Search Results

Search found 16894 results on 676 pages for 'block device'.

Page 228/676 | < Previous Page | 224 225 226 227 228 229 230 231 232 233 234 235  | Next Page >

• Ubuntu installation does not recognize drive partinioning

  - by Woltan

  I have a 1TB drive and installed Windows 7 on a 128GB partition. When I now try to install Ubuntu 11.04 it does not recognize the Windows partition but offers the complete 1TB drive to install Ubuntu on instead. It displays: However, in the Ubuntu Disk Utility the Windows partitions are recognized. What do I need to do in order for Ubuntu to recognize the Windows 7 partition and install Ubuntu as a dual boot? Response to comments The following commands were executed and the results are shown below: fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x34a38165 Device Boot Start End Blocks Id System /dev/sda1 * 1 13 102400 7 HPFS/NTFS Partition 1 does not end on cylinder boundary. /dev/sda2 13 16318 130969600 7 HPFS/NTFS Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x14a714a6 Device Boot Start End Blocks Id System /dev/sdb1 1 60801 488384001 83 Linux parted -l Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. Error: /dev/sr0: unrecognised disk label

  Read the article

• Lost WiFi after 12.10 upgrade

  - by Steven Guillory

  I received my new Dell Vostro 2420 last week, and just got around to upgrading from 11.10 to 12.10. Unfortunately, like many others (after researching the issue), I no longer have WiFi. I have tried every sudo command given that worked for others, and still can't get my wireless to function. I am new to Linux, so any and all help is appreciated. Thanks in advance! Edit: I can connect via ethernet, just not via wifi. As a matter of fact, when I use Fn + F2 to turn on wifi, only my bluetooth comes on. lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 4 (rev c4) 00:1c.5 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 6 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 07:00.0 Network controller: Broadcom Corporation Device 4365 (rev 01) 09:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07) This is what I am getting... dpkg: error: --install needs at least one package archive file argument Type dpkg --help for help about installing and deinstalling packages [*]; Use dselect or aptitude for user-friendly package management; Type dpkg -Dhelp for a list of dpkg debug flag values; Type dpkg --force-help for a list of forcing options; Type dpkg-deb --help for help about manipulating *.deb files; Options marked [*] produce a lot of output - pipe it through less or more !

  Read the article

• What's the best way to compare blocks in a matching game that can be multiple colors?

  - by Ryan Detzel

  I have a match 3-4 game and the blocks can be one of 7 colors. There are an addition 7 blocks that are a mix of the original 7 colors so for example there is a red and blue block and there is also a red/blue block which can be matched with either the red or the blue. My original thought is just to use binary operations so. int red = 0x000000001; int blue = 0x000000010; int redblue = 0x000000011; Then just do an & operation so see if they match. Does this sound like a decent plan or am I over complicating it? edit: Better yet so it's more readable. int red = 1; int blue = 2; int red_blue = 3; int yellow = 4; int red_yellow = 5; maybe as defines or static vars?

  Read the article

• USB and CD data cannot be read or mounted in 12.10

  - by aravind4j

  I'm using Ubuntu 12.10. I wrote a data disk using Brasero Disk Burner, but the system cannot read the CD. I tried to write the same data into my HP v220w pen drive but now there is an error in that too. It shows the following: Error mounting /dev/sdb at /media/aravind4j/Aravind4j: Command-line `mount -t "ntfs" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,dmask=0077,fmask=0177" "/dev/sdb" "/media/aravind4j/Aravind4j"' exited with non-zero exit status 13: $MFTMirr does not match $MFT (record 0). Failed to mount '/dev/sdb': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details. (udisks-error-quark, 0) I used a NTFS file system for the pen drive as you can recognize from the above statement. I would like to recover the files so please help me recover the files without formatting the drive.

  Read the article

• Hibernation to a swap file 12.04, fragfile output

  - by MrHug10

  I've been trying for some time now, to get hibernation working in Ubuntu 12.04 on my Dell XPS17. I dualboot Windows 7 and Ubuntu, each having their own partition and one shared partition for all my data and documents. As I would like to be able to swtich from ubuntu to windows without losing all the things I was currently doing in Ubuntu, I would like to be able to use hibernation. In order to achieve this I've followed the information at http://ubuntuforums.org/showthread.php?t=1042946. Only instead of creating my swap file on my linux partition (which is formatted: ext4), I've chosen to create one on my shared partition (which is formatted: ntfs). There is a problem with this though (at least, that's what I think the problem is), because when I call: sudo filefrag -v /media/data/Ubuntu_Swap_Space/6GiB.swap, I get the following output: Filesystem type is: 65735546 File size of /media/Data/Ubuntu_Swap_Space/6GiB.swap is 6442450944 (1572864 blocks, blocksize 4096) Discontinuity: Block 22 is at 25829097 (was 232498) /media/Data/Ubuntu_Swap_Space/6GiB.swap: 2 extents found So I'm not sure what I need to fill in as an offset to follow the rest of the earlier mentioned information. I've tried both the location of block 22 and the number that is listed after that, but when I then try sudo pm-hibernate nothing happens and this shows up in my /var/log/pm-suspend.log s2disk: Could not use the resume device (try swapon -a). Reason: No such device Hope someone can help me out with this! If you need more information about anything, please let me know!

  Read the article

• Why does Ubuntu 13.10 not detect my Win7 partition?

  - by goutham

  I'm trying to install Ubuntu 13.10 alongside Windows 7 on my DELL INSPIRON 14z 5423 laptop and I'm new to all of this. I'm using the Ubuntu 13.10 64-bit ISO burned onto a CD. The first time I tried to install it, Ubuntu said it did not detect any other OS, which meant I only had 4 options: Erase disk and install Ubuntu (I don't want to do this) Encrypt new Ubuntu. Use LVM. Something else. If I choose the Something else option, it brings me to the partition menu and says that I have 1 disk with free space of (500Gb), but that's not true because I have Windows 7. I restarted the laptop several times and booted the CD again and I got exactly the same as I did previously. How do fix this problem and install Ubuntu alongside Windows 7? After executing "sudo fdisk -l" command in terminal ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xd2b811c5 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 314574847 157184000 7 HPFS/NTFS/exFAT /dev/sda3 314574848 629147647 157286400 7 HPFS/NTFS/exFAT /dev/sda4 629147648 976771071 173811712 7 HPFS/NTFS/exFAT After removing one partition I executed command once again ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xd2b811c5 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 629145599 314469376 7 HPFS/NTFS/exFAT /dev/sda3 629147648 976771071 173811712 7 HPFS/NTFS/exFAT

  Read the article

• How to Use a PIN Instead of a Password in Windows 8

  - by Taylor Gibb

  Entering your full password on a touch screen device can really become a pain in the neck, luckily for us we can link a short 4 digit PIN to our user account and log in with that instead. Note: PIN codes are nowhere near as safe as using an alphanumeric password, however, they do still have a purpose when you don’t want to enter your 15 character password on a touch screen device. Creating a PIN Press the Win + I keyboard combination to bring up the Settings Charm, then click on the Change PC settings link. This will open up the Modern UI PC Settings app, where you can click on the Users section. On the right hand side you will see a Create a PIN button, click on it. Now you will need to verify that you are the owner of this user account by entering your password. Then you can choose a PIN, remember that it can only contain digits. Now when you get to the login screen you will have the option to use a PIN. How To Boot Your Android Phone or Tablet Into Safe Mode HTG Explains: Does Your Android Phone Need an Antivirus? How To Use USB Drives With the Nexus 7 and Other Android Devices

  Read the article

• Running Ubuntu Server from a USB key / thumb drive (being mindful of flash's write limitations)

  - by andybjackson

  Having become disillusioned with hacking Buffalo NAS devices, I've decided to roll my own home server. After some research, I have settled on an HP Proliant Microserver with Ubuntu Server and a ZFS RAID-Z array for data. I settled on this configuration after trying and regretfully rejecting FreeNAS because the Logitech Media Server (LMS) software isn't available on the AMD64 flavour of this platform and because I think Debian/Ubuntu server is a better future-proof platform. I considered Open Media Vault, but concluded that it isn't quite yet ready for my purposes. That said, FreeNAS does include the option to run itself off a 2GB+ flash device like USB key or thumb drive. Apparently FreeNAS is mindful of the write limitations of flash devices and so creates virtual disks for running the OS, writing only the required configuration information back to flash. This would give me an extra data drive slot. Q: Can Ubuntu Server be configured sensibly to run off a flash device such as a USB key/thumb drive? If so, how? The write limitations of flash should be accounted for.

  Read the article

• Ubuntu sound volume is 40% lower than in Windows

  - by ncomx

  I have 2x 2.1 speakers connected to the computer where I have Ubuntu 12.04 installed. On the software side I've set all the volume controls to 100% with the alsamixer program. The speakers have their own volume control, maintaining those at the same level, and switching between Ubuntu and Windows (XP and 7), on windows the output volume is at least 40% higher, even when having the windows volume control at 50% (without touching the speakers volume control) it's still much higher than the sound on Ubuntu. Why can this be happening? Are there some alternative sound drivers (other than the default ones) I could test to see if it makes a difference? some info about the card: root:$ cat /proc/asound/cards 0 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xfbff4000 irq 55 1 [Generic ]: HDA-Intel - HD-Audio Generic HD-Audio Generic at 0xfbcfc000 irq 56 root:$ lspci | grep -i audio 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 02:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Cayman/Antilles HDMI Audio [Radeon HD 6900 Series] I think the one i am using is the Intel one, the other seems to be from the vga card which is an ati radeon 6950. Running gstreamer-properties and switching between alsa, oss, ossv4 and pulseaudio doesn't seem to make any difference.

  Read the article

• Set up a GUI managed firewall for other machines?

  - by Azendale

  What ways are there of setting up a firewall for traffic routed for other machines whose rules can be managed by a GUI? Can GUFW do it? FireStarter? (or should that be avoided because it is supposedly no longer updated?) *By filtering, I'm mean the traffic I am setting rules up for is not destined for this computer. It is either from or to other computers on my LAN. Say, for (a simplified, hypothetical) example: I have an ethernet connection at my dorm that I have plugged into eth0. It gets an address of 192.168.1.185 and I also have 192.168.185.0/24 routed to me, so I don't have to do any NAT. I have a hub attached to my second ethernet port (eth1) with a few Windows computers and I give addresses out of my 192.168.185.0/24 block with DHCP. How can I use my Ubuntu box to block incoming connections from eth0 that are being routed to my Windows computers and let through just a few specific ports (so fellow students can't see what files my Windows boxes are sharing via SMB)?

  Read the article

• Some info about SD card patitions after the use of the dd statment and some oiters doubts?

  - by AndreaNobili

  I am not very experienced using Linux and I have the following situation that cause me some doubts. I have wrote RaspBian (the RaspBerry linux distribution) on an SD card using Ubuntu dd statment: sudo dd if=2014-01-07-wheezy-raspbian.img of=/dev/sdb bs=1024 So if now I perform the fdisk -l statment I obtain that I have 2 partitions related to my SD card, that are the followins: Dispositivo Boot Start End Blocks Id System /dev/sdb1 8192 122879 57344 c W95 FAT32 (LBA) /dev/sdb2 122880 5785599 2831360 83 Linux And now the first doubt: the dd statment create on the SD card two partitions: 1) /dev/sdb1 that is a litle FAT32 partition (what it means (LBA)?) 2) /dev/sdb2 that is a larger Linux ext3 partition Ok...the doubt is: why it also create to me a FAT32 partition and not only a Linux ext3 partition? Ok...if I go into my computer resource I can see a device (related to my SD card) into the devices list that contains some RaspBian file, following a screenshot: And if I see the property of this device I obtain this: So, looking at the previous screenshot it seems to me that this is the small FAT32 partition, and now I have the followings doubts: If it is the smallest FAT32 partition, what contains? The RaspBian boot or what? Why, in the devices list, I have only the FAT32 partition and not also the Linux one (/dev/sdb2), to see it have I to mount it? how? Tnx

  Read the article

• My Windows Phone 7 experience: 45 days in

  - by Enrique Lima

  November 13th, 2010 was the day I got my Windows Phone 7.  It was an exciting day, a lot of anxiety too.  Over a phone? Sadly, yes! Being a Zune Pass subscriber, it was something worth looking forward too, being a consultant that relies and works with Microsoft technologies and having the option of OneNote (without converters and such) on my phone was a great thing too. Has that changed over 45 days?  No, not really.  But I find myself at the very same place I was with my iPhone, I don’t really use the music player as I spend enough time in front of a computer where I have Pandora and the Zune Desktop.  Or in a car with Satellite Radio.  As for OneNote, that keeps me hooked and with access to my notes no matter where I take them. The Device: Samsung Focus Likes: OneNote integration, Zune capabilities (just note my comment above), fast and smooth interface, calendar, tiles, the device itself. Dislikes: Heavy glitches in SharePoint interaction. And a very weird one I have experienced is, any pictures I get sent from an iPhone via email will register as an attachment but the pictures are not listed as the attachment once I open the message … weird!!  Then, of course, some apps have not made it to the platform (not sure they ever will … Pandora??!!??  Chase??!!??).  But those apps missing is not the phone, or Microsoft’s fault (IMO).  In summary, I am happy with it, and some of the missing apps have made me shift the way I work with the products or features affected … meaning I rely on my desktop stuff for that.

  Read the article

• Installing Ubuntu Server 12.04 as a software RAID 1 mirror fails to boot

  - by Jeff Atwood

  I'm installing a few new Ubuntu Server 12.04 LTS servers, and they have two 512 GB SSDs. I want them to use software RAID 1 mirroring, so I was following this document religiously step by step: https://help.ubuntu.com/12.04/serverguide/advanced-installation.html To summarize the above official documentation: to set up a software RAID 1 mirror in Ubuntu Server, you choose manual partitioning during the setup, and do this on each drive: "swap" partition of roughly RAM size "physical volume for RAID" partition for remaining drive size After that, you set up the RAID 1 mirror using the RAID partitions on drive A and B, make it ext4 and containing the root filesystem partition. Setup continues from there just fine. One caveat: I was completely unable to select the "physical volume for RAID" as bootable. When I tried to do that in setup, it had no effect: I could press enter on the "make bootable" option all day long and nothing would ever change. However, after install successfully completes, I have a big problem: the system won't boot! I get Reboot and Select proper boot device or Insert Boot Media in selected Boot device and press a key What did I do wrong? Why can't I mark that "physical volume for RAID" partition bootable during Ubuntu Server setup? Is there some way for me to make the physical volumes for RAID bootable after the fact, perhaps from a live CD or something?

  Read the article

• E: Sub-process /usr/bin/dpkg returned an error code (1)

  - by kss

  sudo apt-get install acroread, i got the following output Reading package lists... Done Building dependency tree Reading state information... Done Suggested packages: libldap2 libgnome-speech7 The following NEW packages will be installed: acroread 0 upgraded, 1 newly installed, 0 to remove and 6 not upgraded. 1 not fully installed or removed. Need to get 0 B/60.1 MB of archives. After this operation, 142 MB of additional disk space will be used. (Reading database ... 237901 files and directories currently installed.) Unpacking acroread (from .../acroread_9.5.1-1precise1_i386.deb) ... dpkg: error processing /var/cache/apt/archives/acroread_9.5.1-1precise1_i386.deb (--unpack): failed in write on buffer copy for backend dpkg-deb during `./opt/Adobe/Reader9/Browser/intellinux/nppdf.so': No space left on device No apport report written because MaxReports is reached already dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for desktop-file-utils ... Processing triggers for gnome-menus ... Processing triggers for man-db ... /usr/bin/mandb: can't write to /var/cache/man/1645: No space left on device Errors were encountered while processing: /var/cache/apt/archives/acroread_9.5.1-1precise1_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1)

  Read the article

• Repair ext4 filesystem on USB drive

  - by phineas

  Yet another filesystem question. I wanted to use a USB drive that I hadn't mounted for a month or so and was surprised by the fact Ubuntu was unable to mount it. I looked it up in the disk utility and it said it discovered a device with 17 MB instead of 2 GB. The hardware looks intact, I hope for the best for repairing the ext4 filesystem. I followed the instructions from HOWTO: Repair a broken Ext4 Superblock in Ubuntu, but I wasn't successful. # fsck.ext4 -v /dev/sdb e2fsck 1.42.5 (29-Jul-2012) ext2fs_open2: Bad magic number in super-block fsck.ext4: Superblock invalid, trying backup blocks... fsck.ext4: Bad magic number in super-block while trying to open /dev/sdb The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 Filesystem blocks are invalid, however when I run the recommended solution to try the alternate superblock, I get the following output: # e2fsck -b 8193 /dev/sdb e2fsck 1.42.5 (29-Jul-2012) e2fsck: Invalid argument while trying to open /dev/sdb plus the same error message as in the last paragraph above. Any ideas how to recover the drive? Thank you very much! Edit: testdisk won't help. I'm still stunned why the tools only discover 17 MB.

  Read the article

• Changing the Default Windows Phone 7 Deployment Target In Visual Studio 2010

  - by mbcrump

  After you download and install the January 2011 Windows Phone update, you will notice one annoying thing. The default deployment target for Windows Phone Projects in Visual Studio changes to Windows Phone 7 Device. Before the update, it defaulted to the Emulator. I found this extremely annoying as I’m more than likely going to test with the emulator before putting it on my actual device. Now to make things fair, Microsoft told you they were going to switch the default and even provided a solution, but you will have to check a tiny paragraph in the release notes. The good news is that its very easy to do: Simply navigate out to : %LocalAppData%\Microsoft\Phone Tools\CoreCon See the folder named, “10.0”? Go ahead and delete it. Now, the folder will be completely empty and if you fire up Visual Studio 2010 you will see we are now defaulting to the Emulator again. In my opinion, this should have been left at Emulator. Now, new WP7 developers will get a build error when they first start a WP7 project and will not know why until they read the error list.  Subscribe to my feed CodeProject

  Read the article

• Why do we have to use break in switch

  - by trejder

  Who decided, and basing on what concepts, that switch construction (in many languages) has to be, like it is? Why do we have to use break in each statement? Why do we have to write something like this: switch(a) { case 1: result = 'one'; break; case 2: result = 'two'; break; default: result = 'not determined'; break; } I've noticed this construction in PHP and JS, but there are probably many other languages that uses it. If switch is an alternative of if, why we can't use the same construction for switch, as for if? I.e.: switch(a) { case 1: { result = 'one'; } case 2: { result = 'two'; } default: { result = 'not determined'; } } It is said, that break prevents execution of a blocks following current one. But, does someone really run into situation, where there was any need for execution of current block and following ones? I didn't. For me, break is always there. In every block. In every code.

  Read the article

• Capturing BizTalk 2004 SQLAdapter failures

  - by DanBedassa

  I was recently working on a BizTalk 2004 project where I encountered an issue with capturing exceptions (inside my orchestration) occurring from an external source. Like database server down, non-existing stored procedure, …   I thought I might write-up this in case it might help someone …   To reproduce an issue, I just rename the database to something different.   The orchestration was failing at the point where I make a SQL request via a Response-Request Port. The exception handlers were bypassed but I can see a warning in the event log saying: "The adapter failed to transmit message going to send port "   After scratching my head for a while (as a newbie to BTS 2004) to find a way to catch the exceptions from the SQLAdapter in an orchestration, here is the solution I had.   ·         Put the Send and Receive shapes inside a Scope shape ·         Set the Scope’s transaction type to “Long Running” ·         Add a Catch block expecting type “System.Exception” ·         Set the “Delivery Notification” of the associated Port to “Transmitted” ·         Change the “Retry Count” of the associated port to 0 (This will make sure BizTalk will raise the exception, instead of a warning, and you can capture that) ·         Now capture and do whatever with the exception inside the Catch block

  Read the article

• Wireless drivers

  - by Kencer

  The results for my laptop are as below. How will i install wireless drivers and graphics? $ lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 2 (rev c4) 00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 4 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 02:00.0 Network controller: Broadcom Corporation Device 4365 (rev 01) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07) $ sudo lshw -c network *-network UNCLAIMED description: Network controller product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f0500000-f0507fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 07 serial: 3c:97:0e:85:c0:0d size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168e-3_0.0.4 03/27/12 ip=172.16.96.36 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:43 ioport:2000(size=256) memory:f0404000-f0404fff memory:f0400000-f0403fff $ rfkill list all 0: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: no

  Read the article

• You may be tempted by IaaS, but you should PaaS on that or your database cloud journey will be a short one

  - by B R Clouse

  Before we examine Consolidation, the next step in the journey to cloud, let's take a short detour to address a critical choice you will face at the outset of your journey: whether to deploy your databases in virtual machines or not. A common misconception we've encountered is the belief that moving to cloud computing can be accomplished by simply hosting one's current operating environment as-is within virtual machines, and then stacking those VMs together in a consolidated environment.  This solution is often described as "Infrastructure as a Service" (IaaS) because the building block for deployments is a VM, which behaves like a full complement of infrastructure.  This approach is easy to understand and may feel like a good first step, but it won't take your databases very far in the journey to cloud computing.  In fact, if you follow the IaaS fork in the road, your journey will end quickly, without realizing the full benefits of cloud computing.  The better option to is to rationalize the deployment stack so that VMs are needed only for exceptional cases.  By settling on a standard operating system and patch level, you create an infrastructure that potentially all of your databases can share.  Now, the building block will be database instances or possibly schemas within databases.  These components are the platforms on which you will deploy workloads, hence this is known as "Platform as a Service" (PaaS). PaaS opens the door to higher degrees of consolidation than IaaS, because with PaaS you will not need to accommodate the footprint (operating system, hypervisor, processes, ...) that each VM brings with it.  You will also reduce your maintenance overheard if you move forward without the VMs and their O/Ses to patch and monitor.  So while IaaS simply shuffles complex and varied environments into VMs,  PaaS actually reduces complexity by rationalizing to the small possible set of components.  Now we're ready to look at the consolidation options that PaaS provides -- in our next blog posting.

  Read the article

• Can't connect to Wireless Network - Ubuntu 12.04 LTS & Sabrent A111N USB Dongle

  - by Ohgodwhy

  I've been trying to connect to this network for quite some time. I can't directly connect to the router with a Wire, but can access the Router with other wireless devices without any issues. I had previously tried several other Wifi nic's but none of them would load properly. Today, i went and bought a new (supported) Sabrent A111N USB Dongle, which said explicitly that it works with Linux 2.4 +. I popped the Dongle in, and low-and-behold it immediately said that there were Available Wireless Connections. I selected my connection and tried to connect, but it just loops constantly while saying Wireless Disconnected then attempts to connect again over and over. ifconfig and iwconfig both show my device in a ready and working state. However, iwlist wlan0 scan says that there are no results found. I don't get it... At one point, I could see the CPU in the DHCP client list under the router, but it doesn't fully make the connection (something about a timeout?). Any help would be appreciated. Bus 001 Device 002: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN

  Read the article

• Why is rvalue write in shared memory array serialised?

  - by CJM

  I'm using CUDA 4.0 on a GPU with computing capability 2.1. One of my device functions is the following: device void test(int n, int* itemp) // itemp is shared memory pointer { const int tid = threadIdx.x; const int bdim = blockDim.x; int i, j, k; bool flag = 0; itemp[tid] = 0; for(i=tid; i<n; i+=bdim) { // { code that produces some values of "flag" } } itemp[tid] = flag; } Each thread is checking some conditions and producing a 0/1 flag. Then each thread is writing flag at the tid-th location of a shared int array. The write statement "itemp[tid] = flag;" gets serialized -- though "itemp[tid] = 0;" is not. This is causing huge performance lag which technically should not be there -- I want to avoid it. Please help.

  Read the article

• Issues in pulse audio in Ubuntu 11.10

  - by Kamal

  Good Morning All. I am a new ubuntu user. So please forgive me if this question is too basic. I have installed Ubuntu 11.10 in my machine. I have logged in as USER_A. My external audio device is a Headset and I was able to hear the audio properly. I need to join my Ubuntu machine to a window's domain (my office server). I followed the steps explained in http://www.ghacks.net/2010/04/21/join-a-ubuntu-machine-to-a-windows-domain/ and was successful in joining my ubuntu machine to the windows domain. sudo apt-get install likewise-open5 sudo domainjoin-cli join DOMAIN USER_B Now when I logged in as USER_B, there is no audio for this user in the same machine. I crossed check with my User_A account. There is no issues with the sound for User_A. Only for User_B, there is no audio. When I checked the sound settings of User_B, there is no device listed in Hardware, Input and Output. Whereas for User A, my Headset is listed in Input and Output. Can anyone please help me on this. Why there is no sound for User_B? Thank you.

  Read the article

• Wubi installation broken by update - now unable to mount

  - by Outspaced

  As of today, my wubi installation of Ubuntu won't boot (goes straight to 'minimal bash-like interface) and I am unable to mount it when I boot straight to Ubuntu. If I boot straight into Ubuntu (not using Wubi, not going via Windows), I am able to mount the Windows partition and see the Wubi partition there: sudo mount -t ntfs /dev/sda5 /media/winxp And from there I can see the wubi root disk: /media/winxp/ubuntu/disks/root.disk But if I try to mount this: sudo mount -o loop /media/winxp/ubuntu/disks/root.disk /media/wubi I get an error: /media/winxp/ubuntu/disks/root.disk Input/Output Error If I then try fsck: sudo fsck /media/winxp/ubuntu/disks/root.disk I get this: Input/Output Error while trying to open /media/winxp/ubuntu/disks/root.disk The Superblock could not be read or does not describe a correct etx2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt and you might want to try running e2fsk with an alternate superblock: e2fsck -b 8193 <device ... this gives me the same result. There is data on this partition that I really need to be able to access, so I can't delete and reinstall. Any help much appreciated. Thanks.

  Read the article

• How can I read a portion of one Minecraft world file and write it into another?

  - by RapierMother

  I'm looking to read block data from one Minecraft world and write the data into certain places in another. I have a Minecraft world, let's say "TemplateWorld", and a 2D list of Point objects. I'm developing an application that should use the x and y values of these Points as x and z reference coordinates from which to read constant-sized areas of blocks from the TemplateWorld. It should then write these blocks into another Minecraft world at constant y coordinates, with x & z coordinates determined based on each Point's index in the 2D list. The issue is that, while I've found a decent amount of information online regarding Minecraft world formats, I haven't found what I really need: more of a breakdown by hex address of where/what everything is. For example, I could have the TemplateWorld actually be a .schematic file rather than a world; I just need to be able to read the bytes of the file, know that the actual block data starts always at a certain address (or after a certain instance of FF, etc.), and how it's stored. Once I know that, it's easy as pie to just read the bytes and store them.

  Read the article

< Previous Page | 224 225 226 227 228 229 230 231 232 233 234 235  | Next Page >