Search Results

Search found 7875 results on 315 pages for 'wired networking'.

Page 226/315 | < Previous Page | 222 223 224 225 226 227 228 229 230 231 232 233  | Next Page >

  • New to networking had to reinstall xp what does blank in Default Gateway mean?

    - by waterfallraini
    I have reinstalled windows xp and posted about not being able to connect to the Interenet. I did go and ensure all drivers are there and now when I type ipconfig/all I get physical address, dhcp enabled, autoconfiguration enabled, autoconfiguration Ip address, subnet mask and then a line that says default gateway where default gateway is the only line with no numbers or anything next to it. My wireless connection works but how can I get this ethernet connection to work. This was working prior to this fresh reinstall.

    Read the article

  • I wired up a z 80 using telephone wire and put a jump to 0000 0000 0000 0000

    - by john
    I put 1100 0011 0000 0000 0000 0000 in the 2764 eprom --- this is supposed to test the z80 -- I have a 555 timer running at 500 khz. Can this small program work with the z80 ? I looked at the address pins on a m465 oscilloscope. The address shows highs up to 0100 0000. I think it should only count to 0000 0000 0000 0011. Can the z80 be tested? The Santa Clara Valley also made the lm1871 radio control chip that could not show a high or a low without completing the entire rc loop.

    Read the article

  • Suspend not working after kernel update on an HP Envy14 1050

    - by leoxweb
    I just update ubuntu 12.04 to the kernel 3.2.0-30 and together with it a lot of packeges in the system. I am running it on an HP Envy14 1050. When I first made a fresh install of the clean ubuntu 12.04 I had the problem that when restoring from suspend the screen was black, although some backlight was there. I could fix it following this https://bugs.launchpad.net/ubuntu/+source/linux/+bug/989674/comments/20. Now, after the update the black screen after suspend has reappeared but with no backlight at all and the led in the caps lock key blinking. The laptop is using a ATI radeon 5600 with the privative drivers. During the update process there was an error with depmod . You can see the /var/log/dist-upgrade/apt-term.log file at the end. UPDATE: suspend is not working at all. The problem is not when restoring from suspend, but when I try to suspend the system it gets blocked and the fan running. Only option is to press power button. Log started: 2012-09-12 00:46:46 (Reading database ... 198909 files and directories currently installed.) Removing icedtea-7-jre-cacao ... Selecting previously unselected package linux-image-3.2.0-30-generic. (Reading database ... 198901 files and directories currently installed.) Unpacking linux-image-3.2.0-30-generic (from .../linux-image-3.2.0-30-generic_3.2.0-30.48_amd64.deb) ... Done. Preparing to replace icedtea-7-jre-jamvm 7~u3-2.1.1~pre1-1ubuntu3 (using .../icedtea-7-jre-jamvm_7u7-2.3.2-1ubuntu0.12.04.1_amd64.deb) ... Unpacking replacement icedtea-7-jre-jamvm ... Preparing to replace openjdk-7-jre-lib 7~u3-2.1.1~pre1-1ubuntu3 (using .../openjdk-7-jre-lib_7u7-2.3.2-1ubuntu0.12.04.1_all.deb) ... Unpacking replacement openjdk-7-jre-lib ... Preparing to replace openjdk-7-jre-headless 7~u3-2.1.1~pre1-1ubuntu3 (using .../openjdk-7-jre-headless_7u7-2.3.2-1ubuntu0.12.04.1_amd64.deb) ... Unpacking replacement openjdk-7-jre-headless ... Preparing to replace python-problem-report 2.0.1-0ubuntu12 (using .../python-problem-report_2.0.1-0ubuntu13_all.deb) ... Unpacking replacement python-problem-report ... Preparing to replace python-apport 2.0.1-0ubuntu12 (using .../python-apport_2.0.1-0ubuntu13_all.deb) ... Unpacking replacement python-apport ... Preparing to replace apport 2.0.1-0ubuntu12 (using .../apport_2.0.1-0ubuntu13_all.deb) ... apport stop/waiting Unpacking replacement apport ... Preparing to replace apport-gtk 2.0.1-0ubuntu12 (using .../apport-gtk_2.0.1-0ubuntu13_all.deb) ... Unpacking replacement apport-gtk ... Preparing to replace firefox-globalmenu 15.0+build1-0ubuntu0.12.04.1 (using .../firefox-globalmenu_15.0.1+build1-0ubuntu0.12.04.1_amd64.deb) ... Unpacking replacement firefox-globalmenu ... Preparing to replace firefox 15.0+build1-0ubuntu0.12.04.1 (using .../firefox_15.0.1+build1-0ubuntu0.12.04.1_amd64.deb) ... Unpacking replacement firefox ... Preparing to replace firefox-gnome-support 15.0+build1-0ubuntu0.12.04.1 (using .../firefox-gnome-support_15.0.1+build1-0ubuntu0.12.04.1_amd64.deb) ... Unpacking replacement firefox-gnome-support ... Preparing to replace firefox-locale-en 15.0+build1-0ubuntu0.12.04.1 (using .../firefox-locale-en_15.0.1+build1-0ubuntu0.12.04.1_amd64.deb) ... Unpacking replacement firefox-locale-en ... Preparing to replace firefox-locale-es 15.0+build1-0ubuntu0.12.04.1 (using .../firefox-locale-es_15.0.1+build1-0ubuntu0.12.04.1_amd64.deb) ... Unpacking replacement firefox-locale-es ... Preparing to replace firefox-locale-zh-hans 15.0+build1-0ubuntu0.12.04.1 (using .../firefox-locale-zh-hans_15.0.1+build1-0ubuntu0.12.04.1_amd64.deb) ... Unpacking replacement firefox-locale-zh-hans ... Preparing to replace totem-mozilla 3.0.1-0ubuntu21 (using .../totem-mozilla_3.0.1-0ubuntu21.1_amd64.deb) ... Unpacking replacement totem-mozilla ... Preparing to replace libtotem0 3.0.1-0ubuntu21 (using .../libtotem0_3.0.1-0ubuntu21.1_amd64.deb) ... Unpacking replacement libtotem0 ... Preparing to replace totem-plugins 3.0.1-0ubuntu21 (using .../totem-plugins_3.0.1-0ubuntu21.1_amd64.deb) ... Unpacking replacement totem-plugins ... Preparing to replace totem 3.0.1-0ubuntu21 (using .../totem_3.0.1-0ubuntu21.1_amd64.deb) ... Unpacking replacement totem ... Preparing to replace totem-common 3.0.1-0ubuntu21 (using .../totem-common_3.0.1-0ubuntu21.1_all.deb) ... Unpacking replacement totem-common ... Preparing to replace gir1.2-totem-1.0 3.0.1-0ubuntu21 (using .../gir1.2-totem-1.0_3.0.1-0ubuntu21.1_amd64.deb) ... Unpacking replacement gir1.2-totem-1.0 ... Preparing to replace glib-networking-common 2.32.1-1ubuntu1 (using .../glib-networking-common_2.32.1-1ubuntu2_all.deb) ... Unpacking replacement glib-networking-common ... Preparing to replace glib-networking 2.32.1-1ubuntu1 (using .../glib-networking_2.32.1-1ubuntu2_amd64.deb) ... Unpacking replacement glib-networking ... Preparing to replace glib-networking-services 2.32.1-1ubuntu1 (using .../glib-networking-services_2.32.1-1ubuntu2_amd64.deb) ... Unpacking replacement glib-networking-services ... Preparing to replace linux-firmware 1.79 (using .../linux-firmware_1.79.1_all.deb) ... Unpacking replacement linux-firmware ... Preparing to replace linux-generic 3.2.0.29.31 (using .../linux-generic_3.2.0.30.32_amd64.deb) ... Unpacking replacement linux-generic ... Preparing to replace linux-image-generic 3.2.0.29.31 (using .../linux-image-generic_3.2.0.30.32_amd64.deb) ... Unpacking replacement linux-image-generic ... Selecting previously unselected package linux-headers-3.2.0-30. Unpacking linux-headers-3.2.0-30 (from .../linux-headers-3.2.0-30_3.2.0-30.48_all.deb) ... Selecting previously unselected package linux-headers-3.2.0-30-generic. Unpacking linux-headers-3.2.0-30-generic (from .../linux-headers-3.2.0-30-generic_3.2.0-30.48_amd64.deb) ... Preparing to replace linux-headers-generic 3.2.0.29.31 (using .../linux-headers-generic_3.2.0.30.32_amd64.deb) ... Unpacking replacement linux-headers-generic ... Preparing to replace linux-libc-dev 3.2.0-29.46 (using .../linux-libc-dev_3.2.0-30.48_amd64.deb) ... Unpacking replacement linux-libc-dev ... Preparing to replace openjdk-7-jre 7~u3-2.1.1~pre1-1ubuntu3 (using .../openjdk-7-jre_7u7-2.3.2-1ubuntu0.12.04.1_amd64.deb) ... Unpacking replacement openjdk-7-jre ... Preparing to replace openjdk-7-jdk 7~u3-2.1.1~pre1-1ubuntu3 (using .../openjdk-7-jdk_7u7-2.3.2-1ubuntu0.12.04.1_amd64.deb) ... Unpacking replacement openjdk-7-jdk ... Preparing to replace policykit-1-gnome 0.105-1ubuntu3 (using .../policykit-1-gnome_0.105-1ubuntu3.1_amd64.deb) ... Unpacking replacement policykit-1-gnome ... Preparing to replace xserver-xorg-input-synaptics 1.6.2-1ubuntu1~precise1 (using .../xserver-xorg-input-synaptics_1.6.2-1ubuntu1~precise2_amd64.deb) ... Unpacking replacement xserver-xorg-input-synaptics ... Processing triggers for ureadahead ... ureadahead will be reprofiled on next reboot Processing triggers for hicolor-icon-theme ... Processing triggers for shared-mime-info ... Unknown media type in type 'all/all' Unknown media type in type 'all/allfiles' Unknown media type in type 'uri/mms' Unknown media type in type 'uri/mmst' Unknown media type in type 'uri/mmsu' Unknown media type in type 'uri/pnm' Unknown media type in type 'uri/rtspt' Unknown media type in type 'uri/rtspu' Processing triggers for man-db ... Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for desktop-file-utils ... Processing triggers for gnome-menus ... Processing triggers for gconf2 ... Processing triggers for libglib2.0-0:i386 ... Processing triggers for libglib2.0-0 ... Setting up linux-image-3.2.0-30-generic (3.2.0-30.48) ... Running depmod. update-initramfs: deferring update (hook will be called later) Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/dkms 3.2.0-30-generic /boot/vmlinuz-3.2.0-30-generic Error! Problems with depmod detected. Automatically uninstalling this module. DKMS: Install Failed (depmod problems). Module rolled back to built state. run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.2.0-30-generic /boot/vmlinuz-3.2.0-30-generic update-initramfs: Generating /boot/initrd.img-3.2.0-30-generic run-parts: executing /etc/kernel/postinst.d/pm-utils 3.2.0-30-generic /boot/vmlinuz-3.2.0-30-generic run-parts: executing /etc/kernel/postinst.d/update-notifier 3.2.0-30-generic /boot/vmlinuz-3.2.0-30-generic run-parts: executing /etc/kernel/postinst.d/zz-update-grub 3.2.0-30-generic /boot/vmlinuz-3.2.0-30-generic Generating grub.cfg ... Found linux image: /boot/vmlinuz-3.2.0-30-generic Found initrd image: /boot/initrd.img-3.2.0-30-generic Found linux image: /boot/vmlinuz-3.2.0-29-generic Found initrd image: /boot/initrd.img-3.2.0-29-generic Found linux image: /boot/vmlinuz-3.2.0-23-generic Found initrd image: /boot/initrd.img-3.2.0-23-generic Found memtest86+ image: /boot/memtest86+.bin Found Windows 7 (loader) on /dev/sda1 Found Windows Recovery Environment (loader) on /dev/sda2 Found Windows Recovery Environment (loader) on /dev/sda3 done Setting up python-problem-report (2.0.1-0ubuntu13) ... Setting up python-apport (2.0.1-0ubuntu13) ... Setting up apport (2.0.1-0ubuntu13) ... apport start/running Setting up apport-gtk (2.0.1-0ubuntu13) ... Setting up firefox (15.0.1+build1-0ubuntu0.12.04.1) ... Please restart all running instances of firefox, or you will experience problems. Setting up firefox-globalmenu (15.0.1+build1-0ubuntu0.12.04.1) ... Setting up firefox-gnome-support (15.0.1+build1-0ubuntu0.12.04.1) ... Setting up firefox-locale-en (15.0.1+build1-0ubuntu0.12.04.1) ... Setting up firefox-locale-es (15.0.1+build1-0ubuntu0.12.04.1) ... Setting up firefox-locale-zh-hans (15.0.1+build1-0ubuntu0.12.04.1) ... Setting up libtotem0 (3.0.1-0ubuntu21.1) ... Setting up totem-common (3.0.1-0ubuntu21.1) ... Setting up totem (3.0.1-0ubuntu21.1) ... Setting up totem-mozilla (3.0.1-0ubuntu21.1) ... Setting up gir1.2-totem-1.0 (3.0.1-0ubuntu21.1) ... Setting up totem-plugins (3.0.1-0ubuntu21.1) ... Setting up glib-networking-common (2.32.1-1ubuntu2) ... Setting up glib-networking-services (2.32.1-1ubuntu2) ... Setting up glib-networking (2.32.1-1ubuntu2) ... Setting up linux-firmware (1.79.1) ... Setting up linux-image-generic (3.2.0.30.32) ... Setting up linux-generic (3.2.0.30.32) ... Setting up linux-headers-3.2.0-30 (3.2.0-30.48) ... Setting up linux-headers-3.2.0-30-generic (3.2.0-30.48) ... Examining /etc/kernel/header_postinst.d. run-parts: executing /etc/kernel/header_postinst.d/dkms 3.2.0-30-generic /boot/vmlinuz-3.2.0-30-generic Setting up linux-headers-generic (3.2.0.30.32) ... Setting up linux-libc-dev (3.2.0-30.48) ... Setting up policykit-1-gnome (0.105-1ubuntu3.1) ... Setting up xserver-xorg-input-synaptics (1.6.2-1ubuntu1~precise2) ... Setting up openjdk-7-jre-headless (7u7-2.3.2-1ubuntu0.12.04.1) ... Installing new version of config file /etc/java-7-openjdk/security/java.security ... Installing new version of config file /etc/java-7-openjdk/jvm-amd64.cfg ... Setting up openjdk-7-jre-lib (7u7-2.3.2-1ubuntu0.12.04.1) ... Setting up icedtea-7-jre-jamvm (7u7-2.3.2-1ubuntu0.12.04.1) ... Setting up openjdk-7-jre (7u7-2.3.2-1ubuntu0.12.04.1) ... Setting up openjdk-7-jdk (7u7-2.3.2-1ubuntu0.12.04.1) ... update-alternatives: using /usr/lib/jvm/java-7-openjdk-amd64/bin/jcmd to provide /usr/bin/jcmd (jcmd) in auto mode. Processing triggers for libc-bin ... ldconfig deferred processing now taking place Log ended: 2012-09-12 00:49:16

    Read the article

  • Can Android do peer-to-peer ad-hoc networking?

    - by Doughy
    Is it possible to set up Android in ad-hoc peer-to-peer wifi mode? For example, I would like to have one phone broadcast a message, and have all peers in the network receive the broadcast, without having a server. I would like to use wifi since bluetooth range is more limited.

    Read the article

  • feedback for programming newbies looking to build a social networking site?

    - by kgardnr
    my partner and i are launching a social learning platform - the requirements have been mapped out and are quite basic/intuitive. we are familiar with html/css, and have some very basic understanding of php, but we would love some feedback on whether we should tackle this ourselves or not. we've built websites, but in the past relied mostly on pre-fab code, i.e. wordpress, ning, etc. we've been looking specifically at ruby for developing the network, but i haven't delved into it fully yet. we're looking for some guidance and feedback - e.g. thoughts on ruby on rails? what's the learning curve? are we getting in over our heads? thanks in advance!

    Read the article

  • C# networking app - should I use sockets or something else? [closed]

    - by Harun
    I am developing a network based application. I need to retrieve data through internet. The scenario is like this - a client machine will send data through internet to the server machine and data size will be big enough. So should i use simple TCP/IP socket concept or else? Because i never did a socket program which will retrieve data through internet..... Any suggestion will be very helpful....... Thanks.

    Read the article

  • What is the best Networking implementation for my application?

    - by CaptainPhil
    I am in the planning phases of a project for myself, it is to be a single and multi-player card game. I would like to track statistics for each person such as world rankings etc... My problem is I do not know the best approach for the client - server architecture and programming. My original goal was to program everything in C# as I want to get proficient in that language. My original idea was to have a back-end database and a back end server run on some sort of hosting on the internet, however that seems costly for such a small project that may or may not make any money. I have tried looking into cloud services however I am unfamiliar with the technology, and I am not sure I can make them suit my needs, especially since most like Google's cloud wants you to use their coding architecture from what I understand. Finally my last problem is that I would like an architecture that can be used for different languages so that I can port it from PC to IPhone, Xbox etc... So does anyone have any advice on the best architecture and language to do this in? Am I worrying about architecture and back-end costs to much and should just concentrate on getting the game running any which way?

    Read the article

  • Ubuntu 10.04, I cannot get my computer to connect to the internet

    - by Jared Isaacson
    So at first I was unable to get my Belkin Surf & Share usb to install on my computer, so then I plugged my computer directly into my router and my computer won't acknowledge any connection. I know very little about how to use ubuntu, please help me. What I do know is: I'm using Ubuntu 10.04 Lucid Lynx In my 'edit connections', I go into 'wired' tab, select "wired connection 1" then 'edit' it brings up 4 tab options: Wired (I input the MAC address that's printed on the bottom of my router, MTU is set to automatic) 802.1x Security (currently: not checked) IPv4 Settings (currently: Automatic (DHCP) addresses only) IPv6 Settings (currently: Automatic)

    Read the article

  • wireless not showing up in network manager applet.

    - by Vidur Vishnudutt
    there is only the wired connection option available when the menu drops down. i have installed a belkin wireless g card for my desktop. it has been used before on this version of ubuntu 10.10, but after upgrading it shows only wired networks. enable networking and enable notifications have both been ticked. still only wired networks coming. im using ubuntu 10.10 maverick meerkat on my desktop comp and im an absolute begginer at ubuntu. can some one please help me re enable wireless on my comp?

    Read the article

  • Getting wifi working on 14.04

    - by user286114
    I have installed Ubuntu 14.04 on my laptop. When I plug in the ethernet cable the internet works fine, but I can't see any wireless network in the networking manager. The wifi switch is definitely on on my laptop! It's a Dell XPS M1330. I'm not sure what the network card is - how can I find out? nm-tool gives me this: NetworkManager Tool State: connected (global) - Device: eth0 [Wired connection 1] ------------------------------------------- Type: Wired Driver: tg3 State: connected Default: yes HW Address: 00:23:AE:28:FE:A2 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.1.26 Prefix: 24 (255.255.255.0) Gateway: 192.168.1.254 DNS: 192.168.1.254

    Read the article

  • Using sed to delete string

    - by wired
    I was hacked and have hundreds of .js files with this line of code that I'm trying to get rid of: ;document.write('<iframe src="http://sitecorporatemanagement.ru/pretzellogmeins.cgi?8" scrolling="auto" frameborder="no" align="center" height="3" width="3"></iframe>'); It is the last line of the file, but I think the file contains windows line endings, because when ever I do this: sed -i '/sitecorporatemanagement.ru/d' * it deletes the full content of the file. Can you help me get this to work? I just need that full string deleted. Thank you for all the help you can give.

    Read the article

  • Specifying network settings during SLES 11 auto installation

    - by banjer
    I'm setting up an autoinst.xml file for auto-installing SLES 11. I get prompted for the various interface settings per below, but they don't seem to stick once the server reboots. I don't think I have the xml defined correctly. I'm hoping someone has experience with this. <ask-list> <ask> <path>networking,dns,hostname</path> <question>Enter Hostname (server name)</question> <stage>initial</stage> <default>merkin</default> </ask> <ask> <path>networking,interfaces,interface,0,device</path> <question>Enter the primary ethernet device:</question> <stage>initial</stage> <default>eth0</default> </ask> <ask> <path>networking,interfaces,interface,0,ipaddr</path> <question>Enter the primary IP Address:</question> <stage>initial</stage> </ask> <ask> <path>networking,interfaces,interface,0,netmask</path> <question>Enter the Netmask Address:</question> <stage>initial</stage> </ask> <ask> <path>networking,routing,routes,route,0,gateway</path> <question>Enter the primary Gateway Address:</question> <stage>initial</stage> </ask> </ask-list> The first one for hostname seems to be sticking just fine, but the rest do not. As an alternative, is there a way to stop the autoinstall at the section where you configure the network devices so that the user can take over? I was able to show the partition proposal, but not sure how to do the same with the networking setup.

    Read the article

  • Debian - starting UFW (Uncomplicated Firewall) before network interfaces are operational

    - by Tomasz Zielinski
    I want to install UFW on Debian Lenny. Everything looks straightforward except that I don't know where to plug UFW startup script so that it configures iptables before hax0rs can break in. I've reviewed runlevel directories and in /etc/rc0.d, /etc/rc6.d and /etc/rcS.d there are items like these: S35networking -> ../init.d/networking S36ifupdown -> ../init.d/ifupdown Runlevel 0 and 6 are for shutdown and reboot so I guess nothing should be changed there, but runlevel S advertises itself (in README) like something for me: The scripts in this directory whose names begin with an 'S' are executed once when booting the system, even when booting directly into single user mode. The following sequence points are defined at this time: * After the S40 scripts have executed, all local file systems are mounted and networking is available. All device drivers have been initialized. (What bothers me is that both rc0/6.d and rcS.d point to the same networking and ifupdown scripts, but after looking at sources I believe those scripts are smart enough to figure out where to start and where to stop networking.) Now, I think that I should plug my /lib/ufw/ufw-init into /etc/rcS.d, with priority higher that the one of ifupdown and networking, i.e. <= 38 for my /etc/rcS.d. Am I right in this "analysis" ?

    Read the article

  • Fedora 12 on Vmware network disabled on restore

    - by Chaitanya
    I have a fedora 12 guest running on VMWare on windows 7. I use it mainly for the occasional linux dev. Whenever I restart the guest, networking works fine. But if I close the VMware player and save state, the next time I start the image, networking is disabled (red x on the network icon. message saying networking disabled). I can't seem to find a way to restore networking. I have to reboot the guest to get my network access back again. My Ubuntu image doesn't have this problem. I can close the player and when I re run the image, I can pick up where I left off, with all the open firefox windows and application windows as I left them. Fedora saves state, but doesn't seem to enable networking. There is a relevant warning I have seen "SELinux is preventing /sbin/ifconfig "read" access to/var/run/vmware-active-nics." But I am not sure how to solve it. I know fedora isn't officially supported by VMware, but it seems to be working fine for the most part and meeting my needs, except for this one little issue. Any help would be much appreciated.

    Read the article

  • Developing Good Contacts

    There are millions of was you can develop good networking contacts, but you must be open to meeting new people. In the information technology industry, everyone is a potential client. So any place you can meet people is a good place to develop good networking contacts. Here are a few examples Online Discussion Forums – Online forums are a great place to show your knowledge of a subject and allow you to meet people that share your same interests Blog Networks – Allowing others to read your thoughts and comment on them. In addition, you can so the same on other blogs with in the network. Networking Sites – Networking sites are a great way to find new contacts based on your current contacts because you can share common friends, and possibly common interests Volunteering – Volunteering is a great way to meet new contacts, and you can help others at the same time Civic Organizations – Participating in organizations or clubs like the Lions Club, Rotary Club, and religious affiliated organizations because you can meet people of all walks of life, and can share and contribute ideas for common goals Chamber of Commerce – This is another great way to meet contacts especially if you are interested in starting your own business. The chamber is a great way to meet other business oriented people who are always looking to collaborate and improve their business. Family and Friends – Family and friends are another excellent to meet new contacts, because they can always be on the lookout for opportunities for you. For example your brother hears that a friend of his needs a new website, so he gives him your number and highly recommends you. This is really good because the potential client is looking for the service you can perform, and you where already highly recommend.

    Read the article

  • How do I prevent a website being misclassified by Websense?

    - by Jeff Atwood
    I received the following email from a user of one of our websites: This morning I tried to log into example.com and I was blocked by Websense at work because it is considered a "social networking" site or something. I assume the websense filter is maintained by a central location, so I'm hoping that by letting you guys know you can get it unblocked. per Wikipedia, Websense is web filtering or Internet content-control software. This means one (or more) of our sites is being miscategorized by Websense as "social networking" and thus disallowed for access at any workplace that uses Websense to control what websites their users can and cannot access during work hours. (I know, they are monsters!) How do we dispute this Websense classification error, as our websites should generally be considered "information technology" and never "social networking"? How do we know what category Websense has put our sites in, so we can pro-actively make sure they're not wrong?

    Read the article

  • No Wi-Fi after system reboot

    - by ILya
    Something strange is happening... I've installed a Wi-Fi card into my Ubuntu Server 11.04 machine. To configure it I do the following: sudo vi /etc/network/interfaces add: iface wlan0 inet dhcp wpa-driver wext wpa-ssid "Sweet Home" wpa-ap-scan 1 wpa-proto WPA wpa-pairwise TKIP wpa-group TKIP wpa-key-mgmt WPA-PSK wpa-psk <A KEY> auto wlan0 then: $ sudo /etc/init.d/networking restart * Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces * Reconfiguring network interfaces... ssh stop/waiting ssh start/running, process 1522 ssh stop/waiting ssh start/running, process 1590 And my machine successfully gets an ip to my wireless adapter. But after reboot it doesn't get any ip in wireless network. To fix it I run /etc/init.d/networking restart again and all is fine again - it gets an ip. I understand that I simply should add it to my startup scripts to make it work properly, but maybe there is a better way to configure it?

    Read the article

  • Network is not working anymore - Ubuntu 12.04

    - by Jonathan
    Network is not working anymore - Ubuntu 12.04 Hello, I have a problem with my network connection. I have been using the same laptop with Ubuntu and the same connection for more than a year, and suddenly yesterday the connection stopped working (both wireless and wired). I've tested with another computer and the connection is fine (both wireless and wired). I've been reading similar posts but I haven't found a solution yet. I tried a few commands that I'm posting here (my system is in spanish, so I have traslated it to english, maybe the terms are not accurate): grep -i eth /var/log/syslog | tail Jun 3 18:45:40 vanesa-pc NetworkManager[3584]: (eth0): now managed Jun 3 18:45:40 vanesa-pc NetworkManager[3584]: (eth0): device state change: unmanaged - unavailable (reason 'managed') [10 20 2] Jun 3 18:45:40 vanesa-pc NetworkManager[3584]: (eth0): bringing up device. Jun 3 18:45:40 vanesa-pc NetworkManager[3584]: (eth0): preparing device. Jun 3 18:45:40 vanesa-pc kernel: [ 7351.845743] forcedeth 0000:00:0a.0: irq 41 for MSI/MSI-X Jun 3 18:45:40 vanesa-pc kernel: [ 7351.845984] forcedeth 0000:00:0a.0: eth0: no link during initialization Jun 3 18:45:40 vanesa-pc kernel: [ 7351.847103] ADDRCONF(NETDEV_UP): eth0: link is not ready Jun 3 18:45:40 vanesa-pc NetworkManager[3584]: (eth0): deactivating device (reason 'managed') [2] Jun 3 18:45:40 vanesa-pc NetworkManager[3584]: Added default wired connection 'Wired connection 1' for /sys/devices/pci0000:00/0000:00:0a.0/net/eth0 Jun 3 18:45:40 vanesa-pc kernel: [ 7351.848817] ADDRCONF(NETDEV_UP): eth0: link is not ready ifconfig -a eth0 Link encap:Ethernet addressHW 00:1b:24:fc:a8:d1 ACTIVE BROADCAST MULTICAST MTU:1500 Metric:1 Packages RX:0 errors:16 lost:0 overruns:0 frame:16 Packages TX:123 errors:0 lost:0 overruns:0 carrier:0 colissions:0 length.tailTX:1000 Bytes RX:0 (0.0 B) TX bytes:26335 (26.3 KB) Interruption:41 Base address: 0x2000 lo Link encap:Local loop Inet address:127.0.0.1 Mask:255.0.0.0 Inet6 address: ::1/128 Scope:Host ACTIVE LOOP WORKING MTU:16436 Metrics:1 Packages RX:1550 errors:0 lost:0 overruns:0 frame:0 Packages TX:1550 errors:0 lost:0 overruns:0 carrier:0 colissions:0 long.tailTX:0 Bytes RX:125312 (125.3 KB) TX bytes:125312 (125.3 KB) iwconfig lo no wireless extensions. eth0 no wireless extensions. sudo lshw -C network *-network description: Ethernet interface product: MCP67 Ethernet manufacturer: NVIDIA Corporation Physical id: a bus information: pci@0000:00:0a.0 logical name: eth0 version: a2 series: 00:1b:24:fc:a8:d1 capacity: 100Mbit/s width: 32 bits clock: 66MHz capacities: pm msi ht bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=forcedeth driverversion=0.64 latency=0 link=no maxlatency=20 mingnt=1 multicast=yes port=MII resources: irq:41 memoria:f6288000-f6288fff ioport:30f8(size=8) memoria:f6289c00-f6289cff memoria:f6289800-f628980f lsmod Module Size Used by usbhid 41906 0 hid 77367 1 usbhid rfcomm 38139 0 parport_pc 32114 0 ppdev 12849 0 bnep 17830 2 bluetooth 158438 10 rfcomm,bnep binfmt_misc 17292 1 joydev 17393 0 hp_wmi 13652 0 sparse_keymap 13658 1 hp_wmi nouveau 708198 3 ttm 65344 1 nouveau drm_kms_helper 45466 1 nouveau drm 197692 5 nouveau,ttm,drm_kms_helper i2c_algo_bit 13199 1 nouveau psmouse 87213 0 mxm_wmi 12859 1 nouveau serio_raw 13027 0 k8temp 12905 0 i2c_nforce2 12906 0 wmi 18744 2 hp_wmi,mxm_wmi video 19068 1 nouveau mac_hid 13077 0 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp forcedeth 58096 0 Let me know if I can give you more information. Thank you very much in advance, Jonathan

    Read the article

  • How To Get Google+ Invites?

    - by Gopinath
    Google Plus is a new social networking service from Google and it’s aimed to compete with the social networking giant Facebook. Google’s attempts at social networking in the past were never a hit (few of them were miserable fails – Google Wave, Google Buzz) but this time Google seems to be getting things. Google Plus is an invite only service at the moment and you can’t access it without an initiation. So far Google sent invitations to selected bloggers and high profile web users. If you want an invite to Google Plus visit official Google Plus invitation request page and register your email id. There is no word from Google on when the invites will be distributed to public users. Hopefully Google should roll out invitations soon. This article titled,How To Get Google+ Invites?, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

    Read the article

  • Website misclassified by websense

    - by Jeff Atwood
    I received the following email from a user of one of our websites: This morning I tried to log into example.com and I was blocked by websense at work because it is considered a "social networking" site or something. I assume the websense filter is maintained by a central location, so I'm hoping that by letting you guys know you can get it unblocked. per Wikipedia, Websense is web filtering or Internet content-control software. This means one (or more) of our sites is being miscategorized by websense as "social networking" and thus disallowed for access at any workplace that uses websense to control what websites their users can and cannot access during work hours. (I know, they are monsters!) How do we dispute this websense classification error, as our websites should generally be considered "information technology" and never "social networking"? How do we know what category websense has put our sites in, so we can pro-actively make sure they're not wrong?

    Read the article

  • Android application Database Framework

    - by Marek Sebera
    When creating mobile (specially Android) application, I usually come to touch with similar pattern of working with data. Usually I need to fetch some remote data (covered by authorization process) to local cache. And on next request: Check networking Check presence of cache file Check version of cache file (if networking) Get new version and save cache (if networking and file not in cache, or outdated) Data store is no-SQL JSON Document-Based (and yes, I know about CouchDB Android version, but it doesn't fit my needs yet.) Process of authorizing to data source and code for check version of local cache is adapted to application. But the other code (handling network, saving cache, handling exceptions,...) is always the same. Is there any Data Store helper I can use, which provides functions I described above?

    Read the article

< Previous Page | 222 223 224 225 226 227 228 229 230 231 232 233  | Next Page >