Search Results

Search found 6882 results on 276 pages for 'ftp proxy'.

Page 225/276 | < Previous Page | 221 222 223 224 225 226 227 228 229 230 231 232  | Next Page >

• Windows 8 using as a webserver

  - by Jason

  I have a few hobby websites that I currently host on CentOS 6. Apache, mail serving, PHP, MySQL nothing special. In the past I used Windows XP to do this same task, for years, and I was OK. I switched to Linux and for the last few years it has been such a pain. updates break, certain apps only support certain distros without compiling from source. It prevents me from working on my hobby sites more because I am always fixing something. With Windows I locked it down, I run a hardware firewall and packet analyser, kept up on updates and A/V and never had a problem. I dont allow RDC from outside the local LAN, no FTP open, run OpenSSH on an obscure port.. I am considering switching to Windows 8 (since it is a cheaper license now that Windows 7) and running apache, HMailServer, PHP, MySQL, just like my CentOS install. My questions: I am not familiar with Windows 8, can the above be done like XP? No new security restrictions or the OS preventing this from happening? The machine is a Athlon 64-bit X2 with 32GB of RAM. Will Windows 8 see all of the RAM? Technically the machine came with Windows 7, and there is a serial number on it but I am sure I wiped away the Windows 7 recovery partition when I switched to Linux....

  Read the article

• Family server setup [closed]

  - by Manny

  Hi all, I really hope some of you can give me some direction. I have setup a linux server at home and through samba I can access files from different computers in my home. I would like to use this server as a file-server for my family (brothers, sisters and parents who all live in their own homes). I really like the way it is set up right now with user and permission controls, but I've read that it is bad idea to open up the samba port to the world. The requirements are simple: 1) it should be easy to access, by using standard web browsers or mounting the drive (shouldn't have to use any VPN setup or use putty etc) 2) should be somewhat secure. We just want to share family pictures instead of putting them on facebook or picasa or other web server, nothing top secret. Here is what I've looked into: 1)Webdav. It seems decent but seems like it windows7 doesn't like it very much, even with digest mode authentication. User controls and permissions are not as flexible as samba (or at least to my knowledge). I really like the user and group permissions in samba, but if I could live with webdav if it worked seamlessly with windows, it should just work shouldn't it? 2) I read somewhere to stay away from ftp as it is outdated and that there are newer and better internet file-server setups? Was that a reference to webdav? I am so confused, please help... Manny

  Read the article

• Family server setup

  - by Manny

  Hi all, I really hope some of you can give me some direction. I have setup a linux server at home and through samba I can access files from different computers in my home. I would like to use this server as a file-server for my family (brothers, sisters and parents who all live in their own homes). I really like the way it is set up right now with user and permission controls, but I've read that it is bad idea to open up the samba port to the world. The requirements are simple: 1) it should be easy to access, by using standard web browsers or mounting the drive (shouldn't have to use any VPN setup or use putty etc) 2) should be somewhat secure. We just want to share family pictures instead of putting them on facebook or picasa or other web server, nothing top secret. Here is what I've looked into: 1)Webdav. It seems decent but seems like it windows7 doesn't like it very much, even with digest mode authentication. User controls and permissions are not as flexible as samba (or at least to my knowledge). I really like the user and group permissions in samba, but if I could live with webdav if it worked seamlessly with windows, it should just work shouldn't it? 2) I read somewhere to stay away from ftp as it is outdated and that there are newer and better internet file-server setups? Was that a reference to webdav? I am so confused, please help... Manny

  Read the article

• Google Apps: MX records for zonefile

  - by 23tux

  Hi everybody, I have a question about using Google Apps for handling emails. I don't want to set up a whole entire mail system on my server, so I decided to use Google Apps. The ownership of my domain is approved, and now I'm trying to change the MX records in the zone file of my domain. But I think I'm doing wrong, it doesn't work. I want to use mail.mydomain.com as a adress to the mail server for POP, SMTP and IMAP. My zone file looks like this: $TTL 86400 @ IN SOA ns1.first-ns.de. postmaster.robot.first-ns.de. ( 2011011700 ; serial 14400 ; refresh 1800 ; retry 604800 ; expire 86400 ) ; minimum @ IN NS robotns3.second-ns.com. @ IN NS robotns2.second-ns.de. @ IN NS ns1.first-ns.de. @ IN A 111.111.111.111 localhost IN A 127.0.0.1 www IN A 111.111.111.111 ftp IN CNAME www loopback IN CNAME localhost mail IN CNAME @ relay IN CNAME www @ IN MX 10 ALT1.ASPMX.L.GOOGLE.COM. @ IN MX 10 ASPMX3.GOOGLEMAIL.COM. @ IN MX 10 ASPMX2.GOOGLEMAIL.COM. @ IN MX 10 ASPMX.L.GOOGLE.COM. @ IN MX 10 ALT2.ASPMX.L.GOOGLE.COM. I hope someone can figure out, what's wrong with this configuration. When I start a ping on mail.mydomain.org I get an answer from 111.111.111.111 and not from the google server ALT1.ASPMX.L.GOOGLE.COM. thx, tux

  Read the article

• Email delivering but not receiving from Gmail

  - by Karthik Malla

  Host Record type Value 65.75.241.26 / 24 PTR softmail.me. accs.softmail.me. A 65.75.241.26 beta.softmail.me. A 65.75.241.26 ftp.softmail.me. CNAME softmail.me. lists.softmail.me. CNAME softmail.me. mail.softmail.me. A 65.75.241.26 mssql.softmail.me. A 65.75.241.26 ns.softmail.me. A 65.75.241.26 sitebuilder.softmail.me. A 65.75.241.26 softmail.me. NS ns.softmail.me. softmail.me. A 65.75.241.26 softmail.me. MX (10) mail.softmail.me. test.softmail.me. A 65.75.241.26 webmail.softmail.me. A 65.75.241.26 www.accs.softmail.me. CNAME accs.softmail.me. www.beta.softmail.me. CNAME beta.softmail.me. www.softmail.me. CNAME softmail.me. www.test.softmail.me. CNAME test.softmail.me. The above are the DNS settings of my email server and mail incoming/outgoing is done by softmail.me:25/110 using which I am able to send emails but unable to receive. Can anyone tell me where the problem lies at?

  Read the article

• What can I do with a home server?

  - by Joel Coehoorn

  I have an old 700 Mhz Pentium III at home running Windows 2000 Server, with a home router set up to pass incoming requests to it and a DynDNS account set up so it's easy to find. Right now I'm using it for a number of things: Shared folders + backup inside the home network Shared Printer inside the home network Domain Controller, just because I feel like it and because it's useful to me as practice to keep those "enterprise" administration skills. Web Server FTP remote access for my files. I abandoned this for security reasons, but it's still worth leaving visible. Remote Desktop in to the home network (thinking about adding VPN service) SVN repository MySQL - Will be moving to SQL Server 2008 Standard soon. After I upgrade my wife's laptop from home to pro later this year it will also become a domain controller It's the only place I still have access to Internet Explorer 6 any more without setting up a new virtual machine, so I use it for testing code with that browser. The question is: What else could I be doing with this machine? Update Additional ideas based on the suggestions: Media Server/DVR Build server PBX SSH Proxy Server Continuous Integration Server Personal OpenID Provider Update2 Just a note that this server was recently upgraded to an Atom330 with 2 GB ram and bigger hard drive. For all that's slow for a "modern" cpu, it should still be much faster than the old Pentium III and the expected power savings should make the upgrade essentially free over the course of the next year or two. Also, it's now running Windows Server 2008.

  Read the article

• Coldfusion:-Firefox can't establish a connection to the server at localhost

  - by Fransis

  I installed Coldfusion 8 trial version on my system (XP Professional sp3). I created an Folder in the “C:/Coldfusion8/wwwroot” called “buildProject” containing an Index.cfm and some other .cfm files. But I am unable to access the Neither my project files or CFIDE/Administrator I tried the following URLS http://localhost:8500/wwwroot/buildProject/ http://localhost:8500/CFIDE/administrator/index.cfm http:// 127.0.0.1:8500/wwwroot/buildProject/ http:// 127.0.0.1:8500/CFIDE/administrator/index.cfm http://localhost /wwwroot/buildProject/index.cfm http://localhost /CFIDE/administrator/index.cfm http://localhost /wwwroot/buildProject/ http://localhost /CFIDE/administrator/index.cfm Firefox can't establish a connection to the server at 127.0.0.1:8500. The site could be temporarily unavailable or too busy. Try again in a few moments. If you are unable to load any pages, check your computer's network connection. If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web. • I cleared the browsing “History” from both IE and FF. • I have restarted the CF server in the Control Panel Administrative Tools Services • Even restarted the IIS Getting the same error. Further I was trying to access IE/FF via CFbuilder But still I am getting the error “The connection was refused when attempting to contact [URL].” My inetpub is in the D rive where as CF8 is in C drive Also when i check IIS-5 Control Panel Admin tools Services I do not find the Localhost under web sites or FTP sites. Kindly help me with a fix.

  Read the article

• Setting up logging for a remote backup script

  - by Brian Dainis

  So I wrote up a short script that I am planning to run via a cron job daily to package up my site files and send them to a remote location. I also plan to incorporate DB dumps, but I have not gotten that far yet. My issue today however is that Im am uncertain how to log the output of each command for errors, warnings, or other pertinent information the command may output. I would also like to install sometype of fail safe so if something goes horribly wrong the script will stop dead in its tracks and notify me via email or something. Ok the email thing is not as critical, but would be nice. Does anybody have any ideas for that? Here is what I have so far. By the way, both servers are CentOS 6.2 running standard LAMP. #!/bin/sh ################################# ### Set Vars ################################# THEDATE=`date +%m%d%y%H%M` ################################# ### Create Archives ################################# tar -cf /root/backups/files/server_BAK_${THEDATE}.tar -C / var/www/vhosts gzip /root/backups/files/server_BAK_${THEDATE}.tar ################################# ### Send Data to Remote Server ################################# scp /root/backups/files/server_BAK_${THEDATE}.tar.gz user@host:/home/bak1/ftp/backups/ ################################# ### Remove Data from this Server ################################# rm -rf /root/backups/files/server_BAK_${THEDATE}.tar.gz

  Read the article

• File exists but is unreadable by PHP

  - by Aron

  More than once I have ran into this issue: I have a cache file that is automatically generated by PHP. It contains some generated PHP code. However for some reason the file cannot be read and parsed by PHP. These are the symptoms: File actually exists on file system. Using Terminal you can navigate to the file, view its contents (which are fully intact), etcetc. PHP file_exists() will report that the file exists...which is correct since it does :) Then I include() the file. But when actually parsing the file, PHP will just consider it an empty file. No fatal error, just no PHP code actually executed. Again, its as if the file was completely empty (which I assure you, it is not)... It is not a permissions issue. Permissions are set as needed. Workaround: open the file in Terminal via 'nano' or some other text editor and just save it to the disk again. After that (despite no changes to the content) PHP will run it just fine... As a clarification, I'd like to add that this happens rarely, but frequently enough to be a problem. And even when it does, there are hundreds of other similar files on the same system that work without a problem... If this were an issue affecting only my own scripts, I would consider that there must be a bug in the way I generate the PHP code. But no, the issue has occurred more than once when deploying to a server (usually from Beanstalk repository via FTP). The issue has been present on various servers, Debian and Ubuntu running Zend Community Server. Any ideas? One that crossed my mind was opcode cache-ing (part of Zend Server CE)...could it be that an empty version of the file is cached if it is requested while the write operation is still in progress?

  Read the article

• LAN Webserver not accessible through PPTP VPN

  - by Joe

  I have this LAN Network with 10 clients and one server. The server has 4 virtual machines and a BIND DNS Server. When the router assigns an IP through the DHCP , it also gives the ip of the DNS Server, to resolve internal domains. Everything apparently works fine, the clients being able to access the server's vm's resources, but I also have to create the possibility of remote access. I installed the PPTP VPN on the server, and the vpn clients would get the same ip address range as the router's dhcp is assigning. Apparently everything is fine here also, except the fact that when we connect through the vpn , we cannot access the webserver on port 80 ( the webserver being one of the server's VM ). The iptables on the webserver has been turned off for testing purposes and the router's firewall is directing all the external traffic to the server. Can somebody suggest a solution to this? Extra details : VPN Server : PPTP Server Centos 6.3 x64 VPN Client : Windows 7 default PPTP VPN Connection The client is successfully connected to the server, everything works ( FTP/MYSQL/SSH/DNS ) , except the fact that when I try to access the webserver IP on the browser, it won't work.Pinging it works perfectly.

  Read the article

• IPTables configuration help

  - by Sam

  I'm after some help with setting up IPTables. Mostly the configuration is working, but regardless of what I try I cannot allow localhost to access the local Apache only (i.e. localhost to access localhost:80 only). Here is my script: !/bin/bash Allow root to access external web and ftp iptables -t filter -A OUTPUT -p tcp --dport 21 --match owner --uid-owner 0 -j ACCEPT iptables -t filter -A OUTPUT -p tcp --dport 80 --match owner --uid-owner 0 -j ACCEPT Allow DNS queries iptables -A OUTPUT -p udp --dport 53 -j ACCEPT iptables -A OUTPUT -p tcp --dport 53 -j ACCEPT Allow in and outbound SSH to/from any server iptables -A INPUT -p tcp -s 0/0 --dport 22 -j ACCEPT iptables -A OUTPUT -p tcp -d 0/0 --sport 22 -j ACCEPT Accept ICMP requests iptables -A INPUT -p icmp -s 0/0 -j ACCEPT iptables -A OUTPUT -p icmp -d 0/0 -j ACCEPT Accept connections from any local machines but disallow localhost access to networked machines iptables -A INPUT -s 10.0.1.0/24 -j ACCEPT iptables -A OUTPUT -d 10.0.1.0/24 -j DROP Drop ALL other traffic iptables -A OUTPUT -p tcp -d 0/0 -j DROP iptables -A OUTPUT -p udp -d 0/0 -j DROP Now I have tried many permutations and I'm obviously missing everything. I place them above the in/out bound SSH to/from, so it's not the precedence order. If someone could give me the heads up on allowing only the local machine to access the local web server, that'd be great. Cheers guys.

  Read the article

• Can only ssh when not using wifi

  - by AChrapko

  So I have 3 machines, a windows 7 desktop that is always wired to my router, osX laptop, and raspberry pi running debian linux. My router is a Linksys e1000 wireless N. My goal is to be able to ssh the raspi from any machine, while it is connected via wifi. My problem is that when trying to ssh from either the win7 or osX to the Pi it either times out, or gives an error: "ssh: connect to host 192.168.1.### port 22: No route to host" The only times that I have managed to connect to the pi from any machine were when it connected to the router via an Ethernet cable. Currently with win7 desktop wired, macbook wireless, and pi wireless tests give the following: win7 ping macbook: Destination host unreachable. macbook ping win7: Request timeout. win7 ping pi: Destination host unreachable. macbook ping pi: Request timeout. blah blah blah Plugging the macbook into the router with an Ethernet cable all communication between win7 and macbook works. Pings, ssh, ftp, smb ect... No changes to the pi, still no connections possible to or from any of the other 2 machines. Note All machines, are able to connect to the internet and ssh to the same machine on a completely different network, wired or over wifi. Plugging the Pi in with Ethernet (and macbook still wired) I can ssh to the pi from both win7 and macbook. I can ssh from the pi to macbook. All machines still able to connect the the off network machine. Also another little side note- I was playing warcraft 3 with my roommates the other day, and the only time they were able to see my LAN game was when they were plugged into the router with an Ethernet cable. Once or twice one of the laptops was able to connect over wifi, but not without another computer connecting first via Ethernet. So basically does anyone have any info as to why my router seems to completely ignore local wireless traffic?

  Read the article

• How to set up a server without a hosting control panel

  - by A4J

  I have always used a control panel on my dedicated servers - from cPanel to Plesk to Virtualmin, and I am now considering ditching a CP altogether and manually editing config files. My requirements are fairly simple, I will host multiple sites on the server; some Apache with PHP & Mysql and some Passenger with Rails & Postgres. All will require email smtp/pop. FTP/Stats will not be required. Could someone please give me a quick run-down of what I would need to do - in terms of installing software and configuration? My server will come with a base install of CentOS 6.4 minimal. My thoughts so far: Install/update latest versions of MySQL & Postgres (are they 'safe' out of the box? Or do I need to do anything else like set up root passwords etc?) Install Apache & PHP (again, are the base installs good to go or do they require security tweaks?) Set up nameservers/hostnames/reverse DNS etc (Any guides on how to do this please?) Install Rubygems Install and configure Dovecot and Postfix (any tips on doing this? Or links to how-tos that cover it please?) Set up each website - any links to guides on how to do this? Install/configure firewall (or is the default install good to go?) Any other tips or advice would be greatly appreciated, as would links to guides or how-tos.

  Read the article

• How to Monitor Network in Medium-Sized Company?

  - by Kyle Lowry

  I work at a medium sized company (100+ employees). An issue that has been cropping up is network performance, internet access in particular. We have about 70 or more computers, a mix of Mac OS X and Windows XP & 7 machines. We have several servers (Exchange server, PC file servers, MS SQL, Blackberry, FTP, Mac server, etc). There are four main switches, a SonicWall firewall, and probably a couple routers in the server room with a dozen or so more scattered around the building. The network structure has grown organically over a number of years; and, as far as I know, there really isn't a monitoring solution in place. When we experience network issues (slow connections, dropped packets, and so on), our general solution is to power cycle some hardware or go around to each employee and ask them if they are uploading/downloading any large files. This is really inefficient and time consuming, and it does not allow us to monitor the network, tackling potential problems proactively. I would like to find a solution that would allow me to monitor network usage company-wide in real time, with detail going down to the individual computer, ideally. Given the hodgepodge of equipment and operating systems, what would be the best way to set up some kind of monitoring solution? Hardware, software, restructuring our network architecture?

  Read the article

• Windows 7 - "Magic" frequent folder

  - by TheAdamGaskins

  Every week, I export an mp3 file from audacity into a folder with that day's date (e.g. this past sunday I exported the file to a folder named 20130609). Then I close everything and that's it for a while. Then, I come back a few hours later to upload the file to ftp. I usually have some folders open, so to open a new one, I right click on the folder icon on the taskbar... to open a new folder window and browse to this folder I just created, right? Well I look up a little bit and: So I click it and upload the file, and it actually saves me 30 seconds, which is really awesome... but what in the world? It happens every single week without fail. I create the folder inside the audacity export window. The folder stays on the frequent list until I create a new folder the following week. This was definitely not an advertised feature of Windows 7, and it's extremely handy... but it really just seems like magic to me. How does it work?

  Read the article

• "Synchronizing" files between local and remote server using Git

  - by ConcreteVitamin

  My intended goal: I maintain some files in my local computer, and I also share them with others by putting them on my website. In the past I did this by manually uploading all the files using FTP, every time I did some modifications etc. Now, I am wondering if I can use Git to help me achieve this (by "pushing" the local files to my website server). My server is hosted by Dreamhost. First Attempt: First, I try this tutorial. I first push my local files to my Github repo, and ssh into my Dreamhost server to clone --bare from the Github repo. But I find that git does not transfer my files. So I ignore the tutorial. Second Attempt: I ssh into my Dreamhost server to clone directly from Github. My files are all transfered to the server. Then, on my local computer, I git remote add dreamhost ssh://[email protected]/~/my-project. Then I add some files, and commit, and git push dreamhost master. And a bunch of errors appears: http://geotakucovi.com/gitError.jpg As a newbie Git user, I must have missed something. Please help!

  Read the article

• Transfer iptables rules to another server (almost) real time

  - by MrShunz

  I'm running 2 cPanel servers with ConfigServer Security & Firewall plugin. One of the functions of the plugin is to block via iptables (temporarily and/or permanently) IPs which fail various authentications (POP3/IMAP, SMTP, FTP, webmail, mod_security and such). Now, i'd like to push those IP blocks to the border router to drop packets as soon as possible (and doing so protecting the other machines on the network). Keep in mind that after N failed logins IP is blocked for 5 minutes, then re-allowed. If multiple bans occours in an hour IP is blocked permanently and should be unlocked "by hand". So I need a near realtime solution. What I'm looking for is a better way than firing some cronjobs both on cPanels and border router to: dump the rules to file transfer the file to border router (via scp/sftp) load the rules from the file in the border router I'm aware that I will need some scripts to parse and modify the rules as cPanels have one ethernet interface and some aliases while border router has two ehternet interfaces and some loopbacks. All machines involved use Linux. EDIT as per @pjmorse comment. The plugin consists of a bunch of perl and config files. The part I'm intrested in is a process which scans logfiles (lfd) and installs iptables rules (and sends an alert email). Fact is, it upgrades quite often (one or two times a week) and itself is 7000 lines of perl so I'm not comfortable on tampering with it.

  Read the article

• Why can't I connect to my home SSH (SFTP) server? What am I doing wrong?

  - by Rolo

  I am new to this topic of creating a SFTP server on one's computer. I would like to be able to access the folder on my Windows XP computer via SFTP from another computer or a phone. The following is what I have done so far: I have installed SSH Windows and everything is setup correctly because I can access it (the folder on my pc) via WinSCP. I however cannot access it from my phone. It doesn't connect. The phone can be on the same wireless network as the Windows XP computer, but I would prefer to be able to access this when not in the same network. Now, from what I have read and understood, the following is the information needed to connect: 1) Host Name: This would be my computer's ip address which I access by typing ipconfig in a cmd prompt (I access this easily on my computer because I simply put in localhost or 127.0.0.1) 2) Port Number: That would be port 22 (I have also added this to my router in the port forwarding section). 3) Username: This would be my Windows XP username. This however is my full name, including my middle initial followed by a period. I am wondering if this is maybe causing problems in accessing it from my phone, since the name has spaces and punctuation (the period). 4) Password: The password of my Windows XP computer Extra Info: When I say phone, I mean an Android phone and I am using an ftp / sftp app to access my pc via the phone's cellular network (I also tried the wireless, but that didn't work as well). I have tried more than one program. On one program it tells me Connection timed out and on another it tells me "timeout:socket is not established" Also, I know that I can use the site noip, but I prefer to connect this way first. Also, because I am new to this, I would like to look into what exactly noip is doing and if they would be seeing my files as they are transferred from phone to pc. Thanking you in advance for your help.

  Read the article

• ubuntu 12.04 kvm virtual server network setup, can't get the machine to be connectable

  - by xyious

  I have worked on my Ubuntu Server host for weeks now and I just can not manage to get the virtual machines into the network.... here's what I need to do: I need to be able to create virtual machines that have IP addresses that can be reached from the outside (192.168 network). I need to be able to connect to the virtual machines through ssh, ftp, http and preferably https, anything else doesn't matter that much. So far everything seems simple enough and I have a lot of leeway in terms of IP address range and server/client configuration. I have the option of taking part of a /24 net as most IPs aren't used, and if it's absolutely necessary I have the option of creating a new /24 subnet. Also have the option of reformatting and reinstalling OS on the host and recreating the virtual machines as nothing has been done other than trying to get virtual machines to work. I would prefer if the virtual machines were just part of the normal network which would be 192.168.5.0/24. The host machine has 2 network cards so I don't even necessarily need the Host to be connectable in the same /24 network. I have tried (I think) just about everything from about 5 different tutorials on bridging (giving br0 the same IP that eth0 used to have (Host is able to connect to VM and vice versa, VM doesn't have outside network access), having eth0 set up like it always was and having br0 have a different IP (same as above), NAT with port forwarding (which I would have preferred not to use but will if it works), turning off one of the hosts network cards and just using one of them, different subnets.... etc. I do know my way around iptables fairly well.... Host is 64bit Ubuntu Server 12.04, using libvirt/kvm. edits: Local network is 192.168.5.0/24, host has static ip 192.168.5.254, GW .5.1 which is also nameserver. We have a second Local network at 192.168.10.0/24 with .10.1 GW, but both hosts and VMs were supposed to go into the .5 subnet. The .10 subnet isn't required, but it wouldn't be horrible if the Host were only accessible in the .10 subnet.

  Read the article

• Designing a persistent asynchronous TCP protocol

  - by dogglebones

  I have got a collection of web sites that need to send time-sensitive messages to host machines all over my metro area, each on its own generally dynamic IP. Until now, I have been doing this the way of the script kiddie: Each host machine runs an (s)FTP server, or an HTTP(s) server, and correspondingly has a certain port opened up by its gateway. Each host machine runs a program that watches a certain folder and automatically opens or prints or exec()s when a new file of a given extension shows up. Dynamic IP addresses are accommodated using a dynamic DNS service. Each web site does cURL or fsockopen or whatever and communicates directly with its recipient as-needed. This approach has been suprisingly reliable, however obvious issues have come up and the situation needs to be addressed. As stated, these messages are time-sensitive and failures need to be detected within minutes of submission by end-users. What I'm doing is building a messaging protocol. It will run on a machine and connection in my control. As far as the service is concerned, there is no distinction between web site and host machine -- there is only one device sending a message to another device. So that's where I'm at right now. I've got a skeleton server and a skeleton client. They can negotiate high-quality authentication and encryption. The (TCP) connection is persistent and asynchronous, and can handle delimited (i.e., read until \r\n or whatever) as well as length-prefixed (i.e., read exactly n bytes) messages. Unless somebody gives me a better idea, I think I'll handle messages as byte arrays. So I'm looking for suggestions on how to model the protocol itself -- at the application level. I'll mostly be transferring XML and DLM type files, as well as control messages for things like "handshake" and "is so-and-so online?" and so forth. Is there anything really stupid in my train of thought? Or anything I should read about before I get started? Stuff like that -- please and thanks.

  Read the article

• Unwanted blank lines when committing from SVN

  - by Alon_A

  I'm using CentOS Linux 5.8 as a web server and tortoise SVN for synchronizing version of our code. We write the code in Windows 7 professional 64BIT with NetBeans and NotePad++. I'm committing the code files (.php) from the Linux Shell by this command: svn co svnFolder serverFolder --username **** --password **** The problem is, after committing the files, when I'm opening them directly from the server (for debugging) by NotePad++ (I'm doing View/Edit from Filezilla) I have extra blank lines. A code that looks like this on the localhost (On NotePad++): private $producer; private $account; private $admin; private $producerEvents; private $accountProducers; private $adminAccounts; Will look like this after committing to the server (Again, on NotePad++): private $producer; private $account; private $admin; private $producerEvents; private $accountProducers; private $adminAccounts; If I upload files by FTP, No blank lines are being added. How can I solve it ? Thanks.

  Read the article

• File upload folder permission fastCGI - How to make it writeable?

  - by user6595

  I am using centos 5.7 with cPanel WHM running fastcgi/suEXEC I am trying to make a particular folder writable to allow a script to upload files but seem to be having problems. The folder (and all recursive folders) I want to be writable is: /home/mydomain/public_html/uploads And I want only scripts run by the user "songbanc" to be able to write to this directory. I have tried the following: chown -R songbanc /home/mydomain/public_html/uploads chmod -R 755 /home/mydomain/public_html/uploads But it still doesn't seem to work. The script will only upload files if I set the permissions manually via FTP client to 777. I assume I am misunderstanding how to set permission for users with fastcgi and hopefully someone can help me. Thanks in advance EDIT: Running getfacl on one of the scripts or folders gives the following: # file: home/mydomain/public_html/ripples/1.jpg # owner: songbanc # group: songbanc So it appears that the owner is correct? I'm now totally confused! EDIT 2: The plot thickens... lsattr and chattr are returning Inappropriate ioctl for device While reading flags on...

  Read the article

• Google Sites (via Apps) setup questions

  - by Dave

  I thought that it would be a piece of cake to set up a Google site via Google Apps, but perhaps my previous (limited) experience with web development has given me unrealistic expectations. I have actually had a really tough time finding help with the exact question that I have, which is: How do I change the home page contents??? You see, I'm used to having hosting with someone like GoDaddy, where I can just ftp in and drop my HTML files in the www folder. From research I have found that this is simply not possible with any flavor of Google Sites. That's fine, I can live with it. So let's say I have www.mydomain.com. When I hit that URL, it redirects me to a very long URL (unfortunately) like https://sites.google.com/a/mydomain.com/sites/system/app/pages/meta/domainWelcome, which just says: Google Apps Welcome to mydomain.com If you are the domain administrator get started creating your home page with Google Sites Great! I want to do that. So I click on the "If you are the..." link and end up at a screen where I can choose a template, a name, and some visibility options. If I click on My Sites, there isn't a "default" site, i.e. the one that www.mydomain.com displays. I figured that maybe I just have to create a site first, so I went ahead and did that. My first test was to create a site that was publicly accessible. I thought that maybe if I did that, the Google would decide that this must be my home page since it's the only one. But it doesn't, and I still get the "Welcome to" page. Under "More Actions", I didn't see anything interesting except for "Manage site". I went in there and had a peek around, and didn't see anything about using this as the default home page. Am I looking for something that just doesn't exist? I can't believe there isn't a way to modify the "domain welcome to" page...

  Read the article

• My server is taking too long to respond when I connect to it outside the local network [closed]

  - by Buzu

  I have my local server online most of the time because it is easy for clients to access a url and see how their project is coming along. They can see updates in real time. However, I got a message from one of my clients saying that the server was not responding. I have a hosts file, and in that file I have my server's address pointed to the local ip. This is because some problem with the ftp. Due to this setup, I had not noticed that the server was not accessible from outside the local network. The address is http://imbuzu.dyndns.info SSH works fine, I can connect from my windows machine to the server, but HTTP does not. The server is taking too long to respond. Looking at the logs, I see that the last incoming connection to the server from outside the network is this: 77.242.153.180 - - [04/Dec/2012:12:11:01 -0800] "\xce\x89\x8d\x85b\ro" 400 317 "-" "-" I'm going to restart the server, but I doubt that will have any effect on it. --EDIT-- I restarted the server, and it did not help. Also, I pinged the server and it seems to be resolving correctly.

  Read the article

• unmanaged VPS account; Beginners questions

  - by pesar2

  I have a classified website which uses MySQL, PHP, Solr (java) etc etc... I wonder where I should start after purchasing a VPS package from my provider. There are first of all several packages, I am going with Linux because as far as I know it is the most stable system. But I have never used Linux before! What is Ubuntu, and which version of it should I get? Whats 64bit Ubuntu then? How do I install php, javascript, mysql, java and all that? What is debian, do I need it? What is apache, do I need that? And most importantly, what applications do I need, that I must have? (I mean applications which a beginner would never know was needed, what do you recommend?) After getting the vps, how do I even access it? Do I type in some kind of IP into the browser? Or is it by ftp program? How do I access the so called "terminal"? Please guide me, I am completely new to Linux and VPS! Thanks

  Read the article

< Previous Page | 221 222 223 224 225 226 227 228 229 230 231 232  | Next Page >