Search Results

Search found 28627 results on 1146 pages for 'case statement'.

Page 223/1146 | < Previous Page | 219 220 221 222 223 224 225 226 227 228 229 230  | Next Page >

• T-SQL User-Defined Functions: the good, the bad, and the ugly (part 1)

  - by Hugo Kornelis

  So you thought that encapsulating code in user-defined functions for easy reuse is a good idea? Think again! SQL Server supports three types of user-defined functions. Only one of them qualifies as good. The other two – well, the title says it all, doesn’t it? The bad: scalar functions A scalar user-defined function (UDF) is very much like a stored procedure, except that it always returns a single value of a predefined data type – and because of that property, it isn’t invoked with an EXECUTE statement,...(read more)

  Read the article

• What do you call "X <= $foo <= Y" comparison?

  - by Jakob

  While writing a Perl statement like if ( $foo >= X && $foo <= Y ) yet again, I wondered why many programming languages do not support the more comfortable form if ( X <= $foo <= Y ) and what this is called. I came up with "3-legged comparison" but no results when searching for it. By the way there is also the "element-of-set" form if ( $foo in X..Y ) which I only consider more readable when provided via a short keyword. Is there a term for X <= $foo <= Y comparison? Which languages support it?

  Read the article

• How can I best study a problem to determine whether recursion can/should be used?

  - by user10326

  In some cases, I fail to see that a problem could be solved by the divide and conquer method. To give a specific example, when studying the find max sub-array problem, my first approach is to brute force it by using a double loop to find the max subarray. When I saw the solution using the divide and conquer approach which is recursion-based, I understood it but ok. From my side, though, when I first read the problem statement, I did not think that recursion is applicable. When studying a problem, is there any technique or trick to see that a recursion based (i.e. divide and conquer) approach can be used or not?

  Read the article

• RDA Health Checks for SOA

  - by ShawnBailey

  What is a health check in RDA? A health check evaluates something in your environment to determine whether a change needs to be considered in order to avoid a problem or optimize fuctionality. Examples of what this 'something' might be are: Configuration Parameters JVM Options Runtime Statistics What have we done for SOA? In the latest release of RDA, 4.30, we have added a Rule Set for SOA called 'Oracle SOA 11g (11.1.1) Post Installation (Generic)'. This Rule Set contains 14 SOA related health checks. These checks were all derived from common issues / solutions we see in support of the SOA product. Many of the recommendations come from the product documentation while others are covered in the SOA Knowledge Base. Our goal is that you will be able to easily identify the areas of concern and understand the guidance available from the output of the Rule Set. Running the health checks for SOA The rules that the checks use are installed with RDA and bundled by product or functional area into what are called 'Rule Sets'. To view the available Rule Sets simply run the command from the RDA home location: rda.cmd (or .sh) -dT hcve This will bring up a list of the available HCVE (Health Check / Verification Engine) Rule Sets. Each Rule Set contains a group of related rules that are used for evalutation and display of results. A rule can be considered synonymous with a single health check and they are assigned an ID, Name and Description that can be seen when they are executed. The Rule Set for SOA is option number 11 and you just enter this selection at the prompt. The Rule Set will then execute to completion. After running an HCVE Rule Set the tool will write the output to the RDA_HOME/output folder. The simplest way to view the output is to drag the .htm file to a browser but of course it can also be uploaded to a Service Request for evaluation by Oracle Support. Many of the Rule Sets will prompt you for information before they can execute their rules but the SOA Rule Set will identify the SOA domains configured in your RDA setup.cfg file. This means that you don't need to answer all of the questions again about where stuff is but it also means that you must have configured RDA for SOA. To run the Rule Set: Download the latest version of RDA from MOS Doc ID 314422.1 Configure RDA for your SOA domains. Detailed steps can be found here In it's simplest form the command is 'rda.cmd (.sh) -S SOA' Go to the RDA home location and enter the command 'rda.cmd (or .sh) -dT hcve' Select option '11' It should be noted that this our first release of a SOA Rule Set so there will probably be some things we need to clean up or fix. None of these rules will actually modify anything on your system as they are read only and do the evaluations internally. Please let us know if you have any issues with the rules or ideas for new ones so we can make them as useful as possible. The Checks Here is a list of the SOA health checks by ID, Name and Description. ID Name Description A00100 SOA Domain Homes Lists the SOA domains that were indentified from the RDA setup.cfg file A00200 Coherence Protocol Conflict Checks to see if you have both Unicast and Multicast configured in the same domain. Checks both the setDomainEnv and config.xml entries (if it exists). We recommend Unicast with fully qualified host names or IP addresses. A00210 Coherence Fully Qualified Host Checks that the host names are fully qualified or that IP addresses are used. Will fail if unqualified host names are detected. A00220 Unicast Local Host Checks that the Coherence localhost is specified for use with Unicast A00300 JTA Timeout Checks that the JTA timeout is configured for the domain and lists the value. The bundled rule will only list the current values of the JTA timeout for each SOA Domain. In the future the rule with fail with a warning if the value is 300 seconds or lower. It is recommended that timeouts follow the pattern 'syncMaxWaitTime' < EJB Timeouts < JTA Timeout. The 300 second value is important because the EJB Timeouts default to 300 seconds. Additional information can be found in MOS Doc ID 880313.1. A00310 XA Max Time Checks that the JTA Maximum XA call time is set for the domain. Fails if it is not explicitly set or if the value is less than or equal to the default of 12000 ms. A00320 XA Timeout Checks that the XA timeout is enabled and that the value is '0' for the SOA Data Source (SOADataSource-jdbc.xml) A00330 JDBC Statement Timeout Checks that the Statement Timeout is set for all SOA Data Sources. Fails if the value is not set or if it is set to the default of -1. A00400 XA Driver Checks that the SOA Data Source is configured to use an XA driver. Fails if it is not. A00410 JDBC Capacity Settings Checks that the minimum and maximum capacity are equal for all SOA Data Sources. Fails if they are not and lists specifically which data sources failed. A00500 SOA Roles Checks that the default SOA roles 'SOAAdmin' and 'SOAOperator' are configured for the soa-infra application in the file sytem-jazn-data.xml. Fails if they are not. A00700 SOA-INFRA Deployment Checks that the soa-infra application is deployed to either a cluster, all members of a cluster or a stand alone server. A00710 SOA Deployments Checks that the SOA related applications are deployed to the same domain members as soa-infra. A00720 SOA Library Deployments Checks that the SOA related libraries are deployed to the same domain members as soa-infra. A00730 Data Source Deployments Checks that the SOA Data Sources are all targeted to the same domain members as soa-infra

  Read the article

• Confusion testing fftw3 - poisson equation 2d test

  - by user3699736

  I am having trouble explaining/understanding the following phenomenon: To test fftw3 i am using the 2d poisson test case: laplacian(f(x,y)) = - g(x,y) with periodic boundary conditions. After applying the fourier transform to the equation we obtain : F(kx,ky) = G(kx,ky) /(kx² + ky²) (1) if i take g(x,y) = sin (x) + sin(y) , (x,y) \in [0,2 \pi] i have immediately f(x,y) = g(x,y) which is what i am trying to obtain with the fft : i compute G from g with a forward Fourier transform From this i can compute the Fourier transform of f with (1). Finally, i compute f with the backward Fourier transform (without forgetting to normalize by 1/(nx*ny)). In practice, the results are pretty bad? (For instance, the amplitude for N = 256 is twice the amplitude obtained with N = 512) Even worse, if i try g(x,y) = sin(x)*sin(y) , the curve has not even the same form of the solution. (note that i must change the equation; i divide by two the laplacian in this case : (1) becomes F(kx,ky) = 2*G(kx,ky)/(kx²+ky²) Here is the code: /* * fftw test -- double precision */ #include <iostream> #include <stdio.h> #include <stdlib.h> #include <math.h> #include <fftw3.h> using namespace std; int main() { int N = 128; int i, j ; double pi = 3.14159265359; double *X, *Y ; X = (double*) malloc(N*sizeof(double)); Y = (double*) malloc(N*sizeof(double)); fftw_complex *out1, *in2, *out2, *in1; fftw_plan p1, p2; double L = 2.*pi; double dx = L/((N - 1)*1.0); in1 = (fftw_complex*) fftw_malloc(sizeof(fftw_complex)*(N*N) ); out2 = (fftw_complex*) fftw_malloc(sizeof(fftw_complex)*(N*N) ); out1 = (fftw_complex*) fftw_malloc(sizeof(fftw_complex)*(N*N) ); in2 = (fftw_complex*) fftw_malloc(sizeof(fftw_complex)*(N*N) ); p1 = fftw_plan_dft_2d(N, N, in1, out1, FFTW_FORWARD,FFTW_MEASURE ); p2 = fftw_plan_dft_2d(N, N, in2, out2, FFTW_BACKWARD,FFTW_MEASURE); for(i = 0; i < N; i++){ X[i] = -pi + (i*1.0)*2.*pi/((N - 1)*1.0) ; for(j = 0; j < N; j++){ Y[j] = -pi + (j*1.0)*2.*pi/((N - 1)*1.0) ; in1[i*N + j][0] = sin(X[i]) + sin(Y[j]) ; // row major ordering //in1[i*N + j][0] = sin(X[i]) * sin(Y[j]) ; // 2nd test case in1[i*N + j][1] = 0 ; } } fftw_execute(p1); // FFT forward for ( i = 0; i < N; i++){ // f = g / ( kx² + ky² ) for( j = 0; j < N; j++){ in2[i*N + j][0] = out1[i*N + j][0]/ (i*i+j*j+1e-16); in2[i*N + j][1] = out1[i*N + j][1]/ (i*i+j*j+1e-16); //in2[i*N + j][0] = 2*out1[i*N + j][0]/ (i*i+j*j+1e-16); // 2nd test case //in2[i*N + j][1] = 2*out1[i*N + j][1]/ (i*i+j*j+1e-16); } } fftw_execute(p2); //FFT backward // checking the results computed double erl1 = 0.; for ( i = 0; i < N; i++) { for( j = 0; j < N; j++){ erl1 += fabs( in1[i*N + j][0] - out2[i*N + j][0]/N/N )*dx*dx; cout<< i <<" "<< j<<" "<< sin(X[i])+sin(Y[j])<<" "<< out2[i*N+j][0]/N/N <<" "<< endl; // > output } } cout<< erl1 << endl ; // L1 error fftw_destroy_plan(p1); fftw_destroy_plan(p2); fftw_free(out1); fftw_free(out2); fftw_free(in1); fftw_free(in2); return 0; } I can't find any (more) mistakes in my code (i installed the fftw3 library last week) and i don't see a problem with the maths either but i don't think it's the fft's fault. Hence my predicament. I am all out of ideas and all out of google as well. Any help solving this puzzle would be greatly appreciated. note : compiling : g++ test.cpp -lfftw3 -lm executing : ./a.out output and i use gnuplot in order to plot the curves : (in gnuplot ) splot "output" u 1:2:4 ( for the computed solution )

  Read the article

• copy file from unix system to windows using ant

  - by vishu

  can any one help me how to copy file from unix Windoes system to windows UNIX using ant? Thanks in advance EDIT Let me explain in detail what I am looking for I want to copy file from windows to unix machine (correcting my previous question not from unix to windows) using ANT. I thought of using ftp task. Before that as a check I tried to ftp unix sever from windows but it gave connection refused error(Do I need to provide my username and password,if that is the case what is the syntax). But I am able to connect through putty which asks for my user name and password. Does putty uses a different protocol. So if that is the case does ftp task works for me in ANT?. If not what task I need to use?

  Read the article

• Is there something better than a StringBuilder for big blocks of SQL in the code

  - by Eduardo Molteni

  I'm just tired of making a big SQL statement, test it, and then paste the SQL into the code and adding all the sqlstmt.append(" at the beginning and the ") at the end. It's 2011, isn't there a better way the handle a big chunk of strings inside code? Please: don't suggest stored procedures or ORMs. edit Found the answer using XML literals and CData. Thanks to all the people that actually tried to answer the question without questioning me for not using ORM, SPs and using VB edit 2 the question leave me thinking that languages could try to make a better effort for using inline SQL with color syntax, etc. It will be cheaper that developing Linq2SQL. Just something like: dim sql = <sql> SELECT * ... </sql>

  Read the article

• Why is it java code indented as BSD KNF Style and C C++ code indented as Allman or BSD style?

  - by Caffeine

  I do understand that coding convention is a matter of preference, and that different coding conventions have different subtle advantages or shortcomings, and depending on what one wants, one should choose his/her style. But why is usually Java written where the opening brace is on the same line as the function definition of control statement, and in C or C++ the curly braces have a line of their own? BSD KNF style if (data != NULL && res > 0) { if (JS_DefineProperty(cx, o, "data", STRING_TO_JSVAL(JS_NewStringCopyN(cx, data, res)), NULL, NULL, JSPROP_ENUMERATE) != 0) { QUEUE_EXCEPTION("Internal error!"); goto err; } PQfreemem(data); } else { if (JS_DefineProperty(cx, o, "data", OBJECT_TO_JSVAL(NULL), NULL, NULL, JSPROP_ENUMERATE) != 0) { QUEUE_EXCEPTION("Internal error!"); goto err; } } Allman or BSD Style if (x == y) { something(); somethingelse(); } Courtesy: http://en.wikipedia.org/wiki/Indent_style

  Read the article

• C Programming Language and UNIX Pioneer Passes Away

  According to a statement given to the New York Times by Ritchie's brother Bill, Dennis Ritchie was living alone at his home in Berkeley Heights, New Jersey, prior to his death. Richie's health had reportedly deteriorated, and his last years were made difficult by the after effects of treatments for prostate cancer and heart disease. In addition to his brother Bill, Ritchie is survived by his sister Lynn and his other brother John. Dennis Ritchie was born in Bronxville, New York, in 1941. His father was an engineer with Bell Labs and his mother was a homemaker. His family eventually moved...

  Read the article

• jquery ui tabs redirecting to ASPX page on postbacks

  - by neoneo007

  I am being redirected to the actual aspx page when I submit the form. How to avoid the redirection. Tabs.aspx <div id="container-1"> <ul> <li><a href="Survey.aspx?group=1"><span>HR</span></a></li> <li><a href="Survey.aspx?group=2"><span>Sales</span></a></li> <li><a href="Survey.aspx?group=3"><span>Finance</span></a></li> </ul> jquery code in tabs.aspx <script type="text/javascript"> $(function() { $('#container-1 > ul').tabs(); </script> Survey.aspx <form id="form1" runat="server"> <div> <asp:Label ID="lblHeading" runat="server"></asp:Label><br /> <asp:HiddenField ID="hdnGroupId" runat="server" /> <br /> 1) Question 1 <asp:DropDownList ID="DropDownList1" runat="server"> </asp:DropDownList>     <asp:TextBox ID="TextBox1" runat="server"></asp:TextBox><br /> 2) Another question:  <asp:TextBox ID="TextBox2" runat="server"></asp:TextBox><br /> <br /> <br /> <asp:Button ID="btnSave" runat="server" OnClick="btnSave_Click" Text="Save" /><br /> <div id="Result">Click here for the time.</div> <asp:Label ID="lblMessage" runat="server"></asp:Label></div> </form> Survey page Code behind protected void btnSave_Click(object sender, EventArgs e) { if (groupId > 0) { switch (groupId) { case 1: lblMessage.Text = "HR data is saved."; break; case 2: lblMessage.Text = "Sales data is saved."; break; case 3: lblMessage.Text = "Finance data is saved."; break; default: break; } } }

  Read the article

• mysql view performance

  - by vamsivanka

  I have a table for about 100,000 users in it. First Case: explain select * from users where state = 'ca' when i do an explain plan for the above query i got the cost as 5200 Second Case: Create or replace view vw_users as select * from users Explain select * from vw_users where state = 'ca' when i do an explain plan on the second query i got the cost as 100,000. How does the where clause in the view work ?? Is the where clause applied after the view retrieves all the rows. Please let know, how can i fix this issue. Thanks

  Read the article

• Why use multiple OpenGL context

  - by Luca

  For rendering I have a current GL context, associated to a window. In the case the application render multiple scenes (for example using accumulation or different viewports) I think it is ok to reuse the same context. My question, indeed, is: why should I use multiple GL context? I red on ARB_framebuffer_object extension spec that MakeCurrent call could be expansive, and in the case the ARB_framebuffer_object extension is present I can render on a generic buffer without using MakeCurrent. Apparently the only reason to use multiple GL context is to avoid to setup context state (pixel store, transfer, point size, polygon stipple...) or to have avaialable multiple render buffers configuration (one context with accumulation, another without). How to determine when is better an alternative context instead of setting context state? Thankyou all!

  Read the article

• Runtime analysis

  - by Joe Smith

  can someone please help me with the analysis of the following function (for inputs of size n). The part that confuses me the most is the inner for loop. def prefix_sums(L): # Total cost = ? pSum = [] #cost = 1 for a in range(len(L)+1): # range + body of function = (n+1) + (n+1)*(body) ? s = 0 #cost = 1 for b in range(a): # cost = ? s = s + L[b] #cost = operation + accessing list = 2 pSum.append(s) #cost = 1 return pSum #cost = 1 What I need to do is figure out the cost of each statement.

  Read the article

• Volatile or synchronized for primitive type?

  - by DKSRathore

  In java, assignment is atomic if the size of the variable is less that or equal to 32 bits but is not if more than 32 bits. What(volatile/synchronized) would be more efficient to use in case of double or long assignment. like, volatile double x = y; synchronized is not applicable with primitive argument. How do i use synchronized in this case. Of course I don't want to lock my class. so this should not be used.

  Read the article

• Using xsl:key to store result of boolean expression

  - by hielsnoppe

  In my transformation there is an expression some elements are repeatedly tested against. To reduce redundancy I'd like to encapsulate this in an xsl:key like this (not working): <xsl:key name="td-is-empty" match="td" use="not(./node()[normalize-space(.) or ./node()])" /> The expected behaviour is the key to yield a boolean value of true in case the expression is evaluated successfully and otherwise false. Then I'd like to use it as follows: <xsl:template match="td[not(key('td-is-empty', .))]" /> Is this possible and in case yes, how?

  Read the article

• Using Transaction Logging to Recover Post-Archived Essbase data

  - by Keith Rosenthal

  Data recovery is typically performed by restoring data from an archive.  Data added or removed since the last archive took place can also be recovered by enabling transaction logging in Essbase.  Transaction logging works by writing transactions to a log store.  The information in the log store can then be recovered by replaying the log store entries in sequence since the last archive took place.  The following information is recorded within a transaction log entry: Sequence ID Username Start Time End Time Request Type A request type can be one of the following categories: Calculations, including the default calculation as well as both server and client side calculations Data loads, including data imports as well as data loaded using a load rule Data clears as well as outline resets Locking and sending data from SmartView and the Spreadsheet Add-In.  Changes from Planning web forms are also tracked since a lock and send operation occurs during this process. You can use the Display Transactions command in the EAS console or the query database MAXL command to view the transaction log entries. Enabling Transaction Logging Transaction logging can be enabled at the Essbase server, application or database level by adding the TRANSACTIONLOGLOCATION essbase.cfg setting.  The following is the TRANSACTIONLOGLOCATION syntax: TRANSACTIONLOGLOCATION [appname [dbname]] LOGLOCATION NATIVE ENABLE | DISABLE Note that you can have multiple TRANSACTIONLOGLOCATION entries in the essbase.cfg file.  For example: TRANSACTIONLOGLOCATION Hyperion/trlog NATIVE ENABLE TRANSACTIONLOGLOCATION Sample Hyperion/trlog NATIVE DISABLE The first statement will enable transaction logging for all Essbase applications, and the second statement will disable transaction logging for the Sample application.  As a result, transaction logging will be enabled for all applications except the Sample application. A location on a physical disk other than the disk where ARBORPATH or the disk files reside is recommended to optimize overall Essbase performance. Configuring Transaction Log Replay Although transaction log entries are stored based on the LOGLOCATION parameter of the TRANSACTIONLOGLOCATION essbase.cfg setting, copies of data load and rules files are stored in the ARBORPATH/app/appname/dbname/Replay directory to optimize the performance of replaying logged transactions.  The default is to archive client data loads, but this configuration setting can be used to archive server data loads (including SQL server data loads) or both client and server data loads. To change the type of data to be archived, add the TRANSACTIONLOGDATALOADARCHIVE configuration setting to the essbase.cfg file.  Note that you can have multiple TRANSACTIONLOGDATALOADARCHIVE entries in the essbase.cfg file to adjust settings for individual applications and databases. Replaying the Transaction Log and Transaction Log Security Considerations To replay the transactions, use either the Replay Transactions command in the EAS console or the alter database MAXL command using the replay transactions grammar.  Transactions can be replayed either after a specified log time or using a range of transaction sequence IDs. The default when replaying transactions is to use the security settings of the user who originally performed the transaction.  However, if that user no longer exists or that user's username was changed, the replay operation will fail. Instead of using the default security setting, add the REPLAYSECURITYOPTION essbase.cfg setting to use the security settings of the administrator who performs the replay operation.  REPLAYSECURITYOPTION 2 will explicitly use the security settings of the administrator performing the replay operation.  REPLAYSECURITYOPTION 3 will use the administrator security settings if the original user’s security settings cannot be used. Removing Transaction Logs and Archived Replay Data Load and Rules Files Transaction logs and archived replay data load and rules files are not automatically removed and are only removed manually.  Since these files can consume a considerable amount of space, the files should be removed on a periodic basis. The transaction logs should be removed one database at a time instead of all databases simultaneously.  The data load and rules files associated with the replayed transactions should be removed in chronological order from earliest to latest.  In addition, do not remove any data load and rules files with a timestamp later than the timestamp of the most recent archive file. Partitioned Database Considerations For partitioned databases, partition commands such as synchronization commands cannot be replayed.  When recovering data, the partition changes must be replayed manually and logged transactions must be replayed in the correct chronological order. If the partitioned database includes any @XREF commands in the calc script, the logged transactions must be selectively replayed in the correct chronological order between the source and target databases. References For additional information, please see the Oracle EPM System Backup and Recovery Guide.  For EPM 11.1.2.2, the link is http://docs.oracle.com/cd/E17236_01/epm.1112/epm_backup_recovery_1112200.pdf

  Read the article

• Difference between Revert and Update in Mercurial

  - by Edan Maor

  I'm just getting started with Mercurial, and I've come across something which I don't understand. I made changes to several files, and now I want to undo all the changes I made to one of them (i.e. go back to my last commit for one specific file). As far as I can see, the command I want is revert. In the page I linked to, there is the following statement: This operation however does not change the parent revision of the working directory (or revisions in case of an uncommitted merge). To undo an uncomitted merge, you can use "hg update -C -r." which will reset the parents to the first parent. I don't understand the difference between the two (hg revert vs. hg update -C -r). Can anyone enlighten me as to the difference? And in my case, do I really want the revert or the update to go get rid of the changes I made to the file? Thanks

  Read the article

• How to salvage SQL server 2008 query from KILLED/ROLLBACK state?

  - by littlegreen

  I have a stored procedure that inserts batches of millions of rows, emerging from a certain query, into an SQL database. It has one parameter selecting the batch; when this parameter is omitted, it will gather a list of batches and recursively call itself, in order to iterate over batches. In (pseudo-)code, it looks something like this: CREATE PROCEDURE spProcedure AS BEGIN IF @code = 0 BEGIN ... WHILE @@Fetch_Status=0 BEGIN EXEC spProcedure @code FETCH NEXT ... INTO @code END END ELSE BEGIN -- Disable indexes ... INSERT INTO table SELECT (...) -- Enable indexes ... Now it can happen that this procedure is slow, for whatever reason: it can't get a lock, one of the indexes it uses is misdefined or disabled. In that case, I want to be able kill the procedure, truncate and recreate the resulting table, and try again. However, when I try and kill the procedure, the process frequently oozes into a KILLED/ROLLBACK state from which there seems to be no return. From Google I have learned to do an sp_lock, find the spid, and then kill it with KILL <spid>. But when I try to kill it, it tells me SPID 75: transaction rollback in progress. Estimated rollback completion: 0%. Estimated time remaining: 554 seconds. I did find a forum message hinting that another spid should be killed before the other one can start a rollback. But that didn't work for me either, plus I do not understand, why that would be the case... could it be because I am recursively calling my own stored procedure? (But it should be having the same spid, right?) In any case, my process is just sitting there, being dead, not responding to kills, and locking the table. This is very frustrating, as I want to go on developing my queries, not waiting hours on my server sitting dead while pretending to be finishing a supposed rollback. Is there some way in which I can tell the server not to store any rollback information for my query? Or not to allow any other queries to interfere with the rollback, so that it will not take so long? Or how to rewrite my query in a better way, or how kill the process successfully without restarting the server?

  Read the article

• connect tableView + tableView

  - by totato

  Right now I have an indexed tableview that goes to a detail view but i want it to go to another tableview then a detail view. my code like this: ` - (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath { displyAnnController *anController = [[displyAnnController alloc] initWithNibName:@"AnnView" bundle:[NSBundle mainBundle]]; DetailViewController *dvController = [[DetailViewController alloc] initWithStyle:UITableViewStyleGrouped]; switch (indexPath.row) { case 0: [self.navigationController pushViewController:anController animated:YES]; [anController release]; anController = nil; break; case 1: [self.navigationController pushViewController:dvController animated:YES]; [dvController release]; dvController = nil; break; default: break; }` and when I press the cell with index 0 in the simulator, the program is crash! what's the problem? pleas help me ..

  Read the article

• Reinforcement learning And POMDP

  - by Betamoo

  I am trying to use Multi-Layer NN to implement probability function in Partially Observable Markov Process.. I thought inputs to the NN would be: current state, selected action, result state; The output is a probability in [0,1] (prob. that performing selected action on current state will lead to result state) In training, I fed the inputs stated before, into the NN, and I taught it the output=1.0 for each case that already occurred. The problem : For nearly all test case the output probability is near 0.95.. no output was under 0.9 ! Even for nearly impossible results, it gave that high prob. PS:I think this is because I taught it happened cases only, but not un-happened ones.. But I can not at each step in the episode teach it the output=0.0 for every un-happened action! Any suggestions how to over come this problem? Or may be another way to use NN or to implement prob function? Thanks

  Read the article

• SOA 11g Technology Adapters – ECID Propagation

  - by Greg Mally

  Overview Many SOA Suite 11g deployments include the use of the technology adapters for various activities including integration with FTP, database, and files to name a few. Although the integrations with these adapters are easy and feature rich, there can be some challenges from the operations perspective. One of these challenges is how to correlate a logical business transaction across SOA component instances. This correlation is typically accomplished via the execution context ID (ECID), but we lose the ECID correlation when the business transaction spans technologies like FTP, database, and files. A new feature has been introduced in the Oracle adapter JCA framework to allow the propagation of the ECID. This feature is available in the forthcoming SOA Suite 11.1.1.7 (PS6). The basic concept of propagating the ECID is to identify somewhere in the payload of the message where the ECID can be stored. Then two Binding Properties, relating to the location of the ECID in the message, are added to either the Exposed Service (left-hand side of composite) or External Reference (right-hand side of composite). This will give the JCA framework enough information to either extract the ECID from or add the ECID to the message. In the scenario of extracting the ECID from the message, the ECID will be used for the new component instance. Where to Put the ECID When trying to determine where to store the ECID in the message, you basically have two options: Add a new optional element to your message schema. Leverage an existing element that is not used in your schema. The best scenario is that you are able to add the optional element to your message since trying to find an unused element will prove difficult in most situations. The schema will be holding the ECID value which looks something like the following: 11d1def534ea1be0:7ae4cac3:13b4455735c:-8000-00000000000002dc Configuring Composite Services/References Now that you have identified where you want the ECID to be stored in the message, the JCA framework needs to have this information as well. The two pieces of information that the framework needs relates to the message schema: The namespace for the element in the message. The XPath to the element in the message. To better understand this, let's look at an example for the following database table: When an Exposed Service is created via the Database Adapter Wizard in the composite, the following schema is created: For this example, the two Binding Properties we add to the ReadRow service in the composite are: <!-- Properties for the binding to propagate the ECID from the database table --> <property name="jca.ecid.nslist" type="xs:string" many="false">  xmlns:ns1="http://xmlns.oracle.com/pcbpel/adapter/db/top/ReadRow"</property> <property name="jca.ecid.xpath" type="xs:string" many="false">  /ns1:EcidPropagationCollection/ns1:EcidPropagation/ns1:ecid</property> Notice that the property called jca.ecid.nslist contains the targetNamespace defined in the schema and the property called jca.ecid.xpath contains the XPath statement to the element. The XPath statement also contains the appropriate namespace prefix (ns1) which is defined in the jca.ecid.nslist property. When the Database Adapter service reads a row from the database, it will retrieve the ECID value from the payload and remove the element from the payload. When the component instance is created, it will be associated with the retrieved ECID and the payload contains everything except the ECID element/value. The only time the ECID is visible is when it is stored safely in the resource technology like the database, a file, or a queue. Simple Database/File/JMS Example This section contains a simplified example of how the ECID can propagate through a database table, a file, and JMS queue. The composite for the example looks like the following: The flow of this example is as follows: Invoke database insert using the insertwithecidbpelprocess_client_ep Service. The InsertWithECIDBPELProcess adds a row to the database via the Database Adapter. The JCA Framework adds the ECID to the message prior to inserting. The ReadRow Service retrieves the record and the JCA Framework extracts the ECID from the message. The ECID element is removed from the message. An instance of ReadRowBPELProcess is created and it is associated with the retried ECID. The ReadRowBPELProcess now writes the record to the file system via the File Adapter. The JCA Framework adds the ECID to the message prior to writing the message to file. The ReadFile Service retrieves the record from the file system and the JCA Framework extracts the ECID from the message. The ECID element is removed from the message. An instance of ReadFileBPELProcess is created and it is associated with the retried ECID. The ReadFileBPELProcess now enqueues the message via the JMS Adapter. The JCA Framework adds the ECID to the message prior to enqueuing the message. The DequeueMessage Service retrieves the record and the JCA Framework extracts the ECID from the message. The ECID element is removed from the message. An instance of DequeueMessageBPELProcess is created and it is associated with the retried ECID. The logical flow ends. When viewing the Flow Trace in the Enterprise Manger, you will now see all the instances correlated via ECID: Please check back here when SOA Suite 11.1.1.7 is released for this example. With the example you can run it yourself and reinforce what has been shared in this blog via a hands-on experience. One final note: the contents of this blog may be included in the official SOA Suite 11.1.1.7 documentation, but you will still need to come here to get the example.

  Read the article

• breakdown xpath

  - by lovetoknow

  I am looking at the website. Trying to transfer selenium html to junit but could not get it to work because it keeps saying Error: Element not found. Maybe syntax error because I was able to break it down to the shortest path in firebug but still could not get to compile..What do you do in this case ? Enrollment I use firebug Xpath to get the value of the above link /html/body/div[@id='contentDisplayPane']/div[@id='mainDiv']/div[@id='mainDivContent']/div[@id='simpleBox']/table/tbody/tr[2]/td[@id='fb_PageContent']/table/tbody/tr/td/table/tbody/tr/td[4]/a Using firebug xpath, I was able to break it down to this and able to access Enrollment link..However when I put this in the junit test case selenium.click(("//div[@id='simpleBox']/table/tbody/tr[2]/td[@id='fb_PageContent']/table/tbody/tr/td/table/tbody/tr/td[4]/a"); I get ERROR: Element //div[@id='simpleBox']/table/tbody/tr[2]/td[@id='fb_PageContent']/table/tbody/tr/td/table/tbody/tr/td[4]/a") not found Any help or tip is appreciated

  Read the article

• How do I handle a missing mandatory argument in Ruby OptionParser?

  - by Rob Jones

  In OptionParser I can make an option mandatory, but if I leave out that value it will take the name of any following option as the value, screwing up the rest of the command line parsing. Here is a test case that echoes the values of the options: $ ./test_case.rb --input foo --output bar output bar input foo Now leave out the value for the first option: $ ./test_case.rb --input --output bar input --output Is there some way to prevent it taking another option name as a value? Thanks! Here is the test case code: #!/usr/bin/env ruby require 'optparse' files = Hash.new option_parser = OptionParser.new do |opts| opts.on('-i', '--input FILENAME', 'Input filename - required') do |filename| files[:input] = filename end opts.on('-o', '--output FILENAME', 'Output filename - required') do |filename| files[:output] = filename end end begin option_parser.parse!(ARGV) rescue OptionParser::ParseError $stderr.print "Error: " + $! + "\n" exit end files.keys.each do |key| print "#{key} #{files[key]}\n" end

  Read the article

• Setting up a pc bluetooth server for android

  - by Del

  Alright, I've been reading a lot of topics the past two or three days and nothing seems to have asked this. I am writing a PC side server for my andriod device, this is for exchanging some information and general debugging. Eventually I will be connecting to a SPP device to control a microcontroller. I have managed, using the following (Android to pc) to connect to rfcomm channel 11 and exchange data between my android device and my pc. Method m = device.getClass().getMethod("createRfcommSocket", new Class[] { int.class }); tmp = (BluetoothSocket) m.invoke(device, Integer.valueOf(11)); I have attempted the createRfcommSocketToServiceRecord(UUID) method, with absolutely no luck. For the PC side, I have been using the C Bluez stack for linux. I have the following code which registers the service and opens a server socket: int main(int argc, char **argv) { struct sockaddr_rc loc_addr = { 0 }, rem_addr = { 0 }; char buf[1024] = { 0 }; char str[1024] = { 0 }; int s, client, bytes_read; sdp_session_t *session; socklen_t opt = sizeof(rem_addr); session = register_service(); s = socket(AF_BLUETOOTH, SOCK_STREAM, BTPROTO_RFCOMM); loc_addr.rc_family = AF_BLUETOOTH; loc_addr.rc_bdaddr = *BDADDR_ANY; loc_addr.rc_channel = (uint8_t) 11; bind(s, (struct sockaddr *)&loc_addr, sizeof(loc_addr)); listen(s, 1); client = accept(s, (struct sockaddr *)&rem_addr, &opt); ba2str( &rem_addr.rc_bdaddr, buf ); fprintf(stderr, "accepted connection from %s\n", buf); memset(buf, 0, sizeof(buf)); bytes_read = read(client, buf, sizeof(buf)); if( bytes_read 0 ) { printf("received [%s]\n", buf); } sprintf(str,"to Android."); printf("sent [%s]\n",str); write(client, str, sizeof(str)); close(client); close(s); sdp_close( session ); return 0; } sdp_session_t *register_service() { uint32_t svc_uuid_int[] = { 0x00000000,0x00000000,0x00000000,0x00000000 }; uint8_t rfcomm_channel = 11; const char *service_name = "Remote Host"; const char *service_dsc = "What the remote should be connecting to."; const char *service_prov = "Your mother"; uuid_t root_uuid, l2cap_uuid, rfcomm_uuid, svc_uuid; sdp_list_t *l2cap_list = 0, *rfcomm_list = 0, *root_list = 0, *proto_list = 0, *access_proto_list = 0; sdp_data_t *channel = 0, *psm = 0; sdp_record_t *record = sdp_record_alloc(); // set the general service ID sdp_uuid128_create( &svc_uuid, &svc_uuid_int ); sdp_set_service_id( record, svc_uuid ); // make the service record publicly browsable sdp_uuid16_create(&root_uuid, PUBLIC_BROWSE_GROUP); root_list = sdp_list_append(0, &root_uuid); sdp_set_browse_groups( record, root_list ); // set l2cap information sdp_uuid16_create(&l2cap_uuid, L2CAP_UUID); l2cap_list = sdp_list_append( 0, &l2cap_uuid ); proto_list = sdp_list_append( 0, l2cap_list ); // set rfcomm information sdp_uuid16_create(&rfcomm_uuid, RFCOMM_UUID); channel = sdp_data_alloc(SDP_UINT8, &rfcomm_channel); rfcomm_list = sdp_list_append( 0, &rfcomm_uuid ); sdp_list_append( rfcomm_list, channel ); sdp_list_append( proto_list, rfcomm_list ); // attach protocol information to service record access_proto_list = sdp_list_append( 0, proto_list ); sdp_set_access_protos( record, access_proto_list ); // set the name, provider, and description sdp_set_info_attr(record, service_name, service_prov, service_dsc); int err = 0; sdp_session_t *session = 0; // connect to the local SDP server, register the service record, and // disconnect session = sdp_connect( BDADDR_ANY, BDADDR_LOCAL, SDP_RETRY_IF_BUSY ); err = sdp_record_register(session, record, 0); // cleanup //sdp_data_free( channel ); sdp_list_free( l2cap_list, 0 ); sdp_list_free( rfcomm_list, 0 ); sdp_list_free( root_list, 0 ); sdp_list_free( access_proto_list, 0 ); return session; } And another piece of code, in addition to 'sdptool browse local' which can verifty that the service record is running on the pc: int main(int argc, char **argv) { uuid_t svc_uuid; uint32_t svc_uuid_int[] = { 0x00000000,0x00000000,0x00000000,0x00000000 }; int err; bdaddr_t target; sdp_list_t *response_list = NULL, *search_list, *attrid_list; sdp_session_t *session = 0; str2ba( "01:23:45:67:89:AB", &target ); // connect to the SDP server running on the remote machine session = sdp_connect( BDADDR_ANY, BDADDR_LOCAL, SDP_RETRY_IF_BUSY ); // specify the UUID of the application we're searching for sdp_uuid128_create( &svc_uuid, &svc_uuid_int ); search_list = sdp_list_append( NULL, &svc_uuid ); // specify that we want a list of all the matching applications' attributes uint32_t range = 0x0000ffff; attrid_list = sdp_list_append( NULL, &range ); // get a list of service records that have UUID 0xabcd err = sdp_service_search_attr_req( session, search_list, \ SDP_ATTR_REQ_RANGE, attrid_list, &response_list); sdp_list_t *r = response_list; // go through each of the service records for (; r; r = r-next ) { sdp_record_t *rec = (sdp_record_t*) r-data; sdp_list_t *proto_list; // get a list of the protocol sequences if( sdp_get_access_protos( rec, &proto_list ) == 0 ) { sdp_list_t *p = proto_list; // go through each protocol sequence for( ; p ; p = p-next ) { sdp_list_t *pds = (sdp_list_t*)p-data; // go through each protocol list of the protocol sequence for( ; pds ; pds = pds-next ) { // check the protocol attributes sdp_data_t *d = (sdp_data_t*)pds-data; int proto = 0; for( ; d; d = d-next ) { switch( d-dtd ) { case SDP_UUID16: case SDP_UUID32: case SDP_UUID128: proto = sdp_uuid_to_proto( &d-val.uuid ); break; case SDP_UINT8: if( proto == RFCOMM_UUID ) { printf("rfcomm channel: %d\n",d-val.int8); } break; } } } sdp_list_free( (sdp_list_t*)p-data, 0 ); } sdp_list_free( proto_list, 0 ); } printf("found service record 0x%x\n", rec-handle); sdp_record_free( rec ); } sdp_close(session); } Output: $ ./search rfcomm channel: 11 found service record 0x10008 sdptool: Service Name: Remote Host Service Description: What the remote should be connecting to. Service Provider: Your mother Service RecHandle: 0x10008 Protocol Descriptor List: "L2CAP" (0x0100) "RFCOMM" (0x0003) Channel: 11 And for logcat I'm getting this: 07-22 15:57:06.087: ERROR/BTLD(215): ****************search UUID = 0000*********** 07-22 15:57:06.087: INFO//system/bin/btld(209): btapp_dm_GetRemoteServiceChannel() 07-22 15:57:06.087: INFO//system/bin/btld(209): ##### USerial_Ioctl: BT_Wake, 0x8003 #### 07-22 15:57:06.097: INFO/ActivityManager(88): Displayed activity com.example.socktest/.socktest: 79 ms (total 79 ms) 07-22 15:57:06.697: INFO//system/bin/btld(209): ##### USerial_Ioctl: BT_Sleep, 0x8004 #### 07-22 15:57:07.517: WARN/BTLD(215): ccb timer ticks: 2147483648 07-22 15:57:07.517: INFO//system/bin/btld(209): ##### USerial_Ioctl: BT_Wake, 0x8003 #### 07-22 15:57:07.547: WARN/BTLD(215): info:x10 07-22 15:57:07.547: INFO/BTL-IFS(215): send_ctrl_msg: [BTL_IFS CTRL] send BTLIF_DTUN_SIGNAL_EVT (CTRL) 10 pbytes (hdl 14) 07-22 15:57:07.547: DEBUG/DTUN_HCID_BZ4(253): dtun_dm_sig_link_up() 07-22 15:57:07.547: INFO/DTUN_HCID_BZ4(253): dtun_dm_sig_link_up: dummy_handle = 342 07-22 15:57:07.547: DEBUG/ADAPTER(253): adapter_get_device(00:02:72:AB:7C:EE) 07-22 15:57:07.547: ERROR/BluetoothEventLoop.cpp(88): pollData[0] is revented, check next one 07-22 15:57:07.547: ERROR/BluetoothEventLoop.cpp(88): event_filter: Received signal org.bluez.Device:PropertyChanged from /org/bluez/253/hci0/dev_00_02_72_AB_7C_EE 07-22 15:57:07.777: WARN/BTLD(215): process_service_search_attr_rsp 07-22 15:57:07.787: INFO/BTL-IFS(215): send_ctrl_msg: [BTL_IFS CTRL] send BTLIF_DTUN_SIGNAL_EVT (CTRL) 13 pbytes (hdl 14) 07-22 15:57:07.787: INFO/DTUN_HCID_BZ4(253): dtun_dm_sig_rmt_service_channel: success=0, service=00000000 07-22 15:57:07.787: ERROR/DTUN_HCID_BZ4(253): discovery unsuccessful! 07-22 15:57:08.497: INFO//system/bin/btld(209): ##### USerial_Ioctl: BT_Sleep, 0x8004 #### 07-22 15:57:09.507: INFO//system/bin/btld(209): ##### USerial_Ioctl: BT_Wake, 0x8003 #### 07-22 15:57:09.597: INFO/BTL-IFS(215): send_ctrl_msg: [BTL_IFS CTRL] send BTLIF_DTUN_SIGNAL_EVT (CTRL) 11 pbytes (hdl 14) 07-22 15:57:09.597: DEBUG/DTUN_HCID_BZ4(253): dtun_dm_sig_link_down() 07-22 15:57:09.597: INFO/DTUN_HCID_BZ4(253): dtun_dm_sig_link_down device = 0xf7a0 handle = 342 reason = 22 07-22 15:57:09.597: ERROR/BluetoothEventLoop.cpp(88): pollData[0] is revented, check next one 07-22 15:57:09.597: ERROR/BluetoothEventLoop.cpp(88): event_filter: Received signal org.bluez.Device:PropertyChanged from /org/bluez/253/hci0/dev_00_02_72_AB_7C_EE 07-22 15:57:09.597: DEBUG/BluetoothA2dpService(88): Received intent Intent { act=android.bluetooth.device.action.ACL_DISCONNECTED (has extras) } 07-22 15:57:10.107: INFO//system/bin/btld(209): ##### USerial_Ioctl: BT_Sleep, 0x8004 #### 07-22 15:57:12.107: DEBUG/BluetoothService(88): Cleaning up failed UUID channel lookup: 00:02:72:AB:7C:EE 00000000-0000-0000-0000-000000000000 07-22 15:57:12.107: ERROR/Socket Test(5234): connect() failed 07-22 15:57:12.107: DEBUG/ASOCKWRP(5234): asocket_abort [31,32,33] 07-22 15:57:12.107: INFO/BLZ20_WRAPPER(5234): blz20_wrp_shutdown: s 31, how 2 07-22 15:57:12.107: DEBUG/BLZ20_WRAPPER(5234): blz20_wrp_shutdown: fd (-1:31), bta -1, rc 0, wflags 0x0 07-22 15:57:12.107: INFO/BLZ20_WRAPPER(5234): __close_prot_rfcomm: fd 31 07-22 15:57:12.107: INFO/BLZ20_WRAPPER(5234): __close_prot_rfcomm: bind not completed on this socket 07-22 15:57:12.107: DEBUG/BLZ20_WRAPPER(5234): btlif_signal_event: fd (-1:31), bta -1, rc 0, wflags 0x0 07-22 15:57:12.107: DEBUG/BLZ20_WRAPPER(5234): btlif_signal_event: event BTLIF_BTS_EVT_ABORT matched 07-22 15:57:12.107: DEBUG/BTL_IFC_WRP(5234): wrp_close_s_only: wrp_close_s_only [31] (31:-1) [] 07-22 15:57:12.107: DEBUG/BTL_IFC_WRP(5234): wrp_close_s_only: data socket closed 07-22 15:57:12.107: DEBUG/BTL_IFC_WRP(5234): wsactive_del: delete wsock 31 from active list [ad3e1494] 07-22 15:57:12.107: DEBUG/BTL_IFC_WRP(5234): wrp_close_s_only: wsock fully closed, return to pool 07-22 15:57:12.107: DEBUG/BLZ20_WRAPPER(5234): btsk_free: success 07-22 15:57:12.107: DEBUG/BLZ20_WRAPPER(5234): blz20_wrp_write: wrote 1 bytes out of 1 on fd 33 07-22 15:57:12.107: DEBUG/ASOCKWRP(5234): asocket_destroy 07-22 15:57:12.107: DEBUG/ASOCKWRP(5234): asocket_abort [31,32,33] 07-22 15:57:12.107: INFO/BLZ20_WRAPPER(5234): blz20_wrp_shutdown: s 31, how 2 07-22 15:57:12.107: DEBUG/BLZ20_WRAPPER(5234): blz20_wrp_shutdown: btsk not found, normal close (31) 07-22 15:57:12.107: DEBUG/BLZ20_WRAPPER(5234): blz20_wrp_write: wrote 1 bytes out of 1 on fd 33 07-22 15:57:12.107: INFO/BLZ20_WRAPPER(5234): blz20_wrp_close: s 33 07-22 15:57:12.107: DEBUG/BLZ20_WRAPPER(5234): blz20_wrp_close: btsk not found, normal close (33) 07-22 15:57:12.107: INFO/BLZ20_WRAPPER(5234): blz20_wrp_close: s 32 07-22 15:57:12.107: DEBUG/BLZ20_WRAPPER(5234): blz20_wrp_close: btsk not found, normal close (32) 07-22 15:57:12.107: INFO/BLZ20_WRAPPER(5234): blz20_wrp_close: s 31 07-22 15:57:12.107: DEBUG/BLZ20_WRAPPER(5234): blz20_wrp_close: btsk not found, normal close (31) 07-22 15:57:12.157: DEBUG/Sensors(88): close_akm, fd=151 07-22 15:57:12.167: ERROR/CachedBluetoothDevice(477): onUuidChanged: Time since last connect14970690 07-22 15:57:12.237: DEBUG/Socket Test(5234): -On Stop- Sorry for bombarding you guys with what seems like a difficult question and a lot to read, but I've been working on this problem for a while and I've tried a lot of different things to get this working. Let me reiterate, I can get it to work, but not using service discovery protocol. I've tried a several different UUIDs and on two different computers, although I only have my HTC Incredible to test with. I've also heard some rumors that the BT stack wasn't working on the HTC Droid, but that isn't the case, at least, for PC interaction.

  Read the article

• Why won't this hit test fire a second time? wpf

  - by csciguy

  All, I have a main window that contains two custom objects (AnimatedCharacter). These objects are nothing but images. These images might contain transparent portions. One of these objects slightly overlaps the other object. There is a listener attached to the main window and is as follows. private void Window_MouseLeftButtonUp_1(object sender, MouseButtonEventArgs e) { Point pt = e.GetPosition((UIElement)sender); //store off the mouse pt hitPointMouse = pt; //clear the result list hitResultsSubList.Clear(); EllipseGeometry m_egHitArea = new EllipseGeometry(pt, 1, 1); VisualTreeHelper.HitTest(sender as Visual, HitTestFilterFuncNew, new HitTestResultCallback(HitTestCallback), new GeometryHitTestParameters(m_egHitArea)); //Check all sub items you have now hit if (hitResultsSubList.Count > 0) { CheckSubHitItems(hitResultsSubList); } } The idea is to filter out only a select group of items (called AnimatedCharacters). The hittest and filters are as follows public HitTestResultBehavior HitTestCallback(HitTestResult htrResult) { IntersectionDetail idDetail = ((GeometryHitTestResult)htrResult).IntersectionDetail; switch (idDetail) { case IntersectionDetail.FullyContains: return HitTestResultBehavior.Continue; case IntersectionDetail.Intersects: return HitTestResultBehavior.Continue; case IntersectionDetail.FullyInside: return HitTestResultBehavior.Continue; default: return HitTestResultBehavior.Stop; } } public HitTestFilterBehavior HitTestFilterFuncNew(DependencyObject potentialHitTestTarget) { if (potentialHitTestTarget.GetType() == typeof(AnimatedCharacter)) { hitResultsSubList.Add(potentialHitTestTarget as AnimatedCharacter); } return HitTestFilterBehavior.Continue; } This returns me back a list (called hitResultsSubList) that I attempt to then process further. I want to take everything in the hitResultsSubList and run a hit test on it again. This time, the hit test will be checking alpha levels on the particular animatedCharacter object. private void CheckSubHitItems(List<DependencyObject> hitResultsSub) { for(int i = 0; i<hitResultsSub.Count; i++) { hitResultsList.Clear(); AnimatedCharacter ac = hitResultsSub[i] as AnimatedCharacter; try { //DEBUGGER SKIPS THIS NEXT LINE EVERY SINGLE TIME. VisualTreeHelper.HitTest(ac, null, new HitTestResultCallback(hitCallBack), new PointHitTestParameters(hitPointMouse)); } catch (Exception e) { System.Diagnostics.Debug.WriteLine(e.StackTrace); } if (hitResultsList.Count > 0) { //do something here } } } Here is my problem now. The hit test in the second function (CheckSubHitItems) never gets called. There are definitely items (DependencyObjects of the type AnimatedCharacter) in the hitResultSub, but no matter what, the second hit test will not fire. I can walk the for loop fine, but when that line is hit, I get the following console statement. Step into: Stepping over non-user code 'System.MulticastDelegate.CtorClosed' No exceptions are thrown. Any help is appreciated.

  Read the article

< Previous Page | 219 220 221 222 223 224 225 226 227 228 229 230  | Next Page >