Search Results

Search found 56648 results on 2266 pages for 'vaibhav tekamwww developerit com'.

Page 2211/2266 | < Previous Page | 2207 2208 2209 2210 2211 2212 2213 2214 2215 2216 2217 2218  | Next Page >

• NVIDIA graphics driver in Ubuntu 12.04

  - by user924501

  So my overall goal is that I want to be able to code with CUDA enabled applications. However, upon many days of searching, using installation walkthroughs, and reinstalling countless times after driver failure... I'm now here as a last resort. I cannot get Ubuntu 12.04 LTS to install the NVIDIA 295.59 driver for my GeForce GT 540M NVIDIA graphics card. My main system specs is as follows... (I believe having the Intel processor may be the problem) DELL Laptop XPS L502X Intel® Core™ i7-2620M CPU @ 2.70GHz × 4 Intel Integrated Graphics 64 bit NVIDIA GeForce GT 540M Ubuntu 12.04 LTS All other specs are irrelevant unless I forgot something? Methods Tried: aptitude install nvidia-current (all packages) Results: Nothing really happened. Nothing in the additional drivers menu appeared, nor was the NVIDIA X Server settings application allowing access because it thought there was no NVIDIA X Server installed. Downloaded driver from nvidia.com. Set nomodeset in the grub boot menu through /boot/grub/grub.cfg Went to console and turned off lightdm. Installed the driver, but it said the pre-install failed? (mean anything?) Started up lightdm again. Results: NVIDIA X Server settings still didn't notice it. Even tried to do nvidia-xconfig multiple times. I also went into the config file to make sure the driver setting said "nvidia". aptitude install nvidia-173 (all packages) Results: Couldn't find the xorg-video-abi-10 virtual package. It was nowhere to be found and the ubuntu forums everywhere had no answers. Lots of people were having this problem. This is easily done in windows, simply download the driver and debug in visual studio with no problems at all. I'd like clear step-by-step instructions on how I should go about this. I'm relatively new to linux but I can find my way around pretty well so you aren't talking to a straight-up beginner. Also, if you think another thread may have the answer please post because I was having a hard time looking for my specific type of problem. TL;DR I want to have access to my GPU so I can code with CUDA while in Ubuntu 12.04 on my 64 bit laptop that also has Intel integrated graphics on the processor. Solution: sudo apt-add-repository ppa:ubuntu-x-swat/x-updates && sudo apt-get update && sudo apt-get upgrade && sudo apt-get install nvidia-current

  Read the article

• Converting this code from ASP to PHP

  - by jethomas

  I'll admit I'm a novice programmer and really the only experience I have is in classic ASP. I'm looking for a way to convert this asp code to PHP. For a customer who only has access to a linux box but also as a learning tool for me. Thanks in advance for the help: Recordset and Function: Function pd(n, totalDigits) if totalDigits > len(n) then pd = String(totalDigits-len(n),"0") & n else pd = n end if End Function 'declare the variables Dim Connection Dim Recordset Dim SQL Dim SQLDate SQLDate = Year(Date)& "-" & pd(Month(Date()),2)& "-" & pd(Day(Date()),2) 'declare the SQL statement that will query the database SQL = "SELECT * FROM tblXYZ WHERE element_8 = 2 AND element_9 > '" & SQLDate &"'" 'create an instance of the ADO connection and recordset objects Set Connection = Server.CreateObject("ADODB.Connection") Set Recordset = Server.CreateObject("ADODB.Recordset") 'open the connection to the database Connection.Open "PROVIDER=MSDASQL;DRIVER={MySQL ODBC 5.1 Driver};SERVER=localhost;UID=xxxxx;PWD=xxxxx;database=xxxxx;Option=3;" 'Open the recordset object executing the SQL statement and return records Recordset.Open SQL,Connection Display page/loop: Dim counter counter = 0 While Not Recordset.EOF counter = counter + 1 response.write("<div><td width='200' valign='top' align='center'><a href='" & Recordset("element_6") & "' style='text-decoration: none;'><div id='ad_header'>" & Recordset("element_3") & "</div><div id='store_name' valign='bottom'>" & Recordset("element_5") & "</div><img id='photo-small-img' src='http://xyz.com/files/" & Recordset("element_7") & "' /><br /><div id='ad_details'>"& Recordset("element_4") & "</div></a></td></div>") Recordset.MoveNext If counter = 3 Then Response.Write("</tr><tr>") counter = 0 End If Wend

  Read the article

• How to make item view render rich (html) text in PyQt?

  - by Giorgio Gelardi

  I'm trying to translate code from this thread in python: import sys from PyQt4.QtCore import * from PyQt4.QtGui import * __data__ = [ "Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.", "Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat.", "Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur.", "Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum." ] def get_html_box(text): return '''<table border="0" width="100%"><tr width="100%" valign="top"> <td width="1%"><img src="softwarecenter.png"/></td> <td><table border="0" width="100%" height="100%"> <tr><td><b><a href="http://www.google.com">titolo</a></b></td></tr> <tr><td>{0}</td></tr><tr><td align="right">88/88/8888, 88:88</td></tr> </table></td></tr></table>'''.format(text) class HTMLDelegate(QStyledItemDelegate): def paint(self, painter, option, index): model = index.model() record = model.listdata[index.row()] doc = QTextDocument(self) doc.setHtml(get_html_box(record)) doc.setTextWidth(option.rect.width()) painter.save() ctx = QAbstractTextDocumentLayout.PaintContext() ctx.clip = QRectF(0, option.rect.top(), option.rect.width(), option.rect.height()) dl = doc.documentLayout() dl.draw(painter, ctx) painter.restore() def sizeHint(self, option, index): model = index.model() record = model.listdata[index.row()] doc = QTextDocument(self) doc.setHtml(get_html_box(record)) doc.setTextWidth(option.rect.width()) return QSize(doc.idealWidth(), doc.size().height()) class MyListModel(QAbstractListModel): def __init__(self, parent=None, *args): super(MyListModel, self).__init__(parent, *args) self.listdata = __data__ def rowCount(self, parent=QModelIndex()): return len(self.listdata) def data(self, index, role=Qt.DisplayRole): return index.isValid() and QVariant(self.listdata[index.row()]) or QVariant() class MyWindow(QWidget): def __init__(self, *args): super(MyWindow, self).__init__(*args) # listview self.lv = QListView() self.lv.setModel(MyListModel(self)) self.lv.setItemDelegate(HTMLDelegate(self)) self.lv.setResizeMode(QListView.Adjust) # layout layout = QVBoxLayout() layout.addWidget(self.lv) self.setLayout(layout) if __name__ == "__main__": app = QApplication(sys.argv) w = MyWindow() w.show() sys.exit(app.exec_()) Element's size and position are not calculated correctly I guess, perhaps because I haven't understand at all the style related parts from original code. Can someone help me?

  Read the article

• Multi domain rails app. How to intelligently use MVC?

  - by denial

  Background: We have app a, b, and plan to add more apps into this same application. The apps are similar enough they could share many views, assets, and actions. Currently a,b live in a single rails app(2.3.10). c will be similar enough that it could also be in this rails app. The problem: As we continue to add more apps to this one app, there's going to be too much case logic that the app will soon become a nightmare to maintain. There will also be potential namespace issues. However, the apps are very similar in function and layout, it also makes sense to keep them in one app so that it's one app to maintain(since roughly 50% of site look/functionality will be shared). What we are trying to do is keep this as clean as possible so it's easy for multiple teams to work on and easy to maintain. Some things we've thought about/are trying: Engines. Make each app an engine. This would let us base routes on the domain. It also allows us to pull out controllers, models and views for the specific app. This solution does not seem ideal as we won't be reusing the apps any time soon. And explicitly stating the host in the routes doesn't seem right. Skinning/themes. The auth logic would be different between the apps. Each user model would be different. So it's not just a skinning problem. In app/view add folder sitea for sitea views, siteb for siteb views and so on. Do the same for controllers and models. This is still pretty messy and since it didn't follow naming conventions, it did not work with rails so nicely and made much of the code messier. Making another rails app. We just didn't want to maintain the same controller or view in 2 apps if they are identical. What we want to do is make the app intelligently use a controller based on the host. So there would be a sessions controller for each app, and perhaps some parent session controller for shared logic(not needed now). In each of these session controllers, it handles authentication for that specific app. So if the domain is a.mysite.com, it would use session controller for app a and know to use app a's views,models,controllers. And if the domain is b.mysite, it would use the session controller for b. And there would be a user model for a and user model for b, which also would be determined by the domain. Does anyone have any suggestions or experience with this situation? And ideally using rails 2.3.x as updating to rails 3 isn't an option right now.

  Read the article

• please help me to find Bug in my Code (segmentation fault)

  - by Vikramaditya Battina

  i am tring to solve this http://www.spoj.com/problems/LEXISORT/ question it working fine in visual studio compiler and IDEone also but when i running in SPOJ compiler it is getting SEGSIGV error Here my code goes #include<stdio.h> #include<stdlib.h> #include<string.h> char *getString(); void lexisort(char **str,int num); void countsort(char **str,int i,int num); int main() { int num_test; int num_strings; char **str; int i,j; scanf("%d",&num_test); for(i=0;i<num_test;i++) { scanf("%d",&num_strings); str=(char **)malloc(sizeof(char *)*num_strings); for(j=0;j<num_strings;j++) { str[j]=(char *)malloc(sizeof(char)*11); scanf("%s",str[j]); } lexisort(str,num_strings); for(j=0;j<num_strings;j++) { printf("%s\n",str[j]); free(str[j]); } free(str); } return 0; } void lexisort(char **str,int num) { int i; for(i=9;i>=0;i--) { countsort(str,i,num); } } void countsort(char **str,int i,int num) { int buff[52]={0,0},k,x; char **temp=(char **)malloc(sizeof(char *)*num); for(k=0;k<52;k++) { buff[k]=0; } for(k=0;k<num;k++) { if(str[k][i]>='A' && str[k][i]<='Z') { buff[(str[k][i]-'A')]++; } else { buff[26+(str[k][i]-'a')]++; } } for(k=1;k<52;k++) { buff[k]=buff[k]+buff[k-1]; } for(k=num-1;k>=0;k--) { if(str[k][i]>='A' && str[k][i]<='Z') { x=buff[(str[k][i]-'A')]; temp[x-1]=str[k]; buff[(str[k][i]-'A')]--; } else { x=buff[26+(str[k][i]-'a')]; temp[x-1]=str[k]; buff[26+(str[k][i]-'a')]--; } } for(k=0;k<num;k++) { str[k]=temp[k]; } free(temp); }

  Read the article

• Using Entity Framework 4.0 with Code-First and POCO: How to Get Parent Object with All its Children

  - by SirEel

  I'm new to EF 4.0, so maybe this is an easy question. I've got VS2010 RC and the latest EF CTP. I'm trying to implement the "Foreign Keys" code-first example on the EF Team's Design Blog, http://blogs.msdn.com/efdesign/archive/2009/10/12/code-only-further-enhancements.aspx. public class Customer { public int Id { get; set; public string CustomerDescription { get; set; public IList<PurchaseOrder> PurchaseOrders { get; set; } } public class PurchaseOrder { public int Id { get; set; } public int CustomerId { get; set; } public Customer Customer { get; set; } public DateTime DateReceived { get; set; } } public class MyContext : ObjectContext { public RepositoryContext(EntityConnection connection) : base(connection){} public IObjectSet<Customer> Customers { get {return base.CreateObjectSet<Customer>();} } } I use a ContextBuilder to configure MyContext: { var builder = new ContextBuilder<MyContext>(); var customerConfig = _builder.Entity<Customer>(); customerConfig.Property(c => c.Id).IsIdentity(); var poConfig = _builder.Entity<PurchaseOrder>(); poConfig.Property(po => po.Id).IsIdentity(); poConfig.Relationship(po => po.Customer) .FromProperty(c => c.PurchaseOrders) .HasConstraint((po, c) => po.CustomerId == c.Id); ... } This works correctly when I'm adding new Customers, but not when I try to retrieve existing Customers. This code successfully saves a new Customer and all its child PurchaseOrders: using (var context = builder.Create(connection)) { context.Customers.AddObject(customer); context.SaveChanges(); } But this code only retrieves Customer objects; their PurchaseOrders lists are always empty. using (var context = _builder.Create(_conn)) { var customers = context.Customers.ToList(); } What else do I need to do to the ContextBuilder to make MyContext always retrieve all the PurchaseOrders with each Customer?

  Read the article

• How should I organize my C# classes? [closed]

  - by oscar.fimbres

  I'm creating an email generator system. I'm creating some clases and I'm trying to make things right. By the time, I have created 5 classes. Look at the class diagram: I'm going to explain you each one. Person. It's not a big deal. Just have two constructors: Person(fname, lname1, lname2) and Person(token, fname, lname1, lname2). Note that email property stays without value. StringGenerator. This is a static class and it has only a public function: Generate. The function receives a Person class and it will return a list of patterns for the email. MySql. It contains all the necessary to connect to a database. Database. This class inherits from MySql class. It has particular functions for the database. This gets all the registries from a table (function GetPeople) and return a List. Each person from the list contains all data except Email. Also it can add records (List but this must contains an available email). An available email is when an email doesn't have another person. For that reason, I have a method named ExistsEmail. Container. This is the class which is causing me some problems. It's like a temporary container. It supposed to have a people list from GetPeople (in Database class) and for each person it adds, it must generate a list of possible names (StringGenerator.Generate), then it selects one of the list and it must check out if exists in the database or in the same container. As I told above this is temporal, it may none of the possible emails is available. So the user can modify or enter a custom email available and update the list in this container. When all the email's people are available, it sends a list to add in the database, It must have a Flush method, to insert all the people in the database. I'm trying to design correct class. I need a little help to improve or edite the classes, because I want to separate the logic and visual, and learn of you. I hope you've been able to understand me. Any question or doubt, please let me know. Anyway, I attached the solution here to better understand it: http://www.megaupload.com/?d=D94FH8GZ

  Read the article

• Converting my lightweight MySQL DB wrapper into MySQLi. Pesky Problems

  - by Chaplin

  Here is the original code: http://pastebin.com/DNxtmApY. I'm not that interested in prepared statements at the moment, I just want this wrapper updating to MySQLi so once MySQL becomes depreciated I haven't got to update a billion websites. Here is my attempt at converting to MySQLi. <? $database_host = "127.0.0.1"; $database_user = "user"; $database_pass = "pass"; $database_name = "name"; $db = new database($database_host, $database_user, $database_pass, $database_name); class database { var $link, $result; function database($host, $user, $pass, $db) { $this->link = mysqli_connect($host, $user, $pass, $db) or $this->error(); mysqli_select_db($db, $this->link) or $this->error(); } function query($query) { $this->result = mysqli_query($query, $this->link) or $this->error(); $this->_query_count++; return $this->result; } function countRows($result = "") { if ( empty( $result ) ) $result = $this->result; return mysqli_num_rows($result); } function fetch($result = "") { if ( empty( $result ) ) $result = $this->result; return mysqli_fetch_array($result); } function fetch_num($result = "") { if ( empty( $result ) ) $result = $this->result; return mysqli_fetch_array($result, mysqli_NUM); } function fetch_assoc($result = "") { if ( empty( $result ) ) $result = $this->result; return mysqli_fetch_array($result, mysqli_ASSOC); } function escape($str) { return mysqli_real_escape_string($str); } function error() { if ( $_GET["debug"] == 1 ){ die(mysqi_error()); } else { echo "Error in db code"; } } } function sanitize($data) { //apply stripslashes if magic_quotes_gpc is enabled if(get_magic_quotes_gpc()) $data = stripslashes($data); // a mysqli connection is required before using this function $data = trim(mysqli_real_escape_string($data)); return $data; } However it chucks all sorts of errors: Warning: mysql_query(): Access denied for user 'www-data'@'localhost' (using password: NO) in /home/count/Workspace/lib/classes/user.php on line 7 Warning: mysql_query(): A link to the server could not be established in /home/count/Workspace/lib/classes/user.php on line 7 Warning: mysql_fetch_array() expects parameter 1 to be resource, boolean given in /home/count/Workspace/lib/classes/user.php on line 8 Warning: mysqli_fetch_array() expects parameter 1 to be mysqli_result, object given in /home/count/Workspace/lib/classes/database.php on line 31

  Read the article

• Video playback with jQuery Mobile and Phonegap

  - by aritchie

  I'm fairly new to mobile apps, so am trying to knock up a simple video player using Phonegap and jQuery Mobile. The problem is, jQuery mobile appears to be blocking the video playback for some reason. To troubleshoot I stripped it right back to the following HTML, but get the same result, ie a black rectangle where the video should be, but no video playback or controls. <!DOCTYPE html> <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=UTF-8" /> <meta name="viewport" content="width=device-width,initial-scale=1"/> <link rel="stylesheet" type="text/css" href="css/index.css" /> <link rel="stylesheet" href="css/jquery.mobile-1.2.0.min.css" /> <script type="text/javascript" src="cordova-2.2.0.js"></script> <script type="text/javascript" src="js/index.js"></script> <script src="js/jquery-1.8.3.min.js"></script> <script src="js/jquery.mobile-1.2.0.js"></script> <title></title> </head> <body> <div> <video controls autoplay> <source src="video/video1.mp4" type="video/mp4" > </video> </div> </body> </html> If I remove the link to jquery.mobile-1.2.0.js the video shows up and plays, otherwise, just the black rectangle. I don't know jQuery mobile at all, but searching in the js for a reference to the video elements doesn't show up, so I've no idea what is blocking it. The code works fine in Chrome and Firefox. There are no console messages in Xcode. I also tried hooking up to http://debug.phonegap.com/ but this gave no error messages either. Any ideas??

  Read the article

• Attach file to mail using php

  - by ktsixit

  Hi all, I've created a form which contains an upload field file and some other text fields. I'm using php to send the form's data via email and attach the file. This is the code I'm using but it's not working properly. The file is normally attached to the message but the rest of the data is not sent. $body="bla bla bla"; $attachment = $_FILES['cv']['tmp_name']; $attachment_name = $_FILES['cv']['name']; if (is_uploaded_file($attachment)) { $fp = fopen($attachment, "rb"); $data = fread($fp, filesize($attachment)); $data = chunk_split(base64_encode($data)); fclose($fp); } $headers = "From: $email<$email>\n"; $headers .= "Reply-To: <$email>\n"; $headers .= "MIME-Version: 1.0\n"; $headers .= "Content-Type: multipart/related; type=\"multipart/alternative\"; boundary=\"----=MIME_BOUNDRY_main_message\"\n"; $headers .= "X-Sender: $first_name $family_name<$email>\n"; $headers .= "X-Mailer: PHP4\n"; $headers .= "X-Priority: 3\n"; $headers .= "Return-Path: <$email>\n"; $headers .= "This is a multi-part message in MIME format.\n"; $headers .= "------=MIME_BOUNDRY_main_message \n"; $headers .= "Content-Type: multipart/alternative; boundary=\"----=MIME_BOUNDRY_message_parts\"\n"; $message = "------=MIME_BOUNDRY_message_parts\n"; $message .= "Content-Type: text/html; charset=\"utf-8\"\n"; $message .= "Content-Transfer-Encoding: quoted-printable\n"; $message .= "\n"; $message .= "$body\n"; $message .= "\n"; $message .= "------=MIME_BOUNDRY_message_parts--\n"; $message .= "\n"; $message .= "------=MIME_BOUNDRY_main_message\n"; $message .= "Content-Type: application/octet-stream;\n\tname=\"" . $attachment_name . "\"\n"; $message .= "Content-Transfer-Encoding: base64\n"; $message .= "Content-Disposition: attachment;\n\tfilename=\"" . $attachment_name . "\"\n\n"; $message .= $data; //The base64 encoded message $message .= "\n"; $message .= "------=MIME_BOUNDRY_main_message--\n"; $subject = 'bla bla bla'; $to="test@test.com"; mail($to,$subject,$message,$headers); Why isn't the $body data not sent? Can you help me fix it?

  Read the article

• iPhone - NSURLConnection does not receive data

  - by Jukurrpa

  Hi, I have a pretty weird problem with NSURLRequest. I'm using them to make an asynchronous image loading in an UITableView. The first time the tableView displays, all connections from NSURLRequests open correctly but receive absolutely no data, regardless of how long I wait. But as soon as I scroll down in the tableView, the newly created requests for the new cells work perfectly! The only way for the images on top of the tableView to load is to make them disappear by scrolling down and then up again, in order to create new requests. Here is what I do in "cellForRowAtIndexPath": UITableViewCell* cell = [tableView dequeueReusableCellWithIdentifier:@"Cell"]; if (cell == nil) { cell = [[UITableViewCell alloc] initWIthFrame:CGRectMake(0, 0, 300, 60)]; AsyncUIImageView imageView = [[AsynUIImageView alloc] initWithFrame:CGRectMake(0, 0, 60, 60)]; imageView.tag = IMG_VIEW // an enum for tags [cell addSubView:imageView]; [imageView release]; } AsyncUIImageView imageView = (AsyncUIImageView*)[cell viewWithTag:IMG_VIEW]; // I do a few cache checks here, but if the image aint cached I do this: [imageView loadImageFromURL:@"http://someurl.com/somepix.jpg"]; // all urls are different, just an example The AsyncUIImageView inherits from UIImageView and contains an NSURLConnection which opens upon calling the loadImageFromURL method: (void) loadImageFromURL:(NSString*)filename { if (self.connection != nil) [self.connection release]; if (self.data != nil) [self.data release]; NSURLRequest* request = [NSURLRequest requestWithURL:[[NSURL alloc] initWithString:fileName] cachePolicy:NSURLRequestUseProtocolCachePolicy timeoutInterval:10.0]; self.connection = [[NSURLConnection alloc] initWithRequest:request delegate:self]; if (self.connection == nil) return; self.data = [[NSMutableData data] retain]; } I've created the delegate methods "connection: didReceiveData", which appends received data to self.data and "connectionDidFinishLoading" which sets the image and closes the connection once the transfer is complete. These work, but are never called for the first requests I create. I suspect this bug to come from the main thread not giving the first requests the control so they can execute themselves, as the same behavior happens if I keep my finger on the screen after a scroll: connections open themselves, but no data is received until I stop touching the screen. What am I doing wrong?

  Read the article

• How to add fadeIn and fadeOut to idTabs plugin's JS snippet?

  - by iMagdy

  Hi, I am using the jQuery plugin idTabs [ [www.sunsean.com/idTabs][1] ] and it allows me to line tabs and tabs' content via element#id and element href="#id" Ok, so I use this snippet: <script type="text/javascript"> $(document).ready(function() { $("#requestPool").idTabs(); $(".tabs").idTabs(); $(".miniTabs").idTabs(".active"); $(".switchers").idTabs(".activePanel"); }); </script> To run the plugin on two different areas: div#requestPool this has it's own tabs and it's own tab content, Also the div.tabs which is another place and has it's own tabs and it's own tabs content. The div.miniTabs and div.switchers are the divs that includes the tabs links (tabs headers) and I putted them in the snippet to change the default selected tab class from .selected to .active and .activePanel Now, what I would love to add is a nice fadeIn and fadeOut effects to the content of my tabs while browsing through them. Thanks Here is the HTML code for one of the tabbed areas: <div id="requestPool"> <!-- The tabs heads --> <div class="miniTabs"> <a href="#today" class="active">Today</a> <!-- First active tab --> <a href="#tomorrow">Tomorrow</a> <a href="#friday">Friday</a> <a href="#saturday">Saturday</a> <a href="#sunday">Sunday</a> <a href="#monday">Monday</a> <a href="#tuesday">Tuesday</a> </div> <!-- The tabs contents (the ones that I want them to fade in and out while browsing through them using the tabs above) --> <div id="today"class="miniTab"></div> <div id="tomorrow"class="miniTab"></div> <div id="friday"class="miniTab"></div> <div id="saturday"class="miniTab"></div> <div id="sunday"class="miniTab"></div> ...etc the week days </div> Thanks very much (again the tabs are working very fine, but without the fade effect which I want to have).

  Read the article

• c++ multithread array

  - by user1731972

  i'm doing something for fun, trying to learn multithreading Problems passing array by reference to threads but Arno pointed out that my threading via process.h wasn't going to be multi-threaded. What I'm hoping to do is something where I have an array of 100 (or 10,000, doesn't really matter I don't think), and split up the assignment of values to each thread. Example, 4 threads = 250 values per thread to be assigned. Then I can use this filled array for further calculations. Here's some code I was working on (which doesn't work) #include <process.h> #include <windows.h> #include <iostream> #include <fstream> #include <time.h> //#include <thread> using namespace std; void myThread (void *dummy ); CRITICAL_SECTION cs1,cs2; // global int main() { ofstream myfile; myfile.open ("coinToss.csv"); int rNum; long numRuns; long count = 0; int divisor = 1; float holder = 0; int counter = 0; float percent = 0.0; HANDLE hThread[1000]; int array[10000]; srand ( time(NULL) ); printf ("Runs (use multiple of 10)? "); cin >> numRuns; for (int i = 0; i < numRuns; i++) { //_beginthread( myThread, 0, (void *) (array1) ); //??? //hThread[i * 2] = _beginthread( myThread, 0, (void *) (array1) ); hThread[i*2] = _beginthread( myThread, 0, (void *) (array) ); } //WaitForMultipleObjects(numRuns * 2, hThread, TRUE, INFINITE); WaitForMultipleObjects(numRuns, hThread, TRUE, INFINITE); } void myThread (void *param ) { //thanks goes to stockoverflow //http://stackoverflow.com/questions/12801862/problems-passing-array-by-reference-to-threads int *i = (int *)param; for (int x = 0; x < 1000000; x++) { //param[x] = rand() % 2 + 1; i[x] = rand() % 2 + 1; } } Can anyone explain why it isn't working?

  Read the article

• SQL Cartesian product joining table to itself and inserting into existing table

  - by Emma

  I am working in phpMyadmin using SQL. I want to take the primary key (EntryID) from TableA and create a cartesian product (if I am using the term correctly) in TableB (empty table already created) for all entries which share the same value for FieldB in TableA, except where TableA.EntryID equals TableA.EntryID So, for example, if the values in TableA were: TableA.EntryID TableA.FieldB 1 23 2 23 3 23 4 25 5 25 6 25 The result in TableB would be: Primary key EntryID1 EntryID2 FieldD (Default or manually entered) 1 1 2 Default value 2 1 3 Default value 3 2 1 Default value 4 2 3 Default value 5 3 1 Default value 6 3 2 Default value 7 4 5 Default value 8 4 6 Default value 9 5 4 Default value 10 5 6 Default value 11 6 4 Default value 12 6 5 Default value I am used to working in Access and this is the first query I have attempted in SQL. I started trying to work out the query and got this far. I know it's not right yet, as I’m still trying to get used to the syntax and pieced this together from various articles I found online. In particular, I wasn’t sure where the INSERT INTO text went (to create what would be an Append Query in Access). SELECT EntryID FROM TableA.EntryID TableA.EntryID WHERE TableA.FieldB=TableA.FieldB TableA.EntryID<>TableA.EntryID INSERT INTO TableB.EntryID1 TableB.EntryID2 After I've got that query right, I need to do a TRIGGER query (I think), so if an entry changes it's value in TableA.FieldB (changing it’s membership of that grouping to another grouping), the cartesian product will be re-run on THAT entry, unless TableB.FieldD = valueA or valueB (manually entered values). I have been using the Designer Tab. Does there have to be a relationship link between TableA and TableB. If so, would it be two links from the EntryID Primary Key in TableA, one to each EntryID in TableB? I assume this would not work because they are numbered EntryID1 and EntryID2 and the name needs to be the same to set up a relationship? If you can offer any suggestions, I would be very grateful. Research: http://www.fluffycat.com/SQL/Cartesian-Joins/ Cartesian Join example two Q: You said you can have a Cartesian join by joining a table to itself. Show that! Select * From Film_Table T1, Film_Table T2;

  Read the article

• Calling managed code from unmanaged win32 assembly dll - crash

  - by JustGreg

  I'm developing a serial port dll in win32 assembly (MASM32). It has its own thread checking multiple events and at a specified buffer treshold it'd notify the managed main application by calling a callback function. It just a call with no arguments/return value. At startup the main application stores the callback function's address by calling a function in the dll: pCallBackFunction dd 0 SetCallBackPointer proc pcb:DWORD mov eax, pcb mov pCallBackFunction, eax call DWORD ptr pCallBackFunction ; verify it immediately ret SetCallBackPointer endp The upper function immediately calls back the managed application callback routine for verification purposes. It is working fine. However, when I place the call instruction to other functions in the dll it crashes the application. It doesn't matter if the call is in a simple function or in the threadproc of the dll. For example: OpenPort proc pn:byte,br:dword, inputbuffersize: dword, outputbuffersize:dword, tresholdsize: dword LOCAL dcb: DCB LOCAL SerialTimeOuts: COMMTIMEOUTS call DWORD ptr pCallBackFunction xor eax, eax mov al, pn mov [com_port+3],al etc. etc. will crash at call DWORD ptr pCallBackFunction always. Since I call SetCallBackPointer first to store a valid address in pCallBackFunction, it should have a valid address. My managed app is written in C# and the relevant part is: public partial class Form1 : Form { public delegate void CallBackDelegate(); public static CallBackDelegate mydelegate; [DllImport("serialport.dll")] private static extern void SetCallBackPointer(CallBackDelegate Delegate); [DllImport("serialport.dll")] public static extern int OpenPort(byte com, uint br, uint inbufsize, uint outbufsize, uint treshsize); public Form1() { InitializeComponent(); mydelegate =new CallBackDelegate(CallbackFunction); SetCallBackPointer(mydelegate); unsafe { int sysstat; int hResult; hResult = OpenPort(Convert.ToByte('5'), 9600, 306, 4, 4); } } public static void CallbackFunction() { MessageBox.Show( "CallBack Function Called by Windows DLL"); } The VS debugger reported that the dll had tried to read/write from/to a protected memory address. But when calling SetCallBackPointer there is no such problem. What am I doing wrong here? Any tips would be great!

  Read the article

• LINQ – SequenceEqual() method

  - by nmarun

  I have been looking at LINQ extension methods and have blogged about what I learned from them in my blog space. Next in line is the SequenceEqual() method. Here’s the description about this method: “Determines whether two sequences are equal by comparing the elements by using the default equality comparer for their type.” Let’s play with some code: 1: int[] numbers = { 5, 4, 1, 3, 9, 8, 6, 7, 2, 0 }; 2: // int[] numbersCopy = numbers; 3: int[] numbersCopy = { 5, 4, 1, 3, 9, 8, 6, 7, 2, 0 }; 4:  5: Console.WriteLine(numbers.SequenceEqual(numbersCopy)); This gives an output of ‘True’ – basically compares each of the elements in the two arrays and returns true in this case. The result is same even if you uncomment line 2 and comment line 3 (I didn’t need to say that now did I?). So then what happens for custom types? For this, I created a Product class with the following definition: 1: class Product 2: { 3: public int ProductId { get; set; } 4: public string Name { get; set; } 5: public string Category { get; set; } 6: public DateTime MfgDate { get; set; } 7: public Status Status { get; set; } 8: } 9:  10: public enum Status 11: { 12: Active = 1, 13: InActive = 2, 14: OffShelf = 3, 15: } In my calling code, I’m just adding a few product items: 1: private static List<Product> GetProducts() 2: { 3: return new List<Product> 4: { 5: new Product 6: { 7: ProductId = 1, 8: Name = "Laptop", 9: Category = "Computer", 10: MfgDate = new DateTime(2003, 4, 3), 11: Status = Status.Active, 12: }, 13: new Product 14: { 15: ProductId = 2, 16: Name = "Compact Disc", 17: Category = "Water Sport", 18: MfgDate = new DateTime(2009, 12, 3), 19: Status = Status.InActive, 20: }, 21: new Product 22: { 23: ProductId = 3, 24: Name = "Floppy", 25: Category = "Computer", 26: MfgDate = new DateTime(1993, 3, 7), 27: Status = Status.OffShelf, 28: }, 29: }; 30: } Now for the actual check: 1: List<Product> products1 = GetProducts(); 2: List<Product> products2 = GetProducts(); 3:  4: Console.WriteLine(products1.SequenceEqual(products2)); This one returns ‘False’ and the reason is simple – this one checks for reference equality and the products in the both the lists get different ‘memory addresses’ (sounds like I’m talking in ‘C’). In order to modify this behavior and return a ‘True’ result, we need to modify the Product class as follows: 1: class Product : IEquatable<Product> 2: { 3: public int ProductId { get; set; } 4: public string Name { get; set; } 5: public string Category { get; set; } 6: public DateTime MfgDate { get; set; } 7: public Status Status { get; set; } 8:  9: public override bool Equals(object obj) 10: { 11: return Equals(obj as Product); 12: } 13:  14: public bool Equals(Product other) 15: { 16: //Check whether the compared object is null. 17: if (ReferenceEquals(other, null)) return false; 18:  19: //Check whether the compared object references the same data. 20: if (ReferenceEquals(this, other)) return true; 21:  22: //Check whether the products' properties are equal. 23: return ProductId.Equals(other.ProductId) 24: && Name.Equals(other.Name) 25: && Category.Equals(other.Category) 26: && MfgDate.Equals(other.MfgDate) 27: && Status.Equals(other.Status); 28: } 29:  30: // If Equals() returns true for a pair of objects 31: // then GetHashCode() must return the same value for these objects. 32: // read why in the following articles: 33: // http://geekswithblogs.net/akraus1/archive/2010/02/28/138234.aspx 34: // http://stackoverflow.com/questions/371328/why-is-it-important-to-override-gethashcode-when-equals-method-is-overriden-in-c 35: public override int GetHashCode() 36: { 37: //Get hash code for the ProductId field. 38: int hashProductId = ProductId.GetHashCode(); 39:  40: //Get hash code for the Name field if it is not null. 41: int hashName = Name == null ? 0 : Name.GetHashCode(); 42:  43: //Get hash code for the ProductId field. 44: int hashCategory = Category.GetHashCode(); 45:  46: //Get hash code for the ProductId field. 47: int hashMfgDate = MfgDate.GetHashCode(); 48:  49: //Get hash code for the ProductId field. 50: int hashStatus = Status.GetHashCode(); 51: //Calculate the hash code for the product. 52: return hashProductId ^ hashName ^ hashCategory & hashMfgDate & hashStatus; 53: } 54:  55: public static bool operator ==(Product a, Product b) 56: { 57: // Enable a == b for null references to return the right value 58: if (ReferenceEquals(a, b)) 59: { 60: return true; 61: } 62: // If one is null and the other not. Remember a==null will lead to Stackoverflow! 63: if (ReferenceEquals(a, null)) 64: { 65: return false; 66: } 67: return a.Equals((object)b); 68: } 69:  70: public static bool operator !=(Product a, Product b) 71: { 72: return !(a == b); 73: } 74: } Now THAT kinda looks overwhelming. But lets take one simple step at a time. Ok first thing you’ve noticed is that the class implements IEquatable<Product> interface – the key step towards achieving our goal. This interface provides us with an ‘Equals’ method to perform the test for equality with another Product object, in this case. This method is called in the following situations: when you do a ProductInstance.Equals(AnotherProductInstance) and when you perform actions like Contains<T>, IndexOf() or Remove() on your collection Coming to the Equals method defined line 14 onwards. The two ‘if’ blocks check for null and referential equality using the ReferenceEquals() method defined in the Object class. Line 23 is where I’m doing the actual check on the properties of the Product instances. This is what returns the ‘True’ for us when we run the application. I have also overridden the Object.Equals() method which calls the Equals() method of the interface. One thing to remember is that anytime you override the Equals() method, its’ a good practice to override the GetHashCode() method and overload the ‘==’ and the ‘!=’ operators. For detailed information on this, please read this and this. Since we’ve overloaded the operators as well, we get ‘True’ when we do actions like: 1: Console.WriteLine(products1.Contains(products2[0])); 2: Console.WriteLine(products1[0] == products2[0]); This completes the full circle on the SequenceEqual() method. See the code used in the article here.

  Read the article

• 1067: Implicit coercion of a value of type theplayclass to an unrelated type main

  - by Minelava

  I need help because I want to create a gameover screen that display score. However, there's an error that prevent me from transferring the score from theplayclass.as to thegameoverclass.as. Are there ways to pass a value to another movieclip without causing any errors. I refer the source code from this website : http://www.emanueleferonato.com/2008/12/17/designing-the-structure-of-a-flash-game-as3-version/ Here's the error C:\Users\xxx\Downloads\Migrate\test\theplayclass.as, Line 54, Column 41 1067: Implicit coercion of a value of type theplayclass to an unrelated type main. main.as package { import flash.display.MovieClip; import flash.events.Event; public class main extends MovieClip { public var playClass:theplayclass; public var gameOverClass:thegameoverclass; public function main() { showWin(); } public function showWin() { playClass = new theplayclass(this); addChild(playClass); } public function showGameOver() { gameOverClass = new thegameoverclass(this); addChild(gameOverClass); removeChild(playClass); playClass = null; } } } theplayclass.as package { import flash.display.MovieClip; import flash.events.*; public class theplayclass extends MovieClip { private var mainClass:main; var gameScore:Number; var gameOverScore:thegameoverclass; public function theplayclass(passedClass:main) { mainClass = passedClass; scoreText.text ="0"; gameScore = 0; win.addEventListener(MouseEvent.CLICK, showwinFunction); next.addEventListener(MouseEvent.CLICK, showgameoverFunction); addEventListener(Event.ADDED_TO_STAGE, addToStage); addEventListener(Event.ENTER_FRAME, changeScore); } public function addToStage(e:Event):void { this.x = 0; this.y = 0; } private function showwinFunction(e:MouseEvent):void { gameScore+=50; } private function changeScore(e:Event):void { scoreText.text =""+gameScore; } public function showgameoverFunction(e:MouseEvent) { mainClass.showGameOver(); gameOverScore = new thegameoverclass(this); gameOverScore.setTextScore(gameScore); } } } thegameoverclass.as package { import flash.display.MovieClip; import flash.events.MouseEvent; import flash.events.*; public class thegameoverclass extends MovieClip { var mainClass:main; var scorePoints:Number; public function thegameoverclass(passedClass:main) { mainClass = passedClass; finalScore.text = "test"; } public function setTextScore(textToSet:Number) { finalScore.text = ""+scorePoints; } } }

  Read the article

• Hibernate Persistence problems with Bean Mapping (Dozer)

  - by BuffaloBuffalo

  I am using Hibernate 3, and having a particular issue when persisting a new Entity which has an association with an existing detached entity. Easiest way to explain this is via code samples. I have two entities, FooEntity and BarEntity, of which a BarEntity can be associated with many FooEntity: @Entity public class FooEntity implements Foo{ @Id private Long id; @ManyToOne(targetEntity = BarEntity.class) @JoinColumn(name = "bar_id", referencedColumnName = "id") @Cascade(value={CascadeType.ALL}) private Bar bar; } @Entity public class BarEntity implements Bar{ @Id private Long id; @OneToMany(mappedBy = "bar", targetEntity = FooEntity.class) private Set<Foo> foos; } Foo and Bar are interfaces that loosely define getters for the various fields. There are corresponding FooImpl and BarImpl classes that are essentially just the entity objects without the annotations. What I am trying to do is construct a new instance of FooImpl, and persist it after setting a number of fields. The new Foo instance will have its 'bar' member set to an existing Bar (runtime being a BarEntity) from the database (retrieved via session.get(..)). After the FooImpl has all of its properties set, Apache Dozer is used to map between the 'domain' object FooImpl and the Entity FooEntity. What Dozer is doing in the background is instantiating a new FooEntity and setting all of the matching fields. BarEntity is cloned as well via instantiation and set the FooEntity's 'bar' member. After this occurs, passing the new FooEntity object to persist. This throws the exception: org.hibernate.PersistentObjectException: detached entity passed to persist: com.company.entity.BarEntity Below is in code the steps that are occurring FooImpl foo = new FooImpl(); //returns at runtime a persistent BarEntity through session.get() Bar bar = BarService.getBar(1L); foo.setBar(bar); ... //This constructs a new instance of FooEntity, with a member 'bar' which itself is a new instance that is detached) FooEntity entityToPersist = dozerMapper.map(foo, FooEntity.class); ... session.persist(entityToPersist); I have been able to resolve this issue by either removing or changing the @Cascade annotation, but that limits future use for say adding a new Foo with a new Bar attached to it already. Is there some solution here I am missing? I would be surprised if this issue hasn't been solved somewhere before, either by altering how Dozer Maps the children of Foo or how Hibernate reacts to a detached Child Entity.

  Read the article

• Swing: does DefaultBoundedRangeModel coalesce multiple events?

  - by Jason S

  I have a JProgressBar displaying a BoundedRangeModel which is extremely fine grained and I was concerned that updating it too often would slow down my computer. So I wrote a quick test program (see below) which has a 10Hz timer but each timer tick makes 10,000 calls to microtick() which in turn increments the BoundedRangeModel. Yet it seems to play nicely with a JProgressBar; my CPU is not working hard to run the program. How does JProgressBar or DefaultBoundedRangeModel do this? They seem to be smart about how much work it does to update the JProgressBar, so that as a user I don't have to worry about updating the BoundedRangeModel's value. package com.example.test.gui; import java.awt.event.ActionEvent; import java.awt.event.ActionListener; import javax.swing.BoundedRangeModel; import javax.swing.DefaultBoundedRangeModel; import javax.swing.JFrame; import javax.swing.JPanel; import javax.swing.JProgressBar; import javax.swing.Timer; public class BoundedRangeModelTest1 extends JFrame { final private BoundedRangeModel brm = new DefaultBoundedRangeModel(); final private Timer timer = new Timer(100, new ActionListener() { @Override public void actionPerformed(ActionEvent arg0) { tick(); } }); public BoundedRangeModelTest1(String title) { super(title); JPanel p = new JPanel(); p.add(new JProgressBar(this.brm)); getContentPane().add(p); this.brm.setMaximum(1000000); this.brm.setMinimum(0); this.brm.setValue(0); } protected void tick() { for (int i = 0; i < 10000; ++i) { microtick(); } } private void microtick() { this.brm.setValue(this.brm.getValue()+1); } public void start() { this.timer.start(); } static public void main(String[] args) { BoundedRangeModelTest1 f = new BoundedRangeModelTest1("BoundedRangeModelTest1"); f.pack(); f.setVisible(true); f.setDefaultCloseOperation(EXIT_ON_CLOSE); f.start(); } }

  Read the article

• Google maps api v3: geocoding multiple addresses and infowindow

  - by user2536786

  I am trying to get infowindow for multiple addresses. Its creating markers but when I click on markers, infowindow is not popping up. Please help and see what could be wrong in this code. Rest all info is fine only issue is with infowindow not coming up. <!DOCTYPE html> <html> <head> <meta http-equiv="content-type" content="text/html; charset=UTF-8" /> <title>Google Maps Multiple Markers</title> <script src="http://maps.google.com/maps/api/js?sensor=false" type="text/javascript"></script> </head> <body> <div id="map" style="height: 800px;"></div> <script type="text/javascript"> var locations = [ ['Bondi Beach', '850 Bay st 04 Toronto, Ont'], ['Coogee Beach', '932 Bay Street, Toronto, ON M5S 1B1'], ['Cronulla Beach', '61 Town Centre Court, Toronto, ON M1P'], ['Manly Beach', '832 Bay Street, Toronto, ON M5S 1B1'], ['Maroubra Beach', '606 New Toronto Street, Toronto, ON M8V 2E8'] ]; var map = new google.maps.Map(document.getElementById('map'), { zoom: 10, center: new google.maps.LatLng(43.253205,-80.480347), mapTypeId: google.maps.MapTypeId.ROADMAP }); var infowindow = new google.maps.InfoWindow(); var geocoder = new google.maps.Geocoder(); var marker, i; for (i = 0; i < locations.length; i++) { geocoder.geocode( { 'address': locations[i][1]}, function(results, status) { //alert(status); if (status == google.maps.GeocoderStatus.OK) { //alert(results[0].geometry.location); map.setCenter(results[0].geometry.location); marker = new google.maps.Marker({ position: results[0].geometry.location, map: map }); google.maps.event.addListener(marker, 'mouseover', function() { infowindow.open(marker, map);}); google.maps.event.addListener(marker, 'mouseout', function() { infowindow.close();}); } else { alert("some problem in geocode" + status); } }); } </script> </body> </html>

  Read the article

• Realtime MySQL search results on an advanced search page

  - by Andrew Heath

  I'm a hobbyist, and started learning PHP last September solely to build a hobby website that I had always wished and dreamed another more competent person might make. I enjoy programming, but I have little free time and enjoy a wide range of other interests and activities. I feel learning PHP alone can probably allow me to create 98% of the desired features for my site, but that last 2% is awfully appealing: The most powerful tool of the site is an advanced search page that picks through a 1000+ record game scenario database. Users can data-mine to tremendous depths - this advanced page has upwards of 50 different potential variables. It's designed to allow the hardcore user to search on almost any possible combination of data in our database and it works well. Those who aren't interested in wading through the sea of options may use the Basic Search, which is comprised of the most popular parts of the Advanced search. Because the advanced search is so comprehensive, and because the database is rather small (less than 1,200 potential hits maximum), with each variable you choose to include the likelihood of getting any qualifying results at all drops dramatically. In my fantasy land where I can wield AJAX as if it were Excalibur, my users would have a realtime Total Results counter in the corner of their screen as they used this page, which would automatically update its query structure and report how many results will be displayed with the addition of each variable. In this way it would be effortless to know just how many variables are enough, and when you've gone and added one that zeroes out the results set. A somewhat similar implementation, at least visually, would be the Subtotal sidebar when building a new custom computer on IBuyPower.com For those of you actually still reading this, my question is really rather simple: Given the time & ability constraints outlined above, would I be able to learn just enough AJAX (or whatever) needed to pull this one feature off without too much trouble? would I be able to more or less drop-in a pre-written code snippet and tweak to fit? or should I consider opening my code up to a trusted & capable individual in the future for this implementation? (assuming I can find one...) Thank you.

  Read the article

• IE7 and IE8: Float clearing without adding empty elements

  - by tk-421

  Hello, I'm having a problem similar to the one described here (without a resolution): http://stackoverflow.com/questions/2467745/ie7-float-and-clear-on-the-same-element The following HTML renders as intended in Firefox but not in (both) IE7 and IE8: <html> <head> <style> ul { list-style-type: none; } li { clear: both; padding: 5px; } .left { clear: left; float: left; } .middle { clear: none; float: left; } .right { clear: right; float: left; } </style> </head> <body> <ul> <li>1</li> <li class="left">2</li> <li class="right">3</li> <li class="left">4</li> <li class="middle">5</li> <li class="right">6</li> <li>7</li> </ul> </body> </html> This is a form layout, and in Firefox the results appear like: 1 2 3 4 5 6 7 That's what I'm going for. In IE7 and IE8 however, the results are: 1 2 3 5 6 4 7 [Note: I don't want to float anything to the right because I want the fields on my form to left-align correctly, without a giant space in-between the floated fields to account for the parent container's width.] Apparently I need a full clear, and can probably add an empty list-item element to the list to force clearing, but that seems like a dumb solution and sort of defeats the purpose. Any ideas? I've spent a few hours reading and trying different options without success.

  Read the article

• How to upload a file into database by using Servlet?

  - by user1765496

  Hi all iam working on servlets, so i need to upload a file by using servlet as follows my code. package com.limrasoft.image.servlets; import java.io.*; import javax.servlet.*; import javax.servlet.http.*; import javax.servlet.annotation.*; import java.sql.*; @WebServlet(name="serv1",value="/s1") public class Account extends HttpServlet{ public void doPost(HttpServletRequest req,HttpServletResponse res)throws ServletException,IOException{ try{ Class.forName("oracle.jdbc.driver.OracleDriver"); Connecection con=null; try{ con=DriverManager.getConnection("jdbc:oracle:thin:@localhost:1521:xe","system","sajid"); PrintWriter pw=res.getWriter(); res.setContentType("text/html"); String s1=req.getParameter("un"); string s2=req.getParameter("pwd"); String s3=req.getParameter("g"); String s4=req.getParameter("uf"); PreparedStatement ps=con.prepareStatement("insert into account(?,?,?,?)"); ps.setString(1,s1); ps.setString(2,s2); ps.setString(3,s3); File file=new File("+s4+"); FileInputStream fis=new FileInputStream(fis); int len=(int)file.length(); ps.setBinaryStream(4,fis,len); int c=ps.executeUpdate(); if(c==0){pw.println("<h1>Registratin fail");} else{pw.println("<h1>Registration fail");} } finally{if(con!=null)con.close();} } catch(ClassNotFoundException ce){pw.println("<h1>Registration Fail");} catch(SQLException se){pw.println("<h1>Registration Fail");} pw.flush(); pw.close(); } } I have written the above code for file upload into database, but it giving error as "HTTP Status 500 - Servlet3.java (The system cannot find the file specified)" Could you plz help me to do this code,thanks in advanse.

  Read the article

• No more memory available in Mathematica, Fit the parameters of system of differential equation

  - by user1058051

  I encountered a memory problem in Mathematica, when I tried to process my experimental data. It's a system of two differential equations and I need to find most suitable parameters. Unfortunately I am not a Pro in Mathematica, so the program used a lot of memory, when the parameter epsilon is more than 0.4. When it less than 0.4, the program work properly. The command 'historylength = 0' and attempts to reduce the Accuracy Goal and WorkingPrecision didn`t help. I can't use ' clear Cache ', because there isnt a circle. I'm trying to understand what mistakes I made, and how I may limit the memory usage. I have already bought extra-RAM, now its 4GB, and now I haven't free memory-slots in motherboard Remove["Global`*"]; T=13200; L = 0.085; e = 0.41; v = 0.000557197; q = 0.1618; C0 = 0.0256; R = 0.00075; data = {{L,600,0.141124587},{L,1200,0.254134509},{L,1800,0.342888644}, {L,2400,0.424476295},{L,3600,0.562844542},{L,4800,0.657111356}, {L,6000,0.75137817},{L,7200,0.815876516},{L,8430,0.879823594}, {L,9000,0.900771775},{L,13200,1}}; model[(De_)?NumberQ, (Kf_)?NumberQ, (Y_)?NumberQ] := model[De, Kf, Y] = yeld /.Last[Last[ NDSolve[{ v (Ci^(1,0))[z,t]+(Ci^(0,1))[z,t]== -((3 (1-e) Kf (Ci[z,t]-C0))/ (R e (1-(R Kf (1-R/r[z,t]))/De))), (r^(0,1))[z,t]== (R^2 Kf (Ci[z,t]-C0))/ (q r[z,t]^2 (1-(R Kf (1-R/r[z,t]))/De)), (yeld^(0,1))[z,t]== Y*(v e Ci[z,t])/(L q (1-e)), r[z,0]==R, Ci[z,0]==0, Ci[0,t]==0, yeld[z,0]==0}, {r[z,t],Ci[z,t],yeld},{z,0,L},{t,0,T}]]] fit = FindFit[data, {model[De, Kf, Y][z, t], {Y > 0.97, Y < 1.03, Kf > 10^-6, Kf < 10^-4, De > 10^-13, De < 10^-9}}, {{De,7*10^-13}, {Kf, 10^-5}, {Y, 1}}, {z, t}, Method -> NMinimize] data = {{600,0.141124587},{1200,0.254134509},{1800,0.342888644}, {2400,0.424476295},{3600,0.562844542},{4800,0.657111356}, {6000,0.75137817},{7200,0.815876516},{8430,0.879823594}, {9000,0.900771775},{13200,1}}; YYY = model[ De /. fit[[1]], Kf /. fit[[2]], Y /. fit[[3]]]; Show[Plot[Evaluate[YYY[L,t]],{t,0,T},PlotRange->All], ListPlot[data,PlotStyle->Directive[PointSize[Medium],Red]]] the link on the .nb file http://www.4shared.com/folder/249TSjlz/_online.html

  Read the article

• JAVA: Can't get context parameters in Filter

  - by DaTval

  Hello, I have a filter and parameters in web.xml web.xml is like this: <filter> <description> </description> <display-name>AllClassFilter</display-name> <filter-name>AllClassFilter</filter-name> <filter-class>com.datval.homework.AllClassFilter</filter-class> <init-param> <param-name>DB_URL</param-name> <param-value>jdbc:derby:C:/Users/admin/workspace/homework03/homework/databases/StudentsDB;create=true</param-value> </init-param> <init-param> <param-name>DB_DIALECT</param-name> <param-value>org.hibernate.dialect.DerbyDialect</param-value> </init-param> <init-param> <param-name>DB_DRIVER</param-name> <param-value>org.apache.derby.jdbc.EmbeddedDriver</param-value> </init-param> </filter> mapping is working well. But I can't get this parameters in my filter. public void init(FilterConfig config) throws ServletException { // TODO Auto-generated method stub debugMessage = config.getInitParameter("debugMessage"); ctx = config.getServletContext(); } public void doFilter(ServletRequest request, ServletResponse response, FilterChain chain) throws IOException, ServletException { // TODO Auto-generated method stub // place your code here ctx.log("Start - " + debugMessage); String myDbUrl = ctx.getInitParameter("DB_URL"); String DB_DIALECT = ctx.getInitParameter("DB_DIALECT"); String DB_DRIVER = ctx.getInitParameter("DB_DRIVER"); Map<String,String> pr = new HashMap<String,String>(); pr.put("hibernate.connection.url", myDbUrl); pr.put("hibernate.dialect", DB_DIALECT); pr.put("hibernate.connection.driver_class", DB_DRIVER); EntityManagerFactory emf = Persistence.createEntityManagerFactory("students",pr); EntityManager em = emf.createEntityManager(); request.setAttribute("em", em); chain.doFilter(request, response); em.close(); ctx.log("end - " + debugMessage); } I have checked and myDbUrl is null. What I'm doing wrong? Any idea? Sorry about code, I will change it later :)

  Read the article

< Previous Page | 2207 2208 2209 2210 2211 2212 2213 2214 2215 2216 2217 2218  | Next Page >