Search Results

Search found 9410 results on 377 pages for 'simulator difference'.

Page 224/377 | < Previous Page | 220 221 222 223 224 225 226 227 228 229 230 231  | Next Page >

• VPS showing low disk space despite there is nothing major on it

  - by SheoNarayyan

  Hello experts, On my VPS server I was trying to see the used disk space and when I open My Computer it shows 17.9 GB free out of 39.8 GB it means that 21.9 GB space is used. However, when I select all files and folders from C: and try to see the total size, it just count approximately 11 GB. The difference is around 10 GB. Where is this 10 GB going if I have not stored anything else here? I asked above question from my VPS provider and he responded below Check hidden files/system files/etc. This is default windows OS and its utilization and not specific to setup. If you want specifics of usage, you can go ahead and get in touch with Microsoft support team and they'll provide you with exact specification of the same. I am sure that Windows OS must not be taking up 10 GB space for hidden files and folders. My VPS has Windows Server 2008 R2 installed. Can anyone help me in this on who is right?

  Read the article

• System File Checker vs Service Pack Reinstall

  - by Nixphoe

  When trying to repair slow workstations, I've found that running sfc /scannow helps quite a lot in a few of my environments running really old computers. I've also seen recommendations of reinstalling the last service pack after software installation to help keep the system stable. That makes sense as it would replace a lot of the dll files with the ones that would come with the service pack. They both seem to do the same thing, but SFC some times will ask for a disk, where the Service Pack will not. What is the main difference between the two?

  Read the article

• Fedora 16 Running Hot

  - by sdasdadas

  Since switching from Windows 7 to Fedora 16, my laptop has been running incredibly hot (by the air exhaust). The laptop is an Asus K73S. Running 'sensors', I receive: acpitz-virtual-0: 75.0 celsius nouveau-pci-0100: 66.0 celsius asus-isa-0000: 75.0 celsius The only CPU hog is Firefox at 30 - 40% on average. My GPU information (from lspci) is: Intel Corporation Xeon E3-1200/2nd Generation Core Process or Family Integrated Graphics Controller (rev 09). Running lspci | grep -i VGA, returns: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: nVidia Corporation GF106 [GeForce GT 555M SDDR3] (rev a1) I don't notice a huge difference running without the battery, but it does seem a little cooler. Thanks!

  Read the article

• If a SQL Server Replication Distributor and Subscriber are on the same server, should a PUSH or PULL subsciption be used?

  - by userx

  Thanks in advance for any help. I'm setting up a new Microsoft SQL Server replication and I have the Distributor and Subscriber running on the same server. The Publisher is on a remote server (as it is a production database and MS recommends that for high volumes, the Distributor should be remote). I don't know much about the inner workings of PUSH vs PULL subscriptions, but my gut tells me that a PUSH subscription would be less resource intensive because (1) the Distributor is already remote, so this shouldn't negatively effect the Publisher and (2) pushing the transactions from the Distributor to the Subscriber is more efficient than the Subscriber polling the Distribution database. Does any one have any resources or insight into PUSH vs PULL which would recommend one over the other? Is there really going to be that big of a difference in performance / reliability / security?

  Read the article

• Why should I use $[ EXPR ] instead of $(( EXPR ))?

  - by qdii

  On the paragraph explaining arithmetic expansion, Bash's user guide uncovers 2 different ways of evaluating an expression, the first one uses $((?EXPRESSION?)) and the second one uses $[?EXPRESSION?]. The two ways seem pretty similar as the only difference I have found is: $[?EXPRESSION?] will only calculate the result of EXPRESSION, and do no tests: Yet, I am intrigued because the same document recommends using $[?EXPRESSION?] rather than $((?EXPRESSION?)). Wherever possible, Bash users should try to use the syntax with square brackets: Why would you want that if less tests are being done?

  Read the article

• Will an SSD help prevent laptop overheating?

  - by alex

  My laptop has a severe overheating problem, even though it's quite new (< 6 month). It's still regularly overheating to the point where it shuts down. This usually happens while playing games but sometimes while watching videos or using Skype video calls for a long time. I'm already keeping it mid-air on a cooling tray with 2 external coolers, but that doesn't seem to help. The only other thing I can think of is installing an SSD instead of the current HDD. I've read up that they generate less heat then hard drives, but can it actually make a serious difference to the heat level of the laptop? If there are any other suggestions, please feel free to comment. The laptop is a Toshiba Satellite L650D-11R.

  Read the article

• What is the easiest way to copy Chrome's login/passses into KeePass without creating duplicates?

  - by ldigas

  Okey, here's the thing. I have most of my login info in two places; one is in Keepass file and the other is in Chrome. Being a lazy sort of person, and since Chrome/Keepass integration never really started to work the way it should, a couple times a year I use the Nirsoft tool to get the Chrome login/passwords into a textual .csv file and then import it in Keepass. Creating lots of duplicates in the process which I then clean and so on. In the meantime, all the new logins I accumulate just stay in Chrome. As you might notice, this is not really the best way to do it. Is there a faster way to do this; copy logins from Chrome to Keepass without creating duplicates in Keepass, or has anyone perhaps found a way to get Keepass to work with Chrome under Win XP SP3? Keepass 1.0 or 2.0, doesn't make the difference as long as it works.

  Read the article

• Good Choice of Memory for Asus K52F-BBR5

  - by Christopher Painter

  I recently purchased an Asus K52F-BBR5 notebook. It's a basic laptop with an Intel P6100 CPU and Mobile Intel® HM55 Express Chipset. It came with 3GB of DDR3 SODIMM memory and I'd like to expand it to 8GB. I'm a little confused by DDR3 nomenclature and not up to date on my knowledge of chipsets. I'd like to make a good choice when selecting memory for it. Crucial's database suggests using either a PC3-8500 with CAS 7 or a PC3-10600 with a CAS of 9. Is the 8500 better because of it's CAS 7 or will my chipset run the memory async at a higher speed and get better performance? Which would be a better choice for my chipset and CPU? Price difference is negligble.

  Read the article

• emacs starting maximised

  - by Seamus

  I want a keyboard shortcut to open emacs in a maximised window. I tried emacs --fullscreen, but that is full screen rather than maximised window... That is, the emacs window covers ubuntu menu bars. emacs -fw gets a full width window and emacs -fh gets a full height window, but if you put both options, it only reads the second one. At the moment, I just have another keyboard shortcut for maximising a window. Is there a way to get emacs to start maximised? Ubuntu 9.10, emacs 22, if that makes a difference.

  Read the article

• redirecting HTTPS requests to http in lighttpd

  - by chochim

  I have a lighttpd server running which has an SSL certificate installed. I would, due to certain reasons, like to forward all https: //www. requests to http: //www. My lighttpd code looks like as follows: $SERVER["socket"] == ":443" { ssl.engine = "enable" ssl.pemfile = "/path/to/pem/file" ssl.ca-file = "/path/to/ca/file" HTTP["host"] =~ "^www\.(.*)$" { url.redirect = ("^/(.*)" => "http://www.%1$1") } } Can you please point out the problem here. Another thing, what is the difference between %1 and $1 ?

  Read the article

• Cant connect to home server

  - by user52141

  Trying to figure out what I might be doing wrong. I installed XAMPP - and everything looks fine. If I go to localhost everything comes right up. But when I go to my IP address, I just get a message that the browser could not connect to it. I go into my router and set up port forwarding for port 80 etc, and I even tried putting the server as a DMZ - still nothing. I turned the firewall off to see if that was interfering in some way, then uninstalled it completely for good measure, made no difference. I'm out of ideas.. oh, and yes I have a static IP address.

  Read the article

• initctl respawn does not reload configuration

  - by DELUXEnized

  My upstart service is running with the respawn option. I was hoping that if I deploy a new service config, the config will be loaded, when the service respawns. Neither the initctl reload-configuration command forces a reload, nor the restart command. Only an explicit stop and start reloads the configuration. The problem is, that I can not stop and start the service, at deploy time. The service itself schedules its restart by just shutting down. Is this behavior by design or am I missing something? Would it change anything, if I did the respawn with a second watchdog-service by an explicit start if my service stops? Why is there a difference between an explicit start/stop and the restart command or respawn option. Thanks.

  Read the article

• Some printers are merged into control panel on Windows 7

  - by Bertrand SCHITS

  I install the same printer several times to allow easy selection for users. They just choose the desired printer to have the corresponding functionnality (instead of going to printer properties and change them back and forth): one with double-sided printing, one for draft quality, one for upper tray, etc. On Windows 7, when I install a printer several times, the control panel's printers icons are merged. I then have only one icon for two or three identical printers. I can right-clic on the icon to display the usual menu, and some items of the menu have an arrow to access each printer. This is very missleading for users and admins. I have this behaviour on some computers, when others don't exhibit this. I didn't found what is the difference between computers with and without the problem. Anyone know how to prevent this ?

  Read the article

• RocketRaid gives me studdering computer

  - by Dan

  I have a RocketRaid SanDigital 8U TowerRaid with 8x5900 RPM 2 TB harddrives in a raid 5. When I'm writing data to the drives my computer studders (meaning freezes for a 1/2 second every 2 seconds or so). My screen freezes, my music goes into a loop, its really annoying. I get the same thing in windows 7 as I do in linux. The only difference is it seems to happen less in linux, but occassionally linux will crash (I've never had linux crash for any other reason, so I'm assuming they have poor linux drivers and kernal mod). Any tips for how to deal with this? Thanks

  Read the article

• ESXI 4.0 Slow response in opening anything accross the network on a Virtual Server running Win2008

  - by user40944

  Hi I recently installed a HP ML350G6 Server with Windows Small Business Server 200864bit, Exchange 2007. The server was running fantastically and we transferred all user data onto the new server and no problems for 2 weeks! We then installed SQL2008 and transferred the accounts package onto the server and this is where the problems started. Users are now complaining to open a work document can take 2 minutes and the same with regard to anything else. The server itself seems fine, the virtual server seems fine! No disk performance problems (doesn't go above 50% unless i really copy lots of things), no memory, (12Gb only using 7Gb) cpu (usage is low average about 15%) etc on both the VM and in Windows Task manager. I have made sure disk caching is enabled on the raid controller (which made no difference). Network cards are running 1Gb and plugged into HP GB switch. Please help!

  Read the article

• Restrict subversion to only allow certain functions

  - by Farseeker

  I'm in a bit of a situation. We have our private subversion server that we use for development, but one of our government clients is requesting access to our commit logs so that they can get an up-to-date picture of what we've been doing on the system. I don't have a problem with them reading our commit logs, but what I do have a problem with is them having access to our source code - they can't have read or write. The obvious solution is to do an svn log ourselves and give them an export, but they want direct SVN access as they apparently have an auditing solution that will import the svn log command automagically. So, is there a way I can set up access to a subversion repo and deny them access to everything except svn log? I don't care if I have to set up a virtualhost just for this, but it has to be done over http(s). We're also using LDAP for authentication if that makes any difference.

  Read the article

• USB 3.0 Device not detected in Windows 8

  - by Tek

  About my setup: Windows 8 64-bit. X79-UD3 Motherboard. Latest Windows 8 USB 3.0 Drivers from motherboard manufacturer website. All right so device manager detects my USB 3.0 ports, so all is well there. However when I plug in my external USB 3.0 hard drive, windows doesn't even make a beep; the hard drive is not picked up by device manager at all. The SAME thing happens with Ubuntu 12.10 BUT adding PCI=nomsi (as a workaround) to the Grub command line of the Ubuntu boot option makes Ubuntu 12.10 detect my external hard drive. I also have a few other doubts, if you guys would be kind enough to answer them that include: Should XHCI hand-off in the UEFI bios be enabled or disabled for Windows 8? The difference between XHCI hand-off and EHCI hand-off and what are it's effects on USB 3.0 functionality? And last but not least how can I get Windows 8 to recognize my external hard drive when Ubuntu 12.10 (after the Grub workaround) works fine?

  Read the article

• Network location is not on the Domain

  - by Kyle Brandt

  I have a computer joined to the domain, but it doesn't view the network "location" as being part of the domain. I have tried removing and rejoining the domain and this doesn't help: Other computers in the same network don't have this problem. I have also tried several different icons, including both the train and the airplane which doesn't seem to make a difference. At least using nslookup, the server seems to have connectivity with the DCs in the same site. There also seem to be some errors that suggest a NULL domain: Computer: OR-WEB05.ds.stackexchange.com Description: NtpClient was unable to set a domain peer to use as a time source because of failure in establishing a trust relationship between this computer and the '' domain in order to securely synchronize time. NtpClient will try again in 3473457 minutes and double the reattempt interval thereafter. The error was: The trust relationship between this workstation and the primary domain failed. (0x800706FD)

  Read the article

• SSL encryption standards by browser

  - by hfidgen

  Hiya, Does anyone have a table of the default levels of encryption which the various browsers out there support? For instance I know that IE5 and lower struggle even to cope with 40 bit encryption but the latest browsers easily do 256 and beyond. The reason I ask is that I'm looking to get a wildcard certificate for my domain and the price difference is huge between a server gated certificate (where it enforces a minimum of 128bit) and a non-gated certificate (where the browser sets the encryption level). Obviously I like the idea of paying £300 less for the non-gated certificate, but only if I can be sure that the majority of my users (FF3 / Opera / Chrome / IE7+) are going to get good encryption.

  Read the article

• Why can't I use %USERPROFILE% in %PATH%?

  - by Zano

  On my Windows 7 machine, using the System Properties Environment Variables tool, I try to add %USERPROFILE%\Bin to the system variable PATH. For some reason, that doesn't work, even though %SystemRoot%\system32 works fine. When I try to run commands from the console, files in my Bin folder are not found, even though files in the System32 folder are found. The only difference between UserProfile and SystemRoot that I can see is that the former is a user variable while the latter is a system variable. I i write echo %USERPROFILE%\Bin it yields c:\Users\zano, and if I add c:\Users\zano\Bin explicitly, everything work fine. What's the problem here?

  Read the article

• Application crashes when installing on Windows 7 but not on Windows XP

  - by JiBéDoublevé

  At my company, we're migrating from Windows XP to Windows 7. We've got 2 home made applications written in C# with the .NET framework 3.5. They use ClickOnce to be installed. We're in the test phase and the installation of these soft crashes on some Windows 7 machines and doesn't on others. The difference between these machines should be the configuration of the policies. The only error message we've got is this one: I tried to find some logs somewhere but there's nothing neither in the Event Viewer nor in the applications log (wich are poorly logged, then I'm not expecting miracle from this side :( ) These applications: work with FTP servers use WCF use old deprecated libraries (as I'm not at work, I'll edit this post when I'll have the info) use nHibernate 2 use LLBLGen use a deprecated Infragistics library export data into Excel files Did you encounter such an issue while migrating? Or do you have an idea where I should investigate on?

  Read the article

• Folder Permissions in Windows 7

  - by gameshints

  I'm trying to securely share a folder across two computers on a relatively public network. However, I'm a bit confused on how permissions work and was hoping for some clarification between the following so I don't accidentally make something public I don't want. When you right-click a folder and go to properties, what is the difference between Sharing Tab - 'Share...' button - List of users and permissions there Sharing Tab - 'Advanced Sharing...' button - 'Permissions' button - List of users and permissions there Security Tab - List of users and permissions there Thanks!

  Read the article

• linux - Is Debian "lighter" than Ubuntu?

  - by user2983756

  I currently run Linux Mint 14 KDE on a "semi-old" machine I use for working and surfing the web - it was the first Linux system I ever used (running away from old Win XP), so I picked a complete system that would have most of my basic needs installed (I didn't even know what exactly all those needs were at the time). The thing is, my computer is becoming really old and Mint is a cluttered system, and for the next installation I'm going to try and install a "raw" system and get everything from the online repos. My question is: Since Ubuntu is Debian-based, does that make it consume more resources than its base system? If that isn't the difference, which one is "lighter" in that sense?

  Read the article

• Ctrl Alt Left/Right moves mouse - how to find responsible software?

  - by Unimatrix02

  Hi, I've got a bit of a strange problem. On one of our computers, pressing ctrl + alt + left/right/up/down will move the mouse pointer on the screen, but it's not clear which software makes this happen. It interferes with other software that uses these shortcuts. I've already tried disabling some software, such as WinKey and a Kensington mouse driver, but that didn't make a difference. It's happening on a Windows XP SP3 computer by the way. Does anyone have an idea of how to find the software that traps this shortcut? Suggestions for actual (types of) software that might be doing this are welcome too. Thanks!

  Read the article

• Why Virtualbox VDI doubles the space of the VM hard disk?

  - by logoff

  I have one Xubuntu 12.10 64 bit Virtualbox VM on a Windows 7 64 bit host. It has one dynamic allocated hard disk with VDI format with maximum capacity of 20GB. If I use a command df -h in the VM I get that 5.3GB are in use in th main partition. I have only 2 partitions, one for the ext4 hard disk and another with 512MB of swap. I have no snapshots. The VDI file of this VM has 10.7GB. It is normal this difference of space? It is caused because the VDI format?

  Read the article

< Previous Page | 220 221 222 223 224 225 226 227 228 229 230 231  | Next Page >