Search Results

Search found 15776 results on 632 pages for 'include paths'.

Page 222/632 | < Previous Page | 218 219 220 221 222 223 224 225 226 227 228 229  | Next Page >

  • SpineJS and RequireJS

    - by ot3m3m
    I am using require.js 2.0. I have the following code that is called initially by require: app.js requirejs.config({ paths: { app: '..', spine: 'spine_src/spine', cs: "cs", }, shim: { 'spine_src/route': { deps: ['spine'] } } }); // Start the main app logic. requirejs(['cs!app/StartApp_Admin', 'spine','spine_src/route'], function (StartApp_Admin, Spine, Route) { { new StartApp_Admin(); } }); And the following controller: StartApp_Admin define () -> class StartApp_Admin extends Spine.Controller constructor: -> @routes "/twitter/:id": (params) -> console.log("/users/", params.id) Spine.Route.setup() When I execute the application I get the following error in my spine route library file (route.js). The application breaks when I call Spine.Route.setup() Uncaught TypeError: Object function (element) {return element;} has no method 'extend' Any help would be greatly appreciated

    Read the article

  • Why doesn't gcc remove this check of a non-volatile variable?

    - by Thomas
    This question is mostly academic. I ask out of curiosity, not because this poses an actual problem for me. Consider the following incorrect C program. #include <signal.h> #include <stdio.h> static int running = 1; void handler(int u) { running = 0; } int main() { signal(SIGTERM, handler); while (running) ; printf("Bye!\n"); return 0; } This program is incorrect because the handler interrupts the program flow, so running can be modified at any time and should therefore be declared volatile. But let's say the programmer forgot that. gcc 4.3.3, with the -O3 flag, compiles the loop body (after one initial check of the running flag) down to the infinite loop .L7: jmp .L7 which was to be expected. Now we put something trivial inside the while loop, like: while (running) putchar('.'); And suddenly, gcc does not optimize the loop condition anymore! The loop body's assembly now looks like this (again at -O3): .L7: movq stdout(%rip), %rsi movl $46, %edi call _IO_putc movl running(%rip), %eax testl %eax, %eax jne .L7 We see that running is re-loaded from memory each time through the loop; it is not even cached in a register. Apparently gcc now thinks that the value of running could have changed. So why does gcc suddenly decide that it needs to re-check the value of running in this case?

    Read the article

  • Self-type mismatch in Scala

    - by Alexey Romanov
    Given this: abstract class ViewPresenterPair { type V <: View type P <: Presenter trait View {self: V => val presenter: P } trait Presenter {self: P => var view: V } } I am trying to define an implementation in this way: case class SensorViewPresenter[T] extends ViewPresenterPair { type V = SensorView[T] type P = SensorPresenter[T] trait SensorView[T] extends View { } class SensorViewImpl[T](val presenter: P) extends SensorView[T] { presenter.view = this } class SensorPresenter[T] extends Presenter { var view: V } } Which gives me the following errors: error: illegal inheritance; self-type SensorViewPresenter.this.SensorView[T] does not conform to SensorViewPresenter.this.View's selftype SensorViewPresenter.this.V trait SensorView[T] extends View { ^ <console>:13: error: type mismatch; found : SensorViewPresenter.this.SensorViewImpl[T] required: SensorViewPresenter.this.V presenter.view = this ^ <console>:16: error: illegal inheritance; self-type SensorViewPresenter.this.SensorPresenter[T] does not conform to SensorViewPresenter.this.Presenter's selftype SensorViewPresenter.this.P class SensorPresenter[T] extends Presenter { ^ I don't understand why. After all, V is just an alias for SensorView[T], and the paths are the same, so how can it not conform?

    Read the article

  • How to remove Modules from a Intellij Maven Project permanently?

    - by herpnderpn
    I am currently working on a larger scale Maven-based project in IntelliJIdea 12.1.6 Ultimate. I have been working with IntelliJIdea since about 5 months. An included module has dependencies on another module. The dependent module's source was also part of my project until recently. Since I removed the dependent module from my project, I get compile errors whenever I am trying to compile the source without maven. The pom.xml of removed modules in Intellij seem to be placed onto the Settings-Maven-Ignored Files. I cant seem to remove it from there, only check or uncheck it. It's not possible to include the module again since IntelliJ will say its still under Ignored Files. 2 ways allow me to compile again: Uncheck the pom from Ignored files, which will include the module again in my project. Or delete the source of the dependent project, so my project will load the dependent module from the maven repository. But whenever I update my project from svn, the source of the dependent module is restored (I don't know why this even happens since its not part my project) and the cycle begins anew. I googled this for a while since it gets really annoying. It became a problem with several excluded modules. I could rebuild the intellij-project but since a lot of IntelliJ settings were made (not related to the problem) I would rather solve this. Any help is appreciated, I guess I must be missing something

    Read the article

  • Array merging/manipulation with Velocity

    - by Razor
    Hello, I have an array set inside a velocity template that contains some paths. The idea is to put a few "default" .js/.css files that 90% of the pages will use in this array. However, the other pages will still have to be able to add/delete values from this array, in case there are no linked files at all, or I need to add some. Given this code: #set ( $head.scripts = [ "https://ajax.googleapis.com/ajax/libs/jquery/1.4.2/jquery.min.js", "https://ajax.googleapis.com/ajax/libs/jqueryui/1.8.0/jquery-ui.min.js" ] ) #foreach ($URI in $head.scripts) <script type="text/javascript" src="$URI"></script> #end is there any way to add/delete values from these defaults? I have seen this list tool, but it looks like it's not enough for what I need.

    Read the article

  • Register view_helper zf 1.10.3

    - by Alexandr
    I create my view helper it located in /library/My/View/helpers/SpecialPurpose.php the class name is My_View_Helper_SpecialPurpose it have public function specialPurpose() it return some HTML i register this path in bootstrap.php $view = Zend_Layout::getMvcInstance()-getView(); $view-addBasePath('/my/view/helpers',"My_View_Helper"); when i tring specialPurpose();? in any view .phtml it trow exeption Message: Plugin by name 'SpecialPurpose' was not found in the registry; used paths: My_View_Helper_Helper_: /my/view/helpers\helpers/ Zend_View_Helper_: Zend/View/Helper/;D:/WWW/zends/application/modules/default/views\helpers/ P.S I read many post in stackoverflow but not one solutions not helped If it possible weácan how do this task with bootstrap and application.ini zf version 1.10.3

    Read the article

  • Drupal htaccess redirect - all files in directory to new directory

    - by hfidgen
    Hiya, I've moved a site to Drupal, but am now getting a lot of 404 errors due to the search engines taking their time to update the indexes. The 404 paths all look similar to this: recipedata/ccp1300006/633_L.jpg recipedata/ccp1500005/risotto.jpg recipedata/ccp1500006/haddock.jpg So I'd like to do some htaccess redirection with mod_rewrite to take care of this lot. All the images DO exist - the path has just changed to /sites/default/files/images/ I've edited a lot of redirects into my htaccess already, but because the ccpXXXXXX directory changes I can't quite figure out the regex. This was my last attempt, but yeah - doesn't work :) Can anyone give me some pointers? RewriteRule ^recipedata/(ccp+)/(.+)$ http://domain.co.uk/sites/default/files/images/$2 [R=301,L] This has to be in the context of the Drupal mod_rewrite rules which already exist <IfModule mod_rewrite.c> RewriteEngine on # Rewrite URLs of the form 'x' to the form 'index.php?q=x'. RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_URI} !=/favicon.ico RewriteRule ^(.*)$ index.php?q=$1 [L,QSA] </IfModule> Thanks!

    Read the article

  • Using GCC (MinGW) to compile OpenGL on Windows

    - by Casey
    I've searched on google and haven't been able to come up with a solution. I would like to compile some OpenGL programming using GCC. In the GL folder in GCC I have the following headers: gl.h glext.h glu.h Then in my system32 file I have the following .dll opengl32.dll glu32.dll glut32.dll If I wanted to write a simple OpenGL "Hello World" and link and compile with GCC, what is the correct process? I'm attempting to use this code: #include <GL/gl.h> #include <GL/glut.h> void display() { glClear(GL_COLOR_BUFFER_BIT); glFlush(); } int main(int argc, char **argv) { glutInit(&argc, argv); glutInitWindowSize(512,512); glutInitDisplayMode(GLUT_SINGLE | GLUT_RGB); glutCreateWindow("The glut hello world program"); glutDisplayFunc(display); glClearColor(0.0, 0.0, 0.0, 1.0); glutMainLoop(); // Infinite event loop return 0; } Thank you in advance for the help.

    Read the article

  • Is it Me or Are Rails and Django Difficult to Install on Windows?

    - by Mackristo
    I tried getting these frameworks working on Windows Vista for a couple of days but to no avail. Every single time I thought I had them working I would get some random error involving the PostgreSQL or MySQL setup, or the paths were screwed up or some other command line error "not recognized as an internal or external command" (or something). Someone told me that these frameworks are a lot easier to get running on Ubuntu but I really don't want to make that switch as everything I have is on Windows. Are these common problems when trying to get running on Windows? I think I'll just stick with C# and .NET as everything seems to work pretty nicely together with none of this "install-twenty-different-components" stuff and see if they work together. Is Instant Django advisable to use?

    Read the article

  • Check malicious Redirect URL in ASP.NET

    - by acidzombie24
    I heard of sites using other site to redirect users either to their own site or to hide behind another site. In my code i redirect in a few places such as post a comment (its easier to use a return url then figure out the page using data given). How do i check if the return URL is my own url? I think i use absolute paths so i can easily check if the first character is '/' but then i will lose relative flexibility. This also disallows me from doing http://mysite.com/blah in the redirect url. I could patch the url by adding mysite + string but i'll need to figure out if string is a relative url or already a mysite.com url. Whats the easiest way to ensure i am only redirecting to my site?

    Read the article

  • Problems compiliing c++ code using cygwin

    - by user343403
    I am trying to compile some source code in cygwin (in windows 7) and get the following error when I run the make file g++ -DHAVE_CONFIG_H -I. -I.. -I.. -Wall -Wextra -Werror -g -O2 -MT libcommon_a Fcntl.o -MD -MP -MF .deps/libcommon_a-Fcntl.Tpo -c -o libcommon_a-Fcntl.o `test -f 'Fcntl.cpp' || echo './'`Fcntl.cpp Fcntl.cpp: In function int setCloexec(int): Fcntl.cpp:8: error: 'F_GETFD' was not declared in this scope Fcntl.cpp:8: error: 'fcntl' was not declared in this scope Fcntl.cpp:11: error: 'FD_CLOEXEC' was not declared in this scope Fcntl.cpp:12: error: 'F_SETFD' was not declared in this scope make[4]: *** [libcommon_a-Fcntl.o] Error 1 make[4]: Leaving directory `/abyss-1.1.2/Common' make[3]: *** [all-recursive] Error 1 make[3]: Leaving directory `/abyss-1.1.2' make[2]: *** [all] Error 2 make[2]: Leaving directory `/abyss-1.1.2' make[1]: *** [.build-conf] Error 2 make[1]: Leaving directory `/cygdrive/c/Users/Martin/Documents/NetBeansProjects/abyss-1.1.2_1' make: *** [.build-impl] Error 2 The problem file is:- #include "Fcntl.h" #include <fcntl.h> /* Set the FD_CLOEXEC flag of the specified file descriptor. */ int setCloexec(int fd) { int flags = fcntl(fd, F_GETFD, 0); if (flags == -1) return -1; flags |= FD_CLOEXEC; return fcntl(fd, F_SETFD, flags); } I don't understand what is going on, the file fcntl.h is available and the varaiables that it says were not declared in this scope do not give an error when I compile the file on its own Any help would be much appreciated Many Thanks

    Read the article

  • What is difference between my atoi() calls?

    - by Lucas
    I have a big number stored in a string and try to extract a single digit. But what are the differences between those calls? #include <iostream> #include <string> int main(){ std::string bigNumber = "93485720394857230"; char tmp = bigNumber.at(5); int digit = atoi(&tmp); int digit2 = atoi(&bigNumber.at(5)) int digit3 = atoi(&bigNumber.at(12)); std::cout << "digit: " << digit << std::endl; std::cout << "digit2: " << digit2 << std::endl; std::cout << "digit3: " << digit3 << std::endl; } This will produce the following output. digit: 7 digit2: 2147483647 digit3: 57230 The first one is the desired result. The second one seems to me to be a random number, which I cannot find in the string. The third one is the end of the string, but not just a single digit as I expected, but up from the 12th index to the end of the string. Can somebody explain the different outputs to me? EDIT: Would this be an acceptable solution? char tmp[2] = {bigNumber.at(5), '\0'}; int digit = atoi(tmp); std::cout << "digit: " << digit << std::endl;

    Read the article

  • undefined reference to function, despite giving reference in c

    - by Jamie Edwards
    I'm following a tutorial, but when it comes to compiling and linking the code I get the following error: /tmp/cc8gRrVZ.o: In function `main': main.c:(.text+0xa): undefined reference to `monitor_clear' main.c:(.text+0x16): undefined reference to `monitor_write' collect2: ld returned 1 exit status make: *** [obj/main.o] Error 1 What that is telling me is that I haven't defined both 'monitor_clear' and 'monitor_write'. But I have, in both the header and source files. They are as follows: monitor.c: // monitor.c -- Defines functions for writing to the monitor. // heavily based on Bran's kernel development tutorials, // but rewritten for JamesM's kernel tutorials. #include "monitor.h" // The VGA framebuffer starts at 0xB8000. u16int *video_memory = (u16int *)0xB8000; // Stores the cursor position. u8int cursor_x = 0; u8int cursor_y = 0; // Updates the hardware cursor. static void move_cursor() { // The screen is 80 characters wide... u16int cursorLocation = cursor_y * 80 + cursor_x; outb(0x3D4, 14); // Tell the VGA board we are setting the high cursor byte. outb(0x3D5, cursorLocation >> 8); // Send the high cursor byte. outb(0x3D4, 15); // Tell the VGA board we are setting the low cursor byte. outb(0x3D5, cursorLocation); // Send the low cursor byte. } // Scrolls the text on the screen up by one line. static void scroll() { // Get a space character with the default colour attributes. u8int attributeByte = (0 /*black*/ << 4) | (15 /*white*/ & 0x0F); u16int blank = 0x20 /* space */ | (attributeByte << 8); // Row 25 is the end, this means we need to scroll up if(cursor_y >= 25) { // Move the current text chunk that makes up the screen // back in the buffer by a line int i; for (i = 0*80; i < 24*80; i++) { video_memory[i] = video_memory[i+80]; } // The last line should now be blank. Do this by writing // 80 spaces to it. for (i = 24*80; i < 25*80; i++) { video_memory[i] = blank; } // The cursor should now be on the last line. cursor_y = 24; } } // Writes a single character out to the screen. void monitor_put(char c) { // The background colour is black (0), the foreground is white (15). u8int backColour = 0; u8int foreColour = 15; // The attribute byte is made up of two nibbles - the lower being the // foreground colour, and the upper the background colour. u8int attributeByte = (backColour << 4) | (foreColour & 0x0F); // The attribute byte is the top 8 bits of the word we have to send to the // VGA board. u16int attribute = attributeByte << 8; u16int *location; // Handle a backspace, by moving the cursor back one space if (c == 0x08 && cursor_x) { cursor_x--; } // Handle a tab by increasing the cursor's X, but only to a point // where it is divisible by 8. else if (c == 0x09) { cursor_x = (cursor_x+8) & ~(8-1); } // Handle carriage return else if (c == '\r') { cursor_x = 0; } // Handle newline by moving cursor back to left and increasing the row else if (c == '\n') { cursor_x = 0; cursor_y++; } // Handle any other printable character. else if(c >= ' ') { location = video_memory + (cursor_y*80 + cursor_x); *location = c | attribute; cursor_x++; } // Check if we need to insert a new line because we have reached the end // of the screen. if (cursor_x >= 80) { cursor_x = 0; cursor_y ++; } // Scroll the screen if needed. scroll(); // Move the hardware cursor. move_cursor(); } // Clears the screen, by copying lots of spaces to the framebuffer. void monitor_clear() { // Make an attribute byte for the default colours u8int attributeByte = (0 /*black*/ << 4) | (15 /*white*/ & 0x0F); u16int blank = 0x20 /* space */ | (attributeByte << 8); int i; for (i = 0; i < 80*25; i++) { video_memory[i] = blank; } // Move the hardware cursor back to the start. cursor_x = 0; cursor_y = 0; move_cursor(); } // Outputs a null-terminated ASCII string to the monitor. void monitor_write(char *c) { int i = 0; while (c[i]) { monitor_put(c[i++]); } } void monitor_write_hex(u32int n) { s32int tmp; monitor_write("0x"); char noZeroes = 1; int i; for (i = 28; i > 0; i -= 4) { tmp = (n >> i) & 0xF; if (tmp == 0 && noZeroes != 0) { continue; } if (tmp >= 0xA) { noZeroes = 0; monitor_put (tmp-0xA+'a' ); } else { noZeroes = 0; monitor_put( tmp+'0' ); } } tmp = n & 0xF; if (tmp >= 0xA) { monitor_put (tmp-0xA+'a'); } else { monitor_put (tmp+'0'); } } void monitor_write_dec(u32int n) { if (n == 0) { monitor_put('0'); return; } s32int acc = n; char c[32]; int i = 0; while (acc > 0) { c[i] = '0' + acc%10; acc /= 10; i++; } c[i] = 0; char c2[32]; c2[i--] = 0; int j = 0; while(i >= 0) { c2[i--] = c[j++]; } monitor_write(c2); } monitor.h: // monitor.h -- Defines the interface for monitor.h // From JamesM's kernel development tutorials. #ifndef MONITOR_H #define MONITOR_H #include "common.h" // Write a single character out to the screen. void monitor_put(char c); // Clear the screen to all black. void monitor_clear(); // Output a null-terminated ASCII string to the monitor. void monitor_write(char *c); #endif // MONITOR_H common.c: // common.c -- Defines some global functions. // From JamesM's kernel development tutorials. #include "common.h" // Write a byte out to the specified port. void outb ( u16int port, u8int value ) { asm volatile ( "outb %1, %0" : : "dN" ( port ), "a" ( value ) ); } u8int inb ( u16int port ) { u8int ret; asm volatile ( "inb %1, %0" : "=a" ( ret ) : "dN" ( port ) ); return ret; } u16int inw ( u16int port ) { u16int ret; asm volatile ( "inw %1, %0" : "=a" ( ret ) : "dN" ( port ) ); return ret; } // Copy len bytes from src to dest. void memcpy(u8int *dest, const u8int *src, u32int len) { const u8int *sp = ( const u8int * ) src; u8int *dp = ( u8int * ) dest; for ( ; len != 0; len-- ) *dp++ =*sp++; } // Write len copies of val into dest. void memset(u8int *dest, u8int val, u32int len) { u8int *temp = ( u8int * ) dest; for ( ; len != 0; len-- ) *temp++ = val; } // Compare two strings. Should return -1 if // str1 < str2, 0 if they are equal or 1 otherwise. int strcmp(char *str1, char *str2) { int i = 0; int failed = 0; while ( str1[i] != '\0' && str2[i] != '\0' ) { if ( str1[i] != str2[i] ) { failed = 1; break; } i++; } // Why did the loop exit? if ( ( str1[i] == '\0' && str2[i] != '\0' || (str1[i] != '\0' && str2[i] =='\0' ) ) failed =1; return failed; } // Copy the NULL-terminated string src into dest, and // return dest. char *strcpy(char *dest, const char *src) { do { *dest++ = *src++; } while ( *src != 0 ); } // Concatenate the NULL-terminated string src onto // the end of dest, and return dest. char *strcat(char *dest, const char *src) { while ( *dest != 0 ) { *dest = *dest++; } do { *dest++ = *src++; } while ( *src != 0 ); return dest; } common.h: // common.h -- Defines typedefs and some global functions. // From JamesM's kernel development tutorials. #ifndef COMMON_H #define COMMON_H // Some nice typedefs, to standardise sizes across platforms. // These typedefs are written for 32-bit x86. typedef unsigned int u32int; typedef int s32int; typedef unsigned short u16int; typedef short s16int; typedef unsigned char u8int; typedef char s8int; void outb ( u16int port, u8int value ); u8int inb ( u16int port ); u16int inw ( u16int port ); #endif //COMMON_H main.c: // main.c -- Defines the C-code kernel entry point, calls initialisation routines. // Made for JamesM's tutorials <www.jamesmolloy.co.uk> #include "monitor.h" int main(struct multiboot *mboot_ptr) { monitor_clear(); monitor_write ( "hello, world!" ); return 0; } here is my makefile: C_SOURCES= main.c monitor.c common.c S_SOURCES= boot.s C_OBJECTS=$(patsubst %.c, obj/%.o, $(C_SOURCES)) S_OBJECTS=$(patsubst %.s, obj/%.o, $(S_SOURCES)) CFLAGS=-nostdlib -nostdinc -fno-builtin -fno-stack-protector -m32 -Iheaders LDFLAGS=-Tlink.ld -melf_i386 --oformat=elf32-i386 ASFLAGS=-felf all: kern/kernel .PHONY: clean clean: -rm -f kern/kernel kern/kernel: $(S_OBJECTS) $(C_OBJECTS) ld $(LDFLAGS) -o $@ $^ $(C_OBJECTS): obj/%.o : %.c gcc $(CFLAGS) $< -o $@ vpath %.c source $(S_OBJECTS): obj/%.o : %.s nasm $(ASFLAGS) $< -o $@ vpath %.s asem Hopefully this will help you understand what is going wrong and how to fix it :L Thanks in advance. Jamie.

    Read the article

  • Modify 3rd party code in subversion

    - by Alex
    I use a script for my homepage but I'd like to localize it. Furthermore the CSS uses images from a special folder which does not fit to my folder hierarchy. Because I don't want to adopt these paths and settings I'll have to modify the original sources. Currently my repository looks like this: /3rdParty /CompanyA /CompanyAProduct1 /v1_0 /v1_1 /MyProductA /branches /tags /trunk /import /export /source Via svn:externals I map all stuff I need (lib, dll, or code) into the import folder. Now I'd like to modify the files in the import folder but this will modify the original sources, too (as far as I know). What is the best solution to have the modified version in my import folder but the original sources remain unaffected? Should I make a branch of the 3rd party code? But then I have to update the original sources for every new release. Thanks!

    Read the article

  • core dump during std::_List_node_base::unhook()

    - by Ron
    I have a program where std::list is used. The program uses threads which act on the std::list as producers and consumers. When a message is dealt with by the consumer, it is removed from the list using pop_front(). But, during pop_front, there is a core dump. The gdb trace is as below. could you help getting me some insights into this issue? (gdb) bt full 0 0xf7531d7b in std::_List_node_base::unhook () from /usr/lib/libstdc++.so.6 No symbol table info available. 1 0x0805c600 in std::list ::_M_erase (this=0x806b08c, __position={_M_node = 0x8075308}) at /opt/target/usr/include/c++/4.2.0/bits/stl_list.h:1169 __n = (class std::_List_node<myMsg> *) 0x0 2 0x0805c6af in std::list ::pop_front (this=0x806b08c) at /opt/target/usr/include/c++/4.2.0/bits/stl_list.h:750 No locals. 3 0x0805afb6 in Base::run () at ../../src/Base.cc:342 nSentBytes = 130 tmpnm = {_vptr.myMsg = 0x80652c0, m_msg = 0x8075140 "{0130,MSG_TYPE=ND_FUNCTION,ORG_PNAME=P01vm01Ax,FUNCTION=LOG,PARAM_CNT=3,DATETIME=06/12/2010 02:59:26.187,LOGNAME=N,ENTRY=Debug 0 }", m_from = 0x8096ee0 "P01vm01Ax", m_to = 0x0, static m_logged = false, static m_pLogMutex = {_data = {_lock = 0, __count = 0, __owner = 0, __kind = 0, _nusers = 0, {_spins = 0, _list = {_next = 0x0}}}, __size = '\0' , __align = 0}} newMsg = {_vptr.myMsg = 0x80652c0, m_msg = 0x0, m_from = 0x0, m_to = 0x0, static m_logged = false, static m_pLogMutex = {_data = {_lock = 0, __count = 0, __owner = 0, __kind = 0, _nusers = 0, {_spins = 0, _list = {_next = 0x0}}}, __size = '\0' , __align = 0}} strBuffer = "{0440,MSG_TYPE=NG_FUNCTION,ORG_PNAME=mach01./opt/abc/VAvsk/abc/comp/DML/gendrs.pl.17560,DST_PNAME=P01vm01Ax,FUNCTION=DRS_REPLICATE,CAUSE_DML_ERROR=N,CORRUPT_DATA=N,CORRUPT_HEADER=N,DEBUG=Y,EXTENDED_RU"... fds = {{fd = 5, events = 1, revents = 0}} retval = 0 iWaitTime = 0 4 0x0805b277 in startRun () at ../../src/Base.cc:454 No locals. 5 0xf7effe7b in start_thread () from /lib/libpthread.so.0 No symbol table info available. 6 0xf744d82e in clone () from /lib/libc.so.6 No symbol table info available.

    Read the article

  • std::cin >> *aa results in a bus error

    - by Koning Baard XIV
    I have this a class called PPString: PPString.h #ifndef __CPP_PPString #define __CPP_PPString #include "PPObject.h" class PPString : public PPObject { char *stringValue[]; public: char *pointerToCharString(); void setCharString(char *charString[]); void setCharString(const char charString[]); }; #endif PPString.cpp #include "PPString.h" char *PPString::pointerToCharString() { return *stringValue; } void PPString::setCharString(char *charString[]) { *stringValue = *charString; } void PPString::setCharString(const char charString[]) { *stringValue = (char *)charString; } I'm trying to set the stringValue using std::cin: main.cpp PPString myString; myString.setCharString("LOLZ"); std::cout << myString.pointerToCharString() << std::endl; char *aa[1000]; std::cin >> *aa; myString.setCharString(aa); std::cout << myString.pointerToCharString() << std::endl; The first one, which uses a const char works, but the second one, with a char doesn't, and I get this output: copy and paste from STDOUT LOLZ im entering a string now... Bus error where the second line is what I entered, followed by pressing the return key. Can anyone help me fixing this? Thanks...

    Read the article

  • Subversion error, but I don't know what it means

    - by DaveDev
    I'm trying to do an Update on my solution but I'm getting the following subversion error: SharpSvn.SvnFileSystemException: Working copy path 'Path_to_image/logo LoRes.jpg' does not exist in repository but I can see that the image is in the repository. The stack trace is as follows: at SharpSvn.SvnClientArgs.HandleResult(SvnClientContext client, SvnException error) at SharpSvn.SvnClientArgs.HandleResult(SvnClientContext client, svn_error_t* error) at SharpSvn.SvnClient.Update(ICollection`1 paths, SvnUpdateArgs args, SvnUpdateResult& result) at SharpSvn.SvnClient.Update(String path, SvnUpdateArgs args, SvnUpdateResult& result) at Ankh.Commands.SolutionUpdateCommand.UpdateRunner.Work(Object sender, ProgressWorkerArgs e) at Ankh.ProgressRunnerService.ProgressRunner.Run(Object arg) Is there something else that could be wrong?

    Read the article

  • Compile time float packing/punning

    - by detly
    I'm writing C for the PIC32MX, compiled with Microchip's PIC32 C compiler (based on GCC 3.4). My problem is this: I have some reprogrammable numeric data that is stored either on EEPROM or in the program flash of the chip. This means that when I want to store a float, I have to do some type punning: typedef union { int intval; float floatval; } IntFloat; unsigned int float_as_int(float fval) { IntFloat intf; intf.floatval = fval; return intf.intval; } // Stores an int of data in whatever storage we're using void StoreInt(unsigned int data, unsigned int address); void StoreFPVal(float data, unsigned int address) { StoreInt(float_as_int(data), address); } I also include default values as an array of compile time constants. For (unsigned) integer values this is trivial, I just use the integer literal. For floats, though, I have to use this Python snippet to convert them to their word representation to include them in the array: import struct hex(struct.unpack("I", struct.pack("f", float_value))[0]) ...and so my array of defaults has these indecipherable values like: const unsigned int DEFAULTS[] = { 0x00000001, // Some default integer value, 1 0x3C83126F, // Some default float value, 0.005 } (These actually take the form of X macro constructs, but that doesn't make a difference here.) Commenting is nice, but is there a better way? It's be great to be able to do something like: const unsigned int DEFAULTS[] = { 0x00000001, // Some default integer value, 1 COMPILE_TIME_CONVERT(0.005), // Some default float value, 0.005 } ...but I'm completely at a loss, and I don't even know if such a thing is possible. Notes Obviously "no, it isn't possible" is an acceptable answer if true. I'm not overly concerned about portability, so implementation defined behaviour is fine, undefined behaviour is not (I have the IDB appendix sitting in front of me). As fas as I'm aware, this needs to be a compile time conversion, since DEFAULTS is in the global scope. Please correct me if I'm wrong about this.

    Read the article

  • Hibernate Bi- Directional many to many mapping advice!

    - by Rob
    hi all, i woundered if anyone might be able to help me out. I am trying to work out what to google for (or any other ideas!!) basically i have a bidirectional many to many mapping between a user entity and a club entity (via a join table called userClubs) I now want to include a column in userClubs that represents the role so that when i call user.getClubs() I can also work out what level access they have. Is there a clever way to do this using hibernate or do i need to rethink the database structure? Thank you for any help (or just for reading this far!!) the user.hbm.xml looks a bit like <set name="clubs" table="userClubs" cascade="save-update"> <key column="user_ID"/> <many-to-many column="activity_ID" class="com.ActivityGB.client.domain.Activity"/> </set> the activity.hbm.xml part <set name="members" inverse="true" table="userClubs" cascade="save-update"> <key column="activity_ID"/> <many-to-many column="user_ID" class="com.ActivityGB.client.domain.User"/> </set> The current userClubs table contains the fields id | user_ID | activity_ID I would like to include in there id | user_ID | activity_ID | role and be able to access the role on both sides...

    Read the article

  • How do you get subversion diff summary to ignore mergeinfo properties?

    - by tolomea
    I have subversion 1.6.5 client and 1.5.4 server. And I mostly only care about diffs on fully repository paths, not working copies. When diffing branches ones that have been merged already show up as identical except for the mergeinfo properties. This is a touch annoying for a human who has to then look through the changes looking for anything that might be a real change. However it's somewhat worse in out use case as we have scripts that run around checking on the merge state of various things and the mergeinfo properties cause them to highlight a lot of things as being out of sync when they aren't. Is there a way to get the diff summary to ignore the mergeinfo properties?

    Read the article

  • how to templatize partial template specializations?

    - by Kyle
    I'm not even sure what title to give this question; hopefully the code will demonstrate what I'm trying to do: #include <string> #include <list> using namespace std; template<typename A> class Alpha { public: A m_alpha_a; }; template<typename B> class Bravo { public: B m_bravo_b; }; template<> class Alpha<string> { public: string m_alpha_string; }; template<typename B> template<> class Alpha<Bravo<B> > { public: Bravo<B> m_bravo_class; // Line A }; int main() { Alpha<int> alpha_int; alpha_int.m_alpha_a= 4; Alpha<string> alpha_string; alpha_string.m_alpha_string = "hi"; Alpha<Bravo<int> > alpha_bravo_int; alpha_bravo_int.m_bravo_class.m_bravo_b = 9; }; I want to write a specialization for Alpha<A> when A is of any type Bravo<B>, but the compiler says invalid explicit specialization before ‘’ token enclosing class templates are not explicitly specialized (Referring to // Line A.) What's the correct syntax to do what I want?

    Read the article

  • confusing fork system call

    - by benjamin button
    Hi, i was just checking the behaviour of fork system call and i found it very confusing. i saw in a website that Unix will make an exact copy of the parent's address space and give it to the child. Therefore, the parent and child processes have separate address spaces #include <stdio.h> #include <sys/types.h> int main(void) { pid_t pid; char y='Y'; char *ptr; ptr=&y; pid = fork(); if (pid == 0) { y='Z'; printf(" *** Child process ***\n"); printf(" Address is %p\n",ptr); printf(" char value is %c\n",y); sleep(5); } else { sleep(5); printf("\n ***parent process ***\n",&y); printf(" Address is %p\n",ptr); printf(" char value is %c\n",y); } } the output of the above program is : *** Child process *** Address is 69002894 char value is Z ***parent process *** Address is 69002894 char value is Y so from the above mentioned statement it seems that child and parent have separet address spaces.this is the reason why char value is printed separately and why am i seeing the address of the variable as same in both child and parent processes.? Please help me understand this!

    Read the article

  • Qt MOC Filename Collisions using multiple .pri files

    - by Skinniest Man
    In order to keep my Qt project somewhat organized (using Qt Creator), I've got one .pro file and multiple .pri files. Just recently I added a class to one of my .pri files that has the same filename as a class that already existed in a separate .pri file. The file structure and makefiles generated by qmake appear to be oblivious to the filename collision that ensues. The generated moc_* files all get thrown into the same subdirectory (either release or debug, depending) and one ends up overwriting the other. When I try to make the project, I get several warnings that look like this: Makefile.Release:318: warning: overriding commands for target `release/moc_file.cpp` And the project fails to link. Here is a simple example of what I'm talking about. Directory structure: + project_dir | + subdir1 | | - file.h | | - file.cpp | + subdir2 | | - file.h | | - file.cpp | - main.cpp | - project.pro | - subdir1.pri | - subdir2.pri Contents of project.pro: TARGET = project TEMPLATE = app include(subdir1.pri) include(subdir2.pri) SOURCES += main.cpp Contents of subdir1.pri: HEADERS += subdir1/file.h SOURCES += subdir1/file.cpp Contents of subdir2.pri: HEADERS += subdir2/file.h SOURCES += subdir2/file.cpp Is there a way to tell qmake to generate a system that puts the moc_* files from separate .pri files into separate subdirectories?

    Read the article

  • Granite DS Actionscript Code Generation Ant cannot find class error

    - by Roaders
    I am trying to get my Ant build to run the granite DS Actionscript code generation task and am running into some problems. At the moment I am getting this error: BUILD FAILED C...\build.xml:62: Could not load Java class file: SampleDTOOne.class So the .class files are obviously being found. I am not however sure if this error means that the it cannot load the .class file or that it cannot find the actual java source code. My Ant task definition looks like this: <classpath> <pathelement location="C.../src/packages/" /> </classpath> <fileset dir="${base.build.dir}/jc/classes/gpbit/packageName"> <include name="*.class" /> </fileset> </gas3> I have tried many different values for the classpath but cannot get anythign to work. I do not like the path that I am using to find the .class files but again at the moment this is the only one I can get to work. None of the variables seem to make it any easier to get to this location. The fileset is definitely working as it definitely found the .clas files to include the name in the error message. More detailed error message: [gas3] Using output dir: C...trunk\plugin\build/etc/src/as3 [gas3] Using classpath: C...\trunk\plugin\src\packages [gas3] Loading all Java classes referenced by inner fileset(s) { [gas3] java.lang.ClassNotFoundException: SampleDTOOne [gas3] at org.apache.tools.ant.AntClassLoader.findClassInComponents(AntClassLoader.java:1361) any help much appreciated

    Read the article

  • Rolling back database changes

    - by justin
    Hi, I work in team which uses Work flow management tool. I was presented with a challenge where the user should be able to roll back the changes made anytime during the flow to a certain point in the past. Surely the toll can handle it but the additional database calls that may have made during these activities have to be manually rolled back. the challenge is that there are multiple parallel paths and there different permutations of external database calls. So is there a frame work or a way to keep track of these DB calls and rollback them?. thank you, Justin

    Read the article

< Previous Page | 218 219 220 221 222 223 224 225 226 227 228 229  | Next Page >