM = CORSAIR XMS3 12GB (6 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 HDD = Intel 80GB SSD SATA II PS = Kingwin 1000W Modular I've installed the Beta BIOS 0808 but no luck!

  Read the article

• Smartcards for storing gpg/ssh keys (Linux) - what do I need?

  - by Ninefingers

  Hi All, I'm interested in storing my SSH keys and gpg keys on a smartcard for added security. However, I'm a bit uncertain on a few points, which are as follows: How many keys can I get on a card? I assume both SSH and GPG can store keys on the card. Is there a limit to key size? I see a lot of cards saying they support 2048-bit keys, what about larger sizes? Hardware: can anyone recommend a card/reader combination that works well? I've done a fair amount of research and it seems PC/SC readers can be a bit iffy - is this your experience? Have I missed anything I should be asking? Are there any other hurdles? I'm aware fsf europe give away cards with membership - I'm not sure I want to join, but... are these cards any good?

  Read the article

• Xperia handset - cannot send files using bluetooth

  - by Sandeepan Nath

  My friend has a Sony Ericsson Xperia (most probably X8) handset which is an Android based smartphone. He is not able to send files through bluetooth but able to receive. I don't exactly remember the version of Android which he is currently having. He has tried to download and install the required update using the same phone (he has internet connected) from http://www.sonyericsson.com but not able to install it. So, he asked me to help him. Which version of Android do you think he has? Does it seem like he does not have Android 2.1 installed. It is written here (click on Xperia X8) that If your phone already has Android 2.1, you can use your mobile network* or a WiFi connection to download the software. Is it possible that he does not have updated Android and so not able to download? If so, does he need to upgrade to Android 2.1 first? Should it be done by connecting it to a PC?

  Read the article

• Is the motherboard the cause of these errors?

  - by ianfuture

  Motherboard is : ASUS A7N8X-E Deluxe, Rev1.01, On start up get: "cmos checksum error - defaults loaded" error BIOS is reset everytime and can't boot to Windows off HDD. POST report is ok once I tell it there is no Floppy drive attached and not to seek it. The boot sequence starts then just as get to load windows safe mode options whole PC shuts down. BIOS is reset to defaults again. I've checked the battery and jumpers. Tried a known working battery. Changed Graphics card, changed memory, changed HD to one without an OS. Disconnected DVD drive. PSU is known to be ok. IN BIOS CPU is recognised correctly and memory is also recognised ok. So is it likely to be a bad motherboard or corrupted BIOS or something else? Thanks :)

  Read the article

• Creative software leftovers - ASIO error message

  - by Tony Patriarche

  I temporarily installed an old Creative Audigy 2 soundboard on my Vista x64 Home Premium computer. Bad idea! I uninstalled the board & all software visible on the control panel. Now, with one particular app. (Sibelius) I keep getting a start-up message "CTASIO Warning: Creative ASIO: there are no Creative audio products installed on the system that support ASIO". I offer this as a candidate for "Most useless message", but that's beside the point. I used a commercial registry cleaner (PC-Tools Registry Mechanic) and then edited the registry looking for "creative", "audigy" and "ASIO". After removing everything I could find, I still get the message. Any suggestions?

  Read the article

• USB to HDMI using just a cable

  - by Nirmal

  I got a cable which has a USB point on one side and an HDMI point on the other side. I was under an impression that I could watch movies from my computer if I connect my computer to the TV using this cable. But looks like I was wrong. Does anyone know if such cable need some driver to make it work? Thanks for any input. (My computer is a Dell All-in-one PC which cannot take an extra graphic card. That's why I am trying my luck with such a cable.)

  Read the article

• Is proprietary vendor software required to use a wireless printer?

  - by sajee

  On Windows Vista, other than the driver, one can use a regular printer w/o any extra software, either plugged in via USB or over the network. I don't have to install extra software from the printer vendor to use the basic printer functionality. Is the same true for wireless printers? I need to install the HP 6000 wireless printer, and I hate installing vendor software other than the required drivers. So I'm wondering whether I need to install HP software on every PC that wants to use this printer? I haven't had a chance to read the manual but I'm hoping I don't have to. Can folks that have experience with wireless printers comment on whether vendor software, other than the printer driver, is required to use a wireless printer?

  Read the article

• squid3 auth thru samba using ntlm to AD doesn't work

  - by derty

  some users here are spending to much time exploring the WWW. So big boss whats to get this under control. We use a squid3 just for some security reason and chace benefits. and now i'm trying to set up a new proxy on a different server (Debian 6) Permissions are defined in AC and the squid3 should get the auth thru samba/winbind by using the ntlm protocol. but i'll get all the time Access, denited. it only works by using LDAP but thats not the way i need it. here some log and confs squid access.log 1326878095.784 1 192.168.15.27 TCP_DENIED/407 4049 GET http://at.msn.com/? -NONE/- text/html 1326878095.791 1 192.168.15.27 TCP_DENIED/407 4294 GET http://at.msn.com/? - NONE/- text/html 1326878095.803 9 192.168.15.27 TCP_DENIED/403 4028 GET http://at.msn.com/? kavan NONE/- text/html 1326878095.848 0 192.168.15.27 TCP_DENIED/403 3881 GET http://www.squid-cache.org/Artwork/SN.png kavan NONE/- text/html 1326878100.279 0 192.168.15.27 TCP_DENIED/403 3735 GET http://www.google.at/ kavan NONE/- text/html 1326878100.296 0 192.168.15.27 TCP_DENIED/403 3870 GET http://www.squid-cache.org/Artwork/SN.png kavan NONE/- text/html 1326878155.700 0 192.168.15.27 TCP_DENIED/407 4072 GET http://ie9cvlist.ie.microsoft.com/IE9CompatViewList.xml - NONE/- text/html 1326878155.705 2 192.168.15.27 TCP_DENIED/407 4317 GET http://ie9cvlist.ie.microsoft.com/IE9CompatViewList.xml - NONE/- text/html 1326878155.709 3 192.168.15.27 TCP_DENIED/403 4026 GET http://ie9cvlist.ie.microsoft.com/IE9CompatViewList.xml kavan NONE/- text/html squid chace 2012/01/18 10:12:49| Creating Swap Directories 2012/01/18 10:12:49| Starting Squid Cache version 3.1.6 for x86_64-pc-linux-gnu... 2012/01/18 10:12:49| Process ID 17236 2012/01/18 10:12:49| With 65535 file descriptors available 2012/01/18 10:12:49| Initializing IP Cache... 2012/01/18 10:12:49| DNS Socket created at [::], FD 7 2012/01/18 10:12:49| DNS Socket created at 0.0.0.0, FD 8 2012/01/18 10:12:49| Adding nameserver 192.168.15.2 from /etc/resolv.conf 2012/01/18 10:12:49| Adding nameserver 192.168.15.19 from /etc/resolv.conf 2012/01/18 10:12:49| Adding nameserver 192.168.15.1 from /etc/resolv.conf 2012/01/18 10:12:49| Adding domain schoenbrunn.local from /etc/resolv.conf 2012/01/18 10:12:49| helperOpenServers: Starting 5/5 'squid_ldap_auth' processes 2012/01/18 10:12:49| helperOpenServers: Starting 10/10 'ntlm_auth' processes 2012/01/18 10:12:49| helperOpenServers: Starting 10/10 'squid_kerb_auth' processes 2012/01/18 10:12:49| squid_kerb_auth: INFO: Starting version 1.0.5 2012/01/18 10:12:49| squid_kerb_auth: INFO: Starting version 1.0.5 2012/01/18 10:12:49| squid_kerb_auth: INFO: Starting version 1.0.5 2012/01/18 10:12:49| squid_kerb_auth: INFO: Starting version 1.0.5 2012/01/18 10:12:49| squid_kerb_auth: INFO: Starting version 1.0.5 2012/01/18 10:12:49| squid_kerb_auth: INFO: Starting version 1.0.5 2012/01/18 10:12:49| squid_kerb_auth: INFO: Starting version 1.0.5 2012/01/18 10:12:49| squid_kerb_auth: INFO: Starting version 1.0.5 2012/01/18 10:12:49| helperOpenServers: Starting 5/5 'squid_ldap_group' processes 2012/01/18 10:12:49| squid_kerb_auth: INFO: Starting version 1.0.5 2012/01/18 10:12:49| squid_kerb_auth: INFO: Starting version 1.0.5 2012/01/18 10:12:49| Unlinkd pipe opened on FD 73 2012/01/18 10:12:49| Local cache digest enabled; rebuild/rewrite every 3600/3600 sec 2012/01/18 10:12:49| Store logging disabled 2012/01/18 10:12:49| Swap maxSize 0 + 262144 KB, estimated 20164 objects 2012/01/18 10:12:49| Target number of buckets: 1008 2012/01/18 10:12:49| Using 8192 Store buckets 2012/01/18 10:12:49| Max Mem size: 262144 KB 2012/01/18 10:12:49| Max Swap size: 0 KB 2012/01/18 10:12:49| Using Least Load store dir selection 2012/01/18 10:12:49| Set Current Directory to /var/spool/squid3 2012/01/18 10:12:49| Loaded Icons. 2012/01/18 10:12:49| Accepting HTTP connections at [::]:3128, FD 74. 2012/01/18 10:12:49| HTCP Disabled. 2012/01/18 10:12:49| Squid modules loaded: 0 2012/01/18 10:12:49| Adaptation support is off. 2012/01/18 10:12:49| Ready to serve requests. 2012/01/18 10:12:50| storeLateRelease: released 0 objects smb.conf # Domain Authntication Settings workgroup = <WORKGROUP> security = ads password server = <DOMAINNAME>.LOCAL realm = <DOMAINNAME>.LOCAL ldap ssl = no # logging log level = 5 max log size = 50 # logs split per machine log file = /var/log/samba/%m.log # max 50KB per log file, then rotate ; max log size = 50 # User settings username map = /etc/samba/smbusers idmap uid = 10000-20000000 idmap gid = 10000-20000000 idmap backend = ad ; template primary group = <ad group> template shell = /sbin/nologin # Winbind Settings winbind separator = + winbind enum users = Yes winbind enum groups = Yes winbind netsted groups = Yes winbind nested groups = Yes winbind cache time = 10 winbind use default domain = Yes #Other Globals unix charset = LOCALE server string = <SERVERNAME> load printers = no printing = cups cups options = raw ; printcap name = /etc/printcap #obtain list of printers automatically on SystemV ; printcap name = lpstat ; printing = cups squid.conf auth_param ntlm program /usr/bin/ntlm_auth --require-membership-of=<DOMAINNAME>\\INTERNETZ --helper-protocol=squid-2.5-ntlmssp auth_param ntlm children 10 auth_param basic program /usr/lib/squid3/squid_ldap_auth -R -b "dc=<dcname>,dc=local" -D "cn=administrator,cn=Users,dc=<domainname>,dc=local" -w "******" -f sAMAccountName=%s -h 192.168.15.19:3268 auth_param basic realm "Proxy Authentifizierung. Bitte geben Sie Ihren Benutzername und Ihr Passwort ein!" #means insert you PW in an other language - # external_acl_type InetGroup %LOGIN /usr/lib/squid3/squid_ldap_group -R -b "dc=<domainname>,dc=local" -D "cn=administrator,cn=Users,dc=<domainname>,dc=local" -w "******" -f "(&(objectclass=person)(sAMAccountName=%v) (memberof=cn=%a,cn=internetz,dc=<domainname>,dc=local))" -h 192.168.15.19:3268 auth_param negotiate program /usr/lib/squid3/squid_kerb_auth -d auth_param negotiate children 10 auth_param negotiate keep_alive on acl localnet proxy_auth REQUIRED acl InetAccess external InetGroup Internetz http_access allow InetAccess http_access deny all acl auth proxy_auth REQUIRED http_access allow auth and a very suspicious is that by adding the proxy server to the Domain i see 2 new entries in the PC one with the original computer-name leopoldine and one with leopoldine CNF:f8efa4c4-ff0e-4217-939d-f1523b43464d ?!? I tried a lot, really... but i stuck on this problem... i actually i even reinstalled all dependent programs and reconfigured them from default. Group exists and has me in it. Firefox running on the old proxy and i use IE for testing the new one. But i'll get all the time Access-Denited and to be honest i'm quite a beginner, so please don't be to prude. I'll interested in improving, i'll get the information we need to fix this but i started working 2 month ago and got only 1 1/2 year's training and not a single sec. in linux ;)

  Read the article

• Is anyone else using OpenBSD as a router in the enterprise? What hardware are you running it on?

  - by Kamil Kisiel

  We have an OpenBSD router at each of our locations, currently running on generic "homebrew" PC hardware in a 4U server case. Due to reliability concerns and space considerations we're looking at upgrading them to some proper server-grade hardware with support etc. These boxes serve as the routers, gateways, and firewalls at each site. At this point we're quite familiar with OpenBSD and Pf, so hesitant at moving away from the system to something else such as dedicated Cisco hardware. I'm currently thinking of moving the systems to some HP DL-series 1U machines (model yet to be determined). I'm curious to hear if other people use a setup like this in their business, or have migrated to or away from one.

  Read the article

• What could cause my LAN Pings be greater than 100ms?

  - by James Holland

  I have 2 servers (Both: Windows Server 2008, Dual Xeon 2.8Ghz, 32GB RAM, 8 x 15k SAS Drives). One of them is a DC / Web server / Exchange Server, the other is a SQL Server (2008). I have a 48 port Netgear GS748T Gigabit switch. When I ping from server to server, I get ping times <1ms, great, but when I ping from a PC, I get varying pings from the occasional <1ms to 500ms!! If I log into either server and look at Task Manager, CPU usage peaks at 20%, memory usage is 100%, but I am led to believe this is normal as Exchange will just use as much as you have, and release it when requested. Network usage peaks at 1%. I really don't understand how the ping can vary that much. I know I am giving very little info, but this is all I know, I apologise, but can anyone help? In response to question, I have pinged by both IP address and hostname, no difference in ping times.

  Read the article

• How to make use of movie events imported by imovie 09 from a DVR

  - by overboming

  I have imported about 100 clips of video from my DVR using imovie 09 and they are all saved under movie events folder, this is ok. The problem is all the movie events files are not in standard formats, they are in some 'Apple Intermediate Format' only Quicktime and iMovie recoginize and play. My problem is I simply want to give my 100 clips of video to someone using PC and this intermediate format produced by imovie is not playable or convertable by anything I have found. Now the only option for me seems to be creating a project in iMovie and drag all the clips into the project and then export these 100 clips into a single standard file, but iMovie doesn't even let me conveninent do that, I can only click at some clip, select all, drag into the project, and repeat for 100 more times, Is there a alternative way I can do so? (or use Quicktime player to convert video formats one by one). Thanks

  Read the article

• My C disk show 33gb less space then i have bcs of hidden or encrypted files i cant find

  - by Peter

  Hello I was hoping some one could help me my drive has 92gbs used space, 95gbs free out of 220 partition 33gbs in the air i cant find, already did cleanup, emptied recycle bin, history and temp files also and I believe sin Ive seen before its possibly space my brother used with a program he uses to hide (possibly encrypted) files dont know the name just seen him do it on usb and pc dont appear visible or hidden and result is what you read above is there any way of finding them to delete them hence my brother is nowhere to b found or could it be something else??? already tried freecommander also.

  Read the article

• *.exe is not a valid win32 application

  - by Sohail

  Hi everybody. recently I've bought a VGA card, "ATI Radeon HD4650", and after that I installed it on my PC, i cant run any .exe files just from my CD-Rom ! even when i attempt to install the driver of VGA Card, I couldn't do that, So I downloaded it and installed it with no problems. after that when I try to install some games from DVD (more than 5 different games I have tried) it prompt me with: "setup.exe is not a valid win32 application" therefore I cant install the game, in addition I need to say that there's nothing wrong with DVD's and my DVD-Rom. I would really appreciate if you just can help me through this one !

  Read the article

• USB resets with Ubuntu 9.10

  - by Grumbel

  Since the upgrade to Ubuntu 9.10 I have issues with getting USB device resets on my Maxtor OneTouch USB harddrive: Nov 9 20:54:37 localhost kernel: [32459.100021] usb 2-2: reset high speed USB device using ehci_hcd and address 4 Nov 9 21:54:37 localhost kernel: [36059.100017] usb 2-2: reset high speed USB device using ehci_hcd and address 4 Nov 9 23:24:37 localhost kernel: [41459.112025] usb 2-2: reset high speed USB device using ehci_hcd and address 4 The device itself continues to work fine, the resets however wake the device out of its sleep state and thus cause it to spin up, which is very annoying. Interestingly, as the log shows, the resets happen at pretty regular intervals (i.e. one hour or half an hour), not randomly. An USB card reader seems to have the same issues, while another USB harddrive from a different manufactor works fine on the same PC. What could be causing this and how could I fix it?

  Read the article

• How to "restart/repair" an USB port?

  - by Click Ok

  My laptop has two USB ports, but one is broken, so I use a USB hub in the other good USB port. In that USB hub, I use a mouse and keyboard. Suddenly, that USB port doesn't detect the mouse and the keyboard (even with the light of the hub is on), and the only solution that I found is restarting the laptop. But just some minutes and the keyboard and mouse goes undetected again... Is there some method, software, etc. to "restart/repair" the USB port without restarting the PC?

  Read the article

• VPN Connects with local access only

  - by user20102

  I have Windows Server 2008 and I have set up a VPN. When a user logs into their VPN they can not view the internet. It comes up as local access only on the the client PC. On the server when I go to the Network And Sharing Centre it displays (Network) with local and internet below it has the RAS Dial-in interface and it displays as local only there as well. I want all users that connect to my VPN to have internet access (full access). If anyone can help me it would be appreciated. Also I've activated dial-in properties and I've done it via policy who can access the VPN and internet. It still doesn't work, but there is a connection but just local only. Thanks

  Read the article

• TrueCrypt Failing to Decrypt External Hard Drive after changing Enclosures

  - by Anx Ara

  I have a 4TB external hard drive that was previously encrypted using TrueCrypt. The power source on the hard drive enclosure failed, so I had to switch the hard drive itself into a new enclosure. I can no longer decrypt the hard drive using TrueCrypt, as it says my password is wrong. I am certain that I entering the correct password. Additionally, in TrueCrypt, when I try to mount the volume under "Select Device", it shows the following: Harddisk 5: 3.6TB Device\Harddisk5\Partition 1 H: 465GB Whereas before I changed the enclosure it would show: Harddisk 5: 3.6TB Device\Harddisk5\Partition 1 H: 3.6TB I am on a Windows 8 PC and using TrueCrypt 7.1a. How can I get it to decrypt properly?

  Read the article

• Virus sending phishing emails through exchange server

  - by therulebookman

  It appears that there is a virus on my network somewhere that is sending phishing emails through my exchange server. I can see the messages in message tracking and I see many SMTP errors for NDR's and rejected connections from external servers, but I do not see any SMTP authentications and I have logging up to MAX. How can I find the IP or hostname of the PC that is infected? Or is there some other explanation than virus? Anti-virus scan on server is clean. Server is not an open relay. Thanks

  Read the article

• Error in Windows 7 after watching a MOV file

  - by JosephStyons

  Ever since watching a .MOV file with Windows Media Player on my pc, I am sporadically getting the below error. Does anyone know the cause of this, or a good way to fix it? This link has a hotfix, but it only applies to Windows XP. --------------------------- Microsoft Visual C++ Runtime Library --------------------------- Runtime Error! Program: C:\Windows\system32\DllHost.exe This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information. --------------------------- OK --------------------------- I am running Windows 7 with all updates installed.

  Read the article

• Graphics card failure, anything I could try...

  - by ILMV

  My gaming PC has decided to die, it's not the first time but usually a quick ATX reset brings it back to life. Today it didn't. I disconnect all unessasary devices so I've only got the case button / LED cables, GPU, CPU, RAM and power connected, the computer still didn't turn on. I've not got a speaker on my motherboard so found a spare one I have for testing and when the machine starts up I get one long beep and two short beeps from my Award BIOS, which apparently means a video card error. I change it with the GPU from another machine and all works well. Q: So I have a faulty graphics card (an nVidia 8800GT OC), is there anything I can try to resurect it?

  Read the article

• Mac friendly file sharing from VirtualBox

  - by kitsched

  I have set up Ruby on Rails on Ubuntu into a VirtualBox instance on my PC, I enabled Samba and I'm connecting to it via the home network from my Mac. All is fine except that I have some issues deleting some files from inside applications e.g. in Sublime Text 2 when I right click a file in the browser and select delete nothing happens (same in my Git client). To be able to delete files I have to navigate to the folder in Finder (which leaves those nasty .DS_Store files scattered all around) or issue the delete command from the terminal (inconvenient). If you're asking why I'm using VirtualBox for Rails instead of doing the development directly on the Mac it's because the ease of portability. So my question is: are there any network sharing options which I could use to make the Linux instance play nicer with my Mac?

  Read the article

• Safari MAC proxy bypass for IPv6

  - by rhi

  I'm a first-time n00b on Mac ; (but have been doing computers since before PC's). This Mac has 2 VLANs, vlan0 in IPv4, vlan1 in IPv6. Safari can surf via IPv4 squid proxy OK. Safari can surf via IPv6 natively, if I switch off the proxy, OK. How do I set up the Settings - Network - Interface - Advanced - Proxies to "bypass" IPv6 ? Current Settings include variations along the lines of ... "*.local, 10.0.0.0/8, 192.168.0.0/16, 172.16.0.0/12 , ::, ipv6 " but don't work as expected. I want Safari to go out on its own with IPv6, not crash at the proxy with "malformed URL" Thanks, //rhi

  Read the article

• Gigabyte Motherboard + Adaptec RAID = No Booting from any drives

  - by Farseeker

  I have a brand new PC, just out of the box. It has a Gigabyte GA-P55-USB3 motherboard. I also have an Adaptec ASR-2504 SAS RAID card with 2x 15k Seagate Barracuda SAS drives attached. After the motherboard init's its on-board RAID it then init's the Adaptec RAID. It detects all the RAID devices OK, but when it gets to Loading Operating System... (i.e. right before it should load the OS) it just sits there forever, doing nothing: If I force it to boot from the optical drive, you see it spin up for a few seconds then die down again. If I remove the Adaptec RAID card, everything works perfectly. As soon as it's plugged back in, it never gets past that stage. The RAID card should be perfectly fine (it was before), but I have raised a case with Adaptec anyway. Any suggestions on what I can try to get these two to play nicely together?

  Read the article

< Previous Page | 217 218 219 220 221 222 223 224 225 226 227 228  | Next Page >