Search Results

Search found 10741 results on 430 pages for 'linton day'.

Page 227/430 | < Previous Page | 223 224 225 226 227 228 229 230 231 232 233 234  | Next Page >

• MacPro will freeze after first startup and first time screen saver activates

  - by Rob Segal

  I've run into a bizarre situation every time my MacPro first starts up in the morning when I get to work and the screen saver activates for the first time. When I try to deactivate the screen saver hitting the keyboard or mouse nothing will happen. At best I will get one of the following... Able to move the mouse but clicking does nothing Login prompt will show up but typing on the keyboard does nothing At worst the screen will be fully locked. In all cases I will have to reboot my machine to get it to work again. After this initial restart the machine is fine for the rest of the day. Anyone encountered something like this before?

  Read the article

• RAM module randomly stopped working

  - by nhinkle

  My laptop is a Dell Inspiron e1505. It came with 2x512 MB of RAM installed, and about a year and a half ago I decided to upgrade it to 2x1 GB. I bought two 1GB memory modules from newegg and installed them, and all worked fine. Just last night my laptop was working fine; this morning I booted up and there was a BIOS warning saying "amount of system memory has changed". I tried reseating the modules, but that didn't fix it. Then I removed each one individually, and determined that one of the sticks appears to no longer be working. This happened very abruptly - I hadn't noticed any problems which might have been indicative of impending failure. Does anybody have any clue what may have caused this, and if there's any hope of making it work again? The memory only had a 30 day warranty, so I can't RMA it.

  Read the article

• Configure spamassassin to mark very similar messages as spam

  - by Caleb Gray

  Users on my server have been receiving spam, consistently, for some time now. I have most of spamassassin's plugins enabled, and I have made sure to enable verbose logging, where I can see that all of the plugins are working. Why is it, then, that my users are able to receive the same exact junk mail several times in a day without the message being flagged in some way? Here are the relevant headers of an email that I personally have received several copies of: X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on sub.domain.tld X-Spam-Level: *** X-Spam-Status: No, score=3.0 required=4.0 tests=BAYES_50,FSL_HELO_NON_FQDN_1, HELO_NO_DOMAIN,HTML_MESSAGE,RCVD_IN_BRBL_LASTEXT,RDNS_NONE autolearn=no version=3.3.1 Have I accidentally missed the plugin that can see that I, and others, have received the same message multiple times in a short period of time?

  Read the article

• Remote desktop session ends abruptly with a "protocol error"

  - by Jon

  Intermittently we get a problem where a remote desktop session will get disconnected with the error message “Because of a protocol error, this session will be disconnected. Please try connecting to the remote computer again.” We are getting this with one server only which is running Windows Server 2008, connecting with Windows 7 clients. The session itself stays running, you just get disconnected, and you can try and reconnect. Sometimes you get in for a while then it will kick you out. We are connecting from Windows 7 clients. We have tried connecting using Cord on a Mac and this works fine, so it's not like the session itself is corrupted. One problem is that there are some critical applications running under the session (I know, let's not discuss the idiocy of that), so we cannot reset the session in any way during the working day – so any diagnostics must have minimum impact. Thanks, Jon

  Read the article

• Windows bios fails to boot up, keeps resetting

  - by Dwayne Diamond

  When I turn the computer on this error always happens wher jus after it starts up this screen pops up wher it says F1 to enter BIOS setup or F2 to start Windows Normally and if I press F2 it goes into Windows but freezez then I hav 2 turn the pc off, Problem is the BIOS + Date and Time keeps resetting itself somehow and it's not the battery because I put a new one in so when I manage 2 load default settings and get it working after some struggle and I shut down the pc the next day I switch the pc on and does the whole process again... What could this problem be and how can I fix it??? Thank you

  Read the article

• I want to version control my entire slice

  - by Tom

  I'm renting a slice (i.e., a VPS) from Slicehost. I've a spent a day or two filling up /usr with my favorite packages, /etc with configs and init scripts, and so on. Now I want to: save this whole setup somewhere (e.g., to load onto another machine). see what changes I've made to which files revert changes, tag revisions, and all that other good version control stuff Saving a disk image gives me (1), but not (2) and (3). Using Subversion (svn import / svn://someotherhost) might give me all three, but I expect problems if I actually try to check a project out into / and maintain .svn directories in root-owned areas. And to load my setup onto a fresh slice, I'd need to install an svn client on it first. Is there a good way to do what I want to do?

  Read the article

• Is there a Windows 7 equivalent to the *NIX ability to create a hard link to /dev/null?

  - by minameismud

  I saw another question here that the Windows equivalent to /dev/null is simply NUL. I also know that you can use the mklink command to make sym links (shortcuts) from the command line: MKLINK [[/D] | [/H] | [/J]] Link Target /D Creates a directory symbolic link. Default is a file symbolic link. /H Creates a hard link instead of a symbolic link. /J Creates a Directory Junction. Link specifies the new symbolic link name. Target specifies the path (relative or absolute) that the new link refers to. When I try to use the /j switch to make a hard link ("junction") instead of a simple shortcut to NUL, I get: C:\>mklink /j "C:\Program Files\MyNewHardlinkFolder" NUL Local volumes are required to complete the operation. I can create shortcuts to NUL all day long using the /d switch, but I would much prefer the hard link. Any ideas?

  Read the article

• Troubleshoot odd large transaction log backups...

  - by Tim

  I have a SQL Server 2005 SP2 system with a single database that is 42gigs in size. It is a modestly active database that sees on average 25 transactions per second. The database is configured in Full recovery model and we perform transaction log backups every hour. However it seems to be pretty random at some point during the day the log backup will go from it's average size of 15megs all the way up to 40gigs. There are only 4 jobs that are scheduled to run on the SQL server and they are all typical backup jobs which occur on a daily/weekly basis. I'm not entirely sure of what client activity takes place as the application servers are maintained by a different department. Is there any good way to track down the cause of these log file growths and pinpoint them to a particular application, or client? Thanks in advance.

  Read the article

• Google Chrome 4.0.249.89 not working

  - by tommieb75

  Good day to you, I am running Google Chrome 4.0.249.89 and noticed a weird behavior with it. It loads but I get this error, notice there is an absent of commonly used pages in the display itself and displays the message. Upon closer inspection within the directory which I've captured here on pastebin.com Has google chrome ceased to function after a certain limit...? I have tried the setup --rename-chrome-exe trick which did not work...I just don't want to lose my bookmarks... Thanks for your help, Best regards, Tom.

  Read the article

• Linux Live CD for old computer

  - by Joel Coehoorn

  I have a pentium II (that's right, pentium II) with a scant 200MB of ram. This was a high-end workstation in it's day. The machine currently runs dos on a raid array, and I need to pull some data from it. I figure my best chance at this is to use a linux live cd to copy the data to one of our active directory network shares (there is a network card in the machine). Unfortunately, my linux skills are abysmal, so I'm not sure where to get started: Where should I look to find a linux cd that will run well on such an old system Since I'm likely gonna need to be command-line only, what do I need to do to configure the network card and mount the network share via the command line? Bonus points: exact syntax needed to copy and convert the entire volume for use in VMware server 2.0, but really just copying all the data should be enough.

  Read the article

• TV video constantly skips 1/2 second, plays 1 second; green on bottom

  - by Robert

  I just got DirecTV. It worked for a day, but now the TV video constantly skips 1/2 second, then plays 1 second. Also, the bottom 5th of the screen is solid green. The audio does not skip. I tried to do "Set up TV signal" (in Media Center) - but I get an error. See the post I just made here titled "Error - “IR Hardware not detected” - but it’s installed/working." Thanks for your help.

  Read the article

• Squid ban policy

  - by VOX

  I need a requirement to let users view a particular website for an hour and then put it into ban list of that user. My company have a team of website reviewers who review their website. In most cases, when they found a good website (online RPG? social sites? web proxies) they enjoy it all the day without ever going to another sites. So I want to let them view a new website for an hour then I want to ban those websites. Is there any convenient way to do it?

  Read the article

• How to identify cause of system lock on debian squeeze?

  - by David Sanders

  I have a desktop system at work with debian squeeze installed. Every couple days or so, when I come in in the morning, the system appears to be asleep and won't wake up. I suspect it goes into power save mode and then doesn't receive the wake up signal when I click the mouse or touch the keyboard. Does anyone know where I should look in order to start tracking this down? Like log files, etc? I doubt it, but maybe the fact that I'm using a mac aluminum usb keyboard and a wireless usb mouse (that has an off switch) has something to do with it? Maybe, when I turn my mouse off at the end of the day, the system loses track of the device somehow? I dunno :P. Thanks in advance.

  Read the article

• Mail.app doesn't see mail changes; requires mailbox "rebuild"

  - by vy32

  I use Mail.app on 4 different computers to access the same mailboxes. I see the same problem on all of them --- if the Mail.app is running, then it catches all of the mail updates. But if a machine is turned off, when it turns back on the mailbox doesn't synchronize properly. I might delete 20 mail messages on one system and they are still on system #2 until I "rebuild." I have seen this happen with the Mobile Me IMAP server, with Gmail, with courier IMAP, and with dovecot. Does anybody else see this? What should I do? Is there a mail server that this happens less with? It's very frustrating, as I get 200-300 mail messages a day and frequently end up handling email messages multiple times.

  Read the article

• File property information (last write time and file size) in explorer out of date by hours over netw

  - by David L Morris

  An application is running on a windows XP prof machine picking up file from a network share from another windows machine. It detects that the file has been updated (by date and time or optionally file size) and reads it for any new data. Most of the time the last write time and file size, seems to be up to date. Occasionally, this information stops being updated, even though the file is growing (intermittently during the day) with appended content, so that the last write time and file size remain fixed at some arbitrary moment. This is visible in explorer, where it shows a fixed last write time on the reading machine. Just opening the file to edit it in notepad, immediately refreshes the file properties, and the other application picks up where it left of. The file location can't be changed, nor the location of the relevant applications. Any solutions to resolve this problem?

  Read the article

• How does Exchange 2010 prevent auto-reply loop?

  - by Beaming Mel-Bin

  E.g., 2 users have auto-reply configured. User A sends a message to User B. User B's auto-reply gets sent to User A's mailbox. That, in turn, causes an auto-reply to be sent from User A and insanity ensues. How does Exchange 2010 prevent this scenario? Also, can Exchange 2010 prevent a user's mailbox sending more than one auto-reply to the same user in one day? Bonus: Assuming Exchange prevents this, how do I configure the settings?

  Read the article

• Windows 7 just corrupted Microsoft F# and now won't fix itself.

  - by user225626

  I lost half a year's worth of custom CGAL/GMP/LEDA/Qt3/Qt4/MPFR/MPFI/Visual Studio/Boost/blahblahblah open source nonsense with DLLs that are scattered in various parts of the OS that I had gotten to finally work. All because F#, which came with .NET 4 and which I never, ever used, is now "corrupted" one day for reasons only Windows 7 knows, and now Windows 7 won't even boot. Of course none--none--of the above setup works as accessed from the USB port. How do I remove a corrupted file that prevents a Windows 7 from booting, or even being fixed by an external CD mount of the Windows 7? Thanks for any help.

  Read the article

• SGE: downtime planning

  - by mousee

  I need to plan a downtime for a maintenance of my environment (or some part of my environment) by means of Sun Grid Engine. Is it possible to somehow use backfilling information to tell the grid engine to plan only those jobs on cluster which are able to finish (i have backfilling information) till let's say 10 am next day? Can I then at 10 am rely on the fact that all compute nodes are clean, jobs are only queued, no job is planned and so that I can start maintenance? Thank you for your time. mousee

  Read the article

• Why does a Windows 7 installation grow so seriously and how to shring it?

  - by Ivan

  I store all my data and the most of applications (those legally available in "portable" versions) on drive D: and only use drive C: for the Windows system and some heavily integrated applications like MS Office, Visual Studio, Adobe Reader, Flash Player etc. When I was using Windows XP, 50 GiB drive C: was more than enough. Now, as I've mitigated to Windows 7, it hardly is. Yesterday as I've checked, 7 GiBs were free on drive C:. Then I've installed fresh Windows updates (which were just some tens of MiBs to download) and checked again: now there are only 2 GiBs free. Where have 5 GiBs gone? PS: Don't be surprised my system installation takes actually that much: I've got Visual Studio and SQL Server with complete offline documentation library, but that doesn't explain where does free space disappear on simple Windows updates. PPS: I use an augmented CCleaner version to clean my PC every day, so there are for sure no temporary internet files of recycle bin trash files taking the place.

  Read the article

• ATI Radeon Triple Monitor Setup

  - by Zak

  I have a Dell XPS 8300, and its got an ATI Radeon HD6450 installed. When running Ubuntu 12.04 the triple monitors work flawlessly. I can change the default, turn them on/off etc ... The problem is Windows 7. It is behaving much like in this thread. I know the card supports three, as it WORKS PERFECTLY in the linux portion of my dual boot. Windows can "see" all three, but will only allow two. Is this a WIndows 7 / ATI compatibility issue, or is Windows 7 just stupid (rhetorical)? Had I not had a dual boot Linux box, I might have read the above thread and thought "damn, it just won't work". But I use three monitors every day on this card, so I know it works.... Just not with Windows.

  Read the article

• How Can I Override the Remote Administrator security policy on Android 2.2 so that I can disable the lock screen?

  - by hagope

  On Android 2.2 Froyo, I added my Corporate exchange email account to the phone, however, the security policy set by the "remote administer" requires that I enter a 4-digit PIN at the lock screen and a maximum 10sec idle. How can I hack my Android, through root access or otherwise, such that I do not need to follow this security policy. I am very annoyed at having to enter the PIN every time I want to use the phone, because I open/close it so often through out the day? Please help...I'm so surprised at how difficult it is to find the answer!

  Read the article

• How to calculate Bradford Factors with Excel 2007?

  - by pnuts

  Bradford Factors are used by some to measure the significance of absenteeism and are computed for each individual as S squared * D where S is the number of spells (continuous periods of absence) and D is the sum of the days. The calculation is often made over a rolling 52 weeks. Commercial HR software often has the facility to calculate these factors but a Google search indicates quite a lot of interest without any free solutions. Using units of half a day and including any non-working days in each spell, how does one calculate the factors using Excel 2007?

  Read the article

• IBM x226 server with Windows 2003 freezing and showing one HDD degraded

  - by Zvonko Telefonko

  We have an IBM x226 server with Windows 2003 running on it. For weeks it's been very slow and it freezes at least once each day. At the boot it show message "degraded" for one HDD and optimal for other HDDs. We have 4 HDDs in it set up in Raid 1. HDD 1 - HDD 2, HDD 3 - HDD4. It seems that HDD2 is the one who is causing problems (showing degraded status). There's an amber led blinking on it together with the green one. We installed ServerRAID manager downloaded from IBM and it gave us option for "rebuild". But the server froze at some point and now it's rebuilding from start again. I've done some Googling and it says that it could be to failing HDD or some cache battery. How can we verify what is the cause of this?

  Read the article

• CentOS VM, NTP synchronization problems

  - by Spirit

  We have three CentOS 5.9 VMs on an ESX3.5 host. Because of the nature of the services we provide it is required that the NTP time is synchronized and the time is correct on all three of them. However one of them constantly drifts back each day for about 66 sec. So far none of us seems to understand as why is this happening. We included the possibility that the VM may be somehow pulling the time from the host, however all of the three VMs have identical configuration settings and they did not have VMware tools installed. Although I realize that this is probably a question of an internal matter and not to ask for on a forum, I would appreciate if anyone of you knows some CentOS NTP diagnostic routines that will help me to diagnose the problem and find a reliable solution. I thank you for the assistance.

  Read the article

• MySql calculate number of connections needed

  - by Udi I

  I am trying to figure my needs regarding web service hosting. After trying Azure I have realized that the default MySql they provide (through a third party) limits the account to 4 connections. You can then upgrade the account to 15, 30 or 40 connections (which is quite expensive). Their 15 connections plan is descirbed as: "Excellent choice for light test and staging apps that need a reliable MySQL database". I have 2 questions: if my application is a web service which needs to preform ~120k Queries a day (Normal/BELL distribution) and each query is ~150ms(duration)/~400ms(fetch), how many connection do I need? If instead of using cloud computing, I will choose a VPS, how many connections will I be able to handle on a 1GB 2 cores VPS? Thank you!

  Read the article

< Previous Page | 223 224 225 226 227 228 229 230 231 232 233 234  | Next Page >