Search Results

Search found 6992 results on 280 pages for 'engineered systems'.

Page 222/280 | < Previous Page | 218 219 220 221 222 223 224 225 226 227 228 229  | Next Page >

  • Cannot find network path for computer in workgroup of home Windows XP PCs

    - by John Galt
    VMWare Workstation 6.5 is running as an app on a Windows Vista 64bit PC host. Thanks to Workstation we have 2 guest machines running: TerriVM and MattVM (both of these run Windows XP SP2). We are attempting to get virtual networking configured so we can access the files of both of these VM guest systems from other real PCs connected to this home network. We think we are close but we can't quite get it right... Here is what we've done so far: * On VM Workstation, we set "Host Virtual Network Mapping" to use VMnet0 with the setting "Bridge to an automatically chosen adapter". * On each VM guest (i.e. using Windows explorer on XP), we rightmouse on the C disk, click "Sharing" tab, set shareName to "C_Disk" and check both boxes labeled "Share this folder on the network" and "Allow network users to change my files". Symptoms: On "JohnsRealXP" PC, we go to Windows Explorer, My Computer, Map Network Drive, type into Folder textbox: \TerriVM\C_Disk and assign drive letter T. We see all the folders on this shared drive and can open files on them. So that is good. On same "JohnsRealXP" PC, we go to Windows Explorer, My Computer, Map Network Drive, type into Folder textbox: \MattVM\C_Disk and assign drive letter M. We get a message box "_The network path \mattvm\C_Disk could not be found_". Alternatively, we type just \mattvm\ into the Folder box and click "Browse" and get a dialog box where we drill down from "Entire Network" to "Microsoft Windows Network" to "Workgroup" where both TerriVM and MattVM are listed as computers on the network. Clicking the + sign next to MattVM gives an hourglass and never enables the OK button and I have to cancel. In summary, I think we've attempted to share both of these virtual machines using the same techniques and connect to them in similar fashion, but one connects properly and the other machine can be seen but no shared resources on it can be accessed. Can anyone suggest something possibly overlooked or something to try? Thanks so much in advance.

    Read the article

  • How to configure IIS 7.5 to allow special chars in Url for ASP.NET 3.5?

    - by Sebastian P.R. Gingter
    I'm trying to configure my IIS 7.5 to allow specials chars in the url for ASP.NET. This is important to support wide-spread legacy url's on a new system. Sample url: http://mydomain.com/FileWith%inTheName.html This would be encoded in the url and requested as http://mydomain.com/FileWith25%inTheName.html This simply works, when creating a new web in IIS 7.5, placing a file with the percentage sign in the file name in the web root and pointing the browser to it. This does not work, however, when the web site is an ASP.NET application. ASP.NET always returns a 400.0 - Bad Request error in the WindowsAuthentication module from the StaticFile handler, when pointing to that url. It however displays the requested url correctly and also resolves correctly to the correct physical file (the information from the field 'Physical Path' from the Server error page points to the physically available file). There are hints on how to enable this, so I followed the instructions on these websites step by step: http://dirk.net/2008/06/09/ampersand-the-request-url-in-iis7/ http://adorr.net/2010/01/configure-iis-to-accept-url-with-special-characters.html The second one actually sums up the information from the first post and adds some more information about x64 systems (we're running x64) and on an additional web.config change for this. I tried all that, and still can't get this running from an asp.net web application. And yes: I rebooted after applying the registry changes. So, what do I have to do in addition to the settings described in above posts, to support the legacy url's which contain percentage characters? Additional info: Application Pool mode is integrated. Push after some days. No idea anyone?

    Read the article

  • Are there cloud network drives that let users lock files or mark them as "in use"?

    - by Brandon Craig Rhodes
    Having spent several hours reading about the features and limitations of services like DropBox and Jungle Disk and the hundreds of competitors they seem to have (as though everyone with an AWS account these days goes ahead and writes a file sharing application just for fun), I have yet to find one that would let a team of people at a small business collaborate without stepping all over each other's toes. At a small business there are often many small documents per project — estimates, contracts, project plans, budgets — and team members frequently have to open and edit them, with all sorts of problems happening if two people edit a file at once. Even if a sharing service is smart enough to keep both versions of the file created, most small-business software (like word processors, spreadsheets, estimating software, or billing systems) has no way to compare — much less to merge! — the changes in two rival versions of a file that two people edited at the same time without each other's knowledge. So, my question: are their cloud-based file sharing solutions that not only provide a virtual network drive that people can access, but that also let users lock files — even if it's not a real lock but just a flag or indicator — that could possibly prevent remote workers from both editing the same file at once? Having one person wait for another person to finish editing is a very, very small inconvenience compared to the hour or more than it can take to compare two estimates by hand until you find and resolve the rival changes. Given this fact, I am surprised that almost none of the popular file sharing solutions seem to recognize this problem and provide some solution! Does anyone know of a service that does?

    Read the article

  • tcp msl timeout implementation in linux

    - by iamrohitbanga
    The following is given in the book TCP IP Illustrated by Stevens Quiet Time Concept The 2MSL wait provides protection against delayed segments from an earlier incarnation of a connection from being interpreted as part of a new connection that uses the same local and foreign IP addresses and port numbers. But this works only if a host with connections in the 2MSL wait does not crash. What if a host with ports in the 2MSL wait crashes, reboots within MSL seconds, and immediately establishes new connections using the same local and foreign IP addresses and port numbers corresponding to the local ports that were in the 2MSL wait before the crash? In this scenario, delayed segments from the connections that existed before the crash can be misinterpreted as belonging to the new connections created after the reboot. This can happen regardless of how the initial sequence number is chosen after the reboot. To protect against this scenario, RFC 793 states that TCP should not create any connections for MSL seconds after rebooting. This is called the quiet time Few implementations abide by this since most hosts take longer than MSL seconds to reboot after a crash. Do operating systems wait for 2MSL seconds now after a reboot before initiating a TCP connection. The boot times are also less these days. Although the ports and sequence numbers are random but is this wait implemented in Linux? Also RFC 793 says that this wait is not required if history is maintained. Does linux maintain any history of used sequence numbers for connections to handle this case?

    Read the article

  • Home media storage solution

    - by Dan
    I record lots of personal HD film footage and am looking for a cheap way to store all of this. I take ~120 GB of footage each month, so something expandable would be nice... something that might be able to hold 6+ SATA drives. There is a low load requirement, as there is never more than a user or two... but it should be able to keep up with streaming 2 simultanious HD videos. I don't really want to spend more than $200-$300 on top of the $900 I am thinking of spending for 6X2GB SATA drives@ $150 apiece, but I am willing to pay extra for a quality solution. Should I get a cheap NAS server? a cheap multi-drive external enclosure? should I just get some used systems off craigslist? If it is an independent system I'll probably just throw ubuntu on it since I can maintain that well. Its easy to do a software raid from ubuntu too, if I choose to go that way. Thanks

    Read the article

  • How to choose the most optimal RAID settings on PE2950

    - by javano
    I have some Dell PowerEdge 2950's with 4x 15k, 150GB Cheetah SAS drives in them. They are going to be VM hosts, CentOS running ESXi with Windows Server 2k8 guests. Some guests will be hosting IIS servers, and others MSSQL servers. I am trying to set the RAID virtual disks settings and can't decide which is more optimal given this situation; Read Policy: Out of Read-Ahead, No-Read-Ahead and Adaptive Read-Ahead, the default is Read-Ahead. I will be making large sequential writes initially, writing out blank images for virtual machine hard drives (lets say 30GBs from /dev/zero for example) so Read-Ahead seems good at first. But within the virtual machines reads could be random from anywhere within their file systems as they are IIS and MSSQL servers, so perhaps No-Read-Ahead is a better idea? Now I think Adaptive Read-Ahead would be better then as a compromise but I don't know much about this option, how does it compare in performance to the others? Write Policy: write-back caching, write-through caching, the default is write-back caching. The default of write-back caching is safer than write-through caching but at a performance expense. My thinking here is that in the event of power loss for example, it seems more likely in my head (this is why I need some clarification!) that damage will occur to a guest VM with write-back caching enabled, so I should favour write-through? I have searched around and there is obviously no definitive answer, so I would like to find out what is best for my situation.

    Read the article

  • Using modem for sending voice recording

    - by ircmaxell
    I've got an interesting one for you. I've been going over my server monitoring and notification systems (Nagios based), and realized that if our internet connection goes down, there's no way for it to notify me. I already have a modem listening (Via CentOS 5) on a spare POTS line so that I can dial-in in case our internet goes down. I was wondering if I could come up with a script (Shell, Python, etc) that can dial out and play a recorded message (wave file I'm guessing) when it's picked up. I know Windows supports voice calls over a voice modem, I was wondering if a solution existed for Linux... I know asterisk can probably do it, but isn't that overkill (A full blown VOIP system just for a notification mechanism that will hopefully never be used)? And wouldn't it interfere with the modem's primary function as a backup network interface (PPP spawned via mgetty)? I've done some searching, and haven't really come up with much. I know how to dial out from the command line, but only as a modem (not as voice). Worst case, I could set it up to dial out as a modem, and then just realize that if I get a call with modem sounds from that number that it's the notification... Any insight would be appreciated...

    Read the article

  • How would I force Debian to use the physical sector size on a hard disk?

    - by Confused User
    I just purchased a few new 3TB WD drives. These have physical 4k sectors, but there is some sort of layer which is providing 512B logical sectors (see the partition table below). In order to attempt to get some more speed out of my hard drives, I would like to get rid of this logical layer and actually use the physical 4k sectors. However, I can't figure out how to do this (or even if it's possible) from the man pages of fdisk and parted, or from searching Google. Does anybody know how this could be done? As to why this is relevant, this page demonstrates that meerly aligning the sectors properly can already make up to a 25% speed difference for reads, and more than 2500% for writes in some cases! Getting rid of the logical sectors in favor of the physicals ones should improve speeds even more. Thanks! $ parted /dev/sdc GNU Parted 2.3 Using /dev/sdc Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) print Model: ATA WDC WD30EZRX-00M (scsi) Disk /dev/sdc: 3001GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 3001GB 3001GB zfs 9 3001GB 3001GB 8389kB P.S. I don't care about the data on the drives, I was just playing with different file systems. Also, this is my first time posting here, so please let me know if my posts should be formatted differently, etc.

    Read the article

  • Access keystore on Sun ONE Webserver 6.1 for 2048 bit key length SSL

    - by George Bailey
    We want to get 2048 bit key length CSR requests. The browser based GUI provides us with a 1024 bit CSR and I don't know how to change that. It seems that 1024 bit key lengths will no longer supported by SSL companies. (Lower cost options only support 2048 bit. Thawte who is much more expensive say they accept 1024 for only one or two year certificates, but not 3). The legacy systems in question are running Sun ONE Webserver 6.1. Upgrading would be time consuming and we would rather not have to do that right now. We will be phasing these out but it will take awhile, so... Got it!! http://middlewarekb.wordpress.com/2010/06/30/how-to-generate-2048-bit-keypair-using-sun-one-or-iplanet-6-1-servers/ It is for the same version webserver I am using. /opt/SUNWwbsvr/bin/https/admin/bin/certutil -R -s "CN=sub.domain.ext,OU=org unit,O=company name,L=city,ST=spelled state,C=US,E=email" -a -k rsa -g 2048 -v 12 -d /opt/SUNWwbsvr/alias -P https-sub.domain.ext-hostname- -Z SHA1 Previous efforts edited out.

    Read the article

  • Bad font anti-aliasing in Ubuntu

    - by Juliano
    I'm switching from Fedora 8 to Ubuntu 9.04, and I can't seem to get it to get a good font anti-aliasing to work. It seems that Ubuntu's fontconfig tries to keep characters in integral pixel widths. This makes text more difficult to read, when 1 pixel is too thin and 2 pixels is too thick. Check the image below. In Fedora, when fontconfig anti-aliasing is enabled, fonts have their thickness proportional to the font size. Below, the thickness is different for 8, 9 and 10pt sizes. In Ubuntu, on the other hand, even when anti-aliasing is enabled, all 8, 9 and 10pt sizes have 1 pixel thickness. This makes reading larges amount of text difficult. I'm using the very same home directory, and I already checked that X resources are the same in both systems: ~% xrdb -query | grep Xft Xft.antialias: 1 Xft.dpi: 96 Xft.hinting: 1 Xft.hintstyle: hintfull Xft.rgba: none GNOME settings: ~% gconftool-2 -a /desktop/gnome/font_rendering antialiasing = grayscale hinting = full dpi = 96 rgba_order = rgb So, the question is: What should I change in the new box (Ubuntu) in order to get anti-aliasing like in the old box (Fedora)?

    Read the article

  • Microsoft SQL Server Management Studio causing system freeze

    - by CRoshanLG
    I'm experiencing very slow response from MSSMS and it causes other applications to slow down. Specially Skype crashes after few seconds from opening MSSMS, showing an error called "Disk I/O Error". I'm regularly using few applications (Sublime text, MS Word, Firefox, Outlook, Skype and one or two other apps) simultaneously. The system works fine when MSSMS is not in use! But as soon as MSSMS is opened, all the apps start to freeze (MSSMS also responds very slow). This problem has been there for about a week now (I haven't installed any apps or haven't made any changes to the system during that time). -- System Specifications -- Processor: Core i3 (3.1 GHz) RAM: 4 GB OS: Windows 7 Professional (64 bit) Free space in C drive: ~ 100 GB MS SQL Server 2008 R2 Microsoft SQL Server Management Studio version - 10.50.1600.1 I've tried to find a reason for this but there are no helpful information in the web! There are some solutions suggested (in forums and in Skype Support pages) for the Skypes' "Disk I/O Error", all of which I tried but does not solve the problem. Has anyone faced the same senario? (and hopefully) knows a solution? Systems Log I don't have much knowledge in interpreting the System Log, but I think the Critical and Warnings are not helpful. But there are lots of Error logs which might be useful. In source Kernal-General there are few similar errors saying "An I/O operation initiated by the Registry failed unrecoverably.The Registry could not flush hive (file): <some file>" In source atapi also there are few similar errors -- "The driver detected a controller error on \Device\Ide\IdePort0." (all errors has occurred in 'IdePort0') In Application Error, there are several errors logged, and following is the latest one. Both the Errors which has occurred today is similar (to this one). As it is from Ssms.exe, I guess this is relevant to the cause of problem. But as I said above I can't understand what it means!

    Read the article

  • Event Log "Wake Source" when system wakes from sleep

    - by Doltknuckle
    So I've been troubleshooting sleep timers for our systems and have run across an interesting issue. I need a way to report how long a system was awake after a number of different inputs. Now, I've discovered that the System Log tracks wake and sleep events and even tells you the times that everything happens at. The thing is doesn't tell you is what triggered the wake event. It does give you a numerical code however. Here are some examples of what I am finding. Index : 2901 EntryType : Information InstanceId : 1 Message : The system has resumed from sleep. Sleep Time: 2010-10-01T23:20:06.097488100Z Wake Time: 2010-10-03T17:41:12.796400500Z Wake Source: 0 Category : (0) CategoryNumber : 0 Source : Microsoft-Windows-Power-Troubleshooter -- Index : 2841 EntryType : Information InstanceId : 1 Message : The system has resumed from sleep. Sleep Time: 2010-10-01T19:19:37.239789600Z Wake Time: 2010-10-01T21:28:48.921200800Z Wake Source: 4HID Keyboard Device Category : (0) CategoryNumber : 0 Source : Microsoft-Windows-Power-Troubleshooter So here's my question: Does anyone know what the different numerical codes for the "Wake Source" mean? I think "0" is a magic packet and "4" is a USB device. Does anyone have any idea if there is any documentation out there on this for Windows 7? Thanks in advance

    Read the article

  • Using OSX home directories from linux

    - by Steffen
    I'm running an OSX (Snow Leopard) Server with OpenDirectory, which is nothing else than a modified OpenLDAP with some Apple-specific schemas. However, I want to reuse this directory on some of my Linux (Debian Squeeze) boxes. It's no problem to authenticate against OSXs LDAP Server, this works fine already. What I struggle with is the way the home folders are specified in OSX. If I query the passwd config on one of my linux machines, the OSX imported entries are looking like this myaccount:x:1034:1026:Firstname Lastname:/Network/Servers/hostname.example.com/Volumes/MyShare/Users/myaccount:/bin/bash While those network home folders might be fine for OSX-Clients, I don't want those server based paths on my linux machines. I saw that there is an NFSHomeDirectory Attribute in the OSX User inspector, but if I change this the whole user home path gets changed. Since my users should be able to login on both systems, OSX and Linux, this is not what I want. Does anyone have an idea how I must configure OSX to make my linux machines use home folders like /net/myaccount and leave the configuration for OSX clients untouched?

    Read the article

  • Linux - real-world hardware RAID controller tuning (scsi and cciss)

    - by ewwhite
    Most of the Linux systems I manage feature hardware RAID controllers (mostly HP Smart Array). They're all running RHEL or CentOS. I'm looking for real-world tunables to help optimize performance for setups that incorporate hardware RAID controllers with SAS disks (Smart Array, Perc, LSI, etc.) and battery-backed or flash-backed cache. Assume RAID 1+0 and multiple spindles (4+ disks). I spend a considerable amount of time tuning Linux network settings for low-latency and financial trading applications. But many of those options are well-documented (changing send/receive buffers, modifying TCP window settings, etc.). What are engineers doing on the storage side? Historically, I've made changes to the I/O scheduling elevator, recently opting for the deadline and noop schedulers to improve performance within my applications. As RHEL versions have progressed, I've also noticed that the compiled-in defaults for SCSI and CCISS block devices have changed as well. This has had an impact on the recommended storage subsystem settings over time. However, it's been awhile since I've seen any clear recommendations. And I know that the OS defaults aren't optimal. For example, it seems that the default read-ahead buffer of 128kb is extremely small for a deployment on server-class hardware. The following articles explore the performance impact of changing read-ahead cache and nr_requests values on the block queues. http://zackreed.me/articles/54-hp-smart-array-p410-controller-tuning http://www.overclock.net/t/515068/tuning-a-hp-smart-array-p400-with-linux-why-tuning-really-matters http://yoshinorimatsunobu.blogspot.com/2009/04/linux-io-scheduler-queue-size-and.html For example, these are suggested changes for an HP Smart Array RAID controller: echo "noop" > /sys/block/cciss\!c0d0/queue/scheduler blockdev --setra 65536 /dev/cciss/c0d0 echo 512 > /sys/block/cciss\!c0d0/queue/nr_requests echo 2048 > /sys/block/cciss\!c0d0/queue/read_ahead_kb What else can be reliably tuned to improve storage performance? I'm specifically looking for sysctl and sysfs options in production scenarios.

    Read the article

  • Is there a way in Windows 7 to disable "journaling"?

    - by Psycogeek
    C:\$extend\$Usn.Jrnl:$J:$data Here is a picture finally. The large strip in the center of the top band is the largest chunk, in the other, grey areas are the various clusters with it. On the right, the big long grey line is $logfile (not paging), and it is 63&nbsb;MB. Paging, 500&nbsb;MB is the dark cyan chunk, next to the yellow MFTres in the inner rings.. The disk was defragged so they could be seen easier. Not all clusters of this type of file are tagged, but the idea is there. The disk is 4k clusters, now about 12 GB size. Each cute little block in the picture is .81 MB and represents 207 clusters. The dkGreen section, is mostly the whole Winsxs pile, also interesting when they keep telling us it doesn't take much disk space. Wikipedia suggests that in previous NT systems "USN journaling" would be turned on when enabled (assumes it could also be turned off?). What aspects, services, or program is working on putting that stuff all over the disk which is known by $jrnl$ type clusters, even if it is not actual USN journaling? Is it possible in a Windows 7 system to completly disable the journaling, and what would be the ramifications of that? On a Windows XP NTFS system, I do not recall seeing the quantity of disk clusters used with these $jrnl$ names, so I do not recall this being necessary in this quantity for an NTFS file system itself? I understand that it would not be there, if it did not have a useful function :-) Information about how wonderful is fine, if that information will help track down what parts of the system create and use it. Change Journals states: Change journals are also needed to recover file system indexing Hmm, that might explain some of them, or why it was left on the disk. A crash while background indexing?

    Read the article

  • What is the best way/Software to manage multiple short lived instances of virtual machines ?

    - by Newtopian
    Hi, We have a QA department that have to test our software on multiple combination of OS and DMBS. With Windows spewing out many different versions the combinatorial math of all this can be daunting. So we decided on visualizing our setups but so far it only displaces the problem. The cost of hardware is expensive and we need many different combination far exceeding your server capacity to deliver. Also, these instances are throw away, once the test is complete we no longer need it, furthermore to ensure proper test isolation we should start fresh from a new instance. Lastly we only need a small subset of these system online at any given time. What I am looking for is a way to manage inventory so that our QA staff can order instances to be put online as required and discarded once used. Instances are spawned from a pool of freshly installed systems with the appropriate combination ready to accept our software. It also should be possible for two or more people to start the same instance at the same time, though we could manage without this if it proves too complex to put in place. Finally our budget is pretty thin, we can probably make some purchases but ideally expenditures should be kept to a minimum. To summarize we should be able to : Bring instances online on demand. Ideally should offer queue and scheduling management Destroy instances on demand Keep masters in inventory but not online. Manage large inventory of VMs (30-100 maybe more) with small staff of users (5-10). Allow adding, deleting and changing instances from inventory (bring online, make changes and check back in, or create new and check in). Allow few long lived instances for support tools (normal VM server usage) Thanks for your answers

    Read the article

  • Wastage of resources in Virtualization

    - by Sabeen Malik
    I have asked this question on SO, but was suggested that i ask it here on SF, so here it goes. http://stackoverflow.com/questions/3010753/wastage-of-resources-in-virtualization I am not sure if this is the right place to ask the question. However i hope it is. When looking for a VPS earlier today, I was trying to understand how each container would work in the background. Keeping in mind the fact that the operating system uses most of the memory and power on a system, wouldn't having multiple operating systems in the same machine mean more wastage of resources. For instance if i was running centOS on a dedicated box and it was running lets say 20 background OS level processes. Then i go and install a virtualization platform and install 5 more centOS virtual machines in the same system which are exactly the same as the host operating system. Doesn't this mean duplication of those 20 processes 6 times? So internally the context switching is happening between 120 processes instead of 20? Further Notes: Here is an example of what i am thinking: I have a master-slave configuration for a long running, cpu + memory intensive process, which can be distributed to 4 machines. Lets say when the process runs on these 4 machines with lets say 1 Gh CPU and 1 Gig RAM, i get 400 results per hour from the cluster (assuming 100 results from one machine) . Now i get a bigger machine ( lets say 4Gh and 4 Gig RAM), have 4 virtual hosts on it with 1 Gz CPU and 1 Gig RAM. Will this configuration give me the same 4 results per hour from these 4 virtual hosts?

    Read the article

  • How to cache authentication in Linux using PAM/Kerberos authentication (for CVS)?

    - by Calonthar
    We have several Linux servers that authenticate Linux user passwords on our Windows Active Directory Server using PAM and Kerberos 5. The Linux distro we use is CentOS 6. On one system, we have several Version Control Systems like CVS and Subversion, both of which authenticate users throug PAM, such that users can use their normal Unix resp. Windows AD accounts. Since we started using Kerberos for password authentication, we experienced that CVS on a client machine is often much slower in establishing a connection. CVS authenticates the user on every request (eg. cvs diff, log, update...). Is is possible to cache the credentials that kerberos uses, sucht that is does not need to ask the Windows AD server every time a user executes a cvs action? Our PAM config /etc/pam.d/system-auth looks like the following: auth required pam_env.so auth sufficient pam_unix.so nullok try_first_pass auth requisite pam_succeed_if.so uid >= 500 quiet auth sufficient pam_krb5.so use_first_pass auth required pam_deny.so account required pam_unix.so broken_shadow account sufficient pam_succeed_if.so uid < 500 quiet account [default=bad success=ok user_unknown=ignore] pam_krb5.so account required pam_permit.so password requisite pam_cracklib.so try_first_pass retry=3 password sufficient pam_unix.so md5 shadow nullok try_first_pass use_authtok password sufficient pam_krb5.so use_authtok password required pam_deny.so session optional pam_keyinit.so revoke session required pam_limits.so session [success=1 default=ignore] pam_succeed_if.so service in crond quiet use_uid session required pam_unix.so session optional pam_krb5.so

    Read the article

  • How to connect a USB GDI printer to Linux over a D-Link print server?

    - by jpe
    The setup is the following: +------------+ +-----------------+ +---------+ | HP LJ P1005|--USB--| D-Link DPR-1020 |---LAN---| PC Linux| +------------+ +-----------------+ + +---------+ | +------------+ +--| PC Windows | +------------+ HP LJ P1005 is one of those GDI printers that requires the printer driver to do most of the work for it and therefore is a bit "special". D-Link DPR-1020 is a print server with an Ethernet and an USB port that actually supports printing to challenged (read GDI) printers using a utility called PS-Link. What the utility does is basically mirror a USB port over the network to the print server so that the printer driver and the printer both are happy to talk to each other. The PC-s are notebooks that come and go, i.e. are not there all the time. Is there an equivalent of the D-Link PS-Link utility for Linux that could mirror a USB port over the network for a Linux host? And can the solution be used with D-Link DPR-1020? If not then I basically wasted the money buying the print server because the goal was to share a small printer among a couple of users with diverse operating systems in an office. The print server specs say that it supports Linux and LJ P1005, but the Catch 22 appears to be the solution used for GDI printers... It should be noted that it is possible to print from Linux to LJ P1005 directly over USB. This far sharing involved reconnecting the USB cable to appropriate computer to print. Now one of the desks is separated, so the cable does not work. Searching the net did not yield anything useful. Please do not suggest solutions involving a Windows machine (either virtual or not), my question is whether a solution only involving a Linux machine exists.

    Read the article

  • BIND master/slave does not respond for queries for its slave

    - by Savas
    Systems are all Centos 6.2 Lets say I have a masterdns with IP 10.2.1.2, authoritative for the 10.2.1.X subnet and let say it is domain example.com I have another two subnets, 10.2.2.X and 10.1.2.X Each one has its own DNS server, dns2 and dns1 respectively and let say these are domains dom2.example.com and dom2.example.com respectively. The masterdns server has slave zones for dns1, dns2 and respond to requests OK. The dns1, dns2 have the masterdns zones as slaves two, and respond to requests OK. So, the masterdns has as slave zones all the subordinate domains of example.com Each of dns1 and dns2 use masterdns as a forwards (which uses another dns cache/proxy server) for dns resolution of internet public domain names. It works OK that too. The problem is, and I cannot figure it out. Why queries for example at dns1 for hostnames of dom2.example.com do not resolve? If i use nslookup - masterdns at dns1 server, resolve (i use directly the dns facility of masterdns). If I use nslookup locally, meaning queries are sent to dns1, for hosts that are at dom2.example.com, they do not resolve. Everything other works OK.

    Read the article

  • "Network Error - 53" while trying to mount NFS share in Windows Server 2008 client

    - by Mike B
    CentOS | Windows 2008 I've got a CentOS 5.5 server running nfsd. On the Windows side, I'm running Windows Server 2008 R2 Enterprise. I have the "Files Services" server role enabled and both Client for NFS and Server for NFS are on. I'm able to successfully connect/mount to the CentOS NFS share from other linux systems but am experiencing errors connecting to it from Windows. When I try to connect, I get the following: C:\Users\fooadmin>mount -o anon 10.10.10.10:/share/ z: Network Error - 53 Type 'NET HELPMSG 53' for more information. (IP and share name have been changed to protect the innocent :-) ) Additional information: I've verified low-level network connectivity between the Windows client and the NFS server with telnet (to the NFS on TCP/2049) so I know the port is open. I've further confirmed that inbound and outbound firewall ports are present and enabled. I came across a Microsoft tech note that suggested changing the "Provider Order" so "NFS Network" is above other items like Microsoft Windows Network. I changed this and restarted the NFS client - no luck. I've confirmed that the share folder on the NFS server is readable/writable by all (777) I've tried other variations of the mount command like: mount 10.10.10.10:/share/ z: and mount 10.10.10.10:/share z: and mount -o anon mtype=hard \\10.10.10.10:/share * No luck. As per the command output, I tried typing NET HELPMSG 53 but that doesn't tell me much. Just "The network path was not found". I'm lost on how to proceed with troubleshooting. Any ideas?

    Read the article

  • Using my old PC as a web/file server?

    - by Garrett
    I have an old desktop computer that I've been trying to sell for AGES. I guess nobody is looking for computers because it was advertised at a dirt cheap price on craigslist, local papers, etc. Anyways, I was wondering if it would be worth it to set it up as a home file server, a web dev server (I have a web host for actual production use), and maybe host a few server applications (ex: ventrillo). The computer is actually an old Dell that I cannibalized after the motherboard being destroyed by lightning, so it has fairly new parts in it. The specs are: P4 3.4GHz w/ HT and Artic Cooling Freezer 7 3GB DDR2 533 RAM 80GB hdd (will upgrade the hard drive if it's even worth using as a server) basic dvd rom 430 Watt Thermaltake PSU (it might be important to note that it is only 60% efficiency) ATI Radeon x600 256MB Antec 300 case It's not a really beefy machine, I just can't see giving it away or putting it in the corner to just collect dust. I have Windows Server 2008 R2 Standard and I am confident in my skills in operating most Linux operating systems. I'd also be using it to tinker with when I learn new things in my server admin classes (I'm finishing my 2nd year in college at the moment so I'm still learning) Also, my house is quite old and the electrical wiring is pretty poor (it MIGHT be up to code, then again, where I live most people don't even know what regulations are or let alone know how to spell it...) Would it be safe to leave it running all day and is it going to run up my electric bill because of the PSU efficiency? I only have 5mbit cable internet, but I won't be running very bandwidth intense services on it so it should be ok. I should elaborate on why I am concerned about the power. The circuits should be fine, but I'm more concerned about fire hazard. What is the likelihood that the server could cause an electrical fire? Again, thank you all for the feedback!

    Read the article

  • gcc built by crosstool-ng gives undefined reference

    - by netvope
    I've successfully built a toolchain using crosstool-ng with the default configuration named x86_64-unknown-linux-gnu. The documentation says: Using the toolchain is as simple as adding the toolchain's bin directory in your PATH, such as: export PATH="${PATH}:/your/toolchain/path/bin" and then using the target tuple to tell the build systems to use your toolchain: ./configure --target=your-target-tuple or make CC=your-target-tuple-gcc or make CROSS_COMPILE=your-target-tuple- and so on... I followed the instructions and attempted to build GNU tar (tar-1.25.tar.bz2) with the toolchain. The commands ./configure --target=x86_64-unknown-linux-gnu and make CROSS_COMPILE=x86_64-unknown-linux-gnu- do not work (the build will succeed, but it uses the host system's gcc). The command make CC=x86_64-unknown-linux-gnu-gcc works, but in the very last step when it tries to link, it returns errors like this: compare.o: In function `openat': /dev/shm/x-tools/x86_64-unknown-linux-gnu/x86_64-unknown-linux-gnu/sys-root/usr/include/bits/fcntl2.h:134: undefined reference to `__openat_2' What could be the problem? Was the toolchain not properly setup? Perhaps x86_64-unknown-linux-gnu-gcc is using the header files from the host system but could not find the libraries in the target's sys-root?

    Read the article

  • DKIM- Filter No Signature Data

    - by Vineet Sharma
    I have installed DKIM-Filter on Postfix after reading this tutorial http://www.unibia.com/unibianet/systems-networking/how-setup-domainkeys-identified-mail-dkim-postfix-and-ubuntu-server My email now has a DKIM signature but still it is landing in the SPAM folder. Here is the header Received-SPF: neutral (google.com: 69.164.193.167 is neither permitted nor denied by best guess record for domain of [email protected]) client-ip=69.164.193.167; Authentication-Results: mx.google.com; spf=neutral (google.com: 69.164.193.167 is neither permitted nor denied by best guess record for domain of [email protected]) [email protected]; dkim=hardfail (test mode) [email protected] Received: from promote.a2labs.in (localhost [127.0.0.1]) by promote.a2labs.in (Postfix) with ESMTPA id 34858530E8 for <[email protected]>; Mon, 28 Feb 2011 12:23:07 +0530 (IST) DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=a2labs.in; s=mail; t=1298875987; bh=bo+H1VYPIHMja2u7i1lnzr4k/j4Pe8iSf79bVw94XpI=; h=To:Subject:Message-ID:Date:From:Reply-To:MIME-Version: Content-Type:Content-Transfer-Encoding; b=nhTdlnUwo0iUJ92ycQzKSRjw 5Pfya0DJcJrAc8Mr2hIv8OLpgzBCzdOMWTGqR5nuUmAzgCGYBhYAM2XZwVxo9JG/iz7 oYKysmNQnskFx0TRyW3UOkDWcfHcPnCL6Y7fGzZWinmsyjsg47k+mKZg/e8jqlwTAMO PYKkt5pBz7SM0= Also my mail.err file shows Feb 28 12:17:03 ivineet dkim-filter[32181]: 1F788530E1: no signature data Feb 28 12:18:02 ivineet dkim-filter[32181]: 432BA530E2: no signature data How to fix it

    Read the article

  • Registry remotley hacked win 7 need help tracking the perp

    - by user577229
    I was writing some .VBS code at thhe office that would allow certain file extensions to be downloaded without a warning dialog on a w7x32 system. The system I was writing this on is in a lab on a segmented subnet. All web access is via a proxy server. The only means of accessing my machine is via the internet or from within the labs MSFT AD domain. While writing and testing my code I found a message of sorts. Upon refresing the registry to verify my code changed a dword, instead the message HELLO was written and visible in regedit where the dword value wass called for. I took a screen shot and proceeded to edit my code. This same weird behavior occurred last time I was writing registry code except on another internal server. I understand that remote registry access exists for windows systems. I will block this immediately once I return to the office. What I want to know is, can I trace who made this connection? How would I do this? I suspect the cause of this is the cause of other "odd" behaviors I'm experiencing at work such as losing control of my input director master control for over an hour and unchanged code that all of a sudden fails for no logical region. These failures occur at funny times, whenver I'm about to give a demonstration of my test code. I know this sounds crazy however knowledge of the registry component makes this believable. Once the registry can be accessed, the entire system is compromised. Any help or sanity checking is appreciated.

    Read the article

< Previous Page | 218 219 220 221 222 223 224 225 226 227 228 229  | Next Page >