Search Results

Search found 62094 results on 2484 pages for 'message system'.

Page 224/2484 | < Previous Page | 220 221 222 223 224 225 226 227 228 229 230 231  | Next Page >

  • How to determine the port numbers for peripheral devices?

    - by smwikipedia
    I know that peripheral devices such as a hard driver, a floppy driver, etc are controlled by reading/writing certain control registers on their device controllers. I am wondering about the following questions: Is it true that when these peripheral devices are plugged onto the computer, the addresses(port numbers) of their control registers are thus determined by how they are attached to the address bus (i.e. the hard-wiring rules, not any soft things)? Who makes the scheme of the port number assignment? If I was given a naked computer(with no operating system and with many peripheral devices), how could I figure out the port number assignment so I can use them to control peripheral deveices. At last and as usual, thanks for your patience and reply. 8^)

    Read the article

  • How to determine the port numbers for peripherals devices?

    - by smwikipedia
    I know that peripheral devices such as a hard driver, a floppy driver, etc are controlled by reading/writing certain control registers on their device controllers. I am wondering about the following questions: Is it true that when these peripheral devices are plugged onto the computer, the addresses(port numbers) of their control registers are thus determined by how they are attached to the address bus (i.e. the hard-wiring)? Who makes the scheme of the port number assignment? If I was given a naked computer(with no operating system and with many peripheral devices), how could I figure out the port number assignment so I can use them to control peripheral deveices.

    Read the article

  • Get File Size of Modified Image Before Writing to Disk

    - by Otaku
    I'm doing a conversion from .jpg to .png in System.Drawing and one thing that I've found is that this conversion tends to make the resulting converted .png much larger than the .jpg original. Sometimes more than 10x larger after converting to .png. Given that seems to always be the case (unless you know of a way around this), is there any way to determine the file size of that .png before it is saved to disk? For example, maybe write it to a stream first and then get that stream size? How would I go about doing this?

    Read the article

  • What is the difference between IEditableObject and IRevertibleChangeTracking?

    - by open-collar
    What is the difference between IEditableObject and IRevertibleChangeTracking (both from the System.ComponentModel namespace)? It looks as if the first supports explicit transaction whilst the second is more implicit - but the net result is the same. How should I go about implementing this in code? At the moment I do nothing in BeginEdit and call RejectChanges and AcceptChanges in EndEdit and CancelEdit respectively. My problem is that this will also accept the changes made prior to the BeginEdit. Is that really what MS wanted or am I trying to implement two mutually exclusive interfaces?

    Read the article

  • How to bring coordination between file system and database?

    - by Lock up
    I am working on a online file management project. We are storing references on the database (sql server) and files data on the on file system. We are facing a problem of coordination between file system and database while we are uploading a file and also in case of deleting a file. First we create a reference in the database or store files on file system. The problem is that if I create a reference in the database first and then store a file on file system, but while storing files on the file system any type of error occur, then the reference for that file is created in the database but no file data exist on the file system. Please give me some solution how to deal with such situation. I am badly in need of it. This case happens also while we deleting a file?

    Read the article

  • Using an embedded DB (SQLite / SQL Compact) for Message Passing within an app?

    - by wk1989
    Hello, Just out of curiosity, for applications that have a fairly complicated module tree, would something like sqlite/sql compact edition work well for message passing? So if I have modules containing data such as: \SubsystemA\SubSubSysB\ModuleB\ModuleDataC, \SubSystemB\SubSubSystemC\ModuleA\ModuleDataX Using traditional message passing/routing, you have to go through intermediate modules in order to pass a message to ModuleB to request say ModuleDataC. Instead of doing that, if we we simply store "\SubsystemA\SubSubSysB\ModuleB\ModuleDataC" in a sqlite database, getting that data is as simple as a sql query and needs no routing and passing stuff around. Has anyone done this before? Even if you haven't, do you foresee any issues & performance impact? The only concern I have right now would be the passing of custom types, e.g. if ModuleDataC is a custom data structure or a pointer, I'll need some way of storing the data structure into the DB or storing the pointer into the DB. Thanks, JW EDIT One usage case I haven't thought about is when you want to send a message from ModuleA to ModuleB to get ModuleB to do something rather than just getting/setting data. Is it possible to do this using an embedded DB? I believe callback from the DB would be needed, how feasible is this?

    Read the article

  • Disk IO Performance Limitations based on numbers of folders/files

    - by Josh
    I have an application where users are allowed to upload images to the server. Our Web Server is a windows 2008 server and we have a site (images.mysite.com) that points to a shared drive on a unix box. The code used to do the uploading is C# 3.5. The system currently supports a workflow where after a threshold is met a new subfolder can be generated. The question we have is how many files and/or subfolders can you have in a single folder before there is a degredation in performance - in serving the images up through IIS 7 and reading/writing through code?

    Read the article

  • Qt: How to use QTimer to print a message to a QTextBrowser every 10 seconds?

    - by Aaron McKellar
    Hello, I have working at this for hours and cannot figure it out nor can I find any help online that works. Basically the gist of what I am trying to accomplish is to have a Qt GUI with a button and a QTextBrowser. When I push the button I want it to diplay a message and then keep printing this message every 10 seconds. I figured I would use QTimer because it makes sense to have a timer to diplay the message every 10 seconds. When I originally implemented this into my buttonClicked() SLOT it caused the program to freeze. I looked online for a solution and found QApplication::processEvents(). So basically in my function I had something like this: while(1) { QTimer *timer; connect(...) //omitted parameters for this example timer.start(10000); ui->diplay->append("Message"); while(timer.isActive()) { QApplication::processEvents() } } I figured it would break out of the timer.isActive() while loop but it won't it simply stays in there. So I figured this is a threading issue. So I figured out how to use QThreads but I still can't get it to work. Basically when I create a thread with a timer on it and the thread tells the timer to start, the program closes and the console says "The program has unexpectedly finished". There has to be an easy way to do this but my track record with Qt has always been that th

    Read the article

  • how to bring coordination btween file system and databse?

    - by Lock up
    i am working on a online file management project.In which we are storing references on the database(sql server) and files data on the on file system;.In which we are facing a problem of coordination between file system and database while we are uploading a file and also in case of deleting a file that first we create a reference in the data base or store files on file system;;the problem is that if create a reference in the database first and then storing a file on file system.bur while storing files on the file system any type of error occur.then reference for that file is created in the database but no file data on the file system;; please give me som esolution how to deal with such situation;;i am badly in need of it;; This case is also while we deleting a file?

    Read the article

  • How to prevent illegal file and folder name creation in Windows Server 2003 or Windows Server 2008

    - by Joel Thibeault
    Preventing illegal file and Folder name creation on a Windows 2003/2008 file server is the goal. We know from articles like http://stackoverflow.com/questions/62771/how-check-if-given-string-is-legal-allowed-file-name-under-windows that for some reason the file system allows creation of illegal file/folder chacters and paths that exceed the limitations of Windows. I need the following question answered: How to remove cabability to create file or folder creation in NTFS that contains invalid characters? Can you remove the POSIX subsystem from Windows to fix this issue? How does disabling 8.3 dos name creation factor into this issue? Will any of these fixes prevent linux clients from creating windows compliant files?

    Read the article

  • Writing an OS for Motorola 68K processor. Can I emulate it? And can I test-drive OS development?

    - by ulver
    Next term, I'll need to write a basic operating system for Motorola 68K processor as part of a course lab material. Is there a Linux emulator of a basic hardware setup with that processor? So my partners and I can debug quicker on our computers instead of physically restarting the board and stuff. Is it possible to apply test-driven development technique to OS development? Code will be mostly assembly and C. What will be the main difficulties with trying to test-drive this? Any advice on how to do it?

    Read the article

  • Allocate from buffer in C

    - by Grimless
    I am building a simple particle system and want to use a single array buffer of structs to manage my particles. That said, I can't find a C function that allows me to malloc() and free() from an arbitrary buffer. Here is some pseudocode to show my intent: Particle* particles = (Particle*) malloc( sizeof(Particle) * numParticles ); Particle* firstParticle = <buffer_alloc>( particles ); initialize_particle( firstParticle ); // ... Some more stuff if (firstParticle->life < 0) <buffer_free>( firstParticle ); // @ program's end free(particles); Where <buffer_alloc> and <buffer_free> are functions that allocate and free memory chunks from arbitrary pointers (possibly with additional metadata such as buffer length, etc.). Do such functions exist and/or is there a better way to do this? Thank you!

    Read the article

  • How do you run a .bat file from PHP?

    - by undefined
    Can anyone tell me how to execute a .bat file from a PHP script? I have tried - exec("C:[path to file]"); system("C:[path to file]"); nothing is working. Ive checked the PHP manuals and googled around but cant find a good answer. Anyone know where im going wrong? I'm running windows 2003 server and have successfully manually ran the .bat file and it does what i need it to, I just need to be able to launch it programatically. thanks

    Read the article

  • Grub 'Read Error' - Only Loads with LiveCD

    - by Ryan Sharp
    Problem After installing Ubuntu to complete my Windows 7/Ubuntu 12.04 dual-boot setup, Grub just wouldn't load at all unless I boot from the LiveCD. Afterwards, everything works completely normal. However, this workaround isn't a solution and I'd like to be able to boot without the aid of a disc. Fdisk -l Using the fdisk -l command, I am given the following: Disk /dev/sda: 64.0 GB, 64023257088 bytes 255 heads, 63 sectors/track, 7783 cylinders, total 125045424 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x324971d1 Device Boot Start End Blocks Id System /dev/sda1 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 208896 48957439 24374272 7 HPFS/NTFS/exFAT /dev/sda3 * 48959486 124067839 37554177 5 Extended /dev/sda5 48959488 124067839 37554176 83 Linux Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc0ee6a69 Device Boot Start End Blocks Id System /dev/sdb1 1024208894 1953523711 464657409 5 Extended /dev/sdb3 * 2048 1024206847 512102400 7 HPFS/NTFS/exFAT /dev/sdb5 1024208896 1937897471 456844288 83 Linux /dev/sdb6 1937899520 1953523711 7812096 82 Linux swap / Solaris Partition table entries are not in disk order Disk /dev/sdc: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x292eee23 Device Boot Start End Blocks Id System /dev/sdc1 2048 625141759 312569856 7 HPFS/NTFS/exFAT Bootinfoscript I've used the BootInfoScript, and received the following output: Boot Info Script 0.61 [1 April 2012] ============================= Boot Info Summary: =============================== => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos5)/boot/grub on this drive. => Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos5)/boot/grub on this drive. => Windows is installed in the MBR of /dev/sdc. sda1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /bootmgr /Boot/BCD sda2: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe sda3: __________________________________________________________________________ File system: Extended Partition Boot sector type: Unknown Boot sector info: sda5: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 12.04.1 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdb1: __________________________________________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sdb5: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Boot files: sdb6: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: sdb3: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: According to the info in the boot sector, sdb3 starts at sector 200744960. But according to the info from fdisk, sdb3 starts at sector 2048. According to the info in the boot sector, sdb3 has 823461887 sectors, but according to the info from fdisk, it has 1024204799 sectors. Operating System: Boot files: sdc1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 64.0 GB, 64023257088 bytes 255 heads, 63 sectors/track, 7783 cylinders, total 125045424 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 2,048 206,847 204,800 7 NTFS / exFAT / HPFS /dev/sda2 208,896 48,957,439 48,748,544 7 NTFS / exFAT / HPFS /dev/sda3 * 48,959,486 124,067,839 75,108,354 5 Extended /dev/sda5 48,959,488 124,067,839 75,108,352 83 Linux Drive: sdb _____________________________________________________________________ Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdb1 1,024,208,894 1,953,523,711 929,314,818 5 Extended /dev/sdb5 1,024,208,896 1,937,897,471 913,688,576 83 Linux /dev/sdb6 1,937,899,520 1,953,523,711 15,624,192 82 Linux swap / Solaris /dev/sdb3 * 2,048 1,024,206,847 1,024,204,800 7 NTFS / exFAT / HPFS Drive: sdc _____________________________________________________________________ Disk /dev/sdc: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdc1 2,048 625,141,759 625,139,712 7 NTFS / exFAT / HPFS "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/sda1 A48056DF8056B80E ntfs System Reserved /dev/sda2 A8C6D6A4C6D671D4 ntfs Windows /dev/sda5 fd71c537-3715-44e1-b1fe-07537e22b3dd ext4 /dev/sdb3 6373D03D0A3747A8 ntfs Steam /dev/sdb5 6f5a6eb3-a932-45aa-893e-045b57708270 ext4 /dev/sdb6 469848c8-867a-41b7-b0e1-b813a43c64af swap /dev/sdc1 725D7B961CF34B1B ntfs backup ================================ Mount points: ================================= Device Mount_Point Type Options /dev/sda5 / ext4 (rw,noatime,nodiratime,discard,errors=remount-ro) /dev/sdb5 /home ext4 (rw) =========================== sda5/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd set locale_dir=($root)/boot/grub/locale set lang=en_GB insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.2.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd linux /boot/vmlinuz-3.2.0-29-generic root=UUID=fd71c537-3715-44e1-b1fe-07537e22b3dd ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-29-generic } menuentry 'Ubuntu, with Linux 3.2.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd echo 'Loading Linux 3.2.0-29-generic ...' linux /boot/vmlinuz-3.2.0-29-generic root=UUID=fd71c537-3715-44e1-b1fe-07537e22b3dd ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-29-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root A48056DF8056B80E chainloader +1 } menuentry "Windows 7 (loader) (on /dev/sda2)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root A8C6D6A4C6D671D4 chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sda5/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda5 during installation UUID=fd71c537-3715-44e1-b1fe-07537e22b3dd / ext4 noatime,nodiratime,discard,errors=remount-ro 0 1 # /home was on /dev/sdb5 during installation UUID=6f5a6eb3-a932-45aa-893e-045b57708270 /home ext4 defaults 0 2 # swap was on /dev/sdb6 during installation UUID=469848c8-867a-41b7-b0e1-b813a43c64af none swap sw 0 0 tmpfs /tmp tmpfs defaults,noatime,mode=1777 0 0 -------------------------------------------------------------------------------- =================== sda5: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) = boot/grub/core.img 1 = boot/grub/grub.cfg 1 = boot/initrd.img-3.2.0-29-generic 2 = boot/vmlinuz-3.2.0-29-generic 1 = initrd.img 2 = vmlinuz 1 ======================== Unknown MBRs/Boot Sectors/etc: ======================== Unknown BootLoader on sda3 00000000 63 6f 70 69 61 20 65 20 63 6f 6c 61 41 63 65 64 |copia e colaAced| 00000010 65 72 20 61 20 74 6f 64 6f 20 6f 20 74 65 78 74 |er a todo o text| 00000020 6f 20 66 61 6c 61 64 6f 20 75 74 69 6c 69 7a 61 |o falado utiliza| 00000030 6e 64 6f 20 61 20 63 6f 6e 76 65 72 73 c3 a3 6f |ndo a convers..o| 00000040 20 64 65 20 74 65 78 74 6f 20 70 61 72 61 20 76 | de texto para v| 00000050 6f 7a 4d 61 6e 69 70 75 6c 61 72 20 61 73 20 64 |ozManipular as d| 00000060 65 66 69 6e 69 c3 a7 c3 b5 65 73 20 71 75 65 20 |efini....es que | 00000070 63 6f 6e 74 72 6f 6c 61 6d 20 6f 20 61 63 65 73 |controlam o aces| 00000080 73 6f 20 64 65 20 57 65 62 73 69 74 65 73 20 61 |so de Websites a| 00000090 20 63 6f 6f 6b 69 65 73 2c 20 4a 61 76 61 53 63 | cookies, JavaSc| 000000a0 72 69 70 74 20 65 20 70 6c 75 67 2d 69 6e 73 4d |ript e plug-insM| 000000b0 61 6e 69 70 75 6c 61 72 20 61 73 20 64 65 66 69 |anipular as defi| 000000c0 6e 69 c3 a7 c3 b5 65 73 20 72 65 6c 61 63 69 6f |ni....es relacio| 000000d0 6e 61 64 61 73 20 63 6f 6d 20 70 72 69 76 61 63 |nadas com privac| 000000e0 69 64 61 64 65 41 63 65 64 65 72 20 61 6f 73 20 |idadeAceder aos | 000000f0 73 65 75 73 20 70 65 72 69 66 c3 a9 72 69 63 6f |seus perif..rico| 00000100 73 20 55 53 42 55 74 69 6c 69 7a 61 72 20 6f 20 |s USBUtilizar o | 00000110 73 65 75 20 6d 69 63 72 6f 66 6f 6e 65 55 74 69 |seu microfoneUti| 00000120 6c 69 7a 61 72 20 61 20 73 75 61 20 63 c3 a2 6d |lizar a sua c..m| 00000130 61 72 61 55 74 69 6c 69 7a 61 72 20 6f 20 73 65 |araUtilizar o se| 00000140 75 20 6d 69 63 72 6f 66 6f 6e 65 20 65 20 61 20 |u microfone e a | 00000150 63 c3 a2 6d 61 72 61 4e c3 a3 6f 20 66 6f 69 20 |c..maraN..o foi | 00000160 70 6f 73 73 c3 ad 76 65 6c 20 65 6e 63 6f 6e 74 |poss..vel encont| 00000170 72 61 72 20 6f 20 63 61 6d 69 6e 68 6f 20 61 62 |rar o caminho ab| 00000180 73 6f 6c 75 74 6f 20 70 61 72 61 20 6f 20 64 69 |soluto para o di| 00000190 72 65 63 74 c3 b3 72 69 6f 20 61 20 65 6d 70 61 |rect..rio a empa| 000001a0 63 6f 74 61 72 2e 4f 20 64 69 72 65 63 74 c3 b3 |cotar.O direct..| 000001b0 72 69 6f 20 64 65 20 65 6e 74 72 61 64 61 00 fe |rio de entrada..| 000001c0 ff ff 83 fe ff ff 02 00 00 00 00 10 7a 04 00 00 |............z...| 000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200 =============================== StdErr Messages: =============================== xz: (stdin): Compressed data is corrupt xz: (stdin): Compressed data is corrupt awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in Begging / Appreciation ;) If anything else is required to solve my problem, please ask. My only hopes are that I can solve this, and that doing so won't require re-installation of Grub due to how complicated the procedures are, or that I would be needed to reinstall the OS', as I have done so about six times already since friday due to several other issues I've encountered. Thank you, and good day. System Ubuntu 12.04 64-bit / Windows 7 SP1 64-bit 64GB SSD as boot/OS drive, 1TB HDD as /Home Swap and Steam drive.

    Read the article

  • Using a service registry that doesn’t suck part II: Dear registry, do you have to be a message broker?

    - by gsusx
    Continuing our series of posts about service registry patterns that suck, we decided to address one of the most common techniques that Service Oriented (SOA) governance tools use to enforce policies. Scenario Service registries and repositories serve typically as a mechanism for storing service policies that model behaviors such as security, trust, reliable messaging, SLAs, etc. This makes perfect sense given that SOA governance registries were conceived as a mechanism to store and manage the policies...(read more)

    Read the article

  • What is a name for a job where you do system analysis, project management and data diagramming?

    - by David Archer
    In the last 4 months I've been able to manage a team and step away from the coding for a bit. I've been planning the system in full (both System Analysis and project managing, alongside action and data diagramming) writing the technical documentation, the code's architecture, keeping track of the other guys doing the actual coding, QA, bug reports and dealing with clients. I had to take two days' training on node.js just to see if it would be suitable for a project we were considering. Is there a name for this job? Project Manager and Systems Architect don't quite seem to have the same stuff, and IT manager seems way off. I only want to know so that I can get some qualification towards it and try to move into this kind of work full-time.

    Read the article

  • xcopy file, suppress &ldquo;Does xxx specify a file name&hellip;&rdquo; message

    - by MarkPearl
    Today we had an interesting problem with file copying. We wanted to use xcopy to copy a file from one location to another and rename the copied file but do this impersonating another user. Getting the impersonation to work was fairly simple, however we then had the challenge of getting xcopy to work. The problem was that xcopy kept prompting us with a prompt similar to the following… Does file.xxx specify a file name or directory name on the target (F = file, D = directory)? At which point we needed to press ‘Y’. This seems to be a fairly common challenge with xcopy, as illustrated by the following stack overflow link… One of the solutions was to do the following… echo f | xcopy /f /y srcfile destfile This is fine if you are running from the command prompt, but if you are triggering this from c# how could we daisy chain a bunch of commands…. The solution was fairly simple, we eventually ended up with the following method… public void Copy(string initialFile, string targetFile) { string xcopyExe = @"C:\windows\system32\xcopy.exe"; string cmdExe = @"C:\windows\system32\cmd.exe"; ProcessStartInfo p = new ProcessStartInfo(); p.FileName = cmdExe; p.Arguments = string.Format(@"/c echo f | {2} {0} {1} /Y", initialFile, targetFile, xcopyExe); Process.Start(p); } Where we wrapped the commands we wanted to chain as arguments and instead of calling xcopy directly, we called cmd.exe passing xcopy as an argument.

    Read the article

  • I am receiving a message saying I have duplicate sources but I can't seem to find a duplicate of the line described, any ideas?

    - by David Griffiths
    I receive this meassage when I run sudo apt-get update in the terminal:- Duplicate sources.list entry http://archive.canonical.com/ubuntu/ precise/partner i386 Packages (/var/lib/apt/lists/archive.canonical.com_ubuntu_dists_precise_partner_binary-i386_Packages) So i ran the command gksu gedit /etc/apt/sources.list and checked the source to find there was no duplicate, not that I can see anyway. Here is the source:- # deb cdrom:[Ubuntu 12.04 LTS _Precise Pangolin_ - Release i386 (20120423)]/ precise main restricted deb-src http://archive.ubuntu.com/ubuntu precise main restricted #Added by software-properties # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. deb http://gb.archive.ubuntu.com/ubuntu/ precise main restricted deb-src http://gb.archive.ubuntu.com/ubuntu/ precise restricted main multiverse universe #Added by software-properties ## Major bug fix updates produced after the final release of the ## distribution. deb http://gb.archive.ubuntu.com/ubuntu/ precise-updates main restricted deb-src http://gb.archive.ubuntu.com/ubuntu/ precise-updates restricted main multiverse universe #Added by software-properties ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. deb http://gb.archive.ubuntu.com/ubuntu/ precise universe deb http://gb.archive.ubuntu.com/ubuntu/ precise-updates universe ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. deb http://gb.archive.ubuntu.com/ubuntu/ precise multiverse deb http://gb.archive.ubuntu.com/ubuntu/ precise-updates multiverse ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. deb http://gb.archive.ubuntu.com/ubuntu/ precise-backports main restricted universe multiverse deb-src http://gb.archive.ubuntu.com/ubuntu/ precise-backports main restricted universe multiverse #Added by software-properties deb http://security.ubuntu.com/ubuntu precise-security main restricted deb-src http://security.ubuntu.com/ubuntu precise-security restricted main multiverse universe #Added by software-properties deb http://security.ubuntu.com/ubuntu precise-security universe deb http://security.ubuntu.com/ubuntu precise-security multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. deb http://archive.canonical.com/ubuntu precise partner # deb-src http://archive.canonical.com/ubuntu precise partner ## Uncomment the following two lines to add software from Ubuntu's ## 'extras' repository. ## This software is not part of Ubuntu, but is offered by third-party ## developers who want to ship their latest software. # deb http://extras.ubuntu.com/ubuntu precise main # deb-src http://extras.ubuntu.com/ubuntu precise main deb http://repository.spotify.com stable non-free I can see there are two lines of deb http://archive.canonical.com/ubuntu precise partner but one has #deb-src at the beginning of it. Hashed out no? I'm quite new to linux OS and have little to none sourced editing skills so any help would be most appreciated. Thank you:)

    Read the article

  • OSX 10.6 Cisco IPSEC strange behavior

    - by tair
    I'm trying to connect to Cisco IPSEC VPN of my company over DSL Internet. I managed to successfully connect using Cisco VPN Client, now I'm trying to switch to OSX 10.6 native client, because of licensing issues. The problems is that the connection fails with a dialog box containing the message: The negotiation with the VPN server failed. Verify the server address and try reconnecting. I checked logs: Jun 29 13:10:39 racoon[4551]: Connecting. Jun 29 13:10:39 racoon[4551]: IKE Packet: transmit success. (Initiator, Aggressive-Mode message 1). Jun 29 13:10:39 racoon[4551]: IKEv1 Phase1 AUTH: success. (Initiator, Aggressive-Mode Message 2). Jun 29 13:10:39 racoon[4551]: IKE Packet: receive success. (Initiator, Aggressive-Mode message 2). Jun 29 13:10:39 racoon[4551]: IKEv1 Phase1 Initiator: success. (Initiator, Aggressive-Mode). Jun 29 13:10:39 racoon[4551]: IKE Packet: transmit success. (Initiator, Aggressive-Mode message 3). Jun 29 13:10:42 racoon[4551]: IKE Packet: transmit success. (Mode-Config message). Jun 29 13:10:42 racoon[4551]: IKEv1 XAUTH: success. (XAUTH Status is OK). Jun 29 13:10:42 racoon[4551]: IKE Packet: transmit success. (Mode-Config message). Jun 29 13:10:42 racoon[4551]: IKEv1 Config: retransmited. (Mode-Config retransmit). Jun 29 13:10:42 racoon[4551]: IKE Packet: receive success. (MODE-Config). Jun 29 13:10:42 configd[19]: event_callback: Address added. previous interface setting (name: en1, address: 192.168.1.107), current interface setting (name: u92.168.54.147, subnet: 255.255.255.0, destination: 192.168.54.147). Jun 29 13:10:42 configd[19]: network configuration changed. Jun 29 13:10:42 vmnet-bridge[111]: Dynamic store changed Jun 29 13:10:42 named[62]: not listening on any interfaces Jun 29 13:10:58: --- last message repeated 1 time --- Jun 29 13:10:58 configd[19]: SCNCController: Disconnecting. (Connection tried to negotiate for, 16 seconds). Jun 29 13:10:58 racoon[4551]: IKE Packet: transmit success. (Information message). Jun 29 13:10:58 racoon[4551]: IKEv1 Information-Notice: transmit success. (Delete ISAKMP-SA). Jun 29 13:10:58 racoon[4551]: Disconnecting. (Connection tried to negotiate for, 19.113382 seconds). Jun 29 13:10:58 named[62]: not listening on any interfaces Jun 29 13:10:58 vmnet-bridge[111]: Dynamic store changed Jun 29 13:10:58 named[62]: not listening on any interfaces Jun 29 13:10:58 configd[19]: network configuration changed. Then I opened Terminal, started pinging a server behind VPN, and tried to connect again. Now connection is OK! Logs this time: Jun 29 13:46:53 racoon[8136]: Connecting. Jun 29 13:46:53 racoon[8136]: IKE Packet: transmit success. (Initiator, Aggressive-Mode message 1). Jun 29 13:46:53 racoon[8136]: IKEv1 Phase1 AUTH: success. (Initiator, Aggressive-Mode Message 2). Jun 29 13:46:53 racoon[8136]: IKE Packet: receive success. (Initiator, Aggressive-Mode message 2). Jun 29 13:46:53 racoon[8136]: IKEv1 Phase1 Initiator: success. (Initiator, Aggressive-Mode). Jun 29 13:46:53 racoon[8136]: IKE Packet: transmit success. (Initiator, Aggressive-Mode message 3). Jun 29 13:46:56 racoon[8136]: IKE Packet: transmit success. (Mode-Config message). Jun 29 13:46:56 racoon[8136]: IKEv1 XAUTH: success. (XAUTH Status is OK). Jun 29 13:46:56 racoon[8136]: IKE Packet: transmit success. (Mode-Config message). Jun 29 13:46:56 racoon[8136]: IKEv1 Config: retransmited. (Mode-Config retransmit). Jun 29 13:46:56 racoon[8136]: IKE Packet: receive success. (MODE-Config). Jun 29 13:46:56 configd[19]: event_callback: Address added. previous interface setting (name: en1, address: 192.168.1.107), current interface settinaddress: 192.168.54.149, subnet: 255.255.255.0, destination: 192.168.54.149). Jun 29 13:46:56 vmnet-bridge[111]: Dynamic store changed Jun 29 13:46:56 named[62]: not listening on any interfaces Jun 29 13:46:56 configd[19]: network configuration changed. Jun 29 13:46:56 named[62]: not listening on any interfaces Jun 29 13:46:56 racoon[8136]: IKE Packet: transmit success. (Initiator, Quick-Mode message 1). Jun 29 13:46:56 racoon[8136]: IKE Packet: receive success. (Initiator, Quick-Mode message 2). Jun 29 13:46:56 racoon[8136]: IKE Packet: transmit success. (Initiator, Quick-Mode message 3). Jun 29 13:46:56 racoon[8136]: IKEv1 Phase2 Initiator: success. (Initiator, Quick-Mode). Jun 29 13:46:56 racoon[8136]: Connected. Jun 29 13:46:56 configd[19]: SCNCController: Connected. I tested it several times and it consistently behaves the same. What is the magic?

    Read the article

  • Answers to “What source control system do you use?” (and some winners)

    - by jamiet
    About a month ago I posed a question here on my blog SQL Server devs–what source control system do you use, if any? (answer and maybe win free stuff) in which I asked SQL Server developers to answer the following questions: Are you putting your SQL Server code into a source control system? If so, what source control server software (e.g. TFS, Git, SVN, Mercurial, SourceSafe, Perforce) are you using? What source control client software are you using (e.g. TFS Team Explorer, Tortoise, Red Gate SQL Source Control, Red Gate SQL Connect, Git Bash, etc…)? Why did you make those particular software choices? Any interesting anecdotes to share in regard to your use of source control and SQL Server? I had some really great responses (I highly recommend going and reading them). I promised that the five best, most thought-provoking, responses (as determined by me) would win one of five pairs of licenses for Red Gate SQL Source Control and Red Gate SQL Connect; here are the five that I chose (note that if you responded but did not leave a means of getting in touch then you weren’t considered for one of the prizes – sorry): In general, I don't think the management overhead and licensing cost associated with TFS is worthwhile if all you're doing is using source control. To get value from TFS, at a minimum you need to be using team build, and possibly other stuff as well, such as the sharepoint integration. If that's all you need, then svn with Tortoise would be my first choice. If you want to add build automation later, you can do this with cruisecontrol (is it still called that?), JetBrains, etc. For a long time I thought that Redgate's claims about "bridging the SSMS-VS divide" were a load of hot air, since in my experience anyone who knew what they were doing was using Visual Studio, in particular SSDT and its predecessors. However, on a recent client I was putting in source control for the first time, and I discovered that the "divide" really does exist. That client has ended up using svn with Redgate SQL Source Control, with no build automation, but with scope to add it in the future. Gavin Campbell I think putting the DB under source control is a great idea.  I have issues with the earlier versions of SQL Source Control in that it provides little help in versioning the DB. I think the latest version merges SQL Compare and SQL Source Control together.  Which is how it should have been all along. Sure I have the DB scripts in SVN, but I can't automate DB builds and changes without more tools.  Frankly I'm surprised databases don't have some sort of versioning built into them. Nick Portelli Source control has been immensely useful and saved me from a lot of rework on more than one occasion.  I have learned that you have to be extremely careful checking in data.  Our system is internal only so during the system production run once a week, if there is a problem that I can fix easily(for example, a control table points to a file in the wrong environment), I'll do it directly in production so the run can continue as soon as possible since we have a specified time window.  We do full test runs to minimize this but it has come up once or twice.  We use Red-Gate source control to "push" from the test environment to the production environment.  There have been a couple of occasions where the test environment with the wrong setting was pushed back over the production environment because the change was made only in production.  Gotta keep an eye on that. Alan Dykes Goodness is it manual.  And can be extremely painful at times.  Not only are we running thin, we are constrained on the tools we can get ($$ must mean free).  Certainly no excuse, and a great opportunity to improve my skills by learning new things.  But...  Getting buy in a on a proven process or methodology is hard, takes time, and diverts us from development.  If SQL Source Control is easy to use and proven oh boy could you get some serious fans around here!  Seriously though, as the "accidental dba" of this shop any new ideas / easy to implement tools can make a world of difference in productivity and most importantly accuracy.  Manual = bad. :) John Hennesey (who left his email address) The one thing I would love to know more about is the unique challenges of working with databases as source code - you can store scripts, but are they written as deployment scripts with all the logic about how to apply them to an existing DB? Where is that baseline DB? Where's the data? How does a team share the data and the code? It's a real challenge. Merrill Aldrich Congratulations to the five of you. Red Gate will be in touch with you soon about your free licenses. Thank you to all those that responded. And again, go and check out all the responses – those above are only small proportion from what is a very interesting comment thread. @Jamiet

    Read the article

  • 'Table' cannot have children of type 'ListViewDataItem'

    - by kazim sardar mehdi
    I was using System.Web.UI.WebControls.Table System.Web.UI.WebControlsTableRow System.Web.UI.WebControls.TableCell objects inside LayoutTemplate’s InstantiateIn method that’s inherited from ITemplateas stated below:Table = new Table(); when compile got the following error on the YPOD(Yellow page of Death) 'Table' cannot have children of type 'ListViewDataItem'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.ArgumentException: 'Table' cannot have children of type 'ListViewDataItem'.   Solution:   I Replaced System.Web.UI.WebControls.Table System.Web.UI.WebControls.TableRow System.Web.UI.WebControls.TableCell withSystem.Web.UI.HtmlControls.HtmlTable System.Web.UI.HtmlControls.HtmlTableRow System.Web.UI.HtmlControls.HtmlTableCell and problem solved.

    Read the article

  • OSX 10.6 Cisco IPSEC strange behavior

    - by tair
    I'm trying to connect to Cisco IPSEC VPN of my company over DSL Internet. I managed to successfully connect using Cisco VPN Client, now I'm trying to switch to OSX 10.6 native client, because of licensing issues. The problems is that the connection fails with a dialog box containing the message: The negotiation with the VPN server failed. Verify the server address and try reconnecting. I checked logs: Jun 29 13:10:39 racoon[4551]: Connecting. Jun 29 13:10:39 racoon[4551]: IKE Packet: transmit success. (Initiator, Aggressive-Mode message 1). Jun 29 13:10:39 racoon[4551]: IKEv1 Phase1 AUTH: success. (Initiator, Aggressive-Mode Message 2). Jun 29 13:10:39 racoon[4551]: IKE Packet: receive success. (Initiator, Aggressive-Mode message 2). Jun 29 13:10:39 racoon[4551]: IKEv1 Phase1 Initiator: success. (Initiator, Aggressive-Mode). Jun 29 13:10:39 racoon[4551]: IKE Packet: transmit success. (Initiator, Aggressive-Mode message 3). Jun 29 13:10:42 racoon[4551]: IKE Packet: transmit success. (Mode-Config message). Jun 29 13:10:42 racoon[4551]: IKEv1 XAUTH: success. (XAUTH Status is OK). Jun 29 13:10:42 racoon[4551]: IKE Packet: transmit success. (Mode-Config message). Jun 29 13:10:42 racoon[4551]: IKEv1 Config: retransmited. (Mode-Config retransmit). Jun 29 13:10:42 racoon[4551]: IKE Packet: receive success. (MODE-Config). Jun 29 13:10:42 configd[19]: event_callback: Address added. previous interface setting (name: en1, address: 192.168.1.107), current interface setting (name: u92.168.54.147, subnet: 255.255.255.0, destination: 192.168.54.147). Jun 29 13:10:42 configd[19]: network configuration changed. Jun 29 13:10:42 vmnet-bridge[111]: Dynamic store changed Jun 29 13:10:42 named[62]: not listening on any interfaces Jun 29 13:10:58: --- last message repeated 1 time --- Jun 29 13:10:58 configd[19]: SCNCController: Disconnecting. (Connection tried to negotiate for, 16 seconds). Jun 29 13:10:58 racoon[4551]: IKE Packet: transmit success. (Information message). Jun 29 13:10:58 racoon[4551]: IKEv1 Information-Notice: transmit success. (Delete ISAKMP-SA). Jun 29 13:10:58 racoon[4551]: Disconnecting. (Connection tried to negotiate for, 19.113382 seconds). Jun 29 13:10:58 named[62]: not listening on any interfaces Jun 29 13:10:58 vmnet-bridge[111]: Dynamic store changed Jun 29 13:10:58 named[62]: not listening on any interfaces Jun 29 13:10:58 configd[19]: network configuration changed. Then I opened Terminal, started pinging a server behind VPN, and tried to connect again. Now connection is OK! Logs this time: Jun 29 13:46:53 racoon[8136]: Connecting. Jun 29 13:46:53 racoon[8136]: IKE Packet: transmit success. (Initiator, Aggressive-Mode message 1). Jun 29 13:46:53 racoon[8136]: IKEv1 Phase1 AUTH: success. (Initiator, Aggressive-Mode Message 2). Jun 29 13:46:53 racoon[8136]: IKE Packet: receive success. (Initiator, Aggressive-Mode message 2). Jun 29 13:46:53 racoon[8136]: IKEv1 Phase1 Initiator: success. (Initiator, Aggressive-Mode). Jun 29 13:46:53 racoon[8136]: IKE Packet: transmit success. (Initiator, Aggressive-Mode message 3). Jun 29 13:46:56 racoon[8136]: IKE Packet: transmit success. (Mode-Config message). Jun 29 13:46:56 racoon[8136]: IKEv1 XAUTH: success. (XAUTH Status is OK). Jun 29 13:46:56 racoon[8136]: IKE Packet: transmit success. (Mode-Config message). Jun 29 13:46:56 racoon[8136]: IKEv1 Config: retransmited. (Mode-Config retransmit). Jun 29 13:46:56 racoon[8136]: IKE Packet: receive success. (MODE-Config). Jun 29 13:46:56 configd[19]: event_callback: Address added. previous interface setting (name: en1, address: 192.168.1.107), current interface settinaddress: 192.168.54.149, subnet: 255.255.255.0, destination: 192.168.54.149). Jun 29 13:46:56 vmnet-bridge[111]: Dynamic store changed Jun 29 13:46:56 named[62]: not listening on any interfaces Jun 29 13:46:56 configd[19]: network configuration changed. Jun 29 13:46:56 named[62]: not listening on any interfaces Jun 29 13:46:56 racoon[8136]: IKE Packet: transmit success. (Initiator, Quick-Mode message 1). Jun 29 13:46:56 racoon[8136]: IKE Packet: receive success. (Initiator, Quick-Mode message 2). Jun 29 13:46:56 racoon[8136]: IKE Packet: transmit success. (Initiator, Quick-Mode message 3). Jun 29 13:46:56 racoon[8136]: IKEv1 Phase2 Initiator: success. (Initiator, Quick-Mode). Jun 29 13:46:56 racoon[8136]: Connected. Jun 29 13:46:56 configd[19]: SCNCController: Connected. I tested it several times and it consistently behaves the same. What is the magic?

    Read the article

  • ResponseStatusLine protocol violation

    - by Tom Hines
    I parse/scrape a few web page every now and then and recently ran across an error that stated: "The server committed a protocol violation. Section=ResponseStatusLine".   After a few web searches, I found a couple of suggestions – one of which said the problem could be fixed by changing the HttpWebRequest ProtocolVersion to 1.0 with the command: 1: HttpWebRequest req = (HttpWebRequest)HttpWebRequest.Create(strURI); 2: req.ProtocolVersion = HttpVersion.Version10;   …but that did not work in my particular case.   What DID work was the next suggestion I found that suggested the use of the setting: “useUnsafeHeaderParsing” either in the app.config file or programmatically. If added to the app.config, it would be: 1: <!-- after the applicationSettings --> 2: <system.net> 3: <settings> 4: <httpWebRequest useUnsafeHeaderParsing ="true"/> 5: </settings> 6: </system.net>   If done programmatically, it would look like this: C++: 1: // UUHP_CPP.h 2: #pragma once 3: using namespace System; 4: using namespace System::Reflection; 5:   6: namespace UUHP_CPP 7: { 8: public ref class CUUHP_CPP 9: { 10: public: 11: static bool UseUnsafeHeaderParsing(String^% strError) 12: { 13: Assembly^ assembly = Assembly::GetAssembly(System::Net::Configuration::SettingsSection::typeid); //__typeof 14: if (nullptr==assembly) 15: { 16: strError = "Could not access Assembly"; 17: return false; 18: } 19:   20: Type^ type = assembly->GetType("System.Net.Configuration.SettingsSectionInternal"); 21: if (nullptr==type) 22: { 23: strError = "Could not access internal settings"; 24: return false; 25: } 26:   27: Object^ obj = type->InvokeMember("Section", 28: BindingFlags::Static | BindingFlags::GetProperty | BindingFlags::NonPublic, 29: nullptr, nullptr, gcnew array<Object^,1>(0)); 30:   31: if(nullptr == obj) 32: { 33: strError = "Could not invoke Section member"; 34: return false; 35: } 36:   37: FieldInfo^ fi = type->GetField("useUnsafeHeaderParsing", BindingFlags::NonPublic | BindingFlags::Instance); 38: if(nullptr == fi) 39: { 40: strError = "Could not access useUnsafeHeaderParsing field"; 41: return false; 42: } 43:   44: if (!(bool)fi->GetValue(obj)) 45: { 46: fi->SetValue(obj, true); 47: } 48:   49: return true; 50: } 51: }; 52: } C# (CSharp): 1: using System; 2: using System.Reflection; 3:   4: namespace UUHP_CS 5: { 6: public class CUUHP_CS 7: { 8: public static bool UseUnsafeHeaderParsing(ref string strError) 9: { 10: Assembly assembly = Assembly.GetAssembly(typeof(System.Net.Configuration.SettingsSection)); 11: if (null == assembly) 12: { 13: strError = "Could not access Assembly"; 14: return false; 15: } 16:   17: Type type = assembly.GetType("System.Net.Configuration.SettingsSectionInternal"); 18: if (null == type) 19: { 20: strError = "Could not access internal settings"; 21: return false; 22: } 23:   24: object obj = type.InvokeMember("Section", 25: BindingFlags.Static | BindingFlags.GetProperty | BindingFlags.NonPublic, 26: null, null, new object[] { }); 27:   28: if (null == obj) 29: { 30: strError = "Could not invoke Section member"; 31: return false; 32: } 33:   34: // If it's not already set, set it. 35: FieldInfo fi = type.GetField("useUnsafeHeaderParsing", BindingFlags.NonPublic | BindingFlags.Instance); 36: if (null == fi) 37: { 38: strError = "Could not access useUnsafeHeaderParsing field"; 39: return false; 40: } 41:   42: if (!Convert.ToBoolean(fi.GetValue(obj))) 43: { 44: fi.SetValue(obj, true); 45: } 46:   47: return true; 48: } 49: } 50: }   F# (FSharp): 1: namespace UUHP_FS 2: open System 3: open System.Reflection 4: module CUUHP_FS = 5: let UseUnsafeHeaderParsing(strError : byref<string>) : bool = 6: // 7: let assembly : Assembly = Assembly.GetAssembly(typeof<System.Net.Configuration.SettingsSection>) 8: if (null = assembly) then 9: strError <- "Could not access Assembly" 10: false 11: else 12: 13: let myType : Type = assembly.GetType("System.Net.Configuration.SettingsSectionInternal") 14: if (null = myType) then 15: strError <- "Could not access internal settings" 16: false 17: else 18: 19: let obj : Object = myType.InvokeMember("Section", BindingFlags.Static ||| BindingFlags.GetProperty ||| BindingFlags.NonPublic, null, null, Array.zeroCreate 0) 20: if (null = obj) then 21: strError <- "Could not invoke Section member" 22: false 23: else 24: 25: // If it's not already set, set it. 26: let fi : FieldInfo = myType.GetField("useUnsafeHeaderParsing", BindingFlags.NonPublic ||| BindingFlags.Instance) 27: if(null = fi) then 28: strError <- "Could not access useUnsafeHeaderParsing field" 29: false 30: else 31: 32: if (not(Convert.ToBoolean(fi.GetValue(obj)))) then 33: fi.SetValue(obj, true) 34: 35: // Now return true 36: true VB (Visual Basic): 1: Option Explicit On 2: Option Strict On 3: Imports System 4: Imports System.Reflection 5:   6: Public Class CUUHP_VB 7: Public Shared Function UseUnsafeHeaderParsing(ByRef strError As String) As Boolean 8:   9: Dim assembly As [Assembly] 10: assembly = [assembly].GetAssembly(GetType(System.Net.Configuration.SettingsSection)) 11:   12: If (assembly Is Nothing) Then 13: strError = "Could not access Assembly" 14: Return False 15: End If 16:   17: Dim type As Type 18: type = [assembly].GetType("System.Net.Configuration.SettingsSectionInternal") 19: If (type Is Nothing) Then 20: strError = "Could not access internal settings" 21: Return False 22: End If 23:   24: Dim obj As Object 25: obj = [type].InvokeMember("Section", _ 26: BindingFlags.Static Or BindingFlags.GetProperty Or BindingFlags.NonPublic, _ 27: Nothing, Nothing, New [Object]() {}) 28:   29: If (obj Is Nothing) Then 30: strError = "Could not invoke Section member" 31: Return False 32: End If 33:   34: ' If it's not already set, set it. 35: Dim fi As FieldInfo 36: fi = [type].GetField("useUnsafeHeaderParsing", BindingFlags.NonPublic Or BindingFlags.Instance) 37: If (fi Is Nothing) Then 38: strError = "Could not access useUnsafeHeaderParsing field" 39: Return False 40: End If 41:   42: If (Not Convert.ToBoolean(fi.GetValue(obj))) Then 43: fi.SetValue(obj, True) 44: End If 45:   46: Return True 47: End Function 48: End Class   Technorati Tags: C++,CPP,VB,Visual Basic,F#,FSharp,C#,CSharp,ResponseStatusLine,protocol violation

    Read the article

  • What should be the architecture of an urban game system?

    - by pmichna
    I'm going to develop an urban game using a telco API for phone geolocation and sending/receiving messages. A player would pick up one of the scenarios, move around the city and when he hits a given location, he gets a message and possibly has to answer it. I'm wondering, what approach would be the best in my case. I came up with this general idea: Web application as a user interface (user registration, players ranking, scenarios editing) written in Ruby on Rails. Game server (hosting games, game logic like checking players location, sending and receiving messages) written in Ruby. Database (users, scores, scenarios etc.), probably MySQL or someother open source DB. I want to learn Ruby and RoR, that's why I chose these language and framework. Do you think it's a good choice for a game server? Another question: is this project division good? I mean, I have little experience with Ruby and Rails - that's why I'm asking. Maybe it's better to have web application merged with game server and somehow have the server hosting RoR application do the tasks like mobile phone pinging and message sending? How would that be performed? Maybe this is worth mentioning: the API is RESTful, most results are JSON, few are XML.

    Read the article

  • Why is my Ubuntu system not using the correct kernel?

    - by Brooks Moses
    We're having a bit of confusion on a Ubuntu remote system -- /boot/grub/menu.lst suggests the system should boot into kernel 2.6.35-30-generic, but it is actually running kernel 2.6.32-27-generic. Where should I look to start figuring out why this is happening and how to fix it? Specifically, /boot/grub/menu.lst has default 0 and the first entry is title Ubuntu 10.10, kernel 2.6.35-30-generic uuid 67717ee3-cbf9-45d2-ae97-820256f4c4fd kernel /boot/vmlinuz-2.6.35-30-generic root=UUID=67717ee3-cbf9-45d2- ae97-820256f4c4fd ro quiet splash initrd /boot/initrd.img-2.6.35-30-generic Further, I've confirmed that /boot/vmlinuz-2.6.35-30-generic and /boot/initrd.img-2.6.35-30-generic exist and have appropriate permissions. Meanwhile, uname -a returns: $ uname -a Linux cuda2 2.6.32-27-generic #49-Ubuntu SMP Thu Dec 2 00:51:09 UTC 2010 x86_64 GNU/Linux Edit: I've also tried re-running update-grub, and rebooting; no luck. Here's the full menu.lst, as requested by a commenter: # menu.lst - See: grub(8), info grub, update-grub(8) # grub-install(8), grub-floppy(8), # grub-md5-crypt, /usr/share/doc/grub # and /usr/share/doc/grub-legacy-doc/. ## default num # Set the default entry to the entry number NUM. Numbering starts from 0, and # the entry number 0 is the default if the command is not used. # # You can specify 'saved' instead of a number. In this case, the default entry # is the entry saved with the command 'savedefault'. # WARNING: If you are using dmraid do not use 'savedefault' or your # array will desync and will not let you boot your system. default 0 ## timeout sec # Set a timeout, in SEC seconds, before automatically booting the default entry # (normally the first entry defined). timeout 3 ## hiddenmenu # Hides the menu by default (press ESC to see the menu) hiddenmenu # Pretty colours #color cyan/blue white/blue ## password ['--md5'] passwd # If used in the first section of a menu file, disable all interactive editing # control (menu entry editor and command-line) and entries protected by the # command 'lock' # e.g. password topsecret # password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/ # password topsecret # # examples # # title Windows 95/98/NT/2000 # root (hd0,0) # makeactive # chainloader +1 # # title Linux # root (hd0,1) # kernel /vmlinuz root=/dev/hda2 ro # # # Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST ### BEGIN AUTOMAGIC KERNELS LIST ## lines between the AUTOMAGIC KERNELS LIST markers will be modified ## by the debian update-grub script except for the default options below ## DO NOT UNCOMMENT THEM, Just edit them to your needs ## ## Start Default Options ## ## default kernel options ## default kernel options for automagic boot options ## If you want special options for specific kernels use kopt_x_y_z ## where x.y.z is kernel version. Minor versions can be omitted. ## e.g. kopt=root=/dev/hda1 ro ## kopt_2_6_8=root=/dev/hdc1 ro ## kopt_2_6_8_2_686=root=/dev/hdc2 ro # kopt=root=UUID=67717ee3-cbf9-45d2-ae97-820256f4c4fd ro ## default grub root device ## e.g. groot=(hd0,0) # groot=67717ee3-cbf9-45d2-ae97-820256f4c4fd ## should update-grub create alternative automagic boot options ## e.g. alternative=true ## alternative=false # alternative=true ## should update-grub lock alternative automagic boot options ## e.g. lockalternative=true ## lockalternative=false # lockalternative=false ## additional options to use with the default boot option, but not with the ## alternatives ## e.g. defoptions=vga=791 resume=/dev/hda5 # defoptions=quiet splash ## should update-grub lock old automagic boot options ## e.g. lockold=false ## lockold=true # lockold=false ## Xen hypervisor options to use with the default Xen boot option # xenhopt= ## Xen Linux kernel options to use with the default Xen boot option # xenkopt=console=tty0 ## altoption boot targets option ## multiple altoptions lines are allowed ## e.g. altoptions=(extra menu suffix) extra boot options ## altoptions=(recovery) single # altoptions=(recovery mode) single ## controls how many kernels should be put into the menu.lst ## only counts the first occurence of a kernel, not the ## alternative kernel options ## e.g. howmany=all ## howmany=7 # howmany=all ## specify if running in Xen domU or have grub detect automatically ## update-grub will ignore non-xen kernels when running in domU and vice versa ## e.g. indomU=detect ## indomU=true ## indomU=false # indomU=detect ## should update-grub create memtest86 boot option ## e.g. memtest86=true ## memtest86=false # memtest86=true ## should update-grub adjust the value of the default booted system ## can be true or false # updatedefaultentry=false ## should update-grub add savedefault to the default options ## can be true or false # savedefault=false ## ## End Default Options ## title Ubuntu 10.10, kernel 2.6.35-30-generic uuid 67717ee3-cbf9-45d2-ae97-820256f4c4fd kernel /boot/vmlinuz-2.6.35-30-generic root=UUID=67717ee3-cbf9-45d2-ae97-820256f4c4fd ro quiet splash initrd /boot/initrd.img-2.6.35-30-generic title Ubuntu 10.10, kernel 2.6.35-30-generic (recovery mode) uuid 67717ee3-cbf9-45d2-ae97-820256f4c4fd kernel /boot/vmlinuz-2.6.35-30-generic root=UUID=67717ee3-cbf9-45d2-ae97-820256f4c4fd ro single initrd /boot/initrd.img-2.6.35-30-generic title Ubuntu 10.10, kernel 2.6.32-32-server uuid 67717ee3-cbf9-45d2-ae97-820256f4c4fd kernel /boot/vmlinuz-2.6.32-32-server root=UUID=67717ee3-cbf9-45d2-ae97-820256f4c4fd ro quiet splash initrd /boot/initrd.img-2.6.32-32-server title Ubuntu 10.10, kernel 2.6.32-32-server (recovery mode) uuid 67717ee3-cbf9-45d2-ae97-820256f4c4fd kernel /boot/vmlinuz-2.6.32-32-server root=UUID=67717ee3-cbf9-45d2-ae97-820256f4c4fd ro single initrd /boot/initrd.img-2.6.32-32-server title Ubuntu 10.10, kernel 2.6.32-27-generic uuid 67717ee3-cbf9-45d2-ae97-820256f4c4fd kernel /boot/vmlinuz-2.6.32-27-generic root=UUID=67717ee3-cbf9-45d2-ae97-820256f4c4fd ro quiet splash initrd /boot/initrd.img-2.6.32-27-generic title Ubuntu 10.10, kernel 2.6.32-27-generic (recovery mode) uuid 67717ee3-cbf9-45d2-ae97-820256f4c4fd kernel /boot/vmlinuz-2.6.32-27-generic root=UUID=67717ee3-cbf9-45d2-ae97-820256f4c4fd ro single initrd /boot/initrd.img-2.6.32-27-generic title Chainload into GRUB 2 root 67717ee3-cbf9-45d2-ae97-820256f4c4fd kernel /boot/grub/core.img title Ubuntu 10.10, memtest86+ uuid 67717ee3-cbf9-45d2-ae97-820256f4c4fd kernel /boot/memtest86+.bin ### END DEBIAN AUTOMAGIC KERNELS LIST To add complication and joy to my life, this is a desktop machine in a remote datacenter; we don't have either local access or serial-console access. Suggestions?

    Read the article

< Previous Page | 220 221 222 223 224 225 226 227 228 229 230 231  | Next Page >