Search Results

Search found 5670 results on 227 pages for 'zend router'.

Page 222/227 | < Previous Page | 218 219 220 221 222 223 224 225 226 227  | Next Page >

• IT merger - self-sufficient site with domain controller VS thin clients outpost with access to termi

  - by imagodei

  SITUATION: A larger company acquires a smaller one. IT infrastructure has to be merged. There are no immediate plans to change the current size or role of the smaller company - the offices and production remain. It has a Win 2003 SBS domain server, Win 2000 file server, linux server for SVN and internal Wikipedia, 2 or 3 production machines, LTO backup solution. The servers are approx. 5 years old. Cisco network equippment (switches, wireless, ASA). Mail solution is a hosted Exchange. There are approx. 35 desktops and laptops in the company. IT infrastructure unification: There are 2 IT merging proposals. 1.) Replacing old servers, installing Win Server 2008 domain controller, and setting up either subdomain or domain trust to a larger company. File server and other servers remain local and synchronization should be set up to a centralized location in larger company. Similary with the backup - it remains local and if needed it should be replicated to a centralized location. Licensing is managed by smaller company. 2.) All servers are moved to a centralized location in larger company. As many desktop machines as possible are replaced by thin clients. The actual machines are virtualized and hosted by Terminal server at the same central location. Citrix solutions will be used. Only router and site-2-site VPN connection remain at the smaller company. Backup internet line to insure near 100% availability is needed. Licensing is mainly managed by larger company. Only specialized software for PCs that will not be virtualized is managed by smaller company. I'd like to ask you to discuss both solutions a bit. In your opinion, which is better from the operational point of view? Which is more reliable, cheaper in the long run? Easier to manage from the system administrator's point of view? Easier on the budget and easier to maintain from IT department's point of view? Does anybody have any experience with the second option and how does it perform in production environment? Pros and cons of both? Your input will be of great significance to me. Thank you very much!

  Read the article

• Mysterious visitor to hidden PHP page

  - by B. VB.

  On my website, I have a "hidden" page that displays a list of the most recent visitors. There exist no links at all to this single PHP page, and, theoretically, only I know of its existence. I check it many times per day to see what new hits I have. However, about once a week, I get a hit from a 208.80.194.* address on this supposedly hidden page (it records hits to itself). The strange thing is this: this mysterious person/bot does not visit any other page on my site. Not the public PHP pages, but only this hidden page that prints the visitors. It's always a single hit, and the HTTP_REFERER is blank. The other data is always some variation of Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; YPC 3.2.0; FunWebProducts; .NET CLR 1.1.4322; SpamBlockerUtility 4.8.4; yplus 5.1.04b) ... but sometimes MSIE 6.0 instead of 7, and various other plug ins. The browser is different every time, as with the lowest-order bits of the address. And it's just that. One hit per week or so, to that one page. Absolutely no other pages are touched by this mysterious vistor. Doing a whois on that IP address showed it's from the new york area, and from the "Websense" ISP. The lowest order 8 bits of their address are always different, but always from 208.80.194.*/8. From most of the computers that I access my website, doing a tracerout to my server does not contain a router anywhere along the way with the IP 208.80.*. So that rules out any kind of HTTP sniffing, I might think. I have NO idea how, why this is happening. Does anyone have any clue, or have seen something as strange as this before? It seems completely benign, but unexplainable and a little creepy. Thanks in advance!

  Read the article

• Local dns for testing websites using mobile devices

  - by Morpheu5

  Hi. I have no idea where to start from so sorry in advance if this topic has already been discussed. I usually develop web sites using my laptop as a development server, and recently I needed to test a web site using various mobile devices that can connect via wifi. Having no real AP, I set up a ad-hoc network using my laptop's wireless card and the devices can correctly browse the Internet and access the laptop's web server. The setup is as follows: subnet: 192.168.1.0/24 gateway to the Internet (wired adsl router/modem): 192.168.1.1 laptop: 192.168.1.64 (eth0, wired if connected to the gateway) and 192.168.1.32 (eth1, wifi if somewhat bridged to eth0) mobile devices (same for all, I only use one of them at any time for simplicity): 192.168.1.11 with default gw 192.168.1.1 Now, if I open either 192.168.1.32 or 192.168.1.64 from the mobile devices, I correctly get the default host of my Apache configuration. However I usually work with virtual hosts for many practical reasons, one of which being Drupal's peculiar implementation of multi-sites. For those who don't know how this works, Drupal takes the request's hostname and searches into its sites/ subdirectories for an appropriate configuration file. So, for example, suppose I request www.example.com, then Drupal would search for a config file in the following directories: sites/www.example.com/ sites/example.com/ sites/com/ sites/default/ So I decided to adopt the following style of virtual hosts: if the website I'm working on will be accessible using www.example.com I set up a sites/www.example.com/ directory and create a virtual host for local.www.example.com so Drupal have no trouble finding it. I've been told this is suboptimal from a dns point of view since I'd have to create an authoritative entry for example.com and turn Bind on only when I'm supposed to access the local copy, which is weird. However, if this is the only path I can follow, I still have some problems with Bind's configuration, as I couldn't find any guide that tells me in a clear, noob-friendly way, how to set up such an entry. On the other hand, I was wondering if I could set up an authoritative entry for local, so I could access www.example.com.local and tell in some way (which I don't even know if this is possible) Apache to put www.example.com instead of www.example.com.local in the relevant environment variable. Anyway, I have a last problem, sort of: when I launch Bind in debug mode with high verbosity, and make 192.168.1.32 as the primary dns for the devices, the output doesn't say anything about requests being made from the devices to Bind, so I'm not even sure it comes into play. As you can see, I'm a complete noob at these matters, but I'm eager to learn, so any help/pointer will be appreciated.

  Read the article

• Mac OSX 10.8 Server DNS Domain Routing

  - by Oldek

  I just cant seem to figure out the logic in how to configure my Mac Server. So I have set up an DNS, which will take the domain and all subdomains and point towards an IP. File: db.mydomain.com (in /var/named/) mydomain.com. 10800 IN SOA mydomain.com. admin.mydomain.com. ( 2012110903 ; serial 3600 ; refresh (1 hour) 900 ; retry (15 minutes) 1209600 ; expire (2 weeks) 86400 ; minimum (1 day) ) 10800 IN NS mydomain.com. 10800 IN A 10.0.1.2 www.mydomain.com. 10800 IN A 10.0.1.2 So I want all of these requests to be requested to the 10.0.1.2 server, as I run 2 servers in my cluster. This one has always handled the requests, and now I want to add a server in between. So the server in between will get all the signals from my router which NAT the trafic coming from outside. So after setting this up and trying to point my port 80 towards my new server which will be the middle point, it doesn't work. Is it even possible to do it this way? First server: Mac Second server: Linux So what I try to achieve once more: 1. User goes to mydomain.com or www.mydomain.com 2. User request gets handled by my first server 3. First server refers to a local server, which is only available locally (it is configured to allow requests on port 80 and handle them) 4. Second server receives signal 5. Second server returns a request (either directly send to user or send through first server, whichever is most secure and configurable) I also want to be able to set up domains that lead to other servers in the future, and some that are only available within the VPN. (If that changes anything) I hope some kind soul could help me with this, it is really cumbersome for my mind to get the logic here. Do I have to configure my other server in any way? /Marcus

  Read the article

• Asterisk server firewall script allows 2-way audio from incoming calls, but not on outgoing?

  - by cappie

  I'm running an Asterisk PBX on a virtual machine directly connected to the Internet and I really want to prevent script kiddies, l33t h4x0rz and actual hackers access to my server. The basic way I protect my calling-bill now is by using 32 character passwords, but I would much rather have a way to protect The firewall script I'm currently using is stated below, however, without the established connection firewall rule (mentioned rule #1), I cannot receive incoming audio from the target during outgoing calls: #!/bin/bash # first, clean up! iptables -F iptables -X iptables -t nat -F iptables -t nat -X iptables -t mangle -F iptables -t mangle -X iptables -P INPUT ACCEPT iptables -P FORWARD DROP # we're not a router iptables -P OUTPUT ACCEPT # don't allow invalid connections iptables -A INPUT -m state --state INVALID -j DROP # always allow connections that are already set up (MENTIONED RULE #1) iptables -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT # always accept ICMP iptables -A INPUT -p icmp -j ACCEPT # always accept traffic on these ports #iptables -A INPUT -p tcp --dport 80 -j ACCEPT iptables -A INPUT -p tcp --dport 22 -j ACCEPT # always allow DNS traffic iptables -A INPUT -p udp --sport 53 -j ACCEPT iptables -A OUTPUT -p udp --dport 53 -j ACCEPT # allow return traffic to the PBX iptables -A INPUT -p udp -m udp --dport 50000:65536 -j ACCEPT iptables -A INPUT -p udp -m udp --dport 10000:20000 -j ACCEPT iptables -A INPUT -p udp --destination-port 5060:5061 -j ACCEPT iptables -A INPUT -p tcp --destination-port 5060:5061 -j ACCEPT iptables -A INPUT -m multiport -p udp --dports 10000:20000 iptables -A INPUT -m multiport -p tcp --dports 10000:20000 # IP addresses of the office iptables -A INPUT -s 95.XXX.XXX.XXX/32 -j ACCEPT # accept everything from the trunk IP's iptables -A INPUT -s 195.XXX.XXX.XXX/32 -j ACCEPT iptables -A INPUT -s 195.XXX.XXX.XXX/32 -j ACCEPT # accept everything on localhost iptables -A INPUT -i lo -j ACCEPT # accept all outgoing traffic iptables -A OUTPUT -j ACCEPT # DROP everything else #iptables -A INPUT -j DROP I would like to know what firewall rule I'm missing for this all to work.. There is so little documentation on which ports (incoming and outgoing) asterisk actually needs.. (return ports included). Are there any firewall/iptables specialists here that see major problems with this firewall script? It's so frustrating not being able to find a simple firewall solution that enabled me to have a PBX running somewhere on the Internet which is firewalled in such a way that it can ONLY allows connections from and to the office, the DNS servers and the trunk(s) (and only support SSH (port 22) and ICMP traffic for the outside world). Hopefully, using this question, we can solve this problem once and for all.

  Read the article

• Python cannot go over internet network

  - by user1642826

  I am currently trying to work with python networking and I have reached a bit of a road block. I am not able to network with any computer but localhost, which is kind-of useless with what networking is concerned. I have tried on my local network, from one computer to another, and I have tried over the internet, both fail. The only time I can make it work is if (when running on the server's computer) it's ip is set as 'localhost' or '192.168.2.129' (computers ip). I have spent hours going over opening ports with my isp and have gotten nowhere, so I decided to try this forum. I have my windows firewall down and I have included some pictures of important screen shots. I have no idea what the problem is and this has spanned almost a year of calls to my isp. The computer, modem, and router have all been replaced in that time. Screen shots: import socket import threading import socketserver class ThreadedTCPRequestHandler(socketserver.BaseRequestHandler): def handle(self): data = self.request.recv(1024) cur_thread = threading.current_thread() response = "{}: {}".format(cur_thread.name, data) self.request.sendall(b'worked') class ThreadedTCPServer(socketserver.ThreadingMixIn, socketserver.TCPServer): pass def client(ip, port, message): sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM) sock.connect((ip, port)) try: sock.sendall(message) response = sock.recv(1024) print("Received: {}".format(response)) finally: sock.close() if __name__ == "__main__": # Port 0 means to select an arbitrary unused port HOST, PORT = "192.168.2.129", 9000 server = ThreadedTCPServer((HOST, PORT), ThreadedTCPRequestHandler) ip, port = server.server_address # Start a thread with the server -- that thread will then start one # more thread for each request server_thread = threading.Thread(target=server.serve_forever) # Exit the server thread when the main thread terminates server_thread.daemon = True server_thread.start() print("Server loop running in thread:", server_thread.name) ip = '12.34.56.789' print(ip, port) client(ip, port, b'Hello World 1') client(ip, port, b'Hello World 2') client(ip, port, b'Hello World 3') server.shutdown() I do not know where the error is occurring. I get this error: Traceback (most recent call last): File "C:\Users\Dr.Frev\Desktop\serverTest.py", line 43, in <module> client(ip, port, b'Hello World 1') File "C:\Users\Dr.Frev\Desktop\serverTest.py", line 18, in client sock.connect((ip, port)) socket.error: [Errno 10061] No connection could be made because the target machine actively refused it Any help will be greatly appreciated. *if this isn't a proper forum for this, could someone direct me to a more appropriate one.

  Read the article

• How to troubleshoot port forwarding on Windows 7 (64 Bit) with ICS enabled?

  - by LearnCocos2D

  I want to forward some ports (1666 for perforce, 8081 for Hudson) on my Internet Gateway machine. This machine is running Windows 7 (64 Bit, legal, user-account) and connected to the Internet via cable modem (it's not a router). The Windows machine is sharing its Internet Connection via ICS and that works fine on all connected computers. I can access the services via the gateway's public IP (95.x.x.x) on the given ports if they are running on the gateway machine itself. I've added the ports and destination IP address (192.168.0.18) in the Internet network adapter's Advanced Settings dialog (Sharing tab). That's the same dialog where you have a list of preconfigured services like HTTP, FTP and other incoming services. When I do that I can't connect to the services anymore. For some reason port forwarding isn't working. I have uninstalled Bitdefender because I wanted to check if the Firewall interferes. I've also disabled the Windows Firewall and Defender to no avail. I tried a freeware tool that helps to setup port forwarding but that didn't work either. The target machine is a Mac OS X computer whose Firewall is disabled. The IP is static. I can successfully connect to the services using the local IP address (192.168.0.18) from two different machines, including the gateway computer. So internally and externally it seems to me that the ports are open and not blocked, and the issue is with port forwarding itself. From what I understand it should be enough to add an entry to the Advanced Settings dialog to enable port forwarding when there are no firewalls interfering. How can I troubleshoot why port forwarding isn't working for me? What steps should I follow to alleviate the issue? PS: I gladly accept command line solutions. Other things I've tried: adding an Inbound Rule to Windows Firewall for the 1666, 8081 ports trying with Windows Firewall enabled and disabled disabling/enabling the network adapter double-checked that the IP addresses are correct mapping a different incoming port to the service's actual port followed or checked the misc tips in this article What I haven't dared trying yet (let me know if it's worth a shot): disable/enable ICS remove all network adapters (via Control Panel), then re-install and re-configure them

  Read the article

• Internet Pings but Does Not Load

  - by t3techcom18

  From what I've been seeing and been doing my research for the past two days, many people have been having the same issues throughout the years, however, this is the first time I've encountered this issue and many of the specific workarounds or fixes have not worked for me. I've been trying to work through this for 24 hours straight now, but to no avail so many thanks to those that can help. On Monday night, got home from work; surfing the internet for half an hour, everything was fine as always. Just after half an hour, my Internet got very sluggish and then it died completely. I thought it might have been the an update I just put through in terms of Windows Update that said was a critical update for MSE, as the same thing happened a few years ago. I did a System Restore to two different dates that were in the past two weeks, nothing. Uninstalled MSE and disabled Windows Defender and the Windows Firewall: Nothing. Reset IE Options, Reset Winsock, Dumping DNS, many of the other command prompt screens to reset items: Nothing. Reset the modem: Nothing. What DID work, however, was a ping test to Yahoo. The ping test worked, saying all four packets was recieved, yet nothing else popped up. LAN and CenturyLink said everything worked on their end and that everything was connected properly, as well as the speeds working fine. CenturyLink said in their notes that they thought Port 80 was blocked. I went and put in the Firewall to allow Port 80 but it didn't make any difference whatsoever. I remembered I had a spare modem laying around and I switched them up, both modem and the cords - nothing. I then hooked it up to my netbook to see if that would work, as it usually does - connection didn't work there either. Like I said, it's been about 24 hours now and this is increasingly frustrating, as I've tried all solutions (While browsing through 10 search results pages on my phone) suggested and still nothing. Any suggestions and tricks would be greatly appreciated! Here's my specs: Windows 7 32-bit Home Premium Intel Core 2 Duo 3.14 Ghz 4 GB Kingston DDR2 RAM eVGA nForce 750i SLI eVGA GeForce GTX 560 Ti FPB ISP: CenturyLink No router Modem: CenturyLink 660 Series Hardwired connection PLEASE NOTE: This is the only computer I have (Like I said, the netbook solution didn't work), so downloading programs and such is not an option til I get to other computers somewhere else, like right now. Unless someone knows of a way of copying/pasting a file in Windows and then transferring said info to an Android smartphone, this is gunna take a while haha. Patience is requested.

  Read the article

• No external network on ubuntu 9.10, though dns works..

  - by user29368

  Hi, I have a weird problem I cant solve. I have several computers, two with xubuntu 9.10 One of them, acting as a media server, has stopped to work when it comes to external network.. I can do for example: ping google.com Which gives me an ip adress back, like: name@Media:/etc$ ping google.com PING google.com (66.102.9.147) 56(84) bytes of data. That tells me it reaches the dns?, but I get no response at all... If I ping a local computer all works fine. I can also reach the computer via ssh without any problems. I have always used network manager, but now I uninstalled it and made the settings manually like this: /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.1.52 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.1 Still no luck. I have no specific settings for this one in my router, and all the other computers, including my win laptop works fine. This is very annoying since I cant even do an update or anything.. ifconfig looks like this: eth0 Link encap:Ethernet HWaddr 00:24:1d:9f:10:89 inet addr:192.168.1.52 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::224:1dff:fe9f:1089/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:15410 errors:0 dropped:0 overruns:0 frame:0 TX packets:2693 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1167398 (1.1 MB) TX bytes:694973 (694.9 KB) Interrupt:27 Base address:0xe000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:2150 errors:0 dropped:0 overruns:0 frame:0 TX packets:2150 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:143456 (143.4 KB) TX bytes:143456 (143.4 KB) route -n like this Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 0.0.0.0 192.168.1.1 0.0.0.0 UG 100 0 0 eth0 I do not know where the adress starting with 169.254 comes from.. Could that be a part of the problem? Hoping for some assistance since Im totally stuck here.. /george

  Read the article

• CodePlex Daily Summary for Sunday, March 07, 2010

  CodePlex Daily Summary for Sunday, March 07, 2010New ProjectsAlgorithminator: Universal .NET algorithm visualizer, which helps you to illustrate any algorithm, written in any .NET language. Still in development.ALToolkit: Contains a set of handy .NET components/classes. Currently it contains: * A Numeric Text Box (an Extended NumericUpDown) * A Splash Screen base fo...Automaton Home: Automaton is a home automation software built with a n-Tier, MVVM pattern utilzing WCF, EF, WPF, Silverlight and XBAP.Developer Controls: Developer Controls contains various controls to help build applications that can script/write code.Dynamic Reference Manager: Dynamic Reference Manager is a set (more like a small group) of classes and attributes written in C# that allows any .NET program to reference othe...indiologic: Utilities of an IndioNeural Cryptography in F#: This project is my magistracy resulting work. It is intended to be an example of using neural networks in cryptography. Hashing functions are chose...Particle Filter Visualization: Particle Filter Visualization Program for the Intel Science and Engineering FairPólya: Efficient, immutable, polymorphic collections. .Net lacks them, we provide them*. * By we, we mean I; and by efficient, I mean hopefully so.project euler solutions from mhinze: mhinze project euler solutionsSilverlight 4 and WCF multi layer: Silverlight 4 and WCF multi layersqwarea: Project for a browser-based, minimalistic, massively multiplayer strategy game. Part of the "Génie logiciel et Cloud Computing" course of the ENS (...SuperSocket: SuperSocket, a socket application framework can build FTP/SMTP/POP server easilyToast (for ASP.NET MVC): Dynamic, developer & designer friendly content injection, compression and optimization for ASP.NET MVCNew ReleasesALToolkit: ALToolkit 1.0: Binary release of the libraries containing: NumericTextBox SplashScreen Based on the VB.NET code, but that doesn't really matter.Blacklist of Providers: 1.0-Milestone 1: Blacklist of Providers.Milestone 1In this development release implemented - Main interface (Work Item #5453) - Database (Work Item #5523)C# Linear Hash Table: Linear Hash Table b2: Now includes a default constructor, and will throw an exception if capacity is not set to a power of 2 or loadToMaintain is below 1.Composure: CassiniDev-Trunk-40745-VS2010.rc1.NET4: A simple port of the CassiniDev portable web server project for Visual Studio 2010 RC1 built against .NET 4.0. The WCF tests currently fail unless...Developer Controls: DevControls: These are the version 1.0 releases of these controls. Download the individually or all together (in a .zip file). More releases coming soon!Dynamic Reference Manager: DRM Alpha1: This is the first release. I'm calling it Alpha because I intend implementing other functions, but I do not intend changing the way current functio...ESB Toolkit Extensions: Tellago SOA ESB Extenstions v0.3: Windows Installer file that installs Library on a BizTalk ESB 2.0 system. This Install automatically configures the esb.config to use the new compo...GKO Libraries: GKO Libraries 0.1 Alpha: 0.1 AlphaHome Access Plus+: v3.0.3.0: Version 3.0.3.0 Release Change Log: Added Announcement Box Removed script files that aren't needed Fixed & issue in directory path Stylesheet...Icarus Scene Engine: Icarus Scene Engine 1.10.306.840: Icarus Professional, Icarus Player, the supporting software for Icarus Scene Engine, with some included samples, and the start of a tutorial (with ...mavjuz WndLpt: wndlpt-0.2.5: New: Response to 5 LPT inputs "test i 1" New: Reaction to 12 LPT outputs "test q 8" New: Reaction to all LPT pins "test pin 15" New: Syntax: ...Neural Cryptography in F#: Neural Cryptography 0.0.1: The most simple version of this project. It has a neural network that works just like logical AND and a possibility to recreate neural network from...Password Provider: 1.0.3: This release fixes a bug which caused the program to crash when double clicking on a generic item.RoTwee: RoTwee 6.2.0.0: New feature is as next. 16649 Add hashtag for tweet of tune.Now you can tweet your playing tune with hashtag.Visual Studio DSite: Picture Viewer (Visual C++ 2008): This example source code allows you to view any picture you want in the click of a button. All you got to do is click the button and browser via th...WatchersNET CKEditor™ Provider for DotNetNuke: CKEditor Provider 1.8.00: Whats New File Browser: Folders & Files View reworked File Browser: Folders & Files View reworked File Browser: Folders are displayed as TreeVi...WSDLGenerator: WSDLGenerator 0.0.0.4: - replaced CommonLibrary.dll by CommandLineParser.dll - added better support for custom complex typesMost Popular ProjectsMetaSharpSilverlight ToolkitASP.NET Ajax LibraryAll-In-One Code FrameworkWindows 7 USB/DVD Download Toolニコ生アラートWindows Double ExplorerVirtual Router - Wifi Hot Spot for Windows 7 / 2008 R2Caliburn: An Application Framework for WPF and SilverlightArkSwitchMost Active ProjectsUmbraco CMSRawrSDS: Scientific DataSet library and toolsBlogEngine.NETjQuery Library for SharePoint Web Servicespatterns & practices – Enterprise LibraryIonics Isapi Rewrite FilterFarseer Physics EngineFasterflect - A Fast and Simple Reflection APIFluent Assertions

  Read the article

• CodePlex Daily Summary for Monday, October 07, 2013

  CodePlex Daily Summary for Monday, October 07, 2013Popular ReleasesGhostscript.NET: Ghostscript.NET v.1.1.0.: v.1.1.0. added GhostscriptViewer state handling (SaveState, RestoreState) GhostscriptRasterizer constructor is extended in order to support usage of the existing GhostscriptViewer instance. fixed problem while using a 32-bit assembly with 32-bit version of Ghostscript on 64-bit Windows: It couldn't find a registry key of installed Ghostscript. Reported and fixed by "r0land". v.1.0.9. implemented EPS (Encapsulated PostScript) support for the GhostscriptViewer. added GhostscriptRasterize...Ghostscript Studio: Ghostscript.Studio v.1.0.2: Ghostscript Studio is easy to use Ghostscript IDE, a tool that facilitates the use of the Ghostscript interpreter by providing you with a graphical interface for postscript editing and file conversions. Ghostscript Studio allows you to preview postscript files, edit the code and execute them in order to convert PDF documents and other formats. The program allows you to convert between PDF, Postscript, EPS, TIFF, JPG and PNG by using the Ghostscript.NET Processor. v.1.0.2. added custom -c s...cmdradio: v0.1.1 binary: Default download in win32. For other OS see here. This is alpha version. Please report all bugs.Media Companion: Media Companion MC3.579b: Fixed IMDB actor scraping for Movies and TV. Note: there are a couple of new functions that are not active, as this release needed to be done due to IMDB change. New* TV - context menu for rescrapeing Poster image/Banner image Fixed* Both - Fixed actor scraping from IMDB * Movie - Fixed Tableview if Movie's movieset was not in MC's list of moviesets * Movie - Rename with mediainfo now lowercase. * Both - added ignore "A " in titles. Separate option in General Preferences. * Tv - Changing ...VidCoder: 1.5.7 Beta: Updated HandBrake core to SVN 4819. About dialog now pulls down HandBrake version from the DLL. Added a confirmation dialog to Stop if the encode has been going on for more than 5 minutes. Fixed handling of unicode characters for input and output filenames. We now encode to UTF-8 before passing to HandBrake. Fixed a crash in the queue multiple titles dialog. Added code to rescue tool windows which get placed outside of the visible screen area.Wsus Package Publisher: Release v1.3.1310.05: Enhance the "Reboot Remote Computers", by adding a timer before the reboot occure. So that remote users can save their documents and close applications. You can also add a message to be display. In 'Tools'->'Settings'-> Misc Tab, you can set a default message. Enhance the "Compare Computers against AD", by choosing OUs to include in the comparison.Event-Based Components AppBuilder: AB3.Iteration.53: Iteration 53 (Feature): Allow drag&drop of existing component (flow, step) from component list to chart. Duplicate names are automatically recognized and solved. By the color of the draged component you can see what kind of component (flow or step) is currently draged. New: AddExistingComponentFlow, PartDragDropEventHandler, ExistingStepPreparerPulse: Pulse 0.6.7.3: Pulse is now accepting donations. To donate by Bitcoin or PayPal see https://pulse.codeplex.com/wikipage?title=Donations Lots of updates in v0.6.7.3: (Feature) New option allows you to disable wallpaper changing when a full screen application is running. This way Pulse doesn't slow down/lag your videos and games :) (Fix) Some users were getting Wallbase errors when logging in. This has been fixed. (Feature) Right click a provider and you can now make a copy of it by selecting the "Dupl...MoreTerra (Terraria World Viewer): MoreTerra 1.11.1: Release 1.11.1 =========== =Bug Fixes= =========== Added more tile blocks (Clouds, crimstone) Added items (binoculars, rope, Pirahna Gun) Added ores (Lead, Tin) Chests now work, I broke them yesterday. =============== =Known Issues= =============== I am having trouble with new background walls. So you will see a red outline for crimson then a pink inside. Same with where I think the queen bee lives.VG-Ripper & PG-Ripper: PG-Ripper 1.4.19: NEW: Added Option to login as Guest NEW: Added Menu Option to delete an Forum Account NEW: Added Support for "ImageTeam.org links FIXED: Fixed Ripping of http://forum.babeunion.com ForumsSingle Line Diagram (Electrical) Control Library: Single Line Diagram (Electrical) Control Lib - 1.2: In this release of SLD (Electrical) Control Lib I have fix code for the following symbols... 1. Switch 2. Isolator 3. Lightening Arrestor 4. Meter A new symbol is added for "Pothead Terminal" You can give it a try. I will keep improving and posting the new features.State of Decay Save Manager: Version 1.0.4: Add version at bottom of formCollection Commander for Configuration Manager 2012: CMCollCtr_1.0.0.2: Windows Installer (MSI) setup;New Ribbon Toolbar implemented; more Powershell commands...Classic WiX Burn Theme: Classic WiX Burn Theme 1.0: Project Description A WiX Burn theme inspired by the classic WiX wizard user interface.QuickConverter: QuickConverter 0.7.3 Beta: Allows access to external variables from inside lambda expressions.DNN® Form and List: DNN Form and List 06.00.07: DotNetNuke Form and List 06.00.06 Changes to 6.0.7•Fixed an error in datatypes.config that caused calculated fields to be missing in 6.0.6 Changes to 6.0.6•Add in Sql to remove 'text on row' setting for UserDefinedTable to make SQL Azure compatible. •Add new azureCompatible element to manifest. •Added a fix for importing templates. Changes to 6.0.2•Fix: MakeThumbnail was broken if the application pool was configured to .Net 4 •Change: Data is now stored in nvarchar(max) instead of ntext C...Trace Reader for Microsoft Dynamics CRM: Trace Reader (1.2013.10.3): Fix a bug when the first caracter of a description line is '[' Add search featureSimpleExcelReportMaker: Serm 0.03: SourceCode and Sample .Net Framework 3.5 AnyCPU compile.Application Architecture Guidelines: App Architecture Guidelines 3.0.8: This document is an overview of software qualities, principles, patterns, practices, tools and libraries.BlackJumboDog: Ver5.9.6: 2013.09.30 Ver5.9.6 (1)SMTP???????、???????????????? (2)WinAPI??????? (3)Web???????CGI???????????????????????New ProjectsASP.NET and ASP.NET MVC Blog Test: As a recent convert from Windows Forms & WPF to ASP.NET and ASP.NET MVC, I've created a simple project and implemented it twice using ASP.NET and ASP.NET MVC.cmdradio: Simple command-line interface internet radio playerDa Nang College Of Technology: Cao Ð?ng Công Ngh?DNN Camera Slideshow: The Camera Slideshow module for DNNFolder Iterator: Folder Iterator is a program I made one night to iterate through a folder and output an ordered list of files contained within the chosen directory.foobarpoc: fooJamendo Search Rest: This project uses the Jamendo REST API to search songs by title.Lab Nhibernate, PRISM, WPF, FLUENT, C#, ServiceStack, JSON: This is a lab for new technology and solving real developer problem Merch ASP.NET: This project is a port of Merch built on Zend framework 2 / PHP 5.MyTest2: This is test project2.Paintbear: Paintbear is a free open-source Paint Program and Image Manipulation Program for Windows based on the .NET Framework(version4). Works on Linux,too ! With Wine RasterConversion (.Net framework): Comparison of variants for working with raster (Bitmap class) at a low level. .Net framework, C#SSIS Custom Connection Manager: Example code for creating a Custom Connection Manager in SSIS 2008 and 2012Web Scripting Project: This is a project related to web application development at the Universtity of HertfordshireWebscripting1: New Scripting Website for University of Herts course Write.NET: Another .NET Blogging Engine: Write.NET is currently under development. Write.NET will be lightweight and highly configurable blogging engine built in MVC4Yoer: ????ASP.NET MVC??，????????????

  Read the article

• CodePlex Daily Summary for Tuesday, September 25, 2012

  CodePlex Daily Summary for Tuesday, September 25, 2012Popular ReleasesRawr: Rawr 5.0.0: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr Addon (NOT UPDATED YET FOR MOP)We now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including ba...Coevery - Free CRM: Coevery 1.0.0.26: The zh-CN issue has been solved. We also add a project management module.VidCoder: 1.4.1 Beta: Updated to HandBrake 4971. This should fix some issues with stuck PGS subtitles. Fixed build break which prevented pre-compiled XML serializers from showing up. Fixed problem where a preset would get errantly marked as modified when re-opening the encode settings window or importing a new preset.D3 Loot Tracker: 1.3: Added the ability to reload a previous session to be able to resume it. Removed goblin detection, let's keep this an item tracking utility only. Fixed a bug with crafting sound setting not working properly. Completely re-styled the UI.JSLint for Visual Studio 2010: 1.4.0: VS2012 support is alphaBlackJumboDog: Ver5.7.2: 2012.09.23 Ver5.7.2 (1)InetTest?? (2)HTTP?????????????????100???????????Player Framework by Microsoft: Player Framework for Windows 8 (Preview 6): IMPORTANT: List of breaking changes from preview 5 Added separate samples download with .vsix dependencies instead of source dependencies Support for FreeWheel SmartXML ad responses Support for Smooth Streaming SDK DownloaderPlugins Support for VMAP and TTML polling for live scenarios Support for custom smooth streaming byte stream and scheme handlers Support for new play time and position tracking plugin Added IsLiveChanged event Added AdaptivePlugin.MaxBitrate property Add...WPF Application Framework (WAF): WPF Application Framework (WAF) 2.5.0.8: Version: 2.5.0.8 (Milestone 8): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Changelog Legend: [B] Breaking change; [O] Marked member as obsolete WAF: Mark the class DataModel as serializable. InfoMan: Minor improvements. InfoMan: Add unit tests for all modules. Othe...LogicCircuit: LogicCircuit 2.12.9.20: Logic Circuit - is educational software for designing and simulating logic circuits. Intuitive graphical user interface, allows you to create unrestricted circuit hierarchy with multi bit buses, debug circuits behavior with oscilloscope, and navigate running circuits hierarchy. Changes of this versionToolbars on text note dialog are more flexible now. You can select font face, size, color, and background of text you are typing. RAM now can be initialized to one of the following: random va...SiteMap Editor for Microsoft Dynamics CRM 2011: SiteMap Editor (1.1.2020.421): New features: Disable a specific part of SiteMap to keep the data without displaying them in the CRM application. It simply comments XML part of the sitemap (thanks to rboyers for this feature request) Right click an item and click on "Disable" to disable it Items disabled are greyed and a suffix "- disabled" is added Right click an item and click on "Enable" to enable it Refresh list of web resources in the web resources pickerHigLabo: HigLabo_20120919: Add XXXAsync method to all Client class for async await pattern. (HttpClient,BoxNetClient,DropboxClient,FacebookClient,FtpClient,RssClient,SugarSyncClient,TwitterClient,WindowsLiveClient) Add all api to HigLabo.Net.Ftp project. Add strong name to all assembly. Add HttpBodyMultipartFormData to provide upload multipart form data with http protocol. Add HttpBodyFormUrlEncodedData to provide form url encoded post data with http protocol. FacebookClient,RssClient,WindowsLiveClient,BoxNetClient cl...AJAX Control Toolkit: September 2012 Release: AJAX Control Toolkit Release Notes - September 2012 Release Version 60919September 2012 release of the AJAX Control Toolkit. AJAX Control Toolkit .NET 4.5 – AJAX Control Toolkit for .NET 4.5 and sample site (Recommended). AJAX Control Toolkit .NET 4 – AJAX Control Toolkit for .NET 4 and sample site (Recommended). AJAX Control Toolkit .NET 3.5 – AJAX Control Toolkit for .NET 3.5 and sample site (Recommended). Notes: - The current version of the AJAX Control Toolkit is not compatible with ...Sense/Net CMS - Enterprise Content Management: SenseNet 6.1.2 Community Edition: Sense/Net 6.1.2 Community EditionMain new featuresOur current release brings a lot of bugfixes, including the resolution of js/css editing cache issues, xlsx file handling from Office, expense claim demo workspace fixes and much more. Besides fixes 6.1.2 introduces workflow start options and other minor features like a reusable Reject client button for approval scenarios and resource editor enhancements. We have also fixed an issue with our install package to bring you a flawless installation...Solution Extender for Microsoft Dynamics CRM 2011: Solution Extender (2.0.0.6): Fix a problem when serializing entity records (this fix the problem when exporting queues)Visual C++ Directories Editor: VC++ Directories 2012 Editor v1.0 ML (x32-x64): version 1.0 ML for Visual C++ 2012WinRT XAML Toolkit: WinRT XAML Toolkit - 1.2.3: WinRT XAML Toolkit based on the Windows 8 RTM SDK. Download the latest source from the SOURCE CODE page. For compiled version use NuGet. You can add it to your project in Visual Studio by going to View/Other Windows/Package Manager Console and entering: PM> Install-Package winrtxamltoolkit Features AsyncUI extensions Controls and control extensions Converters Debugging helpers Imaging IO helpers VisualTree helpers Samples Recent changes NOTE: Namespace changes DebugConsol...Python Tools for Visual Studio: 1.5 RC: PTVS 1.5RC Available! We’re pleased to announce the release of Python Tools for Visual Studio 1.5 RC. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including CPython/IronPython, Edit/Intellisense/Debug/Profile, Cloud, HPC, IPython, etc. support. The primary new feature for the 1.5 release is Django including Azure support! The http://www.djangoproject.com is a pop...Launchbar: Lanchbar 4.0.0: This application requires .NET 4.5 which you can find here: www.microsoft.com/visualstudio/downloadsAssaultCube Reloaded: 2.5.4 -: Linux has Ubuntu 11.10 32-bit precompiled binaries and Ubuntu 10.10 64-bit precompiled binaries, but you can compile your own as it also contains the source. If you are using Mac or other operating systems, please wait while we try to package for those OSes. Try to compile it. If it fails, download a virtual machine. The server pack is ready for both Windows and Linux, but you might need to compile your own for Linux (source included) Changelog: New logo Improved airstrike! Reset nukes...Extended WPF Toolkit: Extended WPF Toolkit - 1.7.0: Want an easier way to install the Extended WPF Toolkit?The Extended WPF Toolkit is available on Nuget. What's new in the 1.7.0 Release?New controls Zoombox Pie New features / bug fixes PropertyGrid.ShowTitle property added to allow showing/hiding the PropertyGrid title. Modifications to the PropertyGrid.EditorDefinitions collection will now automatically be applied to the PropertyGrid. Modifications to the PropertyGrid.PropertyDefinitions collection will now be reflected automaticaly...New ProjectsAffine transformations (Iterated function system): Small app for generating fractals using iterated function system.aspnet mvc store: Lite ASP.NET MVC CMSAugmented Reality: .Autocomplete: AutocompleteBCS to provide stock information in SharePoint 2013: This .Net assembly BCS external system provides live, read only data on Dow Jones 30 stocks details from MSN money webservices.Blood Alcohol Measurement Tool: Az alkalmazás kijelzi a felhasználó véralkoholszint változását az elfogyasztott alkoholos italok függvényében.Busqueda Incremental con un TEXTBOX: Hola, aqui estoy de nuevo con un aporte mas para la comunidad, en muchos foros he visto que estan buscando como hacer una busqueda incremental en un TEXTBOX.CRM 2011: Reassign or Transfer Personal Views: This Project allows CRM Administrator to quickly transfer (i.e. assign) advanced find views from one CRM user to another CRM user. ctripITSM doc: this is a documentation share for ctripITSM projectet Sprint 3: etsprint3Finance App for Windows 8: This is an WinJS Windows 8 application that computes various financial metrics.gadgets: Windows Sidebar Gargetsjprj: jprjKerosene ORM: Kerosene is a self-adaptive and configuration-less ORM library, with a SQL syntax based on C# dynamics, WCF, and Entity Framework capabilities for POCO objects.Lobster: ?? ?? ?????????.My Google Map: MyGoogleMap est un outils de génération de carte. Onestop.Contrib.CustomAdmin: Onestop.Contrib.CustomAdmin is a Theme for Orchard CMS providing for changing the admin dashboard elements such as Title and Logo.Onestop.Contrib.Disqus: Onestop.Contrib.Disqus is an advanced commenting module for Orchard CMS that uses Disqus.Onestop.Contrib.LayoutSelector: Onestop.Contrib.LayoutSelector is a simple part for switching to different versions of Layout.cshtml when editing Orchard content items.Onestop.Contrib.Navigation: Onestop.Contrib.Navigation is an advanced Menu Management system designed for Orchard CMS. Onestop.Contrib.Seo: Onestop.Contrib.Seo is an advanced Search Engine Optimization module for Orchard CMSOnestop.Contrib.SlideShow: Onestop.Contrib.SlideShow is an advanced module for managing slide animations on a page.pf2012: Simple HTML5 game as PF2012 electronic greeting.PHP-2012: this is for php for schoolPruebaProyecto: Carmen Asencio AmbrosioPulawJS: MVC Platform for JavaScript. Inspired by Zend FrameworkRevolution Emulator: Habbo Hotel flash emulator targeting the .NET 4.5 VM, written in C#.Ruby Rookie: This Project is for learning Ruby purposesSISLOG_Proy2: SISLOGSkyShellEx: SkyShellEx allows to sync any folder to SkyDrive via a simple ShellExtension. The sync option appears on the context menu of folders where applicable. sosoft: Sosoft Project.C# WinForm.Include Alarm Clock.sound9: sound9testddgit09242012: dTFS Agile Work Item Rollover: This is a command line utility used to rollover incomplete work from one sprint to the next. The tool has both interactive and silent modes, allowing you to seTFS Deployment Studio: Helps deploying applications built using TFS to the servers where they belong.TreeView In-place Editing in MVVM: This project demonstrates a clean way of doing the in-place editing in the WPF TreeView controlUniSoft: Teste source controlValidation Framework for .NET: Framework for validation of method paramters and return values.WarOfDev: war of developer, make your coding interesting . Waterhouse: A C# console application that takes various text inputs and converts it to Morse Code by blinking the numlock indicator.Web Package Pro: in dev

  Read the article

• How to Play PC Games on Your TV

  - by Chris Hoffman

  No need to wait for Valve’s Steam Machines — connect your Windows gaming PC to your TV and use powerful PC graphics in the living room today. It’s easy — you don’t need any unusual hardware or special software. This is ideal if you’re already a PC gamer who wants to play your games on a larger screen. It’s also convenient if you want to play multiplayer PC games with controllers in your living rom. HDMI Cables and Controllers You’ll need an HDMI cable to connect your PC to your television. This requires a TV with HDMI-in, a PC with HDMI-out, and an HDMI cable. Modern TVs and PCs have had HDMI built in for years, so you should already be good to go. If you don’t have a spare HDMI cable lying around, you may have to buy one or repurpose one of your existing HDMI cables. Just don’t buy the expensive HDMI cables — even a cheap HDMI cable will work just as well as a more expensive one. Plug one end of the HDMI cable into the HDMI-out port on your PC and one end into the HDMI-In port on your TV. Switch your TV’s input to the appropriate HDMI port and you’ll see your PC’s desktop appear on your TV.  Your TV becomes just another external monitor. If you have your TV and PC far away from each other in different rooms, this won’t work. If you have a reasonably powerful laptop, you can just plug that into your TV — or you can unplug your desktop PC and hook it up next to your TV. Now you’ll just need an input device. You probably don’t want to sit directly in front of your TV with a wired keyboard and mouse! A wireless keyboard and wireless mouse can be convenient and may be ideal for some games. However, you’ll probably want a game controller like console players use. Better yet, get multiple game controllers so you can play local-multiplayer PC games with other people. The Xbox 360 controller is the ideal controller for PC gaming. Windows supports these controllers natively, and many PC games are designed specifically for these controllers. Note that Xbox One controllers aren’t yet supported on Windows because Microsoft hasn’t released drivers for them. Yes, you could use a third-party controller or go through the process of pairing a PlayStation controller with your PC using unofficial tools, but it’s better to get an Xbox 360 controller. Just plug one or more Xbox controllers into your PC’s USB ports and they’ll work without any setup required. While many PC games to support controllers, bear in mind that some games require a keyboard and mouse. A TV-Optimized Interface Use Steam’s Big Picture interface to more easily browse and launch games. This interface was designed for using on a television with controllers and even has an integrated web browser you can use with your controller. It will be used on the Valve’s Steam Machine consoles as the default TV interface. You can use a mouse with it too, of course. There’s also nothing stopping you from just using your Windows desktop with a mouse and keyboard — aside from how inconvenient it will be. To launch Big Picture Mode, open Steam and click the Big Picture button at the top-right corner of your screen. You can also press the glowing Xbox logo button in the middle of an Xbox 360 Controller to launch the Big Picture interface if Steam is open. Another Option: In-Home Streaming If you want to leave your PC in one room of your home and play PC games on a TV in a different room, you can consider using local streaming to stream games over your home network from your gaming PC to your television. Bear in mind that the game won’t be as smooth and responsive as it would if you were sitting in front of your PC. You’ll also need a modern router with fast wireless network speeds to keep up with the game streaming. Steam’s built-in In-Home Streaming feature is now available to everyone. You could plug a laptop with less-powerful graphics hardware into your TV and use it to stream games from your powerful desktop gaming rig. You could also use an older desktop PC you have lying around. To stream a game, log into Steam on your gaming PC and log into Steam with the same account on another computer on your home network. You’ll be able to view the library of installed games on your other PC and start streaming them. NVIDIA also has their own GameStream solution that allows you to stream games from a PC with powerful NVIDIA graphics hardware. However, you’ll need an NVIDIA Shield handheld gaming console to do this. At the moment, NVIDIA’s game streaming solution can only stream to the NVIDIA Shield. However, the NVIDIA Shield device can be connected to your TV so you can play that streaming game on your TV. Valve’s Steam Machines are supposed to bring PC gaming to the living room and they’ll do it using HDMI cables, a custom Steam controller, the Big Picture interface, and in-home streaming for compatibility with Windows games. You can do all of this yourself today — you’ll just need an Xbox 360 controller instead of the not-yet-released Steam controller. Image Credit: Marco Arment on Flickr, William Hook on Flickr, Lewis Dowling on Flickr

  Read the article

• Stand-Up Desk 2012 Update

  - by BuckWoody

  One of the more popular topics here on my technical blog doesn't have to do with technology, per-se - it's about the choice I made to go to a stand-up desk work environment. If you're interested in the history of those, check here: Stand-Up Desk Part One Stand-Up Desk Part Two I have made some changes and I was asked to post those here.Yes, I'm still standing - I think the experiment has worked well, so I'm continuing to work this way. I've become so used to it that I notice when I sit for a long time. If I'm flying, or driving a long way, or have long meetings, I take breaks to stand up and move around. That being said, I don't stand as much as I did. I started out by standing the entire day - which did not end well. As you can read in my second post, I found that sitting down for a few minutes each hour worked out much better. And over time I would say that I now stand about 70-80% of the day, depending on the day. Some days I don't even notice I'm standing, so I don't sit as often. Other days I find that I really tire quickly - so I sit more often. But in both cases, I stand more than I sit. In the first post you can read about how I used a simple coffee-table from Ikea to elevate my desktop to the right height. I then adjusted the height where I stand by using a small plastic square and some carpet. Over time I found this did not work as well as I'd like. The primary reason is that the front of these are at the same depth - so my knees would hit the desk or table when I sat down. Also, the desk was at a certain height, and I had to adjust, rather than the other way around.  Also, I like a lot of surface area on top of a desk - almost more of a table. Routing cables and wiring was a pain, and of course moving it was out of the question.   So I've changed what I use. I found a perfect solution for what I was looking for - industrial wire shelving: I bought one, built only half of it (for the right height I wanted) and arranged the shelves the way I wanted. I then got a 5'x4' piece of wood from Lowes, and mounted it to where the top was balanced, but had an over-hang  I could get my knees under easily.My wife sewed a piece of fake-leather for the top. This arrangement provides the following benefits: Very strong Rolls easily, wheels can lock to prevent rolling Long, wide shelves Wire-frame allows me to route any kind of wiring and other things all over the desk I plugged in my UPS and ran it's longer power-cable to the wall outlet. I then ran the router's LAN connection along that wire, and covered both with a large insulation sleeve. I then plugged in everything to the UPS, and routed all the wiring. I can now roll the desk almost anywhere in the room so that I can record, look out the window, get closer to or farther away from the door and more. I put a few boxes on the shelves as "drawers" and tidied that part up. Even my printer fits on a shelf. Laser-dog not included - some assembly required In the second post you can read about the bar-stool I purchased from Target for the desk. I cheaped-out on this one, and it proved to be a bad choice. Because I had to raise it so high, and was constantly sitting on it and then standing up, the gas-cylinder in it just gave out. So it became a very short stool that I ended up getting rid of. In the end, this one from Ikea proved to be a better choice: And so this arrangement is working out perfectly. I'm finding myself VERY productive this way. I hope these posts help you if you decide to try working at a stand-up desk. Although I was skeptical at first, I've found it to be a very healthy, easy way to code, design and especially present over a web-cam. It's natural to stand to speak when you're presenting, and it feels more energetic than sitting down to talk to others.

  Read the article

• What Keeps You from Changing Your Public IP Address and Wreaking Havoc on the Internet?

  - by Jason Fitzpatrick

  What exactly is preventing you (or anyone else) from changing their IP address and causing all sorts of headaches for ISPs and other Internet users? Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-driven grouping of Q&A web sites. The Question SuperUser reader Whitemage is curious about what’s preventing him from wantonly changing his IP address and causing trouble: An interesting question was asked of me and I did not know what to answer. So I’ll ask here. Let’s say I subscribed to an ISP and I’m using cable internet access. The ISP gives me a public IP address of 60.61.62.63. What keeps me from changing this IP address to, let’s say, 60.61.62.75, and messing with another consumer’s internet access? For the sake of this argument, let’s say that this other IP address is also owned by the same ISP. Also, let’s assume that it’s possible for me to go into the cable modem settings and manually change the IP address. Under a business contract where you are allocated static addresses, you are also assigned a default gateway, a network address and a broadcast address. So that’s 3 addresses the ISP “loses” to you. That seems very wasteful for dynamically assigned IP addresses, which the majority of customers are. Could they simply be using static arps? ACLs? Other simple mechanisms? Two things to investigate here, why can’t we just go around changing our addresses, and is the assignment process as wasteful as it seems? The Answer SuperUser contributor Moses offers some insight: Cable modems aren’t like your home router (ie. they don’t have a web interface with simple point-and-click buttons that any kid can “hack” into). Cable modems are “looked up” and located by their MAC address by the ISP, and are typically accessed by technicians using proprietary software that only they have access to, that only runs on their servers, and therefore can’t really be stolen. Cable modems also authenticate and cross-check settings with the ISPs servers. The server has to tell the modem whether it’s settings (and location on the cable network) are valid, and simply sets it to what the ISP has it set it for (bandwidth, DHCP allocations, etc). For instance, when you tell your ISP “I would like a static IP, please.”, they allocate one to the modem through their servers, and the modem allows you to use that IP. Same with bandwidth changes, for instance. To do what you are suggesting, you would likely have to break into the servers at the ISP and change what it has set up for your modem. Could they simply be using static arps? ACLs? Other simple mechanisms? Every ISP is different, both in practice and how close they are with the larger network that is providing service to them. Depending on those factors, they could be using a combination of ACL and static ARP. It also depends on the technology in the cable network itself. The ISP I worked for used some form of ACL, but that knowledge was a little beyond my paygrade. I only got to work with the technician’s interface and do routine maintenance and service changes. What keeps me from changing this IP address to, let’s say, 60.61.62.75 and mess with another consumer’s internet access? Given the above, what keeps you from changing your IP to one that your ISP hasn’t specifically given to you is a server that is instructing your modem what it can and can’t do. Even if you somehow broke into the modem, if 60.61.62.75 is already allocated to another customer, then the server will simply tell your modem that it can’t have it. David Schwartz offers some additional insight with a link to a white paper for the really curious: Most modern ISPs (last 13 years or so) will not accept traffic from a customer connection with a source IP address they would not route to that customer were it the destination IP address. This is called “reverse path forwarding”. See BCP 38. Have something to add to the explanation? Sound off in the the comments. Want to read more answers from other tech-savvy Stack Exchange users? Check out the full discussion thread here.     

  Read the article

• Ruby Gem LoadError mysql2/mysql2 required

  - by Kalli Dalli

  Im trying to setup my rails server on OSX 10.8 but I can't get my rails server to run. - Currently Im using a Zend Server with mysql 5.1. - I also have istalled brew and brew mysql. - And I used: gem install mysql2 -- --srcdir=/usr/local/mysql/include --with-opt-include=/usr/local/mysql/include the server worked already but now, I always get this loadError below. This is what my Gemfile says: ralphs-macbook-pro:admin-mockup zero$ bundle install Using rake (10.0.2) Using i18n (0.6.1) Using multi_json (1.3.7) Using activesupport (3.2.7) Using builder (3.0.4) Using activemodel (3.2.7) Using erubis (2.7.0) Using journey (1.0.4) Using rack (1.4.1) Using rack-cache (1.2) Using rack-test (0.6.2) Using hike (1.2.1) Using tilt (1.3.3) Using sprockets (2.1.3) Using actionpack (3.2.7) Using mime-types (1.19) Using polyglot (0.3.3) Using treetop (1.4.12) Using mail (2.4.4) Using actionmailer (3.2.7) Using arel (3.0.2) Using tzinfo (0.3.35) Using activerecord (3.2.7) Using activeresource (3.2.7) Using annotate (2.5.0) Using coffee-script-source (1.4.0) Using execjs (1.4.0) Using coffee-script (2.2.0) Using rack-ssl (1.3.2) Using json (1.7.5) Using rdoc (3.12) Using thor (0.16.0) Using railties (3.2.7) Using coffee-rails (3.2.2) Using columnize (0.3.6) Using debugger-ruby_core_source (1.1.5) Using debugger-linecache (1.1.2) Using debugger (1.2.2) Using formtastic (2.2.1) Using haml (3.1.7) Using haml-rails (0.3.5) Using hirb (0.7.0) Using hpricot (0.8.6) Using jquery-rails (2.1.4) Using kgio (2.7.4) Using mysql2 (0.3.11) Using php_serialize (1.2) Using polyamorous (0.5.0) Using rabl (0.7.8) Using railroady (1.1.0) Using bundler (1.2.3) Using rails (3.2.7) Using raindrops (0.10.0) Using randumb (0.3.0) Using sass (3.2.3) Using sass-rails (3.2.5) Using squeel (1.0.13) Using uglifier (1.3.0) Using unicorn (4.4.0) Your bundle is complete! Use `bundle show [gemname]` to see where a bundled gem is installed. And after starting rails s /Users/zero/.rvm/gems/ruby-1.9.3-p327/gems/mysql2-0.3.11/lib/mysql2.rb:9:in `require': cannot load such file -- mysql2/mysql2 (LoadError) from /Users/zero/.rvm/gems/ruby-1.9.3-p327/gems/mysql2-0.3.11/lib/mysql2.rb:9:in `<top (required)>' from /Users/zero/.rvm/gems/ruby-1.9.3-p327/gems/bundler-1.2.3/lib/bundler/runtime.rb:68:in `require' from /Users/zero/.rvm/gems/ruby-1.9.3-p327/gems/bundler-1.2.3/lib/bundler/runtime.rb:68:in `block (2 levels) in require' from /Users/zero/.rvm/gems/ruby-1.9.3-p327/gems/bundler-1.2.3/lib/bundler/runtime.rb:66:in `each' from /Users/zero/.rvm/gems/ruby-1.9.3-p327/gems/bundler-1.2.3/lib/bundler/runtime.rb:66:in `block in require' from /Users/zero/.rvm/gems/ruby-1.9.3-p327/gems/bundler-1.2.3/lib/bundler/runtime.rb:55:in `each' from /Users/zero/.rvm/gems/ruby-1.9.3-p327/gems/bundler-1.2.3/lib/bundler/runtime.rb:55:in `require' from /Users/zero/.rvm/gems/ruby-1.9.3-p327/gems/bundler-1.2.3/lib/bundler.rb:128:in `require' from /Users/zero/GitHub/admin-mockup/config/application.rb:7:in `<top (required)>' from /Users/zero/.rvm/gems/ruby-1.9.3-p327/gems/railties-3.2.7/lib/rails/commands.rb:53:in `require' from /Users/zero/.rvm/gems/ruby-1.9.3-p327/gems/railties-3.2.7/lib/rails/commands.rb:53:in `block in <top (required)>' from /Users/zero/.rvm/gems/ruby-1.9.3-p327/gems/railties-3.2.7/lib/rails/commands.rb:50:in `tap' from /Users/zero/.rvm/gems/ruby-1.9.3-p327/gems/railties-3.2.7/lib/rails/commands.rb:50:in `<top (required)>' from script/rails:6:in `require' from script/rails:6:in `<main>' Thx for any help!

  Read the article

• Computer Networks UNISA - Chap 15 &ndash; Network Management

  - by MarkPearl

  After reading this section you should be able to Understand network management and the importance of documentation, baseline measurements, policies, and regulations to assess and maintain a network’s health. Manage a network’s performance using SNMP-based network management software, system and event logs, and traffic-shaping techniques Identify the reasons for and elements of an asset managements system Plan and follow regular hardware and software maintenance routines Fundamentals of Network Management Network management refers to the assessment, monitoring, and maintenance of all aspects of a network including checking for hardware faults, ensuring high QoS, maintaining records of network assets, etc. Scope of network management differs depending on the size and requirements of the network. All sub topics of network management share the goals of enhancing the efficiency and performance while preventing costly downtime or loss. Documentation The way documentation is stored may vary, but to adequately manage a network one should at least record the following… Physical topology (types of LAN and WAN topologies – ring, star, hybrid) Access method (does it use Ethernet 802.3, token ring, etc.) Protocols Devices (Switches, routers, etc) Operating Systems Applications Configurations (What version of operating system and config files for serve / client software) Baseline Measurements A baseline is a report of the network’s current state of operation. Baseline measurements might include the utilization rate for your network backbone, number of users logged on per day, etc. Baseline measurements allow you to compare future performance increases or decreases caused by network changes or events with past network performance. Obtaining baseline measurements is the only way to know for certain whether a pattern of usage has changed, or whether a network upgrade has made a difference. There are various tools available for measuring baseline performance on a network. Policies, Procedures, and Regulations Following rules helps limit chaos, confusion, and possibly downtime. The following policies and procedures and regulations make for sound network management. Media installations and management (includes designing physical layout of cable, etc.) Network addressing policies (includes choosing and applying a an addressing scheme) Resource sharing and naming conventions (includes rules for logon ID’s) Security related policies Troubleshooting procedures Backup and disaster recovery procedures In addition to internal policies, a network manager must consider external regulatory rules. Fault and Performance Management After documenting every aspect of your network and following policies and best practices, you are ready to asses you networks status on an on going basis. This process includes both performance management and fault management. Network Management Software To accomplish both fault and performance management, organizations often use enterprise-wide network management software. There various software packages that do this, each collect data from multiple networked devices at regular intervals, in a process called polling. Each managed device runs a network management agent. So as not to affect the performance of a device while collecting information, agents do not demand significant processing resources. The definition of a managed devices and their data are collected in a MIB (Management Information Base). Agents communicate information about managed devices via any of several application layer protocols. On modern networks most agents use SNMP which is part of the TCP/IP suite and typically runs over UDP on port 161. Because of the flexibility and sophisticated network management applications are a challenge to configure and fine-tune. One needs to be careful to only collect relevant information and not cause performance issues (i.e. pinging a device every 5 seconds can be a problem with thousands of devices). MRTG (Multi Router Traffic Grapher) is a simple command line utility that uses SNMP to poll devices and collects data in a log file. MRTG can be used with Windows, UNIX and Linux. System and Event Logs Virtually every condition recognized by an operating system can be recorded. This is typically done using event logs. In Windows there is a GUI event log viewer. Similar information is recorded in UNIX and Linux in a system log. Much of the information collected in event logs and syslog files does not point to a problem, even if it is marked with a warning so it is important to filter your logs appropriately to reduce the noise. Traffic Shaping When a network must handle high volumes of network traffic, users benefit from performance management technique called traffic shaping. Traffic shaping involves manipulating certain characteristics of packets, data streams, or connections to manage the type and amount of traffic traversing a network or interface at any moment. Its goals are to assure timely delivery of the most important traffic while offering the best possible performance for all users. Several types of traffic prioritization exist including prioritizing traffic according to any of the following characteristics… Protocol IP address User group DiffServr VLAN tag in a Data Link layer frame Service or application Caching In addition to traffic shaping, a network or host might use caching to improve performance. Caching is the local storage of frequently needed files that would otherwise be obtained from an external source. By keeping files close to the requester, caching allows the user to access those files quickly. The most common type of caching is Web caching, in which Web pages are stored locally. To an ISP, caching is much more than just convenience. It prevents a significant volume of WAN traffic, thus improving performance and saving money. Asset Management Another key component in managing networks is identifying and tracking its hardware. This is called asset management. The first step to asset management is to take an inventory of each node on the network. You will also want to keep records of every piece of software purchased by your organization. Asset management simplifies maintaining and upgrading the network chiefly because you know what the system includes. In addition, asset management provides network administrators with information about the costs and benefits of certain types of hardware or software. Change Management Networks are always in a stage of flux with various aspects including… Software changes and patches Client Upgrades Shared Application Upgrades NOS Upgrades Hardware and Physical Plant Changes Cabling Upgrades Backbone Upgrades For a detailed explanation on each of these read the textbook (Page 750 – 761)

  Read the article

• Can't control connection bit rate using iwconfig with Atheros TL-WN821N (AR7010)

  - by Paul H

  I'm trying to reduce the connection bit rate on my Atheros TP-Link TL-WN821N v3 usb wifi adapter due to frequent instability issues (reported connection speed goes down to 1Mb/s and I have to physically reconnect the adapter to regain a connection). I know this is a common problem with this device, and I have tried everything I can think of to fix it, including using drivers from linux-backports; compiling and installing a custom firmware (following instructions on https://wiki.debian.org/ath9k_htc#fw-free) and (as a last resort) using ndiswrapper. When using ndiswrapper, the wifi adapter is stable and operates in g mode at 54Mb/s (whilst when using the default ath9k_htc module, the adapter connects in n mode and the bit rate fluctuates constantly). Unfortunately, with this setup I have to run my processor using only one core, since using SMP with ndiswrapper causes a kernel oops on my system. So I want to lock my bit rate to 54Mb/s (or less, if need be) for connection stability, using the ath9k_htc module. I've tried 'sudo iwconfig wlan0 rate 54M'; the command runs with no error but when I check the bit rate with 'sudo iwlist wlan0 bitrate' the command returns: wlan0 unknown bit-rate information. Current Bit Rate:78 Mb/s Any ideas? Here's some info (hopefully relevant) on my setup: Xubuntu (12.04.3) 64bit (kernel 3.2.0-55.85-generic) using Network Manager. My Router is from Virgin Media, the VMDG480. lshw -C network : *-network description: Wireless interface physical id: 1 bus info: usb@1:4 logical name: wlan0 serial: 74:ea:3a:8f:16:b6 capabilities: ethernet physical wireless configuration: broadcast=yes driver=ath9k_htc driverversion=3.2.0-55 firmware=1.3 ip=192.168.0.9 link=yes multicast=yes wireless=IEEE 802.11bgn lsusb -v: Bus 001 Device 003: ID 0cf3:7015 Atheros Communications, Inc. TP-Link TL-WN821N v3 802.11n [Atheros AR7010+AR9287] Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 255 Vendor Specific Subclass bDeviceProtocol 255 Vendor Specific Protocol bMaxPacketSize0 64 idVendor 0x0cf3 Atheros Communications, Inc. idProduct 0x7015 TP-Link TL-WN821N v3 802.11n [Atheros AR7010+AR9287] bcdDevice 2.02 iManufacturer 16 ATHEROS iProduct 32 UB95 iSerial 48 12345 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 60 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 6 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x06 EP 6 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 255 Vendor Specific Subclass bDeviceProtocol 255 Vendor Specific Protocol bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) iwlist wlan0 scanning: wlan0 Scan completed : Cell 01 - Address: C4:3D:C7:3A:1F:5D Channel:1 Frequency:2.412 GHz (Channel 1) Quality=37/70 Signal level=-73 dBm Encryption key:on ESSID:"my essid" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s Mode:Master Extra:tsf=00000070cca77186 Extra: Last beacon: 5588ms ago IE: Unknown: 0007756E69636F726E IE: Unknown: 010882848B962430486C IE: Unknown: 030101 IE: Unknown: 2A0100 IE: Unknown: 2F0100 IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: 32040C121860 IE: Unknown: 2D1AFC181BFFFF000000000000000000000000000000000000000000 IE: Unknown: 3D1601080400000000000000000000000000000000000000 IE: Unknown: DD7E0050F204104A0001101044000102103B00010310470010F99C335D7BAC57FB00137DFA79600220102100074E657467656172102300074E6574676561721024000631323334353610420007303030303030311054000800060050F20400011011000743473331303144100800022008103C0001011049000600372A000120 IE: Unknown: DD090010180203F02C0000 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00 iwconfig: lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"my essid" Mode:Managed Frequency:2.412 GHz Access Point: C4:3D:C7:3A:1F:5D Bit Rate=78 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=36/70 Signal level=-74 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0,

  Read the article

• Trying to reinvent the wheel of StackOverflow to have a good learning experience. Need some suggesti

  - by Legend

  I want to learn and am not able to do it unless I have a real "mission" to complete. SO is my favorite and I can't imagine a better experience than actually recreating it but not in ASP. I'd like to use PHP+MySQL+jQuery. So far, I have been a self-taught programmer but I would like to master one paradigm that forces you to adhere to the standards. For instance, recently, jQuery forced me to use some "rules". The plugins were supposed to be written in a particular way and that's it. When I started off, everything seemed like Greek and Latin but when I finished a very small plugin, I felt really happy because it forced me to program in a certain way. I am looking for something like this only in a larger project. I've heard a lot about MVC and all but I am confused about the various frameworks out there. Zend seems awesome but looks heavy at the same time and also requires you to have a lot more control over the web-server whereas CakePHP is a good and a fast framework that needs only little control. Do I use one of these or just write my own MVC? I have the following goals: Goals: Site should be fast - I know this depends on my coding skills but I will learn on my way. The framework itself should not slow me down) Setting up the site should not require you to use command-line - This requirement is ok during development. But some frameworks like Symphony require you to initialize certain things through command-line Should support pluggable modules - For instance, if I want to be able to use the FCK editor, I should be able to organize things in a good way. Should be possible to extend - For instance, SO is mainly a Q&A site but I should be able to logically extend it into an Idea Management System (optional but I'm curious). This goes more into code re-usability I guess. I am comfortable with MySQL so I should be done with database design etc. with some serious effort. As for PHP, I can write code on my own but haven't really used any frameworks that much. jQuery, I started off recently and love it. I would be glad if someone can guide me during these initial steps. Precisely, when designing something like SO, I have the following questions: Do I use a framework? If yes, should it be MVC? If MVC, which one is a good and a scalable one? (I'd love something like jQuery that will not die anytime soon) How do I balance the functionality? The same logic can sometimes be made server centric or client centric. (more Ajax?). Is it a good idea to make a heavy javascript site considering the recent advances on client-side JS processing? Just in case anyone is wondering, I am not interested in commercializing any of this. I need a reason to learn something :)

  Read the article

• Trying to update debian not working

  - by Sean

  As root i type this command apt-get update and get these error messages. > Err http://security.debian.org lenny/updates Release.gpg Could not resolve 'security.debian.org' Err http://security.debian.org lenny/updates/main Translation-en_US Could not resolve 'security.debian.org' Err http://security.debian.org lenny/updates/contrib Translation-en_US Could not resolve 'security.debian.org' Err http://security.debian.org lenny/updates/non-free Translation-en_US Could not resolve 'security.debian.org' Err http://www.backports.org lenny-backports Release.gpg Could not resolve 'www.backports.org' Err http://www.backports.org lenny-backports/main Translation-en_US Could not resolve 'www.backports.org' Err http://www.backports.org lenny-backports/contrib Translation-en_US Could not resolve 'www.backports.org' Err http://www.backports.org lenny-backports/non-free Translation-en_US Could not resolve 'www.backports.org' Err http://ftp.us.debian.org lenny Release.gpg Could not resolve 'ftp.us.debian.org' Err http://ftp.us.debian.org lenny/main Translation-en_US Could not resolve 'ftp.us.debian.org' Err http://ftp.us.debian.org lenny/contrib Translation-en_US Could not resolve 'ftp.us.debian.org' Err http://ftp.us.debian.org lenny/non-free Translation-en_US Could not resolve 'ftp.us.debian.org' Err http://http.us.debian.org stable Release.gpg Could not resolve 'http.us.debian.org' Err http://http.us.debian.org stable/main Translation-en_US Could not resolve 'http.us.debian.org' Err http://http.us.debian.org stable/contrib Translation-en_US Could not resolve 'http.us.debian.org' Err http://http.us.debian.org stable/non-free Translation-en_US Could not resolve 'http.us.debian.org' Reading package lists... Done W: Failed to fetch http://ftp.us.debian.org/debian/dists/lenny/Release.gpg Could not resolve 'ftp.us.debian.org' W: Failed to fetch http://ftp.us.debian.org/debian/dists/lenny/main/i18n/Translation-en_US.gz Could not resolve 'ftp.us.debian.org' W: Failed to fetch http://ftp.us.debian.org/debian/dists/lenny/contrib/i18n/Translation-en_US.gz Could not resolve 'ftp.us.debian.org' W: Failed to fetch http://ftp.us.debian.org/debian/dists/lenny/non-free/i18n/Translation-en_US.gz Could not resolve 'ftp.us.debian.org' W: Failed to fetch http://http.us.debian.org/debian/dists/stable/Release.gpg Could not resolve 'http.us.debian.org' W: Failed to fetch http://http.us.debian.org/debian/dists/stable/main/i18n/Translation-en_US.gz Could not resolve 'http.us.debian.org' W: Failed to fetch http://http.us.debian.org/debian/dists/stable/contrib/i18n/Translation-en_US.gz Could not resolve 'http.us.debian.org' W: Failed to fetch http://http.us.debian.org/debian/dists/stable/non-free/i18n/Translation-en_US.gz Could not resolve 'http.us.debian.org' W: Failed to fetch http://security.debian.org/dists/lenny/updates/Release.gpg Could not resolve 'security.debian.org' W: Failed to fetch http://security.debian.org/dists/lenny/updates/main/i18n/Translation-en_US.gz Could not resolve 'security.debian.org' W: Failed to fetch http://security.debian.org/dists/lenny/updates/contrib/i18n/Translation-en_US.gz Could not resolve 'security.debian.org' W: Failed to fetch http://security.debian.org/dists/lenny/updates/non-free/i18n/Translation-en_US.gz Could not resolve 'security.debian.org' W: Failed to fetch http://www.backports.org/debian/dists/lenny-backports/Release.gpg Could not resolve 'www.backports.org' W: Failed to fetch http://www.backports.org/debian/dists/lenny-backports/main/i18n/Translation-en_US.gz Could not resolve 'www.backports.org' W: Failed to fetch http://www.backports.org/debian/dists/lenny-backports/contrib/i18n/Translation-en_US.gz Could not resolve 'www.backports.org' W: Failed to fetch http://www.backports.org/debian/dists/lenny-backports/non-free/i18n/Translation-en_US.gz Could not resolve 'www.backports.org' W: Some index files failed to download, they have been ignored, or old ones used instead. W: You may want to run apt-get update to correct these problems This is on a dreamplug linux server. Configured so that my network starts on 192.168.1.2 and my router is port forwarding ssh to 192.168.1.6 to the server.

  Read the article

• Trouble with dns and debian update

  - by Sean

  I tried to update my debian dreamplug server with the command running as root apt-get update and recieved these errors. Err http://security.debian.org lenny/updates Release.gpg Could not resolve 'security.debian.org' Err htdtp://security.debian.org lenny/updates/main Translation-en_US Could not resolve 'security.debian.org' Err htdtp://security.debian.org lenny/updates/contrib Translation-en_US Could not resolve 'security.debian.org' Err htdtp://security.debian.org lenny/updates/non-free Translation-en_US Could not resolve 'security.debian.org' Err httdp://www.backports.org lenny-backports Releasegpg Could not resolve 'www.backports.org' Err httdp://www.backports.org lenny-backports/main Translation-en_US Could not resolve 'www.backports.org' Err httdp://www.backports.org lenny-backports/contrib Translation-en_US Could not resolve 'www.backports.org' Err httdp://www.backports.org lenny-backports/non-free Translation-en_US Could not resolve 'www.backports.org' Err httdp://ftp.us.debian.org lenny Release.gpg Could not resolve 'ftp.us.debian.org' Err httdp://ftp.us.debian.org lenny/main Translation-en_US Could not resolve 'ftp.us.debian.org' Err httdp://ftp.us.debian.org lenny/contrib Translation-en_US Could not resolve 'ftp.us.debian.org' Err httdp://ftp.us.debian.org lenny/non-free Translation-en_US Could not resolve 'ftp.us.debian.org' Err httdp://http.us.debian.org stable Release.gpg Could not resolve 'http.us.debian.org' Err htdtp://http.us.debian.org stable/main Translation-en_US Could not resolve 'http.us.debian.org' Err httdp://http.us.debian.org stable/contrib Translation-en_US Could not resolve 'http.us.debian.org' Err htdtp://http.us.debian.org stable/non-free Translation-en_US Could not resolve 'http.us.debian.org' Reading package lists... Done W: Failed to fetch ttp://ftp.us.debian.org/debian/dists/lenny/Release.gpg Could not resolve 'ftp.us.debian.org' W: Failed to fetch ttp://ftp.us.debian.org/debian/dists/lenny/main/i18n/Translation-en_US.gz Could not resolve 'ftp.us.debian.org' W: Failed to fetch ttp://ftp.us.debian.org/debian/dists/lenny/contrib/i18n/Translation-en_US.gz Could not resolve 'ftp.us.debian.org' W: Failed to fetch ttp://ftp.us.debian.org/debian/dists/lenny/non-free/i18n/Translation-en_US.gz Could not resolve 'ftp.us.debian.org' W: Failed to fetch ttp://http.us.debian.org/debian/dists/stable/Release.gpg Could not resolve 'http.us.debian.org' W: Failed to fetch ttp://http.us.debian.org/debian/dists/stable/main/i18n/Translation-en_US.gz Could not resolve 'http.us.debian.org' W: Failed to fetch ttp://http.us.debian.org/debian/dists/stable/contrib/i18n/Translation-en_US.gz Could not resolve 'http.us.debian.org' W: Failed to fetch ttp://http.us.debian.org/debian/dists/stable/non-free/i18n/Translation-en_US.gz Could not resolve 'http.us.debian.org' W: Failed to fetch ttp://security.debian.org/dists/lenny/updates/Release.gpg Could not resolve 'security.debian.org' W: Failed to fetch ttp://security.debian.org/dists/lenny/updates/main/i18n/Translation-en_US.gz Could not resolve 'security.debian.org' W: Failed to fetch ttp://security.debian.org/dists/lenny/updates/contrib/i18n/Translation-en_US.gz Could not resolve 'security.debian.org' W: Failed to fetch ttp://security.debian.org/dists/lenny/updates/non-free/i18n/Translation-en_US.gz Could not resolve 'security.debian.org' W: Failed to fetch ttp://www.backports.org/debian/dists/lenny-backports/Release.gpg Could not resolve 'www.backports.org' W: Failed to fetch ttp://www.backports.org/debian/dists/lenny-backports/main/i18n/Translation-en_US.gz Could not resolve 'www.backports.org' W: Failed to fetch ttp://www.backports.org/debian/dists/lenny-backports/contrib/i18n/Translation-en_US.gz Could not resolve 'www.backports.org' W: Failed to fetch ttp://www.backports.org/debian/dists/lenny-backports/non-free/i18n/Translation-en_US.gz Could not resolve 'www.backports.org' W: Some index files failed to download, they have been ignored, or old ones used instead. W: You may want to run apt-get update to correct these problems I am able to ping ip addresses but not namespaces. Can't seem to figure out the problem. My /etc/resolv.conf file contains nameserver 192.168.1.2 which is my router.

  Read the article

• Setting up Edimax EW-7206APg as Universal Repeater

  - by Ondra Žižka

  Hi, I've troubles setting up Edimax EW-7206APg as a Universal Repeater. I've read few manuals, but they are unclear on certain points. I've managed the repeater to get to a state when it's in a "connected" state. I've set the same WPA passphrase as the router has because I haven't seen any other place to set it at. These are my settings: System Uptime 0day:1h:33m:11s Hardware Version Rev. A Runtime Code Version 1.32 Wireless Configuration Mode Universal Repeater ESSID edimax Channel Number 6 Security WPA-shared key BSSID 00:c0:9f:40:bd:38 Associated Clients 0 Wireless Repeater Interface Configuration ESSID Dusan Security WPA BSSID 00:4f:62:23:8f:7e State Connected LAN Configuration IP Address 192.168.0.10 Subnet Mask 255.255.255.0 Default Gateway 192.168.0.1 MAC Address 00:c0:9f:40:bd:37 This is ipconfig /all: Prípona DNS podle pripojení . . . : riomail.cz Popis . . . . . . . . . . . . . . : Intel(R) PRO/Wireless 2200BG Network Connection Fyzická Adresa. . . . . . . . . . : 00-0E-35-3D-77-68 Protokol DHCP povolen . . . . . . : Ano Automatická konfigurace povolena : Ano Adresa IP . . . . . . . . . . . . : 192.168.0.5 Maska podsíte . . . . . . . . . . : 255.255.255.0 Výchozí brána . . . . . . . . . . : 192.168.0.1 Server DHCP . . . . . . . . . . . : 192.168.0.1 Servery DNS . . . . . . . . . . . : 94.74.192.252 94.74.192.244 I can ping the repeater, I can ping the root AP, but not a DNS server or any other IP beyond the root AP. Anyone has an idea what's wrong? Thanks, Ondra

  Read the article

• ERR_INCOMPLETE_CHUNKED_ENCODING apache 2.4

  - by Bujanca Mihai

  I upgraded my Ubuntu server to 14.04 and Apache 2.4.7. Now my images don't load and console yields net::ERR_INCOMPLETE_CHUNKED_ENCODING. Also, I can sometimes see some of the images load for a little while (1 sec max) and then they disappear. .htaccess RewriteEngine On # Serve the favicon file from img folder RewriteCond %{REQUEST_URI} ^/favicon.ico$ RewriteRule ^(.*)$ /img/$1 [NC,L] # Redirect HTTP traffic to WWW subdomain RewriteCond %{HTTPS} off [NC] RewriteCond %{HTTP_HOST} !^www\. [NC] RewriteRule ^(.*)$ http://www.%{HTTP_HOST}/$1 [R=301,L] # Redirect HTTPS traffic to WWW subdomain RewriteCond %{HTTPS} on [NC] RewriteCond %{HTTP_HOST} !^www\. [NC] RewriteRule ^(.*)$ https://www.%{HTTP_HOST}/$1 [R=301,L] # Auto Versioning rules RewriteCond %{REQUEST_FILENAME} !-s RewriteRule ^(.*)\.[\d]+\.(css|js)$ $1.$2 [L] # Default Zend rewrite rules RewriteCond %{REQUEST_FILENAME} -s [OR] RewriteCond %{REQUEST_FILENAME} -l [OR] RewriteCond %{REQUEST_FILENAME} -d RewriteRule ^.*$ - [NC,L] RewriteRule ^.*$ index.php [NC,L] VHost <VirtualHost *:80> ServerAdmin admin@localhost ServerName localhost DocumentRoot /home/mihai/ARTD/www/public/website # Omit this in production environment SetEnv APPLICATION_ENV local <Directory /home/mihai/ARTD/www/public/website > Options Indexes FollowSymLinks MultiViews AllowOverride All #Order deny,allow #Allow from all Require all granted </Directory> <IfModule mod_php5.c> php_value memory_limit 128M php_value upload_max_filesize 20M php_value post_max_size 20M </IfModule> ErrorLog /var/log/apache2/ARTD-error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/ARTD-access.log combined </VirtualHost> <IfModule mod_ssl.c> <VirtualHost *:443> ServerAdmin admin@localhost ServerName localhost DocumentRoot /home/mihai/ARTD/www/public/website # Omit this in production environment SetEnv APPLICATION_ENV local <Directory /home/mihai/ARTD/www/public/website > Options Indexes FollowSymLinks MultiViews AllowOverride All #Order deny,allow #Allow from all Require all granted </Directory> <IfModule mod_php5.c> php_value memory_limit 128M php_value upload_max_filesize 20M php_value post_max_size 20M </IfModule> ErrorLog /var/log/apache2/ARTD-ssl-error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/ARTD.log combined # SSL Engine Switch: # Enable/Disable SSL for this virtual host. SSLEngine on # A self-signed (snakeoil) certificate can be created by installing # the ssl-cert package. See # /usr/share/doc/apache2.2-common/README.Debian.gz for more info. # If both key and certificate are stored in the same file, only the # SSLCertificateFile directive is needed. SSLCertificateFile /etc/ssl/certs/ssl-cert-snakeoil.pem SSLCertificateKeyFile /etc/ssl/private/ssl-cert-snakeoil.key # Server Certificate Chain: # Point SSLCertificateChainFile at a file containing the # concatenation of PEM encoded CA certificates which form the # certificate chain for the server certificate. Alternatively # the referenced file can be the same as SSLCertificateFile # when the CA certificates are directly appended to the server # certificate for convinience. #SSLCertificateChainFile /etc/apache2/ssl.crt/server-ca.crt # Certificate Authority (CA): # Set the CA certificate verification path where to find CA # certificates for client authentication or alternatively one # huge file containing all of them (file must be PEM encoded) # Note: Inside SSLCACertificatePath you need hash symlinks # to point to the certificate files. Use the provided # Makefile to update the hash symlinks after changes. #SSLCACertificatePath /etc/ssl/certs/ #SSLCACertificateFile /etc/apache2/ssl.crt/ca-bundle.crt # Certificate Revocation Lists (CRL): # Set the CA revocation path where to find CA CRLs for client # authentication or alternatively one huge file containing all # of them (file must be PEM encoded) # Note: Inside SSLCARevocationPath you need hash symlinks # to point to the certificate files. Use the provided # Makefile to update the hash symlinks after changes. #SSLCARevocationPath /etc/apache2/ssl.crl/ #SSLCARevocationFile /etc/apache2/ssl.crl/ca-bundle.crl # Client Authentication (Type): # Client certificate verification type and depth. Types are # none, optional, require and optional_no_ca. Depth is a # number which specifies how deeply to verify the certificate # issuer chain before deciding the certificate is not valid. #SSLVerifyClient require #SSLVerifyDepth 10 # Access Control: # With SSLRequire you can do per-directory access control based # on arbitrary complex boolean expressions containing server # variable checks and other lookup directives. The syntax is a # mixture between C and Perl. See the mod_ssl documentation # for more details. #<Location /> #SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \ # and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \ # and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \ # and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \ # and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \ # or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/ #</Location> # SSL Engine Options: # Set various options for the SSL engine. # o FakeBasicAuth: # Translate the client X.509 into a Basic Authorisation. This means that # the standard Auth/DBMAuth methods can be used for access control. The # user name is the `one line' version of the client's X.509 certificate. # Note that no password is obtained from the user. Every entry in the user # file needs this password: `xxj31ZMTZzkVA'. # o ExportCertData: # This exports two additional environment variables: SSL_CLIENT_CERT and # SSL_SERVER_CERT. These contain the PEM-encoded certificates of the # server (always existing) and the client (only existing when client # authentication is used). This can be used to import the certificates # into CGI scripts. # o StdEnvVars: # This exports the standard SSL/TLS related `SSL_*' environment variables. # Per default this exportation is switched off for performance reasons, # because the extraction step is an expensive operation and is usually # useless for serving static content. So one usually enables the # exportation for CGI and SSI requests only. # o StrictRequire: # This denies access when "SSLRequireSSL" or "SSLRequire" applied even # under a "Satisfy any" situation, i.e. when it applies access is denied # and no other module can change it. # o OptRenegotiate: # This enables optimized SSL connection renegotiation handling when SSL # directives are used in per-directory context. #SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire #<FilesMatch "\.(cgi|shtml|phtml|php)$"> # SSLOptions +StdEnvVars #</FilesMatch> # SSL Protocol Adjustments: # The safe and default but still SSL/TLS standard compliant shutdown # approach is that mod_ssl sends the close notify alert but doesn't wait for # the close notify alert from client. When you need a different shutdown # approach you can use one of the following variables: # o ssl-unclean-shutdown: # This forces an unclean shutdown when the connection is closed, i.e. no # SSL close notify alert is send or allowed to received. This violates # the SSL/TLS standard but is needed for some brain-dead browsers. Use # this when you receive I/O errors because of the standard approach where # mod_ssl sends the close notify alert. # o ssl-accurate-shutdown: # This forces an accurate shutdown when the connection is closed, i.e. a # SSL close notify alert is send and mod_ssl waits for the close notify # alert of the client. This is 100% SSL/TLS standard compliant, but in # practice often causes hanging connections with brain-dead browsers. Use # this only for browsers where you know that their SSL implementation # works correctly. # Notice: Most problems of broken clients are also related to the HTTP # keep-alive facility, so you usually additionally want to disable # keep-alive for those clients, too. Use variable "nokeepalive" for this. # Similarly, one has to force some clients to use HTTP/1.0 to workaround # their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and # "force-response-1.0" for this. #BrowserMatch ".*MSIE.*" \ # nokeepalive ssl-unclean-shutdown \ # downgrade-1.0 force-response-1.0 </VirtualHost> </IfModule> logs Apache/2.4.7 (Ubuntu) PHP/5.5.9-1ubuntu4.3 OpenSSL/1.0.1f (internal dummy connection) 127.0.0.1 - - [25/Aug/2014:13:09:53 +0300] "GET /img/header/top-nav-separator.png HTTP/1.1" 200 462 "https://localhost/art" "Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/34.0.1847.132 Safari/537.36"

  Read the article

• Cannot turn on "Network Discovery and File Sharing" when Windows Firewall is enabled

  - by Cheeso

  I have a problem similar to this one. Windows Firewall prevents File and Printer sharing from working and Why does File and Printer Sharing keep turning off in Windows 7? I cannot turn on Network Discovery. This is Windows 7 Home Premium, x64. It's a Dell XPS 1340 and Windows came installed from the OEM. This used to work. Now it doesn't. I don't know what has changed. In windows Explorer, the UI looks like this: When I click the yellow panel that says "Click to change...", the panel disappears, then immediately reappears, with exactly the same text. If I go through the control panel "Network and Sharing Center" thing, the UI looks like this: If I tick the box to "turn on network discovery", the "Save Changes" button becomes enabled. If I then click that button, the dialog box just closes, with no message or confirmation. Re-opening the same dialog box shows that Network Discovery has not been turned on. If I turn off Windows Firewall, I can then turn on Network Discovery via either method. The machine is connected to a wireless home network, via a router. The network is marked as "Home Network" in the Network and Sharing Center, which I think corresponds to the "Private" profile in Windows Firewall Advanced Settings app. (Confirm?) The PC is not part of a domain, and has never been part of a domain. The machine is not bridging any networks. There is a regular 100baseT connector but I have the network adapter for that disabled in Windows. Something else that seems odd. Within Windows Firewall Advanced Settings, there are no predefined rules available. If I click the "New Rule...." Action on the action pane, the "Predefined" option is greyed out. like this: In order to attempt to allow the network discovery protocols through on the private network, I hand-coded a bunch of rules, intending to allow the necessary UPnP and WDP protocols supporting network discovery. I copied them from a working Windows 7 Ultimate PC, running on the same network. This did not work. Even with the hand-coded rules, I still cannot turn on Network Discovery. I looked on the interwebs, and the only solution that appears to work is a re-install of Windows. Seriously? If I try netsh advfirewall firewall set rule group="Network Discovery" new enable=Yes ...it says "No rules match the specified criteria" EDIT: by the way, these services are running. DNS Client Function Discovery Resource Publication SSDP Discovery UPnP Device Host in any case, since it works with no firewall, I would assume all necessary services are present and running. The issue is a firewall thing, but I don't know how to diagnose further, or fix it. Q1: Is there a way to definitively insure the correct holes are punched through the Windows Firewall to allow Network Discovery to function? Q2: Should I expect the "predefined" firewall rules to be greyed out? Q3: Why did this change?

  Read the article

• DHCP and DNS services configuration for VOIP system, windows domain, etc

  - by Stemen

  My company has numerous physical offices (for purposes of this discussion, 15 buildings). Some of them are well-connected to our primary data center via fiber. Others will be connected to the data center by P2P T1. We are in the beginning stages of implementing an Avaya VOIP telephone system, and we will be replacing a significant portion of our network infrastructure in the process. In tandem with the phone system implementation, we are going to be re-addressing some of our networks, and consolidating most of our Windows domains into one (not all domains, just most). We currently have quite a few Windows domains, and they of course each have their own DNS zones. A few of those networks currently use DHCP, but the majority use static IP assignments for every device. I'm tired of managing static assignments -- I want to use DHCP configuration on everything except servers. Printers and etc will have DHCP reservations. The new IP phones will need to get IP addresses from DHCP, though they need to be in a separate VLAN from the computers/printers/etc. The computers and printers need to be registered in DNS. That's currently handled by the Windows DHCP servers on each of the respective domains. We need to place a priority on DHCP and DNS being available on a per-site basis (in case something were to interrupt the WAN connection) for computers and (primarily) phones. Smaller locations (which will have IP phones but not be a member of any Windows domain) will not have any Windows DNS/DHCP server(s) available. We also are looking for the easiest way to replace a part if it were to fail. That is to say, if a server/appliance/router hosting DHCP were to crash hard, and we couldn't extremely quickly recover the DHCP reservations and leases (and subsequently restore them onto a cold spare), we anticipate that bad things could happen. What is the best idea for how to re-implement DNS and DHCP keeping all of the above in mind? Some thoughts that have been raised (by myself or my coworkers): Use Windows DNS and DHCP servers, where they exist, and use IP helpers to route DHCP requests to some other Windows server if necessary. May not be acceptable if the WAN goes down and clients don't get a DHCP response. Use Windows DNS (everywhere, over WAN in some cases) and a mix of Windows DHCP and DHCP provided by Cisco routers. Every site would be covered for DHCP, but from what I've read, Cisco routers can't handle dynamic registration of DHCP clients to Windows DNS servers, which might create a problem where Cisco routers are used for DHCP. Use Windows DNS (everywhere, over WAN in some cases) and a mix of Windows DHCP and DHCP provided by some service running on an extremely low-price linux server. Is there any such software that would allow DHCP leases granted by these linux boxes to be dynamically registered on the Windows DNS servers? Come up with a Linux solution for both DNS and DHCP, and deploy low-price linux servers to every site. Requirements would be that the DNS zone be multi-master (like Windows DNS integrated with Active Directory), that DHCP be able to make dynamic DNS registrations in that zone, for every lease (where a hostname is provided and is thus possible), and that multiple servers be either authoritative for the same DHCP scope or at least receiving a real-time copy / replication / sync of the leases table so that if one server dies, we still know which MAC has what address. Purchase dedicated DNS/DHCP appliances, deploying to all sites. From what I read/see, this solves all of our technical problems. Then come the financial problems... I don't have a ton of money to spend on this. Or, some other solution that we've thus far overlooked and will consider upon recommendation. Can Cisco routers or Windows servers sync DHCP lease tables so that multiple servers can be authoritative (or active/passive for all I care) for the same scope, in case one of the partners were to fail? I've read online (repeatedly) that ISC's DHCP is able to maintain the same lease table across multiple servers, in order to solve this problem. Does anyone have any experience or advice to regarding that?

  Read the article

< Previous Page | 218 219 220 221 222 223 224 225 226 227  | Next Page >