Search Results

Search found 12431 results on 498 pages for 'errors'.

Page 227/498 | < Previous Page | 223 224 225 226 227 228 229 230 231 232 233 234  | Next Page >

  • Only some motherboards can support faster RAM?

    - by Wesley
    This is a question relating to one of my builds. Here are the specs: ECS P4VXASD2+ V5.0 motherboard Intel P4 Northwood 2.8 GHz (533 MHz FSB, 512 KB L2) 2x 1GB PC3200 DDR RAM Maxtor 300GB IDE HDD 16 MB NVIDIA TNT2 Pro AGP OKIA 300W ATX PSU Gigabyte 52x CD-ROM The issue right now is that I'm trying to install Windows XP from the CD drive but the computer randomly restarts partway through installation. My other build was BSODing due to RAM latency errors. This ECS board manual states that memory modules "up to 333 MHz" (i.e. PC2700) is supported. However, I am running PC3200 modules, which is clearly faster than PC2700. Would this be causing the computer from randomly restarting? EDIT 1: I also wanted to mention that my Emachines T2482 is actually running 2x 512MB PC3200 DDR RAM when it should only be supporting PC1600 and PC2100 DDR RAM. Yet there are no issues with it.

    Read the article

  • Why does my computer show a black screen when booting into Windows Vista?

    - by dassouki
    Today, I removed some old software from dad's vista, and installed SP1. After which the computer restarted and it went into a "black" screen. I left it running for a few hours, and the laptop was really hot. I tried to get into safemode, start from last known good start up, but nothing seemed to work. i know it stops after loading \windows\system32\drivers\cplir.sys what's going on and how can I fix his computer? Update I'm still unable to fix my install. Repair and restoring the OS fail. The laptop has the vista partition built into it. I can't boot through a USB, and my other computer doesn't have a cd/dvd writer Update 2 I tried chkdisk /f and although it fixed some errors, I still get the black screen of death.

    Read the article

  • Replacing old SSL cert with a new one with IIS

    - by Wookie321
    I purchased a new cert for my web server (GoDaddy) rather than renewed the current one. In the IIS manager, whenever I do the "Complete certificate request..." and then add my new cert it seems to accept it fine, but when I go off this screen and go back, the cert isn't there? I haven't seen any errors, but I thought it might be because I'm adding a cert with the same friendly name as the old one. I don't want to remove the old cert quite yet, is there a way around this?

    Read the article

  • Apache configuration to accept all data

    - by ServerDown
    Hi, I have apache running on port 7979 to talk with a device that sends data to webserver and later will run php scripts to process and send reply xml. The problem now is that it sends data like POST HTTP/1.1 Content-Type:text/xml Content-Length:369 Followed by XML When apache sees this it gives a 400 error. Since the device cannot be changed is there any way to accept the full data sent from the device and write to some log? Currently apache simply keeps sending 400 errors back. If there was a way to log the entire xml or create some custom handler for 400 error then the xml could be read by a php script. Looking forward to solutions.

    Read the article

  • Outlook pst problem

    - by tking
    I've used outlook pst files in the past with great success. a few weeks ago I exported about 2 years worth of email into a pst file. size is around 1.5 gb. when i try ti import that pst back into my outlook it says its not a pst file. I've tried to repair it using pstscan and it repairs errors and will even mount it in Outlook but Outlook cant see any emails, like its an empty pst file. Is there any other way to recover my emails besides loading up backupexec and recovering my mailbox before i made the pst?

    Read the article

  • OpenLDAP with StartTLS broken on Debian Lennny

    - by mr.zog
    I'm trying to get OpenLDAP on Lenny to work with StartTLS. I have a Fedora 13 machine which I'm using as a client for testing. So far the Fedora client is ignoring the 'host' directive in /etc/ldap.conf when I try to connect using ldapsearch. The client wants to connect to 127.0.0.1:389 even if I specify -H ldaps://server.name on when using ldapsearch. /etc/ldap.conf on the client machine is in mode 444. But even when I try connecting locally from an ssh session, I see errors like this: ldap_sasl_interactive_bind_s: Can't contact LDAP server (-1) Someone hit me with a cluebat, plz. Update: you must use ~/.ldaprc for settings such as 'host'.

    Read the article

  • "Bad response to Storage command" when scheduling job with Bacula

    - by Joril
    I have a Bacula setup with 9 clients, and it's working happily. Today I had to add another client, so I went and copied+adapted the existing configuration files from another client, but when I schedule a job for the new client, I get these errors: 20-Mar 17:50 tools-dir JobId 39: Start Backup JobId 39, Job=BackupPresenze2.2012-03-20_17.50.49_04 20-Mar 17:50 tools-dir JobId 39: Using Device "FileStorage" 20-Mar 17:50 presenze2-fd JobId 39: Fatal error: Failed to connect to Storage daemon: bacula.mylan.local:9103 20-Mar 17:50 tools-dir JobId 39: Fatal error: Bad response to Storage command: wanted 2000 OK storage , got 2902 Bad storage From the client I can telnet to bacula.mylan.local:9103 just fine, and jobs for other clients work successfully... What could I check? (Server and client run Ubuntu 10.04, if it's relevant)

    Read the article

  • Windows XP Home Edition SP3 cant recognise PCMIA SD Card

    - by Pozo
    System Specifications: Laptop : Dell Inspiron 6000 OS: Windows Home Edition SP3 SD Adapter: Hagiwara Smart Media Adapter I inserted the card into the slot, windows xp recognises the device, lists the pcmia controller on the device manager list, an entry appears under the IDE ATA/ATAPI category on the device manager as well. However, the device does not show under my computer and the driver does not get assigned a letter number. I checked the system logs from the device manager and there were no logged errors. Checking the Hagiwara support website, the manufacturer indicates that the adapter driver is the same as the windows xp pcmia controller. Checking Dell's website, no specific drivers were listed for that either. General Search on the web indicates that multiple people face similar problems with their SD cards, yet none actually spell out the route issue that causes this. Please let me know if you have any suggestions for further debugging. Thanks in advance

    Read the article

  • Installing a new SQL Server instance fails

    - by Rubio
    I've previously in my setup installed SQL Server Express 2005. Now I've switched to SQL Server Express 2008. I updated the command line parameters to those documented for the latter. If the comp already has SQL Server Express 2008 installed, my installer should create a new instance. The command line parameters are as follows: /ACTION=Install /FEATURES=SQLEngine /QS /INSTANCENAME=ABCD /SECURITYMODE=SQL /SAPWD=CunningPassword The requested instance name does not exist on the target machine. This will end in an error -2068643838. The logs show the following error: "No features were installed during the setup execution. The requested features may already be installed." If I remove the /QS parameter and try to install interactively, I'll get as far as the Feature Selection page. The UI shows three options, Instance Features, Shared Features and Redistributable Features. Whatever I select, clicking Next results in the same error (There are validation errors on this page). Any ideas anyone?

    Read the article

  • nodejs server hanging from time to time

    - by Johann Philipp Strathausen
    I have a node server (0.6.6) running an Express application, along with Mongoose and s3, on an Ubuntu 11.04 machine. Several times per hour, the server is hanging. That means that the application is working fine, I see the express loggings, and then all of a sudden the server stops responding. No errors, no traces, no loggings, and strangely enough the browser won't show the request even in the network debugging window. From any machine in the local network it's the same behaviour. I restart the server and it's okay again for several minutes, then again starts to hang, everytime while doing something different. The same application on Amazon on the same Ubuntu version works fine and never hangs. I know all this is kind of vague, but I don't know where to start. Has any of you seen something like this before? Any idea?

    Read the article

  • Solution to time shifting requirement in Active Directory

    - by MikeR
    Hi, I currently have an active directory that has several child domains (consisting of nothing other than a DC and bespoke application servers) set-up for testing our CRM software, as some of it is date/time sensitive these have been set to dates in the future at some point in the past, which is causing replication errors. I'm working on getting rid of these child domains, but still have a requirement for our testers to be able to time shift. Does anyone know of any solutions that would allow our test environments to have their time changed (always forward), without affecting the production active directory? Is it as simple as creating a separate Forest on the same LAN or would that interfere with my production Forest? Thanks for any advice.

    Read the article

  • Suggestion for boot manager in external hard disk

    - by Korrupzion
    Hi, I just bought an 1TB External Hard drive with eSATA, USB, FW400/800 (LaCie if you are interested). I already put the windows 7 installation in a FAT32 active partition so i can plug the HDD via USB, since my notebook or other computers doesn't support boot via eSATA commonly, and it works. Now i want to do more partitions so i'm looking for a way to have a boot manager as active partitions that allows me to boot from different partitions in my HDD (win7, ubuntu installations for example) I want to know if you know any software to do this or you already have this system. Thanks and sorry i have too many grammar errors because english is not my native language :)

    Read the article

  • X11 for apache user

    - by fuenfundachtzig
    We are using inkscape to convert SVG images uploaded to our server via a web form. For this inkscape offers a batch mode via the -z option, but this batch mode has a flaw: When inkscape is run by the apache user, it breaks saying $ inkscape -z -W drawing.svg X11 connection rejected because of wrong authentication. The application 'inkscape' lost its connection to the display localhost:11.0; most likely the X server was shut down or you killed/destroyed the application. If you do the same as a normal user you also get errors: Xlib: connection to "localhost:11.0" refused by server Xlib: PuTTY X11 proxy: MIT-MAGIC-COOKIE-1 data did not match (inkscape:24050): Gdk-CRITICAL **: gdk_display_list_devices: assertion `GDK_IS_DISPLAY (display)' failed 301.27942 But at least inkscape gives the correct answer (here the number stating the width of the image). Does somebody know how to make this also work for the apache user? Does it make sense to authorize apache to use X (if so how)? In any case it doesn't feel like the right solution...

    Read the article

  • Remote Desktop fails with no error

    - by Duane
    Recently, I've been having problems connecting to a remote machine via RDP. I can connect fine exactly once, but all subsequent attempts fail until the remote machine is rebooted. I seem to authenticate properly, but the RDP logon dialog disappears after showing, "Configuring remote session..." for a few seconds. No errors or other useful info is written either to my screen or the Event Logs of the two machines involved. I've tried disabling remote sound as others have suggested, with no success. I'm still investigating a solution, but would appreciate any thoughts. Fortunately, I can reboot the box remotely w/o causing any problems, but this is a less than ideal workaround.

    Read the article

  • Excel Matching problem with logic expression

    - by abelenky
    I have a block of data that represents the steps in a process and the possible errors: ProcessStep Status FeesPaid OK FormRecvd OK RoleAssigned OK CheckedIn Not Checked In. ReadyToStart Not Ready for Start I want to find the first Status that is not "OK". I have attempted this: =Match("<>""OK""", StatusRange, 0) which is supposed to return the index of the first element in the range that is NOT-EQUAL (<) to "OK" But this doesn't work, instead returning #N/A. I expect it to return 4 (index #4, in a 1-based index, representing that CheckedIn is the first non-OK element) Any ideas how to do this?

    Read the article

  • What does this WinImage Error Mean?

    - by Kryten
    Hi, I am using WinImage (version 8.0) on Windows XP SP3 to create a VHD File from my Hard Drive, however, everytime I try to, everytime it says: "I/O error in reading data on position 000000007cd40000:00010000. Error 23: Data Error (cyclic redundancy check)." with the options "Abort", "Retry", "Skip" & "Skip All". Everytime I try "Retry" the message comes, if I click skip another message comes up (same as above, except the data position). I have run "CHKDSK /F /R" several times, but the error always appears. What is wrong? Can I safely skip the Errors? Is there anything I can do to fix the error?

    Read the article

  • Error when running adprep32 /rodcprep, trying to add a 2008 domain controller to a 2003 domain

    - by virtuist
    I'm trying to migrate a Small Business Server 2003 to Server 2008 domain. The problem is when I run the adprep32 /rodcprep command as specified as the final step in Step 3 of this article: http://www.experts-exchange.com/Software/Server_Software/Email_Servers/Exchange/A_2881-Migrate-Small-Business-Server-2003-to-Exchange-2010-and-Windows-2008-R2.html I get an error "Adprep could not contact a replica for partition..." which is described in detail here: http://support.microsoft.com/kb/949257 I've also attached the AdPrep.log file for full details. So when I try to run DCPromo on my new Server 2008 PDC (it's not the PDC yet, but want it to be soon), I get an error saying that /rodcprep hasn't ran so there could be errors if I continue. Anyone ran into this or have any suggestions on how to help? Can Dsmgmt be ran on server 2003 to help solve this? Assuming it's a partition error.

    Read the article

  • Java Issues in Microsoft Internet Explorer & Firefox with Java 6 Standard

    - by sxanness
    I have a user on Windows XP SP3 running Java 6 Standard Edition Update 20 (build 1.6.0_20-b02). The issue is that when Java applets load the Java splash screen is very shaky (I will have to take a screenshot if you don't know what I am talking about) and than the Java applet screen does not show properly. The Applet we use most is for a security camera and you can't view the camera properly because of the Java issues. I have uninstalled Java and re-installed and still having the same issue. I do not see any errors on the Java Console, and this only happens on his computer I am running the same version of Java and the browsers and do not have the same issue on my machine.

    Read the article

  • Windows 7 Taskbar disappears overnight

    - by eidylon
    Hello all, I've got this problem that started happening recently. Overnight, something is happening that makes my taskbar disappear on my laptop. The Start orb is still there, and if I click it, it pops up the start menu, but the whole rest of the taskbar, including the background behind the start orb, is just completely vanished: tray icons, running programs, clock, everything. I tried killing explorer.exe and restarting it, but it doesn't restart. And after killing it, Task Manager won't let me start ANY programs. It gives no errors, just ... doesn't run them. Anyone else see this or know what it might be? I'm running Windows 7 RC on an IBM ThinkPad R51 with 2GB ram.

    Read the article

  • Sporadic disk clicking sound

    - by Abdó
    Hi, I'm having some unusual and sporadic hard disk clicking issues. Here is a cronological description of the facts. I'm using an ASUS P6T-SE with Intel Core i7, 6Gb RAM 600W Power supply and ATI4670 graphics, running Ubuntu 10.10. About one month ago my hard disk (SATA II Seagate Barracuda 1Tb 7200 rpm) started making a clicking sound: a sort of loud tic-tac, every second or so, when involved in disk activity. The system was clearly slower than before at disk access, but it was functional and I could not find any signal of trouble on the linux logs. I disconnected the disk and tried an older SATA drive I had around: no problem with it. Then I reconnected the Seagate disk, and the problem was mysteriously gone. Ubuntu booted normally, usual speed, no clicking. A couple of weeks later, the problem reappeared. I tried disconnecting reconnecting (as it somehow solved the problem before) without luck. So, despite it was a rather new drive, I assumed it was a hardware issue, made backups and bought a new drive. The new drive is a SATA II Seagate Barracuda 1.5 Tb 7200 rpm. I installed both drives at the same time, with the intention of transferring my files from on to the other. To my surprise, when I booted the computer with both drives, both started making the clicking sound !! Even worse, I removed the old drive, leaving the unformated new drive connected, and booted from a LiveCD. It kept clicking ! Puzzled by this, I tried both drives on my laptop with a SATA to USB cable. At the moment I connected any of them, they made one or two unusual clicks and immediately stopped doing that and worked normally. The old drive I thought almost dead, was working like a charm as if nothing happened. Then I thought: "ok, it must be the motherboard. Let's try again". So, I reconnected the old drive to the ASUS P6T motherboard (the same cables and SATA port as before), and it worked as if nothing happened ! The problem was gone again. The new 1.5 Tb drive was also working ok: No clicking nor slowdown. So I left the old 1Tb disk connected and kept using the computer daily during 3 weeks, until today it happened again. Now I don't really know what to do or check. I'm not even sure if it is a hardware issue any more ! This is rather annoying as it seems it happens with a period of 2 or 3 weeks and I have no means of forcing it to happen. Does anyone have a clue of what can causes this behaviour or have any suggestions of things I should check when it happens again ? What I did today is checking some SMART parameters Error log: smartctl -l error /dev/sda. No errors Short selftest: smartctl -t short /dev/sda. No errors Disk Health check: smartctl -H /dev/sda. passed And here are the vendor specific parameters (smartctl -A /dev/sda) Which I'm not quite sure how to interpret. === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 120 099 006 Pre-fail Always - 235962588 3 Spin_Up_Time 0x0003 095 095 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 187 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 072 060 030 Pre-fail Always - 16348045 9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 3590 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 94 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 097 000 Old_age Always - 4295164029 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 070 057 045 Old_age Always - 30 (Lifetime Min/Max 19/31) 194 Temperature_Celsius 0x0022 030 043 000 Old_age Always - 30 (0 18 0 0) 195 Hardware_ECC_Recovered 0x001a 037 026 000 Old_age Always - 235962588 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 73950746906346 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 1832967731 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 3294986902 Any clue to this mystery will be really welcome. Thank you very much !!

    Read the article

  • PDF Encrypted, Hidden Watermark

    - by Dave Jarvis
    Background Using LaTeX to write a book. When a user purchases the book, the PDF will be generated automatically. Problem The PDF should have a watermark that includes the person's name and contact information. Question What software meets the following criteria: Applies encrypted, undetectable watermarks to a PDF Open Source Platform independent (Linux, Windows) Fast (marks a 200 page PDF in under 1 second) Batch processing (exclusively command-line driven) Collusion-attack resistant Non-fragile (e.g., PDF - EPS - PDF still contains the watermark) Well documented (shows example usages) Ideas & Resources Some thoughts and findings: Natural language processing (NLP) watermarks. Apply steganography on a randomly selected image. http://openstego.sourceforge.net/cmdline.html The problem with NLP is that grammatical errors can be introduced. The problem with steganography is that the images are sourced from an image cache, and so recreating that cache with watermarked images will impart a delay when generating the PDF (I could just delete one image from the cache, but that's not an elegant solution). Thank you!

    Read the article

  • Creating a vm using Hyper-V causes the host of BSOD

    - by Arcass
    Hi, Problem description: When I try to create a virtual machine, the host bsod part way through the process. From the logs in lookes to fail/hang on the "Creating new VirtualDisckDriver with new VHD" step. The BSOD error code is SYSTEM_SERVICE_EXCEPTION : STOP:0x0000003B When the machine has finished restarting, it looks to have created the vhd and XML files for the vm but it isn't accessable. I have two server bothing behaving in exactly the same way, so I don't believe it's a hardware fault. Has anyone had a similar experince? How did you resolve the problem? NOTES Hardware: HP DL380 G6 BIOS : 2010.03.30 (14 Apr 2010) [Latest from HP website] Inter Hyperthreading: Disabled Intel Virtuazation Technology : Enabled No-Execute Memory Protection: Enabled Mem check reports no errors OS: Windows 2008 Sp2 x64bit fully updated regards Arcass

    Read the article

  • What causes Windows Boot to stall?

    - by Nick Berardi
    For about 6 months now I have been having this weird problem where Windows 7 fails to fully boot correctly. What happens is this. Starting Windows shows up on the screen. Then 3 out of 4 times nothing else happens, no Windows Flag animation, just nothing occurs. After 3 or 4 restarts repeating steps 1-2 above, the Windows Flag animation finally shows up and everything works as expected. My question is what is causing this problem in steps 1 and 2? Because I have tried the following with no luck: Error checking and correcting of any disk errors Updating drivers Doing a clean install of Windows 7 My setup is as follows: Windows 7 64-bit Ultimate 8 GB RAM 128 GB Crucial SSD (firmware 0005) Dell Latitude E6410 Intel Wireless and Graphics Other than what I have tried above I am totally out of ideas and looking for some new ones to try.

    Read the article

  • Minutely cron, ensuring only a single instance

    - by Christopher Nadeau
    Is there a way to run a script every minute (or 2, or 5, etc), but only if it isn't already running? We have a set of scripts that need to run every minute. Sometimes they might start and finish in a second, other times they might go on for 5 minutes. Our current way of avoiding simultaneous executions is by setting a is_running flag in each script, and exiting if it's still enabled. But this is a little unreliable (i.e., fatal errors would cause the flag to remain enabled even after the script halted). We could write our own little manager, but I'm wondering if there is a more fashionable solution that already exists.

    Read the article

  • How to repair Java in Ubuntu after trying to switch to Java 6 using update-java-alternatives

    - by Kau-Boy
    I tried to switch from Java 5 to Java 6 using the "update-java-alternatives" command like explained on this page: https://help.ubuntu.com/community/Java But afterwards I get the following error when I tried to execute java: root@webserver:~# java Error occurred during initialization of VM Could not reserve enough space for object heap Could not create the Java virtual machine. I also tried to reinstall the java binaries using "apt-get" but I didn't succeed reinstalling it. I would like to post the "apt-get" errors, but unfortunately I don't know how to print out the error messages in English and not in German. My system is a Ubuntu 8.04 ROOT server.

    Read the article

< Previous Page | 223 224 225 226 227 228 229 230 231 232 233 234  | Next Page >